80PLUS & ErP Directive Compliant. Low Power Consumption and High Efficiency 1U Size Power Supply! at 100 VAC 0.08W
|
|
- Elisabeth Simmons
- 5 years ago
- Views:
Transcription
1 R ack Mount HPCU-4P-X2S 8PLUS & ErP Directive Compliant. Low Consumption and High Efficiency U Size! ErP Directive Standby power:.5w max. Rack Mount Non-backup Model HPCU-4P-X2S Model Name Coding HPCU - 4 P - X 2 S HPCU-4P-X2S Description. Series name 2. Output power 3. Peak output compliant Features U size with 8 PLUS BRONZE will be scheduled. High efficiency with synchronous rectification circuit Less than W standby power complying with ErP directive Min. load current is A for all outputs. Safety standard approved (IEC/UL/CSA/CE) By building in the thermal-sensing variable speed fan, noise reduction can be realised. Standby at VAC.8W Refer to Product Page Guideline on p.3 Safety standard / Approval UL CSA EN CE CCC Reliability Grade HFA FA HOA OA Function DC start at 23 VAC.8W *Standby power is an example of actual measurement. 4. ATX output 5. output equipped 6. Standard RS 232C Stock Standard stock Continuous Max. USB TTL PFC 5VSB Silence FAN RoHS Directive U Peak 35W 4W TSFC FAN Conne ction RoHS Input AC input V (worldwide range, PFC mounted) Output Output voltage Max. current / max. power (continuous) Peak current / peak power (5 sec max.) Min. current 6A 6A 25A Total 9W 3W Total 3W Total 35W 2A 2A 3A Total 2W 36W Total 39W Total 4W A A A.5A 6W.5A 6W A.5A 7.5W 2A W A Dimensions W H D (mm) 4 9 (U size) Output connector (optional component) Main 2+4pin Main 24pin Main 2pin AT AUX 2V 4pin 2V 8pin PCI-E 6pin PCI-E 6+2pin D S-ATA FDD Refer to p.33 Detachable Output Harness for details 39 HPCU-4P-X2S Specification, design, and prices in the catalog are subject to change without prior notice. Do not copy. Copyright 23 Nipron Co., Ltd.
2 General Specification Condition: at normal temperature and humidity unless otherwise specified Items Specification Measurement conditions, etc. AC Input Output Protection Environment Insulation EMC Others Rated Voltage Input Frequency Efficiency Factor Inrush Current Input Current Rated Voltage Rated Current Max. Current / Peak Current / Min. Current Total Voltage Accuracy (%) Max. Ripple Voltage (mvp-p) Max. Spike Voltage (mvp-p) Overcurrent Protection Overvoltage Protection Dielectric Strength Insulation Resistance Leakage Current Line Noise Immunity Conducted Emission Safety Standard OCP Point (A) Method Recovery OVP Point (V) Method Recovery Operating Temp. / Humidity Storage Temp. / Humidity Vibration Mechanical Shock Electrostatic Discharge Radiated, Radio-Frequency EM Field Fast Transient Burst Lightning Surge RF Conducted Immunity Magnetic Field Immunity Voltage Dip / Regulation Harmonic Current Regulation Cooling System Output Grounding Output Hold-up Time Reliability Grade MTBF Weight Warranty - 24 VAC (85* VAC) Worldwide range, *Refer to Fig. 5 / 6Hz 47-63Hz 82% typ. ( VAC), 85% typ. (24 VAC) *Characteristic data: Fig.5 96% min. ( VAC), 9% min. (24 VAC) 3A peak ( VAC), 75A peak (24 VAC) *Characteristic data: Fig.6 3.8A typ.( VAC),.6A typ. (24 VAC) 8A 8A 9A.5A.A 6A 6A 25A.5A.5A 9W max. 3W 6W 7.5W 3W max. 35W max. 2A 2A 3A.5A 2.A 2W max. 36W 6W W A A 39W max. 4W max. A ±5 max. ±5 max. ±5 max. ±5 max. ±5 max. 5 max. 5 max. 2 max. 2 max. 5 max. max. max. 7 max. 7 max. max. Reclosing AC input, or switching PS_ON# signal from H to L - - to 6 C* / to 9% -2 to 7 C / to 95% Acceleration amplitude: 2g (-55Hz) Sweep cycles:, Test duration: 45 minutes each axis Lift one bottom edge up to 5mm and let it fall. Number of bumps: 3 each of 4 edges AC input - FG/DC output: 5 VAC for minute AC input - FG/DC output: 5MΩ min..ma max. ( VAC) / 2.mA max. (2 VAC) / 2.4mA max. (24 VAC) *Characteristic data: Fig.7 ±2V (pulse width: /ns, repetitive cycle: 3-Hz, normal/common mode with pos./neg. polarity for minutes each) EN6-4-2 compliant EN6-4-3 compliant EN6-4-4 compliant EN6-4-5 compliant EN6-4-6 compliant EN6-4-8 compliant EN6-4- compliant VCCI-B, FCC-B, CISPR22-B, EN5522-B compliant *Characteristic data: Fig.8 and 9 IEC6-3-2 (Ver 2.) Class D compliant UL695, CSA695 (c-ul) approved CE Marking (LVD,EMC) Forced air cooling: thermal-sensing variable speed fan embedded Connected chassis (FG) PWR_OK holds up 6ms min. after AC failure *Characteristic data: Fig.4 FA (industrial equipment grade, double-sided through hole PCB) 8,H min..kg typ. 3 years after delivery. If any faults belong to us, the defective unit shall be repaired or replaced at our cost. Max. output power: 35W 2 min. 2 min. 3 min. Short protection All other outputs are at rated loads and All outputs except for shutdown Hold down current limiting All outputs shutdown Reclosing AC input, or switching PS_ON# signal from H to L Automatic recovery 3.76~ ~7. 3.4~5.6 - (7.) All outputs except for shutdown - Zener clamp A A At rated input/output, 8PLUS BRONZE approved At rated input/output Input reclosing interval shall be sec min. At rated input/outputat cold start (25 C). Reference value during the measurement of input/output characteristics Peak output power: 4W Time: 5 sec or less Duty ratio of repetitive load: % or less *Refer to Fig.2 Total accuracy of temperature, input, and load fluctuations *Refer to Fig.4 Measured on a test board connected with a 47μF electrolytic capacitor and.μf ceramic capacitor by MHz oscilloscope. The test board shall be away from load wire and within 5mm from output terminals. input voltage. All outputs shutdown when is shorted (Automatic recovery) Reclosing AC input ( sec min. interval) Reclosing AC input ( sec min. interval) No condensation *Refer to Fig.3 No condensation JIS-C , at no operation JIS-C , at no operation Cut-off current: ma At 5 VDC IEC695 compliant Measured by INS-4 No fluctuation of DC output or malfunction Measured by single unit At rated input/output Fan speed changes by temperature and load. At 2W output Follow our standard Based on EIAJ RCR-92 Except for errors caused by operation not listed Rack Mount Non-backup Fig. Derating for Low Input Voltage Fig.2 Duty Ratio Fig.3 Temperature Derating Fig.4 Min. Load Condition When the input voltage is 9 VAC or less, follow the derating curve to derate rated current/power, max. current/power, and peak current/power. Load factor (%) Input voltage (V) Peak current/power shall be 5 sec or less continuously. For repetitive loads, duty ratio shall be % or less. t 5 sec t / T. t T When the ambient temperature (near the airflow inlet) exceeds 4 C, follow the derating curve to derate rated current/power, max. current/power, and peak current/power. Load factor (%) Ambient temperature ( C) The accuracy of output voltage is defined by the range shown in the Min. Load Condition below.,, Total output power (W) output current (A) Specification, design, and prices in the catalog are subject to change without prior notice. Do not copy. Copyright 23 Nipron Co., Ltd. 3 HPCU-4P-X2S
3 Signal Input / Output Specification Condition: at normal temperature and humidity unless otherwise specified Items Specification Note Input Signal Output Signal Output ON / OFF Control Signal (PS_ON#) SENSE FAN Control Signal (FAN_C),,, and outputs are delivered with 'L' input.,,, and outputs shutdown with 'H' or 'OPEN' input. The input terminal to detect the voltage of output; by connecting to the load terminal, only the line drop of the + side of the output cable is compensated. The control terminal of fan motor; the fan motor is forcibly rotated at full speed at 'L' input. The pin 22 of connector The pin 2 of connector and The pin 8 of SIG connector The pin 4 of SIG connector Normal Output Signal (PWR_OK) Fan Monitor Signal (FAN M) 'H' signal is delivered when the output is normal Two cycle pulses per one rotation of the fan motor are delivered (open collector output). The pin 2 of connector The pin 5 of SIG connector Duty ratio of the pulse shall be.5 typ. (Interval between the signals becomes longer at low speed and shorter at high speed.) The signal remains 'L' or 'OPEN' when the fan stops caused by any failure or malfunction. One rotation Signal Circuit Rack Mount Non-backup Input Signal Circuit Inside (PS_ON#) (PWR_OK) (FAN_M) 4.7kΩ V Outside Iin I Iin ma Q At Q on I.6mA V.8V Output Signal Circuit Inside Q kω V Iin Outside At Q on Iin ma V.4V Inside Q V Iin Outside 4.7kΩ (kω min.) At Q on Iin 5mA V.8V 3 HPCU-4P-X2S Specification, design, and prices in the catalog are subject to change without prior notice. Do not copy. Copyright 23 Nipron Co., Ltd.
4 Sequence Diagram AC input voltage (at rated output) (*) ON AC operation Instantaneous blackout () (3) OFF - 5ms PS_ON H L (2) H PWR_OK (*2) L Block Diagram - 5ms ms max. Undefined 6ms min.(*3) (*) All other outputs except for CH2() shall follow this timing and the rising time difference from CH2() shall be 5ms or less. In addition, output voltage level of CH3() at rising shall be more than the voltage level of CH(). The difference of output voltage level of CH2() and CH() should be between -.6V and +2.25V. Each output voltage at the time of trailing rank or level differences are unregulated. (*2) A rise and a fall time of PWR_OK signal shall be less than μs at the time of the capacitive load is not connected to signal output. (*3) At 2W output () With PS_ON# H, only output starts up at AC input. (2) All outputs start up at PS_ON# 'L' input. Also, PWR_OK goes to 'H' at - 5ms after the output has risen. (3) PWR_OK turns to 'L' after 6ms or longer from blackout. ms later than this event, the output shuts down. Inverter Rectifying /smoothing ms min. Rack Mount Non-backup Controller Error amplifier Dropper supply SW AC L VAC AC N FG Noise filter Rectifying circuit PFC Inverter Synchronous rectifying /smoothing Chopper Temperature detection Chopper Overheat circuit Controller Controller Error amplifier :Output PCB unit GND Connect to chassis OVP Sequence circuit REMOTE ON/OFF Sequence circuit PS_ON# (Remote ON/OFF) PWR OK ( Good) Controller FAN_M FAN_C FAN Specification, design, and prices in the catalog are subject to change without prior notice. Do not copy. Copyright 23 Nipron Co., Ltd. HPCU-4P-X2S 32
5 Outline Drawing Rack Mount Non-backup Optional Components Sold Separately Detachable Output Harness Model Length and Type of Connector Output Port Allocation Main power cable WH-M222-5 WH-M222-3 WH-V48-5 WH-VG28-5 5± 3± 5±5 WH-M V power cable 2V 5±5 WH-V88-5 WH-VV WH-VG power cable 2V 2V 2V 2V 2V 5±5 5±5 5± 5± 2-pin 2-pin 24-pin 2V 8-pin 2V 4-pin 2V 4-pin PCI-E 6-pin 2V 8-pin 2V 8-pin 2V 8-pin PCI-E 6-pin Acceptable cable(s) Installation direction The unit can be installed in any directions. 2V SIG 2V SIG model model model model WH-PP ±5 5±5 5±5 peripheral () WH-PS ±5 5±5 5±5 FD WH-PS ±5 5±5 5±5 S-ATA 85±5 SIG cable SIG WH-S6-5 WH-S6-5- WH-S3-5 SIG SIG SIG 5±5 5±5 5±5 SIG- SIG-2 SIG-3 33 HPCU-4P-X2S Specification, design, and prices in the catalog are subject to change without prior notice. Do not copy. Copyright 23 Nipron Co., Ltd.
6 Optional Components Sold Separately Cable Picture Model Type Description WH2753 AC power cord 25 VAC 2A [PSE] WH AC power cord 25 VAC 2A (tracking resistance type) [PSE] Other Optional Components Model ACC2637 WH282 WH2747 WH WH282 Description Automatic startup unit 2-pin extension harness (6mm) 2-pin extension harness (45mm) 2-pin extension harness (2mm) PCI-E 6-pin connector conversion harness Model WH55 WH55-2 WH555 ACC546 ACC577 WH573 Description 2V 4-pin connector conversion harness (8mm) 2V 4-pin connector conversion harness (32mm) AT connector conversion harness Harness with PS_ON switch PS_ON terminal short connector PS_ON terminal short 2-pin harness Rack Mount Non-backup Specification, design, and prices in the catalog are subject to change without prior notice. Do not copy. Copyright 23 Nipron Co., Ltd. HPCU-4P-X2S 34
7 Characteristics Data (Reference only) * Specification is subject to change due to proposed product Fig.5 Efficiency / Input Current vs. Output Fig.6 Inrush Current Rack Mount Non-backup Efficiency [%] Level [db(μv)] 備考 4 : Frequency [MHz] [db(μv)] Output power [W] Fig.7 Leakage Current Input: / 2 / 24 VAC and min. load Measurement conditions: IEC695 compliant Rated load VAC.7mA.7mA 2 VAC.34mA.35mA 24 VAC.4mA.4mA * Contact us if a lower leakage current model is required. Fig.9 Conducted Emission at 23 VAC VAC 24 VAC Min. load Input: 23 VAC Mode: Peak VCCI Class B Measuring point: N-FG Fig.8 Conducted Emission at VAC Level Level [db(μv)] Frequency [MHz] [db(μv)] Frequency [MHz] Fig. Rising Characteristics at VAC Inrush current: 22.A (at VAC) Inrush current: 5.A (at 24 VAC) Input: VAC Mode: Peak VCCI Class B Measuring point: N-FG Measuring point: L-FG Input: VAC Time axis: 2ms/DIV Level Frequency [MHz] Measuring point: L-FG Fig. Falling Characteristics at VAC when REMOTE goes Off Fig.2 Rising Characteristics at 24 VAC Input: VAC Time axis: 5ms/DIV Input: 24 VAC Time axis: 2ms/DIV VAC PS_ON# PWR_OK 35 HPCU-4P-X2S Specification, design, and prices in the catalog are subject to change without prior notice. Do not copy. Copyright 23 Nipron Co., Ltd.
8 Characteristics Data (Reference only) * Specification is subject to change due to proposed product Fig.3 Falling Characteristics at 24 VAC when REMOTE goes Off 24 VAC PS_ON# PWR_OK Fig.5 Output Voltage Regulation AC input voltage output (min. load) output (rated load) output (min. load) output (rated load) output (min. load) output (rated load) Output Input: 24 VAC Time axis: 5ms/DIV Min. load Rated load output A 9A output A 8A output A 8A VAC 5 VAC 24 VAC 2.55 V 2.54 V 2.55 V 2. V 2. V 2. V 5. V 5.3 V 5.5 V 4.96 V 4.96 V 4.96 V 3.38 V 3.38 V 3.39 V V V V Fig.4 Output Hold-up Time vs. Output Hold-up time [ms] Output voltage [V] PWR_OK: the point that PWR_OK signal goes to L Output voltage: the point any output voltage decreases to 95% except Output power [W] Output current [A] PWR_OK Output voltage Fig.6 Over Current Protection (V-I Characteristic) Input: VAC Rack Mount Non-backup Specification, design, and prices in the catalog are subject to change without prior notice. Do not copy. Copyright 23 Nipron Co., Ltd. HPCU-4P-X2S 36
1. Series name 2. Output power 3. Peak output compliant. 4. EPS output V output equipped 6. Standard
R ack Mount PC1U-4P-E2S Ultra-High Ultra-high Efficiency EPS1U PC RoHS Directive Rack Mount Non-backup Model PC1U-4P-E2S Model Name Coding PC1U-4P-E2S PC1U - 4 P - E 2 S 1 2 3 4 5 6 Description - 1. Series
More information4. ATX output V output equipped 6. Standard. Safety standard / Approval UL CSA EN CE CCC Reliability Grade HFA FA HOA OA. Function.
R ack Mount PC1U16P Series CostOriented 1U Size PC RoHS Directive Model PC1U16PX2S PC1U16PX2S2 Model Name Coding PC1U16PX2S PC1U 16 P X 2 S 1 2 3 4 5 6 7 Description With output harness 1. Series name
More informationIoT compatible model will be in the lineup.
Industrial grade ATX power supply HPCSA-700P series 85 150 150 A new ATX power supply HPCSA-700P is now available. HPCSA-700P is a large capacity, high efficiency ATX power supply unit with the maximum
More information4. ATX output V output 6. S: No 12V 4-pin connector V: With 12 4-pin connector
D esktop PC PCSA3P Series Silent Computer with Great Achievements Desktop PC Nonbackup power supply PCSA3PX2S ATX Continuous Max. RoHS Directive Peak 2W 3W Model PCSA3PX2S PCSA3PX2V Model Name Coding PCSA
More information80PLUS & ErP Directive Compliant. Low Power Consumption and High Efficiency Nonstop Power Supply Avaiable! at 100 VAC 0.55W
D esktop PC NSP9-52P-S2 Series Desktop PC Nonstop (Uninterruptible / No -interruption) 8PUS & ErP Directive Compliant. ow Consumption and igh Efficiency Nonstop Avaiable! Model NSP9-52P-S2-V NSP9-52P-S2-2V
More informationSafety standard / Approval UL CSA EN CE CCC Reliability Grade HFA FA HOA OA. Function. DC start RS 232C. Output Output voltage
D esktop PC ansp325p Series ow Cost Nonstop with Specialized Functions Desktop PC Nonstop (Uninterruptible / No interruption) ansp325ps2 ansp325ps2 Name Coding ansp3 25 P S 2 2 3 4 5 6 ansp325ps2 Description
More information0A Min. Load Current for All Outputs, High Power Nonstop Power Supply
D esktop PC enspp Series A Min. oad Current for All Outputs, igh Nonstop Desktop PC Nonstop (Uninterruptible / No interruption) Model ensppsv ensppsv ensppsv ensppsv ensppcv ensppcv ensppcv Model Name
More informationVoltage Current Front-mounting bracket
Switching Power Supply S8PS Compact DIN-Rail Mounting Industrial Power Supplies with Capacities Up to 600 W Models range from 0 W to 600 W. Universal input: voltage range 0 to 240 VAC. Power Factor Correction
More informationATX-3000 Product Specification Enhance Electronics Co.,LTD
This specification defines ATX multiple output switching power supply.. The parameters of this supply are defined in this specification for Family using. This specification defines max continuous output
More informationLFWLP350 SERIES 350 Watt Open Frame Power Supply Measures: 5.00 x 3.00 x 1.00
Features 5 x 3 x 1 Inches Form factor 350 Watts with Forced Air Cooling & 200 Watts Convection Cooling Efficiencies upto 94% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down
More informationConstant Voltage Mode
FEATURES: AC Input 1~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP Flicker Free High Operating Ambient Temp.: -3 ~+6 Surge protection: L-N 4KV, L-FG/N-FG 8KV Safety: UL 875 / PSE EMI:
More informationPRODUCT SPECIFICATION File: EA-A0601HE-12 Model: SSA-0601HE-12 Date: Apr. 17, 2015
SWITCHING POWER SUPPLY Rev.: A0(+12V/5A) Page: 1 of 5 1.0 Introductions: 2 2.0 AC Input Characteristics: 2 2.1 Input Voltage Rating:. 2 2.2 Input Voltage Range: 2 2.3 Input Frequency: 2 2.4 AC Inrush current:
More informationTable of Contents. 1 General 1.1 Scope
Table of Contents 1 General 1.1 Scope 2 Input Characteristics 2.1 Input Voltage 2.2 Input Frequency 2.3 Max. Input AC Current 2.4 Inrush Current 2.5 Efficiency 3 Output characteristics 3.1 Nominal Operation
More informationElectrical Specifications VAC/390 VDC, Universal (Derate from 100% at 100V AC to 90% at 90V AC)
WLP350 Industrial Features 5 x 3 x 1 Inches Form factor 350 Watts with Forced Air Cooling & 200 Watts Convection Cooling Efficiencies upto 94% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output,
More informationElectrical Specifications VAC/390 VDC, Universal (Derate from 100% at 100V AC to 77% at 80V AC)
180 Watt Industrial Features 4 x 2 x 0.75 Inches Form factor 180 Watts with Forced Air Cooling Efficiencies upto 92% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down feature
More informationCVN300-96P01A SERIES. Five Output. Special Features
CVN300-96P01A SERIES Embedded Power for Business-Critical Continuity CVN300-96P01A SERIES 1 of 8 Total Power: W Input Voltage: VDC # of Outputs: 5 Special Features Server Systems Infrastructure (SSI) entry-level
More informationLFWLP225 SERIES 225 Watt Open Frame Power Supply Measures: 4.00 x 2.00 x 1.00
Features 4 x 2 x 1 Inches Form factor 225 Watts with Forced Air Cooling Efficiencies upto 94% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down feature 3.37m Hours, Telcordia
More informationPRODUCT SPECIFICATION
Part Name: 91.50012.H01 Model No: HPC-500-H12S Document Version: A0 PRODUCT SPECIFICATION Release Date: 2010/6/30 Approved by : Checked by : Prepared by : HIGH POWER ELECTRONIC CO., LTD SIRFA International
More informationTFX PC Power Specifications
TFX PC Power Specifications Model: HK340-71FP Consumer:Huntkey File NO: 试 产 Prepared by: Rex Checked by: Zhi Wu Approved by: Zhi Wu Issue date: 2010-03-29 REV:02 Model:HK340-71FP P/N:P15-3407100R Page
More information300 WATT, PFC, OPEN FRAME POWER SUPPLIES TABLE 1. OUTPUT RATINGS AND SPECIFICATIONS, RMW 300W SERIES
INSTRUCTION MANUAL KEPCO An ISO 9001 Company. 300 WATT, PFC, OPEN FRAME POWER SUPPLIES RMW 300W SERIES I INTRODUCTION SCOPE OF MANUAL. This instruction manual covers the installation and operation of the
More informationSafety Standards. Model Number: Unit Weight:
MEA-250A24C Highlights & Features Meet Efficiency Level VI Safety Approvals to IEC 60601-1 3.1 Ed. & IEC 60950-1 Compliant with IEC 60601-1-2 3 th and 4 th Ed. Requirements IP22 ingress protection rating
More information350W. ATX/Baby AT NSP(nonstop power supply) B-C72 NSP2-375-D4S. Desktop PC Power Supply NSP2-375-D4S
UPDATE DUALINPUT PC DCC TECHNICAL A. H D. Control & Mechanism System Power Supply LIMBS Desktop PC Power Supply NSP23754S Nonstop power supply with DC startup! Completely safe and uninterruptible operation
More informationPRODUCT SPECIFICATION File:SSA Model : SSA Rev:A2 Date: Nov. 29, 2010
Page: 1 of 4 1.0 Introductions: 2 2.0 Input Characteristics: 2 2.1 Input Voltage Rating:. 2 2.2 Input Voltage Range: 2 2.3 Input Frequency: 2 2.4 Inrush current: 2 2.5 Input current: 2 2.6 Leakage current:
More informationElectrical Specifications VAC/390 VDC, Universal (Derate from 100% at 100V AC to 77% at 80V AC)
180 Watt Medical Features 4 x 2 x 0.75 Inches Form factor 180 Watts with Forced Air Cooling Approval to EN60601 3rd Edition Efficiencies upto 92% -40 to 70 degree operating temperature* Dual fusing 12V
More informationElectrical Specifications VAC/390 VDC, Universal (Derate from 100% at 100V AC to 95% at 85V AC)
225 Watt Industrial Features 4 x 2 x 1 Inches Form factor 225 Watts with Forced Air Cooling Efficiencies upto 94% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down feature
More informationKEPCO GIVES YOU ZERO-UP PROGRAMMABILITY IN AN AFFORDABLE POWER MODULE
146-1915 More than switch mode boxes with wide-range a-c/d-c input power factor correction and current-share capacity... KEPCO GIVES YOU ZERO-UP PROGRAMMABILITY IN AN AFFORDABLE POWER MODULE RKW 300W 92
More informationCPS Industrial Power Supply
CPS Industrial Power Supply Power Supply Specification Model Number: FSAK C Series Industrial quality, 1U high, multiple output power supply AC Input: full range, active PFC. DC Output: 6 configurable,
More informationPOWERSOLVE ELECTRONICS LTD PSL400-XX series Conduction Cooled Power Supply Engineering Specification
POWERSOLVE ELECTRONICS LTD PSL400-XX series Conduction Cooled Power Supply Engineering Specification 1. Scope 2. Electrical Specification 2.1. AC Input Requirements 2.1.1. Input Voltage 2.1.2. Input Frequency
More informationMPM-U653-DCF-B M/N: MPM-U653-DCF-B. 650W Medical AC / DC SPECIFICATION FOR SWITCHING POWER SUPPLY. Revision History
SPECIFICATION FOR SWITCHING POWER SUPPLY M/N: Revision History Version Date Change Items Rev. 1.0 July.21. 2017 Established. Page 1 Models & Ratings FEATURES 650W medical power supply with force air cooling.
More informationRipple & Noise (max) (See Note 2) 5V output: 100mVp-p; 12V - 27V outputs: 150mVp-p; 48V output: 200mVp-p
FEATURES 3 Year Warranty 100% Full Load Burn-In Tested Universal AC Input / Full Range Built-In Remote Sense Function Built-In Remote ON/OFF Control Current Sharing up to 2000W (3+1) Forced Air Cooling
More informationLFMWLP225 SERIES 225 Watt Open Frame Power Supply Measures: 4.00 x 2.00 x 1.00
Features 4 x 2 x 1 Inches Form factor 225 Watts with Forced Air Cooling Approval to EN60601 3 rd Edition Efficiencies upto 94% -40 to 70 degree operating temperature* Dual fusing 12V / 0.5A Fan Output,
More information400AUS24 B MDS AUS. MDS Medical AC-DC Open Frame 24Volt, 400Watt / MDS-400AUS24 B. General Description. Model Information. Model Numbering ```
400AUS24 B Highlights & Features Safety Approvals to IEC 60601-1 3.1rd ed. & IEC 60950-1 Compliant with IEC 60601-1-2 4th Ed. Requirements Low touch current (
More informationFeatures. Regulated Converter. RAC35-G/OF 35 Watt 4 x 2 Open Frame RAC35- SG/OF. AC/DC Converter
Features Regulated Converter Description Universal input -264VAC Efficiency up to 86% Short circuit and over voltage/current protected UL/EN9 certified, CE marked Conformal coated product The RAC35-xxG/OF
More informationOutput Voltage* (nom.)(adjustable)
Industrial Power Supplies TBLC Series, 6 90 W Low profile case, module depth only 55 mm Suitable for mounting in domestic installation panels Very high efficiency and low standby power -> compliance to
More informationUniversal Power Supplies
, Features Universal input: 90 264 VAC or 120 30 VDC Active power factor correction (>0.95) High efficiency up to 93% Load share function for up to 3 units in parallel Adjustable output voltage EMI/EMC
More informationCINT W Triple Output Industrial Series
CINT3 W Triple Output Features 2 x 4 x.3 Package Suitable for U Applications W w/air, 8W convection cooled Universal Input 9-264Vac Efficiency 87% typical Approved to CSA/EN/IEC/UL695-, 2 nd Edition Power
More informationSafety Standards. Model Number:
150AAS12 F/B Highlights & Features Meet DOE Level VI and ErP Lot 7 Safety Approvals to IEC 60601-1 3.1rd ed. & IEC 60950-1 Compliant with IEC 60601-1-2 4th Ed. Requirements Low touch current (
More informationHEC-100RTN-48QSCA Rev A1.0
HEC100RTN48QSCA Rev A1.0 A. Features High Efficiency (Up to 90%). Active Power Factor Correction (Typical 0.96). Isolation Class I (With FG) AllRound Protection: OVP/SCP/OTP/OPP. Fully isolated Metal case
More informationPMT. Safety Standards. Model Number:
PMT Highlights & Features AC input range selectable by switch Full aluminium casing for light weight and corrosion resistant handling Built-in automatic fan speed control circuit MTBF > 700,000 hrs. as
More informationSST-NJ450-SXL. Nightjar Series. The definitive small form factor fanless power supply
Nightjar Series SST-NJ450-SXL The definitive small form factor fanless power supply Fan-less thermal solution, 0 dba acoustics SFX-L form factor for use in small form factor computers High efficiency with
More informationSeries AMES40-MAZ 40 Watt AC-DC / DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model (VAC/Hz) (VDC) Output Voltage (V) Output Current max (A) Efficiency (%) AMES40-3.3SMAZ 90-264/47-440 130-370 3.3
More informationSafety Standards. Model Number:
060AAS19 B Highlights & Features Meet Efficiency Level VI Safety Approvals to IEC 60601-1 3.1rd ed. & IEC 60950-1 Compliant with IEC 60601-1-2 4th Ed. Requirements Low touch current (
More informationSafety Standards. Model Number:
090AAS15 F/B Highlights & Features Meet Efficiency Level VI Safety Approvals to IEC 60601-1 3.1rd ed. & IEC 60950-1 Compliant with IEC 60601-1-2 4th Ed. Requirements Low touch current (
More informationC1U-W Tx Series
www.murata-ps.com PRODUCT OVERVIEW The C1U-W-1200 is a 1200 Watt universal AC input, power-factor-corrected (PFC) front-end power supply for general applications. The main output is 12V with a standby
More informationSPECIFICATION. Model: PS3038. Redundant Power Supply With Active PFC 700W + 700W
SPECIFICATION Model: PS3038 Redundant Power Supply With Active PFC 700W + 700W Toll Free: 1-888-865-6888 Tel: 510-226-8368 Fax: 510-226-8968 Email: sales@rackmountmart.com TABLE OF CONTENTS 1. General.......
More informationSPECIFICATION. Model: OP650 Switching Power Supply With Active PFC PS/2 650W
SPECIFICATION Model: OP650 Switching Power Supply With Active PFC PS/2 650W 1. General This is the specification of Model OP650; it is intended to describe the functions and performance of the subject
More informationSafety Standards. Model Number:
080AAS12 A Highlights & Features Safety Approvals to IEC 60601-1 3.1rd ed. & IEC 60950-1 Compliant with IEC 60601-1-2 4th Ed. Requirements Low touch current (
More information12-15VDC (12V±5%) 24-28VDC (24V±5%)
Features Description Universal AC input (85-264VAC) Long 7 year warranty Protections: SCP, OVP, OCP, OTP 1% full load burn-in test DC OK indicator LED with relay contacts cooling by free air convection,
More informationSafety Standards. Model Number:
060AAS15 B Highlights & Features Meet Efficiency Level VI Safety Approvals to IEC 60601-1 3.1rd ed. & IEC 60950-1 Compliant with IEC 60601-1-2 4th Ed. Requirements Low touch current (
More informationTop Microsystems Proprietary Specification P/N: P6301H N1F SK SPECIFICATION P/N: P6301H N1F
SPECIFICATION P/N: P6301H N1F Industrial Quality 1U Mini 300W ATX Power Supply (81.5x150x40.3 mm) Active PFC 100V-264V AC Input *** Specification Approval *** This specification (total 10 pages including
More informationSafety Standards. Model Number:
040APS15 B Highlights & Features Safety Approvals to IEC 60601-1 3.1rd ed. & IEC 60950-1 Compliant with IEC 60601-1-2 4th Ed. Requirements Low touch current (
More information400AUS24 B MDS AUS. MDS Medical AC-DC Open Frame 24Volt, 400Watt / MDS-400AUS24 B. General Description. Model Information. Model Numbering ```
400AUS24 B Highlights & Features Safety Approvals to IEC 60601-1 3rd ed. & IEC 60950-1 Risk management report available Low touch current (
More informationSPECIFICATION. SFX Form Factor. SST-ST45SF 450W Switching Power Supply Active PFC Circuit Full Range Input. SFX Form Factor
SPECIFICATION SFX Form Factor SST-ST45SF 450W Switching Power Supply Active PFC Circuit Full Range Input.GENERAL DESCRIPTION AND SCOPE This is the specification of Model SST-ST45SF; AC-line powered switching
More informationCLP0224 SERIES 200 Watt Open Frame Power Supply Measures: 4.00 x 2.00 x 1.40
CLP0224 Open Frame Power Supply Applications Industrial equipment Telecommunications equipment Features Compact size 50.8 mm x 101.6 mm x 35.6 mm (2 in x 4 in x 1.4 in) with density of 18 W/in 3 Universal
More information275 Watt Medical Ultra low profile
127 x 76 x 19 mm Form factor 275 Watts with Forced Air Cooling Approval to EN60601 3rd Edition Efficiencies upto 92% -40 to 70 degree operating temperature* Dual fusing Electrical Specifications 12V /
More information12-15VDC (12V±5%) 24-28VDC (24V±5%)
Features DIN Rail Description Universal AC input (85-264VAC) Long 7 year warranty Protections: SCP, OVP, OCP, OTP 1% full load burn-in test DC OK indicator LED with relay contacts cooling by free air convection,
More information750W Power Supply with Single Output. RSP-750 series. File Name:RSP-750-SPEC
750W Power Supply with Single Output File Name:RSP-750-SPEC 06-0-7 750W Power Supply with Single Output SPECIFICATION MODEL OUTPUT INPUT PROTECTION FUNCTION ENVIRONMENT SAFETY & EMC (Note 4) OTHERS NOTE
More informationIS -680PD8. Switching Power Supply 680W) SPECIFICATION. Revision: 1.0
IS-680PD8 IS -680PD8 Switching Power Supply ( EPS- 680W) SPECIFICATION Revision: 1.0 727,. Phillips Drive City of Industry. CA 91748. USA http:// www.xeal.com.tw TEL: 626-3038885 FAX: 626-3010588 TABLE
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. PAGE :sheet 1 of 9 Item No. page 0 General 1 Input Requirements 2 2 Output
More informationSafety Standards. Model Number:
065APS12 B Highlights & Features Safety Approvals to IEC 60601-1 3.1rd ed. & IEC 60950-1 Compliant with IEC 60601-1-2 4th Ed. Requirements Low touch current (
More informationSeries AMEL5-MAZ 5 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: I/O Isolation 4000 Operating Temp: -40 C to +80 C or -25 C to +80 C Input: 90-264, 47-440Hz, or 130-370VDC Over load, Over, Short Circuit Protection
More informationORDERING INFORMATION SEE PAGE 6
400W High Density Medical/Industrial Grade Open Frame Power Supplies Medical Safety Approval 60601-1 3rd Edition 2 MOPP Class 2 for home use medical applications (BSM400) Single output with 5V Auxiliary
More informationNote1: Typ. efficiency is 230VAC and full load 12VDC 24VDC 48VDC ms 8ms 16ms 80ms
Features Regulated Converters Universal Input 9-264V Efficiency Up To 86% Short Circuit And Over Voltage/Current Protected UL/EN695 Certified, CE Marked Conformal Coated Product RECOM Connector Set Available
More informationSafety Standards. Model Number:
060BAS12 A Highlights & Features Meet Efficiency Level VI Safety Approvals to IEC 60601-1 3rd ed. & IEC 60950-1 Compliant with IEC 60601-1-2 4th Ed. Requirements Low touch current (
More informationSafety Standards. Model Number:
040APS Highlights & Features Compliant to IEC 60601-1 3rd edition IT and medical safety approvals Low earth leakage Current (
More information5 x 8.5 x 1.61 Inch Form Factor. Convection Cooling Rated. Approved to EN Dual Fusing. Current Sharing. Open Frame. Peak Power Capability
The MCC600 Series of open-frame medical power supplies, with its wide universal 85-264 VAC input range, is available at 600 W of output power and a variety of single output voltages. The MCC series is
More informationPMC. Model Number: Model Number Input Voltage Range Output Voltage Output Current PMC-24V600W1BA Vac ( Vdc) 24Vdc 25.
PMC Highlights & Features Universal AC input range High PF > 0.99 @ 115Vac Power Boost of 200% for 5 seconds Meet Surge Immunity IEC 61000-4-5, Level 4 (CM: 4kV, DM: 2kV) Built-in fan speed control and
More informationOutput Voltage in Constant Voltage Mode. Model Number
Supplies LDB75 Supply Constant Voltage /Current LDB Series FEATURES Universal Input: 90-305VAC Constant Voltage/Current High Efficiency 91% Class II IP67 rated Class 2 device (UL1310) Power Factor: Typical
More informationFunctional configuration Rated input voltage Power ratings Output voltage Output current Part number Non-PFC
Switching Power Supply DIN-Rail Mount Power Supply With Capacity Up to 240 W for General or Industrial Applications Wide power range: 15 to 240 W 15 W and PFC Models with Universal voltage of 100 to 230
More information060AAS19 B MDS. MDS Medical AC-DC Adapter 19Volt, 60Watt / MDS-060AAS19 B. Highlights & Features. Safety Standards. Model Number: General Description
060AAS19 B Highlights & Features Safety Approvals to IEC 60601-1 3rd ed. & IEC 60950-1 Risk management report available Low touch current (
More informationSeries AMEL20-AZ 20 Watt AC-DC / DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model Input Voltage (/Hz) Input Voltage (VDC) Max wattage (W) Voltage (V) Current max (A) Maximum capacitive load (µf)
More informationPJ Open Frame Power Supply 24V 50W 1 Phase / PJ-24V50W NA
PJ Highlights & Features Universal AC input voltage range (85Vac 264Vac) Low Inrush Current / Low Leakage Current High efficiency and PF factor to conserve energy Conforms to harmonic current IEC/EN 61000-3-2,
More informationENGINEERING SPECIFICATION SHEET SPEC. Revision History
SPEC. Revision History Revision Change Information Date No. Description Current version 2010/08/01 1 New revision Initial 2011-1-25 2 Fuse is changed T4.0A 2.0 2011-4-1 3 Add AC adapter external dimension
More informationPMT. Model Number: Model Number Input Voltage Range Output Voltage Output Current PMT-5V350W1A (Selectable by Switch)
PMT Highlights & Features AC input range selectable by switch Full Aluminium casing for light weight and corrosion resistant handling Built-in automatic fan speed control circuit Wide operating temperature
More informationElectrical Specifications. Input Current 115 VAC: 1 A max. 230 VAC: 0.5 A max.
MLP75 Medical Features 3 x 2 x 1 Inches Form factor 75 Watts Convection Approval to EN60601 3 rd Edition Efficiencies upto 93% -40 to 70 degree operating temperature Dual fusing Thermal Shut-Down feature
More informationOutput Voltage* (nom.)(adjustable)
Industrial Power Supplies TBLC Series, 6 90 W Low profile case, module depth only 59,5mm Suitable for mounting in domestic installation panels Low output ripples and spikes Fully compliance to ECO-Standard
More informationMVAD040 Series 40W 2" x 4" AC-DC Power Supply Converter
www.murata-ps.com MVAD040 Series DESCRIPTION The MVAD040 series switching power supplies utilize advanced component and circuit technologies to deliver high effi ciency. Designed for Medical, Telecom,
More informationENGINEERING SPECIFICATION SHEET. Table of Contents 1 SCOPE ELECTRICAL SPECIFICATION...5
Table of Contents 1 SCOPE...5 2 ELECTRICAL SPECIFICATION...5 2.1 INPUT REQUIREMENT... 5 2.1.1 Input voltage range... 5 2.1.2 Input frequency range... 5 2.1.3 AC inrush current... 5 2.1.4 Input current...
More informationSnaptec Australia Pty. Ltd.
KEY FEATURES Universal Input: 90-264 VAC With P.F.C. Function, PF>0.95 Remote ON/OFF Function Current Share Function Power Good Function High Efficiency up to 90~93% Protections: Over Load / Over Voltage
More informationIS-900R2UPD8G. Redundant Power Supply. Active PFC 900W + 900W. 80+ Gold Efficiency SPECIFICATION. Revision: 1.0
IS-900R2UPD8G IS-900R2UPD8G Redundant Power Supply Active PFC 900W + 900W 80+ Gold Efficiency SPECIFICATION Revision: 1.0 727,. Phillips Drive City of Industry. CA 91748. USA http:// www.xeal.com TEL:
More informationMax. Output Power(2) Typical Efficiency (3) 0 ~ 18.4 A 220 W 91.5% 0.96 EBV-250S012SV 0 ~ 10.5 A 250 W 93.0% 0.96 EBV-250S024SV
Features High Efficiency (up to 93.5%) Constant Voltage Output Input Surge Protection: 4kV lineline, 6kV lineearth AllAround Protection: OCP, OVP, SCP, OTP Waterproof (IP67) SELV Output Independent Design
More informationParameter Condition Min. Typ. Max. Internal Input Filter. nom. Vin = 230VDC 115VAC 230VAC 115VAC 230VAC. No load Power Consumption
Features Regulated Converter Universal input VAC 3W PCB mount package
More informationC1U-W Tx Series AC/DC Front End Power Supply
www.murata-ps.com PRODUCT OVERVIEW The C1U-W-1200 is a 1200 Watt universal AC input, power-factor-corrected (PFC) front-end power supply for general applications. The main output is 48V with a standby
More informationSpecification For 90 Watts Adapter Power Supply Model No: ADB002 Customer ID: 000G Revision: 4.0
Specification For 90 Watts Adapter Power Supply Model No: ADB002 Customer ID: 000G Revision: 4.0 Prepared By: Terry Liou Approved By: Jacky Chi PAGE 1 E. C. List 1.0 Original 2.0 Modify 8.3 Weight 3.0
More informationIEC/EN/UL60950 & CE certified, EN55032 Class B
Features Regulated Converter Universal input VAC 4W PCB mount package
More information7.5 Watt AC-DC Switch Power Supply
MAIN FEATURES: 7.5W Small Compact Size - PCB Mount Single Output - Regulated Output Range : 3.3VDC - 24VDC Input Range : 85VAC - 265VAC/47-63Hz Or 120VDC - 370VDC Very Low Standby Power Consumption < 0.15W
More informationSPECIFICATIONS: PSAK650
FEATURES RoHS Compliant Power OK Signal (Power Good, Logic low) Intelligent LED Indicators Remote On/Off and Remote Sense Function High Efficiency up to 91% Forced Current Sharing at Parallel Operation
More informationSafety Standards. Model Number:
100APS24 B Highlights & Features Safety Approvals to IEC 60601-1 3.1rd ed. & IEC 60950-1 Compliant with IEC 60601-1-2 4th Ed. Requirements Low touch current (
More informationPower Supply. Users Guide PRODUCT MANUAL. WESTELL.COM Westell Technologies MNL rd
PRODUCT MANUAL Power Supply Westell Technologies. 960-1152-MNL rd DISCLAIMER All information and statements contained herein are accurate to the best of Westell Technologies knowledge. Westell Technologies
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A H 450 U S 12 - F2 Application Package Dimension Output Input Output Output Protection
More informationSeries AMEL20-MAZ 20 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: I/O Isolation 4000 Energy Star compliant Operating Temp: -40 o C to +70 o C Ultra-small package Over load, Over, Short Circuit Protection Up
More informationTECHNICAL DATASHEET MDS Medical AC-DC Open Frame 065APS24 B Highlights & Features Safety Standards Model Number: Unit Weight Dimensions (W x L x H):
065APS24 B Highlights & Features Safety Approvals to IEC 60601-1 3rd ed. & IEC 60950-1 Risk management report available Low touch current (
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE T A H 450 U S 12 - F2 Application Package Dimension Output Input Output Output Protection
More informationApplication Package Dimension Output Input Output Output Protection Option Code Code Power Voltage Quantity Voltage Type (W) (VAC) (VDC)
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE T A H 450 U S 12 - F2 Application Package Dimension Output Input Output Output Protection
More informationENGINEERING SPECIFICATION. 40W AC Adaptor. Part Number: PA W1
Engineering Specification ENGINEERING SPECIFICATION 40W AC Adaptor Part Number: PA-1400-26W1 Approval By: A Anson Hsu 2013.04.29 SHEET 1 of 10 Revision History Engineering Specification REV.X01, 2012.07.24
More information040APS12 B MDS. MDS Medical AC-DC Open Frame 12Volt, 40Watt / MDS-040APS12 B ``` Highlights & Features. Safety Standards.
040APS12 B Highlights & Features Safety Approvals to IEC 60601-1 3rd ed. & IEC 60950-1 Risk management report available Low touch current (
More informationSPECIFICATION. SilverStone Element ST50EF-PLUS ATX12V 2.2 Switching Power Supply With Active PFC PS/2 500W. Table 1 AC Input Line Requirements.
ELEMENT ST50EFPLUS Power through efficiency Efficiency over 80% across all loading conditions (20% to 100%) Industryleading low noise operation Dual +12V rails for advanced systems Dual PCIE connectors
More informationSafety Standards. Model Number:
PMC Highlights & Features Universal AC input range from 85Vac to 264Vac without power de-rating High operating ambient temperature, > 60 o C de-rating power High MTBF > 700,000 hrs. as per Telcordia SR-332
More information100BPS15 B. MDS Medical AC-DC Open Frame 15Volt, 100Watt / MDS-100BPS15 B ``` Highlights & Features. Safety Standards.
TECHNICAL DATASHEET 100BPS15 B Highlights & Features rd rd Safety Approvals to IEC60601-1 3 & 3.1 and IEC60950-1 Compact size 2 x4 Class B EMI and 4th Edition Immunity Compliant Low touch current (
More informationSwitching Power Supply S8E1. Ordering Information. Compact and Economical Switching Power Supply
Switching Power Supply Compact and Economical Switching Power Supply Models range from 10 to 50 W Open-frame and covered types Wide range of output voltage: 5-, 12-, 15- and 24-V models UL, CSA approved
More information