LDS6525. Intel 4th Generation Core i7 Haswell Mobile-Class Processor. Optional BuiltSECURE DATASHEET

Transcription

1 DATASHEET EnsembleSeries TM LDS6525 6U OpenVPX SBC Powered by Intel 4th Gen i7 Processor Intel 4th Generation Quad-Core i7 processor (Haswell mobile class) Software defined Gen 2 serial RapidIO & 10 Gigabit Ethernet switch fabrics Integrated Gen 3 PCIe switching for on/off-board co-processing XMC and XMC/PMC mezzanine sites Optional built-in, BuiltSECURE System Security Engineering (SSE) The EnsembleSeries LDS6525 is a 6U OpenVPX SBC featuring a 4th Generation Intel Quad-corei7 processor (Haswell mobile class), firmware-upgradable FPGA implemented switched fabrics and configurable mezzanine I/O. The LDS6525 SBC provides a next-generation architecture that blends the computational capabilities of the AVX2-enabled Core i7 processor with Gen 2 serial RapidIO or 10 Gigabit Ethernet data paths. This combination provides a powerful and scalable computing architecture that is well aligned with high-end radar, electronic warfare, and image processing applications. The Xilinx UltraScale FPGA provides a platform for Mercury and third party IP and enables offload of protocol translation and embedded security functions. By leveraging the built-in FPGA functional elements in combination with Mercury s extensive software and FPGA IP library, the EnsembleSeries LDS3517 becomes a balanced and affordable building block for mission and sensor processing applications with tight SWaP budget. Optional BuiltSECURE For deployment at the tactical edge and export to allies, EnsembleSeries LDS6525 blades optionally embed BuiltSECURE technology to counter nation-state reverse engineering with System Security Engineering (SSE). BuiltSECURE is built-in SSE that enables turnkey or private and personalized security solutions to be quickly BuiltSECURE configured. The extensible nature of Mercury s SSE delivers systemwide security that evolves over time, building in future proofing. As countermeasures are developed to offset emerging threats, Mercury s security framework keeps pace, maintaining system-wide integrity. Intel 4th Generation Core i7 Haswell Mobile-Class Processor At the heart of the LDS6525 SBC is the Intel 64-bit 4th Generation Core i7-4700eq processor, running at up to 2.4 GHz. This processor includes an Advanced Vector Extensions-2 (AVX2) instruction set which doubles the width of the processor s SIMD engine from 128 bit to 256 bit, and contains Fused Multiply-Add (FMA), delivering a significant improvement in floating-point processing. The 4700EQ includes a large 6 MB cache shared between the cores, allowing many high-performance calculations to remain cache resident. This accelerates processing by eliminating the potential latency required to access DRAM to fetch upcoming data. The processor supports dual high-speed memory controllers, providing up to 25 GB/s of raw memory bandwidth. Each LDS6525 has 8 GB of - DRAM with ECC support. The four processor cores are supported by the latest on-die GT2 GPU for high-definition graphical and intensive, parallel data processing. Programming options include the device s native OpenCL support and the efficiency of Intel s FMA. TM Mercury Systems is the better alternative for affordable, secure processing subsystems designed and made in the USA. These capabilities make us the first commercially based defense electronics company built to meet rapidly evolving next-generation defense challenges. STORAGE STORAGE EXPLOIT DISSEMINATE STORAGE EXPLOIT

2 PMC/XMC P25 P26 XMC2 P64s/X38s to Mezz. I/O on P3 X12d+X8d to I/O on P6 Module Sensors and Devices Environmental Sensors Power Rest IPMC Module State Macine JTAG Bussed Signal Bussed Signals P0 Utility F R O N T XMC P15 P16 PMC1/XMC1 PCI-X 64-bit PCIe to PCIx X12d+X8d to I/O on P4 Bridge x4 PCIe1 MUX x8 PCIe2/3 x8 PCIe2/3 PLX Switch Stra x V P1 P2 Data Expansion P A N E L 8GB NAND Flash Front-panel I/O Adapter PCH RTC FDI (x2) Gen2 DMI (x4) SDRAM GB SDRAM 1600 Intel 4 th Gen. Haswell Mobile 4 Cores + GT2 4GB X16 PCIe2 GigE Controller USB2.0 RS-232/422/485 P64S/X38s to Mezz X12d + X8d to Mezz 1000BASE-BX CP2 1000BASE-BX CP1 1000BASE-T-Enet2 1000BASE-T-Enet1 P3 P4 I/O I/O RS-232/422/485 udb-9 RS-232 (UART-0 or UART-C1) RS-232 (UART-2) x4 PCIe 16msb X38s to Mezz 2x USB3.0 2x USB2.0 P5 Expansion RJ-45 Air-cooled only 1000BASE-T-FP2 P6 I/O LDS6525 Figure 1. LDS6525 functional block diagram Software Defines Interfaces Mercury s next generation, low-latency, high-bandwidth FPGA-enabled interface software allows each mezzanine to refresh/upgrade its mission parameters in real-time and has embedded user customization and security features. This approach has backward compatibility with software protocols, including an inter-processor communication system (ICS ) and message passing interface/open fabrics enterprise distribution (MPI/OFED). PCIe Architecture EnsembleSeries LDS6525 SBCs provide single 81-lane Gen 3 PCIe switches for both on-board switching and off-board expansion. This switch complex provides an x8 PCIe interface to each of the two XMC sites, as well as an x4 connection to a PCIe to PCI-X bridge for the single PMC site. This enables mezzanines to operate at full bandwidth, optimizing the flow of I/O into the processing subsystem. Externally, the LDS6525 implements a full Gen 3 x16 PCIe connection to the OpenVPX expansion plane on the P2 VPX connector. This expansion plane interface enables the LDS6525 to communicate with Mercury s GPU or FPGA based co-processing modules. These configuration options let the SBC effectively act as an upstream/ downstream PCIe switch to allow the chaining of PCIe devices. Card Flexibility EnsembleSeries LDS6525 SBCs have two mezzanine sites: one PMC/XMC and one XMC-only. Each of these standard sites can be configured with off-the-shelf mezzanine cards to bring additional I/O into the system for processing or control. PMC cards are supported with a 32 or 64-bit PCI/PCI-X interface at up to 133 MHz on the PMC/ XMC site, with PMC user-defined I/O mapped to the backplane. XMCs are supported with x8 PCIe on the J15/J25 connector per the VITA 42.3 standard. There are 16 differential pairs and 38 single-ended signals of XMC user I/O mapped to the backplane via the J16/J26 connector. EnsembleSeries LDS6525 SBCs support this configuration with either VITA 42 or VITA 61 XMC connectors. Air-cooled variants are populated by default with the VITA 42 XMC connector, while rugged conductioncooled or Air Flow-By variants are populated by default with VITA 61 XMC connectors. The VITA 61 connector offers superior signal integrity characteristics and has a more rugged design, appropriate for highend XMC modules utilizing Gen 3 PCIe interfaces in environmentally challenging applications.

3 Multiple I/O Options In addition to the flexibility offered via the on-board mezzanine sites, LDS6525 SBCs offer a variety of additional built-in I/O options: One 10/100/1000BASE-T Gigabit Ethernet connection can be routed to the front-panel on air-cooled configurations or to the backplane. One additional 10/100/1000BASE-T Gigabit Ethernet connection is routed to the backplane. Two 1000BASE-BX SERDES Ethernet connections are routed to the backplane per the OpenVPX control plane specification. One TIA-232 serial port is routed to the front-panel on aircooled configurations, or to the backplane on conduction-cooled configurations. When routed to the backplane, the serial interface can be configured for either TIA-232 or TIA-422 signaling. One front-panel interface is available on air-cooled configurations. Two backplane USB interfaces are available (one 2.0, one 3.0) with both air-cooled and conduction-cooled configurations. Two interfaces to the backplane are provided to interface with storage devices. Eight GPIO lines act as discrete I/O usable as input, output, or to generate interrupts on the module. Several additional bused signals enhance the LDS6525 functionality. System EnsembleSeries LDS6525 SBCs implement an advanced system management functionality, architected in OpenVPX standard to enable remote monitoring, alarm management, hardware revision, and health status. Using the standard I2C bus and Intelligent Platform Controller (IPMC) protocol, the on-board system management block implements the IPMC. This enables the LDS6525 SBCs to: Read sensor values Read and write sensor thresholds, allowing an application to react to thermal, voltage or current variations Reset the entire module Power up/down the entire module Retrieve module Field Replaceable Unit (FRU) information Manage remotely by a Chassis Controller at the system level, such as implemented on Mercury s 6U OpenVPX switched fabric modules VPX-REDI The VPX (VITA 46) standard defines 6U and 3U board formats with a modern, high-performance connector set capable of supporting today s high-speed fabric interfaces. VPX is most attractive when paired with the ruggedized enhanced design implementation standard REDI (VITA 48). The EnsembleSeries LDS6525 SBC is a 6U implementation of VPX-REDI, with air and conduction-cooled and Air and Liquid Flow- By variants in the same VPX form factor available for less rugged environments. Targeted primarily for harsh-environment embedded applications, VPX-REDI offers extended mechanical configurations supporting higher functional density, such as two-level maintenance (2LM). 2LM allows maintenance personnel to replace a failed module and restore the system to an operational state quickly, minimizing potential damage to the module. Rugged Air Cooling: Air Flow-By Air- and conduction-cooled subsystems rely on filtration to remove contaminants from their cooling air streams. Mercury s Air Flow-By technology eliminates filtration with the most elegant cooling solution available within a sealed and rugged package. Fully compliant to VITA standards (including VITA 48.7), Air Flow-By maintains the OpenVPX 1-inch pitch requirement, is highly resilient to liquid and particle contamination, boosts SWaP, reduces operating temperature, extends MTBF by an order of magnitude, and enables embedded deployment of the most powerful and reliable processing solutions. Additional Features EnsembleSeries LDS6525 SBCs provide all the features typically found on a single-board computer. In addition to the sophisticated management, subsystem and switched fabric interconnect, LDS6525 SBCs provide users with a toolkit enabling many different application use cases. Features include: Real-time clock with granularity to 1 ms and time measurement of up to 30 years General-purpose timers for synchronization Watchdog timer to support processor interrupt or reset Multiple boot paths, including netboot, USB boot and boot from or the on-board 8 GB flash device. Open Software Environment Mercury leverages over 35 years of multicomputer software expertise, including recent multicore processor expertise, across its many platforms. This strategy is fully applied to the LDS6525 SBC. The same Linux development and run-time environment is implemented on the LDS6525 SBC as on other Intel-based Mercury platforms across the EnsembleSeries 3000, 5000 and 6000 Series. Off-the-shelf open software such as OFED, OpenMPI and MultiCore Plus are fully supported by the software-enabled data plane.

4 Specifications Processor Single 2.4GHz 4th Generation Intel i7 Quad-Core mobile (Haswell mobile) CPU (i7-4700eq) Threads per core: 2 (8 total per CPU) On-die GT2 GPU Processor support: AVX2, 256 bit vector engine incorporating Fused Multiple-Add (FMA) Peak performance per module: Processor: 307 GFLOPS GT2 GPU: 208 GFLOPS PCIe Gen 3 (x8) OpenCL PCH (Platform Controller Hub) LynxPoint mobile QM87 Intelligent Platform Interface (IPMI) On-board IPMI controller Voltage and temperature monitor Geographical address monitor Power/reset control On-board FRU EEPROM interface FPGA, CPU and CPLD interfaces Ethernet Connections 1000BASE-BX Ethernet to P4 connector OpenVPX control plane 10/100/1000BASE-T Ethernet to P4 connector Accessible via OpenVPX RTM or external chassis interface 10/100/1000BASE-T Ethernet connection To front-panel (air-cooled module) or backplane P4 connector (conduction-cooled module) Control plane functions supported by the chipset include: UDP, TCP, SCTP, ARP, IPv4, IPv6, IEEE1588, flow control, 802.1P (priority) and 802.1Q (VLAN) PMC/XMC Sites sites 1 PMC/XMC and 1 XMC PCI-X to PCIe bridge Connects PMC site to on-board PCIe PMC PCI support 33 and 66 MHz PMC PCI-X support 66, 100, and 133 MHz PMC user-defined I/O from J14 to backplane PCIe XMC sites per VITA 42.3 with XMC user-defined I/O from Jn6 to backplane Additional I/O Capabilities One RS-232 serial interface to front-panel (air-cooled) or backplane (conductioncooled) Configurable for RS-232 or RS-422 signaling when routed to backplane One additional RS-232/RS-422 serial interface to backplane One front-panel interface (air-cooled configurations only) One interface to backplane One interface to backplane One DVI interface to backplane Two interfaces to backplane Eight single-ended GPIO interfaces to backplane System signals to backplane NVMRO, Chassis Test, Environmental Bypass, Memory Clear Mechanical 6U OpenVPX 1.0 slot pitch OpenVPX and VPX-REDI Compliance OpenVPX system standard encompasses VITA 46.0, 46.3, 46.4, 46.6, Compatible with VITA 65 VITA 46/48.1/48.2 (REDI) Serial RapidIO, PCIe, 10 Gigabit Ethernet OpenVPX Multi- Architecture System management via IPMB-A and IPMB-B links on P0 management plane Gen 2 serial RapidIO or 10 Gigabit Ethernet interfaces on P1 data plane Full x16 or dual x8 Gen3 PCIe expansion plane to P2 connector Dual 1000BASE-BX Ethernet control plane

5 Environmental Air-cooled Conduction-cooled Commercial (L0) Rugged (L1) Air Flow-By (Rugged L4) Rugged (L3) Ruggedness Moisture/dust protection Typical cooling performance ~170W* ~150W* ~250W* ~150W** Temperature Operating temperatures rate of change Humidity Altitude Vibration Operating* -0ºC to +40ºC -25ºC to +55ºC -40ºC to +55ºC -40ºC to +71ºC Storage -40ºC to +85ºC -55ºC to +85ºC -55ºC to +125ºC -55ºC to +125ºC Operating* Storage N/A 5ºC/min 10ºC/min 10ºC/min 10-90%, 10-90%, 5-95%, 5-95%, 5-95%, 5-95%, 5-95%, 5-95%, Operating* 0-10,000ft 0-30,000ft 0-30,000ft 0-70,000ft Storage 0-30,000ft 0-50,000ft 0-100,000ft 0-100,000ft Random g 2 /Hz; Hz, 1 hr/axis 0.04 g 2 /Hz; Hz, 1 hr/axis Sine N/A N/A Shock z-axis: 20g; x and y-axes: 32g; 0.10 g 2 /Hz; 10G peak; 0.1 g 2 /Hz; 10G peak; Salt/Fog N/A Contact Factory Designed to 10% NaCl Designed to 10% NaCl * Customer must maintain required cfm level ** Card edge should be maintained below 71ºC All products manufactured by Mercury meet elements of the following specifications: All products manufactured by Mercury meet elements of the following specifications: MIL-Q-9858A, MIL-E-5400T, MIL-STD-454M, MIL-STD-45662A, MIL-STD-275E, MIL-STD-883C, MIL-HDBK-217F, MIL-STD-2036 and MIL-I-46058C, and various IPC standards. Mercury s inspection system has been certified in accordance with MIL-I-45208A. Optional Environmental Screening and Analysis Services Cold Start Testing Cold Soak Testing Custom Vibration CFD Thermal Analysis Finite Element Analysis Safety Margin Analysis Temperature Cycling Power Cycling Environmental Stress Screening Additional Services Engineering Change Order (ECO) Notification ECO Control Custom Certificate of Conformity (CofC) Custom UID Labeling Contact factory for additional information Standard Module, Optional Services Alternate Mean Time Between Failure (MTBF) Calculations Hazmat Analysis Diminished Manufacturing Sources (DMS) Longevity of Suppy (LOS) Longevity of Repair (LOR) Innovation That Matters is a registered trademark and Mercury Systems, EnsembleSeries, BuiltSECURE,and Air Flow-By are trademarks of Mercury Systems, Inc. Other product and company names mentioned may be trademarks and/or registered trademarks of their respective holders. Mercury Systems, Inc. believes this information is accurate as of its publication date and is not responsible for any inadvertent errors. The information contained herein is subject to change without notice. Copyright 2019 Mercury Systems, Inc E-0119-DS-LDS6525 INNOVATION THAT MATTERS Corporate Headquarters 50 Minuteman Road Andover, MA USA (978) (866) Fax (978) Europe Mercury Systems, LTD Unit 1 - Easter Park, Benyon Road, Silchester, Reading RG7 2PQ United Kingdom Fax