Made to measure. Since PASCAL Ci4. The intuitive pressure and differential pressure transmitter meeting highest standards.

Transcription

1 Made to measure. Since PASCAL Ci4 The intuitive pressure and differential pressure transmitter meeting highest standards Process industry

2

3 PASCAL Ci4 - High-resolution graphic display - Intuitive operation - Quick setup function - Removable display/control unit Features ፚ ፚ Illuminated dot matrix display (80 x 128 pixels) ፚ ፚ 4 -button operation Numerical display enhanced by bar graph No delay on display when entering data via your own computer Freely rotatable display with detents every 90 to adapt to the installation position Display and control unit can be fitted up to 10 metres away from the measuring point ፚ ፚ Comprehensive parameterisation, simulation and diagnostic functions ፚ ፚ Quick setup provides a fast overview of parameterisation ፚ ፚ SIL2-compliant device and software architecture ፚ ፚ Nominal range 0.25 bar to 400 bar (other measuring ranges on request) Turn-down 100:1 Measuring rate up to 100 Hz Accuracy 0.1 % Output signal ma with HART protocol Many process connections with internal or flush mounted diaphragm Options Explosion protection for gases and dust Material and calibration certificates GOST IP 69K protection rating DTM for FDT applications Removable data logger

4 EASY-TO-CONNECT HIGH-PERFORMANCE The all-rounder for maximum performance The ultimate in measuring accuracy, process robustness combined with intuitive and convenient operation - that s the PASCAL Ci4 range. The HART7 standard guarantees flexible integration into control systems and compatibility with similar equipment. The high-resolution, illuminated graphic display can also be read in poor light and can be fitted up to 10 metres away to service hard-to-reach measuring points. The intuitive 4-button operation assists users with help texts and information dialogues. With just a few clicks, users can have rapid access to device parameters directly on the display. Comprehensive diagnostic and simulation functions round off this highgrade measuring instrument. Communication HART7 standard Integration in SIEMENS PDM 6 and 8, as well as Hand-held Field Communicator 375 / 475 using EDD Integration in FDT environments (z. B. PactWare, FieldCare) via DTM Identical functionality to EDD Simple icons indicate device status Case design Proven basic concept with process connection underneath, electrical connection at the rear and front display. Designed in line with SIL2-compatible device and software architecture. IP 65 / 67 or IP 69K protection rating. Electrical connection based on a modular principle: M 12 circular connector / M 16.5 x 1.5 / M 20 x 1, 5 ½ NPT Three different terminal blocks (spring clamp, pole, screw terminals) Multi-chamber housing with large, easily accessibleterminal compartment External features Type plate with indestructible laser marking Material: Wetted parts are made of stainless steel Hygienic version: Stainless steel front cover with safety glass Process connections Wide range of different threaded connectors Suitable for use with all LABOM diaphragm seals Additional components, like capillaries or temperature decouplers, are also available Hygienic model Indestructible laser engraving Spacious terminal box Wide range of process connections

5 OUTSTANDING FUNCTIONALITY Optimised menue navigation Removable control unit The display and control unit can optionally be fitted up to 10 metres away from the measuring point if it is concealed or hard-to-reach Fully-operational control module with the same functionality as when operating directly on the unit It can be fixed in place by means of a wall bracket or clips INTUITIVE TO OPERATE The quick setup summarises all the major setting parameters in a single menu. Various configurable displays enable users to select which and how many subordinate variables are displayed. Thus, for example, a freely configurable device or measuring point description can be shown on the display next to the measuring value. Practical display modes The display structure can be adapted individually of the measuring point. There are five different display modes with configurable content available. Calibration options Zero point correction Position correction Lower / upper adjustment Current adjustment Diagnostic functions Resettable pointers for pressure and temperature (sensor) Operating hour counter Maintenance timer, device generates a service signal after a period of time that can be set (displayed by the icon on the display and by HART) Error messages: The device displays the last error message in plain text Simulation functions CURRENT SIMULATION: Adjustment of fixed output signal Range: ma Alarm current can also be simulated PRESSURE SIMULATION: Pressure is set to a fixed value Range: Normal range of the device Damping and output function (table) are also tested The control unit was removed and the case sealed by a blind cap.

6 Pascal Ci4 Pressure transmitter Konzept, Design, Fotografie und Realisierung: Ci4100 for general process technology Nominal range 0.25 to 400 bar Temperature of process media C Ci4110 for Food / Pharmaceuticals / Biotechnology Nominal range 0.25 to 40 bar Temperature of process media C Ci4120 for diaphragm seals / chemical industry Nominal range 0.25 to 400 bar Temperature of process media C Pascal Ci4 Differential pressure transmitter Approvals / Certificates Ci4300 for differential pressure Nominal range 0.25 to 16 bar Temperature of process media C Ci4330 for application with diaphragm seals Nominal range 0.25 to 16 bar Temperature of process media C GOST-R Certificate of Conformity and Declaration Russian Federation Certificate of Measuring Equipment Calibration Certificate as per DIN EN Material Certificate as per DIN EN Explosion protection for gases and dust, ATEX II 1/2 G Ex ia IIC T4/ T5/T6 II 2 D Ex ia IIIC SIL2 HART protocol LABOM Mess- und Regeltechnik GmbH Im Gewerbepark Hude Germany P.O. Box Hude Germany Phone Fax info@labom.com