DRIVELINK COMBO USB3.0

Size: px

Start display at page:

Download "DRIVELINK COMBO USB3.0"

Elfreda Greene
6 years ago
Views:

1 MNUL XX

Table of contents 1. Features 2. Parts and accessories 3. The device at a glance 4. Installing the hardware Dear customer! Congratulations on purchasing this premium quality SHRKO- ON product.

2 Table of contents 1. Features 2. Parts and accessories 3. The device at a glance 4. Installing the hardware Dear customer! Congratulations on purchasing this premium quality SHRKO- ON product. For a long product life-time, and to take full advantage of this product, we recommend that you read this manual completely. Have a good time with our product! 2. Parts and accessories B C D E SHRKOON Technologies 1. Features Enablestheexternalusageof2.5",3.5"and5.25" STandIDEdrivesviaUSB3.0 SuitableforHDDs,SSDsandODDs USB3.0interface(compatiblewithUSB2.0and USB1.x) Datatransferrate:max.5Gbit/s Optionalwriteprotection Status/transferLED Multi-purpose(PC,Laptopetc.) NoadditionaldriversneededforWindowsXP/ Vista/7/8(32-and64-bit) DriveLinkComboUSB3.0 B USB3.0cable(type>typeB) C IDEdatacable D 4-pinpowercableforIDEdevices (3.5"and5.25") E Poweradapter(12V/4) If you are missing any of the items listed above, please contact our customer service immediately: support@sharkoon.com (Germany and Europe) support@sharkoon.com.tw (international). 1

3. The device at a glance B C D G E F Connectorfor2.5"IDEHDDs B Connectorfor3.

5"IDEHDDs C WriteprotectionforIDEHDDs c WriteprotectionactiveLED d

WriteprotectionactiveLED f WriteprotectioninactiveLED E PowerLED F

25") G On/offswitch 25") a b B c e d f USB3.

3 3. The device at a glance B C D G E F Connectorfor2.5"IDEHDDs B Connectorfor3.5"and5.25"IDEdevices a Dataconnectorfor3.5"IDEHDDs b 4-pinpowerconnectorfor3.5"IDEHDDs C WriteprotectionforIDEHDDs c WriteprotectionactiveLED d WriteprotectioninactiveLED D WriteprotectionforSTHDDs e WriteprotectionactiveLED f WriteprotectioninactiveLED E PowerLED F ConnectorforSTdevices(2.5",3.5"and5.25") G On/offswitch ConnectorforSTdevices(2.5",3.5"and5.25") a b B c e d f USB3.0connector B ISOpowerconnector *Note on the write protection: The write protection can only be enabled/disabled when the DriveLink Combo USB3.0 is switched off! 2

4 4. Installing the hardware Before you plug the DriveLink Combo USB3.0 into your PC/ Laptop, connect the peripheral devices to the DriveLink Combo USB3.0. Before using the hard disk drive for the first time, it must be properly partitioned and formatted. To format the HDD, right-click on COMPUTER and then select MNGE. If using Windows 7: select STRT, right-click COMPUTER and then select MNGE. fter that, select DISK MNGEMENT. Here all formatable HDDs and drives will be clearly displayed. Right-click the USB HDD and select PRTITION. The HDD will probably need to be initialized; we suggest using the NTFS data system for Windows PCs. Format the HDD to complete the procedure. Warning: Make sure to select the correct USB hard disk drive for formatting, due to all data saved on the HDD being lost when partitioning and formatting! 1.ConnecttheincludedpoweradaptertotheDriveLink ComboUSB3.0andapoweroutlet. c)3.5"and5.25"idedevicesconnecttotherespective portofthedrivelinkcombousb3.0viatheincluded IDEdatacable.Powerisprovidedviatheincluded4-pin powercableforidedevices. d)3.5"and5.25"stdevices: ST devices are directly plugged to the respective port ofthedrivelinkcombousb3.0,whichalsopowers themwithoutanyadditionalcabling. 4.SwitchontheDriveLinkComboUSB3.0.Thedevicewillbe detectedandinstalledautomatically.connectedhdds/ opticaldeviceswillbedisplayedinthefilemanager. There is no need to install additional drivers. Before you shut down your PC, remove the DriveLink Combo USB3.0 from your system s hardware configuration by double-clicking the symbol in the task bar. menu will open up. Select the DriveLink Combo USB3.0 to securely remove it. Then switch off the DriveLink and shut down your PC. 2.ConnecttheincludedUSB3.0cabletotherespective connectorofthedrivelinkcombousb3.0andausb3.0 port on your PC. 3.ConnectIDEandSTdevicestotheDriveLinkCombo USB3.0asdescribedbelow: a)2.5"idehddsaredirectlypluggedtotherespectiveport ofthedrivelinkcombousb3.0,whichalsopowersthem withoutanyadditionalcabling. b)2.5"sthddsaredirectlypluggedtotherespective portofthedrivelinkcombousb3.0,whichalsopowers themwithoutanyadditionalcabling. 3

5 Warning: For potential loss of data, especially due to inappropriate handling, SHRKOONassumesnoliability. llnamedproductsanddescriptionsaretrademarksand/or registered trademarks of the respective manufacturers and are accepted as protected. s a continuing policy of product improvement at SHRKOON, the designandspecificationsaresubjecttochangewithoutpriornotice. Nationalproductspecificationsmayvary. llrightsreservedespecially(alsoinextracts)fortranslation, reprinting,reproductionbycopyingorothertechnicalmeans. Infringements will lead to compensation. ll rights reserved especially in case of assignation of patent or utility patent.meansofdeliveryandtechnicalmodificationsreserved. Disposal of your old product Your product is designed and manufactured with high quality materials andcomponents,whichcanberecycledandreused. Whenthiscrossed-outwheeledbinsymbolisattachedtoaproduct,it meanstheproductiscoveredbytheeuropeandirective2002/96/ec. Pleasebeinformedaboutthelocalseparatecollectionsystemfor electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences to the environment and human health. SHRKOON Technologies 2013 Sharkoon Technologies GmbH Siemensstraße 38, Linden, Germany info@sharkoon.com 4

Media Reader IV USB 3.0. Manual

Media Reader IV USB 3.0. Manual Media Reader IV USB 3.0 Manual Table of Contents 1. Properties 3 2. Specifications 3 2.1 Supported Card Formats 3 2.2 General 3 2.3 System Requirements 4 3. Package Contents 4 4. Installation 4 Dear Customer,