PRIMERGY RX2510 M2 1U Rack Server

Transcription

1 1U Rack Server Chapter Folder Content Cover List of content, Instructions for usage of this configurator, abbreviations Description System Description for easier understanding 1 describes base unit of RX2510 M2 Base 2 describes rack mount kits and services 3 CPU Order code and Infos of E5-2600v4 series processor 4 RAM DDR4 System memory (RAM) and memory modes GFX 5 n.a. for PRIMERGY RX2510 M2 6 HD_cage n.a. for PRIMERGY RX2510 M2 7 RAID SAS / RAID Controller and components 8 ODD optical disk drives (DVD, DVD-rw, Blu ray) 9 Backup n.a. for PRIMERGY RX2510 M2 10 HD_SSD Storage drives - PCIe SSD - SAS/SATA SSD & HDD 11 LAN Components 12 LAN_FC_IB Fibre Channel Controller 13 Infiniband Controller n.a. for PRIMERGY RX2510 M2 14 PSU Power supply units and cables, country specific opt. 15 USB_devices Keyboards, Mice, USB devices 16 others System Management, ATD, RS232 port LLC n.a. for PRIMERGY RX2510 M2

2 Instructions This document contains basic product and configuration information supporting you in more complicated configurations. In any case we recommend to use the PC-/SystemArchitect to make sure, that you configure a valid system. This System configurator is divided into several chapters. They are identical to the current price list and PC- /SystemArchitect. Please follow this document step by step from the top to the bottom. Chapter xx - description of chapter Text fields with grey color offer extra information for related topics (e.g prerequesites, technical back ground, configuration rules, limitations, S26361-F4610-E2 S26361-F4610-L3 PLAN 2x1Gb Ethern. Controller i350-t2 chip (based on Intel Powerville) offers 2x1Gb RJ45 connectors PCIe Gen2 x4 full height card max. 6x per system <-- order code E-part (bold) -- <-- order code L-part (bold) <-- "name" of this part <--description of this part, in same cases as well description of content <--requires a free PCIe slot --> means total amount of PCIe slots reduced <--indicates how often this part can be configured in the related Server For further information see: Link to datasheet: xxx (internet) (extranet) Fujitsu is providing the content of this document with very high accuracy. In case you identify a mistake, we would kindly encourage you to inform us. We kindly ask for understanding, that errors still may occur and that Fujitsu may change this document without notice

3 Abbreviations SAS Drives, RAID Serial attached SCSI Device (HDD, SSD, LTO drives); SAS2.0 = 6GBit/s; SAS3.0 = 12GBit/s SATA Drives, RAID Serial ATA (HDD, SSD) current SATA speed = 6GBit/s HDD Drives Hard disk drive (Non volatile storage device), 2.5" (SFF) or 3.5" (LFF) SSD Drives Solid state disk (Non volatile storage device), 2.5" (SFF) SFF Drives small form factor (=2.5") LFF Drives large form factor (=3.5") CPU Processor central processing unit ("processor") RAID Drives, RAID RAID 0 = max speed, RAID 1 = mirroring, RAID 5 = 1 out of x drives is spare Spaces OS Microsoft spaces, optimized in Win2012 R2 offers software RAID and storage tiering vsan OS storage tiering RAID offers optimized storage allocation (fast area for "hot data"; slower area for "cold data") hot data Drives Data which are currently being processed cold data Drives Data which are currently not processed (only stored) ODD Drives optical disk drive (i.e. DVD-player, DVD-burner, Blu ray player, blu ray burner) OS operating system OS=operating system - required for running, organize and administrating the server E-Part "Einbau-Part" "e.g. S26361-F1234-E240" ordercode with "E" means it is either integrated into to Server (CPU, Mem,..) or integrated in the shipping box (Keyboard, Mouse,..) L-Part "Lose Lieferung-Part" "e.g. S26361-F1234-L240" ordercode with "L" means, the part will be shipped with extra package, may be as well with extra shipment

4 PRIMERGY RX2510 M2 schematics of the System board and fans PRIMERGY RX2510 M2 rear view with PSU and PCIe slots PRIMERGY RX2510 M2 front view with drives and operation panel Description Page 4 of 21

5 Chapter 1 - base unit Start Power supply units & cooling The PRIMERGY RX2510 M2 offer bays for 1x or 2x direct attached hot plug (opt. redundant) power supply units of 450W or 800W with up to 96% efficiency. The PRIMERGY RX2510 M2 is equipped with ultimate performance processor heat pipes and 2+1 (with 1x CPU) or 5+1 (with 2x CPU) high performance single hot plug fans. Server Management irmc S4 (integrated Remote Management Controller) on-board with dedicated (or shared) 10/100/1000 Service LAN-port and integrated graphics controller. With the integrated onboard indicators and controls You can highlight easily failed components via LEDs. The LEDs can be displayed during service even without mains connection by simply pressing the "indicate CSS" button. Platform Fujitsu Systemboard D3279 "made in Germany" based on Chipset Intel C610 series > 2 serial QPI links (Quick Path Interconnect) > Up to two Xeon E v4 series CPUs Slots: as standard 4 PCIe slots are on Board - please see schematics in "description" > 3 PCIe slots low profile, 167mm first CPU: Slot 1 PCIe-Gen3 x8 (int.) - only for internal modular RAID controller Slot 2 PCIe-Gen3 x8 Slot 3 PCIe-Gen3 x16 > 1 PCIe slot low profile, 167mm second CPU: Slot 4 PCIe-Gen3 x8 PCIe controller population has to be according to internal or external connectivity requirements. The system offers 1x internal PCIe slot for RAID controller only and 3x free configurable PCIe slots for other PCIe controllers. The required riser cards for the above configuration are part of the standard delivery. Onboard RAID 0/1 6Gbit/s available for up to 4x 3.5" or 4x 2.5" SATA drives System RAM up to DDR MHz Up to 12 memory slots for max. 384GB DDR4 RAM available (6 slots per CPU). Memory speed depends on CPU and configuration, please see folder "CPU" and "RAM" for further details. Software * ServerView Suite Software incl. ServerStart, ServerBooks, Management Software and Updates Interfaces at rear side - 1 RJ45 for management LAN (1 Gbit) - 1x VGA (15 pins) - 2x USB 3.0-1x USB2.0-1x serial interface (COM1) Connectivity Interfaces at front - 2x USB 3.0 Interfaces internal - 1x USB 3.0, 1x UFM - 1x SATA DOM - 1x 4* SATA 6G S26361-K1582-V101 RX2510 M2 4x3.5" Base unit for up to 4x 3.5" drives. D3279 systemboard. Delivery in single packaging, minimum order quantity 1 unit. S26361-K1582-V111 RX2510 M2 4x3.5" Bulk Base unit for up to 4x 3.5" drives. D3279 systemboard. Delivery in bulk packaging, minimum order quantity 8 units. Delivery in single packaging S26361-K1582-V301 RX2510 M2 4x2.5" Base unit for up to 4x 2.5" drives (expandable to 8x 2.5"). D3279 systemboard. Delivery in single packaging, minimum order quantity 1 unit. Delivery in bulk packaging (not available in Japan and S26361-K1582-V311 RX2510 M2 4x2.5" Bulk Base unit for up to 4x 2.5" drives (expandable to 8x2.5"). D3279 systemboard. Delivery in bulk packaging, minimum order quantity 8 units. S26361-K1582-V401 RX2510 M2 8x2.5" Base unit for up to 8x 2.5" drives. D3279 systemboard. Delivery in single packaging, minimum order quantity 1 unit. Option for bases -V301 / -V311 S26361-F1582-L8 S26361-K1582-V411 RX2510 M2 8x2.5" Bulk Base unit for up to 8x 2.5" drives. D3279 systemboard. Delivery in bulk packaging, minimum order quantity 8 units. Upgrade kit for 8x 2.5" Increases the amount of drives to 8x 2.5" HDD/SSD; Incl. SAS 3.0 Backplane and SAS 3.0 cables. max 1x per system PRIMECENTER Rack base Page 5 of 21

6 Chapter 2 - Rack architecture PRIMECENTER Rack S26361-F2735-E111 No Rackmount-Kit No rackmount. Upgrade later possible with L-part When NO RMK is selected, the server will be equipped with demountable Quick Release Lever support elements. S26361-F2735-E400 S26361-F2735-L400 RMK-F1_CMA, Slimline telescopic drop-in rail, full extractical, supports 1-hand-mounting Rackmount Kit ex factory > 1 pair of vario carrier with variable length & quick release lever support > 1 pair of telescopic drop-in rails prepared for Cable Management Arm 1x per system S26361-F2735-E401 S26361-F2735-L401 RMK-F1, Slimline telescopic drop-in rail, full extractical, supports 1- hand-mounting Rackmount Kit ex factory > 1 pair of vario carrier with variable length & quick release lever support > 1 pair of telescopic drop-in rails 1x per system S26361-F2735-E421 S26361-F2735-L421 RMK-F1, Slimline, Slide-In Rail Rackmount Kit ex factory > 1 pair of vario carrier with variable length & Southco screw > 1 pair of slide-in rails with partial extraction 1x per system S26361-F2735-E81 S26361-F2735-L81 1U cable management arm (CMA) for 1U server for direct mounting at Rack mounting kit F1 1x per system S26361-F2735-E422/L422 RMK-F1, Slide-In Rail, QRL Rackmount Kit ex factory > 1 pair of vario carrier with variable length & QRL > 1 pair of slide-in rails with partial extraction 1x per system S26361-F2735-L7 Lateral cable management can only be mounted in asymetrical Racks. The lateral cable mgmt. Is mounted 1 level (1U)above the S26361-F2735-L8 cable management arm (dragged) universal usage in PRIMECENTER and 3rd party racks. Not with CMA! S26361-F4530-E11 S26361-F2735-L10 Bracket 1U in asymmetrical racks S26361-F4530-E10 Mounting of RMK in symmetrical racks (no support brackets needed) S26361-F1647-E302 Installation ex factory in a PRIMECENTER Rack Fujitsu will deliver the PRIMERGY system mounted in a Rack System and all wired connections are tested with PRIMECENTER M1 16U, 24U, 42U rack - Systems and components will be delivered installed in the rack Only together with a PC M1 rack (S26361-K827-Vxxx) max. 1x per System The installation service is to be ordered once per installable server/storage subsystem, in order to get the server/storage subsystem mounted into the racks. In case of not-installed server and subsystems this service has to be ordered, to get the mounting kits and the cables installed. S26361-F1492-E210 S26361-F1492-L210 Full height riser card kit Offers 1x FH Gen 3 PCIe slots: 1* x16 for full height PCIe cards with max. 167mm lenght will be inserted instead of Slot 3 and Slot 4.! Low profile riser card for slot 3 and 4 will not be delivered with base unit if configured. will be inserted into Slot 4 PCIe 3.0 x16! Low profile riser card for slot 3 and 4 will not be delivered with base unit if Full height riser card kit will be configured. A base Page 6 of 21

7 A Chapter 3 - CPU There are 2 processor sockets available. Please configure minimum 1 Processor, maximum 2 processors. >> In case of Dual processor operation, processor 2 must be the same as processor 1. >> for the processors on the left side (marked with blue headers) you may choose 1x or 2x CPUs >> for the processors on the right side (marked with orange headers) you must choose 2x CPUs ("Dual processor only") * HT = Hyper Threading Xeon E5-26xx v4 series (R) Basic 64-bit Intel Xeon processor supporting 1.866MHz & QPI 6.4 GT/s Xeon E5-2603v4 6C/6T 1.70GHz 15MB 6.4GT/s 1866MHz 85W S26361-F3933-E103 Xeon E5-2609v4 8C/8T 1.70GHz 20MB 6.4GT/s 1866MHz 85W S26361-F3933-E109 Xeon E5-26xx v4 series (R) Standard 64-bit Intel Xeon processor supporting HT*, 2133 MHz & QPI Bus 8.0 GT/s Xeon E5-2620v4 8C/16T 2.10GHz 20MB 8.0GT/s 2133MHz 85W S26361-F3933-E120 Xeon E5-2630v4 10C/20T 2.20GHz 25MB 8.0GT/s 2133MHz 85W S26361-F3933-E130 Xeon E5-2640v4 10C/20T 2.40GHz 20MB 8.0GT/s 2133MHz 90W S26361-F3933-E140 Xeon E5-26xx v4 series (R) Advanced 64-bit Intel Xeon processor supporting HT*, 2400 MHz & QPI 9.6 GT/s Xeon E5-2650v4 12C/24T 2.20GHz 30MB 9.6GT/s 2400MHz 105W S26361-F3933-E150 S26361-F3933-L550 Xeon E5-2660v4 14C/28T 2.00GHz 35MB 9.6GT/s 2400MHz 105W S26361-F3933-E160 n.a. Xeon E5-26xx v4 series (R) Frequency optimized 64-bit Intel Xeon processor supporting HT*, 2133 MHz & QPI 8.0 GT/s Xeon E5-2623v4 4C/8T 2.60GHz 10MB 8.0GT/s 2133MHz 85W S26361-F3933-E123 Xeon E5-26xx v4 series (R) Low Power 64-bit Intel Xeon processor supporting HT*, 2133/2400 MHz & QPI 8.0 GT/s Xeon E5-2630Lv4 10C/20T 1.80GHz 25MB 8.0GT/s 2133MHz 55W S26361-F3933-E131 Xeon E5-2650Lv4 14C/28T 1.70GHz 35MB 9.6GT/s 2400MHz 65W S26361-F3933-E151 S26361-F3933-L303 S26361-F3933-L309 S26361-F3933-L320 S26361-F3933-L330 S26361-F3933-L340 S26361-F3933-L323 n.a. n.a. S26361-F3849-E100 Cooler Kit 2nd CPU Contains 3x fans and cooling equipment to support the 2nd CPU in RX2510. Xeon E5-26xx v4 series (R) Basic 64-bit Intel Xeon processor supporting 1.866MHz & QPI 6.4 GT/s Xeon E5-2603v4 6C/6T 1.70GHz 15MB 6.4GT/s 1866MHz 85W S26361-F3933-E103 Xeon E5-2609v4 8C/8T 1.70GHz 20MB 6.4GT/s 1866MHz 85W S26361-F3933-E109 Xeon E5-26xx v4 series (R) Standard 64-bit Intel Xeon processor supporting HT*, 2133 MHz & QPI Bus 8.0 GT/s Xeon E5-2620v4 8C/16T 2.10GHz 20MB 8.0GT/s 2133MHz 85W S26361-F3933-E120 Xeon E5-2630v4 10C/20T 2.20GHz 25MB 8.0GT/s 2133MHz 85W S26361-F3933-E130 Xeon E5-2640v4 10C/20T 2.40GHz 20MB 8.0GT/s 2133MHz 90W S26361-F3933-E140 Xeon E5-26xx v4 series (R) Advanced 64-bit Intel Xeon processor supporting HT*, 2400 MHz & QPI 9.6 GT/s Xeon E5-2650v4 12C/24T 2.20GHz 30MB 9.6GT/s 2400MHz 105W S26361-F3933-E150 Xeon E5-2660v4 14C/28T 2.00GHz 35MB 9.6GT/s 2400MHz 105W S26361-F3933-E160 Xeon E5-26xx v4 series (R) Frequency optimized 64-bit Intel Xeon processor supporting HT*, 2133 MHz & QPI 8.0 GT/s Xeon E5-2623v4 4C/8T 2.60GHz 10MB 8.0GT/s 2133MHz 85W S26361-F3933-E123 Xeon E5-26xx v4 series (R) Low Power 64-bit Intel Xeon processor supporting HT*, 1866 MHz & QPI 8.0 GT/s Xeon E5-2630Lv4 10C/20T 1.80GHz 25MB 8.0GT/s 2133MHz 55W S26361-F3933-E131 Xeon E5-2650Lv4 14C/28T 1.70GHz 35MB 9.6GT/s 2400MHz 65W S26361-F3933-E151 B CPU Page 7 of 21

8 Chapter 4 - DDR4 System memory B The Systemboard of RX2510 M2, D3279, offers 12 DDR4 slots with up to 2.400MHz. 384GB DDR4 RDIMM (12x 32GB 2R total) The memory area is divided into 2 channels per CPU with 3 slots each up to MHz with 1DPC R-DIMM (depending on CPU*) up to MHz with 2DPC (depending on CPU*) up to MHz with 3DPC DDR4 memory is operated at 1.2V Registered and load reduced DIMM cannot be operated together in one Server. * = means: some CPU types support less than 2.400MHz, please check the details in the chapter "CPU" 8GB (1x8GB) 1Rx4 DDR R ECC 16GB (1x16GB) 2Rx4 DDR R ECC 32GB (1x32GB) 2Rx4 DDR R ECC Registered Memory (RDIMM) with SDDC (chipkill) and ECC support single ranked S26361-F3934-E511 dual ranked S26361-F3934-E512 dual ranked S26361-F3934-E515 S26361-F3934-L511 S26361-F3934-L512 S26361-F3934-L515 Registered Memory (RDIMM) with ECC but without SDDC (chipkill) support (within FTS sales region on special release only) 4GB (1x4GB) 1Rx8 DDR R ECC single ranked S26361-F3934-E510 S26361-F3934-L510 C Detailed infomation Mode Configuration RDIMM RDIMM x8 x4 SDDC (chipkill) support any no yes supports detecting multi-bit errors Independant channel mode 1, or 2 Modules per Bank yes yes offers max. flexibility, upgradeability, capacity Performance mode 4 identical Modules / Bank yes yes offers maximum performance and capacity *) For the delivery ex factory the system will be prepared with dedicated BIOS setting. Capacity Configuration RDIMM Notes Min. Memory per CPU 1 Module / CPU 4GB with one CPU Max. Memory per CPU 6 Modules / CPU 192GB with one CPU Max. Memory per System 12 Modules / System 384GB if second CPU is configured Use case, advantage Max. DDR4 memory speed depends on the memory configuration (DIMM per channel) and the type of CPU. The memory channel with the lowest speed defines the speed of all CPU channels in the system Mem. Speed provided by CPU Maximum memory-bus speed [MHz] Type of Memory RDIMM 2400MHz CPU type \ Dimm per channel 1 DPC 2 DPC 3 DPC CPU with 2.400MHz DDR4 Bus CPU with 2.133MHz DDR4 Bus CPU with 1.866MHz DDR4 Bus The memory sockets on the Systemboards are color coded Bank I black sockets Bank II blue sockets Bank III green sockets RAM Page 8 of 21

9 Independant channel mode Channel C Channel D Channel E Channel F required required if 2nd CPU is configured Bank I Data Data Data Data optional, any type (black sockets) Bank II Data Data Data Data (blue sockets) Bank III Data Data Data Data (green sockets) 1st XEON CPU (4-14 Core) 2nd XEON CPU (4-14 Core) Performance Channel Mode Channel C Channel D Channel E Channel F required required if 2nd CPU is configured Bank I Data Data Data Data optional, same type in Bank per CPU (black sockets) Bank II Data Data Data Data (blue sockets) Bank III Data Data Data Data (green sockets) 1st XEON CPU (4-14 Core) 2nd XEON CPU (4-14 Core) RAM Page 9 of 21

10 Chapter 7 - SAS / RAID Controller C PRIMERGY RX2510 M2 provides onboard a SATA 6G Controller (Wellsburg) for up to 8 SATA drives. Therefore the onboard SATA RAID controller can only be used for base units with up to 4x HDD (S26361-K1582-V101, or -V111). If you decide for the onboard RAID controller, you will receive a cable with SAS 2.0 connector at the systemboard side. Please be aware, that in case you update to a SAS3.0 RAID controller later (after purchase) you need to order the cable kit S26361-F1537-L200 (please see below) extra. Internal drive RAID / SAS Controllers S26361-F3842-E2 S26361-F3842-E1 S26361-F5243-E1 S26361-F5243-E2* S26361-F3842-L502 S26361-F3842-L501 S26361-F5243-L1 S26361-F5243-L2 PSAS CP400i SAS Contr. PRAID CP400i RAID Contr. PRAID EP400i RAID Contr. PRAID EP420i RAID Contr. based on LSI SAS3008 based on LSI SAS3008 based on LSI SAS3108 based on LSI SAS3108 supports up to 8x 3G, 6G & 12G SAS/SATA HDD/ SSD supports up to 8x 3G, 6G & 12G SAS/SATA HDD/ SSD supports up to 8x 3G, 6G & 12G SAS/SATA HDD/ SSD supports up to 8x 3G, 6G & 12G SAS/SATA HDD/ SSD No Cache RAID 0, 1 requires 1x LP PCIe 3.0 x8 (int.) No Cache RAID 0, 1, 1E, 10, 5, 50 requires 1x LP PCIe 3.0 x8 (int.) 1GB Cache (ECC), opt. FBU RAID 0, 1, 1E, 5, 50, 6 & 60 requires 1x LP PCIe 3.0 x8 (int.) 2GB Cache (ECC), opt. FBU RAID 0, 1, 1E, 5, 50, 6 & 60 requires 1x LP PCIe 3.0 x8 (int.) **It is strongly recommended to order SafeStore (SED) RAID controller with SED HDD or SSD devices for SafeStore (SED) functionality *S26361-F5243-E4** PRAID EP420i for SafeStore supports HDD Encryption Only 1 FBU can be integrated in a RX2510 M2. S26361-F5243-E100 S26361-F5243-L100 TFM module for 1GB Cache NV-RAM & FBU control logic max. 1x per controller S26361-F5243-E125 S26361-F5243-L111 FBU Option for PRAID EP4xx Supercap securing the power supply of the RAID controller in case of power failure, including cable with 25cm lenght max. 1x per controller S26361-F5243-E200 S26361-F5243-L200 TFM module for 2GB Cache NV-RAM & FBU control logic max. 1x per controller RAID Advanced Software free of charge test licence available: PRIMERGY-PM FastPath is free of charge S26361-F5243-E670 S26361-F5243-L670 RAID Advanced SW Option CacheCade License Activation Key for CacheCade 2.0 max. 1x per controller S26361-F1537-L200 SAS3.0 cable kit contains the following cables: T26139-Y4040-V9, 540mm connects to the left 4x 2.5" rectangular backplane. T26139-Y4040-V11, 700mm connects to the right 4x 2.5" L-shaped backplane and T26139-Y4040-V21, connects to the 4x 3.5" BPL required for later upgrade from onboard SATA 6G controller to a dedicated SAS3.0 RAID controller! The SAS 3.0 cable kit (S26361-F1537-L200) is only required for later upgrades, and just if the onboard SATA 6G RAID controller (which has a SAS 2.0 connector) was selected.! Orders ex factory always come with the fitting cables. D RAID Page 10 of 21

11 D External drive RAID / SAS Controllers S26361-F3845-E201 S26361-F3845-L501 PSAS CP400e SAS Controller based on LSI SAS3008 supports up to 8x external 3G, 6G & 12G SAS/SATA HDD/ SSD or LTO drives No Cache no RAID requires 1x LP PCIe 3.0 x8 max. 2x per system S26361-F3847-E202* S26361-F3847-L502 PRAID EP420e RAID Controller based on LSI SAS 3108 supports up to 8x external 12G SAS/SATA HDD/ SSD or LTO drives 2GB Cache RAID 0, 1, 1E, 5, 50, 6 & 60 requires 1x LP PCIe 3.0 x8 max. 2x per system *S26361-F3847-E204** PRAID EP420i for SafeStore supports HDD Encryption S26361-F5243-E200 S26361-F5243-L200 TFM module for 2GB Cache NV-RAM & FBU control logic max. 1x per controller Only 1 FBU can be integrated in a PRIMERGY RX2510 M2. S26361-F5243-E125 S26361-F5243-L111 FBU Option for PRAID EP4xx Supercap securing the power supply of the RAID controller in case of power failure, including cable with 25cm lenght max. 1x per controller ** SafeStore (SED) RAID controller require SED HDD or SSD devices RAID Advanced Software free of charge test licence available: PRIMERGY-PM FastPath is free of charge S26361-F5243-E670 S26361-F5243-L670 RAID Advanced SW Option CacheCade License Activation Key for CacheCade 2.0 max. 1x per controller E RAID Page 11 of 21

12 Chapter 8 - ODD optical disk drives E Config with 1x 9.5mm bay Not yet released for Japan; S26361-F3778-E1 S26361-F3641-E6 S26361-F3718-E2 DVD-RW supermulti ultra slim Blu-ray Triple Writer ultra slim DVD-ROM all formats, DUAL/DL, DVD-RAM only W2K, W3K and Linux 6x BD-RW, 8x DVD, 24x CD, BD DL and all CD/DVD formats 16x DVD; 48x CD-ROM 9.5mm, black bezel 9.5mm, black bezel 9.5mm black bezel F ODD Page 12 of 21

13 Chapter 10 - storage drives F 2.5" SSD and SATADOM SAS drives require a dedicated SAS / RAID Controller Hard Disk Sector Format Information: 512n HDD: 512 byte sectors on the drive media. 512e (e=emulation) HDD: 4K physical sectors on the drive media with 512 byte logical configuration. 512e HDD Disk Drives: VMware 6.0 or earlier is not supported. 512n & 512e HDDs can be mixed, but cannot be used in one logical RAID volume. When using SSDs with VMware ESXi, select the SSDs that meet the endurance requirement described in KB below. dwpd (5y): drive writes per day over 5 years. HDD Classes: Business-Critical (BC) -SATA=Nearline SATA Enterprise Drives / 7.2Krpm, SATA 6G. Business-Critical (BC) -SAS=Nearline SATA Enterprise Drives / 7.2Krpm, SAS 6G or SAS 12G. Mission-Critical (MC)=SAS 10K and SAS 15K: Enterprise Drives with max. performance and reliability. Warranty: SSD and SATA DOM have a built-in Wear-Out indicator. In this case the warranty for such a component, as an exception to the system warranty, is restricted to the time period until the indicator reaches the exhaust level. SSD SATA 2.5" (SFF) Enterprise with hot plug/hot replace tray capacity Formfactor Interface Category dwpd (5y) order code E-part order code L-part 240GB 2.5" (SFF) 6Gb/s read / write 3,6 S26361-F5675-E240 S26361-F5675-L GB 2.5" (SFF) 6Gb/s read / write 3,6 S26361-F5675-E480 S26361-F5675-L GB 2.5" (SFF) 6Gb/s read / write 3 S26361-F5588-E960 S26361-F5588-L TB 2.5" (SFF) 6Gb/s read / write 3 S26361-F5588-E192 S26361-F5588-L GB 2.5" (SFF) 6Gb/s read intensive 1 S26361-F5632-E240 S26361-F5632-L GB 2.5" (SFF) 6Gb/s read intensive 1 S26361-F5632-E480 S26361-F5632-L GB 2.5" (SFF) 6Gb/s read intensive 1 S26361-F5632-E800 S26361-F5632-L GB 2.5" (SFF) 6Gb/s read intensive 1 S26361-F5632-E960 S26361-F5632-L TB 2.5" (SFF) 6Gb/s read intensive 1 S26361-F5632-E120 S26361-F5632-L TB 2.5" (SFF) 6Gb/s read intensive 1 S26361-F5632-E160 S26361-F5632-L160 max. 8x - depending on base unit & configuration SSD SATA 2.5" Mixed Use S4600 (SFF) Enterprise with hot plug/hot replace tray Capacity Formfactor Interface Endurance DWPD order code E-part order code L-part 240GB 2.5" (SFF) SATA 6Gb/s Mixed Use 3,1 as soon as available S26361-F5694-E240 S26361-F5694-L GB 2.5" (SFF) SATA 6Gb/s Mixed Use 3,3 as soon as available S26361-F5694-E480 S26361-F5694-L GB 2.5" (SFF) SATA 6Gb/s Mixed Use 3,0 as soon as available S26361-F5694-E960 S26361-F5694-L TB 2.5" (SFF) SATA 6Gb/s Mixed Use 3,0 as soon as available S26361-F5694-E192 S26361-F5694-L192 max. 8x - depending on base unit & configuration On-Board SATA DOM Non volatile storage drive for booting capacity FF Interface Category dwpd (5y) order code E-part order code L-part 64GB DOM 6Gb/s boot 0,14 S26361-F5618-E64 S26361-F5618-L64 128GB DOM 6Gb/s boot 0,13 S26361-F5618-E128 S26361-F5618-L128 SATADOM is designed for use as a boot drive with the Endurance Spec. above. max. 1x per Server; connector located on Motherboard (please see folder "description"). Vmware is not supported. 2.5" (SFF) Hard drives Mixed configuration 2.5" HDD BC SAS/ SATA 7.2K with 2.5" HDD SAS 10K/ 15K not allowed HDD SAS 2.5" 7.2K (SFF) Enterprise Business critical with hot plug/hot replace tray capacity RPM Interface Cache sector order code E-part order code L-part 1TB Gb/s 128MB 512e S26361-F5573-E100 S26361-F5573-L100 2TB Gb/s 128MB 512e S26361-F5573-E200 S26361-F5573-L200 max. 8x - depending on base unit & configuration HDD SAS 2.5" (SFF) Enterprise Mission Critical with hot plug/hot replace tray Capacity RPM Interface Sector order code E-part order code L-part 300GB SAS 12Gb/s 512n S26361-F5550-E130 S26361-F5550-L GB SAS 12Gb/s 512n S26361-F5550-E160 S26361-F5550-L GB SAS 12Gb/s 512n S26361-F5550-E190 S26361-F5550-L TB SAS 12Gb/s 512n S26361-F5550-E112 S26361-F5550-L GB SAS 12Gb/s 512e S26361-F5543-E160 S26361-F5543-L GB SAS 12Gb/s 512e S26361-F5543-E190 S26361-F5543-L TB SAS 12Gb/s 512e S26361-F5543-E112 S26361-F5543-L TB SAS 12Gb/s 512e S26361-F5543-E118 S26361-F5543-L TB SAS 12Gb/s 512e as soon as available S26361-F5543-E124 S26361-F5543-L GB SAS 12Gb/s 512n S26361-F5531-E530 S26361-F5531-L GB SAS 12Gb/s 512n S26361-F5531-E545 S26361-F5531-L GB SAS 12Gb/s 512n S26361-F5531-E560 S26361-F5531-L560 max. 8x - depending on base unit & configuration. Mixed configuration 2.5" HDD BC SAS/ SATA 7.2K with 2.5" HDD SAS 10K/ 15K not allowed HDD SATA 2.5" 7.2K (SFF) Enterprise Business critical with hot plug/hot replace tray capacity RPM Interface Cache sector order code E-part order code L-part 1TB Gb/s 128MB 512n S26361-F3956-E100 S26361-F3956-L100 2TB Gb/s 128MB 512n S26361-F3956-E200 S26361-F3956-L200 1TB Gb/s 128MB 512e S26361-F3907-E100 S26361-F3907-L100 2TB Gb/s 128MB 512e S26361-F3907-E200 S26361-F3907-L200 max. 8x - depending on base unit & configuration G HD_SSD Page 13 of 21

14 G 3.5" SSD SSD SATA 3.5" (LFF) - 2.5" Enterprise SSD with 3.5" hot plug/hot replace tray capacity Formfactor Interface Category dwpd (5y) order code E-part order code L-part 240GB 3.5" (LFF) 6Gb/s read / write 3,6 S26361-F5673-E240 S26361-F5673-L GB 3.5" (LFF) 6Gb/s read / write 3,6 S26361-F5673-E480 S26361-F5673-L GB 3.5" (LFF) 6Gb/s read / write 3 S26361-F5589-E960 S26361-F5589-L TB 3.5" (LFF) 6Gb/s read / write 3 S26361-F5589-E192 S26361-F5589-L192 max. 4x - depending on configuration SSD SATA 3.5" Mixed Use S4600 (LFF) 2.5" SSD Enterprise with 3.5" hot plug/hot replace tray Capacity Formfactor Interface Endurance DWPD order code E-part order code L-part 240GB 3.5" (LFF) SATA 6Gb/s Mixed Use 3,1 as soon as available S26361-F5692-E240 S26361-F5692-L GB 3.5" (LFF) SATA 6Gb/s Mixed Use 3,3 as soon as available S26361-F5692-E480 S26361-F5692-L GB 3.5" (LFF) SATA 6Gb/s Mixed Use 3,0 as soon as available S26361-F5692-E960 S26361-F5692-L TB 3.5" (LFF) SATA 6Gb/s Mixed Use 3,0 as soon as available S26361-F5692-E192 S26361-F5692-L192 max. 4x - depending on configuration 3.5" (LFF) Hard drives HDD SAS 3.5" (LFF) 2.5" Enterprise HDD with 3.5" hot plug/hot replace tray Capacity RPM Interface Sector order code E-part order code L-part 300GB SAS 12Gb/s 512n S26361-F5568-E130 S26361-F5568-L GB SAS 12Gb/s 512n S26361-F5568-E160 S26361-F5568-L TB SAS 12Gb/s 512n S26361-F5568-E112 S26361-F5568-L TB SAS 12Gb/s 512e S26361-F5569-E118 S26361-F5569-L TB SAS 12Gb/s 512e as soon as available S26361-F5569-E124 S26361-F5569-L GB SAS 12Gb/s 512n S26361-F5532-E530 S26361-F5532-L GB SAS 12Gb/s 512n S26361-F5532-E545 S26361-F5532-L GB SAS 12Gb/s 512n S26361-F5532-E560 S26361-F5532-L560 2TB SAS 12Gb/s 512e S26361-F5571-E200 S26361-F5571-L200 4TB SAS 12Gb/s 512e S26361-F5571-E400 S26361-F5571-L400 6TB SAS 12Gb/s 512e S26361-F5571-E600 S26361-F5571-L600 8TB SAS 12Gb/s 512e S26361-F5571-E800 S26361-F5571-L800 10TB SAS 12Gb/s 512e S26361-F5571-E100 S26361-F5571-L100 12TB SAS 12Gb/s 512e as soon as available S26361-F5571-E120 S26361-F5571-L120 max. 4x - depending on configuration HDD SATA 3.5" 7.2K (LFF) business critical (Nearline SATA) with hot plug/hot replace tray Capacity RPM Interface Sector order code E-part order code L-part 500GB SATA 6Gb/s 512n S26361-F3950-E500 S26361-F3950-L500 1TB SATA 6Gb/s 512n S26361-F3950-E100 S26361-F3950-L100 2TB SATA 6Gb/s 512n S26361-F3815-E200 S26361-F3815-L200 4TB SATA 6Gb/s 512n S26361-F3815-E400 S26361-F3815-L400 4TB SATA 6Gb/s 512e not released for Japan/APAC S26361-F3904-E400 S26361-F3904-L400 6TB SATA 6Gb/s 512e S26361-F3904-E600 S26361-F3904-L600 8TB SATA 6Gb/s 512e S26361-F3904-E800 S26361-F3904-L800 10TB SATA 6Gb/s 512e S26361-F3904-E100 S26361-F3904-L100 12TB SATA 6Gb/s 512e as soon as available S26361-F3904-E120 S26361-F3904-L120 max. 4x - depending on configuration H HD_SSD Page 14 of 21

15 Chapter 11 - LAN Components H Networking Controller 1Gb Ethernet network components Max. 3x LAN Controller per System (configuration of different Contr. possible) 1Gb Ethernet controller with RJ45 interface (1000BASE-T) PLAN AP 1x1Gbit Cu Intel I210-T1 LP 3x 1 port, Intel S26361-F3852-E201 S26361-F3852-L501 PLAN CP 2x1Gbit Cu Intel I350-T2 LP 3x 2 port, Intel S26361-F4610-E202 S26361-F4610-L502 PLAN CP 2x1Gbit Cu Intel I350-T4 LP 3x 4 port, Intel S26361-F4610-E204 S26361-F4610-L504 max. 3 Controller per system 10Gb Ethernet network components 10Gb Ethernet controller with RJ45 interface (10GBASE-T) Eth Ctrl 2x10GBase-T PCIe x8 X540-T2 LP 2x 2 port NIC, Intel S26361-F3752-E202 S26361-F3752-L502 PLAN EP X550-T2 2x10GBASE-T LP 2x 2 port NIC, Intel S26361-F3948-E202 S26361-F3948-L502 PLAN EP OCe x 10GBase-T LP 2x 2 port NIC with RDMA, Emulex S26361-F5557-E201 S26361-F5557-L501 10Gb Ethernet controller with SFP+ interface (for SFP+ modules or twinax cables, Fujitsu / Intel based) Eth Ctrl 2x10Gbit PCIe x8 D2755 SFP+ LP PLAN EP X710-DA2 2x10Gb SFP+ LP 2x 2x 2 port NIC, Intel based 2 port NIC, Intel S26361-F3629-E202 S26361-F3640-E202 S26361-F3629-L502 S26361-F3640-L502 optional 10Gb SFP+ module with LC connector for Fujitsu / Intel based controller SFP+ Module MMF 10GbE LC 2x MMF / SR SFP+ module, up to 400m S26361-F3986-E3 S26361-F3986-L3 SFP+ Module SMF 10GbE LC 2x SMF / LR SFP+ module, up to 10km S26361-F3986-E4 S26361-F3986-L4 Twinax Anschlussplatz Primergy 2x virtual connector for twinax cables V:TWX CONNECTOR-PY SFP+ active Twinax Cable Fujitsu 2x customized cable length S26361-F3989-E600 see table at the SFP+ active Twinax Cable Brocade 2x (best fitting cable length is defined S26361-F3873-E500 botton of this page SFP+ passive Twinax Cable Cisco 2x during rack installation at the factory) S26361-F4571-E500 max. 2x SFP+ or Twinax Cable per controller 10Gb Ethernet controller with SFP+ interface (for SFP+ modules or twinax cables, Emulex) PLAN EP OCe x10Gb LP 2x 2 port NIC with RDMA, Emulex S26361-F5536-E202 S26361-F5536-L502 PCNA EP OCe x 10Gb LP 2x 2 port CNA with FCoE & RDMA, Emulex S26361-F5250-E201 S26361-F5250-L501 optional 10Gb SFP+ module with LC connector for Emulex controller PCNA SFP+ MMF Modul OCe x MMF / SR SFP+ module, up to 400m S26361-F5250-E110 S26361-F5250-E110 Twinax Anschlussplatz Primergy 2x virtual connector for twinax cables V:TWX CONNECTOR-PY SFP+ active Twinax Cable Fujitsu 2x customized cable length S26361-F3989-E600 see table at the SFP+ active Twinax Cable Brocade 2x (best fitting cable length is defined S26361-F3873-E500 botton of this page SFP+ passive Twinax Cable Cisco 2x during rack installation at the factory) S26361-F4571-E500 max. 2x SFP+ or Twinax Cable per controller max. 2 Controller per system LAN_FC Page 15 of 21

16 25/10Gb Ethernet network components 25/10Gb Ethernet controller with 2x SFP28 cages (requires Splitter DAC, twinax cables, or optical transceiver SFP+ modules) Dual speed support - supports 25Gbps and 10Gbps line rate per-port PLAN EP QL x25Gb LP 2x Dual Port NIC, RoCE RDMA, WS2016, Cavium S26361-F5622-E202 S26361-F5622-L502 Optional Cisco Ethernet Direct Attach Copper Cables (DACs) - not introduced by Fujitsu; available for purchase at Cisco Cisco DAC Splitter Cable 100G to 4X25G, 1x Cisco 100GBase QSFP to 4xSFP25G Passive, Cisco P/N: QSFP-4SFP25G-CU1M Cisco DAC Splitter Cable 100G to 4X25G, 1x Cisco 100GBase QSFP to 4xSFP25G Passive, Cisco P/N: QSFP-4SFP25G-CU2M Cisco DAC Splitter Cable 100G to 4X25G, 1x Cisco 100GBase QSFP to 4xSFP25G Passive, Cisco P/N: QSFP-4SFP25G-CU3M One Cisco DAC Splitter cable connects up to 4 25G ports, i.e. 2x PLAN EP QL45212 cards to a single Cisco 100G Switch Port. Optional 10Gb SFP+ Optical Transceivers with LC Connector, or Active or Passive Twinax Cables SFP+ SFP+ Transceiver Module MMF 10GbE LC 2x MMF / SR SFP+ module, up to 400m S26361-F3986-E3 S26361-F3986-L3 SFP+ Transceiver Module SMF 10GbE LC 2x SMF / LR SFP+ module, up to 10km S26361-F3986-E4 S26361-F3986-L4 virtual connector for twinax cables 2x virtual connector for twinax cables V:TWX CONNECTOR-PY Amphenol Active Twinax Cable SFP+ for 1 2x Amphenol 10G Active Twinax Cable, 2m S26361-F3989-E600 S26361-F3989 -L102 Amphenol Active Twinax Cable SFP+ for 1 2x Amphenol 10G Active Twinax Cable, 5m Customized Cable S26361-F3989 -L105 Amphenol Active Twinax Cable SFP+ for 1 2x Amphenol 10G Active Twinax Cable, 10m Length S26361-F3989 -L110 Brocade Active Twinax Cable SFP+ for 10G 2x Brocade 10G Active Twinax Cable, 1m S26361-F3873-E500 S26361-F3873-L501 Brocade Active Twinax Cable SFP+ for 10G 2x Brocade 10G Active Twinax Cable, 3m Customized Cable S26361-F3873-L503 Brocade Active Twinax Cable SFP+ for 10G 2x Brocade 10G Active Twinax Cable, 5m Length S26361-F3873-L505 Cisco Passive Twinax Cable SFP+ for 10G, 2x Cisco 10G Passive Twinax Cable, 1m S26361-F4571-E101 S26361-F4571-L101 Cisco Passive Twinax Cable SFP+ for 10G, 2x Cisco 10G Passive Twinax Cable, 3m S26361-F4571-E103 S26361-F4571-L103 Cisco Passive Twinax Cable SFP+ for 10G, 2x Cisco 10G Passive Twinax Cable, 5m S26361-F4571-E105 S26361-F4571-L105 Cisco Active Twinax Cable SFP+ for 10G, 7 2x Cisco 10G Active Twinax Cable, 7m S26361-F4571-E107 S26361-F4571-L107 Cisco Active Twinax Cable SFP+ for 10G, 1 2x Cisco 10G Active Twinax Cable, 10m S26361-F4571-E110 S26361-F4571-L110 Max. 2x SFP+ or Twinax Cable per controller. Customized Cable Length means: best fitting cable length is defined during rack installation at the factory. Max. 2 Controllers per system Network cables for later upgrade Fujitsu active SFP+ Twinax 10Gb cable SFP+ active Twinax Cable Fujitsu 2m SFP+ active Twinax Cable Fujitsu 5m SFP+ active Twinax Cable Fujitsu 10m Brocade active SFP+ Twinax 10Gb cable SFP+ active Twinax Cable Brocade 1m SFP+ active Twinax Cable Brocade 3m SFP+ active Twinax Cable Brocade 5m S26361-F3989-L102 S26361-F3989-L105 S26361-F3989-L110 S26361-F3873-L501 S26361-F3873-L503 S26361-F3873-L505 Cisco passive SFP+ Twinax 10Gb Ethernet SFP+ passive Twinax Cable Cisco 1m SFP+ passive Twinax Cable Cisco 3m SFP+ passive Twinax Cable Cisco 5m SFP+ active Twinax Cable Cisco 7m SFP+ active Twinax Cable Cisco 10m S26361-F4571-L101 S26361-F4571-L103 S26361-F4571-L105 S26361-F4571-L107 S26361-F4571-L110 Chapter 12 - Fibre Channel Controller LAN_FC Page 16 of 21

17 Chapter 12 - Fibre Channel Controller 8Gb Fibre Channel controller generation 4 with LC interface for 50µm optical cables (OM3 or OM4) FC Ctrl 8Gb/s 1 Kanal LPe1250 MMF LC LP 3x 1 port, low profile, Emulex S26361-F3961-E201 S26361-F3961-L201 FC Ctrl 8Gb/s 2 Kanal LPe12002 MMF LC LP 3x 2 port, low profile, Emulex S26361-F3961-E202 S26361-F3961-L202 FC Ctrl 8Gb/s 1 Kanal QLE2560 MMF LC LP 3x 1 port, low profile, Qlogic S26361-F3631-E201 S26361-F3631-L201 FC Ctrl 8Gb/s 2 Kanal QLE2562 MMF LC LP 3x 2 port, low profile, Qlogic S26361-F3631-E202 S26361-F3631-L202 16Gb Fibre Channel controller generation 5 with LC interface for 50µm optical cables (OM3 or OM4) PFC EP LPe x 16Gb LP 3x 1 port, low profile, Emulex S26361-F4994-E201 S26361-F4994-L501 PFC EP LPe x 16Gb LP 3x 2 port, low profile, Emulex S26361-F4994-E202 S26361-F4994-L502 PFC EP QLE2670 1x 16Gb LP 3x 1 port, low profile, Qlogic S26361-F5313-E201 S26361-F5313-L501 PFC EP QLE2672 2x 16Gb LP 3x 2 port, low profile, Qlogic S26361-F5313-E202 S26361-F5313-L502 16Gb Fibre Channel controller generation 6 with LC interface for 50µm optical cables (OM3 or OM4) PFC EP LPe x 16Gb Emulex LP 3x 1 port, low profile, Emulex S26361-F5596-E201 S26361-F5596-L501 PFC EP LPe x 16Gb Emulex LP 3x 2 port, low profile, Emulex S26361-F5596-E202 S26361-F5596-L502 PFC EP QLE2690 1x 16Gb LP 3x 1 port, low profile, Qlogic S26361-F5580-E201 S26361-F5580-L501 PFC EP QLE2692 2x 16Gb LP 3x 2 port, low profile, Qlogic S26361-F5580-E202 S26361-F5580-L502 max. 3 Controller per system (mixed configurations are supported) 32Gb Fibre Channel controller generation 6 with LC interface for 50µm optical cables (OM3 or OM4) PFC EP LPe x 32Gb LP 2x 1 port, low profile, Broadcom/Emulex S26361-F4044-E201 S26361-F4044-L501 PFC EP LPe x 32Gb LP 2x 2 port, low profile, Broadcom/Emulex S26361-F4044-E202 S26361-F4044-L502 I LAN_FC Page 17 of 21

18 Chapter 14 - Power supply unit, power cable, country specific options I S26113-F575-E13 S26113-F575-L13 450W platinum power supply unit 450W PSU module platinum 1st or 2nd PSU for redundancy. 94% efficiency V, 50-60Hz occupies hot plug PSU slot min. 1x / max. 2x per system S26113-F574-E13 S26113-F574-L13 800W platinum power supply unit 800W PSU module platinum 1st or 2nd PSU for redundancy. 94% efficiency V, 50-60Hz occupies hot plug PSU slot min. 1 / max. 2x per system S26113-F574-E99 Dummy module instead PSU Dummy module for closing the 2nd PSU hole, in case only 1 PSU is equipped This option will be closes hot plug PSU slot This option will be added automaticaly if only 1x PSU is chosen Power cord option for Rack Server, 4m, grey (1x per PSU) T26139-Y1968-E100 Powercord for rack, IEC 320 C14 connector T26139-Y1742-E10 USA, Canada, 1.8m, black T26139-Y3850-E10 no power cord S26361-F3301-E123 Certification for India! Only with "no powercord option" S26361-F3301-E120 Certification for China (CCC)! Only with "no powercord option" S26361-F1452-E100 Region Kit EMEA / APAC / India S26361-F1452-E130 Region Kit America S26361-F1452-E140 Region Kit Europe J PSU Page 18 of 21

19 Chapter 15 - Accessories J USB sticks (FOR PROJECTS ONLY) - no standard release ADATA USB 3.0 Flash Stick UE700 32GB ADATA USB 3.0 Flash Stick UE700 64GB S26391-F6048-L332 S26391-F6048-L364 USB Optical Disc Drive External Ultra Slim Portable DVD Writer (Hitachi-LG) S26341-F103-L142 K USB devices Page 19 of 21

20 Chapter 16 - others K S26361-F1790-E243 S26361-F1790-L244 irmc S4 advanced pack integrated remote Management controller activation key for graphical console redirection and remote media redirection S26361-F3776-E240 Cool-safe Advanced Thermal design 40 C enables the PRIMERGY Server to cope with temperatures from 5-40 in operating mode due to extended Fan settings this setting can be activated ex factory only S26361-F3776-E245 Cool-safe Advanced Thermal design 45 C enables the PRIMERGY Server to cope with temperatures from 5-45 in operating mode due to extended Fan settings this setting can be activated ex factory only S26361-F3552-E31 TPM 1.2 Module S26361-F5011-E10 S26361-F5011-L10 serial port (RS232) Not released for APAC and Japan. S26361-F3552-E32 S26361-F3552-L32 TPM 2.0 Module Not released for APAC and Japan. TPM upgrade only available for system serial numbers You would like to add some customer specific solutions? With our made4you service we fulfill any individual requirement and wish of our customers perfectly - e.g. > special hardware configurations, > staging services ex factory, > extended lifecycle management, > customer specific logos, component, > BIOS fixes and many more. For further information please contact us Fujitsu Portfolio Build on industry standards, Fujitsu offers a full portfolio of IT hardware and software products, services, solutions and cloud offering, ranging from clients to datacenter solutions and includes the broad stack of Business Solutions, as well as the full stack of Cloud offering. This allows customers to leverage from alternative sourcing and delivery models to increase their business agility and to improve their IT operation s reliability. Your Server is ready others Page 20 of 21

21 Date of change [dd.mm.yyyy] Folder / order code / description Name What has been changed / comment PRIMERGY RX2510 M2 Configurator Maridakis, Michail FIRST RELEASE RAID: PRAID EP400, EP420e, ASO Linne, Johannes corrections on lines for ASO and FBU, TFM RAID: PRAID EP420e,PSAS CP400e Linne, Johannes allow combination of external ctrl Independent/Performance Mem. Mode Maridakis, Michail Removed TPM Maridakis, Michail Removed S62361-F5580-E201 / L501 / -E202 / - L502 Freise, Peter added 16Gb Gen6 FC from Qlogic S62361-F5596-E201 / L501 / -E202 / - L502 Freise, Peter added 16Gb Gen6 FC from Emulex PRIMERGX RX2510 M2 base units HDD_SSD HDD_SSD Region kit EMEIA/APAC HDD_SSD Maridakis, Michail Karakas, Özcan Karakas, Özcan Maridakis, Michail Sasaki, Takayuki Minimum order quantity defined S26361-F5589-* SSD SATA 3DWPD added Read-intensive (0.3DWPD) SSDs removed S Replaced by Region Kit Europe. S26361-F5593-* SSD SATA 10DWPD added ODD Maridakis, Michail ODD options added S26361-F5580-xxxx Freise, Peter QLE269x finally released PCIe controller population options Maridakis, Michail Improved descriptions to precise internal/external connectivity options S26361-F5243-E4 S26361-F2735-E422/L422 S26113-F624-E10/L10 Seil, Fabian Seil, Fabian Maridakis, Michail added added RMK Added 48V PSU Seil, Fabian Memory page updated RAM S26341-F103-L140 Ruf, Klaus-Dieter Seil, Fabian Remark on 4GB (special release) changed to new USB Optical Disc Drive S26361-F5243-L110 S26361-F3552-E31/-E32/-L32 Maridakis, Michail Maridakis, Michail Corrected to S26361-F5243-L111 Added TPM module v.1.2 and v LAN_FC HD_SSD / S26361-F3904/5571-E800/100 Seil, Fabian Sudou, Tatsuya new Fibre Channel Controller added added HD_SSD / 8/10TB HDDs Sudou, Tatsuya Info-Text added RAM Seil, Fabian memory speed corrected HD_SSD / S26361-F5618-* Sudou, Tatsuya added S26361-F5243-E4 S26113-F624-E10 48V DC PSU Seil, Fabian Linne, Johannes comment added Removed base section description HD_SSD / Note / S26361-F5618-* Maridakis, Michail Sudou, Tatsuya Added UFM updated / Endurance updated SFF Basue Units S26361-F3847-E204 Maridakis, Michail Linne, Johannes Added SFF base units and upgrade option added EP420e for SafeStore HD_SSD Sudou, Tatsuya SFF drives added USB Devices Maridakis, Michail New ext. ODD added RAM HD_SSD / Note / F5589-E120 / F5522- Seil, Fabian Sudou, Tatsuya max. memory capacity corrected updated / removed LAN Lösch, Ulrich Yellow color - removed LAN RAID Lösch, Ulrich Seil, Fabian PLAN EP QL x25Gb - Added descriptions of FBU options changed HD_SSD / F5673/F5675-* Sudou, Tatsuya added HD_SSD / S26361-F5593-* Sudou, Tatsuya removed (EOL) RAID Spörl, Anna note in Z97S4 changed HD_SSD / F5588/F5589-E240/E480 Sudou, Tatsuya removed (EOL) HD_SSD / F5694/F5692-* / F5543/F5569- Sudou, Tatsuya / F5571/F3904-E120 added HD_SSD / exclusions for 8/10TB HDDs and Sudou, Tatsuya removed change_history Page 21 of 21