HME Retail CHF Pricelist November 2015

Transcription

1 HME Retail Pricelist Price Price ANALOG PARTYLINE ANALOG PARTY LINE INTERCOM AND AUDIO PRODUCTS ENCORE MAIN STATIONS / POWER SUPPLIES CS Ch. portable headset main station: Encore two-channel portable headset main station. Built-in 1-amp (2-amp peak) power supply. Three XLR-3 Male connectors for each partyline A and B, one XLR-3 female for Program Audio in and one XLR-3 Male for Stage Announce out on the rear panel. 1' ' MS Ch. headset/speaker main station: Encore two-channel headset/speaker main station. Built-in 1-amp (2-amp peak) power supply, 1RU rack mount. Three XLR-3 Male connectors for each partyline A and B, one XLR-3 female for Program Audio in and one XLR-3 Male for Stage Announce out on the rear panel. Jack for hot mic out. 1' ' MS Ch. headset/speaker main station: Encore four-channel headset/speaker main station. Built-in 1-amp (2-amp peak) power supply, 2RU rack mount. Four pairs of XLR-3 Male connectors for partylines A-D, one XLR-3 female for Program Audio in and one XLR-3 Male for Stage Announce out on the rear panel. Jack for hot mic out. 2' ' SB Ch. switchboard main station: Encore four-channel switchboard main station. 5 positions X 10 outputs assignment matrix, no speaker. Built-in 1-amp (2-amp peak) power supply, 2RU rack mount. One XLR-3 Male connectors for each partyline A-D; one XLR-3 Male per yline output 1-10; one XLR-3 female for Program Audio in and one XLR-3 Male for Stage Announce out on the rear panel. Jacks for hot mic out and external loudspeaker. 3' ' PS Ch. rack mount power supply: Encore two-channel one-amp, (two-amp peak), 1RU rack mount, universal power supply. Two channels X three intercom jacks. One A/B selectable jack and one program input. Three XLR-3 Male connectors for each partyline A and B, and one XLR-3 female for Program Audio in on the rear panel. 1' ' PS Ch. rack mount power supply: Encore four-channel one-amp, two-amp peak, 1RU rack mount system power supply. Four channels X two intercom jacks. One program input, universal power supply. Two XLR-3 Male connectors for each partyline A -D, and one XLR-3 female for Program Audio in on the rear panel. 1' ' PK-7 Single-Channel 0.4-amp portable power supply: Encore single-channel 0.4-amp portable power supply module. Includes universal power supply. Three XLR-3 Male connectors for partylines on the rear panel ENCORE BELTPACKS AND HEADSET STATIONS RS-701 Single-Channel standard beltpack: Encore single-channel standard beltpack. Four-pin male headset connector and three-pin female/male loop through intercom line connectors RS Ch. dual listen monaural beltpack: Encore two-channel standard dual listen monaural beltpack four-pin male headset connector. Six-pin female/male loop through intercom line connectors. Requires YC-36 adapter to connect with standard three-pin cabling RS Ch. TW dual listen monaural beltpack: Encore two-channel/three-pin dual listen monaural beltpack four-pin male headset connector. Threepin female/male loop through intercom line connectors. Requires a TWC VPC-1 V-Pack programming software for 600 series beltpack: Encore V-Pack configuration software for 600-series beltpack (Windows-based). Includes a DB-9 female to 3.5 mm/1/8" jack cable to connect beltpack to a PC serial port. Documentation included HB Ch. flush-mount headset station: Encore two-channel selectable flush-mount headset station. Mounts in console or standard two-gang electrical box. Includes a Four-pin male headset connector HB Ch. flush-mount headset station: Encore four-channel selectable flush-mount headset station. Mounts in console or standard two-gang electrical box. Includes a Four-pin male headset connector RM Ch. remote station rack mount: Encore two-channel 1RU remote station rack mount with internal speaker and ports for gooseneck microphone and/or headset. Must be used in conjunction with a power supply such as a PS-702 or MS ' ' RM Ch. remote station rack mount: Encore four-channel 2RU remote station rack mount with internal speaker and ports for gooseneck microphone and/or headset. Must be used in conjunction with a power supply such as a PS-704 or MS ' '218.70

2 HME Retail Pricelist Price Price KB Ch. flush-mount headset/speaker station: Encore two-channel selectable flush-mount headset/speaker station. Mounts in four-gang box, console, or V-Box accessory enclosure 21.6cm/8.25" X 11.4cm/4.5". Includes a Four-pin male headset connector KB-702GM 2 Ch. flush-mount headset/speaker GN mic: Encore two-channel selectable flush-mount headset/speaker station, gooseneck microphone jack and VOX. Mounts in four-gang box, console, or V-Box accessory enclosure 21.6cm/8.25" X 11.4cm/4.5". Includes a Four-pin male headset connector KB-701 Single-Channel flush-mount PTT speaker station: Encore single-channel half-duplex flush-mount push-to-talk speaker/microphone station mounts In fourgang box, console, or accessory enclosure 21.6cm/8.25" x 11.4cm/4.5" V-BOX ENCORE SYSTEM INTERFACES EB7-4W Wedge shaped enclosure for KB stations: Encore portable wedge-shaped enclosure for angled or vertical mounting. Desktop/wall-mount enclosure for KB-701, KB-702GM and KB-702 stations. 4-wire adapter board for KB/HB: Encore plug-in 4-wire adapter board for KB-701/702 and HB-702/704 stations. (No PSU provided) Please note this board requires a Z power supply EF-701M 4-wire interface with call signal: Encore four-wire interface with call signal. Interfaces matrix to a single channel of standard or TW party-line. 1' ' IF4W4 4 Ch., 4-wire interface: Encore four-channel 3/4-wire camera interface. 1RU rack mount provides four discrete Clear-Com to 3- wire or 4-wire interface circuits. Can be used to connect to four different two-wire partyline channels or a single partyline channel with four 4-wire connections. 1' ' TW-12C CC/RTS system interface: Clear-Com/RTS system interface - 1RU rack mount. Interface a single intercom channel. Clear-Com to Clear-Com or Clear-Com to RTS systems. 1' ' TW-47 2-way radio interface: Clear-Com/RTS two-way radio interface connects Clear-Com or RTS to most two-way radios. A custom interface cable will be required and is not provided ENCORE IFB SYSTEM INTERFACES PIC-4704 IFB central controller: Encore IFB main station 1RU rack mount. Requires MA-704/AX-704 controllers and IC-25-6 cable or similar and power supply such as the PS ' ' MA-704 IFB control panel mic jack: Encore IFB control panel with 6.35mm/1/4" microphone jack, four individual talent buttons and "All" talk button. For use with the PIC See the optional CEP-RK console for rack mounting. 1' ' AX-704 IFB expansion control panel: Encore IFB expansion control panel with four individual talent buttons. For use with the PIC-4704 and MA-704. See the optional CEP-RK console for rack mounting. 1' ' TR-50 Monaural IFB talent receiver: Wired monaural IFB talent receiver 3.5mm/1/8" mini jack includes TS-1. Requires a Clear-Com PSU. See also CC-010A earpiece CEP-RK Rack kit for MA-704 and AX-704: 1RU rack mount kit for MA-704 and AX-704 control panels. Holds up to three IFB control panels TS-1 Monaural talent earphone: Monaural talent earphone. Monaural IFB talent earphone. Plugs into TR-50 and wireless IFB receivers YC-66 Y adapter for IFB systems: Six-pin Y adapter for IFB systems. Two six-pin female connectors wired to one six-pin male QUE-COM INTERCOM COMPONENTS SMQ-1 Que-Com single-ear headset/beltpack: Que-Com single-ear headset/beltpack combination SP-3 3-way intercom line splitter: Three-way intercom line splitter. One three-pin female and three three-pin male XLR-type connectors

3 HME Retail Pricelist Price Price ENCORE BROADCAST AUDIO PRODUCTS AB-120 Commentator/translation console: On-air announcer box, no 4-wire interface, no 48V phantom power. 2' ' Z Spare AB-120 PSU: Spare AB-120 PSU ENCORE PROGRAMMABLE SOURCE-ASSIGNMENT PANEL RCS x24 Ch. program station assignment panel: Eight 24-channel programmable station-assignment panel. Stores 14 presets and expandable up to 15 sources and 72 destinations. Assigns 24 stations or groups to one of eight party-line channels. 2RU rack mount. 4' ' ENCORE INTERCONNECT CABLES AND CONNECTORS IC-25 Intercom cable 25 feet: 7.5m/25ft intercom cable - three-pin XLR-type IC-50 Intercom cable 50 feet: 15.2m/50ft intercom cable - three-pin XLR-type IC-100 Intercom cable 100 feet: 30.4m/100ft intercom cable - three-pin XLR-type IC-25-2P 2 pairs superflex intercom cable 25 feet: Two pairs 7.6m/25ft intercom cable - six-pin XLR-type for use with RS-702 and RS-602 beltpacks IC-50-2P 2 pairs superflex intercom cable 50 feet: Two pairs 15.2m/50ft intercom cable - six-pin XLR-type for use with RS-702 and RS-602 beltpacks IC-100-2P 2 pairs superflex intercom cable 100 feet: Two pairs 30.4m/100ft intercom cable - six-pin XLR-type for use with RS-702 and RS-602 beltpacks IC pairs superflex intercom cable 25 feet: Four pairs 7.6m/25ft intercom cable - six-pin XLR-type required to connect PIC-4704 to MA-704 and AX IC pairs superflex intercom cable 50 feet: Four pairs 15.2m/50ft intercom cable - six-pin XLR-type required to connect PIC-4704 to MA-704 and AX IC pairs superflex intercom cable 100 feet: Four pairs 30.4m/100ft intercom cable - six-pin XLR-type required to connect PIC-4704 to MA-704 and AX ENCORE SYSTEM ACCESSORIES FL-7 Call signal flasher: Encore call signal flasher provides adjustable visual and/or audible indication of a call signal WP-2 2 Ch. selectable intercom outlet: Encore channel selectable intercom outlet wall plate. Three-pin male connector and channel select switch on a single-gang wall plate WP-6 2 Ch. 6-pin intercom outlet: Two-channel six-pin intercom outlet wall plate six-pin male connector on a single-gang wall plate for RS YC-36 2 Ch. beltpack adapter: Three-pin to six-pin adapter combines two single-channel three-pin cables into a single two-channel six-pin connector for use with RS-702 and RS-602 beltpacks TWC-701 TW adaptor module: Two-channel/three-pin XLR adapter module. Combines two intercom channels onto a single three-pin cable for use with RS-703 and RS-603 beltpacks. Connect up to fifteen RS-703 beltpacks to TWC-701 output MT-701 Isolator PCB for PL interface: Isolator circuit box for party-line intercom systems. Electrically isolates ground, power and signaling between two systems

4 HME Retail Pricelist Price Price GM-9 9 inch plug-in GN mic: 22.9cm/9" plug-in gooseneck microphone for party-line stations, i-series and ICS panels GM inch plug-in GN mic: 45.8cm/18" plug-in gooseneck microphone for party-line stations, i-series and ICS panels DIGITAL NETWORK PARTYLINE HELIXNET DIGITAL NETWORKED PARTYLINE HelixNet digital 4 Ch. headset/speaker main station: HelixNet digital four-channel headset/speaker main station - supports up to 20 HBP-2X beltpacks. HMS-4X Three rear panel expansion bays accept up to three (optional) interface modules. Uses optional 110/340 series gooseneck microphones. High-contrast OLED display per channel. HMS-24-UG Allows HMS-4X HelixNet Main Station already running HelixNet 3.0 firmware to expand the channels on the main station from 12 to 24. 6' ' HBP-2X HelixNet digital 2 Ch. dual listen monaural beltpack: HelixNet digital two-channel standard dual listen monaural beltpack with display and four-pin male headset connector. Three-pin female/male loop through intercom line connectors. High-contrast OLED display. 1' ' HBP-2XS HelixNet digital 2 Ch. dual listen beltpack: HelixNet digital two-channel standard dual listen beltpack with display and five-pin female headset connector. Three-pin female/male loop through intercom line connectors. High-contrast OLED display. 1' ' HLI-4W2 HelixNet 4-wire module: 4-wire interface module. Dual channel 4-wire interface with transformer balancing. 1' ' HLI-2W2 HelixNet 2-wire module: 2-wire Clear-Com/RTS dual party-line interface module. Does not power the party-lines attached to HLI-2W2 modules. These require Encore master station PSUs such as the PS-702 or MS-702 or RTS equivalent power supply. 1' ' HLI-ET2 HLI-FBS HLI-MMFO HelixNet Ethernet module: Ethernet interface module. Dual channel Ethernet for LAN connectivity. HelixNet Fiber module: Fiber interface module. The HLI-FBS Fiber Linking Module provides a daisy-chain fiber interface to connect to other HelixNet Main Stations. With the Fiber Modules, Main stations share partyline channels and program audio, and make them available to any station and beltpack on the linked system. Fiber Modules can be mixed with Ethernet Modules in the same network. The HLI-FBS comes with one SFP LC duplex Single Mode transceiver, (see sales options for HLI- MMFO and HLI-SMFO). HelixNet Fiber MM TxVr: One Multi-Mode transceiver for the HelixNet HLI-FBS fiber module. The HLI-FBS fiber module accepts two SFP transceivers and comes with one with SM transceiver already fitted. The HLI-FBS module can mix the fitted default Single Mode transceiver with one of these Multi-Mode transceivers for two different fiber links HLI-SMFO HelixNet Fiber SM TxVr: One Single-Mode transceiver for the HelixNet HLI-FBS fiber module. The HLI-FBS fiber module takes two SFP transceivers and comes with one SM transceiver already fitted. The HLI-FBS module can house two fiber transceivers when the module is in the middle of chained fiber link with other HLI-FBS modules either side HRM-4X HelixNet Remote Station: HelixNet digital four-channel headset/speaker remote station. Powered though single screened twisted pair PL cable, PoE or external wall AC adapter. Uses optional 110/340 series gooseneck microphones. High-contrast OLED display per channel. 3' ' HKB-2X HelixNet Speaker Station: HelixNet digital two-channel headset/speaker wall station. Powered though single screened twisted pair PL cable, PoE or external wall AC adapter (supplied with the S-MOUNT). Uses optional 110/340 series gooseneck microphones. High-contrast OLED display per channel. Can be fitted into a 4 gang US standard wall plate or mounted in the S-Mount wall and desktop mount. 2' ' S-MOUNT HelixNet Wall/Desk Mount: HelixNet desktop or wall mounting kit for the HKB-2X. Comes with an AC power adapter Z Spare HelixNet Main Station PSU Clip: HelixNet Main Station Replacement PSU Clip G026 Spare HelixNet AC In-line PSU (Mains cable not included): HelixNet Replacement AC In-line PSU (Mains cable not included)

5 HME Retail Pricelist Price Price 453G025 Spare HelixNet Speaker Station AC Wall Wart PSU: HelixNet Speaker Station Replacement AC Wall Wart PSU / mm standard length GN mic: Standard length microphone - gooseneck 34cm/12", for use with HelixNet and V-Series / mm short GN mic: Short microphone - gooseneck 10cm/4", for use with HelixNet and V-Series / mm long GN mic: Long microphone - extended gooseneck 49cm/19", for use with HelixNet and V-Series WIRELESS ANALOG WIRELESS WBS-670 & WBS-680 FREQUENCY AGILE UHF WIRELESS INTERCOM SYSTEMS WBS BASE STATIONS WBS-670/A2 Single-Channel wireless UHF base station, band A2: Single-channel frequency-agile UHF wireless intercom base station band A2. Tx: MHz Rx: MHz. 7' ' WBS-670/B4 Single-Channel wireless UHF base station, band B4: Single-channel frequency-agile UHF wireless intercom base station band B4. Tx: MHz Rx: MHz. 7' ' WBS-680/A2 2 Ch. wireless UHF base station, band A2: Two-channel frequency-agile UHF wireless intercom base station band A2. Tx: MHz Rx: MHz. 9' ' WBS-680/B4 2 Ch. wireless UHF base station, band B4: Two-channel frequency-agile UHF wireless intercom base station band B4. Tx: MHz Rx: MHz. 9' ' WBS-680/E88 2 Ch. wireless UHF base station, band E88: Two-channel frequency-agile UHF wireless intercom base station band E88. Tx: MHz Rx: MHz. 9' ' WBS TRANSCEIVER BELTPACKS WTR-670/A2 Single-Channel wireless UHF transceiver, band A2: Single-channel frequency-agile UHF wireless intercom beltpack. Tx: MHz Rx: MHz. 2' ' WTR-670/B4 Single-Channel wireless UHF transceiver, band B4: Single-channel frequency-agile UHF wireless intercom beltpack. Tx: MHz Rx: MHz. 2' ' WTR-680/A2 2 Ch. wireless UHF transceiver, band A2: Two-channel frequency-agile UHF wireless intercom beltpack. Tx: MHz Rx: MHz. 2' ' WTR-680/B4 2 Ch. wireless UHF transceiver, band B4: Two-channel frequency-agile UHF wireless intercom beltpack. Tx: MHz Rx: MHz. 2' ' WTR-680/E88 2 Ch. wireless UHF transceiver, band E88: Two-channel frequency-agile UHF wireless intercom beltpack. Tx: MHz Rx: MHz. 2' ' WBS WIRELESS ACCESSORIES WTR-BAT Rechargeable battery pack WTR-670/680: Rechargeable battery pack for WTR-670 or WTR-680 beltpack WTR4C-E 4-bay charger for WTR-BAT Euro: 50/60Hz power supply including Euro AC connector battery charger for four WTR-BAT rechargeable batteries, 220V and four WTR-BAT rechargeable batteries. 2' ' AN-685/A AN-685/B AN-685/C AN-685/D Spare WBS beltpack Antenna WTR-670/ MHz: Replacement Flex Antenna WTR-670/ MHz Spare WBS beltpack Antenna WTR-670/ MHz: Replacement Flex Antenna WTR-670/ MHz Spare WBS beltpack Antenna WTR-670/ MHz: Replacement Flex Antenna WTR-670/ MHz Spare WBS beltpack Antenna WTR-670/ MHz: Replacement Flex Antenna WTR-670/ MHz

6 HME Retail Pricelist Price Price AN-685/E AND-680-BW AND-680-GW AND-680-RW AND-680-YW AN-685/F DIGITAL WIRELESS FREESPEAK II (1.9GHz) FSII-BASE FSII-BP19-X4-EU FSII-BP19-X5-EU FSII-BP19-X7-EU Spare WBS beltpack Antenna WTR-670/ MHz: Replacement Flex Antenna WTR-670/ MHz Spare WBS Base station Antenna WBS-670/ MHz (Blue & White): Replacement Flexible 1/2 Wave Dipole Antenna WBS-670/ MHz (Blue & White) Spare WBS Base station Antenna WBS-670/ MHz (Green & White): Replacement Flexible 1/2 Wave Dipole Antenna WBS-670/ MHz (Green & White) Spare WBS Base station Antenna WBS-670/ MHz (Red & White): Replacement Flexible 1/2 Wave Dipole Antenna WBS-670/ MHz (Red & White) Spare WBS Base station Antenna WBS-670/ MHz (Yellow & White): Replacement Flexible 1/2 Wave Dipole Antenna WBS-670/ MHz (Yellow & White) Spare WBS beltpack Antenna WTR-670/ MHz: Replacement Flex Antenna WTR-670/ MHz FreeSpeak II Digital wireless base station: FreeSpeak II Digital license-free wireless base station. Supports up to 20 Beltpacks and 10 antennas. (Two antennas can connect to the base station directly or up to 10 antennas can be connected by using two x PD2203 splitters) The base station has connections for two party-lines and four 4-wires plus a dedicated SA output and dedicated program audio input. FreeSpeak II digital wireless BP EU: Digital wireless beltpack including four talk and listen buttons with integral crosspoint level rotary controls and answerback and menu key. LED level and call signalization and OLED menu. Includes XLR-4M headset connector, USB DC charging connections, belt clips, shoulder strap, BAT60 rechargeable Lithium Ion battery and single AC USB charger part 453G029. CE marked. Approved for use in the EU. FreeSpeak II digital wireless BP X5 EU: Digital wireless beltpack including four talk and listen buttons with integral crosspoint level rotary controls and answerback and menu key. LED level and call signalization and OLED menu. Includes XLR-5F headset connector, USB DC charging connections, belt clips, shoulder strap, BAT60 rechargeable Lithium Ion battery and single AC USB charger part 453G029. CE marked. Approved for use FreeSpeak in the EU. II digital wireless BP X7 US: Digital wireless beltpack including four talk and listen buttons with integral crosspoint level rotary controls and answerback and menu key. LED level and call signalization and OLED menu. Includes XLR-7M headset connector, USB DC charging connections, belt clips, shoulder strap, BAT60 rechargeable Lithium Ion battery and single AC USB charger part 453G029. CE marked. Approved for use in the EU ' ' ' ' ' ' ' ' FSII-TCVR-19-EU PD2203 FREESPEAK II-24 (2.4GHz) FreeSpeak II active antenna EU: Active antenna powered either locally or from the matrix CAT5 connection. One antenna supports up to five FreeSpeak II beltpacks. More antennas needed if roaming or more beltpack support is required. Antenna splitter: Antenna splitter box. Provides five antenna feeds from one antenna port on the FSII-BASE station or Matrix Integra rear card. Including PSU. 2' ' ' ' FSII-BP24-X4-EU FreeSpeak II 24 digital wireless BP EU: 2.4 GHz Digital wireless beltpack including four talk and listen buttons with integral crosspoint level rotary controls and answerback and menu key. LED level and call signalization and OLED menu. Includes XLR-4M headset connector, USB DC charging connections, belt clips, shoulder strap, BAT60 rechargeable Lithium Ion battery and single AC USB charger part 453G029. CE marked. Approved for use in the EU. 2' ' FSII-BP24-X5-EU FreeSpeak II 24 digital wireless BP X5 EU: 2.4 GHz Digital wireless beltpack including four talk and listen buttons with integral crosspoint level rotary controls and answerback and menu key. LED level and call signalization and OLED menu. Includes XLR-5F headset connector, USB DC charging connections, belt clips, shoulder strap, BAT60 rechargeable Lithium Ion battery and single AC USB charger part 453G029. CE marked. Approved for use in the EU. 2' ' FSII-TCVR-24-EU FreeSpeak II 2.4 GHz active antenna EU: Active antenna powered either locally or from the matrix CAT5 connection. One antenna supports up to five FreeSpeak II beltpacks. More antennas needed if roaming or more beltpack support is required. Includes AC PSU adapter part 453G023. Approved for use in the EU. 2' ' FREESPEAK II ACCESSORIES FSII-BP-USB-CHRGR FreeSpeak II BP USB Charger: Spare FreeSpeak II Beltpack USB AC Charger with international plug kit (# 453G029) AC60 FreeSpeak II 5 way charger: FreeSpeak II 5 bay drop in beltpack charger and battery charger unit. Comes with AC adapter part # 453G AC60-W-MOUNT AC60 Wall bracket kit: AC60 metal wall bracket to support the FreeSpeak II 5 way drop-in charger

7 HME Retail Pricelist Price Price BAT60 Spare FreeSpeak II Battery: Spare FreeSpeak II beltpack spare Li-ion battery G023 Spare FreeSpeak II Antenna AC adapter: Spare FreeSpeak II Antenna in-line AC adapter G008-1 Spare AC60 AC adapter: Spare FreeSpeak II AC60 charger in-line AC adapter Legacy FREESPEAK / CELLCOM (1.9GHz) (Now replaced by FreeSpeak II see above) PD2203 Antenna splitter: Antenna splitter box. Provides five antenna feeds from one antenna port on the FreeSpeak/Cellcom base station or Matrix Integra rear card. Including PSU. 2' ' FREESPEAK/CELLCOM ACCESSORIES Z Spare FreeSpeak or CellCom Beltpack Charging PSU: Universal Input 24V 1.5A 1.65mm Jack PSU for FreeSpeak or CellCom Beltpack Charging CON5001SMAZ Spare FreeSpeak or CellCom Antenna: CellCom/FreeSpeak Replacement Spare Aerial for CEL-TA (FCC) and PD2201 Antenna (Currently Shipped with all Active Antennas) HME DX100, DX121, DX200 AND DX210 COMMUNICATORS CZ-WH220 WH220 wireless headset: Two-channel all-in-one lightweight wireless headset with 2 BAT50 batteries. For use with the DX210, DX200, DX121and DX100 base stations. Uses AC50 battery charger. 1' ' CZ12013 BP200 beltpack w/hs15 headset, EU Version: Beltpack with 2 BAT41 batteries, pouch, CC-15-MD4 single ear noise canceling headset 1' ' CZ12014 BP200 beltpack without headset, EU Version: Beltpack with 2 BAT41 batteries, pouch, EU Version for countries that require CE mark. 1' ' CZ12015 BP210 beltpack without headset, EU Version: Two-Channel Beltpack with 2 BAT41 batteries and pouch. For use with the DX210 base station. EU Version for countries that require CE mark. 1' ' HME DX300ES COMMUNICATORS (2.4GHz) WH301 all-in-one wireless headset: CZ-WH301 All-In-One Wireless Headset with 2 BAT50 batteries, MB300ES base station only. Uses AC50 battery charger CZ12017 BP300 beltpack & MB300ES base, EU Version: Beltpack with 1 BAT41 battery, and pouch. EU Version for countries that require CE mark HME DX410 WIDEBAND (2.4GHz) CZ-BS410-EU BS410 base station: DX410 wideband 7KHz, 2 channel base station w/2 antennas. 115/230 VAC power supply, includes power cord. 6' ' CZ-BP410 BP410 belt pack: DX410 wideband 7KHz two channel belt pack with pouch, and 2 BAT50 batteries, for use with DX410 base station. 1' ' CZ-WH410 WH410 wireless headset: DX410 wideband 7KHz, two-channel all-in-one lightweight wireless headset with 2 BAT50 batteries, for use with DX410 base station 1' ' CZ-DX4104-UP-EU CZ-BAT50 CZ-AC50-WW EU 4-Up DX410 belt pack system w/ CC-15 headsets: DX410 wideband 7KHz, 2 channel ETSI base station w/2 antennas. 115/230 VAC power supply, includes power cord. 4 BP410 belt packs with 8 AC50 batteries; 5 CC-15-MD4 single ear noise canceling headsets, AC50 Battery Charger; with, US, UK, Europe, and Australian plugs, 100/240 VAC, power supply. BAT50 rechargeable battery: Battery, Li-ion rechargeable, for BP410, WH410, WH220, WH301 AC50 battery charger world-wide kit: 4-port quick charger with power supply with, US, UK, Europe, and Australian plugs, 100/240 VAC, for BAT50 batteries. 13' ' HME DX SERIES BASESTATIONS (2.4GHz) CZ12020 MB100 base station, EU Version: Base station with 115/230VAC power supply, 115VAC power cord, base battery sled, 2 antennas, and manual. EU Version for countries that require CE mark. 1' '152.50

8 HME Retail Pricelist Price Price CZ12027 BS121 base station, EU Version: Base station with HS-XLR4F Interface cable, 115/230VAC power supply, 115VAC power cord, 2 antennas, and manual. EU Version for countries that require CE mark. 2' ' CZ12028 BS200 base station without headset, EU Version: License-free base station with 115/230VAC power supply, 115VAC power cord, 2 antennas, and manual. EU Version for countries that require CE mark. 4' ' CZ12029 BS210 base station without headset, EU Version: DX210 license-free base station w/2 antennas. 115/230 VAC power supply. Includes 115 VAC power cord and manual. 5' ' CZ12030 MB300ES base station, EU Version: License-free base station with 115/230VAC power supply, 115VAC power cord, two AA battery sleds, two antennas, interconnect cable, and manual. EU Version for countries that require CE mark. 4' ' ACCESSORIES HEADSETS AND ACCESSORIES CC-300-X4 Single-ear standard HS XLR-4F: Single enclosed ear headset with superior audio quality and on/ off switch in gooseneck microphone boom, includes HS-ES ear sock and headset bag - field removable four-pin female XLR for standard Clear-Com connection CC-400-X4 Double-ear standard HS XLR-4F: Double enclosed ear headset with superior audio quality and on/ off switch in gooseneck microphone boom includes HS-ES ear socks and headset bag- field removable four-pin female XLR for standard Clear-Com connection CC-300-Y4 Single-ear standard HS XLR-4M: Single enclosed ear headset with superior audio quality and on/ off switch in gooseneck microphone boom, includes HS-ES ear sock and headset bag - field removable four-pin male XLR for RTS compatible connection CC-400-Y4 Double-ear standard HS XLR-4M: Double enclosed ear headset with superior audio quality and on/ off switch in gooseneck microphone boom includes HS-ES ear socks and headset bag- field removable four-pin male XLR for RTS compatible connection CC-300-X5 Single-ear standard HS XLR-5M: Single enclosed ear headset with superior audio quality and on/ off switch in gooseneck microphone boom includes HS-ES ear sock and headset bag - field removable five-pin male XLR CC-400-X5 Double-ear standard HS XLR-5M: Double enclosed ear headset with superior audio quality and on/ off switch in gooseneck microphone boom includes HS-ES ear socks and headset bag - field removable five-pin male XLR CC-300-X6 Single-ear standard HS XLR-6M: Single enclosed ear headset with superior audio quality and on/ off switch in gooseneck microphone boom includes HS-ES ear sock and headset bag - field removable six pin male XLR CC-400-X6 Double-ear standard HS XLR-6M: Double enclosed ear headset with superior audio quality and on/ off switch in gooseneck microphone boom includes HS-ES ear socks and headset bag - field removable six-pin male XLR CC-300-X7 Single-ear standard HS XLR-7F: Single enclosed ear headset with superior audio quality and on/ off switch in goose neck microphone boom includes HS-ES ear sock and headset bag - seven-pin female XLR CC-400-X7 Double-ear standard HS XLR-7F: Double enclosed ear headset with superior audio quality and on/ off switch in gooseneck microphone boom includes HS-ES ear socks and headset bag - field removable seven-pin female XLR CC-300-Y5 Single-ear standard HS XLR-5F: Single enclosed ear headset with superior audio quality and on/ off switch in gooseneck microphone boom includes HS-ES ear sock and headset bag - field removable five-pin female XLR CC-400-Y5 Double-ear standard HS XLR-5F: Double enclosed ear headset with superior audio quality and on/ off switch in gooseneck microphone boom includes HS-ES ear socks and headset bag field removable five-pin female XLR CC-300-B6 Single-ear standard HS non-terminated: Single enclosed ear headset with superior audio quality and on/ off switch in gooseneck microphone boom includes HS-ES ear sock and headset bag - non-terminated (bare wires)

9 HME Retail Pricelist Price Price CC-400-B6 Double-ear standard HS non-terminated: Double enclosed ear headset with superior audio quality and on/ off switch in gooseneck microphone boom includes HS-ES ear socks and headset bag- non-terminated (bare wires) CC-010A IFB Ear Set (mini-jack): IFB Ear Set Includes Audio Driver, Coiled Acoustic Ear tube with Clothing Clip, 5 Ft (1.5m) cable with ⅛" (3.5mm) Straight Mini-jack Connector. Replaces CC CC-25 Single-ear light headset (mini-jack): Single open ear lightweight around-the-ear mounted headset. Including 2.5mm/0.1" mini-jack for use with RS-600-Series Beltpacks only CC-26K-X5 Single-ear light headset XLR-5M: Single open ear lightweight headset - five-pin male XLR CC-26K-X4 Single-ear light headset XLR-4F: Single open ear lightweight headset - four-pin female XLR for standard Clear-Com connection CC-27 Wrap-around light headset XLR-4F: Single ear bud, wrap around rear worn headset - four-pin female XLR for standard Clear-Com connection CC-40 Single-ear economy headset XLR-4F: Single enclosed ear economy headset - four-pin female XLR for standard Clear-Com connection. Optional ear sock covers (ES-1) are recommended CC-60 Double-ear economy headset XLR-4F: Double enclosed ear economy headset - four-pin female XLR for standard Clear-Com connection. Optional ear sock covers (ES-1) are recommended PT-7 Push-to-talk handheld mic XLR-4F: Push-to-talk handheld microphone - four-pin female XLR for standard Clear-Com connection HS-6 HME DX SERIES HEADSETS CZ11450 Telephone-style handset XLR-4F: Telephone-style handset with coiled cord and push to talk button on telephone handset- four-pin female XLR for standard Clear-Com connection. CC-15-MD4 headset: Single ear noise-canceling headset, Electret mic, with Mini DIN connector CZ11451 CC-30-MD4 headset: Dual ear noise-canceling headset Electret mic, with Mini DIN connector CZ11452 HS16 headset: Single muff lightweight headset with directional Electret mic. Mini DIN connector CZ11453 HSI6000 headset adapter: 2.5mm Headset Adapter for BP200 Beltpack and BP300 Beltpack CZ11454 HS4-3 earpiece and lapel mic: Earpiece & lapel (clip-on) Electret mic G Clear-Com 4-pin MD-XLR4M adapter: Adapter Cable for use with Clear-Com 4-pin XLR4F terminated dynamic headset with DX Mini DIN headset connector G MD-XLR4F adapter: Adapter Cable for using XLR4M terminated dynamic headset with DX Mini DIN headset connector G394 Headset extension cable: Single 6' headset extension cable for HS15/15D, HS16 headsets G HME DX SERIES ACCESSORIES 101G048 MD-XLR5F adapter: Adapter Cable for using XLR5M terminated dynamic headset with DX Mini DIN headset connector DX base antenna: 5.9 Reverse TNC base antenna

10 HME Retail Pricelist Price Price 647G006 DX antenna splitter/combiner: 2-Way Antenna Splitter/Combiner G RMK200 mounting kit: 1RU Mounting Panel for base antennas, includes two 2' cables G DX 6' remote antenna kit: Single 6 foot (1.8m) RP-TNC jack to RP-TNC plug cable with right angle bracket for remote base antenna on DX base stations, two kits are required to remote both antennas G DX 30' remote antenna kit: Single 30 foot (7.7m) RP-TNC jack to RP-TNC plug cable with right angle bracket for remote base antenna on DX base stations, two kits are required to remote both antennas BAT41 rechargeable battery: Battery, Li-ion rechargeable, for BP200/210/300 beltpacks and WH200/210/ CZ11378 AC40A battery charger: Battery charger, 4-port quick charger w/adapter, 115/230 VAC, power cord for BAT41 batteries G027 AC50 battery charger AC power adapter world-wide: Replacement AC power adapter for AC50 battery charger, with US, UK, Europe, and Australian plugs G Z1 AC850A charger: 4 Port charger for BAT850 battery, power supply, cord and manual 1' ' G HS-XLR4F interface cable: 48" Interface cable. Bare leads to XLR4F headset connector G HS-XLR4M interface cable: 48" Interface cable. Bare leads to XLR4M headset connector G Base station monitor speaker: Compact Speaker with enclosure. Plugs into rear of BS200 base station or WS200 Speaker Station G362 4 ft. DX headset cable w/ connector: 48" headset bare leads cable with molded mini-din connector G372 CAT-5 cable: Base station Interconnect Cable - 7' with RJ45 connectors G018 Travel case for DX300ES: Travel Case for DX300 Systems. Includes foam inserts, holds MB300 base station, 4 belt packs, with storage for cables and headsets G G067 HME PRO850 HEADSETS CZ11458 DX Beltpack pouch: Rubber outer case for DX Beltpack DX410 belt pack pouch: Rubber outer case for DX, BP410 belt pack CC-15-X4 Single-ear headset, 4F: Single ear electret microphone noise canceling headset with 4-pin female connector for use with HME PRO850 or Clear-Com V-series, FreeSpeak/ CellCom, RS-700 & HelixNet CZ11459 CC-30--X4 Dual-ear headset, 4F: Dual ear electret microphone noise canceling headset with 4-pin female connector for use with HME PRO850 or traditional Clear-Com V-series, FreeSpeak/ CellCom, RS-700 & HelixNet HME PRO850 WIRELESS ACCESSORIES G RAK850 remote kit: Ground Plane Adapter for one BS850 base station antenna with 30' of cable G RMK850 mounting kit: 1RU panel for mounting BS850 base station antennas, with 2' of cable G BAT850 NiMH battery: 7.2V 2100mAH NiMH rechargeable battery for BP850 beltpack, MB100 base station, MB300ES base station and WS200 Speaker Station

11 HME Retail Pricelist Price Price CZ11484 AC850A charger: 4 Port charger for BAT850 batteries, power supply, cord and manual 1' ' G073 Battery sled, 6 AA: Battery sled for BP850 Beltpack, WS200 Station, and MB100/MB300ES bases. Holds 6 AA cells G658 BP850 battery sled door: Battery sled door for BP850 Beltpack G342 BP850 Config cable: BP850 Beltpack configuration cable G018 Power supply cable: 115 VAC cable for use with VAC power supply CZ11421 Headset Consumables ES-1 12VDC power supply with cord: 115/230 VAC universal power supply and cord for HME Wireless base stations, WS200 Speaker Station, or AC40A battery charger 1 pair ear sock covers for headsets: Ear Sock cover for CC-40, CC-60, and discontinued CC-95 and CC-260 enclosed ear headsets, 1 pair HS-ES 1 pair ear sock covers for 300/400 headsets: Ear Sock cover for all CC-300 and CC-400 headsets, 1 pair HS-WS CC-300/400 Windscreen: CC-300/400 Windscreen and Cable tie Z CC-300 Replacement Temple Pad: CC-300 Replacement kit Z CC-300/400 Replacement Ear Pad: CC-300/400 Replacement kit HC-X4 CC-300 spare cable with XLR(f) 4 pin: CC-300 Replacement kit HC-Y4 CC-300 spare cable with XLR(m) 4 pin: CC-300 Replacement kit HC-X5 CC-300 spare cable with XLR(m) 5 pin: CC-300 Replacement kit HC-X6 CC-300 spare cable with XLR(m) 6 pin: CC-300 Replacement kit HC-X7 CC-300 spare cable with XLR(f) 7 pin: CC-300 Replacement kit HC-Y5 CC-300 spare cable with XLR(f) 5 pin: CC-300 Replacement kit HC-B6 CC-300 spare cable with no connector: CC-300 Replacement kit Z CC-40/60 Replacement Ear Cushion: CC-40/60 Replacement Z CC-40/60 Replacement Temple Pad: CC-40/60 Replacement Z CC-40/60 Replacement Windscreen: CC-40/60 Replacement CC-27-CUS CC-27 Replacement Ear Cushion: CC-27 Replacement

12 HME Retail Pricelist Price Price CC-27-CUS10 CC-27 Pack of 10 Replacement Ear Cushions: CC-27 Replacement CC-27-CUS25 CC-27 Pack of 25 Replacement Ear Cushions: CC-27 Replacement CC-25-CUS CC-25 Replacement Ear Cushion: CC-25 Replacement CC-26K-WINZ CC-26K Replacement Windscreen: CC-26K Replacement CC-26K-CUSZ CC-26K Replace Ear Cushion: CC-26K Replacement CC-010-ETIP CC-010 & CC-010A Replacement Ear Tip: CC-010 & CC-010A Replacement CC-010-ETUBE DIGITAL MATRIX ECLIPSE-HX ECLIPSE-HX MAIN FRAMES CC-010A Replacement Ear Tube and Ear Tip: CC-010A Replacement ECLIPSE-HX-PICO Eclipse HX-Pico, 36-port 1RU digital matrix: 1RU HX-PiCo 36-port matrix frame. 1RU frame with user menu and 32 RJ-45 programmable panel/4- wire ports and four 4-wire in/out ports. Matrix has dual-redundant PSUs. The price now includes EHX 8.x 15' ' ECLIPSE-HX-DELTA-0P Spare HX-Delta frame, without port cards: Spare Eclipse HX-Delta 4 slot matrix frame. Including 3RU card frame with three interface module slots, dual-redundant CPU's (CPU-HX-SPARE) and dual-redundant power supplies. 19' ' ECLIPSE-HX-DELTA-16P Eclipse HX-Delta, with 16 ports: Eclipse HX-Delta 4 slot 16-port matrix frame. Including 3RU card frame with back-plane circuit boards and three interface module slots, dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 1 x MVX-A16-HX port card. Requires EHX 24' ' ECLIPSE-HX-DELTA-32P Eclipse HX-Delta, with 32 ports: Eclipse HX-Delta 4 slot 32-port matrix frame. Including 3RU card frame with back-plane circuit boards and three interface module slots, dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 2 x MVX-A16-HX port card. Requires EHX 30' ' ECLIPSE-HX-DELTA-48P Eclipse HX-Delta, with 48 ports: Eclipse HX-Delta 4 slot 48-port matrix frame. Including 3RU card frame with back-plane circuit boards and three interface module slots, dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 3x MVX-A16-HX port card. Requires EHX 41' ' ECLIPSE-HX-DELTA-64P Eclipse HX-Delta, with 64 ports: Eclipse HX-Delta 4 slot 64-port matrix frame. Including 3RU card frame with back-plane circuit boards and three interface module slots, dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 4 x MVX-A16-HX port card. Requires EHX 52' ' G048 Spare external PSU bracket for Eclipse HX-Delta: PSU bracket to hold the Eclipse-HX Delta external PSUs ECLIPSE-HX-MEDIAN-0P Spare HX-Median frame, without port cards: Spare Eclipse HX-Median 7 slot matrix frame. Including 6RU card frame with eight interface module slots, dual-redundant CPU's (CPU-HX-SPARE) and dual-redundant power supplies. 25' ' ECLIPSE-HX-MEDIAN-16P Eclipse HX-Median, with 16 ports: Eclipse HX-Median 7 slot 16-port matrix frame. Including 6RU card frame with back-plane circuit boards and eight interface module slots, dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 1 x MVX-A16-HX port card. Requires EHX 30' ' ECLIPSE-HX-MEDIAN-32P Eclipse HX-Median, with 32 ports: Eclipse HX-Median 7 slot 32-port matrix frame. Including 6RU card frame with back-plane circuit boards and eight interface module slots, dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 2 x MVX-A16-HX port cards. Requires EHX 37' '008.85

13 HME Retail Pricelist Price Price ECLIPSE-HX-MEDIAN-48P Eclipse HX-Median, with 48 ports: Eclipse HX-Median 7 slot 48-port matrix frame. Including 6RU card frame with back-plane circuit boards and eight interface module slots, dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 3 x MVX-A16-HX port cards. Requires EHX 50' ' ECLIPSE-HX-MEDIAN-64P Eclipse HX-Median, with 64 ports: Eclipse HX-Median 7 slot 64-port matrix frame. Including 6RU card frame with back-plane circuit boards and eight interface module slots, dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 4 x MVX-A16-HX port cards. Requires EHX 61' ' ECLIPSE-HX-MEDIAN-80P Eclipse HX-Median, with 80 ports: Eclipse HX-Median 7 slot 80-port matrix frame. Including 6RU card frame with back-plane circuit boards and eight interface module slots, dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 5 x MVX-A16-HX port cards. Requires EHX 75' ' ECLIPSE-HX-MEDIAN-96P Eclipse HX-Median, with 96 ports: Eclipse HX-Median 7 slot 96-port matrix frame. Including 6RU card frame with back-plane circuit boards and eight interface module slots, dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 6 x MVX-A16-HX port cards. Requires EHX 87' ' ECLIPSE-HX-MEDIAN-112P Eclipse HX-Median, with 112 ports: Eclipse HX-Median 7 slot 112-port matrix frame. Including 6RU card frame with back-plane circuit boards and eight interface module slots, dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 7 x MVX-A16-HX port cards. Requires EHX 100' ' ECLIPSE-HX-OMEGA-0P Spare Eclipse HX-Omega frame, without port cards: Spare Eclipse HX-Omega 15 slot matrix frame. Including 6RU card frame with dual-redundant CPU's (CPU-HX-SPARE) and dual-redundant power supplies. 35' ' ECLIPSE-HX-OMEGA-16P Eclipse HX-Omega, with 16 ports: Eclipse HX-Omega 15 slot 16-port matrix frame. Including 6RU card frame with dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 1 x MVX-A16-HX port card. Requires EHX 46' ' ECLIPSE-HX-OMEGA-32P Eclipse HX-Omega, with 32 ports: Eclipse HX-Omega 15 slot 32-port matrix frame. Including 6RU card frame with dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 2 x MVX-A16-HX port cards. Requires EHX 58' ' ECLIPSE-HX-OMEGA-48P Eclipse HX-Omega, with 48 ports: Eclipse HX-Omega 15 slot 48-port matrix frame. Including 6RU card frame with dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 3 x MVX-A16-HX port cards. Requires EHX 70' ' ECLIPSE-HX-OMEGA-64P Eclipse HX-Omega, with 64 ports: Eclipse HX-Omega 15 slot 64-port matrix frame. Including 6RU card frame with dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 4 x MVX-A16-HX port cards. Requires EHX 83' ' ECLIPSE-HX-OMEGA-80P Eclipse HX-Omega, with 80 ports: Eclipse HX-Omega 15 slot 80-port matrix frame. Including 6RU card frame with dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 5 x MVX-A16-HX port cards. Requires EHX 96' ' ECLIPSE-HX-OMEGA-96P Eclipse HX-Omega, with 96 ports: Eclipse HX-Omega 15 slot 96-port matrix frame. Including 6RU card frame with dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 6 x MVX-A16-HX port cards. Requires EHX 111' ' ECLIPSE-HX-OMEGA-112P Eclipse HX-Omega, with 112 ports: Eclipse HX-Omega 15 slot 112-port matrix frame. Including 6RU card frame with dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 7 x MVX-A16-HX port cards. Requires EHX 126' ' ECLIPSE-HX-OMEGA-128P Eclipse HX-Omega, with 128 ports: Eclipse HX-Omega 15 slot 128-port matrix frame. Including 6RU card frame with dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 8 x MVX-A16-HX port cards. Requires EHX 140' ' ECLIPSE-HX-OMEGA-144P Eclipse HX-Omega, with 144 ports: Eclipse HX-Omega 15 slot 144-port matrix frame. Including 6RU card frame with dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 9 x MVX-A16-HX port cards. Requires EHX 155' '505.60

14 HME Retail Pricelist Price Price ECLIPSE-HX-OMEGA-160P Eclipse HX-Omega, with 160 ports: Eclipse HX-Omega 15 slot 160-port matrix frame. Including 6RU card frame with dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 10 x MVX-A16-HX port cards. Requires EHX 169' ' ECLIPSE-HX-OMEGA-176P Eclipse HX-Omega, with 176 ports: Eclipse HX-Omega 15 slot 176-port matrix frame. Including 6RU card frame with dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 11 x MVX-A16-HX port cards. Requires EHX 184' ' ECLIPSE-HX-OMEGA-192P Eclipse HX-Omega, with 192 ports: Eclipse HX-Omega 15 slot 192-port matrix frame. Including 6RU card frame with dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 12 x MVX-A16-HX port cards. Requires EHX 199' ' ECLIPSE-HX-OMEGA-208P Eclipse HX-Omega, with 208 ports: Eclipse HX-Omega 15 slot 208-port matrix frame. Including 6RU card frame with dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 13 x MVX-A16-HX port cards. Requires EHX 214' ' ECLIPSE-HX-OMEGA-224P Eclipse HX-Omega, with 224 ports: Eclipse HX-Omega 15 slot 224-port matrix frame. Including 6RU card frame with dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 14 x MVX-A16-HX port cards. Requires EHX 226' ' ECLIPSE-HX-OMEGA-240P Eclipse HX-Omega, with 240 ports: Eclipse HX-Omega 15 slot 240-port matrix frame. Including 6RU card frame with dual-redundant CPU's (CPU-HX-SPARE), dual-redundant power supplies and 15 x MVX-A16-HX port cards. Requires EHX 236' ' ECLIPSE-HX MATRIX CARDS MVX-A16-HX Spare 16 port card for Eclipse-HX: Spare Eclipse HX-Median, HX-Delta or HX-Omega 16 port analog panel/direct/interface front and rear card set. Takes one slot in the matrix frame. 13' ' CPU-HX-SPARE Spare Eclipse-HX CPU card: Spare Eclipse HX-Median, HX-Delta or HX-Omega system processor front card. This stores and executes system configurations. 3' ' E-QUE-HX Eclipse-HX Integra Wireless or E1/T1 Trunking card: Eclipse HX-Delta, HX-Median or HX-Omega Integra digital wireless card set to support up to 10 active antennas. The rear card has eight ports for directly connecting antennas (without power) and up to 10 antennas using the optional PD2203 splitters. Can also be used for E1 (30 Channel) or T1 (24 Channel) trunking. Maximum four cards per Eclipse frame as standard. Takes one slot in the 6RU or 3RU matrix frame. 16' ' IVC-32-HX Eclipse-HX IP card: IVC-32-HX Eclipse-HX AoIP interface (includes front and read cards). Employs IV-Core technology to provide 32 independently configurable IP audio channels for connection to V-Series panels, Concert clients and other Eclipse-HX matrix systems (as Tie lines or Intelligent Links). Up to 3 Audio Channels can be assigned to each V-series panel. All channels may be independently optimized for LAN, WAN or Internet connections and employ the established G.722 low latency Audio Codec. Maximum of 4 cards per Eclipse-HX frame (excluding HX-Omega which supports 6). Requires one card slot. 17' ' E-MADI64-HX Eclipse-HX MADI 64 Ch. Card: Eclipse-MADI-HX 64 port card set. Configurable via ECS for 16, 32, 48, 56 or 64 channels and sample rates of 44.1 KHz, 48.0 KHz or 96 KHz (32 Ch. only) in this mode. All ports include VOX. Duplex LC connections using Multi-mode fiber, 1km/0.6 mile distance continuous glass. BNC Coax connections for Input, Output and Video/ world clock Input. Requires EHX v7.0 or newer. Takes one slot in the 6RU or 3RU matrix frame. 14' ' LMC-64-HX Eclipse-HX level meter card: LMC-64-HX level meter card set for the Eclipse HX-Delta 4 slot, Eclipse HX-Median 7 slot or Eclipse HX-Omega 15 slot matrices. Provides Clear-Vu meters on Production Maestro Pro giving up to 64 channels of matrix input or output port metering. Takes one slot in the 6RU or 3RU matrix frame. 15' ' E-FIB-HX Eclipse-HX Fiber interface card: Fiber-Net interface card set for the 4 slot HX-Delta, 7 slot HX-Median or 15 slot HX-Omega matrices. A Single E-FIB-HX provides connections for both a main and a backup Fiber ring. Provides Duplex LC single mode fiber connections, supporting up to 10km (6.6mile) of continuous glass. Maximum two card sets per Eclipse HX frame. Takes one slot in the 6RU or 3RU matrix frame. 14' ' ECLIPSE HX MATRIX SOFTWARE