EasyBraid. Why EasyBraid? Copyright EasyBraid All Rights Reserved
|
|
- Kellie Lester
- 6 years ago
- Views:
Transcription
1 EasyBraid Why EasyBraid? 1
2 Why EasyBraid? Secured Grounding Faster Start-up Sustained Power Output Increased Plating Gold Plated Connectors Easy Color Identification Unique New Tip Profiles Quality Control & Traceability Value Price 2
3 Overview Introduction Company Introduction Our customers & Industries we service Certifications Our Products Product Comparison Conclusion 3
4 Mission Statement To research, develop and manufacture products related to power and thermal demand requirements. Our goals: Quality Increased Productivity Cost Reduction 4
5 Industries We Supply Avionics Disk Drive Manufacturing Contract Electronic Manufacturing (CEM S) Medical Electronics Power Supply Manufacturers Solar Cell Production Telecommunications 5
6 Certifications NRTL - Safety TUV / GS - Safety CE - Safety ISO Quality ISO Environment SGS Lead-Free 6
7 EB-2000S Soldering Station (450KHz) EK Series EP Series ES Series Part Number Description Warranty EB-2000PS Power Supply 1 Years SHP-K Handpiece 30 Days SHH-3 Workstand 30 Days 7
8 EB-5000S Soldering Station (13.56MHz) ET Series Part Number Description Warranty EB-5000PS-1 Power Supply 1 Years EB-5000PS-2 Power Supply 1 Years SHP-T Handpiece 30 Days SHH-2 Workstand 30 Days 8
9 EB-9000S Soldering Station (13.56MHz) EBM Series Power Plus Micro Fine Part Number Description Warranty EB-9000PS-1 Power Supply 4 Years EB-9000PS-2 Power Supply 4 Years SHP-1 Handpiece 90 Days SHH-1 Workstand 90 Days 9
10 Why EasyBraid? 10
11 No Calibration Required EasyBraid soldering irons do not need calibration. (EOS) 11
12 ESD Safe Verified by third parties in hard drive industry to be completely ESD Safe. Point 1 Point 2 Point 4 Point 3 Point 5 Point 6 12
13 Electrical Overstress EasyBraid soldering irons conform to international standards of Electrical Overstress (EOS) Data Point Tip to Ground AC Leakage (<20mv) Tip to Ground Resistance <2ohms Hot Cold
14 Grounding Scheme Comparison EasyBraid offers an improved grounding scheme. 14
15 MX500 Grounding Scheme No secured grounding connection exists. Grounding is highly dependent on the connectivity between the front and back enclosure. (a potential grounding problem exists if oxidation occurs or there is an uneven fit between the front and back enclosure). 15
16 EB-9000S Secured Grounding Scheme Secured grounding path to insure AC Filter, PCBA, RF connectors, Front and Back enclosure are all physically securely grounded together. 16
17 Faster Start-Up 17
18 Sustained Power Output 18
19 EB-9000S Secured Grounding Scheme Secured grounding path to insure AC Filter, PCBA, RF connectors, Front and Back enclosure are all physically securely grounded together. 19
20 Plating Improvements Additional plating at tip front Denser plating means longer tip life 20
21 Gold Plated Connectors Gold Plated Connectors improve connectivity and optimizes power transition. 21
22 Easy Color Identification Color coded bands for easy identification of tip temperatures Patented colour band for easy temperature identification Blue = 600 series, Yellow = 700 series, Red = 800 series 22
23 Unique Tip Profiles Unique tip profiles such as Mini Wave tips for SMT applications EBMXWV020 EBMXWV031 EBMXWV300 23
24 EBM Series - Power Plus Tips Faster Soldering Increased Performance without no increase in temperature Thicker Plating to extend tip life Large Copper Mass Increases Stored Heat Increased Plating Long Tip Life 24
25 Quality Control & Traceability Tracking systems allows finished products to be traced back to the original work order, QC report and supplier batch Unique S/N# allows Traceability Product S/N# Work Order Unique S/N# Assembly Work Order Component Component Component Supplier Batch# Supplier Batch# Supplier Batch# 25
26 Why EasyBraid? Secured Grounding Faster Start-up Sustained Power Output Increased Plating Gold Plated Connectors Easy Color Identification Unique New Tip Profiles Quality Control & Traceability 26
27 EasyBraid Quality Increase Productivity Cost Reduction End Presentation 27
Perfect for SMD Rework.
Perfect for SMD Rework. Introducing the new CV-500 Connection Validation Metcal is pleased to introduce the CV-500 Connection Validation, the companion station to the CV-5210 system. The CV-500 packs all
More informationbrand new color. Innovation has a Introducing the new CV-5200 Connection Validation Soldering Station
Innovation has a brand new color. Introducing the new CV-5200 Connection Validation Soldering Station Metcal is raising the bar with a technology that will change hand soldering forever. Metcal soldering
More informationMetcal MFR-2200 Series Dual Output 60W Solder / Rework Station Series
ual Output 60W Solder / Rework Station Series Test Equipment epot - 800.517.8431-99 Washington Street Melrose, M 02176 - TestEquipmentepot.com MFR-2200 Series Features and enefits Many options so you can
More informationMetcal MFR-1100 Series 60W Single Output Solder / Rework System
60W Single Output Solder / Rework System MFR-1100 Series Features and Benefits Many options enable you to create the system you need 60W output gives you the power you need while using lower and safer
More informationMetcal MFR-1300 Series Dual Output 60W Desolder / Solder System w/internal Pump
ual Output 60W esolder / Solder System w/internal Pump MFR-1300 Series Features and enefits Self-contained internal pump and large capacity collection chamber makes desoldering easy Pistol handpiece can
More informationMetcal MFR-1300 Series Dual Output 60W Desolder / Solder System w/internal Pump
ual Output 60W esolder / Solder System w/internal Pump Test Equipment epot - 800.517.8431-99 Washington Street Melrose, M 02176 - TestEquipmentepot.com MFR-1300 Series Features and enefits Self-contained
More informationCompactBlock Guard I/O EtherNet/IP Safety Modules
Installation Instructions CompactBlock Guard I/O EtherNet/IP Safety Modules Catalog Numbers 1791ES-IB8XOBV4, 1791ES-IB16 Topic Page Important User Information 2 North American Hazardous Location Approval
More informationReady-to-use package - all you need is mains input power
All inclusive package, no hassles for customer Developed from best of breed tools & accessories Covers SMD/PTH soldering & desoldering Ideal for service centers, Labs Ready-to-use package - all you need
More informationPRODUCT SPECIFICATION
SINGLE ROW CONNECTOR SYSTEM 1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors
More informationPreliminary Product Overview
Preliminary Product Overview Features 1.0 A per channel / 3.0 A Total Current Maximum Voltage (AC or DC): +150 V Low On-State Resistance < 1.0 Ω 10 GΩ Input to Output Isolation < 10us Switching Time High
More informationMOLEX COPPER FLEXIBLE CIRCUIT SOLUTIONS
MOLEX COPPER FLEXIBLE CIRCUIT SOLUTIONS CIRCUITS DESIGNED WITH A RANGE OF CAPABILITIES Maximum Performance for Demanding Applications Flex and Rigid Flex (Typical) Layer Count 1 to 8 Layers Standard Panel
More informationModel XDL S Rev A
Delay Line DESCRIPTION The XDL15-3-030S can be used in amplifier linearization applications from 135 2700Mhz. Small form factor of XDL15-3-030S is ideal for cascading to obtain longer delay. The Xinger
More informationEmbedded I/O Expansion Board with 10 Outputs
Installation Instructions Embedded I/O Expansion Board with 10 Outputs Catalog Number 1799-OQ10X Topic Page Important User Information 2 Environment and Enclosure 3 About the Board 4 Install the Board
More informationMetcal MX User Guide. Power. Precision. Performance. Soldering, Desoldering and Rework System _4
Metcal MX-5200 Soldering, Desoldering and Rework System User Guide Power. Precision. Performance. 7000-2500_4 Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
More informationELECTRICAL SPECIFICATIONS** Frequency. Power Handling. Directivity. .064±.013 [1.64±0.33] Pin ±.004 [3.05±0.10] Pin 3
Pico Xinger 20dB Directional Coupler Description The 1P620 Pico Xinger is a low profile, miniature 20dB directional coupler in an easy to use surface mount package designed for MMDS and WLAN applications.
More informationFine-Coax Wire Connector for Portable Devices. FI-JH Series
COMPONENTS PRODUCT INFORMATION NEW Fine-Coax Wire Connector for Portable Devices FI-JH CONNECTOR MB-0179-1 November 2007 RoHS Compliant In addition to incorporating new functions such as one
More informationPRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors terminated with 20 to
More informationPAGE 1/6 ISSUE SERIES Micro-SPDT PART NUMBER R516 X3X 10X R 516 _ 1 0 _
PAGE 1/6 ISSUE 13-08-18 SERIES Micro-SPDT PART NUMBER R516 X3X 10X R516 series: the RAMSES concept merges with the SLIM LINE technology, breaking up the frequency limits of SMT switches : - FULL SMT TECHNOLOGY
More informationMPI TS150-HP 150 mm High Power Manual Probe System For accurate High Power measurements up to 10 kv, 600 A
MPI TS15-HP 15 mm High Power Manual Probe System For accurate High Power measurements up to 1 kv, 6 A FEATURES / BENEFITS Universal Use Designed specifically for high power device measurement and wide
More informationTHERMASGARD TM 65. Immersion screw-in duct temperature measuring transducer, calibratable, with multi-range switching and active output TECHNICAL DATA
Patented quality product (Immersion sensor patent no. DE 10 2012 017 500.0) Calibratable temperature measuring transducer THERMASGARD with eight switchable measuring ranges, continuous linear output, enclosure
More informationin-built Vacuum Pick-up for large SMD ICs RS232 to USB interface for direct connection to PC
Hi-End Hi-features rich 3-in-1 SMT/PTH Rework System Model MFRS-500SUSB reliable & caring since 1976 in-built Vacuum Pick-up for large SMD ICs RS232 to USB interface for direct connection to PC LEAD RoHS
More information! Ranges from -45º to 650ºC. ! Rapid heating, cooling and settling. ! Switch test, ramp, step and preset functions
DBC SERIES DBC 150/650 Series Dry Block Temperature Calibrators 99 Washington Street Melrose, MA 02176 Fax 781-665-0780 TestEquipmentDepot.com! s from -45º to 650ºC! Rapid heating, cooling and settling!
More informationGHz db Min db Max Max: Phase Balance. .053±.011 [1.35±0.27] Pin ±.004 [3.05±0.10] Pin 3
` Model 1P603S Hybrid Coupler 3 db, 90 Features: 2.3 2.7 GHz. W-LAN and MMDS Low Loss High Isolation 90 o Quadrature Surface Mountable Tape And Reel Available in Lead-Free (as illustrated) or Tin- Lead
More informationREPORT OF ELECTROMAGNETIC SUSCEPTIBILITY TESTS PERFORMED ON GPS ANTENNA PART NUMBER 42G1215A-XT-1-N PREPARED FOR:
Page 1 of 64 National 1536 East Valencia Drive Technical Fullerton, California 92831 Systems Tel: 714-879-6110 Fax: 714-879-6117 www.ntscorp.com REPORT OF ELECTROMAGNETIC SUSCEPTIBILITY TESTS PERFORMED
More informationDG8SAQ VNWA 3 - Expansion board Manual v1.3
, 129 Devizes Road, Trowbridge Wilts, BA14-7SZ, United Kingdom Orders@.net DG8SAQ VNWA 3 - Expansion board Manual v1.3 Fig 1. VNWA 3 Expansion Board fitted to VNWA 3 Main PCB 1. Introduction: The DG8SAQ
More informationERSA i-tool The World s Most intelligent Professional Soldering Iron!
The Revolutionary ERSA i-con and i-tool: intelligent and Performing Power For the Ultimate innovation in Hand Soldering ERSA GmbH Soldering & Inspection Systems ERSA i-tool The World s Most intelligent
More informationESD WORK TABLE WITH DIGITAL REWORK STATION
ESD WORK TABLE WITH DIGITAL REWORK STATION (SMD Rework / PTH Rework) Package - 1 TIP Activator SMD Components Soldering PTH Desoldering QFP / PLCC / SOIC SOP Desoldering Fume Absorber DIGITAL REWORK STATION
More informationELECTRICAL SPECIFICATIONS**
ico Xinger 1dB Directional Coupler Description The 161 ico Xinger is a low profile, miniature 1dB directional coupler in an easy to use surface mount package designed for MMDS and WLAN applications. The
More informationJOVY SYSTEMS. isolder-40. User Manual. Rev. 1.00
JOVY SYSTEMS isolder-40 User Manual Rev. 1.00 1 Thank you for purchasing Jovy systems isolder-40 soldering station. Please read this manual before operating the isolder-40. Keep the manual in accessible
More informationEDSYN Quality. PHONE: FAX (Sales): FAX (Service): INTERNET:
When your name is on the line in today s electronics universe, precise performance and adaptability count. EDSYN is dedicated to manufacturing the world s finest quality products in accordance to the line
More informationPLUTO ELIABLE SOLDERING & REWORK STATIONS. Since 2002 PLUTO
Since 2002 SOLDERING & REWORK STATIONS R PLU TO D 7 77 UGGED ELIABLE ADICAL We are a Leading and also pioneer in indigenously deeloped soldering and de soldering station and haing a more than decade of
More informationREPORT OF ELECTROMAGNETIC SUSCEPTIBILITY TESTS PERFORMED ON GPS ANTENNA PART NUMBER 42G1215A-XT-1-N PREPARED FOR:
Page 1 of 40 National 1536 East Valencia Drive Technical Fullerton, California 92831 Systems Tel: 714-879-6110 Fax: 714-879-6117 www.ntscorp.com REPORT OF ELECTROMAGNETIC SUSCEPTIBILITY TESTS PERFORMED
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C 2.54mm (.100") Pitch FEATURES AND SPECIFICATIONS Features and Benefits
More information07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationSafeC S to MSR127 Conversion
Application Note SafeC S to MSR127 Conversion IMPORTANT: A risk assessment must be completed to assure that all tasks and hazards are considered and confirm that the example circuit will provide adequate
More informationMFR-PS2200 MFR-H1-SC2 MFR-H2-ST2 MFR-H4-TW WS1 MFR-WSPT
MFR-2200 Series Dual Output Simultaneous Soldering & Rework Systems The MFR-2200 Series features dual output capability allowing users to select operation of one handpiece or two hand-pieces simultaneously.
More informationPRODUCT SPECIFICATION
1.0 SCOPE DDR4 DIMM SOCKET This Product Specification covers the 0.85mm centerline gold plated DDR4 DIMM edge card connector for 1.40 ± 0.10 thick memory modules..0 PRODUCT DESCRIPTION.1 PRODUCT NAME AND
More informationSoldering Iron Evaluation
The tests were done by an independent contract manufacturer for the purpose of evaluating for future purchases, what they have deemed to be the best soldering station, for their respective applications.
More informationDatasheet Stock No: RS Pro
Datasheet Stock No: 9012718 RS Pro Product Details: Our RS Pro metal oxide varistors have been designed to meet the abnormal overvoltage requirements outlined in Section 39.4 of the UL1449 standard (4
More information07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationEXTreme Guardian Power Connector System
Exceed high-current and reliability requirements in topend server and high-power applications with Molex s compact,, providing EMI/RFI shielding, overmolding and discretewire options for design flexibility
More informationSILICON DESIGNS, INC Model 1210 ANALOG ACCELEROMETER
SILICON DESIGNS, INC Model 1210 ANALOG ACCELEROMETER SENSOR TYPE: Capacitive Micromachined Nitrogen Damped Hermetically Sealed ±4V Differential Output or 0.5V to 4.5V Single Ended Output Fully Calibrated
More informationMVAD040 Series 40W 2" x 4" AC-DC Power Supply Converter
www.murata-ps.com MVAD040 Series DESCRIPTION The MVAD040 series switching power supplies utilize advanced component and circuit technologies to deliver high effi ciency. Designed for Medical, Telecom,
More informationAVX Medical Products. Version 18.2
AVX Medical www.avx.com Version 18.2 Introduction ABOUT AVX AVX is an industry leader in the manufacture and supply of passive electronic components and interconnect solutions. Our worldwide manufacturing
More information120 WATT FLEX ATX TYPE WITH ACTIVE PFC
120 WATT FLEX ATX TYPE WITH ACTIVE PFC FXA120-W-F SERIES GENERAL SPECIFICATION This specification describes the performance characteristics of a grounded, with active PFC function, single phase, 120 watts,
More information07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationMini PCI Express Card Socket
Mini PCI Express Card Socket Document No: Page: 1 of 4 1. Scope This specification covers the material and performance requirements for the Mini PCI Express Card Socket series. 2. Applicable documents
More informationSpecification for temperature sensor calibration setup
1. Item description Automated Temperature calibration setup made of: A. High accuracy temperature bath with internal and external reference probe, multiple sensors insert kits, carry case and other accessories.
More informationCurve Tracing Systems
Curve Tracing Systems Models Available MultiTrace: The most flexible solution for devices up to 625 pins, capable of any of the applications described here. Comes with a PGA-625 fixture MegaTrace: A larger
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Power Connectors FEATURES AND SPECIFICATIONS Features and Benefits Positive
More informationProduct Specification
MEC6 Series Socket, Vertical Orientation Other configurations available for: Right Angle Application See www.samtec.com for more information. Page 1 1.0 SCOPE 1.1 This specification covers performance,
More informationELECTRICAL SPECIFICATIONS**
REV A Hybrid Couplers 3 db, 90 Description The 1P503AS Pico Xinger is a low profile, high performance 3dB hybrid coupler in an easy to use manufacturing friendly surface mount package. It is designed for
More informationIntroduction. Purpose. Introduction to JAE s HDMI Connector, DC* Series
Purpose Introduction Introduction to Objectives Application examples Main features General specifications Materials and finishes Content X pages Learning Time: X mins v1.0 1 JAE DC* Series HDMI Connector
More informationGSV-1A4 M12/2 M12/2. Highlights
GSV-1A4 M12/2 M12/2 Highlights Input sensitivity: 2mV/V; 4mV/V, 2 mv/v, 1mV/V, 0.5mV/V configurable via jumpers Output signals ±10V AND 12mA+-8mA on 15 pin Sub-D Integrated half and quarter bridge completion
More informationElcon CROWN EDGE Card Edge-style High Current Connectors
Elcon CROWN EDGE Card Edge-style High Current Connectors CROWN EDGE is a board-to-board power interconnect solution that uses Elcon high performance Crown contact technology configured to mate directly
More informationTGL2206-SM GHz 100 Watt VPIN Limiter
Applications Receive Chain Protection Commercial and Military Radar 5 mm x 5 mm QFN Package Product Features Functional Block Diagram Frequency Range: 2.0 to 5.5 GHz Insertion Loss: < 1.0 db Peak Power
More informationUser s Guide. RP7000S Series Single-Ended Active Probe. Nov RIGOL Technologies, Inc.
User s Guide RP7000S Series Single-Ended Active Probe Nov. 2013 RIGOL Technologies, Inc. Guaranty and Declaration Copyright 2013 RIGOL Technologies, Inc. All Rights Reserved. Trademark Information RIGOL
More informationBOARD-LEVEL TEST PROCEDURE FOR THE GYROSCOPE SUSPENSION SYSTEM (GSS) MUX/OSCILLATOR/CHARGE CTRL (MUX) BOARD. GP-B Procedure P0607 Rev -
W. W. Hansen Experimental Physics Laboratory STANFORD UNIVERSITY STANFORD, CALIFORNIA 94305-4085 Gravity Probe B Relativity Mission BOARD-LEVEL TEST PROCEDURE FOR THE GYROSCOPE SUSPENSION SYSTEM (GSS)
More informationKUANTECH (SHEN ZHEN) COMPANY LIMITED KSAFD W1UK
1 GENERAL... 2 1.1 Description... 2 2 INPUT REQUIREMENTS... 2 2.1 Input Conditions... 2 2.2 AC Inrush Current... 2 3 OUTPUT REQUIREMENTS... 2 4 MECHANICAL... 3 4.1 Enclosure And Layout... 3 4.2 Input and
More informationThe Multi-core Coloured Soft Control Cables
VCT-F The Multi-core Coloured Soft Control Cables 16core X 0.3 2 colour available in Grey or Black Cold Resistant -25 C Heat Resistant +60 C Application control cables covers all electrical installation
More informationOSFP Connector Cage & Cable System
PAGE /6 /5/7 UNRESTRICTED OSFP Connector Cage & Cable System PAGE /6 /5/7 UNRESTRICTED.0 SCOPE This Product Specification covers performance, test and quality requirements for the JPC Quad Small Form Factor
More information0.5mm pitch stroke conforming to USB2.0 Standard. DD2 Series. [Plug] [Receptacle] [Cradle]
COMPONENTS PRODUCT INFORMATION NEW 0.5mm pitch stroke conforming to USB2.0 Standard DD2 Series CONNECTOR MB-0112-3 July 2007 RoHS Compliant [Plug] [Receptacle] [Cradle] The DD2 series of connectors are
More informationENGINEERING SPECIFICATION SHEET. Table of Contents 1 SCOPE ELECTRICAL SPECIFICATION...5
Table of Contents 1 SCOPE...5 2 ELECTRICAL SPECIFICATION...5 2.1 INPUT REQUIREMENT... 5 2.1.1 Input voltage range... 5 2.1.2 Input frequency range... 5 2.1.3 AC inrush current... 5 2.1.4 Input current...
More informationSoldering Stations. Silver line. Fast Response. Standard Line. Active Tip. Preheating plate. FE-Soldering iron. Solder bath. max.
Soldering Stations WD WD M PUD 8 PUD 5 PU 8 supply 80 W supply 50 W supply 80 W supply 50 W supply 80 W Silver line Fast Response Standard Line WP 80 WP 0 XT soldering tips LR WSP 80 WMP NT Soldering tips
More informationAEM GcDiode TM ESD Suppressors
Part Number: ES0603V014BT, ES0402V014BT Features Glass ceramic monolithic structure Ultra low capacitance (0.25pF typical) Low leakage current (
More informationAllen-Bradley 1786-RPFRXL
Installation Instructions ControlNet Fiber-optic Ring Repeater Modules Catalog Numbers 1786-RPFRL/B, 1786-RPFRXL/B Topic Page Important User Information 2 Environment and Enclosure 3 North American Hazardous
More informationAmerican Hakko Products, Inc.
Menus and Settings Now that you have a HAKKO FX-100 Soldering Station, you may feel like you want to customize the settings of your soldering station. There are some options that may interest you and your
More information40 & 60 Watt Models. Low Leakage Current. EN61000 Compliant. Single & Multiple Outputs. Cover Kits Available
ECM40-60 40 & 60 Watt Models Small Size 2.0 x 4.0 x 1.2 Low Leakage Current Industrial & Medical Approvals Full Load Available Convection Cooled Wide Operating Temperature 0 C to +70 C Level B Conducted
More informationSILICON DESIGNS, INC Model 1221 LOW NOISE ANALOG ACCELEROMETER
SILICON DESIGNS, INC Model 1221 LOW NOISE ANALOG ACCELEROMEER SENSOR: Capacitive Micromachined Nitrogen Damped Hermetically Sealed Low Noise: 5 g/hz typical for 2g Full Scale Version Internal emperature
More informationMLVS 0402 Series Engineering Specification
MLVS 0402 Series 1. Scope This specification is applicable to Chip Metal Oxide Varistor in multilayer technology.the customer designed part number drawing take precedence over this specification. For RoHS
More informationProduct Specification
SLH Series Socket, Vertical Orientation TLH Series Terminal, Vertical Orientation See www.samtec.com for more information. Page 1 1.0 SCOPE 1.1 This specification covers performance, testing and quality
More informationUser Manual EzLogger WiFi Ver 02
User Manual EzLogger WiFi Ver 02 Table of Contents 1 Symbols..................................... 01 2 Safety...................................... 02 3 Installation...................................
More informationLCI User Manual mantracourt.com
LCI User Manual mantracourt.com LCI Load Cell Junction Box with Fault Monitor Contents Chapter 1 Introduction to the LCI... 2 Chapter 2 Installing the LCI... 3 Chapter 3 Setting up the LCI... 4 Sequence
More informationTSXPAY262 Preventa safety module - 24 V DC - standard format - < 5 W
Characteristics Preventa safety module - 24 V DC - standard format - < 5 W Main Range of product Product or component type Complementary [Us] rated supply voltage Supply voltage limits Activation threshold
More informationSuper Coaxial Micro-Plugs and Receptacles
The GigaLane s Super coaxial Micro-Plugs (SCMP) and Receptacles (SCMJ) are specially designed for Space Reduction on Circuit Boards and for Vertical Mounting on RF Boards. They have the excellent RF performance
More informationPremium Precision Soldering station
www.jbctools.com English Premium Precision Soldering station Ref. DIR-D 2 www.jbctools.com Packing List The following items should be included: DI Control Unit... 1 unit Ref. DI-1D (120V) DI-2D (230V)
More informationMRC1800H SERIES. Output. Features
DS11. MRC18H SERIES 18W TELECOM RECTIFIERS Output 33A, 48V/54V 56A, 24V/27V Features 91% efficiency including series output diode High power density 242mW/cm 3, 4.W/in 3 Power Factor Corrected to EN61-3-2
More informationArmorPoint I/O Field Potential Distributor, Series A
Installation Instructions ArmorPoint I/O Field Potential Distributor, Series A (Cat. No. 1738-FPD) The field potential distributor (Cat. no. 1738-FPD) lets you change the field power distribution source
More informationMeet requirements of USB 2.0
NEW Meet requirements of USB.0 UX Series Features 1. Certified to perform as required in USB.0 Standard Tested and certified by USB Association approved laboratory the connectors will perform at transmission
More informationAmphenol Industrial AMPHENOL SOLAR PRODUCTS 2012
AMPHENOL SOLAR PRODUCTS 2012 HELIOS H4 FULL ACCORDING NEC 2008 Although the electrical connectors attached to the ends of the module cables are finger safe when new, if they are opened under load, the
More informationLogic Analyzers. TLA Family. Ordering Information. Logic Analyzer with External Display.
Logic Analyzers TLA Family Ordering Information TLA60X Logic Analyzer with External Display. The TLA family of logic analyzers consists of the TLA600 Series and the TLA700 Series. TLA Detailed Product
More informationLCI Load Cell Junction Box with Fault Monitor
LCI Load Cell Junction Box with Fault Monitor User Manual www.mantracourt.co.uk The LCI Load Cell Failure Alarm Manual Chapter 1 Introduction to the LCI...2 Chapter 2 Installing the LCI...3 Figure 2.1
More informationOnwards and Upwards, Your near space guide Overview of the NearSys Two Sensor Temperature Array Figure 1. A complete Two Sensor Temperature Array
The NearSys Two Sensor Temperature Array is a kit that permits a BalloonSat to measure two separate temperatures. When plugged into a flight computer like the BalloonSat Mini, the flight computer provides
More informationFigure 1. A complete Temperature Sensor
The NearSys Temperature Sensor is a kit that permits a BalloonSat to measure the temperature of the air, interior, or object the sensor itself is placed in contact with. When plugged into a flight computer
More informationFlomatic Smart Card TM Model FDHC-100 (Digital High-Resolution Controller) Configuration and Operation Manual
The Flomatic FDHC-100 is a high performance Digital positioner intended to control AC actuators, providing 450 points of resolution with quarter turn actuators ranging from 2 sec to 120 sec and rated for
More informationMini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard
NEW Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard UX60S Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features. USB 2.0 Standard data transmission
More informationEH-RIO IP67 Profibus-DP I/O modules
Installation Instructions EH-RIO IP67 Profibus-DP I/O modules (RIO-PBXDP8M12, -PBXDP8M8, -PBYTP8M12, -PBYTP8M8, -PBXYP8M12, -PBXYP8M8) M12 Style Connectors M8 Style Connectors 43819 The EH-RIO IP67 Profibus-DP
More information500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide Zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 5% Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC
More informationSMART HEATSINKS UNIVERSAL MOUNTABLE, AUTO-ALIGN HEAT SINKS
SMART HEATSINKS UNIVERSAL MOUNTABLE, AUTO-ALIGN HEAT SINKS Smart Heatsinks, Inc. introduces an innovation in SMT or THMT heat sinks to meet the needs of newer higher power semiconductors. The heat sinks
More informationSKY33108: BAW GHz WiFi Pass/ GHz WiMAX Reject Filter
preliminary data sheet SKY3318: BAW 2.4 2.473 GHz WiFi Pass/ 2.495 2.69 GHz WiMAX Reject Filter Applications l 2.5 GHz WiMAX PCMCIA cards USB dongles CPE Notebook and ultra mobile PC Pico and Femto base
More informationSpecification For 90 Watts Adapter Power Supply Model No: ADB002 Customer ID: 000G Revision: 4.0
Specification For 90 Watts Adapter Power Supply Model No: ADB002 Customer ID: 000G Revision: 4.0 Prepared By: Terry Liou Approved By: Jacky Chi PAGE 1 E. C. List 1.0 Original 2.0 Modify 8.3 Weight 3.0
More informationHARTING. Interface Connectors. People Power Partnership
11 5 HARTING Interface Connectors People Power Partnership Directory chapter 00 Modular metric high speed connectors, 2.0 mm pitch Page connector system general information......................... 00.04
More information500mW, 2% Tolerance Zener Diodes
500mW, 2% Tolerance Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 2% Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC Halogen-free
More informationONYX 32 MULTIFUNCTIONAL POSITIONING AND SOLDERING SYSTEM
ONYX MULTIFUNCTIONAL POSITIONING AND SOLDERING SYSTEM MACHINES.0 APPLICATION: SMT ZEVAC-LINE: ONYX The complete ONYX product line documentation is composed of the following data sheets: MACHINES.0 ACCESSORIES.0,.0
More informationThese are the illustrated step-by-step guidelines for upgrading your Quad 306 with the Dada Electronics upgrade-kit.
Quad 306 DIY illustrated guidelines version 1.1 These are the illustrated step-by-step guidelines for upgrading your Quad 306 with the Dada Electronics upgrade-kit. We will replace all electrolytic capacitors,
More informationMPM-U653-DCF-B M/N: MPM-U653-DCF-B. 650W Medical AC / DC SPECIFICATION FOR SWITCHING POWER SUPPLY. Revision History
SPECIFICATION FOR SWITCHING POWER SUPPLY M/N: Revision History Version Date Change Items Rev. 1.0 July.21. 2017 Established. Page 1 Models & Ratings FEATURES 650W medical power supply with force air cooling.
More informationMPI TS150-THZ 150 mm Manual Probe System
MPI TS150-THZ 150 mm Manual Probe System Industry s first explicitly designed probe system for accurate measurements at mm-wave and sub-mm wave (THz) frequency range FEATURES / BENEFITS Variety of Applications
More information*Note: Operation beyond this range is possible, but has not been characterized. PART. Maxim Integrated Products 1
19-8; Rev ; 2/ EVALUATION KIT AVAILABLE 8MHz to MHz Variable-Gain General Description The MAX6 general-purpose, high-performance variable-gain amplifier (VGA) is designed to operate in the 8MHz to MHz
More informationEMOSAFE EN-100 Network Isolators for PCB assembly
ENGLISH EMOSAFE EN-100 Network Isolators for PCB assembly Product Datasheet 1 FEATURES AND ADVANTAGES Suitable for PCB assembly: pluggable or solderable Ultra-compact Conforms to IEC 60601-1 10/100/1000
More informationDTC P0AA6 - High Voltage Isolation Fault
DTC P0AA6 - High Voltage Isolation Fault Product Family Orion BMS [Original] (24-180 Cell) Orion BMS 2 (24-180 Cell) Orion JR (16 Cell) Fault Supported YES YES NO FAULT DESCRIPTION This code is set when
More information