LED DRIVERS. CLi15 (15 watt) 1-10V. 0-10V / 1-10V Analogue Dimmable

Transcription

1 REV 1 LED DRIVERS CLi15 (15 watt) 0-10V / 1-10V Analogue Dimmable 15W (up to 1050mA) Harvard are pleased to launch the exciting new CLi LED driver range. These twin stage products employ the latest advanced technology delivering exceptional performance, flexibility and reliability. Slim and compact, they offer deep dimming, programmability, expandability and fastest time to market, even for bespoke products. With exceptionally low flicker over the full operating range, these drivers are suitable for the most demanding applications. Small - Fits through a 40mm hole Support for most COB modules/lamps up to 2000 lumens (typical) Support for 1-18 LEDs Isolated output Programmable current at Harvard or customer site Smooth logarithmic dimming to 0.1% Low inrush current Exceptionally low LED flicker. Near perfect light quality Passes IEEE1789:2015 at any operating point Designed for Health and Wellbeing/Human Centric Lighting Equals or exceeds the efficiency of many single stage designs Power Factor corrected 1050mA maximum LED current. 1400mA version due Q2/2018 Wireless version using Harvard EyeNut dimming control is available IOT, dimming and programming options are available via the interface connector. Please enquire Bespoke requirements: Please enquire Designed and Manufactured in the U.K Product Technical Description Highlights Fully programmable in 1mA step increments Less than 1% flicker at 100Hz/120Hz - Meets IEEE1789:2015 No Effect Region 1Hz to greater than 2kHz at any operating point Minimum dimming of 1mA - 25 bit dimming resolution Small size 21mm x 39.5mm x 133mm (149mm remote version) Input voltage range V (CLi15) Remote mount version (order end clamps separately) 50,000 hour 80 C case temperature Extensive hot plug protection (low output capacitance and additional software protection features) Less than 500mW mains power (DTO option) Up to 85% efficiency Power factor corrected (0.97) Operation up to 50 C ambient Supports a large LED string voltage range, 2V to 38V or 4.5V to 52V (model dependent) Self-resetting thermal trip Mains to LED output: Reinforced isolation 3kV 0-10V/1-10V to Mains: Refinforced isolation 3kV 0-10V/1-10V to LED output: Reinforced isolation 3kV 100% - 0.1% dimming DTO (Dim to off option) Linear dimming option Surge protection 2kV Differential, 4kV Common mode 1-10V analogue dim

2 Technical Specification Mains input voltage DC input voltage Mains frequency 15W 220 to 240VAC Nominal V Nominal / V Operational range 0/50/60Hz 100/120 Hz ripple <1% Flicker Mains surge protection Input-output isolation Mains inrush current Number drivers per MCB (maximum typical) Output protection Hot plug protection features Input current THD IEEE1789:2015 compliant with NO RISK category 4kV common-mode 2kV differential-mode 3kV AC rms 25A peak decaying to zero over 30µS (0.1R + 100µH mains impedance) B6 B10 B16 C6 C10 C Overvoltage, short, reverse polarity. Auto re-start low output capacitance <9µF, current limiting and software restart features 8% full load Mains harmonics IEC/EN Class C limit, Table 2 Touch Current (LED output) 0.28mA (spec limit is 240V mains EN60990 Touch Current (0-10V/1-10V) 50µA Humidity EMC emissions DTO mains power Cold start-up time 85% max non-condensing Meets EN55015:2013. Conducted (9kHz-30MHz), Radiated (30MHz-300MHz) <0.5W 250ms typical Off load voltage <58V Ambient temperature range -25 C to 50 C Maximum Tc temperature 80 C Dimming range Dimming method Terminal blocks Enclosure % (1mA Minimum) Linear amplitude dimming (No PWM dimming) 45 o Push fit connectors, Input: 7mm pitch, Output/DALI: 3.5mm pitch White polycarbonate UL94-V0 rated Wire size 0.2mm 2 to 1.5mm 2 Case Style Dimensions Weight Box Quantity IP Rating Integral 133.3mm x 21mm x Ø39.5mm 92g TBC N/A With cable clamps 149mm x 21mm x Ø39.5mm 100g TBC IP40 Operation *Drivers are suitable for DC & AC operation at 0/50/60 Hz and compliant to EN The operation is compliant to EN except with the high risk task lighting applications.

3 Insulation classes for isolated circuits CLi analogue model isolation barrier definition 0-10V 1-10V LED Output Plus JST Terminal (If fitted) Mains Operating Range (undimmed) CLi15-A CLi15-A02-240

4 Efficiency (CLi15-A01-240/500) Power Factor (CLi15-A01-240/500) CLi15-A01-240/1050 Driver Lifetime with Temperature at Full Load

5 Variants Part number Programmable Current Range LED String Voltage Max. Tc Temperature Ambient Temperature Range Thermal Trip (Self - resetting) Maximum Power Power factor at full load Efficiency at full load CLi15-A01-240/xxxx CLi15-A02-240/xxxx mA* (±5) mA* (±5) 2.5V to 38V 80 C C 100 C 15W % 4.5V to 52V 80 C C 100 C 15W % # To order, customer replace xxxx with the required LED current in ma Order Examples: CLi15-A01-240/1050, CLi15-A02-240/350 *Minimum dimmed current is 1mA Dimensions Integral style Cable clamps (remote) style For remote mount, cable clamps are required Order CLi15 clamp kit part number: SA-MF23-1-A Compliance Designed to meet the following: Approval CE (Europe) ENEC (Europe) CB (International) RCM (Australia/NZ) BIS (India) CB Scheme EL Standards LVD:2014/35/EU, EMC:2014/30/EU, RoHS:2011/65/EU, ECOD/2009/125/EC EN :2015, EN A1:2017+ANNEX J IEC :2015, IEC A1:2016+ANNEX J ASNZS :2016, ASNZS :2013, ASNZS-CISPR22+A1, ASNZS4417.1:2012 IS (Part 2/Sec.13) Amd