Appendix A. Appendix A: Miscellaneous Pin-Pair Diagrams
|
|
- Howard McKenzie
- 6 years ago
- Views:
Transcription
1 Appendix A Appendix A-E contains additional technical data, ordering information, and lists of reference materials. Appendix A illustrates miscellaneous pin-pair diagrams. A-
2 Appendix A. Octopus Cables and Connecting Hardware Pinout Tables Table A-: H7-M/MA, H07-M, and BNR Octopus Cable to 0-Pin Patch Panel Pinout 0-Pin Telco 0-Pin Telco NC NC NC NC Pin Telco 0-Pin Telco 8 NC NC NC NC Note: NC = No connection. A-
3 Table A-: H7-M/MA, H07-M, and BNR Octopus Cable to 0-Pin Patch Panel Pinout (Cont.) 0-Pin Telco 0-Pin Telco NC NC NC NC Pin Telco 0-Pin Telco NC NC NC NC Note: NC = No connection. A-
4 Appendix A. Octopus Cables and Connecting Hardware Pinout Tables H7-LA/LB/LE Connector Pinout EIA/TIA-8 (T8A) Figure A-. H7-LA/LB/LE Connector Pinout EIA/TIA-8 (T8A) Rear View H7-LC/LD/LF Connector Pinout EIA/TIA-8 (T8B) Figure A-. H7-LC/LD/LF Connector Pinout EIA/TIA-8 (T8B) Rear View A-
5 Appendix A. Octopus Cables and Connecting Hardware Pinout Tables Table A-: BNK 0-Pin to -Pin Equipment Cable Pinout 0-Pin Connector P P- P- P- P-7 P- P-9 P- P-0 P-7 P- P-8 P- P-0 P- P- P- P- P-8 P- P-9 P- P- P-7 P- P-9 P- P-0 P- P- P-7 P- P-8 -Pin Connector P P- P-9 P- P-0 P- P- P- P- P- P- P- P- P-7 P- P-8 P- P-9 P-7 P-0 P-8 P- P-9 P- P-0 P- P- P- P- P- P- P- P- Line Signal Name Insulation Color Twisted-pair Transmit+ Transmit- Receive+ Receive- Transmit+ Transmit- Receive+ Receive- Transmit+ Transmit- Receive+ Receive- Transmit+ Transmit- Receive+ Receive- Transmit+ Transmit- Receive+ Receive- Transmit+ Transmit- Receive+ Receive- Transmit+ Transmit- Receive+ Receive- Transmit+ Transmit- Receive+ Receive- Blu/Wht Wht/Blu Org/Wht Wht/Org Grn/Wht Wht/Grn Brn/Wht Wht/Brn Slt/Wht Wht/Slt Blu/Red Red/Blu Org/Red Red/Org Grn/Red Red/Grn Brn/Red Red/Brn Slt/Red Red/Slt Blu/Blk Blk/Blu Org/Blk Blk/Org Grn/Blk Blk/Grn Brn/Blk Blk/Brn Slt/Blk Blk/Slt Blu/Yel Yel/Blu A-
6 Appendix A. Octopus Cables and Connecting Hardware Pinout Tables Table A-: BNL -Pin MMP to 0-Pin Equipment Cable Pinout -Pin MMP Position -Pin MMP 0-Pin Telco Pin -Pin MMP Position -Pin MMP 0-Pin Telco # 7 8 # # 9 0 # 7 8 # #7 9 0 # 0 7 # A-
7 Appendix A. Octopus Cables and Connecting Hardware Pinout Tables Table A-: BNN 8-Pin MP to -Pin Equipment Cable Pinout 8-Pin MP Position 8-Pin MP Pin -Pin Telco Pin 8-Pair Color Code 8-Pin MP Position 8-Pin MP Pin -Pin Telco Pin 8-Pair Color Code # 9 0 Wht/Org Org/Wht Wht/Grn Grn/Wht # Wht/Org Org/Wht Wht/Grn Grn/Wht # Wht/Org Org/Wht Wht/Grn Grn/Wht # 9 0 Wht/Org Org/Wht Wht/Grn Grn/Wht # Wht/Org Org/Wht Wht/Grn Grn/Wht #7 Wht/Org Org/Wht Wht/Grn Grn/Wht # 7 8 Wht/Org Org/Wht Wht/Grn Grn/Wht #8 Wht/Org Org/Wht Wht/Grn Grn/Wht Table A-: H0-A -Pin to 0-Pin Adapter Pinout -Pin D-Connector 0-Pin D-Connector -Pin D-Connector 0-Pin D-Connector A-7
8 Appendix A. Octopus Cables and Connecting Hardware Pinout Tables Table A-: BC9P 9-Pin D-Sub to -Pin D-Sub (Modem) Out-of-Band Management Cable for DEChub 900 MultiSwitch Signal Name DB9 (Female) DB (Male) Received line signal detect Received data Transmitted data DTE ready Signal common DCE ready Request to send/ready for receiving Clear to send Ring indicator Shield* * The cable shield must be tied to the metal connector housing at the DB9 on both ends. The shield must not be connected to any other signal in the cable. Table A-7: BC9Q 9-Pin D-Sub to 9-Pin D-Sub (PC) Out-of-Band Management Cable for DEChub 900 MultiSwitch Signal Name DB9 (Female) DB9 (Female) Received line signal detect Received data Transmitted data DTE ready Signal common DCE ready Request to send/ready for receiving Clear to send Ring indicator Shield* NC * The cable shield must be tied to the metal connector housing at the DB9 on both ends. The shield must not be connected to any other signal in the cable. A-8
9 Figure A-. H-A/B/D Figure A-. H-E/F Figure A-7. H-A Shield Figure A-. H-IV/JV (T8B) Figure A-8. 8-Pin MP to 8-Pin MP Office Cable (Crossover with Pin/Pair Diagram (BNF) Figure A-. H-GV/HV (T8A) Figure A-9. 8-Pin MP to 8-Pin MP Office Cable (Noncrossover with Pin/Pair Diagram (BNK) A-9
10 Figure A-0. BNS Office Cable Figure A-. Shielded 8-Pin MP to 8-Pin MP Office Cable with Crossover (BNN) Figure A-. BNH Office Cable Figure A-. -Pin MMP to 8-Pin MP Office Cable (Crossover) with Pin/Pair Diagram (BNH) Figure A-. 8-Pin MP to 8-Pin MP Shielded Figure A-. 0 Punchdown to 8-Pin MP (BNU) Equipment/Office Cable (BNM) Figure A-. Shielded 8-Pin MP to 8-Pin MP Figure A-7. 0 Punchdown to 0 Punchdown Office Cable Without Crossover (BNL) (BNV) A-0
11 Figure A-8. -Pin MMP to 8-Pin MP Cable Figure A-. -Pin MMP to 8-Pin MP Assembly with Pin/Pair Diagram (BCU) Equipment Cable with Pin/Pair Diagram (BNJ) Figure A-9. -Pin MMP to -Pin MMP Terminal Interconnection Cable with Pin/Pair Diagram (BCE) Figure A-0. 8-Pin MP to 8-Pin MP EIA/TIA 00BaseTX, Category Data Grade Equipment Cable with Pin/Pair Diagram (BNG) A-
12 Figure A-. UTP and screened (DTE to DTE) crossover cables for 0BaseT, 00BaseTX, and 00BaseT A-
13 Figure A-. Pinout for BNU Cable A-
14 Figure A-. Wiring Diagram for BCV-0, BC9V-0 Cables A-
15 Figure A-. Wiring Diagram for BC9E-0 Cable A-
16 Figure A-. Wiring Diagram for BC9B-0 Cable A-
17 Figure A-7. Wiring Diagram for BC9A-0 Cable Figure A-8. Wiring Diagram for BC9C-0 Cable A-7
18 Figure A-9. 0-Pin to -Pin D-Sub (BCF) Cable A-8
19 Figure A-0. 0-Pin to -Pin D-Sub (BCG) Cable A-9
20 Figure A-. 0-Pin to 7-Pin D-Sub (BCH) Cable A-0
21 Figure A-. 0-Pin to -Pin D-Sub (BCJ) Cable A-
22 Figure A-. 0-Pin to 7-Pin D-Sub (BCK) Cable A-
23 Figure A-. 0-Pin to -Pin D-Sub (BCL) Cable A-
24 Figure A-7. 8-Pin MP to -Pin MMJ Adapter (H88-AC) Figure A-. EIA--A to EIA--D Adapters (H87-A/B, H87-D) Figure A-8. Male to Female -pin D-Sub with EOS/ESD Protection (H88-AA) Figure A-. 8-Pin MJ to DB Modem Adapter (H88-AC) Figure A-9. 9-Pin Female D-Sub to -Pin MMJ (for PC Serial Printer Port (H87-J) A-
25 Figure A-0. Male to Female -Pin D-Sub with EOS/ESD Protection (H88-AA) Figure A-. 9-Pin Female D-Sub to -Pin MMJ (for PC Serial Printer Port (H87-J) A-
26 A-
MCN Monitoring and Control Network Comparator Display System. Input/Output Interface Module IIB Hardware Reference Manual
MCN Monitoring and Control Network Comparator Display System Input/Output Interface Module IIB Hardware Reference Manual S2-60400-115 FCC Statement This equipment has been tested and found to comply with
More informationInstallation Handbook
Installation Handbook Copyrights This manual and the software accompanying it are copyrighted 2009-2016 by Interalia Inc. XMU+ Installation Handbook 18-IG-000-002-07-EN-85 All rights reserved. No part
More informationUsed in conjuction with UM
Your Partners in Network Alarm Management Visit our website at www.dpstelecom.com for the latest PDF manual and FAQs. July 19, 2001 UM00C.30240 Firmware: 2.1-2.5 Used in conjuction with UM006.12201 Revision
More informationCOMPUTER ENGINEERING AND INFORMATION TECHNOLOGY DEPARTMENT NETWORK LABORATORY. Ethernet Cabling
Experiment number :(1) Ethernet Cabling Introduction:- The EIA/TIA (Electronic Industries Association and the newer Telecommunications Industry Alliance) is the standards body that creates the Physical
More informationHorizon HX Wiring Supplement
Horizon HX Wiring Supplement Revision A3-8/2/2016 For units shipped after January 8, 2013 Applies to single or multi-display systems with single or dual AHRS and the following Wiring Harness Part Numbers:
More informationDAS3 Series IP-DSLAM System Installation Guide
Class: User Guide Product Name: DAS3 Series Product Version: H.W. 7.0 Doc. No.: BCD3-TM-E-120503 Doc. Version: 2.0 Publish Date: 2008-10-02 THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN
More informationModel 200-Series Accessories Installation & Configuration Guide
Guide Table of Contents 5-Pin Headset Connector Assembly (Order Code: 13579)............... 2 6-Pin Headset Connector Assembly (Order Code: 13595)............... 3 7-Pin Headset Connector Assembly (Order
More informationCable Pinouts. SRP I/O Module
Cable Pinouts A This appendix lists the cables and connector pinout assignments for the cables used with the ERX-7xx models and ERX-14xx models. Topic Page SRP I/O Module A-1 CT1 and CE1 I/O Modules A-4
More informationAppendix A Cable Pinouts
Appendix A Cable Pinouts This appendix lists the cables and connector pinout assignments for the cables used with the ERX-7xx models and ERX-14xx models. Topic Page SRP I/O Module 163 CT1 and CE1 I/O Modules
More informationRS-232 Connector Pin Assignments
APPENDIXB This appendix lists the connector pin assignments for the CDEs, and includes the following sections: Serial Console-Interface, page B- Ethernet, page B- Cable Pin Assignments, page B- Serial
More informationSmall Products Technical Manual for Powered and Passive Plates
Small Products Technical Manual for Powered and Passive Plates Part # Page StudioHub+ Standard Pinout Illustration 1 Active (Powered) MatchJacks MatchJack Preamp, Input MJ-IN 2 MatchJack Preamp, Output
More informationConnector and Cable Specifications
APPENDIX B This appendix describes the pinouts and cabling requirements for the interfaces and cables used on the Cisco ubr925 cable access router. All connectors for these interfaces are on the rear-panel,
More informationCable and Port Specifications
Send documentation comments to mdsfeedback-doc@cisco.com APPENDIXC This appendix includes the cables and connectors used with the Cisco MDS 9100 Series Fixed Configuration Fabric Switch, and it includes
More informationME778C-RJ45 MAIN MODULE (FRONT CARD) MAIN MODULE. Line: RJ-45. Line: RJ-45 INTERFACE MODULE (REAR CARD) Serial: 10-Pin RJ.
ME778C-RJ45 Line: RJ-45 MAIN MODULE Mini Driver MP Card ME778C-RJ45 Power Line: RJ-45 Unit A -TD -RD -CD -TD Serial: 10-Pin RJ INTERFACE MODULE (REAR CARD) Unit B -RD -CD Serial: 10-Pin RJ LO Z A HI Z
More informationTwisted-Pair Cabling; Crossover Cables. Wiring standards for Ethernet cables using twisted-pair wires; Making and testing cables
Twisted-Pair Cabling; Crossover Cables Wiring standards for Ethernet cables using twisted-pair wires; Making and testing cables UTP and STP UTP Unshielded Twisted Pair; four pairs are bundled in a plastic
More informationFastHub Ports and Cabling Information
APPENDIX B FastHub Ports and Cabling Information This appendix contains useful information about using the FastHub in Ethernet networks and contains the following sections: FastHub Port Specifications
More informationFrame Relay Cabling This section describes the cabling and connector pinouts for the Frame Relay cards.
A P P E N D I X B Cabling Summary Introduction This appendix contains details on the MGX 8850 cabling. Note In all cable references, the transmit direction is away from the switch, and the receive direction
More informationE1 and T1 RJ-48 Cable Pinouts on page 208. Fast Ethernet 12-port Cable Pinouts on page 211
Appendix A This chapter contains tables that list the pinouts for the following cable connectors on the router: RJ-45 Connector Pinouts for the Ethernet Management Port on page 207 DB-9 Connector Pinouts
More informationictalk Operations Guide
ictalk Operations Guide August 21, 2013 ictalk Smart Projectors Ocean Sonics Ltd. Hill House, 11 Lornevale Road, Great Village, NS, B0M 1L0 Canada Phone: +1 902 655 3000 www.oceansonics.com Table of Contents
More informationNote: For BANDIT II, BANDIT III, or VSR-1200 specifications, see the BANDIT II, BANDIT III, and VSR-1200 Document Set. Function
Appendix A Specifications This appendix lists the specifications for the BANDIT family of products. Note: For BANDIT II, BANDIT III, or VSR-1200 specifications, see the BANDIT II, BANDIT III, and VSR-1200
More informationConnector and Cable Specifications
APPENDIX B This appendix describes the Catalyst 3550 switch ports and the cables and adapters that you use to connect the switch to other devices. Connector Specifications These sections describe the connectors
More informationCable Specifications. Interface Specifications. Fiber-Optic Specifications APPENDIXB
APPENDIXB This appendix lists the cable specifications for supported modules on the Cisco 7600 series router. The following signal summaries are contained in this appendix: Interface Specifications, page
More informationCommunication Wiring Color Codes
Communication Wiring Color Codes Cat 5 & 5e Network Color Codes for RJ-45 Ethernet Plug Eight-conductor data cable (Cat 3 or Cat 5) contains 4 pairs of wires. Each pair consists of a solid color wire and
More informationCables and Connectors
Module 2 Cables and Connectors Twisted Pair Two wires that carry the data signals (one conductor carries a positive signal; one carries a negative signal). Two wires are twisted to reduce the effects of
More informationCable and Port Specifications
APPENDIXC This appendix provides cable and port specifications, and includes the following sections: Cables and Adapters Provided, page C-1 Console Port, page C-2 COM1 Port, page C-3 MGMT 10/100/1000 Ethernet
More informationPreparing to Install the Cisco AS5350XM Universal Gateway
CHAPTER 2 Preparing to Install the Cisco AS5350XM Universal Gateway This chapter describes the tasks you must perform before you begin to install the Cisco AS5350XM universal gateway and includes the following
More informationUSER MANUAL MODEL 2017P MODEL 2017P60. RS-232 to 20mA and. RS-232 to 60mA Current Loop Converters
USER MANUAL MODEL 2017P RS-232 to 20mA and MODEL 2017P60 RS-232 to 60mA Current Loop Converters 07M2017P-E Doc# 073051UE Revised 5/7/96 SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 1.0
More informationInstalling the Cisco 2524 and Cisco 2525 Routers
CHAPTER 3 Installing the Cisco 2524 and Cisco 2525 Routers This chapter guides you through the installation of the Cisco 2524 and Cisco 2525 routers and includes the following sections: Required Tools
More informationDB9 Microdriver CUSTOMER SUPPORT INFORMATION JULY 1994 ME792A ME793A ME794A
JULY 1994 ME792A ME793A ME794A DB9 Microdriver Microdriver S/N CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX FREE technical support,
More informationTELSEC RM/WM Models 800, 1500 & 2000 (TL1 Version with 100Mb Ethernet and Modbus Support) User s Manual
TELSEC RM/WM Models 800, 1500 & 2000 (TL1 Version with 100Mb Ethernet and Modbus Support) COPYRIGHT NOTICE Copyright 2016 by Quest Controls Inc. (QUEST). The material discussed in this publication is the
More informationTIA/EIA 568A Sub-system HORIZONTAL CABLING
TIA/EIA 568A Sub-system HORIZONTAL CABLING Horizontal Cabling WA 100(120)Ω CAT 3 TP TP 100(120)Ω CAT 5 150Ω STP-A 62.5(50)/125µ FIBER HC/FD WA Horizontal Media Considerations UTP/FTP Consider bandwidth,
More informationHARDWARE & INSTALLATION GUIDE
3604-4181_11_ACS_Ser ACS SERVO HARDWARE & INSTALLATION GUIDE ACS Actuator Control Solutions Servo Drive/Controller and Motors LINEAR SOLUTIONS MADE EASY 3800 County Road 116, Hamel, MN 55340 Phone: 763.478.8000
More informationicontrol 2 Opto Input Interface Card Replacement
Instruction Sheet P/N 1610834 02 icontrol 2 Opto Input Interface Card Replacement This instruction sheet is to help guide the procedure needed to replace the icontrol 2 opto-input interface card. WARNING:
More informationConnector and Cable Specifications
APPENDIX B This section describes the Catalyst 4224 Access Gateway Switch ports and the cables and adapters used to connect the switch to other devices. This section includes the following topics: Console
More informationAppendix C. Datum Systems PSM-4900 Satellite Modem. Cabling Specifications
DATUM SYSTEMS Appendix C Datum Systems PSM-4900 Satellite Modem Cabling Specifications PSM-4900 VSAT / SCPC - Cabling Specifications Revision History Rev 1.0 6-10-2000 Preliminary Release. Rev 1.1 8-1-2000
More informationAXIMA 2000/4000 Installation Manual
AXIMA 2000/4000 Installation Manual P/N 400266-00 Rev.: A2 Date: October 31, 1997 1997 EMERSON Motion Control. All Rights Reserved. P/N 4002 AXIMA 2000/4000 Installation Manual Information furnished by
More informationME930C-RJ11 MAIN MODULE (FRONT CARD) MAIN MODULE. Line: RJ-11 INTERFACE MODULE (REAR CARD) Serial: DB25 CONN. SW1 RJ-11 CONN.
ME930C-RJ11 Line: RJ-11 ME930C-RJ11 MAIN MODULE Power -TD -RD INTERFACE MODULE (REAR CARD) TEST -Cntrl In -Cntrl Out Serial: DB25 CN. 7 8 SW1 JB2 1 2 3 RJ-11 CN. JB3 INTERFACE MODULE (REAR CARD) 1 2 3
More informationAuxiliary Port, Console Port, and Adapter Pinouts for Cisco 1000, 1600, 2500, 2600, and 3600 Series Routers
Auxiliary Port, Port, and Adapter Pinouts for Cisco 1000, 1600, 2500, 2600, and 3600 Series Routers Document ID: 46789 Contents Introduction Prerequisites Requirements Components Used Conventions Auxiliary
More informationCAB-X21MT and CAB-X21FC Serial Cable Specifications
CAB-X21MT and CAB-X21FC Serial Cable Specifications Contents Introduction Prerequisites Requirements Components Used Conventions X.21 Speed and Distance Limitations CAB-X21MT Serial Cable and Assembly
More informationSelect a Data Communication Interface
Printer Setup and Operation Select a Data Communication Interface Select a Data Communication Interface You may connect your print engine to a computer using one or more of the available connections. The
More informationUSER MANUAL. MODEL 1000P Non-Powered Short Haul Modem. SALES OFFICE (301) TECHNICAL SUPPORT (301)
USER MANUAL MODEL 1000P Non-Powered Short Haul Modem C E R T I F I E D An ISO-9001 Certified Company Part #07M1000PA Doc. #022031UA Revised 2/17/98 SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007
More informationAxes Pairing Overview
Axes Pairing Overview For the most part, this document pertains to all versions of CNC10 although some features discussed are available only in CNC10v 2.63 and above. For differences between your version
More informationModel 282 Total Interface Isolation Module Reference Manual Rev. A Print Table of Contents 1.0 General Description 2.
Page 1 of 5 Model 282 Total Interface Isolation Module Reference Manual 0315-0169 Rev. A Print 08.01.01 1.0 General Description Table of Contents 2.0 Specifications 2.1 Interface 2.2 Connectors 2.3 Isolation
More informationMiniature Asynchronous 4-Wire High Speed Modems
ME1862A-F ME1863A-F JULY 2003 ME1862A-M ME1863A-M Miniature Asynchronous 4-Wire High Speed Modems CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
More informationLow Profile Hub. User Manual
16 + 2 Low Profile Hub User Manual 1 Contents One Introduction 2 Two Installation 3 Front Panel Connecting Ports LEDs Three Configuration and Installation Guidelines 5 Hub/Network Configuration Ports and
More informationTable 8 shows the pin configuration and function of a standard computer-to-printer parallel cable. Table 8 Parallel Cable Pin Configuration
Advanced Printer Inion Parallel Data Port Parallel Data Port The parallel data interface supports IEEE 1 bidirectional parallel communications in nibble mode. The parallel interface provides a means of
More informationStorage/Control I/O Module
CHAPTER 4 The performs two functions: to connect outside interfaces to the system controller and to house the hard disk drive. It plugs into the back of the VCO/4K system and provides the I/O interfaces
More informationDECserver 900TM INSTALLATION
DECserver 900TM INSTALLATION LKG 0-9I The DECserver 900TM is a -port network access server that connects asyn chronous devices, including terminals, printers, modems, or PCs to an Ethernet local area network
More informationOverview of the Cisco 2524 and Cisco 2525 Routers
CHAPTER 1 Overview of the Cisco 2524 and Cisco 2525 Routers The Cisco 2524 and Cisco 2525 routers provide LAN and WAN access in a low-cost modular router platform that can grow with your internetworking
More informationDigital Ethernet Multiport Office Network Repeater Installation Information
Digital Ethernet Multiport Office Network Repeater Installation Information Order Number: EK-DEMON-IN. A01 Digital Equipment Corporation Maynard, Massachusetts FCC NOTICE: This device complies with Part
More informationCisco ASR 1000 Series Router Specifications
Cisco ASR 000 Series Router Specifications This appendix provides router specifications and cable assemblies and pinouts for the cables shipped with the Cisco ASR 000 Series Aggregation Services Routers.
More informationSection 1.1: Networking Overview
Section 1.1: Networking Overview This section provides an introduction to networking. Students will become familiar with the following aspects of a network: Components of a network o Computers o Transmission
More informationUSER MANUAL. MODEL 1018 High Speed Short Range Modem w/ Extra Controls SALES OFFICE (301) TECHNICAL SUPPORT (301)
USER MANUAL MODEL 1018 High Speed Short Range Modem w/ Extra Controls Part# 07M1018-B Doc# 013021UB Revised 11/3/95 SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 1.0 WARRANTY INFORMATION
More informationCAB 449MT and CAB 449FC EIA/TIA 449 Serial Cable Specifications
CAB449MT and CAB449FC EIA/TIA449 Serial Cable Specifications Document ID: 46801 Introduction Prerequisites Requirements Components Used Conventions EIA/TIA449 Speed and Distance Limitations Serial Cable
More informationConnector and Cable Specifications
Connector Specifications, page 1 Console Port, page 3 Cables and Adapters, page 3 Connector Specifications 10/100/1000 Ports (Including PoE) All 10/100/1000 ports use standard RJ-45 connectors and Ethernet
More informationGE Fanuc IC695ETM001. Rx3i PacSystem
GE Fanuc IC695ETM001 http://www.pdfsupply.com/automation/ge-fanuc/rx3i-pacsystem/ic695etm001 Rx3i PacSystem Ethernet module 10/100 Mbits 2 RJ45 connections one IP address IC695E IC695ET IC695ETM 919-535-3180
More informationPrepared By: Eng. Wasan Fraihat
Objectives Taibah University College of Computer Science & Eng. Computer Engineering Department Computer Networks Laboratory CN332 Lab. 1 Cabling & Packet Sniffing Prepared By: Eng. Wasan Fraihat 1. To
More informationContents. One Introduction 2. Two Installation 3 Front Panel 10base-T Ports 10/100base-TX Ports LEDs
Contents One Introduction 2 Two Installation 3 Front Panel 10base-T Ports 10/100base-TX Ports LEDs Three Configuration and Installation Guidelines 7 Hub/Network Configuration Ports and Connectors Typical
More informationCisco ASR 1001-X Router Specifications
Cisco ASR 00-X Router Specifications This appendix provides the Cisco ASR 00-X Router specifications. Cisco ASR 00 Router Specifications, page Cisco ASR 00 Router Specifications, page Cisco ASR 00 Router,
More informationCisco - Ethernet 100BaseTX and 10BaseT Cables: Guidelines and Specifications
Page 1 of 8 Ethernet 100BaseTX and 10BaseT Cables: Guidelines and Specifications Contents Introduction Prerequisites Requirements Components Used Conventions Which Cable Do I Need? Ethernet Cabling Guidelines
More informationME758C-RJ45 MAIN MODULE (FRONT CARD) MAIN MODULE. Line: RJ-45 INTERFACE MODULE (REAR CARD) Serial: DB25 RJ45 CONN. INTERFACE MODULE (REAR CARD)
ME758C-RJ45 Line: RJ-45 MAIN MODULE Multi- Function LD Card ME758C-RJ45 Power -TD -RD INTERFACE MODULE (REAR CARD) -RTS -CD Serial: DB25 TEST - Remote 511E -ERROR Analog 511 This switch is on the bottom
More informationThe specifications for the Cisco 7304 router are listed in Table A-1.
APPENDIX A This appendix provides system and component specifications for the Cisco 7304 router. The following topics are found in this appendix: System, page A-1 Processor and Memory and Configurations,
More informationEXTENDER 6000 / 7000 CABLES & CONNECTORS
EXTENDER 6000 / 7000 CABLES & CONNECTORS This document outlines the cables required for the installation of the Citel EXTenders (6000, 7000) 1 CABLE: 9 M-F Straight Through Serial Cable, All pins straight
More informationMC-Link with Ethernet/IP Interface User Manual
MC-Link with Ethernet/IP Interface User Manual This document applies to the following controllers: B8050-ML-IP 2012 NTI AG This work is protected by copyright. Under the copyright laws, this publication
More informationUSER MANUAL MODEL KiloModem II AC Powered, High-Speed X.21 Short-Range Modem
USER MANUAL MODEL 1075 KiloModem II AC Powered, High-Speed X.21 Short-Range Modem C E R T I F I E D An ISO-9001 Certified Company Part #07M1075-B Doc: 054081U, Rev. C Revised 1/23/08 SALES OFFICE (301)
More informationInstallation and Setup
1 2 Setup In This Chapter.... Installing the Ethernet Base Controller EBC Network Identifiers Setting the Node Address 10BaseT / 100BaseT Network Cabling Maximum 10BaseT / 100BaseT Cable Length Specifications
More informationCommunications Products Division. Metallic Access Unit (MAU) GTD-5 Model Technical Manual. Service Service Manual. next level solutions
Communications Products Division Metallic Access Unit (MAU) GTD-5 Model 24845-001 Technical Manual next level solutions Service Service Manual No part of this publication may be reproduced, stored on a
More informationCONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Receptacle Kit and a Protective Cover Assembly.
Revised Sept-28-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Instructions CONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Kit
More informationUSB-TTL-5 PRODUCT IS A COMBINATION OF PRODUCTS USB AND TTL-232-5P BOTH DATASHEETS ARE INCLUDED IN THIS PDF FILE
USB-TTL-5 PRODUCT IS A COMBINATION OF PRODUCTS USB-232-2 AND TTL-232-5P BOTH DATASHEETS ARE INCLUDED IN THIS PDF FILE USB-232-2 USB 2.0 To RS-232 Converter DB9 www.serialcomm.com Datasheet Revision 2.4
More informationSerial Communication Prof. James L. Frankel Harvard University. Version of 2:30 PM 6-Oct-2015 Copyright 2015 James L. Frankel. All rights reserved.
Serial Communication Prof. James L. Frankel Harvard University Version of 2:30 PM 6-Oct-2015 Copyright 2015 James L. Frankel. All rights reserved. Overview of the Serial Protocol Simple protocol for communicating
More informationSender Receiver Sender
EEE 410 Microprocessors I Spring 04/05 Lecture Notes # 19 Outline of the Lecture Interfacing the Serial Port Basics of Serial Communication Asynchronous Data Communication and Data Framing RS232 and other
More informationInstalling the DX LCD Display
DX LCD Display User s Guide 3-1 Chapter 3 Installing the DX LCD Display Introduction Use the DX LCD Display as either a portable device, or permanently mount it in a panel or on the wall. For panel and
More informationCAB 232MT and CAB 232FC EIA/TIA 232 Serial Cable Specifications
CAB232MT and CAB232FC EIA/TIA232 Serial Cable Specifications Document ID: 46800 Contents Introduction Prerequisites Requirements Components Used Conventions EIA/TIA232 Speed and Distance Limitations Serial
More informationProduct Overview CHAPTER
CHAPTER 1 Product Overview The CDDI/FDDI C1400 Concentrator is a member of a family of concentrators that provide Copper Distributed Data Interface/multilevel transmission (CDDI/MLT-3) and single and multimode
More informationMini Driver V (Mini Driver MP with 5-Screw Terminal Block) MINI DRIVER MP
MAY 1997 ME745A-F-R2 ME745A-M-R2 ( Driver MP with 5-Screw Terminal Block) MINI DRIVER MP CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX
More informationChapter 2. Installing the Chapter 2. Contents
Contents Chapter 2 Installing the 3512 Overview... 2-2 Unpacking... 2-2 Telephone Equipment... 2-3 Customer-Provided Telephone Equipment... 2-3 Telephone Company Procedures and Regulatory Requirements...
More informationM-Series QuickStart Guide. Publication Number Rev B
M-Series QuickStart Guide Publication Number 821003572 Rev B Disclaimer Datalogic Automation Inc. makes no representations or warranties for merchantability or fitness for any particular purpose, regarding
More informationCable and Port Specifications
APPENDIXD This appendix provides the cable and port specifications, and includes the following sections: Cables and Adapters Provided, page D-1 Console Port, page D-2 COM1 Port, page D-3 MGMT 10/100/1000
More informationLinUDP Interface User Manual
Documentation of the LinUDP Interface of the following Drives: - E1250-IP-UC until Firmware Build 6.3 - C1250-IP-XC until Firmware Build 6.3 - E1450-IP-QN until Firmware Build 6.3 LinUDP Interface User
More informationMeridian 1 Option 11C ISDN BRI hardware installation and maintenance
Meridian 1 ISDN BRI hardware installation and maintenance Document Number: 553-3011-311 Document Release: Standard 8.00 Date: December 2000 Year Publish FCC TM Copyright 1992 2000 Nortel Networks All Rights
More informationMeridian 1 ISDN Basic Rate Interface Installation
Meridian Document Number: -90-00 Document Release: Standard.00 Date: April 000 Year Publish FCC TM Copyright 99 000 Nortel Networks All Rights Reserved Printed in Canada Information is subject to change
More informationEasyCoder 501/601 Installation Instructions
RS 422/485 INTERFACE KIT Introduction Note: Illustrations show an EasyCoder 501. The principles for fitting this optional equipment in an EasyCoder 601 are exactly the same. The RS 422/485 Interface Board
More informationITEM NO: SP-001, SP-001P, SP-001VP, SP-001VPD, SP-002, SP-002VP, SP-002VPD, SP-003, SP-004, SP-004VPD, SP-005, SP-006, SP-016C, SP-016T
Online Coaxial / Twisted Pair Surge Protection Device ITEM NO: SP-001, SP-001P, SP-001VP, SP-001VPD, SP-002, SP-002VP, SP-002VPD, SP-003, SP-004, SP-004VPD, SP-005, SP-006, SP-016C, SP-016T Application
More informationEnhanced Mini-Chansim Model VCS-232
Enhanced Mini-Chansim Model VCS-232 Operations Manual ViaSat Inc. 6155 El Camino Real Carlsbad, CA 92009 http://www.viasat.com SAFETY WARNING Always observe standard safety precautions during installation,
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIMENT DEMOS HUNDREDS OF MANUFACTURERS SUORTED
More informationEtherCAT SoE Interface User Manual
Documentation of the EtherCAT SoE Interface of the following Drives: - E1250-SE-UC (E1250-EC-UC) - E1450-SE-QN -0S (E1450-EC-QN-0S) - E1450-SE-QN -1S (E1450-EC-QN-1S) EtherCAT SoE Interface User Manual
More informationPCL Port RS-232 Interface Card
PCL-858 8-Port RS-232 Interface Card Copyright Notice This documentation and the software included with this product are copyrighted 2001 by Advantech Co., Ltd. All rights are reserved. Advantech Co.,
More informationNOTE: The numbers in the wiring diagrams do not show the order of connection. Follow the written instructions to make the connections.
Connectivity Overview Connectivity January 001 Page -1 Overview This chapter contains information that describes the hardware components and connections used to connect a Lucent INTUITY system and serial
More informationRCS/6000. Hardware. Manual
RCS/6000 Hardware Manual Document number 80-001052-6 Revision A RCS/6000 Hardware Manual Document part number 80-001052-6 Revision History Date Revision Description 4/10/01 A Initial production release
More informationXTENDEX Series ST-C5USBD FOOT DVI and USB Extender via CAT5e/6 Installation and Operation Manual
XTENDEX Series ST-C5USBD-250 250 FOOT DVI and USB Extender via CAT5e/6 Installation and Operation Manual MAN087 Rev Date 10/22/2009 TRADEMARK XTENDEX is a registered trademark of Network Technologies Inc
More informationSOHO Access TM Module. User Guide. SAM-SW5U: 5-port 10/100 Ethernet Switch
SAM-SW5U: 5-port 10/100 Ethernet Switch 1. Introduction The 5 port 10/100BASE-TX Switch is compact and attractively designed for use within Suttle s SOHO Access TM Enclosure. They are ideal solution for
More informationUSER MANUAL. MODEL 1225 ParaLink TM Parallel Short Range Modem. SALES OFFICE (301) TECHNICAL SUPPORT (301)
USER MANUAL MODEL 1225 ParaLink TM Parallel Short Range Modem C E R T I F I E D An ISO-9001 Certified Company Part #07M1225-B Doc. #104011UB Revised 9/12/97 SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT
More informationAdvanced Test Equipment Rentals ATEC (2832)
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) aurora Tempo User Guide 423972 Issue 1a - 10/99 Appendix 1 - Technical Data Appendix 1 - Technical Data Contents aurora
More informationSee instructions to download and install the latest version of LinkBoxMB and the user's manual at
Safety Instructions WARNING Follow carefully this safety and installation instructions. Improper work may lead to serious harmful for your health and also may damage seriously the IntesisBox and/or any
More informationEthernet/IP Interface User Manual
Ethernet/IP Interface User Manual This document applies to the following drives: E1250-IP-xx E1450-IP-xx (with Ethernet/IP Interface SW installed) 2012 NTI AG This work is protected by copyright. Under
More informationGigaSwitch 8. User Guide
GigaSwitch 8 User Guide GigaSwitch 8 User Guide Document lu_01_00016_4_man Copyright 2003-2011. All rights reserved. No part of this documentation may be reproduced or transmitted in any form or by any
More informationA+ Guide to Managing & Maintaining Your PC, 8th Edition. Chapter 16 Networking Types, Devices, and Cabling
A+ Guide to Managing & Maintaining Your PC, Chapter 16 Networking Types, Devices, and Cabling Objectives Learn about network types and topologies Learn about the hardware used to build local networks Learn
More informationConnecting and Routing the Cables and Wires
This chapter explains how to install the NCS 2002 shelf. The sections are: NTP-L36 Attaching Wires to Timing, LAN, and Craft Pin Connections in NCS 2002, on page 1 NTP-L36 Attaching Wires to Timing, LAN,
More informationInstalling the H2 -EBC(100), H2 -EBC -F or H4 -EBC( -F)
12 Installing the H2 -EBC(100), H2 -EBC -F or H4 -EBC( -F) In This Chapter Network Identifiers Setting the Module ID The H2 Series EBC DIP Switch The H4 Series EBC DIP Switch Inserting the H2 Series EBC
More informationConnector and Cable Specifications
APPENDIXB Connector Specifications, page B-1 Cables and Adapters, page B-3 Connector Specifications 10/100 and 10/100/1000 Ports, page B-1 SFP Module Connectors, page B-2 Dual-Purpose Ports, page B-2 Cables
More information