Evolution Series Floor Boxes. Raised Floors Concrete Floors Wood Floors. n Durable 180

Transcription

1 WIREMOLD Evolution Series Floor Boxes Evolution Series The Next Generation of Floor Boxes Evolution Series Floor Boxes are the latest advancement in the most complete and innovative line of floor solutions in the industry. In addition to a unique design that allows the same floor box to be used in multiple floor applications, high capacity and multi-functional capabilities make Evolution Series Floor Boxes ideal for areas where large capacity audio/ video, power and communication services are needed. Ranging in size from 6- to 10-gangs of capacity, these boxes have completely finished interiors with removable modules that provide easy access for reconfiguring services. Evolution Series Floor Boxes are an ideal option for installations where services are constantly evolving, such as commercial offices, conference rooms, stages, and entertainment venues. New Evolution Series Floor Boxes provide increased capacity options and a variety of innovations not available in any other floor boxes. FEATURES & BENEFITS n One box many applications. Evolution Series Floor Boxes are designed to work in concrete, raised and wood floor applications and are fully adjustable both pre- and post-concrete pour. A single box can be specified for multiple floor types without having to order additional components or accessories. Raised Floors oncrete Floors Wood Floors n onfigurable with removable modules. In addition to having removable dividers and a tunnel feature that allows all compartments to be connected, the modules are removable through the top or back of the floor box. This allows for easier installations and facilitates moves, adds and changes without having to disconnect services, saving time and money. n Audio/Video Design. Evolution Series Floor Boxes have been developed specifically with the A/V industry in mind. With 3 1/2" - 3 7/8" [89mm x 98mm] of wiring capacity behind each device plate, these boxes will accept devices from leading A/V manufacturers including Extron Electronics and restron. n Durable 180 articulating hinge. Hinge design enables covers to open a full 180 and lie flat on the floor surface with the durability to support a large cover. Provides easy access to all interior modules and activations while reducing tripping hazards. ED1662R6 Updated December 2016 For latest specs visit

2 FEATURES & BENEFITS (continued) n Auto-close egress doors. able egress doors lock in position when open, and automatically closes around wires to protect cabling and reduce trip hazards. n Accepts standard size wall plates. Evolution Series Floor Boxes accept industry standard single-, double- and triple-gang wall plates from industry leading manufacturers. n Multiple size knockouts. All Evolution Series Floor Boxes are available with multiple trade size knockouts ranging in size from 3/4" to 2" allowing for multiple activations and wiring configurations. n Die cast aluminum cover assemblies. Evolution Series Floor Box overs have been designed to work on multiple floor surfaces and are manufactured from die cast aluminum to provide strength and style. Decorative powder coat colors (black, brass, bronze, gray and nickel) will complement any room décor. n Finished interior. Fully finished interior removes the unfinished industrial look while increasing visibility, making it easier to see where to plug in devices. n Large capacity. 6- to 10-gangs of capacity to accommodate power, communications, and A/V devices. A minimum of 5" [127mm] of space between devices providing ample space for hand access when plugging and unplugging into the devices. n Suitable for use in air handling spaces. In accordance with Sec (c) of the National Electric ode. n Meets ADA Accessibility Guidelines. Trim flange is designed to meet the ADA Accessibility Guidelines as it pertains to ADA Standard 4.5, which addresses the change in floor and ground surface levels. n able Management. Allows multiple cables to be organized and controlled for easier cable egress. n Furniture Feed. Designed to be installed in concrete, raised and wood floors. Provides large capacity feeds (up to 2"). Trade size knockouts for power, communications and A/V devices. n Bare (polished) concrete and terrazzo applications. Evolution Series Floor Box has been designed to be installed into bare (polished) concrete and terrazzo floors. n TopGuard TM Protection. Evolution Series Floor Box covers meet and exceed UL scrub water exclusion requirements for tile, carpet, wood, bare concrete and terrazzo floor coverings. 2

3 Mud ap (Temporary onstruction over) Evolution Series Floor Box Included omponents L Bracket able Management Guides Tunnel Each Removable Module consists of the above components Back Knockout Plate Mounting Bracket Removable Module Box oncrete Level Leg Toggle lamp Divider (Removable/ Repositionable) End ap Note: All items shown above are included with Evolution Series Floor Boxes. Evolution Series Floor Box Model Selection Guide EVOLUTION FLOOR BOX MODEL INSTALL FLOOR TYPE: oncrete Floor Raised Floor Wood Floor BOX TYPE: EFB6S EFB6S-OG EFB8S EFB8S-OG EFB10S EFB10S-OG EFBFF EFBFF-OG YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES Standard On-Grade Standard On-Grade Standard On-Grade Furniture Feed Furniture Feed BOX APAITY: 6-Gangs 6-Gangs 8-Gangs 8-Gangs 10-Gangs 10-Gangs 2-Gangs 2-Gangs DEPTH BEHIND PLATES: 3 7/8" [98mm] 3 7/8" [98mm] 3 1/2" [89mm] 3 1/2" [89mm] 3 1/4" [81mm] 3 1/4" [81mm] N/A N/A REMOVABLE MODULES: YES YES YES YES YES YES DEVIE PLATE SIZE: OVERS: OLORS: Uses Standard Size Device Plates: Single-Gang (2 3/4" x 4 1/2") [70mm x 114mm] Uses Standard Size Device Plates: Single-Gang (2 3/4" x 4 1/2") Double-Gang (4 9/16" x 4 1/2") Triple-Gang (6 3/8" x 4 1/2") Four-Gang (8 1/8" x 4 1/2") Uses non-standard size Device Plates (4.652" x 2.302") [117mm x 58mm] Standard Plates: Double-Gang (4 9/16" x 4 1/2")) Triple-Gang (6 3/8" x 4 1/2") Five-Gang (10" x 4 1/2") EFB610T Series, EFB610BT Series, EFB610T Series, EFB610BT Series Black, Gray, Brass, Nickel, Bronze FLOOR SURFAE: arpet, Tile, Wood, Bare (Polished) oncrete & Terrazzo FPFFT Series Black, Gray, Brass, Nickel, Bronze, Brushed Aluminum KO SIZE RANGE: (Trade Size) NOTES: 3/4" to 2" 3/4" to 2" 3/4" to 2" 3/4" to 2" 3/4" to 2" 1" to 2" 1/2" to 2" 1/2" to 2" overs open full 180, Slide cable egress doors, Painted interior Evolution Series Floor Box ompartment Volumes MODEL OUTER OMPARTMENTS (Each) ENTER OMPARTMENTS (Each) EFB6 Series 32 in. 3 [524ml] 38.5 in. 3 [630ml] EFB8 Series 27.5 in. 3 [450ml] 34 in. 3 [557ml] EFB10 Series 23.5 in. 3 [385ml] 27.5 in. 3 [450ml] EFBFF Series 64.5 in. 3 [1056ml] 64.5 in. 3 [1056ml] 3

4 EFB6S 15 1/8" [384mm] Evolution Series EFB6 Floor Box Ordering Information 11 3/16" [284mm] NOTE: For use on bare (polished) concrete or terrazzo floors EFB610-TR must be used. (Sold separately.) 6-Gang Floor Box has been designed to be installed in concrete floors, raised floors, & wood floor applications. Box has a fully finished interior to assist plugging and unplugging of devices. Designed to work with standard size wall plates. Box comes complete with all components needed for initial installation. Box is compatible with Wiremold Walkerflex Modular Wiring System. ustom options are available upon request. 4 1/16" [103mm] omponents Included: A Protective/Disposable over B Tunnel System for connecting the two modules of compartments Two (2) Removable Modules D Two (2) Toggle lamps to secure box to raised and wood floors E Two (2) able Management Guides F Two (2) Leveling Support Legs for concrete applications G Trade Size Knockouts ranging in size from 3/4" to 2" trade size H Two (2) L Brackets Each Module onsists of: One (1) EFB6S-MB Mounting Bracket One (1) Back Plate Two (2) End aps One (1) EFB6S-DIV Divider Three (3) 3/4"/1 1/4" oncentric Knockout Plate EFB6S Exploded View A B Items not included with the box and sold separately: Receptacles, ommunication Jacks A/V Devices Device plates. H F D E EFB6S Depth Behind Plates EFB6S Knockout locations & Sizes Three (3) KOs: Outer: Inner: 3/4" Trade Size KO 1" Trade Size KO Four (4) 1" Trade Size KOs 3.7/8" [99mm] 1" Trade Size KO Three (3) KOs: Outer: Inner: 3/4" Trade Size KO NOTE: Three (3) removable knockout plates per side allow for the EFB6S-2HUB 2" conduit adapter to be installed. Outer: 2" Trade Size KO Inner: 1" Trade Size KO 4

5 EFB6S-OG 15 1/8" [384mm] 11 3/16" [284mm] 4 1/16" [103mm] NOTE: For use on bare (polished) concrete or terrazzo floors EFB610-TR must be used. (Sold separately.) Evolution Series EFB6 Floor Box Ordering Information 6-Gang Floor Box has been designed to be installed in both on-grade and above grade concrete floor applications. Box has an epoxy coating that allows the box to be placed in on-grade applications without the need for additional vapor barriers. Designed to work with standard size wall plates. Box comes complete with all components needed for initial installation. ustom options are available upon request. omponents Included: A Protective/Disposable over B Tunnel System for connecting the two modules of compartments Two (2) Removable Modules D Two (2) able Management Guides E Two (2) Leveling Support Legs for concrete applications F Trade Size Knockouts ranging in size from 3/4" to 2" trade size Each Module onsists of: One (1) EFB6S-MB Mounting Bracket One (1) Back Plate One (1) EFB6S-DIV Divider EFB6S-OG Exploded View A B Items not included with the box and sold separately: Receptacles, ommunication Jacks A/V Devices Device plates. D E EFB6S-OG Depth Behind Plates EFB6S-OG Knockout locations & Sizes Three (3) KOs: Outer: Inner: 3/4" Trade Size KO 1" Trade Size KO Four (4) 1" Trade Size KOs 3 7/8" [99mm] 1" Trade Size KO Three (3) KOs: Outer: Inner: 3/4" Trade Size KO NOTE: Three (3) removable knockout plates per side allow for the EFB6S-2HUB 2" conduit adapter to be installed. Outer: 2" Trade Size KO Inner: 1" Trade Size KO 5

6 EFB6M Module Bank of three (3) compartments that accept power, communications and audio/video devices. Accepts standard size (2 3/4" x 4 1/2" [70mm x 114mm]) device plates. Includes device bracket, back plate, three (3) knockout plates (3/4"/1 1/4" concentric), two (2) end caps and one (1) divider. NOTE: Module will fit on either side of the floor box. EFB6-MB Evolution Series 6-Gang Floor Box Accessories Ordering Information Mounting Bracket hold up to three (3) devices of power, communications or audio/video devices. Bracket accepts standard size (2 3/4" x 4 1/2" [70mm x 114mm]) device plates sold separately by others. atalog No./Item EFB6-3/4 Knockout Plate Has one (1) 3/4" trade size knockout. EFB6-3/4-11/4 Knockout Plate Has one (1) 1 1/4" concentric trade size knockout opening. EFB6-11/4 Knockout Plate Has one (1) 1 1/4" trade size knockout. EFB-AAP Device Plate holds 2 Extron Electronics AAP devices. Device plate dimensions: 2 3/4" x 4 1/2" [69mm x 114mm]. EFB6-TUN Tunnel 6 gang tunnel allows for cables to be wrapped around box from one module to the other. EFB-MAAP Device Plate holds 4 Extron Electronics MAAP devices. Device plate dimensions: 2 3/4" x 4 1/2" [69mm x 114mm]. EFB6-DIV Relocatable Divider Provides separation of services. Includes one (1) divider plate. EFB-MOS EFB-B Device Plate European device plate accepts up to [45mm x 67.5mm] Arteor device. Device plate dimensions: 2 3/4" x 4 1/2" [69mm x 114mm]. Blank Device Plate Device plate dimensions: 2 3/4" x 4 1/2" [69mm x 114mm]. EFBLL oncrete Leveling Legs Provide floor box adjustment up or down to match the desired pour height of the concrete. Included two (2) leveling legs, threaded rod not supplied. EFBMG able Management Guides Guides help organize and maintain cable position when opening and closing the cover. EFB6S-2HUB 2" onduit Hub Hub allows 2" conduit to be fed into the back of EFB6S and EFB6S-OG Floor Boxes. Maximum of six (6) hubs per box. 6

7 EFB8S 15 1/8" [384mm] Evolution Series EFB8 Floor Box Ordering Information 11 3/16" [284mm] 6" [152mm] NOTE: For use on bare (polished) concrete or terrazzo floors EFB610-TR must be used. (Sold separately.) 8-Gang Floor Box has been designed to be installed in concrete floors, raised floors, & wood floor applications. Box has a fully finished interior to assist plugging and unplugging of devices. Designed to work with standard size wall plates. Box comes complete with all components needed for initial installation. Box is compatible with Wiremold Walkerflex Modular Wiring System. ustom options are available upon request. omponents Included: A Protective/Disposable over B Tunnel System for connecting the two modules of compartments Two (2) Removable Modules D Two (2) Toggle lamps to secure box to raised and wood floors E Two (2) able Management Guides F Two (2) Leveling Support Legs for concrete applications G Trade Size Knockouts ranging in size from 3/4" to 2" trade size H Two (2) L Brackets Each Module onsists of: One (1) EFB8S-MB Mounting Bracket One (1) Back Plate Two (2) End aps One (1) EFB8S-DIV Divider One (1) 2" Trade Size Knockout Plate One (1) 1 1/4"/3/4" oncentric Trade Size Knockout Plate EFB8S Exploded View A B E Items not included with the box and sold separately: Receptacles, ommunication Jacks A/V Devices Device plates. H D F EFB8S Depth Behind Plates EFB8S Knockout locations & Sizes Outer: Inner: 3/4" Trade Size KO Eight (8) KOs: 1" Trade Size KO 3 1/2" [89mm] 3/4" Trade Size KO 2" Trade Size KO 7

8 EFB8S-OG 15 1/8" [384mm] Evolution Series EFB8 Floor Box Ordering Information 11 3/16" [284mm] 6" [152mm] 8-Gang Floor Box has been designed to be installed in both on-grade and above grade concrete floor applications. Box has an epoxy coating that allows the box to be placed in on-grade applications without the need for additional vapor barriers. Designed to work with standard size wall plates. Box comes complete with all components needed for initial installation. ustom options are available upon request. NOTE: For use on bare (polished) concrete or terrazzo floors EFB610-TR must be used. (Sold separately.) omponents Included: A Protective/Disposable over B Tunnel System for connecting the two modules of compartments Two (2) Removable Modules D Two (2) able Management Guides E Two (2) Leveling Support Legs for concrete applications F Trade Size Knockouts ranging in size from 3/4" to 2" trade size Each Module onsists of: One (1) EFB8S-MB Mounting Bracket One (1) Back Plate One (1) EFB8S-DIV Divider EFB8S-OG Exploded View A B D Items not included with the box and sold separately: Receptacles, ommunication Jacks A/V Devices Device plates. E EFB8S-OG Depth Behind Plates EFB8S-OG Knockout locations & Sizes Outer: 2" Trade Size KO Inner: 1" Trade Size KO Outer: 2" Trade Size KO Inner: 1" Trade Size KO Eight (8) KOs: 1" Trade Size KO 3 1/2" [89mm] 8

9 EFB8-MB Evolution Series 8-Gang Floor Box Accessories Ordering Information Mounting Bracket holds up to four (4) devices for power, communications or audio/video. Bracket accepts standard size (2 3/4" x 4 1/2" [70mm x 114mm]) device plates sold separately by others. atalog No./Item EFB810-3/4-3/4 Knockout Plate Has two (2) 3/4" trade size knockouts. EFB8-22GMB EFB8-4GMB Mounting Bracket Equipped with two (2) 2-gang standard size device openings for a standard 2-gang (4 9/16" x 4 1/2" [116mm x 114mm]). Ideal for 2-gang A/V devices such as restron 2-gang digital media devices. Device plates and devices supplied by others. Mounting Bracket Holds a standard 4 gang device plate. Device plate dimensions: 8 1/8" x 4 1/4" [206mm x 116mm]. EFB810-3/4-11/4 EFB810-2 Knockout Plate Has one 3/4" and one 3/4"/1 1/4" concentric trade size knockout. Knockout Plate Has one 2" trade size knockout. EFB-AAP Device Plate holds two (2) Extron Electronics AAP devices. Device plate dimensions: 2 3/4" x 4 1/2" [69mm x 114mm]. EFB810-TUN Tunnel For EFB8 Series and EFB10 Series boxes. Tunnel allows cables to be wrapped around box from one module to the other. EFB-MAAP Device Plate holds four (4) Extron Electronics MAAP devices. Device plate dimensions: 2 3/4" x 4 1/2" [69mm x 114mm]. EFB810-DIV Relocatable Divider Provides separation of services. Includes one divider plate. EFB-MOS Device Plate European device plate accepts up to [45mm x 67.5mm] Arteor device. Device plate dimensions: 2 3/4" x 4 1/2" [69mm x 114mm]. EFBLL oncrete Leveling Legs Legs allow floor box to be adjusted up or down to match the desired pour height of the concrete. Includes two (2) leveling legs. Threaded rod not supplied. EFB-B Blank Device Plate Device plate dimensions: 2 3/4" x 4 1/2" [69mm x 114mm]. 9

10 Evolution Series 8-Gang Floor Box Accessories Ordering Information (continued) EFBMG able Management Guides Guides help organize and maintain cable position when opening and closing the cover. atalog No./Item EFB-50A 50A Adapter Allows for a 50A device to be installed on the 8- gang and 10-gang series boxes. NOTE: Only fits on othe side of the floor box where the device is facing the tunnel. 50A Device Tunnel 10

11 EFB10S 15 1/8" [384mm] Evolution Series EFB10 Floor Box Ordering Information 11 3/16" [284mm] 6" [152mm] NOTE: For use on bare (polished) concrete or terrazzo floors EFB610-TR must be used. (Sold separately.) 10-Gang Floor Box has been designed to be installed in concrete floors, raised floors, & wood floor applications. Box has a fully finished interior to assist plugging and unplugging of devices. Box comes complete with all components needed for initial installation. Box is compatible with Wiremold Walkerflex Modular Wiring System. ustom options are available upon request. omponents Included: A Protective/Disposable over B Tunnel System for connecting the two modules of compartments Two (2) Removable Modules D Two (2) Toggle lamps to secure box to raised and wood floors E Two (2) able Management Guides F Two (2) Leveling Support Legs for concrete applications G Trade Size Knockouts ranging in size from 3/4" to 2" trade size H Two (2) L Brackets EFB10S Exploded View Each Module onsists of: One (1) EFB10S-MB Mounting Bracket One (1) Back Plate Two (2) End aps One (1) EFB10S-DIV Divider One (1) 2" Trade Size Knockout Plate One (1) 1 1/4"/3/4" oncentric Trade Size Knockout Plate A B E Items not included with the box and sold separately: Receptacles, ommunication Jacks A/V Devices Device plates. H D F EFB10S Depth Behind Plates EFB10S Knockout locations & Sizes Outer: Inner: 3/4" Trade Size KO 2" Trade Size KO Ten (10) KOs: 1" Trade Size KO 3 1/2" [89mm] 3/4" Trade Size KO 11

12 EFB10S-OG 15 1/8" [384mm] Evolution Series EFB10 Floor Box Ordering Information 11 3/16" [284mm] 6" [152mm] 10-Gang Floor Box has been designed to be installed in both on-grade and above grade concrete floor applications. Box has an epoxy coating that allows the box to be placed in on-grade applications without the need for additional vapor barriers. Box comes complete with all components needed for initial installation. ustom options are available upon request. NOTE: For use on bare (polished) concrete or terrazzo floors EFB610-TR must be used. (Sold separately.) omponents Included: A Protective/Disposable over B Tunnel System for connecting the two modules of compartments Two (2) Removable Modules D Two (2) able Management Guides E Two (2) Leveling Support Legs for concrete applications F Trade Size Knockouts ranging in size from 3/4" to 2" trade size Each Module onsists of: One (1) EFB10S-MB Mounting Bracket One (1) Back Plate One (1) EFB10S-DIV Divider EFB10S-OG Exploded View A B D Items not included with the box and sold separately: Receptacles, ommunication Jacks A/V Devices Device plates. E EFB10S-OG Depth Behind Plates EFB10S-OG Knockout locations & Sizes Outer: 2" Trade Size KO Inner: 1" Trade Size KO Outer: 2" Trade Size KO Inner: 1" Trade Size KO Ten (10) KOs: 1" Trade Size KO 3 1/2" [89mm] 12

13 EFB10-MB Evolution Series 10-Gang Floor Box Accessories Ordering Information Mounting Bracket hold up to five (5) devices for power, communications or audio/video. Bracket accepts EFB10 Series device plates (2 1/32" x 4 5/8") [58mm x 117mm] device plates sold separately. atalog No./Item EFB10-DE Decorator Style Device Plate For use with decorator style receptacles, GFI receptacle, and decorator style audio/video devices. Device plate dimensions: 2.3" x 4.652" [58mm x 118mm]. Includes receptacle spacers. EFB10-23GMB EFB10-5GMB Mounting Bracket Equipped with one 2-gang standard size device opening and one 3-gang standard size device opening. Accepts a standard 2-gang (4 9/16" x 4 1/2" [116mm x 114mm]) and a 3-gang (6 3/8" x 4 1/2" [162mm x 114mm]) device plate. Ideal for 2-gang A/V devices such as restron 2-gang and 3-gang digital media devices. Device plates and devices supplied by others. Mounting Bracket Holds a standard 5 gang device plate Device plate dimensions: 10" x 4 1/2" [254mm x 116mm]. EFB10-S1 EFB10-S2 Knockout Plate Single receptacle 1.39" [35mm]. diameter. Device plate dimensions: 2.3" x 4.652" [58mm x 118mm]. Includes receptacle spacers. Knockout Plate Single receptacle 1.59" [40mm]. diameter. Device plate dimensions: 2.3" x 4.652" [58mm x 118mm]. Includes receptacle spacers. EFB10-6AB Device Plate Accepts up to three (3) dual Wiremold Open System communication adapters. Adapters sold separately. Device plate dimensions: 2.3" x 4.652" [58mm x 118mm]. EFB10-B Blank Device Plate Device plate dimensions: 2.3" x 4.652" [58mm x 118mm]. EFB10-3S2 Device Plate Accepts up to three (3) Ortronics Series II devices. Ortronics devices sold separately. Device plate dimensions: 2.3" x 4.652" [58mm x 118mm]. EFB10-DP Duplex Device Plate Device plate dimensions: 2.3" x 4.652" [58mm x 118mm]. Includes receptacle spacers. EFB10-2 Device Plate Accepts one dual Wiremold Open System adapter, or one Ortronics Series II adapter, or one Ortronics TracJack adapter. Adapters sold separately. Device plate dimensions: 2.3" x 4.652" [58mm x 118mm]. 13

14 Evolution Series 10 Gang Floor Box Accessories Ordering Information (continued) EFB10-AAP Device Plate holds two (2) Extron Electronics AAP devices. Device plate dimensions: 2.3" x 4.652" [58mm x 118mm]. atalog No./Item 5507S-WH Rectangular Spacer For mounting commercial device plates. Installs between the device bracket and a device. EFB10-MAAP Device Plate holds four (4) Extron Electronics MAAP devices. Device plate dimensions: 2.3" x 4.652" [58mm x 118mm]. 5507T1-WH Single Receptacle Faceplate For covering single receptacles 1.59" [40mm] in diameter. EFB10-MOS Device Plate [45mm x 67.5mm] device plate. Device plate dimensions: 2.3" x 4.652" [58mm x 118mm]. 5507T2-WH Single Receptacle Faceplate For covering single receptacles 1.41" [36mm] in diameter. 5507B-WH Blank Faceplate For covering unused compartments in the device bracket TJ-WH Ortronics Faceplate For mounting Ortronics datacom inserts. Accepts four (4) TracJack devices. 5507D-WH Duplex Receptacle Faceplate For covering duplex style devices. Accepts 106 frame TJ-WH Ortronics Faceplate For mounting Ortronics datacom inserts. Accepts six (6) TracJack devices. 5507R-WH Rectangular Receptacle Faceplate For covering rectangular decorator style devices. EFB810-3/4-3/4 Knockout Plate Has two (2) 3/4" trade size knockouts. 14

15 EFB810-3/4-11/4 Evolution Series 10 Gang Floor Box Accessories Ordering Information (continued) Knockout Plate Has one 3/4" and one 3/4"/1 1/4" concentric trade size knockout. atalog No./Item EFBLL oncrete Leveling Legs Legs allow floor box to be adjusted up or down to match the desired pour height of the concrete. Includes two (2) leveling legs. Threaded rod not supplied. EFB810-2 Knockout Plate Has one 2" trade size knockout. EFBMG able Management Guides Guides help organize and maintain cable position when opening and closing the cover. EFB810-TUN Tunnel For EFB8 Series and EFB10 Series boxes. Tunnel allows cables to be wrapped around box from one module to the other. EFB-50A 50A Adapter Allows for a 50A device to be installed on the 8 gang and 10 gang series boxes. NOTE: Only fits on othe side of the floor box where the device is facing the tunnel. 50A Device EFB810-DIV Relocatable Divider Provides separation of services. Includes one divider plate. Tunnel 15

16 EFB610TBK EFB610TGY EFB610TBS EFB610TNK EFB610TBZ 16 3/8" [416mm] EFB610TBK EFB610TGY EFB610TBS EFB610TNK EFB610TBZ 16 3/8" [416mm] EFB610BTBK EFB610BTGY EFB610BTBS EFB610BTNK EFB610BTBZ 16 3/8" [416mm] Evolution Series Floor Box Accessories Ordering Information 12 1/2" [318mm] 12 1/2" [318mm] 12 1/2" [318mm] Surface Style over with arpet Insert Die cast aluminum cover assembly designed to be used on top of the floor covering. Available in the following powder coated finishes: black (BK), gray (GY), brass (BS), nickel (NK) and bronze (BZ). For use on Evolution Series 6-, 8- and 10-gang floor boxes (EFB6, EFB8 and EFB10). NOTE: Depth of recess area in plate is 1/4" [6.35mm]. Flush Style over with arpet Insert Die cast aluminum cover assembly designed to be used level (flush) with finish floor covering. Available in the following powder coated finishes: black (BK), gray (GY), brass (BS), nickel (NK) and bronze (BZ). For use on Evolution Series 6-, 8- and 10- gang floor boxes (EFB6, EFB8 and EFB10). NOTE: Depth of recess area in plate is 1/4" [6.35mm]. Surface Style over with Solid Lid Die cast aluminum cover assembly designed to be used on top of floor covering. Available in the following powder coated finishes: black (BK), gray (GY), brass (BS), nickel (NK) and bronze (BZ). For use on Evolution Series 6-, 8- and 10-gang floor boxes (EFB6, EFB8 and EFB10). atalog No./Item EFB610BTBK EFB610BTGY EFB610BTBS EFB610BTNK EFB610BTBZ 16 3/8" [416mm] EFB610TR 16 3/8" [416mm] EFB610-TS EFB-Template 12 1/2" [318mm] Flush Style over with Solid Lid Die cast aluminum cover assembly designed to be used on top of floor covering. Available in the following powder coated finishes: black (BK), gray (GY), brass (BS), nickel (NK) and bronze (BZ). For use on Evolution Series 6-, 8- and 10-gang floor boxes (EFB6, EFB8 and EFB10). Bare oncrete/terrazzo Trim Ring Nonmetallic ring for use with bare concrete and terrazzo floor applications. 12 1/2" [318mm] NOTE: Ring must be attached to the floor box before pouring concrete or terrazzo. Tile Shim Used for floor coverings greater than 3/16" [4.7mm]. The EFB610-TS allows the finished cover assembly to be flush with the finished floor. Includes one (1) 1/16" [1.6mm], one (1) 1/8" [3.2mm] and one 1/4" [6.4mm] tile shims for 7/16" [11.1mm] of upward adjustment. Floor Box Template Designed to help mark out floor to insure a proper fit. Load apacities for Evolution Series Floor Box over Assemblies ATALOG NUMBERS MAXIMUM LOAD IN POUNDS EFB610BT Series 1800 EFB610T Series 1800 EFB610BT Series 1800 EFB610T Series 1800 NOTE: Load applied through a 3" [76mm] mandrel in center of the cover. Loads above are static loads only and do not pertain to rolling loads. Evolution Series Floor Box overs are available in powder coated finishes of: (L to R) gray, nickel, bronze, brass and black. 16

17 EFBFF 6 11/16" [170mm] Evolution Series EFBFF Furniture Feed Floor Box Ordering Information 7 3/8" [187mm] 4 1/8" [105mm] 2-Gang Furniture Feed Floor Box Assembly For carpet, tile and wood covered floors. For use in concrete, raised and wood floor applications. Box is provided with a protective, disposable cover that allows the box to be installed at any point in the construction process. Box is available in a standard version for use in above grade concrete, raised, and wood floor applications. Boxes are also compatible with Wiremold Walkerflex Modular Wiring System. ustom options are available upon request. NOTE: For use with bare concrete or terrazzo floors. Use FP-TR Trim Ring. Outer: 1 1/2" Trade Size KO Inner: 1" Trade Size KO Outer: 2" Trade Size KO Inner: 1/2" Trade Size KO NOTE: Box is divided down center to allow for separation between power and communication or A/V services. Each Side, Two KOs: Outer: 3/4" Trade Size KO Inner: Outer: Inner: 1/2" Trade Size KO 17

18 EFBFF-OG 6 11/16" [170mm] Evolution Series EFBFF Furniture Feed Floor Box Ordering Information (continued) 7 3/8" [187mm] 2-Gang Furniture Feed Floor Box Assembly For carpet, tile and wood covered floors. For use in on-grade and above grade concrete floor applications. Box is provided with a protective, disposable cover that allows the box to be installed at any point in the construction process. Box is available with an epoxy coating for on-grade applications. ustom options are available upon request. 4 1/8" [105mm] NOTE: For use with bare concrete or terrazzo floors. Use FP-TR Trim Ring. Outer: 1 1/2" Trade Size KO Inner: 1" Trade Size KO Outer: 2" Trade Size KO Inner: 1/2" Trade Size KO NOTE: Box is divided down center to allow for separation between power and communication or A/V services. Each Side, Two KOs: Outer: 3/4" Trade Size KO Inner: Outer: Inner: 1/2" Trade Size KO 18

19 EFBFF-DIV Evolution Series EFBFF Furniture Feed Floor Box Ordering Information (continued) Divider Provides separation of services. FP-TR Bare oncrete & Terrazzo Ring Nonmetallic ring for use on bare polished concrete and terrazzo floor applications. NOTE: Ring must be attached to the floor box before pouring concrete or terrazzo. atalog No./Item FPFFTBK Furniture Feed over Assembly FPFFTBZ Flanged cover for use in tile or FPFFTGY carpet or wood floor installations. FPFFTNK Die-cast aluminum assembly FPFFTAL available in powder coat finishes of black (BK), bronze (BZ), brass (BS),nickel (NK), gray (GY), or brushed aluminum (AL). Provided with one 1" trade size screw plug for power or communication type cabling and one combination 1 1/4" and 2" trade size screw plug for communication and A/V type cabling. Allows for feeding both power and communication cabling. EFBFF-LL oncrete Leveling Legs Legs allow floor box to be adjusted up or down to match the desired pour height of the concrete. Includes two (2) leveling legs. Threaded rod not supplied. 7 3/4" [197mm] 6 1/2" [165mm] NOTE: Flangeless FloorPort Series (FPFFT) covers are not designed to work with Evolution Series Furniture Feed Floor Boxes. 19

20 NOTES ED1662R6 Updated December 2016 For latest specs visit opyright 2016 Legrand All Rights Reserved Electrical Wiring Systems 60 Woodlawn Street West Hartford, T Phone: BY.LEGRAND ( ) Applewood rescent Vaughan, Ontario L4K 4B4 Phone: