Instruction Manual. Continuity & wiring configuration tester

Transcription

1 PC Cable-Check PRO 77 Instruction Manual Continuity & wiring configuration tester

2 Information Description ection Battery... PC Cable-Check Pro provides a simple check and wiring configuration for DB9, DB, DB D, DB, Centronics, Mini DIN P/, Mini DIN -video, -pin & -pin 9 FireWire, UB, Mini UB, RJ and shielded and unshielded RJ telephone plugs. In addition, RG8 or 9 BNC can be checked with a simple PA or FAIL test with full diagnostic evaluation displayed if the cable fails. Connecting Cables... Operating instructions: Cable Mode... Test Cycle... Custom Cable Connections... tandard Cable Applications... 7 Wiring Configuration Reference... 8 Warranty... 9 Technical upport... 0 Warning: Do not connect tester to live cables or computer systems! Check to see that the battery is installed; switch ON. Use only a standard 9-volt battery. (Battery compartment is located on back of tester.) Connect your cable to the corresponding connectors on the left- and right-hand sides of the tester. Press the CABLE MODE button repeatedly until the red LED indicates the proper connector size is selected. To begin testing, press the TET button and hold it for seconds to begin automatic cycling. If you prefer to use the unit manually, simply step through the testing process by pressing TET for each pin. Unit automatically powers off after 0 seconds of non-use. The cable connection scheme is required to confirm the wiring configuration. tandard wiring configurations & cable applications can be found on the subsequent pages or consult your cable manufacturers manual. If you have a custom cable and need to determine the scheme, use a known good cable and record the pin-out for your reference. 00 connectool Inc. All rights reserved. All trademarks referenced in this document are the property of their respective owners.

3 7 Note: Cable configurations are provided for sample reference only. Contact the cable manufacturer for specific configuration schemes. tandard tandard Cable Applications Cable for IBM AT to P Laserjet & most P plotters. Version DB MALE DB FEMALE DB MALE DB9 FEMALE DB9 MALE DD FEMALE DD MALE DIN UB RJ (UTP & TP) CENTRONIC DB FEMALE DIN Cable for IBM AT to P Laserjet & most P plotters. Version Cable for IBM XT & P/ serial port to P Laserjet, Plus, II, III, 77A & most plotters except P 70. (IBM PCs & compatible) R null modem cable Two different configurations for IBM printer cable used with IBM XT, AT, P/ & compatible to standard parallel printers (IBM and PCs & compatible) IBM AT & compatible to modem cables Null modem cable tar Micronics DP80 to IBM AT cable tar Micronics DP80 to WYE terminal cable tar Micronics P to IBM AT cable VGA (P/) monitor cable for use with data switches. This cable is used for connecting computers with VGA cards to video data switches, PIN #9 is removed P -Video ANY COMBINATION Cable Applications tar Micronics P printer cable, P to WYE terminal cable tar Micronics P to IBM AT printer cable IBM P/ & VGA cards NEC Multisync monitor cable. Connects the IBM P/ or other VGA cards to NEC Multisync monitors (IBM PCs & compatible) IBM P/ & VGA card to ony 0 monitor cable. Connects the IBM P/ or other VGA cards to the ony 0 & 0 monitors. Connects IBM P/ & VGA cards to Mitsubishi Diamond can & Thompson Ultrascan monitor. Extension cable for standard XT, AT monitors tandard monitor cable. (IBM PCs & compatible) Extension cable for VGA/IBM, P/ monitors Cable for connection of parallel ports on two computers LAN data cables UB cables Firewire DB MALE DB FEMALE DB MALE DB9 FEMALE DB9 MALE DD FEMALE DD MALE 9 UB RJ (UTP & TP) CENTRONIC DB FEMALE

4 8 Wiring Configuration Reference DB MALE Male DB FEMALE Female DB Male MALE CENTRONIC Centronics DB MALE Male Cable for IBM AT to P Laserjets & most P plotters Two different configurations for IBM printer cable user with IBM XT, AT, P/ & compatibles to standard parallel printers. (Includes most IBM PCs & compatible regardless of processor: 8, 8, 8, Pentium or Celeron.) DB MALE Male DB MALE Male DB FEMALE Female IBM AT & compatibles to modem cables Cable for IBM XT & P/ erial port to P Laserjet, Plus, II, III, 77A & most plotters except P 70. (includes most IBM PCs & compatible regardless of processor: 8, 8, 8, Pentium or Celeron.) DB MALE Male Null modem cable DB MALE/FEMALE Male/Female DB MALE/FEMALE Male/Female R Null modem cable. As connections are the same, check to make sure cable is not reversed. 7 RJ tar Micronics DP 80 to IBM AT cable

5 Wiring Configuration Reference DD MALE Male DD MALE Male VGA (P/) monitor cable for use with data switches This cable is used for connecting computers with VGA cards to video data switches. Pin #9 is removed. As connections are the same, check to make sure cable is not reversed. (Includes most IBM PCs & compatible regardless of processor: 8, 8, 8, Pentium or Celeron.) DB MALE Male DB MALE Male tar Micronics P printer cable, P to WYE term. As connections are the same, check to make sure cable is not reversed. 7 0 DB MALE Male DD MALE Male Connects IBM P/ & VGA cads to Mitsubishi Diamond can & Thompson Ultrascan monitor Extension cable for standard XT, AT monitors. (Included most IBM PCs & compatible regardless of processor: 8, 8, 8 Pentium or Celeron.) tandard monitor cable. (Includes most IBM PCs & compatible regardless of processor: 8, 8, 8, Pentium or Celeron.) DB Male MALE DB 9 Female FEMALE tar Micronics P to IBM AT printer cable I E L D DD Male MALE DD FEMALE Female Extension cable for VGA/IBM P/ monitors DD MALE Male IBM P/ & VGA cards NEC Multisync monitor cable. Connects the IBM ps/ or other VGA cards to NEC Multisync monitors. DD DB MALE Male DD DB MALE Female Cable for connection of parallel ports on two computers. DD MALE Male IBM P/ & VGA cards ony 0 monitor cable, connects the IBM P/ or other VGA cards to ony 0 & 0 monitors. DB MALE Male RJ tar Micronics DP 80 to WYE terminal cable

6 Wiring Configuration Reference DB MALE Male RJ -pin DB FEMALE Female tar Micronics P to IBM AT cable. 8 7 Telephone RJ Cable -pin Telephone cable. 0Base-T/00BaseT RJ 7 8 UB-A - A Crossover RJ Cable 0Base-T/00 Base-T crossover cable. 7 8 UB-B- B tandard UB Cables. RJ 8 7 UB-A to UB-A RJ ystimax C Category data cables (UTP). 8 7 UB-A erial Bus Cable erial Bus Cable. RJ 8 7 UB-B to mini-ub B RJ 0Base-T data cables (UTP). 8 7 erial UB-BBus Cable UB polarized cables. RJ 8 7 UB-A -Video RJ Token Ring data cables (UTP) pin Mini UB-B DIN erial Bus Cable RJ 8 7 -pin -Video DIN RJ IDN data cables (UTP) pin DIN -Video Cable RJ -pin -pin DIN P Mouse Telephone RJ Cable -pin Telephone cable. Extension -pin DIN Cable P Mouse Extension Cable

7 9 -pin to -pin 9 Warranty Information Firewire 9 -pin Cable Firewire Cable 9 -pin to -pin Firewire 9 -pin Cable Type Firewire Cable Type 9 -pin to -pin Firewire 9 -pin Cable Type Firewire Cable Type 9 -pin to -pin Limited Warranty: connectool Inc. warrants the Purchaser that the product purchased will be of merchantable quality and free from defects of material and workmanship, under normal use and service for a minimum of one year from the date of purchase to the initial user, or as stated on the packaging. connectool will not be liable for any modification of its products by the Purchaser or Purchaser s agent. uch modifications void the warranty. atisfaction of this warranty will be limited to, at connectool s discretion: (a) the repair or modification of the product by connectool, (b) the replacement of the product by connectool, or (c) issuance of a credit memo to the Purchaser for the defective product delivered under the order involved. This warranty ceases to be effective if connectool s examination of the product discloses that the defect was due to misuse, improper maintenance, alteration, modification, accident or unusual degradation of equipment parts due to physical environments in excess of its intended limits. 9 Firewire -pin Cable Firewire Cable There are no warranties which extend beyond the description herein. This warranty is in lieu of all other warranties whether express, implied, or statutory including implied warranties of merchantability of fitness for a particular purpose. Purchaser acknowledges they are not relying on connectool's skill or judgement to select or furnish goods suitable for any connector for any particular purpose. This warranty extends only to the Purchaser from connectool or its authorized distributor. connnectool may refuse any item returned for reasons other than those covered by connectool s Limited Warranty. All warranty returns require a Return Material Authorization (RMA) number or Return Goods Authorization (RGA) number to be returned. 0 Technical upport connectool Inc., Virginia UA upport: Web: Fax: paladin@paladin-tools.com

8 At work with professional every day Cutters trippers litters Crimpers Interchangeable die sets Punchdown tools Tool kits Cable testers Cable pulling tools PN connectool Inc., Virginia UA upport: Int l: Web: Fax: Int l: