Model Number Structure

Transcription

1 Temperature Controllers Easy Setting Using DIP Switch and Simple Functions in DIN mm-size Temperature Controllers Easy setting using DIP switch. Models with two alarms added to Series, ideal for temperature alarm applications. Universal-input (thermocouple/platinum resistance thermometer) models also available. Clearly visible digital display with character height of. mm. Models available with black in addition to white cases. RoHS compliant. Model Number Structure Refer to Safety Precautions for All Temperature Controllers. Refer to ECS/ Operation for operating procedures. CSM DS_E Model Number Legend Models with Terminal Blocks Control Outputs R: Relay Q: Voltage for driving SSR. Alarm Outputs Blank: No alarm : alarm : alarms. Input KJ: Thermocouple P: Platinum resistance thermometer T: Thermocouple/platinum resistance thermometer (universal-input). Power Supply Voltage Blank: to VAC D: VAC/VDC. Case Color Blank: Black W: Light gray Note: A functional explanation is provided here for illustration, but models are not necessarily available for all possible combinations. Refer to Ordering Information when ordering. Examples Relay control output, without alarm, thermocouple input, light gray case: -RKJ-W Relay control output, one alarm output, platinum resistance thermometer input, black case: -RP-W

2 Ordering Information List of Models Case Color: Light Gray, Thermocouple or Platinum Resistance Thermometer, Power Supply Voltage: to VAC Size Type Control modes mm Terminal block ON/OFF or PID Alarms Outputs Model with thermocouple Model with platinum resistance thermometer Relay -RKJ-W -RP-W Voltage (for driving SSR) -QKJ-W -QP-W Case Color: Light Gray, Thermocouple, Power Supply Voltage: VAC/VDC Size Type Control modes mm Terminal block ON/OFF or PID Alarms Outputs Model with thermocouple Relay -RKJD-W Case Color: Light Gray, Universal-input, Power Supply Voltage: to VAC Size Type Control modes mm Terminal block ON/OFF or PID Alarms Outputs Model with universalinput (thermocouple or platinum resistance thermometer) Relay -RT Voltage (for driving SSR) -QT Relay -RT Voltage (for driving SSR) -QT (See note.) Relay -RT Voltage (for driving SSR) -QT Note: There is no alarm output mode switch. The default setting for alarm output is for the upper limit alarm mode. To change the setting, change the alarm type for alarm output in initial setting level. For details, refer to the /ECS-U Digital Temperature Controller User s Manual (Cat. No. H-E-). Case Color: Black, Universal-input, Power Supply Voltage: VAC/VDC Size Type Control modes mm Terminal block ON/OFF or PID Alarms Outputs Model with universalinput (thermocouple or platinum resistance thermometer) Relay -RTD Voltage (for driving SSR) -QTD Relay -RTD Voltage (for driving SSR) -QTD (See note.) Relay -RTD Voltage (for driving SSR) -QTD Note: There is no alarm output mode switch. The default setting for alarm output is for the upper limit alarm mode. To change the setting, change the alarm type for alarm output in initial setting level. For details, refer to the /ECS-U Digital Temperature Controller User s Manual (Cat. No. H-E-). Accessories (Order Separately) Protective Cover Rubber Packing Type Model Hard Protective Cover YA-B Terminal Cover YS- Model Note: The Rubber Packing is provided with the Digital Controller. Model E-COV

3 Specifications Ratings Note:. Do not use an inverter output as the power supply. (Refer to Safety Precautions for All Temperature Controllers.). Models for VAC/DC can also be manufactured. Characteristics Note:. The following exceptions apply to thermocouples. U, L: ± C ± digit max. R: ± C ± digit max. at C or less. The following exceptions apply to platinum resistance thermometers. Input set values,,, for :.% FS ± digit max. Supply voltage to VAC, / Hz VAC, / Hz; VDC Operating voltage range % to % of rated supply voltage Power consumption to VAC: VA VAC: VA, VDC: W Sensor input Thermocouple input type: K, J, L Platinum resistance thermometer input type: Pt, JPt Universal-input (thermocouple/platinum resistance thermometer) type: K, J, L, T, U, N, R, Pt, JPt Control Relay output SPST-NO, VAC, A (resistive load) output Voltage output (for driving the SSR) VDC, ma (with short-circuit protection circuit) Control method ON/OFF or -PID (with auto-tuning) Alarm output SPST-NO, VAC, A (resistive load) Setting method Digital setting using front panel keys Indication method -segment digital display (character height:. mm) and deviation indicators Other functions Setting change prohibit (key protection) Input shift Temperature unit change ( C/ F) Direct/reverse operation Temperature range, Sensor switching (K/J/L, Pt/JPt) Switching is performed between a thermocouple and platinum resistance thermometer for universal-input models. Control period switching -mode alarm output Sensor error detection Ambient operating temperature to C (with no condensation or icing); with -year guarantee: to C Ambient operating humidity % to % Storage temperature to C (with no condensation or icing) Setting accuracy Thermocouple (See note.): (±.% of indication value or ± C, whichever is greater) ± digit max. Indication accuracy Platinum resistance thermometer (See note.): (±.% of indication value or ± C, whichever is greater) ± digit max. (ambient temperature of C) Influence of temperature R thermocouple inputs: (±% of PV or ± C, whichever is greater) ± digit max. Influence of voltage Other thermocouple inputs: (±% of PV or ± C, whichever is greater) ± digit max. Platinum resistance thermometer inputs: (±% of PV or ± C, whichever is greater) ± digit max. Hysteresis (for ON/OFF control).% FS (.% FS for universal-input (thermocouple/platinum resistance thermometer) models) Proportional band (P) to C (automatic adjustment using auto-tuning/self-tuning) Integral time (I) to, s (automatic adjustment using auto-tuning/self-tuning Derivative time (D) to, s (automatic adjustment using auto-tuning/self-tuning) Alarm output range Absolute-value alarm: Same as the control range Other: to input setting range full scale ( C or F) Alarm hysteresis:. C or F (fixed) Control period / s Sampling period ms Insulation resistance MΩ min. (at VDC) Dielectric strength, VAC, / Hz for min between current-carrying terminals of different polarity Vibration Malfunction to Hz, m/s for min each in X, Y, and Z directions resistance Destruction to Hz,.-mm single amplitude for hr each in X, Y, and Z directions Shock resistance Malfunction m/s min., times each in directions Destruction m/s min., times each in directions Life expectancy Electrical, operations min. (relay output models) Weight Approx. g (Controller only) Degree of protection Front panel: Equivalent to IP; Rear case: IP; Terminals: IP Memory protection EEPROM (non-volatile memory) (number of writes:,,) EMC EMI Radiated: EN Group Class A EMI Conducted: EN Group Class A ESD Immunity: EN --: kv contact discharge (level ) kv air discharge (level ) Radiated Electromagnetic Field Immunity: EN --: V/m (- MHz,.-. GHz amplitude modulated) (level ) V/m ( MHz pulse modulated) Conducted Disturbance Immunity: EN --: V (. to MHz) (level ) Noise Immunity (First Transient Burst Noise): EN -- Burst Immunity: kv power-line (level ), kv I/O signal-line (level ) Surge Immunity: EN --: Power line: Normal mode kv; Common mode kv Output line (relay output): Normal mode kv; Common mode kv Voltage Dip/Interrupting Immunity: EN --. cycle, % (rated voltage) Approved standards UL - (listing) CSA C. No.- Conformed standards EN, EN -, IEC - VDE Part (finger protection), when the terminal cover is mounted.

4 Temperature Range Thermocouple Input Models Temperature range (selected using switch) (Default setting: ) Input K J/L, Setting number Minimum setting unit C C Platinum Resistance Thermometer Input Models Temperature range (selected using switch) (Default setting: ) Input.. JPt/Pt.... Setting number Minimum setting unit C. C C. C C. C The shaded value indicates the default setting status. The shaded value indicates the default setting status. Universal-input (Thermocouple/Platinum Resistance Thermometer) Models Using Thermocouple Sensors, Control Mode Switch : OFF Input K J L T U N R,,,, Temperature range,,,,,, (selected, using switch) (Default setting: ) Setting number Minimum setting unit C. C C. C C. C C Using Platinum Resistance Thermometers, Control Mode Switch : ON Temperature range (selected using switch) (Default setting: ) Input Pt JPt,.... Setting number Minimum setting unit C. C C. C C The shaded value indicates the default setting status. The shaded value indicates the default setting status.

5 External Connection Diagram Voltage output models (See note.) Relay output models Alarm output Voltage output Relay output VDC, ma Alarm output (See note A Alarm output (See note B B to VAC, / Hz ( VAC/VDC) (See note.) Platinum resistance thermometer input Thermocouple input Thermocouple/ platinum resistance thermometer universal-input Note:. The voltage output ( VDC, ma) is not electrically isolated from the internal circuits. When using a grounding thermocouple, do not connect output terminals or to ground. Otherwise, unwanted current paths will cause measurement errors.. Models with to VAC and VAC/VDC are separate. Models using VDC have no polarity.. The number of alarm outputs depends on the model. Nomenclature Models with Terminal Blocks Deviation indicators Mode indicators Output indicator Temperature display Alarm indicators Mode Key Lock Release Key Up Key Down Key

6 Dimensions Note: All units are in millimeters unless otherwise indicated. Controller Panel Cutout Dimensions +. L min. + L = ( N.) Mounting side-by-side (group mounting of N Controllers) Note: Terminals cannot be removed. + Adapter for Flush Mounting (Provided) Adapter for flush mounting Panel YF- Adapter for flush mounting. Tightening screws. Note:. The recommended panel thickness is to mm.. Group mounting is possible in one direction only. Accessories (Order Separately) Hard Protective Cover The YA-B Protective Cover (hard type) is available for the following applications. To protect the set from dust and dirt. To prevent the panel from being accidentally touched causing displacement of set values. To provide effective protection against water droplets. C A-B Terminal Cover Rubber Packing E-COV.. YS- (for DIN ) Order the Rubber Packing separately if it becomes lost or damaged. The Rubber Packing can be used to achieve an IP degree of protection for models with terminal blocks. (Deterioration, shrinking, or hardening of the rubber packing may occur depending on the operating environment. Therefore, periodic replacement is recommended to ensure the level of waterproofing specified in NEMA. The time for periodic replacement depends on the operating environment. Be sure to confirm this point at your site. Consider one year a rough standard. OMRON shall not be liable for the level of water resistance if the customer does not perform periodic replacement.) The Rubber Packing does not need to be attached if a waterproof structure is not required.

7 Safety Precautions Refer to Safety Precautions for All Temperature Controllers. Refer to ECS/ Operation for operating procedures. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by.. To convert grams into ounces, multiply by.. In the interest of product improvement, specifications are subject to change without notice.

8 Read and Understand This Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. Application Considerations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof. Disclaimers CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. ERRORS AND OMISSIONS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. OMRON Corporation Industrial Automation Company In the interest of product improvement, specifications are subject to change without notice. (c)copyright OMRON Corporation All Right Reserved.