Peripheral Devices for Environment-resistive Slaves

Transcription

1 Peripheral Devices for Environment-resistive Slaves Peripheral Devices for DeviceNet Communications Ordering Information Environment-resistive Connection Products (for Thin Cable, M Micro Connectors) Product Appearance Model Specifications Sealed Assembling-type Connector (male) XSG-DS7 For communications (plug) Sealed Assembling-type Connector (female) XSC-DS7 For communications (socket) Sealed T-branch Connector DCN- For branch line Sealed Connector with Terminating Resistor DRS- DRS- Plug Socket DCA-CNCW ength (): 0. m DCA-CN0W ength (): m DCA-CN0W ength (): m DCA-CN0W ength (): m Cable with connectors on both ends DCA-CN0W ength (): m DCA-CN0W ength (): 0 m DCA-CNCF ength (): 0. m DCA-CN0F ength (): m Cables with Sealed Connectors 0 mm DCA-CN0F ength (): m DCA-CN0F ength (): m Cable with connector on one end (socket) DCA-CN0F ength (): m DCA-CN0F ength (): 0 m DCA-CNCH ength (): 0. m DCA-CN0H ength (): m 0 mm DCA-CN0H ength (): m DCA-CN0H ength (): m Cable with connector on one end (plug) DCA-CN0H ength (): m DCA-CN0H ength (): 0 m DCA-CNCP Panel-mounting connector (socket) with 0.-m cable Shielded Panel-mounting Connectors (female) XSP-D- Panel-mounting connector socket DCA-CNCM Panel-mounting connector (plug) with 0.-m cable Shielded Panel-mounting Connectors (male) XSM-D- Panel-mounting connector (plug) with solder-cup terminals Waterproof cover (for socket) XSZ- Used to cover an unused connector section Dust cover (for socket) XSZ- 6 Peripheral Devices

2 Environment-resistive Models (for Thin Wires and M Micro Connectors) Product Appearance Model Specifications Sealed T-branch Connector DCN-S For branch line Sealed Assembling type Connector (female) DRS-S DRS-S Plug Socket DCA-CSCW ength (): 0. m DCA-CS0W ength (): m DCA-CS0W ength (): m DCA-CS0W ength (): m Cable with connectors on both ends DCA-CS0W ength (): m DCA-CS0W ength (): 0 m DCA-CSCF ength (): 0. m DCA-CS0F ength (): m Connectors with Shielded Cables 0 mm DCA-CS0F ength (): m DCA-CS0F ength (): m Cable with connector on one end (socket) DCA-CS0F ength (): m DCA-CS0F ength (): 0 m DCA-CSCH ength (): 0. m DCA-CS0H ength (): m 0 mm DCA-CS0H ength (): m DCA-CS0H ength (): m Cable with connector on one end (plug) DCA-CS0H ength (): m DCA-CS0H ength (): 0 m DCN-SCH ports, 0.-m cable Shielded Branch Relay Box DCN-S8CH 8 ports, 0.-m cable Peripheral Devices 6

3 Environment-resistive Models for Thick Wires with 7/8-6UN Mini Connectors Product Appearance Model Specifications DCN- T-branch Connector Sealed T-branch Connector DCN- T-branch Connector (Branch connector is M.) Sealed Connector with Terminating Resistor DRS- Plug DCA-CN0W ength (): m DCA-CN0W DCA-CN0W ength (): m ength (): m Cable with connectors on both ends DCA-CN0W ength (): 0 m DCA-CN0F ength (): m 0 mm DCA-CN0F DCA-CN0F ength (): m ength (): m Cable with connector on one end (socket) Cables with Sealed Connectors DCA-CN0F DCA-CN0H ength (): 0 m ength (): m 0 mm DCA-CN0H DCA-CN0H ength (): m ength (): m Cable with connector on one end (plug) DCA-CN0H ength (): 0 m DCA-CN0W DCA-CN0W DCA-CN0W DCA-CN0W ength (): m ength (): m ength (): m ength (): 0 m Cable with connectors on both ends Thin cable M socket Panel-mounting Connector (female) DCA-CNCP Panel-mounting connector (socket) with 0.-m cable Panel-mounting Connector (male) DCA-CNCM Panel-mounting connector (plug) with 0.-m cable Panel-mounting Connector (male) XSM-D- Panel-mounting connector (plug) DIP terminals Waterproof Cap (for Plug) - XSZ- Waterproof Cap (for Socket) - XSZ- Used to cover an unused connector section. 66 Peripheral Devices

4 Specifications Environment-resistive Connection Products (for Thin Cable, M Micro Connectors) Item Rated current Rated voltage Contact resistance (connector) Insulation resistance Dielectric strength (connector) Ambient operating temperature Storage temperature range Degree of protection Insertion durability Type A VDC Connectors with Cables DCA-CN@@@ Environment-resistive Models (for Thin Wires and M Micro Connectors) Environment-resistive Models for Thick Wires with 7/8-6UN Mini Connectors * The rated current between thick wires is 8 A. 0 mω max. (at 0 mvdc max. and 00 ma max.),000 MΩ min. (at 00 VDC) T-branch Connector DCN-,00 VAC for 60 seconds (leakage current: ma max.) -0 C to 6 C - C to 70 C IEC IP67 00 times Assembling-type Connector XS@-DS7 Cable strength 8 N for s -- Vibration resistance Item Rated current Rated voltage Contact resistance (connector) Insulation resistance Dielectric strength (connector) Ambient operating temperature Storage temperature range Degree of protection Insertion durability Type Connectors with Terminating Resistor DRS-@ No current interruptions of more than µs while performing simple vibrations at either 0 to 00 Hz with.-mm full amplitude or at acceleration 00 m/s, whichever is smaller A VDC Connectors with Cables DCA-CS@@@ 0 mω max. (at 0 mvdc max. and 00 ma max.),000 MΩ min. (at 00 VDC) T-branch Connector DCN-S Connectors with Terminating Resistor DRS-@S Branch Relay Box DCN-S@CH,00 VAC for 60 seconds (leakage current: ma max.),000 VAC for 60 seconds -0 C to 6 C - C to 70 C IEC IP67 00 times Cable strength 8 N for s -- Vibration resistance ock strength ock force Item Type No current interruptions of more than µs while performing simple vibrations at either 0 to 00 Hz with.-mm full amplitude or at acceleration 00 m/s, whichever is smaller Pulling: 00 N/ s, Rotating: N m/ s 0. to 0. N m Connectors with Thick Cables DCA-CN@@@ Connectors with Thin Cables DCA-CN@@W T-branch Connector DCN- T-branch Connector DCN- Rated current 8 A A 8 A A * 8 A Rated voltage Contact resistance (connector) Insulation resistance Dielectric strength (connector) Ambient operating temperature Storage temperature range Degree of protection Insertion durability VDC 0 mω max. (at 0 mvdc max. and 00 ma max.),000 MΩ min. (at 00 VDC),00 VAC for 60 seconds (leakage current: ma max.) -0 C to 6 C - C to 70 C IEC IP67 00 times Connectors with Terminating Resistor DRS- Panel Mounting Connector DCA-CNCP Panel Mounting Connector XSM-D- Cable strength 8 N for s -- 8 N for s -- Vibration resistance No current interruptions of more than µs while performing simple vibrations at either 0 to 00 Hz with.-mm full amplitude or at acceleration 00 m/s, whichever is smaller Peripheral Devices 67

5 Dimensions Environment-resistive Connection Products (for Thin Cable, M Micro Connectors) Cables with Connectors on Both Ends DCA-CN@@W - DRAIN Red V+ Black V- White CAN H Blue CAN (cable length).7 M M Cables with Connector on Single End (Socket) DCA-CN@@F - DRAIN Red V+ Black V- White CAN H Blue CAN 0.7 (cable length) M 0 Cables with Connector on Single End (Plug) DCA-CN@@H - DRAIN Red V+ Black V- White CAN H Blue CAN (cable length).7 T-branch Connector DCN CN0 M Connections Diagram Plug CN0 (IN) Socket CN (OUT) (6).7 CN.6 CN Socket CN (OUT). dia. 8 dia. (Countersinking: ) 0 SHIED V+ V- CAN H CAN Connectors with Terminating Resistance DRS- (Plug) DRS- (Socket) M. dia..7 0 DRAIN : NC V+ : NC V- : NC CAN H : CAN : Ω Note: Terminating resistance ( Ω) is connected between terminals and. 8. dia..6 dia. 8 Note: The diagram shows the DRS- (plug). 68 Peripheral Devices

6 Panel-mounting Connector (Socket) with 0. m Cable DCA-CNCP - DRAIN Red V+ Black V- White CAN H Blue CAN M6 nut Rubber bushing Heat-shrinking tube XSP-D Panel-mounting Connector (Socket), Solder-cup Terminals XSP-D- 7 M6 nut M6. 7 Panel Cutout Dimensions 6 dia dia. M dia. ] Panel-mounting Connector (Plug) with 0. m Cable DCA-CNCM - DRAIN Red V+ Black V- White CAN H Blue CAN M6 nut Rubber bushing Heat-shrinking tube XSM-D Panel-mounting Connector (Socket), Solder-cup Terminals XSM-D- 7 dia. M6 nut M M6 Sealing rubber 7 Panel Cutout Dimensions 6 dia dia. M dia. Peripheral Devices 6

7 Environment-resistive Models (for Thin Wires and M Micro Connectors) Cables with Connectors on Both Ends DCA-CS@@W - DRAIN Red V+ Black V- White CAN H Blue CAN (cable length).7 M M Cables with Connector on Single End (Socket) DCA-CS@@F - DRAIN Red V+ Black V- White CAN H Blue CAN 0.7 (cable length) M ] Cables with Connector on Single End (Plug) DCA-CS@@H - DRAIN Red V+ Black V- White CAN H Blue CAN (cable length).7 T-branch Connector DCN-S..6 M Plug CN0 (IN) Socket CN (OUT) (6) CN0 Connections Diagram CN Socket CN (OUT) CN. dia. 8 dia. (Countersinking: ) 0 SHIED V+ V- CAN H CAN M Connectors with Terminating Resistance DRS-S (Plug) DRS-S (Socket) DRAIN : NC V+ : NC V- : NC CAN H : CAN : Ω Note: Terminating resistance ( Ω) is connected between terminals and.. dia dia. dia. 8 Note: The diagram shows the DRS- (plug). 70 Peripheral Devices

8 Shielded Branch Relay Box with Four Ports DCN-SCH 7 7. dia dia M 0. Connections Diagram PORT PORT PORT PORT - DRAIN Red V+ Black V- White CAN H Blue CAN Shielded Branch Relay Box with Eight Ports DCN-S8CH 7 7 M. dia. dia dia Connections Diagram PORT PORT PORT PORT PORT PORT 6 PORT 7 PORT 8 - DRAIN Red V+ Black V- White CAN H Blue CAN Peripheral Devices 7

9 Environment-resistive Models for Thick Wires with 7/8-6UN Mini Connectors Thick Cable with Connectors on Both Ends ( Conductors for Communications) DCA-CN@@W 6. dia. 6 dia. 6 dia. 6. Terminal No. Color Name - DRAIN Red V+ Black V- White CAN H Blue CAN Thick Cable with Connector Socket on One End ( Conductors for Communications) DCA-CN@@F 6 dia. 6. dia. 0 Terminal No. Color Name - DRAIN Red V+ Black V- White CAN H Blue CAN Thick Cable with Connector Plug on One End ( Conductors for Communications) DCA-CN@@H 6 dia. 6. dia. 0 Terminal No. Color Name - DRAIN Red V+ Black V- White CAN H Blue CAN Thin Cable with Connectors on Both Ends ( Conductors for Communications) DCA-CN@@W 6. 6 dia. 6 dia.. dia. 0.7 Terminal No. Color Name - DRAIN Red V+ Black V- White CAN H Blue CAN Thin Cable with Panel-mounting Connector Socket on One End ( Conductors for Communications) DCA-CNCP M0. dia. Note: A rubber seal and nut for panel mounting are included. Panel Cutout Dimensions 0 dia min. Terminal Color No. Name - DRAIN Red V+ Black V- White CAN H Blue CAN 7 Peripheral Devices

10 Panel-mounting Connector (Plug) with 0. m Cable DCA-CNCM (sequence pin) 6 M0. O-ring dia. 00 Note: A nut is included. 0 Terminal Color No. Name - DRAIN Red V+ Black V- White CAN H Blue CAN T-branch Connector ( Conductors for Communications, Thick Wire Branch ine) DCN dia. DN-.6 CN0 CN.7 Connections Diagram CN Plug CN0 (IN) Socket CN (OUT) Socket CN (OUT) DRAIN V+ V- CAN H CAN 8. T-branch Connector ( Conductors for Communications, Thin Wire Branch ine) DCN dia. CN0. dia. DN- CN CN Connections Diagram Plug CN0 (IN) Socket CN (OUT) Socket CN (OUT) DRAIN V+ V- CAN H CAN. 8. Peripheral Devices 7

11 Connector (Plug) with Terminating Resistance DRS- Panel-mounting Connector ( Pins for Communications) XSM-D- DRAIN : NC V+ : NC V- : NC CAN H : Ω CAN : Note: Terminating resistance ( Ω) is connected between terminals and. 0 M. dia. 6 dia Panel Cutout Dimensions 8.. PCB Processing Dimensions dia ,.8 dia.. dia..8 7 min. Note: A rubber seal and nut for panel mounting are included. 7 Peripheral Devices

12 Read and Understand This Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and imitations of iability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPIED, REGARDING NON-INFRINGEMENT, MERCHANTABIITY, OR FITNESS FOR PARTICUAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWEDGES THAT THE BUYER OR USER AONE HAS DETERMINED THAT THE PRODUCTS WI SUITABY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCAIMS A OTHER WARRANTIES, EXPRESS OR IMPIED. IMITATIONS OF IABIITY OMRON SHA NOT BE RESPONSIBE FOR SPECIA, INDIRECT, OR CONSEQUENTIA DAMAGES, OSS OF PROFITS OR COMMERCIA OSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CAIM IS BASED ON CONTRACT, WARRANTY, NEGIGENCE, OR STRICT IABIITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHA OMRON BE RESPONSIBE FOR WARRANTY, REPAIR, OR OTHER CAIMS REGARDING THE PRODUCTS UNESS OMRON'S ANAYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERY HANDED, STORED, INSTAED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. Application Considerations SUITABIITY FOR USE OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPICATION INVOVING SERIOUS RISK TO IFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERY RATED AND INSTAED FOR THE INTENDED USE WITHIN THE OVERA EQUIPMENT OR SYSTEM. PROGRAMMABE PRODUCTS OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof. Disclaimers CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and imitations of iability. ERRORS AND OMISSIONS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. OMRON Corporation Industrial Automation Company In the interest of product improvement, specifications are subject to change without notice. (c)copyright OMRON Corporation 0 All Right Reserved.