BEDROCK Open Secure Automation Features and Benefits

Transcription

1 BEDROCK Open Secure Automation Features and Benefits

2 Table of Contents OSA Open Secure Automa on & Cyber Security Pla orm Features and Benefits 1 BMI Backplane Module Interconnects Overall Features and Benefits 2 SPM Secure Power Modules Pla orm Features and Benefits 3 SCC Secure Control & Communica on Modules Pla orm Features and Benefits 4 Secure Input/Output Modules Pla orm Features and Benefits 5 U.10 Universal Input/Output, 10 Channel, Channel Isolated 4-20 ma, 0-10 V dc, NAMUR, 5, 12, 24 V dc, khz 6 UE.5 Ethernet Communica on, 5 Channel, Channel Isolated 7 US.5 Serial Communica on, 5 Channel, Channel Isolated Universal Analog Input/Output, 5 Channel, Channel Isolated 4-20 ma, mv, thermocouple, RTD Universal Discrete Input, 10 Channel, Channel Isolated V ac/dc Universal Discrete Output, 10 Channel, Channel Isolated V ac/dc Discrete Input, 10 Channel, Group Isolated 5, 12, 24 V dc, > 100 Hz Counter, khz Analog Input, 20 Channel, Group Isolated 4-20 ma Discrete Input, 20 Channel, Channel Isolated 24 V dc nominal, 42 V ac, 60 V dc Discrete Output, 20 Channel, Channel Isolated 24 V dc nominal 15 UPS Cyber Secure Power Series UPS.500 Cyber Secure Uninterrup ble Power Supply, Panel/Wall/Pipe Mounted 16 SPS.500 Cyber Secure Power Supply 17 BRSCOMPM_A

3 BEDROCK Open Secure Automation & Cyber Security Platform Features and Benefits OSA BEDROCK OSA PLATFORM Bedrock Open and Secure Automa on (OSA ) is a standards-based, state of the art universal pla orm with patented intrinsic cyber security. All Bedrock products come with a 5-year warranty and a non-obsolescence guarantee. Fewest number of so ware defined modules. All system modules and backplanes are sealed allmetal construc on. Advanced patented analog and digital electronic designs. 40 to + 80 C extreme opera ng temperature. Heat sinks & passive convec ve cooling for all system components & modules. FREE IEC compliant Integrated Development Environment (IDE) & embedded simulator with unlimited tags and users. BEDROCK OSA CYBER SECURITY Intrinsic, layered & embedded cyber defense built into every module for end-point root of trust. Cer fica on Authority infrastructure for user administra on & access control. USER Highest levels of intrinsic cyber defense. Extreme durability, reliability & availability. Open Engineering tools for PLC, DCS, RTU & Safety applica ons. Lowest user lifecycle costs. Reduced lifecycle cost and confidence in technology. 50+ years life expectancy. Reduced engineering, configura on & installa on me. Reduced maintenance spares. Intrinsic an -tamper cyber hardening to FIPS140-2 compliance. Shock & vibra on hardened per IEC and more. Extreme performance & so ware defined func onality. Meets or exceeds all North American & European standards for ordinary and Class I, Division 2 loca ons. CISPR 11, IEC 61000, MIL-STD tested, EMP & EFT hardened. Extreme thermal performance with holis c thermal coupling. No secondary hea ng/cooling required. Maximize available user site loca ons. Standard programming tools with support for Ladder, Sequen al Func on Chart, Structured Text, Instruc on List & Func onal Block Diagram. It doesn t get any be er. USER Intrinsic. Advanced. Extreme ease of use. NO COST extreme levels of cyber protec on & authen ca on of hardware, firmware, applica ons & users. Holis c & intrinsic security extending from the IIoT edge devices to networks & applica ons in the informa on, engineering & opera ons technology domains. OSA 1 / 17

4 BEDROCK Backplane Module Interconnects Overall Features and Benefits BMI BEDROCK BLACK FABRIC BACKPLANE Patented pinless I/O interconnec on using electromagne c coupling for backplane power and communica on. Available in 5, 10 or 20 I/O slots. Sealed all-metal construc on with no ac ve electronics. I/O slots and modules have symmetric power and communica ons. Dual redundant power and control slots on BMI.10 & BMI.20. Patented parallel, full duplex, redundant, high speed communica on architecture with 20 Mb bandwidth at every BMI I/O slot. USER Extreme reliability. Extreme EMP and EFT hardened. Extreme intrinsic galvanic isola on of all communica ons and all power channels for all I/O modules. Extreme intrinsic cyber defense. Scalable. Support for 19-inch rack mount or wall mount. Horizontal or ver cal moun ng. Decimal granularity for sizing and installa on simplicity. Highest calculated MTBF possible for an ICS. Independent loca on and orienta on for op mal system engineering best prac ces and cable management. Direct coupling. Intrinsic interconnec on. Secure redundancy interlink. Scalable redundancy and availability. Maximum performance for PLC & DCS applica ons. No degrada on with system load. BMI 2 / 17

5 BEDROCK Secure Power Modules Platform Features and Benefits SPM BEDROCK OSA POWER Available as single or dual redundant configura ons. Dual 24 V dc OR ed inputs. Secure 24 V dc output up to 5 A. SPM.U model has an addi onal wide ac or dc voltage/frequency input. Provides isolated system power from up to 3 sources. Provides isolated system power for all controllers, I/O modules and field devices. Advanced digital design. IEEE 1588 Time Synchroniza on compliant. Sealed all-metal construc on. USER Flexible and scalable redundancy for increased availability. Supports worldwide voltage and frequency types. Ease of installa on and use. Eliminates requirement of a field ac/dc supply. Reduced enclosure footprint. Extreme digital power performance for diagnos cs, efficiency, and communica on. Advanced intrinsic cyber security for authen cated hardware & so ware. Improved up me, analy cs, and predic ve maintenance. Advanced me synchroniza on and me stamping. SOE enabled. Extreme thermal performance with holis c thermal coupling. No secondary hea ng/cooling required. FIPS140-2 compliance for an tamper. Power 3 / 17

6 BEDROCK Secure Control & Communication Modules Platform Features and Benefits SCC BEDROCK OSA CONTROLLER Available as single or dual redundant configura ons. BMI Backplane coupled. Cyber secure 32-bit, dual-core ARM Cortex processor with advanced secure real- me opera ng system (RTOS). 512 MB program memory. 8 or 32 GB flash memory. Up to 1 Gb/s Ethernet control network available as: SFP 10/100/1000 Mb/s copper. SFP 1 Gb/s single or mul -mode fiber. IEEE 1588 Time Synchroniza on compliant. 1 millisecond I/O read. 1 millisecond I/O write. Advanced diagnos cs. Each single/dual redundant controller supports: Up to 4000 I/O. Up to 60 miles of I/O distribu on. Embedded OPC UA server. USER Flexible and scalable redundancy. Simplified integral power and communica ons interconnec on. Integrated, isolated, full-duplex redundancy interlink. An -snoop for intrinsic cyber hardening. Extreme digital power performance for diagnos cs, efficiency, and communica on. Advanced intrinsic cyber security for authen cated hardware, so ware, and applica ons. Separa on kernel for highest reliability and cyber security. Highest in the industry. Ready for advanced control applica ons. Extreme performance. User flexibility. Ease of use. Advanced me synchroniza on and me stamping. SOE enabled. Extreme I/O scan performance, independent of I/O load or system size. Determinis c I/O read/write. Improved up me, analy cs, and predic ve maintenance. Installa on flexibility. Extreme performance. Cost benefits. Open standards based. Compa ble with numerous HMI/SCADA applica ons. Control 4 / 17

7 BEDROCK Secure Input/Output Modules Platform Features and Benefits BEDROCK OSA SECURE I/O Pinless electromagne c interconnec on between the module and the BMI backplane. Hot swappable. Dual power and dual 20 Mb communica ons with every module. Symmetric induc ve coupling. Scalable single/dual/triple redundancy. Cyber secure 32-bit ARM Cortex processor. IEEE 1588 time synchroniza on compliant. 1 millisecond read. 1 millisecond write. Universal I/O Cable with versa le 180 rota onal knuckle. USER Extreme reliability. Extreme EMP and EFT hardened. Intrinsic galvanic isola on. Extreme intrinsic cyber defense. Independent I/O module loca on and orienta on for op mal system engineering best prac ces. Flexible and scalable redundancy. High performance. Advanced intrinsic cyber security for authen cated hardware, so ware, and applica ons. Advanced me synchroniza on and me stamping of all analog and discrete I/O variables. SOE enabled. Extreme performance. Determinis c I/O read/write. One cable for all I/O signal types. Drama cally simplifies field wiring and rou ng. Available in pre-configured or custom lengths. Full 180 range of mo on. 45 detents. 5 / 17

8 BEDROCK Secure Input/Output Module Universal Input/Output, 10 Channel, Channel Isolated U.10 The U.10 is a ten channel, universal secure input/output module. Per channel, so -selectable analog input/output range from 4-20 ma. Per channel, so -selectable analog input range from 0-10 V dc. Per channel, so -selectable discrete input/output range from 0-30 V dc. Per channel, so -selectable NAMUR or counter input for pulses up to 100 khz. Supports HART Revision 7. Integrated electronic fusing. Integrated analog and digital readback. Per channel, so -selectable overcurrent limi ng. Per channel, so -selectable overcurrent retry limit and period. Per channel, so -selectable fail-safe mode. Advanced signal & module diagnos cs. Per channel, channel-to-channel and channel-to-ground galvanic isola on. Pinless induc ve interconnec on to BMI. Hot Swappable Up to 3 ms controller update me. Sequence of Events enabled with me stamp accuracy to ± 0.5 ms. So -selectable contactor debounce me. The most advanced & flexible universal input/output module in the automa on industry. Controller update me that rivals or be ers today's PLC & DCS. So ware configurable contactor debounce me eliminates false trips. Electronic fusing reduces or eliminates addi onal marshalling requirements. Overcurrent limi ng with so ware configurable retries protects against field faults while a so ware configurable fail-safe mode maintains the field device value in the event of a communica on failure. Triple redundant U.10 modules shown. Front (Module Status Indication) Cable A Cable B Rear (Pinless Backplane Interconnect) UIO.10 6 / 17

9 BEDROCK Secure Input/Output Module Ethernet Communication, 5 Channel, Channel Isolated UE.5 The UE.5 is a five channel, universal secure Ethernet communica on module. Supports Ethernet-based protocols like Ethernet/IP, Modbus TCP & OPC UA. Per channel, port speed of 10/100 Mbps and full or half duplex. PoE supported on every channel, up to 125 W total power. Pinless induc ve interconnec on to BMI. Hot Swappable The most advanced Ethernet communica on module in the automa on industry. A cyber secure interface to current & legacy Ethernet devices at the I/O network level. So ware defined concurrent protocols on every channel. PC.POE PSE PINOUT ALTERNATIVES Abbr. Pin No. Function RET 1 Return V dc PE 3 Protec ve Earth/Gnd for system Conductor Alternative A (MDI) Alternative B (All) V dc from PSE V dc from PSE 3-48 V dc from PSE V dc from PSE V dc from PSE 6-48 V dc from PSE 7-48 V dc from PSE 8-48 V dc from PSE UE.5 module shown. Front (Module Status Indication) Alt A Alt A Alt A Alt B Alt B RJ-45 Cat. 5 PD/PSE Data Cable(s) User Supplied PC.POE Power Over Ethernet Cable(s) Rear (Pinless Backplane Interconnect) UE.5 7 / 17

10 BEDROCK Secure Input/Output Module Serial Communication, 5 Channel, Channel Isolated US.5 The US.5 is an advanced 5 channel serial communica on I/O module with intrinsic cyber security. Per channel, so -selectable communica on modes of RS-232, RS-485 or RS-485 (2-wire or 4-wire) up to 230,400 bps. Per channel, so -selectable parity, data bit, stop bit and flow control. Dedicated processor per channel. Pinless induc ve interconnec on to BMI. Hot Swappable Cyber secure interface to legacy industrial serial devices including printers, scanners, analyzers and sensors. Maximum user flexibility in defining the communica on interface. Low cost configura on and maintenance for gateways. PC.SER SERIAL CABLE PINOUT Pin No. RS-232 RS-485 RS-422/RS-485 Full Duplex 2 RXD RXD+ 3 TXD DATA+ TXD+ 5 GND GND GND 7 RTS DATA- TXD- 8 CTS RXD- US.5 module shown. Front (Module Status Indication) PC.SER Serial Cable(s) PC.SER Serial Cable(s) Rear (Pinless Backplane Interconnect) US.5 8 / 17

11 BEDROCK Secure Input/Output Module Universal Analog Input/Output, 5 Channel, Channel Isolated 1.5 The 1.5 is a five channel, secure universal analog input/output module. Per channel, so -selectable analog input sensor types and ranges for 4-20 ma, mv, T/C (Type J, K, B, E, N, R, S or T) or 3 or 4-wire RTD. Per channel, so -selectable as input or output. Per channel, so -selectable for internal or external power. Supports HART Revision 7. Integrated analog readback. Per channel, so -selectable fail-safe mode. Advanced signal & module diagnos cs. Per channel, channel-to-channel and channel-to-ground galvanic isola on. Pinless induc ve interconnec on to BMI. Hot Swappable Extremely fast I/O update mes. Sequence of Events enabled with me stamp accuracy to ± 0.5 ms. Supports single/dual/triple modular redundancy. The most advanced & flexible universal analog input/output module in the automa on industry. Reduced engineering and installa on complexity. Scalable redundancy to the user applica on. Reduced project and lifecycle cost. Triple Redundant 1.5 modules shown. Front (Module Status Indication) Cable A Rear (Pinless Backplane Interconnect) UAIO.5 9 / 17

12 BEDROCK Secure Input/Output Module Universal Discrete Input, 10 Channel, Channel Isolated 2.10 The 2.10 is a ten channel, universal secure discrete input module. Per channel, so -selectable discrete input range from V. Per channel, so -selectable discrete input voltage of ac or dc. Capable of detec ng nega ve or posi ve dc voltages. Per channel, channel-to-channel and channel-to-ground galvanic isola on. Pinless induc ve interconnec on to BMI. Hot Swappable Up to 3 ms controller update me. Sequence of Events enabled with me stamp accuracy to ± 0.5 ms. So -selectable contactor debounce me. The most advanced universal discrete input module in the automa on industry. Controller update me that rivals or be ers today's PLC & DCS. So ware configurable contactor debounce me eliminates false trips. Triple redundant 2.10 modules shown. Front (Module Status Indication) Cable A Rear (Pinless Backplane Interconnect) UDI / 17

13 BEDROCK Secure Input/Output Module Universal Discrete Output, 10 Channel, Channel Isolated 3.10 The 3.10 is a ten channel, universal secure discrete output module. Ten V discrete output channels. ac or dc excita on output voltage. Integrated electronic fusing. Per channel, so -selectable overcurrent limi ng. Per channel, so -selectable overcurrent retry limit and period. Per channel, so -selectable fail-safe mode. Advanced signal & module diagnos cs. Per channel, channel-to-channel and channel-to-ground galvanic isola on. Pinless induc ve interconnec on to BMI. Hot Swappable Up to 3 ms controller update me. Sequence of Events enabled with me stamp accuracy to ± 0.5 ms. The most flexible universal discrete output module in the automa on industry. Electronic fusing reduces or eliminates addi onal marshalling requirements. Overcurrent limi ng with so ware configurable retries protect against field faults while a so ware configurable fail-safe mode maintains the field device value in the event of a communica on failure. Triple redundant 3.10 modules shown. Front (Module Status Indication) Cable A Rear (Pinless Backplane Interconnect) UDO / 17

14 BEDROCK Secure Input/Output Module Discrete Input, 10 Channel, Group Isolated 5.10 The 5.10 is a ten channel, secure high-speed discrete input module. Per channel, so -selectable discrete input range from 5-24 V dc. Per channel, so -selectable counter input for pulses greater than 100 Hz. Per channel, so -selectable frequency input up to 100 khz. Advanced signal & module diagnos cs. One group of 10 channels with group to ground galvanic isola on. Pinless induc ve interconnec on to BMI. Hot Swappable Up to 3 ms controller update me. Sequence of Events enabled with me stamp accuracy to ± 0.5 ms. So -selectable contactor debounce me. The most advanced high-speed discrete input module in the automa on industry. Controller update me that rivals or be ers today's PLC & DCS. So ware configurable contactor debounce me eliminates false trips. Triple redundant 5.10 modules shown. Front (Module Status Indication) Cable A Rear (Pinless Backplane Interconnect) DI / 17

15 BEDROCK Secure Input/Output Module Analog Input, 20 Channel, Group Isolated 6.20 The 6.20 is a twenty channel, secure analog input module. Twenty high density 4-20 ma analog input channels. Supports HART Revision 7. Advanced signal & module diagnos cs. Two groups of 10 channels, each with group to ground galvanic isola on. Pinless induc ve interconnec on to BMI. Hot Swappable Extremely fast controller update me. Sequence of Events enabled with me stamp accuracy to ± 0.5 ms. Extreme user performance & value with the highest possible I/O density. Triple redundant 6.20 modules shown. Front (Module Status Indication) Cable A Cable B Rear (Pinless Backplane Interconnect) AI / 17

16 BEDROCK Secure Input/Output Module Discrete Input, 20 Channel, Channel Isolated 7.20 The 7.20 is a twenty channel, low voltage, secure discrete input module. Twenty high density discrete 24 V dc nominal input channels. Per channel discrete input range from 0-60 V. Per channel, so -selectable discrete input voltage of ac or dc. Capable of detec ng nega ve or posi ve dc voltages. Advanced signal & module diagnos cs. Per channel, channel-to-channel and channel-to-ground galvanic isola on. Pinless induc ve interconnec on to BMI. Hot Swappable Up to 3 ms controller update me. Sequence of Events enabled with me stamp accuracy to ± 0.5 ms. So -selectable contactor debounce me. Extreme user performance & value with the highest possible I/O density. Controller update me that rivals or be ers today's PLC & DCS. So ware configurable contactor debounce me eliminates false trips. Triple redundant 7.20 modules shown. Front (Module Status Indication) Cable A Cable B Rear (Pinless Backplane Interconnect) DI / 17

17 BEDROCK Secure Input/Output Module Discrete Output, 20 Channel, Channel Isolated 8.20 The 8.20 is a twenty channel, low voltage, secure discrete output module. Twenty high density 24 V dc nominal discrete output channels. Integrated electronic fusing. Per channel, so -selectable overcurrent limi ng. Per channel, so -selectable overcurrent retry limit and period. Per channel, so -selectable fail-safe mode in the event of communica on failure. Advanced signal & module diagnos cs. Per channel, channel-to-channel and channel-to-ground galvanic isola on. Pinless induc ve interconnec on to BMI. Hot Swappable Up to 3 ms controller update me. Sequence of Events enabled with me stamp accuracy to ± 0.5 ms. Extreme user performance & value with the highest possible I/O density. Electronic fusing reduces or eliminates addi onal marshalling requirements. Overcurrent limi ng with so ware configurable retries protect against field faults while a so ware configurable fail-safe mode maintains the field device value in the event of a communica on failure. Triple redundant 8.20 modules shown. Front (Module Status Indication) Cable A Cable B Rear (Pinless Backplane Interconnect) DO / 17

18 BEDROCK Cyber Secure Power Series Cyber Secure Uninterruptible Power Supply, Panel/Wall/Pipe Mounted UPS UPS.500 The UPS.500 Cyber Secure Uninterrup ble Power Supply provides the most advanced cyber secure 24 V dc uninterrup ble power in the automa on industry. Industry leading power density with 12 Ah Lithium-ion ba eries. Advanced digital design. 10/100 Mb Ethernet with IPv4, IPv6 & IEC OPC Unified Architecture compliance. IEEE 1588 me synchroniza on compliant for Sequence of Events. Dust ght & immersion up to 1 meter of water ingress protec on (IP67, NEMA 6). Pipe or wall mountable. With so -selectable control variables and advanced communica on compliance the UPS.500 is the most advanced IIoT, 24 V dc uninterrup ble power supply in the automa on industry. So ware configurable charging power and hold up me ensure op mal applica on reliability while reducing requirements for both plant power & HVAC heat load. Extreme enviromental hardening provides for no secondary containment, fanless cooling & completely water submersible for the most remote & distributed installa ons. Pipe mounted UPS.500 with watertight connectors shown. Panel/Wall Mount Mounting hole dimensions: width = mm height = 88.9 mm Pipe Mount (for 2 Schedule 40 pipe) UPS.500 Cable(s): UPSPOWRIN, UPSPOWOUT, UPSRLYCBL, IP rated Ethernet Connector CI00100 Bottom View (Watertight connections) Power 16 / 17

19 BEDROCK Cyber Secure Power Series Cyber Secure Power Supply SPS SPS.500 The SPS.500 Cyber Secure Power Supply provides the most advanced cyber secure 24 V dc power to be er the cost, performance & security requirements of most process applica ons. Supports worldwide voltages & frequencies. So -selectable output voltage. Advanced digital design. Peak efficiency > 94 % & power factor correc on > /100 Mb Ethernet with IPv4, IPv6 & IEC OPC Unified Architecture compliance. IEEE 1588 me synchroniza on compliant for Sequence of Events. Integrated redundancy for OR ing output. Dust ght & immersion up to 1 meter of water ingress protec on (IP67, NEMA 6). Pipe or wall mountable. With so -selectable control variables and advanced communica on compliance the SPS.500 is the most advanced IIoT, 24 V dc power supply in the automa on industry. Superior power efficiency & factor correc on ensure a maximum delivered supply while reducing requirements for both plant power & HVAC heat load. Output voltage is so ware configurable for easier tuning of the field equipment voltage drop. No poten ometers to set in the field. Extreme enviromental hardening provides for no secondary containment, fanless cooling & completely water submersible for the most remote & distributed installa ons. Pipe mounted SPS.500 with watertight connectors shown. Panel/Wall Mount Mounting hole dimensions: width = mm height = 91.2 mm Pipe Mount (for 2 Schedule 40 pipe) SPS.500 Cable(s): UPSPOWRIN (MI00134), UPSPOWOUT, UPSRLYCBL Bottom View (Watertight connections) Power 17 / 17

20 on.com Corporate Headquarters San Jose, California East Coast Office Boston, Massachuse s Phone: +1 (781) Support available from 8 am to 8 pm EST Fax: +1 (781) Technical Support: support@bedrockautoma on.com Bedrock, Open Secure Automa on, OSA & Black Fabric are trademarks of Bedrock Automa on. All other trademarks are property of their respec ve owners. Bedrock Automa on intellectual property is protected within the United States and interna onally by the following Patents, Patents Pending and Applica ons as applied within each country. Canada Patent No s , , , App. No s. 2,875,515, 2,875,517, 2,875,518, 2,920,133 China Patent No s. ZL , ZL , ZL X, ZL App. No s , , , , , , , , , , , X, , , , , , , X Europe Patent No s , , , , App. No s , , , , , , , , , , , , , , , , , , , , Japan Patent No s , , , , App. No s , , , , , , , , , , , , , , 2357/2014, 2358/2014, 2359/2014, 2360/2014, 2361/2014 Korea Patent No s , , , , App. No s , , , , Taiwan Patent No s. D App. No s United States Patent No s. 8,862,802, 8,868,813, 8,971,072, 9,191,203, D714,213, D721,706, D721,707, D758,978 App. No s. 13/341,143, 13/341,161, 13/341,176, 13/875,858, 13/959,888, 14/381,140, 14/401,969, 14/446,412, 14/449,722, 14/469,931, 14/501,974, 14/502,006, 14/519,032, 14/519,047, 14/519,066, 14/597,498, 14/618,292, 14/918,558, 14/942,305, 15/096,701, 15/248,006, 15/287,937, 15/289,379, 15/289,613, 15/381,667, 29/462,572, 29/462,574, 29/462,575, 29/462,576 Copyright 2017 Bedrock Automa on. All rights reserved. BRSCOMPM_A