Antenna Kits for 900 MHz

Transcription

1 Antenna Kits for 900 MHz Antenna Kit BWA-ANTKIT-00 The high-gain omni-directional antenna kit includes a 6 dbd fiberglass antenna. Part No: BWA-9O6-A Antenna, Omni, MHz, 6 dbd, 6 ft Fiberglass, N-Type FEMALE, with mounting hardware 90 BWC-MNFN6 LMR00, N-Type Male to N-Type Female, 6 m BWC-LFNBMN-DC Surge Suppressor, Bulkhead, N-Type Female to N-Type Male, dc blocking 86 BWC-MRSMN05 LMR00, RP-SMA to N-Type Male, 0.5 m Manual (p/n 60), the SureCross Installation Guide (p/n 55), or Antenna Basics (p/n ). Printed in USA Aug 0 P/N 599 rev. B

2 Antenna Kit BWA-ANTKIT-00 The mid-range gain omni-directional antenna kit includes a 5 dbi rubber swivel antenna. Part No: 895 BWA-9O5-C Antenna, Omni, MHz, 5 dbi, Rubber swivel, RP-SMA Male 88 BWC-MRSFRSB RG58, RP-SMA to RP-SMA Female, Bulkhead, m 996 BWC-LMRSFRPB Surge Suppressor, Bulkhead, RP-SMA 85 BWC-MRSFRSB0 RG58, RP-SMA to RP-SMA Female, Bulkhead, 0. m Manual (p/n 60), the SureCross Installation Guide (p/n 55), or Antenna Basics (p/n ). P/N 599 rev. B

3 Antenna Kit BWA-ANTKIT-00 The low-gain omni-directional antenna kit includes a dbi rubber swivel antenna. Part No: BWA-9O-C Antenna, Omni, MHz, dbi, Rubber swivel, RP-SMA Male 88 BWC-MRSFRSB RG58, RP-SMA to RP-SMA Female, Bulkhead, m 996 BWC-LMRSFRPB Surge Suppressor, Bulkhead, RP-SMA 85 BWC-MRSFRSB0 RG58, RP-SMA to RP-SMA Female, Bulkhead, 0. m Manual (p/n 60), the SureCross Installation Guide (p/n 55), or Antenna Basics (p/n ). P/N 599 rev. B

4 Antenna Kit BWA-ANTKIT-00 The low-gain Yagi antenna kit includes a 6.5 dbd Yagi antenna. Part No: BWA-9Y6-A Antenna, Yagi, MHz, 6.5 dbd, N-Type Female 90 BWC-MNFN6 LMR00, N-Type Male to N-Type Female, 6 m BWC-LFNBMN-DC Surge Suppressor, Bulkhead, N-Type Female to N-Type Male, dc Blocking 86 BWC-MRSMN05 LMR00, RP-SMA to N-Type Male, 0.5 m Manual (p/n 60), the SureCross Installation Guide (p/n 55), or Antenna Basics (p/n ). P/N 599 rev. B

5 Antenna Kits for. GHz Antenna Kit BWA-ANTKIT-005 The mid-range gain omni-directional antenna kit includes a dbi. GHz rubber swivel antenna. Part No: BWA-O-C Antenna, Omni,. GHz, dbi, Rubber swivel, RP-SMA Male 88 BWC-MRSFRSB RG58, RP-SMA to RP-SMA Female, Bulkhead, m 996 BWC-LMRSFRPB Surge Suppressor, Bulkhead, RP-SMA 85 BWC-MRSFRSB0 RG58, RP-SMA to RP-SMA Female, Bulkhead, 0. m Manual (p/n 60), the SureCross Installation Guide (p/n 55), or Antenna Basics (p/n ). P/N 599 rev. B 5

6 Antenna Kit BWA-ANTKIT-006 The high-gain omni-directional antenna kit includes a 8.5 dbi. GHz fiberglass antenna. Part No: BWA-O8-A Antenna, Omni,. GHz, 8.5 dbi, -inch Fiberglass, N-Type FEMALE, with mounting hardware 90 BWC-MNFN6 LMR00, N-Type Male to N-Type Female, 6 m BWC-LFNBMN-DC Surge Suppressor, Bulkhead, N-Type Female to N-Type Male, dc blocking 86 BWC-MRSMN05 LMR00, RP-SMA to N-Type Male, 0.5 m Manual (p/n 60), the SureCross Installation Guide (p/n 55), or Antenna Basics (p/n ). 6 P/N 599 rev. B

7 Enclosure Kits Large Fiberglass Enclosure Kit BWA-EF8KIT This enclosure kit includes the 8 Fiberglass enclosure. This larger enclosure is ideal for multiple radios, a power supply, and any additional equipment that may be necessary to solve your application. Part No: 00 9 All other items shown in photo are not included in the kit and are only shown for scale., 8 Enclosure Box Kit Parts List See previously listed Antenna Kits DIN-5-0 DIN Rail Section, 0 mm long, 5 mm design (not shown) 6 6 SMBDX80DIN Bracket Assembly, DIN Rail, for DX80 (not shown) 0 BWA-EF8 Enclosure, Fiberglass, Hinged, x x BWA-PA Panel, x PSDINM--0 Power Supply, V dc, Amp, with DIN-Rail Mount 0 98 BWA-CG.5-0 Cable gland, /-inch NPT, 0 pack P/N 599 rev. B

8 Medium Fiberglass Enclosure Kit BWA-EF086KIT This medium-sized enclosure kit includes the Fiberglass enclosure and is ideal for a power supply and single radio. Part No: 0, 8 9 Enclosure Box Kit Parts List See previously listed Antenna Kits DIN-5-0 DIN Rail Section, 0 mm long, 5 mm design (not shown) 6 6 SMBDX80DIN Bracket Assembly, DIN Rail, for DX80 (not shown) BWA-EF086 Enclosure, Fiberglass, Hinged, 0 x 8 x 6 8 BWA-PA08 Panel, 0 x PSDINM--0 Power Supply, V dc, Amp, with DIN Rail Mount 0 98 BWA-CG.5-0 Cable gland, /-inch NPT, 0 pack 8 P/N 599 rev. B

9 Small Fiberglass Enclosure Kit BWA-EF866KIT This small enclosure kit includes the Fiberglass enclosure and is ideal for a power supply and a radio board module. Part No: 0 5, Enclosure Box Kit Parts List See previously listed Antenna Kits DIN-5-0 DIN Rail Section, 0 mm long, 5 mm design 6 6 SMBDX80DIN Bracket Assembly, DIN Rail, for DX80 (not shown) BWA-EF866 Enclosure, Fiberglass, Hinged, 8 x 6 x BWA-PA86 Panel, 8 x PSDINM--0 Power Supply, V dc, Amp, with DIN Rail Mount 0 98 BWA-CG.5-0 Cable gland, /-inch NPT, 0 pack P/N 599 rev. B 9

10 For more information: Contact your local Banner representative or Banner Corporate Offices around the world. Corporate Headquarters Europe Latin America Banner Engineering Corp. 9 Tenth Ave. North Mpls., MN 55 Tel: sensors@bannerengineering.com Banner Engineering Europe Park Lane Culliganlaan F Diegem B-8 BELGIUM Tel: Fax: mail@bannereurope.com Asia - China Asia - Japan Asia India Banner Engineering China Shanghai Rep Office Rm. G/H/I, 8th Flr. Cross Region Plaza No. 899, Lingling Road Shanghai 0000 CHINA Tel: Fax: sensors@bannerengineering.com.cn Banner Engineering Japan Cent-Urban Building Nishi-Nakajima Yodogawa-Ku, Osaka 5-00 JAPAN Tel: Fax: mail@bannerengineering.co.jp Banner Engineering Asia - Taiwan Neihu Technology Park 8F-, No. 08, Sec., Neihu Rd. Taipei TAIWAN Tel: Fax: info@bannerengineering.com.tw Contact Banner Engineering Corp. (US) or Mexico: mexico@bannerengineering.com Brazil: brasil@bannerengineering.com Banner Engineering India Pune Head Quarters Office No. 00 Sai Capital, Opp. ICC Senapati Bapat Road Pune 06 INDIA Tel: Fax: india@bannerengineering.com Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. The manufacturer does not take responsibility for the violation of any warning listed in this document. CAUTION. Make no modifications to this product. Any modifications to this product not expressly approved by Banner Engineering could void the user s authority to operate the product. Contact the Factory for more information. Lightning Arrestors/Surge Protection. Always use lightning arrestors/surge protection with all remote antenna systems to avoid invalidating the Banner Engineering Corp. warranty. No surge protector can absorb all lightning strikes. Do not touch the SureCross device or any equipment connected to the SureCross device during a thunderstorm. P/N 599 rev. B All specifications published in this document are subject to change. Banner reserves the right to modify the specifications of products, prior to their order, without notice. Banner Engineering reserves the right to update or change documentation at any time. For the most recent version of any documentation, please refer to our website: www. bannerengineering.com Banner Engineering Corp. All rights reserved. Banner Engineering Corp., 9 Tenth Ave. No., Minneapolis, MN USA 55 Phone: sensors@bannerengineering.com