WLB32 Industrial LED Light Bar (DC)

Transcription

1 WLB Industrial LED Light Bar (DC) Datasheet Model without Motion Detector Model with Motion Detector Model with Eye Shield and Motion Detector Banner s WLB is an ultra-bright LED fixture that features an even light output for a no glare glow. Suitable for a variety of environments and applications, including work stations, machine lighting, control cabinets, and manufacturing lines, the WLB uses advanced LED lighting technology to provide a high-quality and maintenance free industrial lighting solution for years. Highly energy efficient for overall cost savings High/Low/Off switch Models with eye shield block side glare Daisy chain power to multiple lights Motion detection models available Metal housing, shatterproof window Easy installation with snap clips, or a choice of magnetic or angle brackets WLB Industrial LED Light Bars are available as cascadable models that can be "daisy-chained" together for a continuous length of lighting, with a minimum of wiring. Each light bar can be turned to high, low, or off independently of the other lights, upstream or downstream, in the chain. A double-ended accessory cordset must be used between each pair of cascading lights. to V dc Models Models Lighted Length (mm) Connector Lumens WLBC85PBQ WLBC57PBQ 57 -pin M Quick Disconnect WLBC85PBQ WLBCPBQ 6 WLBC85PB WLBC57PB 57 m (6.5 ft) cable WLBC85PB WLBCPB 6 To order the light without the integral switch, omit the "PB" from the model number. For example, WLBC85Q. To order the light with the integral motion detector, replace the 'PB' from the model number with 'M'. For example, WLBC85MQ. To order the light with the eye shield, add an 'E' after the length. For example, WLBC85EPBQ. Specifications Supply Voltage to V dc Use only with a suitable Class power supply (UL) or SELV power supply (CE) Supply Current Light Length (mm) Max Current Draw (A) Typical Current Draw (A) V dc V dc V dc Original Document 76 Rev. G 9 May 6 76

2 WLB Industrial LED Light Bar (DC) Supply Protection Circuitry Protected against reverse polarity and transient voltages Light Characteristics Color: Daylight white Color temperature (CCT): 5K (±K) Lumen output: 65 (±5%) per foot, typical at 5 C (77 F) Luminous efficacy: 87 lumens/watt typical at V dc at 5 C (77 F) CRI: 85, typical Eye shield reduces lumens by about 5% LED Lifetime Lumen Maintenance - L 7 When operating within specifications, output will decrease less than % after 5, hours. Push Button II = % light intensity I = 5% light intensity O = Off Models with Motion Detection Light turns off after approximately 6 seconds without detecting motion. Range: meters; ±5 field of view Standby current: 7 µa Construction Anodized aluminum housing; polycarbonate window and end caps; stainless steel mounting brackets Spacing Criterion Vertical:. Horizontal:. Mounting Snap clips; optional magnetic mount or swivel bracket accessories available Connections Integral -pin Euro-style QD (-pin connecting cordset required for QD models); or m (6.5 ft) integral cable Environmental Rating IEC IP5 Vibration and Mechanical Shock Vibration -55 Hz.m p-p amplitude per IEC Shock 5G ms duration, half sine wave per IEC Operating Temperature C to +7 C ( F to +58 F) Light output begins to decrease above 5 C ( F) and will be approximately 65% of max intensity at 6 C ( F) and % of max intensity at 7 C (58 F) Models with motion detection: C to +6 C ( F to + F) Storage Temperature C to +7 C ( F to +58 F) Test Data LM-79, LM-8, TM- Certifications E7667 UL Recognized for easy installation in control cabinets. Application Note When connecting cascadable lights in series it is important not to exceed the maximum current limitation of Amps Maximum length of light at V dc:. m (.6 ft) Maximum length of light at V dc:. (9.8 ft) Maximum length of light at V dc:. m (. ft) Spacing Criteria (SC) The spacing criteria is the fixture-spacing-to-mounting-height ratio and aids in laying out a pattern of fixtures. Multiply the spacing criteria by the mounting height to get the maximum fixture spacing that still provides even illumination (no shadowing between fixtures). Luminaire Spacing = SC Height to Illuminated Plane The mounting height is the distance from the fixture to the surface you are lighting. Light Characteristics. m. m.5 m.7 m.8 m. lux. m.7 m 7 lux.8 m. m 77 lux. m. m 8 lux.6 m.8 m lux..5 m 9 lux. m. m Vertical Spread:.5 Horizontal Spread: 8.8 Mount height of meter ( m) () Vertical Angle: Vertical 9 Horizontal lux 5 lux lux 75 lux 5 lux 5 lux lux 5 lux 5% max. Figure. 85 mm Models - Tel: P/N 76 Rev. G

3 WLB Industrial LED Light Bar (DC) m. m.5 m.7 m.8 m. 5 lux. m.7 m 55 lux.8 m. m 8 lux. m. m 68 lux.6 m.7 m 5 lux.. m 9 lux. m. m Vertical Spread:.5 Horizontal Spread: 8. Mount height of meter ( m) () Vertical Angle: Vertical 9 Horizontal lux 5 lux lux 5 lux lux 5 lux 5 lux lux 5% max. Figure. 57m Models m. m.5 m.7 m.8 m. 67 lux. m.7 m 7 lux.8 m. m 59 lux. m. m 959 lux.7 m.9 m 78 lux. m.6 m 56 lux.5 m. m Vertical Spread:.7 Horizontal Spread:. Mount height of meter ( m) () Vertical Angle: Vertical 9 Horizontal lux 75 lux 5 lux 5 lux 5 lux lux lux 75 lux 5% max. Figure. 85m Models m. m.5 m.7 m.8 m. 67 lux. m.7 m 6 lux.8 m. m 76 lux. m. m 8 lux.7 m.9 m 96 lux. m.6 m 756 lux.5 m. m Vertical Spread:. Horizontal Spread: 9.7 Mount height of meter ( m) () Vertical Angle: Vertical 9 Horizontal lux 5 lux lux lux lux lux 5 lux 5 lux 5% max. Figure. m Models P/N 76 Rev. G - Tel:

4 WLB Industrial LED Light Bar (DC) m. m.5 m.7 m.8 m. 77 lux. m. m 76 lux.8 m.8 m 77 lux. m. m 8 lux.6 m.7 m lux.. m 7 lux. m.5 m Vertical Spread: 98.7 Horizontal Spread:.8 Mount height of meter ( m) () Vertical Angle: Vertical 9 Horizontal lux 5 lux lux 75 lux 5 lux 5 lux lux 5 lux 5% max. Figure mm Models with Eye Shields m. m.5 m.7 m.8 m. 68 lux. m. m 88 lux.6 m.8 m 87 lux.9 m. m 769 lux. m.5 m 6 lux.5 m.9 m lux.8 m. m Vertical Spread: 8.5 Horizontal Spread: 97. Mount height of meter ( m) () Vertical Angle: Vertical 9 Horizontal lux 5 lux lux 5 lux lux 5 lux 5 lux lux 5% max. Figure 6. 57m Models with Eye Shields m. m.5 m.7 m.8 m. 8 lux. m.5 m 9 lux.6 m. 578 lux.9 m.6 m 95 lux. m. m 779 lux. m.6 m 5 lux.7 m. m Vertical Spread: 8. Horizontal Spread:. Mount height of meter ( m) () Vertical Angle: Vertical 9 Horizontal lux 75 lux lux 5 lux 5 lux 75 lux 5 lux lux 5% max. Figure 7. 85m Models with Eye Shields - Tel: P/N 76 Rev. G

5 WLB Industrial LED Light Bar (DC) m. m.5 m.7 m.8 m. 985 lux. m.6 m 95 lux.6 m. m 96 lux.9 m.9 m 9 lux. m.6 m 99 lux.5 m. m 7 lux.8 m.8 m Vertical Spread: 8.8 Horizontal Spread:.8 Mount height of meter ( m) () Vertical Angle: Vertical 9 Horizontal lux 5 lux lux lux lux lux 5 lux 5 lux 5% max. Figure 8. m Models with Eye Shields Wiring Wiring Pinouts (Female and Male) Wiring Key Switch Models + V dc Female = Brown = Blue Non-Switch and Motion Detector Models + V dc + Male = Brown, connect for % intensity = Blue = Black* * For models without motion detection, connect the black wire to to V dc for 5% maximum intensity. For models with motion detection, connect the black wire to to V dc to bypass the motion detector switch. P/N 76 Rev. G - Tel:

6 WLB Industrial LED Light Bar (DC) Dimensions L L Motion Detector and/or Eye Shield Models Specific to models with shield Models Models without Motion Detector Models with Motion Detector and/or Eye Shields L L L L WLBC85..Q 98 mm (.7 in) m (.6 in) 68 mm (.5 in) 9m (5. in) WLBC57..Q 58m (.8 in) 6m (.7 in) 65m (5.6 in) 67 mm (6.5 in) WLBC85..Q 86 mm (.9 in) 88 mm (.8 in) 9 mm (6.7 in) 95 mm (7.6 in) WLBC..Q mm (5. in) 66 mm (5.9 in) mm (7.8 in) 6 mm (8.7 in) WLBC mm (.7 in) mm (. in) 68 mm (.5 in) 8 mm (5. in) WLBC m (.8 in) 595 mm (. in) 65m (5.6 in) 665 mm (6. in) WLBC mm (.9 in) 877 mm (.5 in) 9 mm (6.7 in) 97 mm (7. in) WLBC.. mm (5. in) 59 mm (5.6 in) mm (7.8 in) 9 mm (8. in) Tel: P/N 76 Rev. G

7 WLB Industrial LED Light Bar (DC) Accessories -Pin Threaded M/Euro-Style Cordsets Model Length Style Dimensions Pinout (Female) MQDC-6 MQDC-5.8 m (6 ft).57 m (5 ft) Typ. MQDC- MQDC-5 MQDC-6RA MQDC-5RA 9. m ( ft) 5. m (5 ft).8 m (6 ft).57 m (5 ft) Straight Typ. [.6"] M x ø.5 MQDC-RA 9. m ( ft) Right-Angle Typ. [.8"] = Brown = White = Blue = Black MQDC-5RA 5. m (5 ft) M x ø.5 [.57"] -Pin Threaded M/Euro-Style Cordsets Double Ended Model Length Style Dimensions Pinout MQDEC-SS. m ( ft) MQDEC-SS MQDEC-6SS.9 m ( ft).8 m (6 ft) Typ. [.58"] MQDEC-SS MQDEC-SS MQDEC-SS.66 m ( ft) 6. ( ft) 9. m ( ft) Male Straight/ Female Straight M x ø.5 [.57"] Typ. [.7"] Female MQDEC-5SS 5. m (5 ft) M x ø.5 [.57"] Male MQDEC-RS MQDEC-6RS MQDEC-RS MQDEC-RS MQDEC-RS.9 m ( ft).8 m ( ft).66 m ( ft) 6. ( ft) 9. m ( ft) Male Right-Angle/ Female Straight M x ø.5 [.57"] Typ. [.6"] Typ. [.8"] = Brown = White = Blue = Black ø.5 [.57"] MQDEC-5RS 5. m (5 ft) Typ. [.7"] M x P/N 76 Rev. G - Tel:

8 WLB Industrial LED Light Bar (DC) -Pin Threaded M/Euro-Style Splitter Cordsets Flat Junction Model Branches (Female) Trunk (Male) Pinout CSB-MM No branch No trunk Female CSB-MM CSB-MM CSB-M8M CSB-M5M x. ( ft) No trunk. ( ft).5 (8 ft).57 m (5 ft) CSB-M5M 7.6 (5 ft) Male CSB-UNT5M 7.6 (5 ft) Unterminated Typ. [.58"] Ø.5 [.8"] 8. [.7"] Typ. [.7"] Ø.5 [.57"] Ø.5 [.57"] M x 5 [.8"]. [.69"] M x = Brown = White = Blue = Black Enclosure Accessories LMBEDS Switch Bracket with plunger switch to power lights when the enclosure is opened Refer to datasheet 667 for more information Mounting Brackets LMBWLB Replaces the bracket that ships with the WLB light Stainless steel Includes snap clips, screws, and insulator caps 6 X Ø6.5 LMBWLB-8S Swivel bracket kit allows 8 of movement Ø6. 6 LMBWLBMAG Magnetic mounting bracket for easy attachment to steel and iron surfaces 6 9 Ø6 LMBWLBU Die cast bracket for rugged applications Secured to light with included thumb screw Clearance hole for 6 mm (/ in) button head screw Tel: P/N 76 Rev. G

9 WLB Industrial LED Light Bar (DC) Mounting Brackets LMBWLBUT Die cast bracket for rugged applications Secured to light with included thumb screw Integral /- stud for mounting 8 7 Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Copyright Notice Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. For the most recent version of any documentation, refer to: Banner Engineering Corp. All rights reserved. - Tel: