Thyristor Surge Suppressors. PxxxxTX Series DO-214AC/SMA. Circuit Protection System ELECTRONICS
|
|
|
- Berenice Hardy
- 5 years ago
- Views:
Transcription
1 ELECTRONICS Thyristor Surge Suppressors PxxxxTX Series DO-214AC/SMA
2 Description Thyristor Surge Suppressors -PxxxxTX Series DO-214AC/SMA Series are low capacitance devices designed to protect broadband equipment such as VOIP, DSL modems and DSLAMs from damaging overvoltage transients. The series provides a surface mount solution that enables equipment to comply with global regulatory standards while limiting the impact to broadband signals. Features Compared to surge suppression using other technologies, P Series devices offer absolute surge protection regardless of the surge current available and the rate of applied voltage (dv/dt). P Series devices: Cannot be damaged by voltage Eliminate hysteresis and heat dissipation typically found with clamping devices Eliminate voltage overshoot caused by fast-rising transients Are non-degenerative Will not fatigue Have low capacitance, making them ideal for high-speed transmission equipment Dimensions (mm) (inches) Part Number Code P x x x x X X Type Breakdown Voltage Type S: SMB T:SMA E:TO-92 L:DO-15 Peak Pilse Current-Ipp 8/20μs A=150A B=250A C=400A Page:1
3 Electriacl Characteristics Type Number VDRM VS IH IS IT VT CJ V V MA MA A V PF P0080TA P0300TA P0640TA P0720TA P0900TA P1100TA P1300TA P1500TA P1800TA P2300TA P2600TA P3100TA P3500TA Notes: Is:Switching Current maximum current required to switch to on state IDRM:Leakage Current maximum peak off-state current measured at VDRM IH:Holding Current minimum current required to maintain on state IPP:Peak Pulse Current maximum rated peak impulse current IT:On-state Current maximum rated continuous on-state current VDRM:Peak Off-state Voltage maximum voltage that can be applied while maintaining off state VT:On-state Voltage maximum voltage measured at rated on-state current VS:Switching Voltage maximum voltage prior to switching to on state SERIES Peak Pilse Current-lpp(A) 2/10µs 8/20µs 10/160µs 10/560µs 10/1000µs A Thermal Considerations Package Symbol Parameter Value Unit TJ Operating Junction Temperature -40 to +150 TS Storage Temperature Range -40 to +150 DO-214AC RθJA Junction to Ambient on printed circuit 90 /W Page:2
4 Characteristics Curves V-I Characteristics t r x t d Pulse Waveform +I -V I T I S I H I DRM -I V T V DRM V S + V IPP Peak Pulse Current %I PP t r 0 Peak Value Waveform = t r x t d t d t r = rise time to peak v alue t d = decay time to half value Half Value t Time (µs) Normalized V S Change vs. Junction Temperature Normalized DC Holding Current vs. Case Temperature Percent of V S Change % C C Junction Temperature (T J ) C I H I H (T C = 25ºC) Ratio of Case Temperature (T ) - ºC Page:3
5 Recommended Soldering Conditions Page:4
6 Packaging DO-214AC Page:5
7 RuiLongYuan Electronics Co., Ltd. Reproducing and modifying information of the document is prohibited without permission from Ruilongyuan International Inc. Ruilongyuan International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. Ruilongyuan International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. Ruilongyuan International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications.ruilongyuan International Inc. makes no representation or warranty that such applications will be suitable for the specifed use without further testing or modifcation. The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment,aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fullyindemnify Ruilongyuan International Inc. for any damages resulting from such improper use or sale. Tel: Fax: Page:6
Transient Voltage Suppressors. PxxxxTX Series DO-214AC/SMA. Circuit Protection System ELECTRONICS
ELECTRONICS Transient Voltage Suppressors PxxxxTX Series DO-214AC/SMA Description Thyristor Surge Suppressors -PxxxxTX Series DO-214AC/SMA Series are low capacitance devices designed to protect broadband
Transient Voltage Suppressors. AK3 Series. Circuit Protection System ELECTRONICS
ELECTRONICS Transient Suppressors K3 Series Transient Suppressors - K3 Series Features Very low clamping voltage Ultra compact: less than one-tenth the size of traditional discrete solutions Sharp breakdown
TVS/ESD Arrays. RLSD32AxxxLC Series. Circuit Protection System ELECTRONICS
ELECTRONICS TVS/ESD Arrays RLSD32AxxxLC Series TVS/ESD Arrays - RLSD32AxxxLC Series Features 350 Watts Peak Pulse Power per Line (tp = 8/20μs) Bidirectional Configuration Protects One Power or I/O Port
DATA SHEET THYRISTOR SURGE SUPPRESSORS MODEMS/LINE CARD PXXXXLX series
Product specification December 18, 218 V. DATA SHEET MODEMS/INE CARD series RoHS compliant & Halogen free 2 Thyristor Surge Suppressors (TSS) Data Sheet Description DO-15/DO-21 Thyristor solid state protection
TVS/ESD Arrays. RLST23A712C Series. Circuit Protection System ELECTRONICS
ELECTRONICS TVS/ESD Arrays RLST23A712C Series TVS/ESD Arrays - RLST23A712C Series Features 400 Watts Peak Pulse Power per Line (tp = 8/20μs) Protects two +12V to -7V lines Low Leakage Current Low operating
TVS/ESD Arrays. RLSD52Axx1V Series. Circuit Protection System ELECTRONICS
ELECTRONICS TVS/ESD Arrays RLSD52Axx1V Series Features 100 Watts Peak Pulse Power per Line (tp = 8/20μs) Working voltages: 3.3V 5V 8V 12V 15V 24V 36V Low Leakage Current Low operating and clamping voltages
TVS/ESD Arrays. RLST23AxxxV Series. Circuit Protection System ELECTRONICS
ELECTRONICS TVS/ESD Arrays RLST23AxxxV Series TVS/ESD Arrays - RLST23AxxxV Series Features 350 Watts peak pulse power (tp = 8/20μs) Two devices protect two high-speed line pairs Low leakage current Low
TVS/ESD Arrays. RLST236A054LV Series. Circuit Protection System ELECTRONICS
ELECTRONICS TVS/ESD rrays RLST236054LV Series TVS/ESD rrays - RLST236054LV Series Features Solid-state silicon-avalanche technology 300 Watts Peak Pulse Power per Line (tp=8/20μs) Low operating and clamping
Bi-directional ESD Protection Diode
Bi-directional ESD Protection Diode FEATURES Meet IEC61-4-2 (ESD) ±15kV (air), ±8kV (contact) Meet IEC61-4-4 (EFT) rating. 4A (5/5ns) Protects one Bi-directional I/O line Moisture sensitivity level: level
2 Anode. Parameter Symbol Value Units. Max Reverse Leakage Current V IZT IZT IZK VR Nom. V Min. V Max.
SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 2.4~33 Volt POWER 25 mwatt FEATURES.42(.5).37(.95) Planar Die construction 25mW Power Dissipation Zener Voltages from 2.4~ Ideally Suited for Automated Assembly
P1SMA5914-AU ~ 1SMA5945-AU Series
SILICON ZENER DIODE oltage 3.6~68 Power 1.5 W Features Silicon planar Zener diode Low profile surface-mount package Low leakage current Excellent stability High temperature soldering: 260 o C/ seconds
Bi-directional ESD Protection Diode
// Bidirectional ESD Protection Diode FEATURES Meet IEC642 (ESD) ±k (air), ±8k (contact) Designed for mounting on small surface Protects one Bidirectional I/O line Moisture sensitivity level 1 Working
PMURA2J / MURB2J / MUR260K
SUPERFAST RECOVERY RECTIFIERS Voltage 600 V Current 2 A Features Superfast recovery times-epitaxial construction Low forward voltage, high current capability Hermetically sealed. Low leakage High surge
TESDC24V Taiwan Semiconductor
Bi-directional TVS Diode Array FEATURES - Meet IEC61-4-2 (ESD) ±15kV (air), ±8kV (contact) 6 - Meet IEC61-4-4 (EFT) rating. A (5/5ns) 3 - Protects one Bi-directional I/O line 5 - Working Voltage : 24V
1N4728A-G SERIES SILICON ZENER DIODE MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS FEATURES MECHANICAL DATA
SILICON ZENER DIODE VOLTAGE 3.3 to 75 Volt POWER 1 Watt FEATURES Low inductance High temperature soldering : 260 C /10 seconds at terminals Glass package has Underwriters Laboratory Flammability Classification
ST0561D4. 1-Line Bi-directional TVS Diode. Description. Mechanical Characteristics. Applications. Features. Ordering Information
-Line Bi-directional TVS Diode Description The ST56D4 is a bi-directional TVS diode, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making this
BZT52-C2V4S SERIES SURFACE MOUNT SILICON ZENER DIODES FEATURES MECHANICAL DATA
SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 2.4 to 75 Volt POWER 200 mwatt FEATURES Planar Die construction 200mW Power Dissipation Zener Voltages from 2.4~75V 0.078(1.95) 0.068(1.75) Ideally Suited for
BZT52-B2V4~BZT52-B75 SURFACE MOUNT SILICON ZENER DIODES FEATURES MECHANICAL DATA
SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 2.4 to 75 Volt POWER 4 mwatt FEATURES Planar Die construction 4mW Power Dissipation.154(3.9).141(3.6).1(2.8).98(2.5) Zener Voltages from 2.4~75V Ideally Suited
PESDNC553T5VU Normal Capacitance ESD Protector
Normal Capacitance ESD Protector Description The is a TVS array designed to protect I/O or data lines from the damaging effects of ESD. It is normal capacitance transient voltage suppressors for high speed
Applications. Keypads Side Keys,LCD Displays IEC (ESD) immunity test Air discharge: ±30kV Contact discharge: ±30kV
1-Line Low Capacitance Bi-directional TVS Diode Description The is a bi-directional TVS diode, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage,
BZT52-B2V4S SERIES SURFACE MOUNT SILICON ZENER DIODES FEATURES MECHANICAL DATA MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 2.4 to 75 Volt POWER 200 mwatt FEATURES Planar Die construction 200mW Power Dissipation Zener Voltages from 2.4~75V Ideally Suited for Automated Assembly Processes
PESDLC553T5VU Low Capacitance ESD Protector
Description The is a TVS array designed to protect I/O or data lines from the damaging effects of ESD. It is low capacitance transient voltage suppressors for high speed data interface that designed to
Surface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
MMSZ5221B-AU~MMSZ5262B-AU
SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 2.4 to 51 Volt POWER 500 mwatt FEATURES 0.154(3.90) 0.141(3.60) Planar Die construction 500mW Power Dissipation Ideally Suited for Automated Assembly Processes
PESDWC23T5VU ESD Protector
ESD Protector Description The is a Transient Voltage Suppressor Arrays that 3 designed to protect components which are connected to data and transmission lines against electrostatic discharge(esd), electrical
SOTxxC. Dual Transient Voltage Suppressors Array for ESD Protection WILLAS ELECTRONIC CORP
General Description The is a dual monolithic voltage suppressor designed to protect components which are connected to data and transmission lines against ESD. It clamps the voltage just above the logic
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors DO-214AA (SMB J-Bend) PRIMARY CHARACTERISTICS V BR (uni-directional) 6.4 V to 49.1 V V BR (bi-directional) 6.4 V to 49.1 V V WM
PESDUC2FD5VB ESD Protector
ESD Protector Description The protects sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. They feature large cross-sectional
PTVSLC3D24VB Low Capacitance TVS
Description The is a low capacitance transient voltage suppressor for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to ESD lightning, and other voltage
500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 5V V Z tolerance selection of ± 5% Moisture sensitivity level: level, per J-STD-020 Compliant to RoHS directive
Description Mechanical Characteristics Features Applications Ordering Information Part Number Packaging Reel Size
ST36D4 -Line Bi-directional TVS Diode Description The ST36D4 is a bi-directional TVS diode, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
BZW04-5V8 thru BZW TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
TRANSZORB Transient Voltage Suppressors DO-41 (DO-204AL) FEATURES Glass passivated chip junction Available in uni-directional and bi-directional 400 W peak pulse power capability with a 10/0 μs waveform,
PTVSLC3D5VB Low Capacitance TVS
Low Capacitance TVS Description The is a low capacitance transient voltage suppressor for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to ESD lightning,
PESDALC143T5VU Low Capacitance ESD Protector
Low Capacitance ESD Protector Description The is low capacitance transient voltage suppressor for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to
PESDLC363T5VU ESD Protector
ESD Protector Description The protects sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. They feature large cross-sectional
Features. Applications
Description are surge rated diode arrays designed to protect high speed data interfaces. The SR series has been specifically designed to protect sensitive components which are connected to data and transmission
500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 5% Surface mounting device (SMD) type Moisture sensitivity level: level, per J-STD-020
Glass Gas Discharge. RL501 Series. Circuit Protection System ELECTRONICS
ELECTRONICS Glass Gas Discharge RL501 Series Features Compared with other surge absorbers having similar functions has the fast response speed,largest withstand current and voltage but smallest size. All
SMAJ SERIES. Surface Mount Transient Voltage Suppressor Diodes
Surface Mount Transient Voltage Suppressor Diodes Features Low profile package Ideal for automated placement Glass passivated chip junction High forward surge capability Available in uni-directional 400
SM320A~SM3200A SCHOTTKY DIODE REVERSE VOLTAGE 20 TO 200V FORWARD CURRENT 3.0A
320A~3200A DESCRIPTION The 320A~3200A are available in A Package. ORDERING INFORMATION Package Type Part Number 320A 340A 360A 380A A 3100A 3120A 3150A 3200A Note 5,000pcs/Reel AiT provides all RoHS Compliant
5-Line ESD Protection Diode Array in LLP75-6L
-Line ESD Protection Diode Array in LLP7-6L 6 996 MARKING (example only) 997 XX YY Dot = pin marking XX = date code YY = type code (see table below) DESIGN SUPPORT TOOLS Models Available click logo to
500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide Zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 5% Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC
PESDNC523T5VU Low Capacitance ESD Protector
Description The is a TVS array designed to protect I/O or data lines from the damaging effects of ESD. it is low capacitance transient voltage suppressors for high speed data interface that designed to
PESDALC10N3V3U Low Capacitance TVS Array
Description The is low capacitance transient voltage suppressor array for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to ESD lightning, and other
USB-OTG BUS-Port ESD Protection for V BUS = 12 V
USB-OTG BUS-Port ESD Protection for V BUS = 12 V 6 5 4 1 2 3 MARKING (example only) 2517 Dot = pin 1 marking XX = date code YY = type code (see table below) 7 2112 XX YY DESIGN SUPPORT TOOLS click logo
PESDALC10FN5VU Low Capacitance TVS Array
PESDALC1FN5VU Low Capacitance TVS Array Description The PESDALC1FN5VU is low capacitance transient voltage suppressor array for high speed data interface that designed to protect sensitive electronics
500mW, 2% Tolerance Zener Diodes
500mW, 2% Tolerance Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 2% Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC Halogen-free
PESDLC723T5VU Low Capacitance ESD Protector
Description The is a TVS array designed to protect I/O or data lines from the damaging effects of ESD. it is low capacitance transient voltage suppressors for high speed data interface that designed to
JIEJIE MICROELECTRONICS CO., Ltd
JIEJIE MICROELECTRONICS CO., Ltd AK Series 6A Transient Voltage Suppressor Rev.2 DESCRIPTION: The AK6 series of high current bi-directional transient suppressors are designed for A.C. line protection and
500mW, 2% Tolerance SMD Zener Diode
500mW, 2% Tolerance SMD Zener Diode FEATURES - Wide zener voltage range selection : 2.4V to 75V - Surface mount device type - Moisture sensitivity level - Pb free and RoHS compliant - V Z Tolerance Selection
4-Line BUS-Port ESD Protection
4-Line BUS-Port ESD Protection 2397 6 5 4 1 2 3 MARKING (example only) Dot = pin 1 marking XX = date code YY = type code (see table below) 2453 1 XX YY DESIGN SUPPORT TOOLS click logo to get started Models
NZQA5V6AXV5 Series. Transient Voltage Suppressors
Transient Suppressors ESD Protection Diode with Low Clamping This integrated transient voltage suppressor device (TVS) is designed for applications requiring transient overvoltage protection. It is intended
Electrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s SET23AXXL02 series of transient voltage suppressor (TVS) are designed to protect components which are connected to
1.5KE SERIES. Transient Voltage Suppressor Diodes
RoHS COMPLIANT Transient Voltage Suppressor Diodes Features Excellent clamping capability Low dynamic impedance Solder dip 275 C max. 7 s, per JESD 22-B106 Mechanical Data Package: DO-201AE Molding compound
500mW 5% Zener Diodes
MMSZ522B - MMSZ5262B 500mW 5% Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 5V VZ Tolerance Selection of ± 5% Surface device type mountin Compliant to RoHS directive 20/65/EU and in
4-Line BUS-Port ESD Protection
4-Line BUS-Port ESD Protection 2397 6 5 4 1 2 3 MARKING (example only) XX YY Dot = pin 1 marking XX = date code YY = type code (see table below) 2453 1 DESIGN SUPPORT TOOLS click logo to get started Models
WPE0541P1 1-Line Bi-directional Low Capacitance TVS Diode
Description Mechanical Characteristics The is designed to protect voltage sensitive components from ESD and transient voltage events. Excellent clamping capability, low leakage, and fast response time,
Description. Features. Continuous RA8 Series RA16 Series RA22 Series Units. ) 4 to to to 275 V DC Voltage Range (V M(DC)
RA Varistor Series RoHS Description The RA Series transient surge suppressors are varistors (MOVs) supplied in a low-profile box that features a precise seating plane to increase mechanical stability for
BZD17C SERIES Taiwan Semiconductor
0.8W, 11V - 220V Voltage Regulator Diodes FEATURES - Silicon zener diodes - Low profile surface-mount package - Zener and surge current specification - Low leakage current - Excellent stability - Compliant
Surface Mount Silicon Zener Diodes
FEATURES CREAT BY ART - Low profile package - Ideal for automated placement - Glass passivated junction - Built-in strain relief - Low inductance - Typical IR less than 0.5μA above 11V - ESD Rating of
GSOT04C~ GSOT15C ESD PROTECTION DUAL TRANSIENT VOLTAGE SUPPRESSORS ARRAY FOR ESD PROTECTION
ESD DESCRIPTION The GSOT04C~GSOT15C are dual monolithic voltage suppressor designed to protect components which are connected to data and transmission lines against ESD. It clamps the voltage just above
Ultra Low Capacitance Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in LLP1006-2M
Ultra Low Capacitance Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in LLP6-2M 1 2 21129 MARKING (example only) XY Bar = pin 1 marking X = date code Y = type code (see table below)
Surface Mount Zener Diode
Surface Mount Zener Diode FEATURES - Zener voltages from : 2.4V - 39V - Planar die construction - Ideally suited for automated assembly processes - Moisture sensitivity : Level 1 per J-STD-2 MECHANICAL
Low Capacitance, Single-Line ESD Protection Diode
VBUS51BD-HD1 Low Capacitance, Single-Line ESD Protection Diode 1 MARKING (example only) 856 XY Bar = cathode marking Y = type code (see table below) X = date code 111 855 DESIGN SUPPORT TOOLS click logo
PTVSHC2EN10VU Transient Voltage Suppressor
Transient Voltage Suppressor Description The ESD protector is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA s. They feature large
2M6.8Z - 2M200Z Taiwan Semiconductor
2W, 6.8V - 200V Glass Passivated Junction Silicon Zener Diodes FEATURES - Glass passivated chip junction - Typical I R less than μa - Compliant to RoHS Directive 20/65/EU and in accordance to WEEE 2002/96/EC
TSZL52C2V4 thru TSZL52C39 Taiwan Semiconductor. SMD Zener Diode. Small Signal Product FEATURES MECHANICAL DATA
SMD Zener Diode FEATURES - Wide zener voltage range selection : 2.4V to 39V - Designed for mounting on small surface - Extremely thin / leadless package - Packing code with suffix "G" means green compound
PESDSC9D5VU ESD Protector
ESD Protector Description The ESD protector is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA s. They feature large cross-sectional
PTVSHC3N7VUL1 Transient Voltage Suppressor
Transient Voltage Suppressor Description The ESD protector is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA s. They feature large
ESD5Z5.0 TRANSIENT VOLTAGE SUPPRESSORS FOR ESD PROTECTION
DESCRIPTION The Series is designed to protect voltage sensitive components from ESD and transient voltage events. Excellent clamping capability, low leakage, and fast response time, make these parts ideal
SMP75. Trisil for telecom equipment protection. Features. Description. Applications. Benefits
Trisil for telecom equipment protection Features bidirectional crowbar protection voltage: 8 V low leakage current: I R = 2 µa max holding current: I H = 15 ma min repetitive peak pulse current: I PP =
Transient Voltage Suppression Diodes Axial Leaded 1500W TVS Diode1.5KE Series
The 1.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Dimension Dim Millimeters Inches Min
Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in LLP1006-2M
Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in LLP-M 1 119 MARKING (example only) XY Bar = pin 1 marking X = date code Y = type code (see table below) DESIGN SUPPORT TOOLS Models
TOSHIBA Schottky Barrier Diode CMS16
CMS6 TOSHIBA Schottky Barrier Diode CMS6 Switching Mode Power Supply Applications Portable Equipment Battery Applications - Converter Applications Unit: mm Repetitive peak reverse voltage : VRRM = 4 V
L05ESDL5V0D3-2 SOT-323. STAND-OFF VOLTAGE Volts POWER DISSIPATION - 50 WATTS ESD PROTECTION DEVICE
LITE-ON SEMICONDUCTOR ESD PROTECTION DEVICE STAND-OFF VOLTAGE - 5.0 Volts POWER DISSIPATION - 50 WATTS GENERAL DESCRIPTION The is low capacitance TVS arrays designed to protect high speed data interfaces.
SRV25-4LC ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION DFN-10 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART
ESD9X5VL ESD9X5VL. X x. Transient Voltage Suppressor
Ultra Small Profile, low capacitance Transient Voltage Suppressor Descriptions The is an ESD transient voltage suppression component which provides a very high level of protection for sensitive electronic
Features. Case Material: Molded Plastic, Green Molding Compound. Computers and Peripheral
LOW CAPACITANCE BIDIRECTIONAL TVS DIODE Product Summary V BR (Min) I PP (Max) C T (Typ) 15V 9A 2pF Description This new generation TVS is designed to protect sensitive electronics from the damage due to
TOSHIBA Schottky Barrier Rectifier Schottky Barrier Type CMS05
CMS5 TOSHIBA Schottky Barrier Rectifier Schottky Barrier Type CMS5 Switching Mode Power Supply Applications Portable Equipment Battery Applications Unit: mm Repetitive peak reverse voltage : V RRM = 3
Maximun Ratings and Electrical Characteristics at 25 C
SOD123W Voltage Power Dissipation 9.1 to 220 V 1 W FEATURE Low profile package Ideal for automated placement Low leakage current High surge current and zener capability Low differential resistance Low
SMDA05C-7 THRU SMDA24C-7
Description The SMDAxxC-7 series of transient voltage suppressors are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge
Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in LLP1006-2L
VCUT7B1-HD1 Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in LLP16-2L 1 2 21129 MARKING (example only) XY Bar = pin 1 marking X = date code Y = type code (see table below) 21121 2855
RClamp TM 0504M RailClamp Low Capacitance TVS Diode Array PRELIMINARY Features
Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The RClamp series has been specifically designed to protect sensitive components which are connected
2-Line BUS-Port ESD Protection - Flow Through Design FEATURES VBUS052CD-FAH VBUS052CD-FAH-GS MOLDING COMPOUND FLAMMABILITY RATING
VBUS52CD-FAH 2-Line BUS-Port ESD Protection - Flow Through Design 21325 NC NC 6 5 4 MARKING (example only) 21323 Dot = pin 1 marking Y = type code (see table below) XX = date code 1 2 3 YXX 219 DESIGN
RSB6.8S LOW CAPACITANCE TVS ARRAY DESCRIPTION SC-79 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
LOW CAPACITANCE TVS ARRAY DESCRIPTION The is a low capacitance, transient voltage suppressor designed to protect applications such as wireless telecommunication devices, PCMCIA cards and portable electronics.
PLR ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SC-89 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance (0.7pF Max. I/O to I/O) steering diode and TVS array combo. This device provides circuit protection for interfaces
SDC36C. TVS Diode Array for Proximity Switch Input Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Description The is a highsurge transient voltage suppressor (TS) optimized for protection of sensitive digital sensors used in proximity switches and industrial control applications. The protects the components
SRV05-4A. Green Products. Description. Features. China - Germany - Korea - Singapore - United States - smc-diodes.
Description The SRV05-4A is a low capacitance TVS (Transient Voltage Suppressor) array designed to protect sensitive semiconductor components from electrical overstress when interfaced to high-speed data
JIEJIE MICROELECTRONICS CO., Ltd
JIEJIE MICROELECTRONICS CO., Ltd 20KP Series 20KW Transient Voltage Suppressor Rev.2.3 DESCRIPTION: The 20KP series of high current uni/bi-directional transient suppressors are designed for A.C. line protection
DSL03-24T ULTRA LOW CAPACITANCE STEERING DIODE/THYRISTOR ARRAY DESCRIPTION SOT-23-6 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE STEERING DIODE/THYRISTOR ARRAY DESCRIPTION The provides ESD, EFT and surge protection for high-speed data interfaces. The 24V thyristor array, steering diode combination device meets
BAT42W/BAT43W SURFACE MOUNT SCHOTTKY BARRIER DIODE
Features: Low Turn-on Voltage Fast Switching PN Junction Guard Ring Transient and ESD Protection Designed for Surface Mount Application Plastic Material UL Recognition Flammability Classification 94V-O
ULL0402FC05C. Description. Mechanical characteristics PIN CONFIGURATION. SMART Phones Portable Electronics SMART Cards
LOW CAPACITANCE unbumped flip chip tvs array Description The ULLC0402FC05C Flip Chip employs advanced silicon P/N junction technology for unmatched board-level transient voltage protection against Electrostatic
ESD Protection Diode in LLP1006-2L
VESD3A1C-HD1 ESD Protection Diode in LLP16-2L 2 1 2856 MARKING (example only) XY Bar = cathode marking X = date code Y = type code (see table below) DESIGN SUPPORT TOOLS Models Available 21121 click logo
DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UDD32CXXL01 series
Product specification November 05, 2018 V.0 DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 Electrostatic Discharged Protection Devices
Features. Product Compliance Marking Reel Size (inches) Tape Width (mm) Quantity per Reel D5V0P4UR6SO-7 Standard DE ,000/Tape & Reel
YM ADVANCE INFORMATION CHANNEL LOW CAPACITANCE TVS DIODE ARRAY Product Summary V BR (Min) I PP (Max) C T (Typ).5V 5A.1pF Description The is a high-performance device suitable for protecting four high-speed
4-Line BUS-Port ESD Protection
4-Line BUS-Port ESD Protection 5 4 6 2 3 2897 MARKING (example only) 2896 XY Dot = pin marking X = date code Y = type code (see table below) 2932 FEATURES Ultra compact LLP-6M package Low package height
SMDD3K Series HIGH POWERED DSIP TVS ARRAY DESCRIPTION DSIP PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATIONS
HIGH POWERED DSIP TVS ARRAY DESCRIPTION The are high powered TVS arrays available in a 16 pin Dual SIP package. These devices are designed to protect telecommunications equipment from the damaging effects
ESD4-DFN LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION
LOW CAPACITANCE TVS ARRAY Description The is a multi-line, low capacitance, 7pF @ 2.5V bias transient voltage suppressor array. This device is designed to protect applications such as wireless telecommunication
UMD05B-323 UNITED MICRO DEVICE INC. Small Surface Mount Device TVS. Description. SOD-323 Pin Configuration. Mechanical Characteristics.
SOD-323 Single Line Diode for ESD Protection Description diodes are designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA s. They offer
Bidirectional Symmetrical (BiSy) Low Capacitance, Single-Line ESD Protection Diode in LLP1006-2M
VBUS5L1-DD1 Bidirectional Symmetrical (BiSy) Low Capacitance, Single-Line ESD Protection Diode in LLP16-2M 1 2 21129 MARKING (example only) XY Bar = pin 1 marking X = date code Y = type code (see table