DATA SHEET THYRISTOR SURGE SUPPRESSORS MODEMS/LINE CARD PXXXXLX series
|
|
|
- Hilary Davidson
- 5 years ago
- Views:
Transcription
1 Product specification December 18, 218 V. DATA SHEET MODEMS/INE CARD series RoHS compliant & Halogen free
2 2 Thyristor Surge Suppressors (TSS) Data Sheet Description DO-15/DO-21 Thyristor solid state protection thyristor protect telecommunications equipment such as modems, line cards, fax machines, and other CPE. P Series devices are used to enable equipment to meet various regulatory requirements including GR 189, ITU K.2, K.21 and K.45, IEC 695, U 695, and TIA-968 (formerly known as FCC Part 68). Features Compared to surge suppression using other technologies, P Series devices offer absolute surge protection regardless of the surge current available and the rate of applied voltage (dv/dt). P Series devices: Cannot be damaged by voltage Eliminate hysteresis and heat dissipation typically found with clamping devices Eliminate voltage overshoot caused by fast-rising transients Are non-degenerative Will not fatigue Have low capacitance, making them ideal for high-speed transmission equipment Meets MS level 1, per J-STD-2 Safety certification: U: E Electrical Parameters Parameter Definition Peak Off-state Voltage maximum voltage that can be applied while maintaining off state Switching Voltage maximum voltage prior to switching to on state On-state Voltage maximum voltage measured at rated on-state current I H C O SM di/dt eakage Current maximum peak off-state current measured at Switching Current maximum current required to switch to on state On-state Current maximum rated continuous on-state current Holding Current minimum current required to maintain on state Off-state Capacitance typical capacitance measured in off state Peak Pulse Current maximum rated peak impulse current Peak One-cycle Surge Current maximum rated one-cycle AC current Rate of Rise of Current maximum rated value of the acceptable rate of rise in current over time
3 3 Electrical Characteristics Part Number (μa) I H C O (pf) Marking P8A P8A P8B P8B P8C P8C P3A P3A P3B P3B P3C P3C P64A P6A P64B P6B P64C P6C P2A PA P2B PB P2C PC P9A P9A P9B P9B P9C P9C P11A P11A P11B P11B P11C P11C P13A P13A P13B P13B P13C P13C P15A P15A P15B P15B P15C P15C P18A P18A P18B P18B P18C P18C P23A P23A P23B P23B P23C P23C
4 4 Electrical Characteristics Part Number (μa) I H C O (pf) Marking P26A P26A P26B P26B P26C P26C P31A P31A P31B P31B P31C P31C P35A P35A P35B P35B P35C P35C Notes: All measurements are made at an ambient temperature of 25. applies to -4 through +85 temperature range. Off-state capacitance(c O) is measured at 1 MHz with a 2V bias and is typical value. For individual A, B and C surge ratings, see table below. Surge Ratings Series 2 1μs 8 2μs 1 16μs 1 56μs 1 1μs SM 6Hz di/dt (A/μs) A B C Thermal Considerations Value Symbol Parameter DO-15 (A/B Series) DO-21 (C Series) Unit T J Operating Junction Temperature -4 to to +15 T S Storage Temperature Range -4 to to +15 R θja Junction to Ambient on printed circuit 9 /W
5 5 Part Number Code and Marking P X X X X X Voltage Package ogo YXXX P8A Date Code Marking Code Series Code Surge Current Characteristics Curves Figure 1. V-I Characteristics Figure 2. tr td Pulse Wave-form +I t r = rise time to peak value t d = decay time to half value -V IH +V IPP - Peak Pulse Current, %IPP 1 Peak Value 5 Waveform = t r t d Half Value -I t r t d t-time (µs) Figure 3. Normalized Vs Change versus Junction Temperature Figure 4. Normalized DC Holding Current versus Case Temperature Percent of VS, Change - % Ratio of IH/IH(TC=25 ) T J -Junction Temperature ( ) T C -Case Temperature ( )
6 6 Recommended Soldering Conditions Wave Soldering 3 25 Soldering Preheating Maximum Wave 265 Cooling Temperature ( ) Time (minutes) Item Conditions Peak Temperature 265 Dipping Time Soldering 1 seconds 1 time Dimensions (DO-15/DO-21) DO-15 (A & B Series) D d Millimeters Inches Symbol Min. Max. Min. Max T T ΦD Φd DO-21 (C Series) D d T ΦD T Φd
7 Packaging Tape Z ±5 Symbol Dimension (mm) DO-15 DO-21 E A A 5.±.5 1.±.5 1 B 53.±1. 53.±1. B Z 1.2Max. 1.2Max. 2 T 6.±.4 6.±.4 E T E.8Max..8Max Max. 1.Max. Reel D 33.±3. 33.±3. D D1 D 16.4± ±2. D1 86.±2. 86.±2. D W1 W1 6.±3. 6.±3. Quantity 4PCS 12PCS
Thyristor Surge Suppressors. PxxxxTX Series DO-214AC/SMA. Circuit Protection System ELECTRONICS
ELECTRONICS Thyristor Surge Suppressors PxxxxTX Series DO-214AC/SMA Description Thyristor Surge Suppressors -PxxxxTX Series DO-214AC/SMA Series are low capacitance devices designed to protect broadband
Transient Voltage Suppressors. PxxxxTX Series DO-214AC/SMA. Circuit Protection System ELECTRONICS
ELECTRONICS Transient Voltage Suppressors PxxxxTX Series DO-214AC/SMA Description Thyristor Surge Suppressors -PxxxxTX Series DO-214AC/SMA Series are low capacitance devices designed to protect broadband
Electrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s SET23AXXL02 series of transient voltage suppressor (TVS) are designed to protect components which are connected to
DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UDD32CXXL01 series
Product specification November 05, 2018 V.0 DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 Electrostatic Discharged Protection Devices
Electrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description The series of is designed to protect power port and the chip Vbus interfaces. It has been specifically designed to protect sensitive
Electrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s SDT23CXXL02 series are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage
Electrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s component is surge rated diode array designed to protect high speed data line interfaces. It has been specifically
DATA SHEET METAL OXIDE VARISTORS POWER SUPPLY 05H series
Product specification February, 209 V.0 DATA SHEET POWER SUPPLY series RoHS compliant & Halogen free 2 kb Metal Oxide Varistor (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to
Metal Oxide Varistor (MOV) Data Sheet
Metal Oxide Varistor (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 800V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping ratio
Metal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Metal Oxide Varistor (MOV) Data Sheet
Metal Oxide Varistor (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 800V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping ratio
Metal Oxide Varistor (MOV) Data Sheet
Metal Oxide Varistor (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 800V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping ratio
Metal Oxide Varistor (MOV) Data Sheet
Metal Oxide Varistor (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 750V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping ratio
ML Varistor Series. Surface Mount Varistors
The ML Series family of Transient Voltage Surge Suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are designed to suppress a variety of transient events,
ML Varistor Series. Surface Mount Varistors
Pb The ML Series family of Transient Voltage Surge Suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are designed to suppress a variety of transient events,
JIEJIE MICROELECTRONICS CO., Ltd
JIEJIE MICROELECTRONICS CO., Ltd AK Series 6A Transient Voltage Suppressor Rev.2 DESCRIPTION: The AK6 series of high current bi-directional transient suppressors are designed for A.C. line protection and
AOZ8312. Low Capacitance 2.5 V TVS Diode. Features. General Description. Applications
Low Capacitance 2.5 V TVS Diode General Description The is a transient voltage suppressor array designed to protect high speed data lines from ESD and lightning. This incorporates twelve low capacitance
Electrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description is surge rated diode arrays designed to protect high speed data interfaces. It has been specifically designed to protect sensitive
Metal-Oxide Varistors (MOVs) Surface Mount Varistors > CH Series
CH Varistor Series RoHS Description CH Series transient surge suppressors are small, metal-oxide varistors (MOVs) manufactured in leadless chip form. They are intended for use in a variety of applications
14H SERIES. Metal Oxide Varistor (MOV) Data Sheet. Features. Applications. Part Number Code
Metal Oxide Varistor (MOV) Data Sheet Features Wide operating voltage (V 1mA ) range from 18V to 1800V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Metal Oxide Varistor (MOV) Data Sheet
Metal Oxide Varistor (MOV) Data Sheet Features Wide operating voltage (V 1mA ) range from 18V to 1800V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
500 W, Bidirectional Low Capacitance TVS Array
Available 500 W, Bidirectional Low Capacitance TVS Array DESCRIPTION This Transient Voltage Suppressor (TVS) is assembled in a QFN-143 package which has the same pinout and footprint as the SOT-143 package.
Metal Oxide Varistors (MOV) Data Sheet
Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V 1mA ) range from 18V to 820V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
ML Varistor Series. Surface Mount Varistors. Features. Size Metric EIA
The ML Series family of Transient Voltage Surge Suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are designed to suppress a variety of transient events,
Metal Oxide Varistor (MOV) Data Sheet
Metal Oxide Varistor (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 800V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping ratio
Transient Voltage Suppressors. AK3 Series. Circuit Protection System ELECTRONICS
ELECTRONICS Transient Suppressors K3 Series Transient Suppressors - K3 Series Features Very low clamping voltage Ultra compact: less than one-tenth the size of traditional discrete solutions Sharp breakdown
Surface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
Metal Oxide Varistor (MOV) Data Sheet
Metal Oxide Varistor (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 800V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping ratio
SMDA05C-7 THRU SMDA24C-7
Description The SMDAxxC-7 series of transient voltage suppressors are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge
Used to help achieve electromagnetic compliance of end products Replace larger surface mount TVS Zeners in many applications.
RoHS Description The ML Series family of transient voltage surge suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are designed to suppress a variety of
Data Book. TECCOR ELECTRONICS 1800 Hurd Drive Irving, Texas United States of America
Data Book by TECCOR ELECTRONICS 1800 Hurd Drive Irving, Texas 75038 United States of America Phone: Fax: (972) 550-1309 Web site: http://www.teccor.com E-mail: sidactor@teccor.com An Invensys company Teccor
RClamp0521PA. Ultra-Low Capacitance 1-Line ESD protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RailClamp TS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
RClamp0504FA RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamp low capacitance TVS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
SDC36C. TVS Diode Array for Proximity Switch Input Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Description The is a highsurge transient voltage suppressor (TS) optimized for protection of sensitive digital sensors used in proximity switches and industrial control applications. The protects the components
RClamp0504PA RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamp TVS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic
SM05G. Low Capacitance Quad Line ESD Protection Diode Arry SM05/G SOT23-3. General Description. Rev.02 Nov.
Low Capacitance Quad Line ESD Protection Diode Arry SOT23-3 General Description The of transient voltage suppressors (TVS) are designed to protect components which are connected to data and transmission
Bi-directional ESD Protection Diode
Bi-directional ESD Protection Diode FEATURES Meet IEC61-4-2 (ESD) ±15kV (air), ±8kV (contact) Meet IEC61-4-4 (EFT) rating. 4A (5/5ns) Protects one Bi-directional I/O line Moisture sensitivity level: level
SDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The transient voltage suppressor (TVS) is designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical
TESDC24V Taiwan Semiconductor
Bi-directional TVS Diode Array FEATURES - Meet IEC61-4-2 (ESD) ±15kV (air), ±8kV (contact) 6 - Meet IEC61-4-4 (EFT) rating. A (5/5ns) 3 - Protects one Bi-directional I/O line 5 - Working Voltage : 24V
AOZ8900. Ultra-Low Capacitance TVS Diode Array PRELIMINARY. Features. General Description. Applications. Typical Application
Ultra-Low Capacitance TS Diode Array General Description The is a transient voltage suppressor array designed to protect high speed data lines from Electro Static Discharge (ESD) and lightning. This device
AOZ8101. Ultra-Low Capacitance TVS Diode Array. General Description. Features. Applications. Typical Application
Ultra-Low Capacitance TS Diode Array General Description The AOZ8101 is a transient voltage suppressor array designed to protect high speed data lines from Electro Static Discharge (ESD) and lightning.
LCDA15C-6. Low Capacitance TVS Diode Array For Multi-mode Tranciever Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The LCDA15C6 has been specifically designed to protect sensitive components which are connected to data and transmission lines from over voltages caused by electrostatic discharge (ESD), electrical
Description. Features. Continuous RA8 Series RA16 Series RA22 Series Units. ) 4 to to to 275 V DC Voltage Range (V M(DC)
RA Varistor Series RoHS Description The RA Series transient surge suppressors are varistors (MOVs) supplied in a low-profile box that features a precise seating plane to increase mechanical stability for
BZW04-5V8 thru BZW TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
TRANSZORB Transient Voltage Suppressors DO-41 (DO-204AL) FEATURES Glass passivated chip junction Available in uni-directional and bi-directional 400 W peak pulse power capability with a 10/0 μs waveform,
SOTxxC. Dual Transient Voltage Suppressors Array for ESD Protection WILLAS ELECTRONIC CORP
General Description The is a dual monolithic voltage suppressor designed to protect components which are connected to data and transmission lines against ESD. It clamps the voltage just above the logic
RClamp0504F RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
SRV05-4A. Green Products. Description. Features. China - Germany - Korea - Singapore - United States - smc-diodes.
Description The SRV05-4A is a low capacitance TVS (Transient Voltage Suppressor) array designed to protect sensitive semiconductor components from electrical overstress when interfaced to high-speed data
SP1050 Series for Power-over-Ethernet PSE Protection
SP1050 Series for Power-over-Ethernet PSE Protection RoHS Pb GREEN Description The SP1050-04BTG provides over-voltage protection for Power-over-Ethernet PSE equipment in a space saving SOIC-8 package.
AOZ8102. Ultra-Low Capacitance TVS Diode Array. Features. General Description. Applications. Typical Application
Ultra-Low Capacitance TS Diode Array General Description The is a transient voltage suppressor array designed to protect high speed data lines from SD and lightning. This device incorporates eight surge
2 R x x x x A - 5. Description. Electrical symbol. Part Number Code
Description GDT is placed in front of, and in parallel with, sensitive telecom equipment such as power lines, communication lines, signal lines and data transmission lines to help protect them from damage
Metal Oxide Varistor:TVB Series
Features. RoHS compliant 2. Available for SMT flow/reflow soldering 3. Low profile and space saving 4. Large capability to withstand high surge current 5. Low inductance construction with excellent response
AQ1003 Series - 30pF 30kV Unidirectional Discrete TVS
General Purpose ESD Protection - SP003 AQ003 Series AQ003 Series - 30pF 30kV Unidirectional Discrete TVS RoHS Pb GREEN Description This diode is fabricated in a proprietary silicon avalanche technology
Bi-directional ESD Protection Diode
// Bidirectional ESD Protection Diode FEATURES Meet IEC642 (ESD) ±k (air), ±8k (contact) Designed for mounting on small surface Protects one Bidirectional I/O line Moisture sensitivity level 1 Working
AOZ8234. Four-line TVS Diode
AOZ8 Four-line TS Diode General Description The AOZ8 is a transient voltage suppressor diode array designed to protect data lines from high transient conditions and ESD. This state-of-the-art device utilizes
PESDR0554S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Ordering Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS array, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
SRV05-4L. Ultra Low Capacitance Array for ESD Protection. Features. Description. Main applications. Protection solution to meet. Ordering Information
Ultra Low Capacitance Array for ESD Protection Description The provides a typical line to line capacitance of 0.80pF and low insertion loss up to 3GHz providing greater signal integrity making it ideally
WE05R. Features. Transient Voltage Suppressor IEC COMPATIBILITY (EN ) SOT-143 (Top View) Document: W , Rev: A
Document: W0005, Rev: A Transient Voltage Suppressor Features 00Watts Peak Power per Line (tp = 8/0μs) Protects two I/O lines Low operating voltage: 5V Ultra Low capacitance(
RClamp0501T. Low Capacitance 1-Line ESD protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics.
- RailClamp Description RailClamp TS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
CitrusCom CS Applications. Features. Mechanical Characteristics. Description. Circuit Diagram. Pin Configuration
Features Transient protection for high-speed data lines IEC 61000-4-2 (ESD) ±30kV (Air) ±30kV (Contact) IEC 61000-4-4 (EFT) 40A (5/50 ns) IEC 61000-4-5 (Surge) 10A (8/20μs) Package optimized for high-speed
4-Line BUS-Port ESD-Protection - Flow Through Design VBUS054CD-FHI VBUS054CD-FHI-GS
4-Line BUS-Port ESD-Protection - Flow Through Design Features Compact LLP2513-11L package Low package height
AQxxC-01FTG Series 450W Bidirectional TVS Diode
General Purpose ESD Protection - AQxxC-1FTG Series AQxxC-1FTG Series 5W Bidirectional TVS Diode RoHS Pb GREEN Description The bidirectional AQxxC-1FTG Series is designed to replace multilayer varistors
SiBar Thyristor Surge Protectors
SiBar Thyristor Surge Protectors SiBar Thyristor Raychem Circuit Protection s SiBar thyristor surge protectors are designed to help protect sensitive telecommunication equipment from the hazards caused
MLVS 0402 Series Engineering Specification
MLVS 0402 Series 1. Scope This specification is applicable to Chip Metal Oxide Varistor in multilayer technology.the customer designed part number drawing take precedence over this specification. For RoHS
INPAQ Global RF/Component Solutions
TVL 0402 01 AB1 Specification Product Name Series Part No Transient Voltage Suppressor TVS Series TVL 0402 01 AB1 Size EIA 0402 TVL 0402 01 AB1 Engineering Specification 1. Scope TVL 0402 01 AB1 is a TVS
RClamp TM 0504M RailClamp Low Capacitance TVS Diode Array PRELIMINARY Features
Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The RClamp series has been specifically designed to protect sensitive components which are connected
INPAQ Global RF/Component Solutions
TVL 0402 01 SP0 Specification Product Name Series Part No Transient Voltage Suppressor TVS Series TVL 0402 01 SP0 Size EIA 0402 TVL 0402 01 SP0 Engineering Specification 1. Scope TVL 0402 01 SP0 is a TVS
PESDWC23T5VU ESD Protector
ESD Protector Description The is a Transient Voltage Suppressor Arrays that 3 designed to protect components which are connected to data and transmission lines against electrostatic discharge(esd), electrical
0534S PESDR0534S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Marking Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS arrays, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
SMAJ SERIES. Surface Mount Transient Voltage Suppressor Diodes
Surface Mount Transient Voltage Suppressor Diodes Features Low profile package Ideal for automated placement Glass passivated chip junction High forward surge capability Available in uni-directional 400
SP2555NUTG 2.5V 45A Diode Array
SP2555NUTG 2.5V 45A Diode Array RoHS Pb GREEN Description The SP2555NUTG is a low-capacitance, TVS Diode Array designed to provide protection against ESD (electrostatic discharge), CDE (cable discharge
TVS Diode Arrays (SPA Diodes)
SP1005 Series 30pF 30kV Bidirectional Discrete TVS RoHS Pb GREEN Description The SP1005 includes back-to-back Zener diodes fabricated in a proprietary silicon avalanche technology to provide protection
INPAQ. Specification TVN AB0. Product Name Transient Voltage Suppressor Series TVS Series Part No TVN AB0 Size EIA 0201
TVN 0201 01 AB0 Specification Product Name Transient Voltage Suppressor Series TVS Series Part No TVN 020101 AB0 Size EIA 0201 TVN 0201 01 AB0 Engineering Specification 1. Scope TVN 0201 01 AB0 is a TVS
Features. Applications
Description are surge rated diode arrays designed to protect high speed data interfaces. The SR series has been specifically designed to protect sensitive components which are connected to data and transmission
SP2574NUTG 2.5V 40A Diode Array
TVS Diode Arrays (SPA Diodes 2.5V 40A Diode Array RoHS Pb GREEN Description The is a low-capacitance, TVS Diode Array designed to provide protection against ESD (electrostatic discharge, CDE (cable discharge
UM5304EEBF. Quad Channel Low Capacitance ESD Protection Array UM5304EEAF SC70-6/SC88/SOT363 UM5304EECF TSOP-6/SOT23-6. General Description
Quad Channel Low Capacitance ESD Protection Array UM5304EEAF SC70-6/SC88/SOT363 UM5304EEBF SC89-6/SOT563/SOT666 UM5304EECF TSOP-6/SOT23-6 General Description UM5304EEXF are surge rated diode arrays designed
PESDLC553T5VU Low Capacitance ESD Protector
Description The is a TVS array designed to protect I/O or data lines from the damaging effects of ESD. It is low capacitance transient voltage suppressors for high speed data interface that designed to
SRV05-4A TVS Arrays. Mechanical Characteristics. Applications
SRV05-4A TVS Arrays Description The SRV05-4A is a low capacitance TVS (Transient Voltage Suppressor) array designed to protect sensitive semiconductor components from electrical overstress when interfaced
SMS Volt TVS Array For ESD and Latch-Up Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Description The SMS series of TS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD, lightning, and other voltage-induced transient events. Each device will protect
PESDALC143T5VU Low Capacitance ESD Protector
Low Capacitance ESD Protector Description The is low capacitance transient voltage suppressor for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to
UM5204EEBF. Quad Channel Low Capacitance ESD Protection Array UM5204EEAF SC70-6/SC88/SOT363 UM5204EECF TSOP-6/SOT23-6. General Description
Quad Channel Low Capacitance ESD Protection Array UM5204EEAF SC70-6/SC88/SOT363 UM5204EEBF SC89-6/SOT563/SOT666 UM5204EECF TSOP-6/SOT23-6 General Description are surge rated diode arrays designed to protect
BAT42W/BAT43W SURFACE MOUNT SCHOTTKY BARRIER DIODE
Features: Low Turn-on Voltage Fast Switching PN Junction Guard Ring Transient and ESD Protection Designed for Surface Mount Application Plastic Material UL Recognition Flammability Classification 94V-O
PTVSLC3D5VB Low Capacitance TVS
Low Capacitance TVS Description The is a low capacitance transient voltage suppressor for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to ESD lightning,
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors DO-214AA (SMB J-Bend) PRIMARY CHARACTERISTICS V BR (uni-directional) 6.4 V to 49.1 V V BR (bi-directional) 6.4 V to 49.1 V V WM
AOZ8251. One-line Bidirectional TVS Diode. Features. General Description. Applications. Signal Line
One-line Bidirectional TVS Diode General Description The AOZ8251 is a one-line bidirectional transient voltage suppressor diode designed to protect high speed data lines and voltage sensitive electronics
JIEJIE MICROELECTRONICS CO., Ltd
JIEJIE MICROELECTRONICS CO., Ltd 20KP Series 20KW Transient Voltage Suppressor Rev.2.3 DESCRIPTION: The 20KP series of high current uni/bi-directional transient suppressors are designed for A.C. line protection
SP11xx Series Discrete Unidirectional TVS Diode
SP11xx Series Discrete Unidirectional TVS Diode RoHS Pb GREEN Description Zener diodes fabricated in a proprietary silicon avalanche technology protect each I/O pin to provide a high level of protection
ST0561D4. 1-Line Bi-directional TVS Diode. Description. Mechanical Characteristics. Applications. Features. Ordering Information
-Line Bi-directional TVS Diode Description The ST56D4 is a bi-directional TVS diode, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making this
1.5KE SERIES. Transient Voltage Suppressor Diodes
RoHS COMPLIANT Transient Voltage Suppressor Diodes Features Excellent clamping capability Low dynamic impedance Solder dip 275 C max. 7 s, per JESD 22-B106 Mechanical Data Package: DO-201AE Molding compound
JIEJIE MICROELECTRONICS CO., Ltd
JIEJIE MICROELECTRONICS CO., Ltd JEUSR70 Low Capacitance TVS Diode Array Rev.1.2 FEATURES: Protects two I/O lines Low clamping voltage Array of surge rated, low capacitance diodes Solid-state silicon-avalanche
SP pF 30kV Bidirectional Discrete TVS
SP1326 15pF 30kV Bidirectional Discrete TVS RoHS Pb GREEN Description The SP1326 back-to-back diodes are fabricated in a proprietary silicon avalanche technology. These diodes provide a high ESD (electrostatic
0504A PESDR0504S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Marking Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS array, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
PTVSLC3D24VB Low Capacitance TVS
Description The is a low capacitance transient voltage suppressor for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to ESD lightning, and other voltage
Features. Product Compliance Marking Reel Size (inches) Tape Width (mm) Quantity per Reel D5V0P4UR6SO-7 Standard DE ,000/Tape & Reel
YM ADVANCE INFORMATION CHANNEL LOW CAPACITANCE TVS DIODE ARRAY Product Summary V BR (Min) I PP (Max) C T (Typ).5V 5A.1pF Description The is a high-performance device suitable for protecting four high-speed
JIEJIE MICROELECTRONICS CO., Ltd
JIEJIE MICROELECTRONICS CO., Ltd SRV05 4B TVS Diode Array Rev.1.0 FEATURES: Protects four I/O lines Low clamping voltage Low operating voltage Low capacitance RoHS compliant MAIN APPLICATIONS SOT23-6L
RClamp3374N. High Power TVS for Ethernet Interfaces. PRELIMINARY Features
PROTECTION PRODUCTS - RailClamp Description RailClamp TS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage
INPAQ Global RF/Component Solutions
TVN 0201 01 SP0 Specification Product Name Series Part No Transient Voltage Suppressor TVS Series TVN 0201 01 SP0 Size EIA 0201 TVN 0201 01 SP0 Engineering Specification 1. Scope TVN 0201 01 SP0 is a TVS
Description Mechanical Characteristics Features Applications Ordering Information Part Number Packaging Reel Size
ST36D4 -Line Bi-directional TVS Diode Description The ST36D4 is a bi-directional TVS diode, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
INPAQ. Specification TEA10402V15A0. Product Name. ESD Guard TM TEA Series (Thin Film Air Gap) Size EIA Global RF/Component Solutions
TEA10402V15A0 Specification Product Name Series Part No ESD Guard TM TEA Series (Thin Film Air Gap) TEA10402V15A0 Size EIA 0402 TEA10402V15A0 Engineering Specification 1. Scope TEA series is designed to
AZ H Transient Voltage Suppressing Device For ESD/Transient Protection. Features. Circuit Diagram / Pin Configuration. Applications.
Features ESD Protection for Line with Bi-directional. Provide ESD protection for the protected line to IEC 6000-4- (ESD) ±0kV (air), ±kv (contact) IEC 6000-4-4 (EFT) 40A (5/50ns) IEC 6000-4-5 (Lightning)
WS05R. Features SOT-143. Transient Voltage Suppressor IEC COMPATIBILITY (EN ) Pin 4. Pin 3. Pin 2. Pin 1 SOT-143 (Top View)
Document: W, Rev: C Transient Voltage Suppressor Features 5 Watts Peak Power per Line (tp = 8/μs) Protects two I/O lines Low operating voltage: 5V Ultra Low capacitance(