CONTENTS. AA TM 250/425 Thermal Entrances
|
|
- Blake Nash
- 5 years ago
- Views:
Transcription
1 EFFECTIVE FEBRUARY 1, 2018 CONTENTS A9/1 CONTENTS SECTION A9...AA TM 250/425 THERMAL ENTRANCES* PAGE AA TM 250/425 BASE DOOR DOOR CHASSIS... A9/3 DOOR GLAZING/WEATHERING OPTIONS... A9/4 DOOR BOTTOM RAIL SUBSTITUTIONS... A9/5 DOOR CROSS RAIL/MUNTIN ADDITIONS... A9/5 FRAMES PACKAGES TRIFAB TM 451T FRAMES (2" x 4-1/2")... A9/6 SPECIAL FABRICATED FRAMES TRIFAB TM 451T THERMAL DOOR FRAMES (2" x 4-1/2")... A9/7 TRIFAB TM 601T/601UT DOOR FRAMES (2" x 6" THERMALLY BROKEN FRAMES)... A9/7 TRANSOM BAR/DOOR HEADER & THRESHOLD PACKAGES S/A OFFSET ARM TRANSOM/HEADER & THRESHOLD PACKAGES... A9/8 STANDARD HINGING HARDWARE OFFSET PIVOTS... A9/9 BUTT HINGES/CONTINUOUS GEARED HINGE... A9/10 LOCKING HARDWARE STANDARD LOCKS... A9/11 MULTI-POINT LOCK ADDITIONS... A9/12 ACCESSORIES FOR STANDARD LOCKS... A9/13 EXIT DEVICE HARDWARE CONCEALED EXIT DEVICES AND ACCESSORIES... A9/14 A9/15 RIM EXIT DEVICES AND ACCESSORIES... A9/16 A9/18 STANDARD PUSH/PULLS ARCHITECTS CLASSIC PUSH/PULL SETS... A9/19 PULLS... A9/20 Continued on next page * Note: For hardware not listed in the price catalogue, consult estimating! Note: Kawneer entrances in this price book are outswing in recognition of building code life safety considerations.
2 A9/2 CONTENTS/FINISH GROUPS EFFECTIVE FEBRUARY 1, 2018 PAGE HARDWARE BY OTHERS* HINGING HARDWARE... A9/21 PIVOTING HARDWARE... A9/21 LOCKING HARDWARE... A9/22 A9/24 EXIT DEVICE HARDWARE... A9/25 A9/26 CLOSERS AND DOOR HOLDERS... A9/27 MISCELLANEOUS HARDWARE... A9/28 GROUP NO. DESIGNATION FINISHES INCLUDED #17 GRP #17 CLEAR #40 GRP #40 BRONZE #22 STD. PAINT #14 CLEAR #29 GRP #29 BLACK #18 CHAMPAGNE #26 LIGHT BRONZE #28 MEDIUM BRONZE NOTICE! Laws and building safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operation hardware, or glazing materials, and assumes no responsibility therefore. It is responsibility of the owner, the architect, and the installer to make these selections in strict conformity to all applicable laws and building codes. * Note: For hardware not listed in the price catalogue, consult estimating! Note: Kawneer entrances in this price book are outswing in recognition of building code life safety considerations.
3 EFFECTIVE FEBRUARY 1, 2018 DOOR CHASSIS A9/3 PRICE INCLUDES: 1. BLANK DOOR UP TO 3'0" X 8'0". (FOR DOORS EXCEEDING 3'6" X 8'0", CONSULT FACTORY.) 2. 1" GLASS STOPS. 3. GLAZING GASKETS. 4. DOOR BOTTOM RAIL WEATHER STRIPPING (INTERIOR AND EXTERIOR) SPECIAL DOOR PRICING ADD THE FOLLOWING: 1. BASE DOOR CHASSIS: AS LISTED BELOW: 2. HINGING HARDWARE: SELECT THE DESIRED HINGING METHOD AND ADD THE PRICE OF THE HARDWARE. 3. OPTIONS: ADD THE PRICE OF ALL OTHER OPTIONS REQUIRED FOR DOOR AND/OR FRAME, BE SURE TO ADD HARDWARE AND PREPARATION CHARGES. PART NUMBER STRUCTURE SAMPLE FOR BLANK DOORS PRODUCT CODE + HANDLE + PIVOTING + LOCKING 250 = 250 NARROW 425 = 425 WIDE S = SINGLE P = PAIR BV = BEVELED STILE OFFSET PIVOT BR = BEVELED RABBETED BH = BUTT HUNG BK = BLANK DOOR CHASSIS NARROW STILE 250 WIDE STILE 425 SINGLE PAIR SINGLE PAIR DOOR OPENING SIZE UP TO 3'0" x 8'0" 6'0" x 8'0" 3'0" x 8'0" 6'0" x 8'0" BEVELED STILES For offset pivot doors PART NO. 250SBVBK 250PBVBK 425SBVBK 425PBVBK BEVELED STILES For butt hung doors PART NO. 250SBHBK 250PBHBK 425SBHBK 425PBHBK BEVELED STILES For continuous hinge doors Use of this stile will not affect glass size PART NO. 250SBRBK 250PBRBK 425SBRBK 425PBRBK #17 GRP $ $ $ $ #40 GRP $ $ $ $ #29 GRP $ $ $ $ PART NUMBER SPECIAL WIDTH DOOR A9 $ PRICE
4 A9/4 DOOR GLAZING/WEATHERING OPTIONS EFFECTIVE FEBRUARY 1, 2018 Door Bottom Weathering PART NO. #17 GRP #40 GRP #29 GRP INTERIOR WEATHER SWEEPS FOR 3'0" DOOR I $16.00 $18.00 $20.00 FOR 3'6" DOOR I VARIABLE TO 4'0" I FOR 6'0" PAIRS I EXTERIOR WEATHER SWEEP FOR 3'0" OFFSET PIVOT DOOR P FOR 3'6" OFFSET PIVOT DOOR P VARIABLE TO 4'0" OFFSET PIVOT DOOR P FOR 6'0" OFFSET PIVOT PAIRS P FOR 3'0" BUTT HINGE B FOR 3'6" BUTT HINGE B VARIABLE TO 4'0" BUTT HINGES B FOR 6'0" BUTT HINGE B FOR 3'0" CONTINUOUS GEAR HINGE DOOR C FOR 3'6" CONTINUOUS GEAR HINGE DOOR C VARIABLE TO 4'0" CONTINUOUS GEAR HINGE DOORS C FOR 6'0" CONTINUOUS GEAR HINGE PAIRS C
5 EFFECTIVE FEBRUARY 1, 2018 Note: 1. All prices are per leaf unless noted otherwise. DOOR BOTTOM RAIL SUBSTITUTIONS FABRICATED PRICE A9/5 Substitute Bottom Rails PART NO. #17 GRP #40 GRP #29 GRP 3-7/8" BOTTOM RAIL IN AA TM 425 THERMAL DOOR A9 DEDUCT $ (36.00) DEDUCT $ (40.00) DEDUCT $ (44.00) 6-1/2" BOTTOM RAIL IN AA TM 250 THERMAL DOOR A " BOTTOM RAIL IN AA TM 250 AND AA TM 425 THERMAL DOOR A Note: 1. All prices are per foot unless noted otherwise. 2. Set charges are required with all cross rail muntins. 3. When adding cross rails to doors select push/pull sets which contain double bend (CP-II) push bars from page A9/19. PER FOOT PRICE Cross Rails PART NO. #17 GRP #40 GRP #29 GRP 1-3/8" CROSS RAIL A9 $20.00/FT $28.00/FT $40.00/FT 8-1/4" CROSS RAIL A /FT 98.00/FT /FT PART NUMBER PRICE CROSS RAIL SETUP CHARGE Per rail setup charge A9 $130.00
6 A9/6 DOOR FRAMES EFFECTIVE FEBRUARY 1, 2018 PRICE INCLUDES: 1. TRIFAB TM 451T FRAME FABRICATED. 2. FRAME WITH TRANSOM AREA (10'3-1/2") INCLUDES TRANSOM BAR, GLASS STOPS AND GASKETS FOR 1" INFILL. 3. FRAME INCLUDES THRESHOLD (STANDARD 4-19/32" WIDE THERMALLY BROKEN). 4. SELECT PUSH/PULL HARDWARE FROM PAGE A9/19. NOTE: ALL CLOSERS SOLD SEPARATELY, SELECT CLOSER FROM SECTION A3/2 TO A3/4. FRAME ONLY TRIFAB TM 451T DOOR FRAME SINGLE SINGLE PAIR PAIR DOOR OPENING 3'0" x 8'0" 3'0" x 8'0" 6'0" x 8'0" 6'0" x 8'0" PART NO. 451TS 451TSTR 451TP 451TPTR #17 GROUP $ $ $ $ #40 GROUP #29 GROUP
7 EFFECTIVE FEBRUARY 1, 2018 SPECIAL FABRICATED FRAMES A9/7 PRICE INCLUDES: 1. FABRICATION OF DOOR FRAMES. 2. APPLICABLE GLASS STOPS AND DOOR STOPS. 3. GLAZING GASKETS. 4. FRAME CLIPS & SCREWS (JOINT CHARGES INCLUDED). 5. FRAMING IS FACTORY FABRICATED AND SHIPPED K.D. NOT INCLUDED: 1. PERIMETER FASTENERS OR PREPARATION. 2. PERIMETER RECEPTORS OR SILL FLASHING. 3. BRAKES OR SPECIAL FILLERS. 4. SASH OR SASH ATTACHMENT. 5. ASSEMBLY OF FRAME. PRICING NOTES: 1. DETERMINE THE TOTAL LINEAR FEET OF FRAMING REQUIRED AND MULTIPLY BY THE LINEAR PER FOOT CHARGE OF THE FRAMING MEMBERS YOU SELECT (TO THE NEXT LARGER FOOT). 2. ADD THE FRAME PREPARATION CHARGES FOR ANY OPTIONS REQUIRED. 3. CONSULT ARCHITECTURAL DETAILS FOR STRUCTURAL LIMITATIONS. 4. FOR JOINTS OTHER THAN 90, CONTACT THE FACTORY FOR PRICING. Trifab TM 451T Thermal Door Frames (2" x 4-1/2") Special Moldings Door Jamb (Thermal) Header/ T-Bar (3) (Thermal) Transom Head Shear Block Transom Head (3) (Non-Thermal) /32" Threshold PART NO A A A A A9 #17 GRP $33.84 $30.40 $13.52 $25.53 #40 GRP #29 GRP $19.22 (#10 Mill) Trifab TM 601T/601UT Thermal Door Frames (2" x 6") Special Moldings Door Jamb (1) (2-1/4" Door Depth) Header/ T-Bar (2) (2-1/4" Door Depth) Head (Outside Glazed) Head (Inside Glazed) Head (Outside Glazed) Head (Inside Glazed) Transom Head (Non-Thermal) (2-1/4" Door Depth) 4-19/32" Std. Threshold Optional 6-3/4" Threshold PART NO. 601UT9137A9 601UT9138A9 601T9134A9 601T9135A9 601UT9134A9 601UT9135A A A A9 #17 GRP $38.96 $34.96 $21.66 $24.10 $22.96 $25.55 $32.74 #40 GRP #29 GRP $19.22 (#10 Mill) (1) DOOR JAMB WITH NON-CONDUCTIVE DOOR STOP WITH ALUMINUM SNAP-ON COVER FOR 2-1/4" DOOR DEPTHS. (2) T-BAR /HEADER WITH NON-CONDUCTIVE DOOR STOP WITH ALUMINUM SNAP-ON COVER FOR 2-1/4" DOOR DEPTHS AND SURFACE MOUNTED CLOSERS. (3) TO SUBSTITUTE SILICONE SETTING BLOCKS, USE PART NUMBER A9, AND ADD $4.40 PER FOOT. $10.02 (#10 Mill)
8 A9/8 S/A OFFSET ARM TRANSOM/HEADER & THRESHOLD EFFECTIVE FEBRUARY 1, 2018 Price includes: Fabricated header/transom bar, glass stops, mounting trays, horizontal door stop and weathering, frame clips, tray clips, threshold and screws. Select concealed overhead closer from page A3/4. Select closer arm from page A3/6. Maximum door sizes: 3'0" x 8'0" or 3'6" x 7'6". Minimum door width: 2'6". It is necessary that the customer inform Kawneer of any project conditions that will have an impact on closer strength selection. Standard closer selection will apply if no such information is supplied. Center hung door applications are not available. S/A Offset Arm in TRIFAB TM VG 451 Description Single Door 3'0" Pair of Doors 6'0" S/A Offset Arm Header Package Offset pivot Butt hung Continuous gear S/A Offset Arm Transom Package Offset pivot Butt hung Continuous gear Part No. #17 GRP #40 GRP #29 GRP Part No. #17 GRP #40 GRP #29 GRP A9 RH A9 LH A9 RH A9 LH A9 RH A9 LH A9 RH A9 LH $ $ $ A9 $ $ $ $ $ $ A9 $ $ $ $ $ $ A9 $ $ $ $ $ $ A9 $ $ $ S/A Offset Arm in TRIFAB TM 601 Description Single Door 3'0" Pair of Doors 6'0" S/A Offset Arm Header Package Offset pivot Butt hung Continuous gear S/A Offset Arm Transom Package Offset pivot Butt hung Continuous gear Special Size Charge: No charge - for single transom/header packages under 3'0", A9 (NO CHARGE). Add - for single transom/header packages over 3'0" up to 3'6", A9 $ Add - for pairs transom/header packages over 6'0", A9 $ Prep Charge: To prep for concealed rod exit device, use part number A9 and add $ To prep for 3-point lock use part number A9 and add $ Part No. #17 GRP #40 GRP #29 GRP Part No. #17 GRP #40 GRP #29 GRP A9 RH A9 LH A9 RH A9 LH A9 RH A9 LH A9 RH A9 LH $ $ $ A9 $ $ $ $ $ $ A9 $ $ $ $ $ $ A9 $ $ $ $ $ $ A9 $ $ $ Optional: Delete threshold, use part A9 and delete $(21.00) Single. Delete threshold, use part A9 and delete $(38.00) Pair.
9 EFFECTIVE FEBRUARY 1, 2018 OFFSET PIVOTS A9/9 Note: 1. Refer to the general information section for hardware color combinations. Rule of Thumb for Adding Intermediate Pivots Door Height Over 7'6" Intermediate Add One (1) Pivot Offset Pivots Part No. #17 #40 #29 Top offset pivot (4) (Kawneer standard) Bottom offset pivot (4) (For use with threshold) Bottom offset pivot (4) (For use without threshold) Intermediate offset pivot (4) (Kawneer standard) Price HARDWARE + DOOR PREP A9 $23.00 $24.00 $27.00 FRAME PREP A HARDWARE + DOOR PREP A FRAME PREP A HARDWARE + DOOR PREP A (4, 5) Intermediate electric transfer offset pivot (Kawneer standard) (Wiring prep not included) Intermediate offset pivot (optional) (Rixson M-19 of IVES 7215) EL Intermediate offset pivot (optional) (Rixson M-19 of IVES 7215) (Includes offset pivot and wiring harness) HARDWARE + DOOR PREP A FRAME PREP A HARDWARE + DOOR PREP (INCLUDES OFFSET PIVOT & WIRING HARNESS) A9(RH) A9(LH) FRAME PREP A HARDWARE + DOOR PREP A FRAME PREP A HARDWARE + DOOR PREP (RH) A HARDWARE + DOOR PREP (LH) A FRAME PREP A (4) Offset Pivot Paint Charge PER DOOR PAINT CHARGE A (5) For eight wire electric transfer consult factory.
10 A9/10 BUTT HINGES/CONTINUOUS GEARED HINGE EFFECTIVE FEBRUARY 1, 2018 Note: Prices for hardware listed are per item. Example: Select (3) butt hinges to receive 1-1/2 pairs of butts per leaf on a single door. Price Butt Hinges Part No. #17 #40 #29 4-1/2" x 4" 304 Stainless Steel with N.R.P. (Rounded corners) 4-1/2" x 4" N.R.P. Stainless Steel Ball Bearing Hinge (US 32D) (Rounded corners) 4-1/2" x 4" Electric Transfer (5) (Rounded corners) (Wiring prep not included) Hardware + door prep (Includes hinge & wiring harness) HARDWARE + DOOR PREP A9 $ $69.00 FRAME PREP A HARDWARE + DOOR PREP A (US 32D) FRAME PREP A HARDWARE + DOOR PREP (INCLUDES OFFSET PIVOT & WIRING HARNESS) A FRAME PREP A Continuous Geared Hinge Part No. #17 #40 #29 Price Up to 7'0" HARDWARE + DOOR PREP A9 $ $ $ Up to 8'0" HARDWARE + DOOR PREP A FRAME PREP A (5) For eight wire electric transfer consult factory. Rule of Thumb for Adding Intermediate Pivots Door Height Intermediate All Doors Add One (1) Hinge Over 7'3" Add Two (2) Hinges
11 EFFECTIVE FEBRUARY 1, 2018 STANDARD LOCKS A9/11 1. Locking options do not include the cylinders or lock operators. Select cylinders and lock operators separately. 2. Backset for all locks listed on this page is 1-1/8". 3. Refer to the general information section for hardware color combinations. Price Locking Hardware Options Part No. #17 #40 #29 Standard Adams Rite MS 1850 Lock (Rounded corners) HARDWARE + DOOR PREP A9 $37.00 $41.00 $45.00 Single FRAME PREP A HARDWARE + DOOR PREP A Pair FRAME PREP Adams Rite MS 1850 Hookbolt Lock HARDWARE + DOOR PREP A Single FRAME PREP A Adams Rite 4510 Latch Lock HARDWARE + DOOR PREP A Single FRAME PREP A Adams Rite MS+1890 Deadbolt Latch Lock HARDWARE + DOOR PREP A Single FRAME PREP A Adams Rite MS 2190 Deadbolt Latch Lock (The MS 2190 requires the use of CO12 Pulls, select the correct push/ pull combinations from A9/18-19.) HARDWARE + DOOR PREP A Single FRAME PREP A Kawneer Flush Bolts* (For use on pairs of doors with MS & latch locks) Price includes: One (1) pair of flush bolts. HARDWARE + DOOR PREP A FRAME PREP A *Some building codes, with some qualifications, prohibit the use of manual flush bolts on exit doors needed to handle the occupant load of the building. Please consult with your local code to verify the use of manual flush bolts for your specific application.
12 A9/12 MULTI-POINT LOCK ADDITIONS EFFECTIVE FEBRUARY 1, point locking option does not include the MS lock, cylinders or lock operators. Select MS 1850 lock, cylinders and lock operators sold separately. 2. Backset for all locks listed on this page 1-1/8". Multi-point Locking Hardware Options Part No. Price Adams Rite 4015 two point lock (For use in single or pairs of doors.) Includes conversion kit for standard MS 1850 lock to 2-point lock. Adams Rite 4015 & three point lock (For use on single or pairs of doors. When used on pairs inactive leaf requires Kawneer Flush Bolts.) Includes conversion kit for standard MS 1850 lock to 3-point lock. HARDWARE + DOOR PREP A9 $ FRAME PREP A HARDWARE + DOOR PREP A FRAME PREP A
13 EFFECTIVE FEBRUARY 1, 2018 ACCESSORIES FOR STANDARD LOCKS A9/13 Note: 1. Refer to the general information section for hardware color combinations. Accessories for use with Locking Hardware Options on Page A9/11 Price Part No. #17 #40 #29 Adams Rite 4560 Lever Handle (For use on 4510 Latch Lock, and MS+1890 & 2190 Deadbolt Latch Locks) Standard 3-1/2" handle. Single Only HARDWARE + DOOR PREP A9 $ $ $ Adams Rite 4590 Latch Paddle (For use on 4510 Latch Lock, and MS+1890 & 2190 Deadbolt Latch Locks) Optional paddle. Single Only HARDWARE + DOOR PREP A Adams Rite 7130 Electric Strike (For use on 4510 latch locks only.) Note: Intermediate electric transfer offset pivot, on page A9/9. 4-1/2" x 4" electric transfer butt hinge, on page A9/10. HARDWARE ONLY CONTINUOUS DUTY (NO DOOR PREP) A HARDWARE ONLY (NO DOOR PREP) INTERMITTENT DUTY A Single Only FRAME PREP A MS Cylinder Guard (For exterior use only with Kawneer standard cylinders.) Note: N/A with exit devices. Cylinder for MS & Latch Locks Price includes: 1. Hardware + door prep. Thumbturn for MS Locks Cylinder for MS & Latch Locks Price includes: 1. Hardware + door prep. HARDWARE + DOOR PREP A KEYED INDIVIDUALLY A KEYED ALIKE (in groups of 50) A A KEYED IN PAIRS (back to back) A KEYED ALIKE (in groups of 50) A
14 A9/14 CONCEALED EXIT DEVICES AND ACCESSORIES EFFECTIVE FEBRUARY 1, Exit device options do not include the cylinders or pull handles. Select cylinders and pull handles separately. 2. Refer to the general information section for hardware color combinations. 3. Prices are for 3'0" x 7'0" door leaf. For special size concealed exit device use part A9 and add $ list per leaf. Concealed Exit Device Hardware Options Note: Hardware + door preparation prices are per leaf. Double for pairs of doors. Part No. #17 #40 #29 Kawneer Concealed Rod Exit Device Kawneer 1686 Concealed Rod Exit Device Exit device with hex-key dogging Kawneer 1686 Concealed Rod Exit Device Exit device with cylinder dogging Kawneer 1686 Lever Handle Price HARDWARE + DOOR PREP A9 $ $ FRAME PREP A HARDWARE + DOOR PREP CDA FRAME PREP A HARDWARE + DOOR PREP A Cylinder KEYED INDIVIDUALLY A Cylinder with mounting pad for Exit Devices (For use with Kawneer 1686 exit device) KEYED ALIKE (in groups of 50) A DUMMY CYLINDER A Falcon Concealed Rod Exit Device Falcon 1690 Exit Device Exit device. Falcon 1990 Concealed Rod Exit Device Crash bar exit device. Cylinder for Exit Devices (For use with Falcon 1690, 1990 and 2090 exit devices) KEYED INDIVIDUALLY A KEYED ALIKE (in groups of 50) A HARDWARE + DOOR PREP A FRAME PREP A HARDWARE + DOOR PREP A FRAME PREP A KEYED INDIVIDUALLY A KEYED ALIKE (in groups of 50) A
15 EFFECTIVE FEBRUARY 1, 2018 CONCEALED EXIT DEVICES AND ACCESSORIES A9/15 1. Exit device options do not include the cylinders or pull handles. Select cylinders and pull handles separately. 2. Refer to the general information section for hardware color combinations. 3. Price are for a 3'0" x 7'0" door leaf. For special size concealed exit device use part A9 and add $ list per leaf. Concealed Exit Device Hardware Options Note: Hardware + door preparation prices are per leaf. Double for pairs of doors. Part No. #17 #40 #29 Von Duprin Concealed Rod Exit Device Von Duprin 3347A Concealed Rod Exit Device Exit Device (For use on AA TM 250 & AA TM 425 pairs only) Von Duprin 3347A Night Latch Cylinder Assembly (For use on AA TM 250 & AA TM 425 pairs only) Von Duprin 9947 Concealed Rod Exit Device Exit Device (For use on AA TM 425 only) Von Duprin 9947 Night Latch Cylinder Assembly HARDWARE + DOOR PREP A9 US28 $ Price 313 $ FRAME PREP A HARDWARE + DOOR PREP HARDWARE + DOOR PREP A A9 US26D US US10B FRAME PREP A $ SPBLK Adams Rite Concealed Rod Exit Device (For use on AA TM 425 only) Cylinder for Exit Device (For use with Von Duprin 33 & 99) Hardware and door prep. Adams Rite 8600 Concealed Exit Device HARDWARE + DOOR PREP KEYED INDIVIDUALLY Escutcheon Plate Cylinder Guard (For use with Adams Rite 8600 concealed exit devices, when cylinder is required.) Cylinder for Adams Rite 8600 Price includes: Hardware and door prep A A9 US26D US10B SPBLK HARDWARE + DOOR PREP A FRAME PREP A HARDWARE + DOOR PREP A KEYED INDIVIDUALLY A KEYED ALIKE (in groups of 50) A
16 A9/16 RIM EXIT DEVICES AND ACCESSORIES EFFECTIVE FEBRUARY 1, Exit device options do not include the cylinders or pull handles. Select cylinders and pull handles separately. 2. Refer to the general information section for hardware color combinations. 3. Prices are for a 3'0" wide door leaf. For special size exit devices use part A9 and add $85.00 list per leaf. 4. Rim exit devices not compatible on center hung doors with standard frame offerings. Rim Exit Device Hardware Options Note: Hardware + door preparation prices are per leaf. Double for pairs of doors. Part No. #17 #40 #29 Kawneer Rim Exit Device Kawneer 1786 Rim Exit Device Rim exit device with hex-key dogging. Kawneer 1786 Rim Exit Device Rim exit device with cylinder dogging. Kawneer 1786 Lever Handle Price HARDWARE + DOOR PREP A9 $ $ FRAME PREP (Single Door) A HARDWARE + DOOR PREP CDA FRAME PREP (Single Door) A HARDWARE + DOOR PREP A Cylinder KEYED INDIVIDUALLY A RM-86 Removable Mullion Maximum height of 8'0" KEYED ALIKE (in groups of 50) A DUMMY CYLINDER A For Kawneer 1786 Exit Device UP TO 7'0" HARDWARE A Cylinder for Exit Devices (For use with Kawneer 1786 exit devices) UP TO 8'0" HARDWARE A UP TO 10'0" HARDWARE A FRAME PREP A KEYED INDIVIDUALLY A KEYED ALIKE (in groups of 50) A
17 EFFECTIVE FEBRUARY 1, 2018 RIM EXIT DEVICES AND ACCESSORIES A9/17 1. Exit device options do not include the cylinders or pull handles. Select cylinders and pull handles separately. 2. Refer to the general information section for hardware color combinations. 3. Prices are for a 3'0" wide door leaf. For special size exit devices use part A9 and add $85.00 list per leaf. 4. Rim exit devices not compatible on center hung doors with standard frame offerings. Rim Exit Device Hardware Options Note: Hardware + door preparation prices are per leaf. Double for pairs of doors. Part No. #17 #40 #29 Falcon Rim Exit Device Falcon 1790 Exit Device Exit device. HARDWARE + DOOR PREP A FRAME PREP (Single Door) A Falcon 2090 Rim Exit Device Crash bar exit device. (See page A9/14 for cylinder) HARDWARE + DOOR PREP A FRAME PREP (Single Door) A Falcon RM-170/RM-70 Removable Mullion (For use with pairs for 1790 & 2090 rim exit devices.) Price includes (2) interlocking mullions stabilizers maximum height of 8'0". RM-170 for 1790 exit device UP TO 7'0" HARDWARE A UP TO 8'0" HARDWARE A FRAME PREP A RM-70 for 2090 exit device UP TO 7'0" HARDWARE A UP TO 8'0" HARDWARE A FRAME PREP A Cylinder for Exit Devices (For use with Falcon 1790 and 2090 exit devices) Price KEYED INDIVIDUALLY A KEYED ALIKE (in groups of 50) A
18 A9/18 RIM EXIT DEVICES AND ACCESSORIES EFFECTIVE FEBRUARY 1, Select pull handles from page A9/ Refer to the general information section for hardware color combinations. 3. Price are for a 3'0" wide door leaf. For special size rim exit device use part A9 and add $50.00 list per leaf. Adams Rite Rim Exit Device Hardware Options Note: Hardware + door preparation prices are per leaf. Part No. #17 #40 #29 Adams Rite Rim Exit Device Adams Rite 8400 Rim Exit Device (Single door only.) Cylinder for Adams Rite 8400 Price includes: Hardware and door prep. Price HARDWARE + DOOR PREP A9 $ $ $ FRAME PREP A KEYED INDIVIDUALLY A KEYED ALIKE (in groups of 50) A
19 EFFECTIVE FEBRUARY 1, 2018 ARCHITECTS CLASSIC PUSH/PULL SETS A9/19 1. Push/pull prices are per leaf and include attachment screws and the preparation to the door. 2. For pairs of doors, (2) sets are required. 3. Refer to the general information section for hardware color combinations. Architects Classic Push/Pull Sets Style CO-9/CP Style CO-12/CP Style CP Push Bars (2) Style CO-9/CP-II Not for use on D/A doors. Style CO-12/CP-II Not for use on D/A doors. Style CP-II Push Bars (2) Not for use on D/A doors. Style CO-9/CO-9 Style CO-12/CO-12 (Note: Contact factory for mounting location of the CO12/CO12 and lock.) Finish Group Part No. NO. 1 NO. 2 NO.3 = 3'0" PA9 $74.00 $ $ = 3'6" PA VAR. TO 4'0" PA = 3'0" PA = 3'6" PA VAR. TO 4'0" PA = 3'0" PA = 3'6" PA VAR. TO 4'0" PA = 3'0" PA = 3'6" PA VAR. TO 4'0" PA = 3'0" PA = 3'6" PA VAR. TO 4'0" PA = 3'0" PA = 3'6" PA VAR. TO 4'0" PA PER LEAF PA PER LEAF PA Color Material Identification Aluminum, Clear Anodized #14 Black Permanodic TM #29 Dark Bronze Permanodic TM #40 Stainless Steel, US 32 #45 US 32D #46 Bronze, US 10B #44 Bright Brass, PVD (US 3) #47
20 A9/20 PULLS EFFECTIVE FEBRUARY 1, Push/pull prices are per leaf and include attachment screws and the preparation to the door. 2. For pairs of doors, (2) sets are required. 3. Refer to the general information section for hardware color combinations. Pulls Style CO-9 For one (1) style CO-9 pull handle. Style CO-12 For one (1) style CO-12 pull handle. Finish Group Part No. NO. 1 NO. 2 NO PA9 $35.00 $72.00 $ PA Color Material Identification Aluminum, Clear Anodized #14 Black Permanodic TM #29 Dark Bronze Permanodic TM #40 Stainless Steel, US 32 #45 US 32D #46 Bronze, US 10B #44 Bright Brass, PVD (US 3) #47
21 EFFECTIVE FEBRUARY 1, 2018 HINGING AND PIVOTING HARDWARE A9/21 1. All prices are per item. 2. Part numbers do not imply hardware/door/frame compatibility. 3. Verify all hardware applications and combinations with an appropriate hardware consultant. 4. When hardware needs to be applied to both door and frame, the hardware will typically be applied to and shipped with the door. BUTT HINGES (per hinge) STANDARD 4-1/2" x 4" TEMPLATE BUTT HINGE PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A9 $ FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA ALL OTHER BUTT HINGES COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA ANCHOR HINGE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA CONTINUOUS HINGES CONTINUOUS HINGE - UP TO 8'0" DOOR PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A9 $ FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA OFFSET PIVOTS TOP OFFSET PIVOT PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A9 $ FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA INTERMEDIATE PIVOT COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA BOTTOM OFFSET PIVOT COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA
22 A9/22 LOCKING HARDWARE EFFECTIVE FEBRUARY 1, All prices are per item. 2. Part numbers do not imply hardware/door/frame compatibility. 3. Verify all hardware applications and combinations with an appropriate hardware consultant. 4. When hardware needs to be applied to both door and frame, the hardware will typically be applied to and shipped with the door. LOCKING DEADLOCK ON SINGLE DOOR PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A9 $ FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA DEADLOCK ON PAIR OF DOORS COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A FABRICATION FOR DOOR DPA FABRICATION FOR FRAME N/A HARDWARE APPLICATION HAA DEADLOCK WITH 3-POINT LOCK COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA CYLINDER GUARD COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A FABRICATION FOR DOOR DPA FABRICATION FOR FRAME N/A HARDWARE APPLICATION HAA ARMORED STRIKE ON SINGLE DOOR (DOES NOT INCLUDE APPROPRIATE DEADLOCK PREP) COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A FABRICATION FOR DOOR N/A FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA9 9.00
23 EFFECTIVE FEBRUARY 1, 2018 LOCKING HARDWARE A9/23 1. All prices are per item. 2. Part numbers do not imply hardware/door/frame compatibility. 3. Verify all hardware applications and combinations with an appropriate hardware consultant. 4. When hardware needs to be applied to both door and frame, the hardware will typically be applied to and shipped with the door. LATCH LOCKS MS LATCH LOCK ON SINGLE DOOR PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A9 $ FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA LATCH LOCK ON SINGLE DOOR (LEVER OR PADDLE) COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA
24 A9/24 LOCKING HARDWARE EFFECTIVE FEBRUARY 1, All prices are per item. 2. Part numbers do not imply hardware/door/frame compatibility. 3. Verify all hardware applications and combinations with an appropriate hardware consultant. 4. When hardware needs to be applied to both door and frame, the hardware will typically be applied to and shipped with the door. MISCELLANEOUS LOCKS MS 1870 CYLINDER OPERATED FLUSH BOLT PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A9 $ FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA MS 1880 TWO POINT LOCK COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA BOTTOM RAIL LOCK COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA CYLINDRICAL LOCKS CYLINDRICAL LOCK SET ON SINGLE DOOR (BORED OR MORTISE) PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A9 $ FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA
25 EFFECTIVE FEBRUARY 1, 2018 EXIT DEVICE HARDWARE A9/25 1. All prices are per item. 2. Prices do not include exit device trim prep. Pick up appropriate exit device trim prep. 3. Part numbers do not imply hardware/door/frame compatibility. 4. Verify all hardware applications and combinations with an appropriate hardware consultant. 5. When hardware needs to be applied to both door and frame, the hardware will typically be applied to and shipped with the door. CONCEALED EXIT DEVICE FALCON CONCEALED ROD EXIT DEVICE PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A9 $ FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA VON DUPRIN CONCEALED ROD EXIT DEVICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA ALL OTHER CONCEALED ROD EXIT DEVICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA RIM EXIT DEVICE ALL RIM EXIT DEVICES PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A9 $ FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA MORTISE EXIT DEVICE ALL MORTISE EXIT DEVICES PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A9 $ FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA SURFACE ROD EXIT DEVICES ALL SURFACE ROD EXIT DEVICES PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A9 $ FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA
26 A9/26 EXIT DEVICE HARDWARE EFFECTIVE FEBRUARY 1, All prices are per item. 2. Prices do not include exit device. Pick up appropriate exit device trim prep. 3. Part numbers do not imply hardware/door/frame compatibility. 4. Verify all hardware applications and combinations with an appropriate hardware consultant. 5. When hardware needs to be applied to both door and frame, the hardware will typically be applied to and shipped with the door. EXIT DEVICE TRIMS FALCON EXIT DEVICE TRIMS PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A9 $51.00 FABRICATION FOR DOOR DPA FABRICATION FOR FRAME N/A --- HARDWARE APPLICATION HAA VON DUPRIN EXIT DEVICE TRIMS COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A FABRICATION FOR DOOR DPA FABRICATION FOR FRAME N/A --- HARDWARE APPLICATION HAA ADAMS RITE EXIT DEVICE TRIMS COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A FABRICATION FOR DOOR DPA FABRICATION FOR FRAME N/A --- HARDWARE APPLICATION HAA
27 EFFECTIVE FEBRUARY 1, 2018 CLOSERS AND DOOR HOLDERS A9/27 1. All prices are per item. 2. Part numbers do not imply hardware/door/frame compatibility. 3. Verify all hardware applications and combinations with an appropriate hardware consultant. 4. When hardware needs to be applied to both door and frame, the hardware will typically be applied to and shipped with the door. CONCEALED OVERHEAD CLOSERS (DOES NOT INCLUDE HINGING PREP, MAY REQUIRE A SPECIAL TOP RAIL AND AFFECT GLASS) SINGLE ACTING ARM PREP PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A9 $ FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA SINGLE ACTING CLOSER PREP COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A FABRICATION FOR DOOR N/A FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA FLOOR CLOSERS (DOES NOT INCLUDE HINGING PREP) OFFSET PIVOT CLOSER ARM FABRICATION PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A9 $ FABRICATION FOR DOOR DPA FABRICATION FOR FRAME N/A --- HARDWARE APPLICATION HAA DOOR HOLDERS (MAY REQUIRE A SPECIAL TOP RAIL AND AFFECT GLASS SIZE) SURFACE HOLDER PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA
28 A9/28 MISCELLANEOUS HARDWARE EFFECTIVE FEBRUARY 1, All prices are per item. 2. Part numbers do not imply hardware/door/frame compatibility. 3. Verify all hardware applications and combinations with an appropriate hardware consultant. 4. When hardware needs to be applied to both door and frame, the hardware will typically be applied to and shipped with the door. MISCELLANEOUS HARDWARE FLUSHBOLTS (PER PAIR) PART NO. PRICE COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A9 $94.00 FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA NON-STANDARD PUSH PULL COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A FABRICATION FOR DOOR DPA FABRICATION FOR FRAME N/A HARDWARE APPLICATION HAA VON DUPRIN POWER TRANSFER COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION N/A STANDARD ELECTRIC STRIKE ON SINGLE DOOR (AR 7130 / HES 7089) COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A FABRICATION FOR DOOR N/A FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA ALL OTHER ELECTRIC STRIKES ON SINGLE DOOR COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A FABRICATION FOR DOOR N/A FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA MAGNETIC LOCK (SURFACE APPLIED - PER LEAF) COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA MAGNETIC LOCK (CONCEALED - PER LEAF) COMPLETE DOOR/FRAME FABRICATION AND APPLICATION A FABRICATION FOR DOOR DPA FABRICATION FOR FRAME FPA HARDWARE APPLICATION HAA
2000T Terrace Doors. For specific product applications, Consult your Kawneer representative. AUGUST, 2017 EC FEATURES ADMA080EN
AUGUST, 07 EC 979-000T Terrace Doors FEATURES Kawneer Company, Inc., 07 Features Performance class and grade: Single: AW-PG90-ATD Pairs: AW-PG65-ATD Outswing or inswing Door is -/" (57.) deep " x " (5.
More informationHARDWARE ms1505 SECTION Page 1
ms1505 SECTION 08 70 00 - Page 1 PART 1 GENERAL 1.01 SECTION INCLUDES A. Hardware for interior and exterior doors. B. Thresholds and weatherstripping. 1.02 RELATED REQUIREMENTS A. Section 08 11 13 - Hollow
More information33/3549A and 98/9949 Concealed Vertical Cable
33/3549A and 98/9949 Concealed Vertical Cable Door Exit Hardware Price List Effective March 5, 2012 Customer Care By Phone: 877-671-7011 - Press (1), then Press (3) By Fax: 800-999-0328 By E-Mail: order_vonduprin@irco.com
More information400 Series Tilt-Wash Insert Windows (2011 to Present)
400 Series Tilt-Wash Insert Windows (2011 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Tilt-Wash Insert Windows........................................... Page 3 Parts
More information400 Series Tilt-Wash Insert Windows (2011 to Present)
400 Series Tilt-Wash Insert Windows (2011 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Tilt-Wash Insert Windows........................................... Page 3 Parts
More informationLever Thumbturn. Base Model Description Base Price
- - Example E 3 0 6 5 M S N L 6 2 6 4 1 - E 3 0 Model Function Locking Device Key Override Build the model number with the desired options + This field may be left blank if no optional features are required
More information.75 DOOR ACCESSORIES. Concealed Screw Surface Bolts. 4" Concealed Screw Surface Bolt. 6" Concealed Screw Surface Bolt. 8" Concealed Screw Surface Bolt
Concealed Screw Surface Bolts 4" Concealed Screw Surface Bolt 8527 6" Concealed Screw Surface Bolt 8528 8" Concealed Screw Surface Bolt 8529 12" Concealed Screw Surface Bolt 8530.75 Mortise Strike Lip
More informationHardware & Accessories
Hardware & Accessories Assure that your installations and designs are completed in professional fashion by utilizing Stylmark s Hardware and Accessories. This catalog represents a collection of these items,
More information6'-8" Door Opg. Qty Part # Finish Page No. Item Description List Price Extension
Page 1 Narrow, Medium and Wide Stile Doors for Custom Hardware Application Pricing Example A 6'-8" Door Opg. 6'-0" Door Opg. Finish: Doors: Bronze (DB) 4" Medium Stile Note: See Section C3 for Custom Door
More informationLEE DAN COMMUNICATIONS, INC.
THE NAME TO KNOW IN POSTAL SPECIALTIES LEE DAN COMMUNICATIONS, INC. 55 Adams Avenue, Hauppauge NY 788-3699 YEAR AFTER YEAR, S U G G E S T E D S P E C I F I C A T I O N S OUR REPUTATION IS BASED ON PERFORMANCE
More informationLEE DAN COMMUNICATIONS, INC.
THE NAME TO KNOW IN POSTAL SPECIALTIES LEE DAN COMMUNICATIONS, INC. 155 Adams Avenue, Hauppauge NY 11788-3699 YEAR AFTER YEAR, S U G G E S T E D S P E C I F I C A T I O N S OUR REPUTATION IS BASED ON PERFORMANCE
More informationSingle action door patch fittings
Single action door patch fittings The flexible system for all installation situations. CONTENTS Technical details - 5 Materials and surface finishes Product information Patch fittings / none rebated frame
More informationLEE DAN COMMUNICATIONS, INC.
THE NAME TO KNOW IN POSTAL SPECIALTIES LEE DAN COMMUNICATIONS, INC. 155 Adams Avenue, Hauppauge NY 11788-3699 YEAR AFTER YEAR, S U G G E S T E D S P E C I F I C A T I O N S OUR REPUTATION IS BASED ON PERFORMANCE
More informationGlass. Pre-Assembled Glass Entry Doors. In Stock Models Available!
Glass Store Front Doors 1-800-486-8415 www.glassstorefrontdoors.com Pre-Assembled Glass Entry Doors Commercial Glass Store Front Doors Pre-Assembled and Ready for Quick Install In Stock Models Available!
More informationCommercial Grade * Custom & Premium "A" Grade Full Machining Capabilities. Stock Book 2014
Commercial Grade * Custom & Premium "A" Grade Full Machining Capabilities Stock Book 2014 Rev 10/2014 ASSA ABLOY Service Center is associated with AADG, Inc., an ASSA ABLOY Group company. Copyright 2018,
More information395 Main Street. Card access upgrade project
395 Main Street Card access upgrade project Door modification schedule Revision 2 The following changes are planned for the heritage program protected doors on the main floor of the Confederation Building,
More informationRolling Shutters - 3 Part Specs
Rolling Shutters - 3 Part Specs ARCHITECTURAL SPECIFICATIONS: 107100 EXTERIOR PROTECTION PART 1 GENERAL 1.01 SUMMARY 1. Section includes exterior overhead Roll-Up hurricane/typhoon shutters 1.02 SUBMITTALS
More informationDOOR SWEEP DOOR BOTTOM W/ SHIELD MAGNETIC DOOR SET DOOR SET WEATHERSTRIP WEATHER STRIP PUSH STYLE THRESHOLD INSERT. Page 1 WD 9110 WD 9105
C A U D I L L S U P P L Y I N C. Page 1 DOOR SWEEP DOOR BOTTOM W/ SHIELD WD 9105 WD 9110 DOOR SET WEATHERSTRIP MAGNETIC DOOR SET WD 9111 WD 9112 WEATHER STRIP PUSH STYLE THRESHOLD WD 9113 WD 9114 Bronze
More informationTechnical Support 1 1 Support services 1 1 Telephone technical support 1 1 Training seminars 1 1
CREDITS/COPYRIGHT 1996 99, 2002 Best Lock Corporation, dba Best Access Systems. All rights reserved. Printed in the United States of America. Information in this document is subject to change without notice
More informationTHIS FORM IS THE PURCHASE ORDER. DO NOT SEND A COVER P.O. DUPLICATED ORDERS CANNOT BE RETURNED. Technology/Description
Electrified Exit Devices ORDER NO. Cylinder Options: KD Keyed Different 60 Disposable Construction Core 70 Interchangeable Core Disposable Plug C ess Cylinder Ordering Form: Electrified 80 Series Surface
More informationTechnical Data Sheet Excel 741
Technical Data Sheet Excel 741 Excel 700 Series Features & Options Standard Features Manually-operated individual-panel movable partition STC 43, 48, 50, or 54 Steel faces laminated to gypsum board 102
More informationDL1200 Series. DL1200/26D1 Lever Set 4 DL1250/26D2 Knob set 4 26D
DL1200 Series Trilogy Narrow Stile Aluminum door retrofit trim. Works with Adams Rite 1850, 1950, 4710, & 4900 spring latch 100 user codes, master, management, basic user and 3 one-time service codes.
More information. PHONE. Local: +1 (718) Toll Free: +1 (888)
S E A L I N G S Y S T E M S F O R D O O R S BOOK #19 CONTACT US Visit our website for all cut sheet and installation instruction downloads, product updates and more! EMAIL PHONE Local: Toll Free: +1 (888)
More informationVistaLuxe Collection - Standard Sizes & Size Limitations
Kolbe & Kolbe Millwork Co., Inc. Page 1 of 7 VistaLuxe Collection - Standard Sizes & Size Limitations Crank-Out Casements (venting) Size Limitations Min Max Size : 1' 4" 1' 8" 2' 0" 2' 4" 2' 6" 2' 8" 3'
More informationWindow & Door Screens Catalog
Window & Door Screens Catalog 5/16 window screen with plungers 5/16" x 3/4" Screen Frame 5/16" Corner Plunger Assembly Plunger pin Clear - Poly mark X 5/16" window screen with springs 3/16" Corner Spring
More information83 Series Pocket Doors Locks
E XTRAORDINARY ARCHITECTURAL HARDWARE TM 83 Series Pocket Doors Locks R 83 SERIES POCKET DOOR LOCKS 83190 83191 83192 83193 83194 83195 83196 83197 Small Square Pocket Door - Complete Sets Small Square
More informationE-Plex 5000 Cylindrical
42 43 40 E-Plex 5000 Cylindrical 30 36 3 38 31 39 41 32 46 1 18 15 16 23 26 2 25 31 33 34 35 44 9 12 22 24 28 29 20 21 45 19 2 4 5 6 3 5 8 10 11 13 14 See inside front cover for How to Order instructions
More informationCAMDEN MOUNTING BOXES
DOOR ACTIVATION DEVICES ENCLOSURES AND MOUNTING BOXES CAMDEN MOUNTING BOXES FEATURES THE INDUSTRY'S LARGEST ASSORTMENT OF MOUNTING BOXES, ESCUTCHEONS, TRIM PLATES AND SLEEVES. FEATURES SOLUTIONS FOR SURFACE
More informationFENSTERTECHNIK BESTELLKATALOG WINDOW TECHNOLOGY ORDER CATALOG SECTION Tilt&Turn Hardware UNI-JET SCF WOOD
FENSTERTECHNIK BESTELLKATALOG WINDOW TECHNOLOGY ORDER CATALOG SECTION 06.3 Tilt&Turn Hardware UNI-JET SCF WOOD Table of Contents 06.3 UNI-JET SCF WOOD 06 3 DIRIGENT T&T Handle... 06.3.7 Tilt&Turn Sash...
More informationXP98/99 Rim Exit Device. STRIKE APPLICATION/MINIMUM STILE USING STANDARD TRIM Device Type Standard
XP98/99 Rim Exit Device Strike Application Information STRIKE APPLICATION/MINIMUM STILE USING STANDARD TRIM Device Type Standard Single Door Double Door Strike Stile Strike w/mullion* Stile XP98/99 909
More informationIllustration Part Description Base List Weight/ Ft./ = Stocked. Number Price/S.L. S.L. S.L. E4TB170 Screw Applied Horn $
Prices DO NOT include glazing gaskets or weathering. See Accessories sheet. 4" Back Members or Smaller for 1" Glass Page 1 Illustration Part Description Base List Weight/ Ft./ = All locations E4TB170 Screw
More informationELECTRONIC ACCESS CONTROL LOCKSETS FOR GALAXY CONTROL SYSTEMS
ELECTRONIC ACCESS CONTROL LOCKSETS FOR GALAXY CONTROL SYSTEMS SCHLAGE AD-300 NOTES TO SPECIFIER: Items in BLUE font are edit prompts and notes that should be deleted from final section. 1. Specifications
More informationMERLIN / PRIMA. Patch Fittings Merlin & Prima Series
Patch Fittings Merlin & Prima Series In the field of architectural fittings for glass doors, provides high quality and total design flexibility for ease of installation, safety, security and functionality.
More informationIllustration Part Description Base List Weight/ Ft./ Number Price/S.L. S.L. S.L. T ½" Head, Inside Glaze $ '2" (Use with E9416)
Prices DO NOT include glazing gaskets or weathering. See Accessories sheet. 4-1/2" Depth Members T9465 4 ½" Head, Inside Glaze $ 305 26.56 24'2" (Use with E9416) Page 1 E9416 Glass Stop, Inside Glaze $
More informationROLLING COUNTER SHUTTERS
500 ROLLING COUNTER SHUTTERS EXCEPTIONAL SECURITY AND AESTHETICS WAYNE DALTON COMMERCIAL DOOR SYSTEMS The Wayne Dalton Rolling Counter Shutter system provides the perfect solution for smaller openings
More informationTECHNICAL DOCUMENTATION
TECHNICAL DOCUMENTATION www.swissfineline.us Sliding patio doors System swissfineline - Frameless glazing General Description and Information swissfineline is the ultimate premium sliding door and window
More informationTECHNICAL GUIDE M LOEWEN MULTISLIDE
TECHNICAL GUIDE M LOEWEN MULTISLIDE LOEWEN MULTISLIDE LOEWEN MULTISLIDE STANDARD FEATURES Standard panel heights up to feet Standard panel widths up to 5 feet; custom sizes available Natural Douglas Fir
More informationMK Series Cylindrical Lock Rainer Security Products Ltd
MK Series Cylindrical Lock Rainer Security Products Ltd Unit B6, Rudford Industrial Estate, Ford, Arundel, West Sussex BN18 0BF +44 (0) 1903 32211 rainersecurity.co.uk sales@rainersecurity.co.uk 2 MK Series
More informationAO19. LH Push RH Push LH Pull RH Pull. Double Door (Twin) Pull. Dual Egress Door LH. Dual Egress Door RH. 52 Pull Max reveal on a pull 2.
AO9 DETEX CORPORATION Automatic Operator Select from list below and fax to 800-653-3839 NOTE: Operator always mounted inside of building Viewed from mounting side of door Single Door 39.5 Right Hand Push
More informationELECTRONIC ACCESS CONTROL LOCKSETS SCHLAGE AD-300
ELECTRONIC ACCESS CONTROL LOCKSETS SCHLAGE AD-300 NOTES TO SPECIFIER: Items in BLUE font are edit prompts and notes that should be deleted from final section. 1. Specifications are for electronic access
More informationSwing Door Hardware. Swing Door Hardware Pages
Swing Door Hardware Swing Door Hardware Pages Multipoint Door Lock Overview E-2 Unitop Multipoint Systems E-3 to E-7 Poseidon Unitop Systems E-8 to E-9 Sicurtop Multipoint Systems E-10 to E-13 Poseidon
More informationCAMDEN MOUNTING BOXES
DOOR ACTIVATION DEVICES ENCLOSURES AND MOUNTING BOXES CAMDEN MOUNTING BOXES FEATURES THE INDUSTRY'S LARGEST ASSORTMENT OF MOUNTING BOXES, ESCUTCHEONS, TRIM PLATES AND SLEEVES. FEATURES SOLUTIONS FOR SURFACE
More informationproduct catalog &pricing guide
product catalog &pricing guide PRICES EFFECTIVE JULY 2017 Phone: (334) 264-6158 Fax: (334) 264-6001 Visit us on the web: www.southernshutter.com E-mail: sales@southernshutter.com Terms Conditions / Warranty
More informationB600/700/800 Series. The B600/700/800 Series are Schlage s highest grade deadbolt
B600/700/800 Series The B600/700/800 Series are s highest grade deadbolt locks. Choose the 600 for Grade 1 security in high-traffic commercial applications. Choose the 700 or 800 and get standard a Primus
More informationWhat do you want to build today?
RELIABLE. RESPONSIVE. RELIABLE. RESPONSIVE. RELIABLE. RESPONSIVE. RELIABLE. RESPONSIVE. RELIABLE. RESPONSIVE. What do you want to build today? T - S L O T T E D A L U M I N U M E X T R U S I O N S V.3
More informationPadlocks & Deadlocks. PL5000, DL2200/DL3200, DL3000 & DL4100 Series
PL5000, DL2200/DL3200, DL3000 & DL4100 Padlocks PL5000 Rekeyable Fixed Core (RFC) and Interchangeable Core (IC) Models RFC IC Model RFC IC Features PL5000R PL5100R PL5200R PL5070 PL5170 PL5270 Case Extruded
More informationNOVEMBER 2017 MULTI-FAMILY HOUSING SOLUTIONS CONVENIENT SECURITY
NOVEMBER 2017 MULTI-FAMILY HOUSING SOLUTIONS CONVENIENT SECURITY RETROLOCK ACCESS CONTROL SYSTEMS RACS SYSTEM RETROLOCK CLOUD OR SERVER PHONE APP INTERCOM SYSTEM CCTV NVR WORK STATION ELEVATORS PARKING
More informationB600/700/800-Series. Pictured here: B600 (Grade 1) deadbolt with D-Series Orbit knob shown in 626 Satin Chrome
B600/700/800-Series The B600/700/800-Series are Schlage s highest grade deadbolt locks. Choose the 600 for Grade 1 security in high-traffic commercial applications. Choose the 700 or 800 and get standard
More informationProduct Catalog 2018
Product Catalog 2018 MODERN & CLASSIC DESIGN Modern design with straight lines became very popular in the last few years. Because of symmetrical shape same handle can be installed on left or right facing
More information2010 Replacement Parts List For Swing Doors
2010 Replacement Parts List For Swing Doors Please use the present parts list to locate R-Plus Doors parts available for sale. When ordering, please provide product Job Number or Serial Number if available.
More informationBuildingEnvelope Oldcastle ( ) -
BuildingEnvelope 1-866-Oldcastle (653-2278) - www.obe.com RELIANCE CASSETTE 2-1/2" X 10-7/8" / SHEAR BLOCK ASSEMBLY / STRUCTURAL SILICONE GLAZED Elev-Rcs-SB-Silicone-2.5x10.875 H1241-Head H1242-Horizontal
More informationShutter Design. Standard Shutters
Shutter Design Revised: DEC. 2017 Standard Shutters Sunland Shutters builds all panels so that the top rail and the bottom rail are as close to the same size as possible. When ordering adjacent shutters
More information4C Standard Horizontal Mailboxes
4C Standard Horizontal Mailboxes Note: 3700 series 4C standard horizontal mailboxes and parcel lockers have been U.S.P. S. approved and meet the specifications of USPS-STD-4C. These units are required
More informationEASY TO INSTALL, EASY TO MAINTAIN
5000 Series The Simplex and E-Plex 5000 Series is the complete toolkit for all your access control needs. Built on five decades of reliable and convenient keyless entry, this Series provides everything
More informationR O B B I N S A R C H I T E C T U R E, P. A W i l l a r d D a i r y R o a d S u i t e H i g h P o i n t, N C
R O B B I N S A R C H I T E C T U R E, P. A. 2 6 4 0 W i l l a r d D a i r y R o a d S u i t e 1 2 2 H i g h P o i n t, N C 2 7 2 6 5 Gary R. Robbins, AIA ADDENDUM NUMBER 1 TODAY S DATE: May 22, 2017 ARCHITECT
More informationRACKS AND CABLE MANAGEMENT
F/ F/ Assemblies, 11.0 W W W. S I E M O N. C O M SECTION CONTENTS RS3 Rack System........ 11.2 11.3 RS3 Series Horizontal Managers........... 11.3 F/ RS Rack System............................. 11.4 Extended
More informationTopConsole system TP. Combination options 1-part 2-part 3-part. System accessories Page 537 Monitors, keyboards From page 796 Climate control Page 389
opconsole system P System accessories Page 537 Monitors, keyboards From page 796 Climate control Page 389 Enclosure: Sheet steel 1.5 mm Door and console cover: Sheet steel, 2.0 mm, all-round foamed-in
More information1700 SERIES WINDOW COLLECTION
ALSIDE NEW CONSTRUCTION 1700 SERIES WINDOW COLLECTION SIZE GUIDE TABLE OF CONTENTS 3 Specifications 4 Quick Spec Guide 5 Single-Hung Model 1700 14 Twin Single-Hung Model 1720 22 Triple Single-Hung Model
More informationBuildingEnvelope Oldcastle ( ) -
BuildingEnvelope 1-866-Oldcastle (653-2278) - www.obe.com RELIANCE CASSETTE 2-1/2" X 6-3/4" / SCREW SPLINE ASSEMBLY / STRUCTURAL SILICONE GLAZED Elev-Rcs-SS-Silicone-2.5x6.75 H1401-Head H1402-Horizontal
More informationHorizontal folding shutter system - Slides in top track No bottom track required - Great for curves. Versatile Unobtrusive
Horizontal folding shutter system - Slides in top track No bottom track required - Great for curves User friendly Easy to maintain Versatile Unobtrusive Spans wide openings Elegant Security solutions for:
More informationJUNE 2018 MULTI-FAMILY HOUSING SOLUTIONS CONVENIENT SECURITY
JUNE 2018 MULTI-FAMILY HOUSING SOLUTIONS CONVENIENT SECURITY INTRODUCTION When your residents move-in to your property you want them to feel at home. Their key fob or phone should operate every door, elevator,
More informationBuildingEnvelope Oldcastle ( ) -
BuildingEnvelope 1-866-Oldcastle (653-2278) - www.obe.com RELIANCE CASSETTE 2-1/2" X 10-7/8" / SHEAR BLOCK ASSEMBLY / 3M VHB TAPE GLAZED Elev-Rcs-SB-VHB-2.5x10.875 H1141-Head H1142-Horizontal H1143-Sill
More information400 Series Woodwright Picture and Transom Windows (2002 to Present)
400 Series Woodwright Picture and Transom Windows (2002 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Picture & Transom Windows........................................ Page
More informationCentre, Left or Right Yes. * Yes - constructed from Basswood * Yes - constructed from Basswood
ISSUE: SH-16-0037 Introduction Window treatments traditional European styled are the perfect interior window management system. look like our Basswood shutters but offer a longer life span and more affordable
More informationSECTION A. Tempered Glass Free Standing Swing Gate Post Assemblies.
Page 1 of 5 SECTION 05 7310 CRL-BLUMCRAFT FREE STANDING GLASS SWING GATE POST SYSTEMS PART 1 GENERAL 1.1 SECTION INCLUDES A. Tempered Glass Free Standing Swing Gate Post Assemblies. 1.2 RELATED SECTIONS
More informationor
Infinite possibilities for your data center The F-Series TeraFrame T M Cabinet System The F-Series TeraFrame Cabinet System from Chatsworth Products, Inc. (CPI) provides configurable thermal management
More informationFeatures and Benefits
Features and Benefits Polycore shutter are the only fully aluminum reinforced shutters available in the world today. After nearly 12 years of research and development, a co-extrusion process was perfected
More informationHP STD 33" Cut (S/N ) Page 1 of 15 Drive Assembly
34356 8HP STD 33" Cut (S/N 343561100101-343561199999) Page 1 of 15 Drive Assembly 34356 8HP STD 33" Cut (S/N 343561100101-343561199999) Page 2 of 15 Drive Assembly 1 1 Engine, 8 HP, Recoil Start Order
More informationSeries 75. Steel Roller Shutters
Roller Shutters consist of individual interlocking steel slats, providing high strength security for commercial and industrial applications such as factories, loading docks, workshops and warehouses. FEATURES
More informationELECTRONIC ACCESS CONTROL LOCKSET IN WinDSX SYSTEM SCHLAGE AD-400
ELECTRONIC ACCESS CONTROL LOCKSET IN WinDSX SYSTEM SCHLAGE AD-400 NOTES TO SPECIFIER: Items in BLUE font are edit prompts and notes that should be deleted from final section. 1. Specifications are for
More informationStainless Steel Hatch Fasteners Page
Izerwaren numbers Stainless Steel Hatch Fasteners Page -4-3-0-0 hatch fasteners, flush type with separate key sea water resistant - leak proof finish: rolled Installation: Drill hole: 22.5 mm Ø / 7/8 Back
More informationSearch our Entire Inventory at Call for your password today.
Section 4 HARDWARE USA & CANADA: ONLINE: INTERNATIONAL: 800-332-2500 Phone www.allpointsfps.com +1-860-738-7112 Phone 800-227-1511 Fax custserv@allpointsfps.com +1-860-201-1119 Fax Online at: www.allpointsfps.com
More informationPanel Enclosures. Wall-Mount Enclosures Type 12 Premier Series Double-Door with Quarter-Turn Latches Data Sheet
Panel Enclosures Wall-Mount Enclosures Type 12 Premier Series Double-Door with Quarter-Turn Latches Data Sheet Construction Enclosure and door are fabricated from code gauge steel (see page 153) All continuous
More informationKNOBSETS. An ASSA ABLOY Group brand ASSA ABLOY
KNOBSETS An ASSA ABLOY Group brand ASSA ABLOY Knobsets Styling Classic U969 Range Tulip U965 Range Guarantee UNION is the manufacturer of high quality security products. UNION products are guaranteed from
More informationSummer/Spring 2018 Oceana and Taiga Suites
portals Summer/Spring 2018 Oceana and Taiga Suites portals We would like to introduce you to the two newest Suites in the Portals product line, Oceana and Taiga. These classic designs have been available
More information4C Std Horizontal Mailboxes - cont. on pgs 14-19
4C Std Horizontal Mailboxes - cont. on pgs 14-19 4C STANDARD HORIZONTAL MAILBOXES FRONT OR REAR LOADING #3716D-20 maximum height 4C standard horizontal mailboxes in aluminum finish with custom engraved
More informationSYSTEM WORLD PRODUCT INFO
SYSTEM WORLD PRODUCT INFO August 208 System case.. System Case Configuration.. Width x depth x height (inches).56 x 0.62 x 3.3 inches Number of System Boxes Material Lid Type Art. No. Empty* ABS Black
More informationEND PANELS WIRE GRID END PANELS. Used on ends of Wall or Island sections End Panel hooks are reversible for left hand and right hand applications
END SOLUTIONS 133 END PANELS Used on ends of Wall or Island sections End Panel hooks are reversible for left hand and right hand applications Example Part # : EP 48 22 06 LAX 1. End Panel: EP 2. Uprite
More informationLow "E" Insulating Glass. Authentic Divided Light. Modular Replacement Sash. Crafting Products that Fit Northeast Lifestyles Since 1890
Low "E" Insulating Glass Authentic Divided Light Modular Replacement Sash Crafting Products that Fit Northeast Lifestyles Since 1890 Turn Your Dreams into Reality with BROSCO Window Units. Windows that
More informationSection A5. Standard Telephone Entry Systems. This Price Schedule is effective April 1, Date Page Comment
April 2015 PRICE SCHEDULE A 2.0 Section A5 This Price Schedule is effective April 1, 2015. Date Page Comment 4-1-15 All April, 2015 Price Schedule update. Prices and specifications subject to change without
More informationUltraloq UL3 Series Fingerprint and Touchscreen Smart Lock
Ultraloq UL3 Series Fingerprint and Touchscreen Smart Lock Installation Instructions ( V1.4 ) Welcome Installation Video Please watch our easy step by step installation video before attempting to install
More informationWIRE AND CABLE MANAGEMENT
Wire and Cable Management Solutions A variety of items are available for managing and organizing wire and cable in common systems and cabinet environments. From cable rack, auxiliary framing to network
More informationDoor Furniture Locks Architectural Fittings Cabinetware Switches Bathroom Fittings
Door Furniture Locks Architectural Fittings Cabinetware Switches Bathroom Fittings www.tradco.com.au www.tradco.co.nz Contemporary Design Hardware Door furniture information 304 grade solid stainless steel
More informationSECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE
SECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE PART # DESCRIPTION PAGE MOUNTING KITS & TANKS 903U MOUNTING KIT WITH TANK 801-802 905U MOUNTING KIT WITHOUT TANK 803-804 902U MOUNTING KIT - CRADLE, BLOCKS &
More informationINDEX INTRODUCTION. Introduction. Index. Mechanical Digital. Electronic Keypads. Card Access. Door Entry. Electric Locking. Accessories Accessories
INDEX INTRODUCTION Index Introduction Mechanical Digital Electronic Keypads Card Access Audio & Video Door Entry Electric Locking Accessories Accessories Intruder Alarms CCTV CCTV Fire & Deterrent Technical
More informationSYKON. The joints are described with two letter. Specifically: PE = Press Corner Joint. TV = T-Joint EW = Corner Joint VE = Adjustable Corner Joint
The catalogue is subdivided, in order to be simply to use, in product groups. Each group contains profile, accessories and furnitures. The mentioned system profiles are extruded according DIN 17615 and
More informationEffective Oct. 15, Electronic Lock Price Book
Effective Oct. 15, 2016 Electronic Lock Price Book General Terms and Conditions of Sa le 1. ENTIRE AGREEMENT: This Agreement constitutes the entire agreement between KABA ILCO Corp. dba Kaba Access Control
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS 19 20 21 01 07 22 23 13 10 12 08 17 18 11 02 14 15 04 03 16 WELCOME PARTS LIST Thank you for purchasing this HealthPoint Technology Cabinet from Humanscale! Before you begin installing
More information3630P Encl 34X28 Enclosure Panel. Features. Material, Color, and Finish. Dimensions and Weight. Descriptions
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 3630P Encl 34X28 Enclosure Panel Cooper B-Line/Cable Tray Manufacturer Weight per unit Product Category Features Material
More informationSeries 417 LouvreMASTER Sun Control Shutters
Series 417 LouvreMASTER Sun Control Shutters ARCHITECTURAL SERIES Photo courtesy of Manly Windows DATE: MAY 2013 REPLACES: MARCH 2008 ARCHITECTURAL SERIES Series 417 KEY FEATURES/PERFORMANCE CHARACTERISTICS
More informationINSTALLATION GUIDE. Timberlane, Inc. 150 Domorah Drive, Montgomeryville, PA Timberlane.com
INSTALLATION GUIDE Timberlane, Inc. 150 Domorah Drive, Montgomeryville, PA 18936 800-250-2221 Timberlane.com WELCOME Thank you for choosing Timberlane. This guide provides clear, step-by-step instructions
More informationSeries 575. Vertical Flow Modular Softwall Cleanroom. Series 575 Vertical Flow Modular Softwall Cleanroom
Series 575 Vertical Flow Modular Softwall Cleanroom S O L U T I O N S The Series 575 softwall cleanroom is a cost-effective method of providing quality particulate control in a softwalled enclosure. The
More informationPixus Technologies Catalog
The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com S: 96.524.8242 CAN: 59.885.5775 Product Diversity
More informationeforce Keyless Entry Owner s Manual & Installation Instructions For Models 3090C & 3090P
eforce Keyless Entry Owner s Manual & Installation Instructions For Models 3090C & 3090P Adams Rite Manufacturing Co. 260 Santa Fe Street Pomona, CA 91767 Phone: 800-872-3267 Fax: 800-232-7329 www.adamsrite.com
More informationIRONRIDGE PRODUCT CATALOG
IRONRIDGE PRODUCT CATALOG Effective March 15, 2011 Product Catalog March 15, 2011 2 What s New: 1. New Products: a. End Caps for XRS and XRL Rails Page 6 b. End Clamps I, J, K, Page 7 and updated sizing
More informationAluminum Mailboxes - Standard System
Aluminum Mailboxes - Standard System continued on pages 36-39 2200 SERIES STANDARD SYSTEM DOOR SIZES 3-1/2'' #1 #2 #3 STANDARD SYSTEM REAR LOADING Salsbury 2200 series standard system aluminum mailboxes
More informationPyramid. Cylinder & Key Control Products
Copyright 2007, 2009, 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing
More informationProtecting All That Matters. www.assurawindows.com www.assurawindows.com Florida s newest window and door company that has been in business for over 0 years. Assura offers an extensive line of impact and
More informationKEYLESS ENTRY WITH HOME CONNECT TECHNOLOGY
KEYLESS ENTRY WITH HOME CONNECT TECHNOLOGY Baldwin brings home automation to the front door with the addition of Home Connect technology. This fully automated motorized deadbolt secures your home with
More information2002-A PARTS CENTER CATALOG
2002-A PARTS CENTER CATALOG Click on button to go directly to 2007 Pricing Guide PARTS CENTER CATALOG ~ CHAPTER GUIDE Chapter #1 General Instructions This chapter includes instructions on how to use the
More information