Indoor Class 2 LED Driver

Size: px

Start display at page:

Download "Indoor Class 2 LED Driver"

Randell Bryant
5 years ago
Views:

1 Indoor Class 2 LED Driver Phase Cut Dimming 20W SKU Description: 20W SKU: 0.3A~ 0.55A Phase Cut dimming Phase Cut Dimmable/Programmable Class 2 PSU Input Voltage: 120Vac +/-10% (UL) Input Frequency: 60Hz Compliant with Material Restrictions of RoHs Output Power (W) Output Current (A) Output Voltage (V) Max Input Current (A) Full load without dimmer PF@ Full load without dimmer Ring Wave A (UL) <20% >0.9 3KV/12ohm Combinatio n 2KV/2 ohm pass, 6KV/2ohm fail to safe Inrush Current (A/mS) See page below Weight (lbs/g) 1.21lbs / 550g Dimming Function Dimming Method Isolation Dimming Range (%) Current source Phase Cut dimming UL Class 2 100% - 5% Don t need Wiring Diagram: See label below Product Features Physical Unit must be installed in compliance with the applicable requirements of the endproduct standard for enclosure, mounting, spacing, casualty and segregation. Enclosure wiring must be rated to 600V & 105 C or higher. Performance The unit is classified as UL Class 2 as stipulated in UL1310. Program circuitry is classified as UL Class 2 as stipulated in UL1310. Minimum ambient operating temperature: -30 C. Maximum allowable casing temperature: 85 C

2 Audible noise free. For reliability and failure rate information, contact CTC LED Driver Team. The unit is UL certified for operation in dry/damp locations. The unit is tolerant of extended open circuit and short circuit conditions. The unit is compliant to FCC Title 47 Part 15 Class A. The unit is resistant to surges as per ANSI C and IEC UL Conditions of Acceptability E The unit has been examined to comply with UL Class 2 Output Criteria The unit is only to be used in dry or damp locations The metal casing must be connected to EARTH. The Program circuits must remain isolated from one another to be considered UL class 2 circuits in the end use. Product Label

3 Technical Information Output Voltage/Current Range (25V-40V, 0.3A 0.55A) Note1: The operating window just shows the driver can work in this area without abnormal functionality. Note2: For different fixtures with different output voltage, EMI should be retested by each fixture. Note3: For different fixture with different output voltage, the compatibility phase cut dimmer list should be retested by each fixture. Phase Cut Dimmer List Condition : 36V LED output-for other fixtures with different LED output voltage, need to retest and update the list Dimmer List for 20W_300mA Phase Dimming Program 120V/60HZ No. Brand Feature Comments Results 1 Lutron (C32) LW OK 2 Lutron (C40) IW OK 3 Lutron (C40) IW OK

4 4 Lutron (011) IPI06-1LZ OK 5 Lutron NT-600-WH OK 6 Lutron V-600-WH OK 7 Lutron (002) PLW OK 8 Lutron MA-600-WH Flicker 9 Lutron DVCL-153P-WH Flicker 10 Lutron AY-600PNL-WH OK 11 Lutron D-600P-WH OK 12 Lutron CTCL-153P-WH Flicker 13 Lutron MRF2-6ND-120-WH OK 14 Leviton S-600P-WH OK 15 Lutron DV-600P-WH OK 16 Lutron DVF-103P-WH Flicker Dimmer List for 20W_550mA Phase Dimming Program 120V/60HZ No. Brand Feature Comments Results 1 Lutron (C32) LW OK 2 Lutron (C40) IW OK 3 Lutron (C40) IW OK 4 Lutron (011) IPI06-1LZ OK 5 Lutron NT-600-WH OK 6 Lutron V-600-WH OK 7 Lutron (002) PLW OK 8 Lutron MA-600-WH Flicker 9 Lutron DVCL-153P-WH Flicker 10 Lutron D-600P-WH OK 11 Lutron AY-600PNL-WH OK 12 Lutron CTCL-153P-WH Flicker 13 Lutron MRF2-6ND-120-WH Flicker 14 Leviton S-600P-WH OK 15 Lutron DV-600P-WH OK 16 Lutron DVF-103P-WH OK

5 Technical Information Lifetime Expectation Power Factor & Total Harmonics Distortion Power Efficiency

6 Technical Information Input Inrush Current Leakage Current Input Voltage [Vrms] Input Inrush Current Peak Current Pulse [Apk] Pulse Duration (50% of Peak) [us] 120V Input Voltage [Vrms] 120V Input Ground Leakage Current Leakage Current (ma) 0.11 Product Dimensions Current Programming Interface Firstly set the Max Current to 550mA and the Min Current to 300mA in the input box, then put the value to be programmed (between 300mA to 550mA) into the input box for Current to Program, finally click the Send button to complete the programming of driver.

XI040C110V054BPT1 Brand Name XITANIUM XITANIUM 40W A 54V 0-10V w/t

XI040C110V054BPT1 Brand Name XITANIUM XITANIUM 40W A 54V 0-10V w/t Product Overview Input Voltage (Vac) Output Power (W) Output Voltage Range (V) Output (A) Efficiency@ Max Load and 70 C Case Max Case Temp. ( C) Input (Arms) Max. Input Power (W) Inrush (Apk/50%-µs) THD