LED SOLUTIONS + RETROFITS

Transcription

1 LED SOLUTIONS + RETROFITS 6333 Etzel Avenue St. Louis, MO Phone Toll Free Fax info@interglobal-inc.com

2 6.060".375" 6.060" EOS LED RETROFIT KITS RESI 6.400" UL 1598 Classified Retrofit Kit AC Driver-On-Board Technology Data Per NVLAP Accredited Laboratory.648" 3.030" install video.375" 13W, 14W & 23W Models Optical grade polycarbonate lens 6.060" Integrated powdercoated 14W & 23W aluminum Tc Point: heat Inside sink with Lens ground Cover wire Below 80 c On board line surge protection 13W Tc Point: Inside Lens Cover Below 80 c.400" Standard mounting options for easy install with optional hardware Optional MOV ground surge protection OPTIONAL 12" 18 AWG HARDWARE Leads PART # UL 1598 Classified Full specifications available on cut sheets EOS Retrofit Kits available in component form. Contact Inter-Global for more information. POWER 80CRI 13W EOS RETROFIT 910lm, 3000K = 70lm/W 1000lm, 4000K = 76lm/W 14W EOS RETROFIT 1350lm, 3000K = 96lm/W 1400lm, 4000K = 100lm/W 23W EOS RETROFIT 1850lm, 3000K = 80lm/W 1900lm, 4000K = 82lm/W 90CRI models special order 6.060".648" 3.030" 14W & 23W Tc Point: Inside Lens Cover Below 80 c 13W Tc Point: Inside Lens Cover Below 80 c OPTIONAL HARDWARE PART # Hardware Includes 4ea X 1/2" Screws & 8ea. Nuts w/lock SL08-AC120R-W-M807PL SL12-AC120R-W-M807PL SL18-AC120R-W-M807PL 13W, 910LM, 3000K 14W, 1350LM, 3000K 23W, 1850LM, 3000K SL08-AC120R-C-M807PL SL12-AC120R-C-M807PL SL18-AC120R-C-M807PL 13W, 1000LM, 4000K 14W, 1400LM, 4000K 23W, 1900LM, 4000K SL08 - AC120R - W - M807PL - M SL08 13W SL12 14W SL18 23W AC120R INPUT VOLTAGE W 3OOOK M807PL HEAT SINK # OPTIONAL M MOV SURGE PROTECTION 84

3 8.125" 4.063" 8.125" EOS LED.375" RETROFIT KITS.648" RESI 8 UL 1598 Classified Retrofit Kit AC Driver-On-Board Technology Data Per NVLAP Accredited.400" Laboratory install video 13W, 14W & 23W Models Optical grade polycarbonate lens Standard mounting options for easy install with optional hardware Integrated powdercoated aluminum heat sink with ground wire 14W & 23W On Tc board Point: line Inside surge protection Lens Cover Below 80 c 13W Optional Tc Point: MOV Inside ground Lens surge Cover protection Below 80 c 12" 18 AWG Leads UL 1598 Classified Full specifications available on cut sheets EOS Retrofit Kits available in component form. Contact Inter-Global for more information ".375" POWER 80CRI 13W EOS RETROFIT 910lm, 3000K = 70lm/W 1000lm, 4000K = 76lm/W 14W EOS RETROFIT 1350lm, 3000K = 96lm/W 1400lm, 4000K = 100lm/W 23W EOS RETROFIT 1850lm, 3000K = 80lm/W 1900lm, 4000K = 82lm/W 90CRI models special order 8.125" 4.063".400".648" 14W & 23W Tc Point: Inside Lens Cover Below 80 c 13W Tc Point: Inside Lens Cover Below 80 c OPTIONAL HARDWARE PART # Hardware Includes 4ea X 1/2" Screws & 8ea. Nuts w/lock SL08-AC120R-W-M804PL SL12-AC120R-W-M804PL SL18-AC120R-W-M804PL 13W, 910LM, 3000K 14W, 1350LM, 3000K 23W, 1850LM, 3000K SL08-AC120R-C-M804PL SL12-AC120R-C-M804PL SL18-AC120R-C-M804PL 13W, 1000LM, 4000K 14W, 1400LM, 4000K 23W, 1900LM, 4000K SL08 - AC120R - W - M804PL - M SL08 13W SL12 14W SL18 23W AC120R INPUT VOLTAGE W 3OOOK M804PL HEAT SINK # OPTIONAL M MOV SURGE PROTECTION 85

4 DIMENSIONS EOS LED RETROFIT KITS PUCK " Center Mount for use w UL 1598 Classified Retrofit Kit AC Driver-On-Board Technology TC POINT: INSIDE LENS C Data Per NVLAP Accredited Laboratory 13W Models Optical grade polycarbonate lens Standard mounting options for easy install with optional hardware 3.5" Integrated powdercoated aluminum (89mm) heat sink with ground wire On board line surge protection Optional MOV ground surge protection 12" 18 AWG Leads UL 1598 Classified Full specifications available on cut sheets EOS Retrofit Kits available in component form. Contact Inter-Global for more information. DIMENSIONS install video OPTIONAL HARDWARE Optional Mounting Hard 2ea X 3/8" Self T POWER 80CRI 13W EOS RETROFIT 910lm, 3000K = 70lm/W 1000lm, HARDWARE 4000K = 76lm/W SOLD SEPERAT 90CRI models special order.50" Center Mount for use with 1/8" IP nipple 1.08" (27mm) 3.5" (89mm) OPTIONAL HARDWARE PART # Optional Mounting Hardware Includes 2ea X 3/8" Self Tapping Screws SL08-AC120R-W 13W, 910LM, 3000K SL08-AC120R-C 13W, 1000LM, 4000K SL08 - AC120R - W - M SL08 13W AC120R INPUT VOLTAGE W 3OOOK OPTIONAL M MOV SURGE PROTECTION 86

5 PUCK 6 EOS LED RETROFIT KITS Key Hole Slots on 2.75" & 3.56" Bolt Circle UL 1598 Classified Retrofit Kit.50" Center Mount for use with 1/8" IP nippl AC Driver-On-Board Technology Data Per NVLAP Accredited Laboratory TC POINT: INSIDE LENS COVER BELOW 14W & 23W Models 6.18" (157mm) Optical grade polycarbonate lens Standard mounting options for easy install with optional hardware POWER 80CRI OPTIONAL HARDWARE PART # 10-2 Optional 14W Mounting EOS RETROFIT Hardware Includes 2ea. #61350lm, X 3/8" 3000K Self Tapping = 96lm/W Screws Integrated powdercoated HARDWARE 1400lm, SOLD 4000K SEPERATELY = 100lm/W - SEE PAGE aluminum heat sink with ground wire 23W EOS RETROFIT On board line surge protection 1850lm, 3000K = 80lm/W Optional MOV ground surge protection 1900lm, 4000K = 82lm/W 12" 18 AWG Leads 90CRI models special order UL 1598 Classified Full specifications available on cut sheets EOS Retrofit Kits available in component form. Contact Inter-Global for more information. DIMENSIONS Key Hole Slots on 2.75" & 3.56" Bolt Circle.50" Center Mount for use with 1/8" IP nipple install video 1.32" (33mm) 6.18" (157mm) OPTIONAL HARDWARE PART # Optional Mounting Hardware Includes 2ea. #6 X 3/8" Self Tapping Screws SL12-AC120R-W SL18-AC120R-W 14W, 1350LM, 3000K 23W, 1850LM, 3000K SL12-AC120R-C SL18-AC120R-C 14W, 1400LM, 4000K 23W, 1900LM, 4000K SL12 - AC120R - W - M SL12 14W SL18 23W AC120R INPUT VOLTAGE W 3OOOK OPTIONAL M MOV SURGE PROTECTION 87

6 13W ARRAY 2.63" 67mm) EOS LED ARRAYS 1/8" Mounting Holes on 2.18 Bolt Circ AC Driver-On-Board Technology Multiple Mounting.50" Center Options Mount for use with 1/8" IP (hand tighten to avoid cracking Data Per NVLAP Accredited Laboratory 13 Watt Optical grade polycarbonate lens Multiple mounting options for easy install On board line surge protection Optional MOV ground surge protection 12" 18 AWG Leads UL file: E Certified under UL Standard 8750 OPTIONAL HARDWARE PART # 10-2 Includes 4ea. #6 X 3/8" Self Tapping Scr HARDWARE SOLD SEPERATELY - SEE PAGE POWER 80CRI 13W EOS ARRAY 1598C Retrofit 910lm, 3000K Kits, Heat = 70lm/W Sinks, & Supplemental 1000lm, Surge 4000K Protection = 76lm/WAvailabl Contact Inter-Global 90CRI models for special more order informatio 2.63" (67mm) 1/8" Mounting Holes on 2.18 Bolt Circle.50" Center Mount for use with 1/8" IP nipple (hand tighten to avoid cracking) OPTIONAL HARDWARE PART # Includes 4ea. #6 X 3/8" Self Tapping Screws 1598C Retrofit Kits, Heat Sinks, & Supplemental Surge Protection Available. Contact Inter-Global for more information.33" (8mm) IMPORTANT PRODUCT MUST BE INSTALLED WITH PROPER HEAT DISSIPATION. SEE UL TERMS OF ACCEPTABILITY ON PAGE 11 PRIOR TO INSTALLATION. HEAT SINK NOT INCLUDED L08 - AC120R - W L08 13W AC120R INPUT VOLTAGE W 3OOOK 88

7 14W ARRAY EOS LED ARRAYS Key Hole Slots on 2.75" & 3.56" Bolt Circle AC Driver-On-Board 1/8" Mounting Holes Technology on 4.46" Bolt Circle Multiple.50" Center Mount for use with 1/8" IP nipple mo Data Per NVLAP (hand Accredited tighten to avoid Laboratory cracking) OPTIONAL HARDWARE PART # Includes 4ea X 3/8" Self Tapping Screws 14 Watt 90CRI) 5.11" (130mm) 1598C Retrofit POWER Kits, OPTIONS Heat 80CRI & Optical grade polycarbonate lens Supplemental 14W Surge EOS Protection ARRAY Available. Multiple mounting options Contact Inter-Global 1350lm, for 3000K more = 96lm/W information for easy install 1400lm, 4000K = 100lm/W On board line surge protection 90CRI models special order Optional MOV ground surge protection 12" 18 AWG Leads UL file: E Certified under UL Standard " (130mm) Key Hole Slots on 2.75" & 3.56" Bolt Circle 1/8" Mounting Holes on 4.46" Bolt Circle.50" Center Mount for use with 1/8" IP nipple mount (hand tighten to avoid cracking) OPTIONAL HARDWARE PART # Includes 4ea X 3/8" Self Tapping Screws 1598C Retrofit Kits, Heat Sinks, & Supplemental Surge Protection Available. Contact Inter-Global for more information.32" (8mm) IMPORTANT PRODUCT MUST BE INSTALLED WITH PROPER HEAT DISSIPATION. SEE UL TERMS OF ACCEPTABILITY ON PAGE 11 PRIOR TO INSTALLATION. HEAT SINK NOT INCLUDED L12 - AC120R - W L12 14W AC120R INPUT VOLTAGE W 3OOOK 89

8 23W ARRAY EOS LED ARRAYS Key Hole Slots on 2.75" & 3.56" Bolt Circle AC Driver-On-Board 1/8" Mounting Holes Technology on 4.46" Bolt Circle Multiple.50" Center Mount for use with 1/8" IP nipple mo Data Per NVLAP (hand Accredited tighten to avoid Laboratory cracking) OPTIONAL HARDWARE PART # Includes 4ea X 3/8" Self Tapping Screws 23 Watt 90CRI) 5.11" (130mm) 1598C Retrofit POWER Kits, OPTIONS Heat 80CRI & Optical grade polycarbonate lens Supplemental 23W Surge EOS Protection ARRAY Available. Multiple mounting options Contact Inter-Global 1850lm, for 3000K more = 80lm/W information for easy install 1900lm, 4000K = 82lm/W On board line surge protection 90CRI models special order Optional MOV ground surge protection 12" 18 AWG Leads UL file: E Certified under UL Standard " (130mm) Key Hole Slots on 2.75" & 3.56" Bolt Circle 1/8" Mounting Holes on 4.46" Bolt Circle.50" Center Mount for use with 1/8" IP nipple mount (hand tighten to avoid cracking) OPTIONAL HARDWARE PART # Includes 4ea X 3/8" Self Tapping Screws 1598C Retrofit Kits, Heat Sinks, & Supplemental Surge Protection Available. Contact Inter-Global for more information.32" (8mm) IMPORTANT PRODUCT MUST BE INSTALLED WITH PROPER HEAT DISSIPATION. SEE UL TERMS OF ACCEPTABILITY ON PAGE 11 PRIOR TO INSTALLATION. HEAT SINK NOT INCLUDED L18 - AC120R - W L18 23W AC120R INPUT VOLTAGE W 3OOOK 90

9 LED ACCESSORIES ALUMINUM HEAT SINKS 6-32 Tapped Hole Ground Wire Included Available in White.50" M804PL M807PL EOS800HS EOS1200HS.207" 6.060".098".035" 8.125".375".035".207".203".099".375".393" 6.060".394" 8.125".203".165".27" 1.148" M807PL M804PL 6 FLAT SQUARE 8 FLAT SQUARE 6-32 Tapped Hole.50" Key Hole Slots on 2.75" & 3.56" Bolt Circle 6-32 Tapped Hole.50" 2.19" (56mm) 3.5" (89mm).75" (19mm) 6.18" (157mm) EOS800HS EOS1200HS 3.5 DIAMETER PUCK 6 DIAMETER PUCK 1" (25mm) HARDWARE /23W ARRAY Mounting Hardware 4ea X 3/8" Self Tapping Screws W ARRAY Mounting Hardware 4ea. #6 X 3/8" Self Tapping Screws PUCK 3.5 Mounting Hardware 2ea X 3/8" Self Tapping Screws PUCK 6 Mounting Hardware 2ea. #6 X 3/8" Self Tapping Screws RESI Mounting Hardware 4ea X 1/2" Screws & 8ea. Nuts w/lock 91

10 COMPONENTS MICROWAVE MOTION SENSOR MS2B Adjustable Time, Reach, & Dusk-To-Dawn Sensitivity Detects Motion Using High Frequency Mounting Bracket for Installation Installs Discretely Behind Fixture Lens VAC; 50/60Hz Operating Frequency: 5.8GHz 2.6W Power Consumption (Static State) <10mw Transmission Power Rated Load: 100VAC Incandescent 277VAC LED 277VAC Incandescent 360 Front Detection Angle 160 Side Detection Angle 39" to 26 Adjustable Detection Distance Time Delay: 8 Seconds to 12 Minutes Dusk-To-Dawn Sensitivity from Lux (2000Lux is OFF) UL CUL Listed COVERAGE 360 Photo eye Dusk to Dawn Setting Ceiling Mount 17' 26' 6.100" 2.975" Time On Setting Radius / Reach Setting 12' 6' Installed inside a ceiling mounted lighting fixture at a height of 8 (2.44m) black 300V 3ea 18AWG.400" MAX. MIN..140".815" 1.630" Wall Mount 17' MIN. 3'.605".250" 1.562".120" NOTE: Coverage pattern will vary based on installation of sensor and surrounding materials. 12' 6' MAX. 26' Installed inside a wall mounted lighting fixture at a height of 5 (1.52m) 92

11 COMPONENTS PC-08 DUSK TO DAWN SWITCH Switches Light On At NIght, Off During Day (7.9mm) Constructed of Durable Plastic Nuts & Washer Included Standard Pack Qty: (15.37mm) 120VAC; 60Hz 14 (35cm) Maximum Output: 300W Incandescent 39W LED & Fluorescent Optional Swivel Hood Eliminates Strobing ( sold seperately) Suitable for Use With Magnetic and Electronic Ballast (34.3mm) Electronic Circuit with Mechanical Switching Relay 14" Lead Length UR CUR Recognized SWIVEL HOOD Fully adjustable 2 piece cover helps to eliminate strobing caused by reflected light Fits PC-08 dusk to dawn switch (7.9mm) Available in Black (03-003) or White (03-003WHT) Standard Pack Qty: (15.37mm) WIRING DIAGRAM 14 (35cm) 1.36 (34.3mm) Rotates (14mm) (37.8mm) (18.2mm) (18mm) LED-MOV1 EOS SURGE PROTECTION Supplementary MOV Ground Surge Protector Use With EOS LED Products in Outdoor Applications Transient voltage protection: 4.0Kv (32 joules)@140vac: L-L,L-N,L-G 93

12 APPLICATION/SPECIFICATION NOTES UL Conditions of Acceptability 1. The Eos LED Light Engine may be provided with or without lead wires. In cases where lead wires are not provided, wire leads must be evaluated for proper size, operating temperature, and strain relief in final application. Wire connectors provided with the Eos LED Light Engine are rated to accept maximum 18 AWG wires. 2. The Eos LED Light Engine is provided with a polycarbonate lens that is part of the electrical enclosure. Lens must be secured to the printed circuit board in the final application. 3. Temperature must be considered in the final application. The following temperature ratings must not be exceeded: - Printed Circuit Board 130 C - Leads as marked on the insulation - Polycarbonate Lens (Enclosure) 80 C - Connectors 125 C NOTE: The Eos LED Light Engine must be properly heatsunk to thermal dissipation material. Do not mount the Eos board to insulating material such as glass, steel, plastic, or wood. 4. The Eos LED Light Engine has been evaluated for use in dry or damp locations only. The suitability of the mounting means in the end product shall be determined in the end use evaluation. 5. All Eos LED Light Engine boards are supplied with built in surge protection that provides Energy Star required transient voltage protection of 2.5Kv as outlined in ANSI/IEEE C and considered sufficient for indoor applications. For outdoor applications where products are at higher risk of surges from lightning it is recommended to use a higher level of surge protection. To accomplish this, a supplementary surge protection device is included (LED-MOV1) which aids to provide the transient voltage protection of 4.0Kv that is recommended for those applications. LED-MOV1 LED-MOV1 WIRING DIAGRAM ELECTRIC SUPPLY BOX BLACK WHITE GREEN GROUND BLACK WHITE GREEN GROUND Eos PRODUCT Application Notes 1. Maximum solder point temperature of LEDs must not exceed 100 C. 2. ENERGY STAR - Product is listed on the Energy Star Certified Component Database (CSD) under LED Light Engines. The CSD supports the Luminaire Manufacturer's qualification of their Energy Star Luminiares by providing certified performance data of the components. This streamlines the Energy Star qualification process for the luminaire when CSD listed productsare used. 3. TYPICAL MOUNTING DETAIL: Length = 1/4" + Depth of Threaded Opening Front Screw Mount Self Tapping Screw Four Required Threaded opening (not supplied) Heat Sink (not supplied) Eos Board Thermal Pad Supplied with L12-AC120R & L18-AC120R not required for L08-AC120R Back Screw Mount Heat Sink (not supplied) Through Hole Self Tapping Screw Length = 1/4" + Heat Sink Thickness Four required 4. Product must be installed with supplied optical lens to comply with UL requirements. Lens must be hand tightened to avoid cracking. 5. FLICKER - All lighting systems produce Flicker. Visibility of flicker is highly arbitrary and depends on the surrounding conditions. Visual perception of flicker is negligible at operating frequencies higher than 100Hz. Operating frequencies less than 65Hz are considered unacceptable. The Eos LED Light Engine has an operating frequency greater than 120Hz. 6. Eos boards are static sensitive. They must be handled in a manner to protect them from static discharge. 7. If additional technical assistance is needed, please contact Inter-Global at Eos PRODUCT WARRANTY (not supplied) Inter-Global warrants that its Eos product shall be free from defects in material and workmanship and will be of the designated kind and quality for a period of 5 years from the date of manufacture. Inter-Global makes no warranty whatsoever with respect to any Eos product not installed and operated in accordance with the current edition of the National Electrical Code, the standards of safety of Underwriters Laboratories, the standards of the American National Standards Institute and specific instructions provided by Inter-Global for installation and operation. If it appears within the said warranty period that any Inter-Global Eos product does not meet the warranty specified above, the customer must give written notice of their warranty claim and return the Eos product with approved Return Authorization (RGA) Number, at the customer s expense to Inter-Global. Within sixty (60) days of receipt, Inter-Global shall at its expense and option correct any defects by either repairing or replacing the defective part(s). This warranty is not applicable to any product subjected to abnormal stresses, abuse, misuse or damage resulting from acts of god. Inter-Global s Eos Products are designed to be operated in an ambient temperature range of -40C (-40F) to 40C (1 05F) The foregoing warranty is exclusive of all other statutory written or oral warranties of any kind given or herein expressed. Inter-Global hereby disclaims any implied statutory warranty or implied warranty of merchantability or fitness for a particular purpose. Under no circumstances whether as a result of breach of contract, breach of warranty, tort strict liability or otherwise, will Inter-Global or any distributor or sales representative be liable for consequential, incidental, special or exemplary damages, including but not limited to loss of profits, loss of use or damage to any property or equipment, cost of capital, cost of substitutes, products facilities or services, down time cost or claims of Inter-Global s customers. The Liability of Inter-Global or any distributor or sales representative on all claims of any kind for any loss or damage arising out of, resulting from or concerning any aspect of this limited warranty, from the Eos product furnished, shall not exceed the purchase price of the specific Eos product which gives rise to the claims. REPAIR OR REPLACEMENT FOR Eos PRODUCT UNDER WARRANTY Step 1 Contact Inter-Global within 30 days of discovery to explain the nature of the defect: BY MAIL - Inter-Global Warranties, 6333 Etzel Avenue, St. Louis, MO BY PHONE BY FAX BY - info@interglobal-inc.com Step 2 You may be instructed to send some or all of the units back for evaluation. You will be given a Return Authorization (RGA) Number. This number must appear on all cartons, packaging slips, debit memos and other correspondence. No merchandise will be accepted without a valid RGA number marking the shipment. The Eos product must be returned freight prepaid-collect SHIPMENTS WILL BE REFUSED. Step 3 The returned Eos product will be evaluated by Inter-Global to determine if it is covered under the Limited Warranty. Eos PRODUCT UNDER WARRANTY - When all of the following conditions exist, the returned Eos product will be considered under warranty and will be repaired or replaced at the option of Inter- Global. 1. The Eos product was manufactured less than the specific warranty period earlier than the date of return. 2. It is determined by Inter-Global that the Eos product was installed and operated in accordance with the current edition of the National Electrical Code, the standards for safety of Underwriter s Laboratories, Inc. the standards of the American National Standards Institute and the specific instructions provided by Inter-Global for installation and operation. 3. The Eos product does not operate according to Inter-Global specifications, due to defects in material or workmanship. 4. The Eos product manufacturing date code has not been altered or is not missing (DATE CODE - Each Eos product is marked with a date code in the form of a sticker or stamped into the case depending on the type of unit). The first two digits represent the year, and the next two digits represent the month of the year of manufacture. 5. The Eos product was not damaged due to physical abuse and was returned in adequate packaging to prevent damage to it. 6. For outdoor installations, the Eos product must be installed with optional surge supression (LED-MOV1). Eos PRODUCT NOT UNDER WARRANTY - Any Eos product determined by Inter-Global not to be under warranty will be returned to the customer (freight paid by customer), or destroyed, at the customer s option. 94

13 6333 Etzel Avenue St. Louis, MO Phone Toll Free Fax