Designer Flood LED. Floodlighting

Transcription

1 Designer Flood LED Floodlighting

2 A flood of practical design and exceptional performance The Philips Gardco Designer Flood LED combines impressive floodlighting performance and control with the efficiency and energy savings of the LED source. Based on the popular Designer Floodlight Series, this new line of architectural luminaires is specifically designed for advanced LED arrays. LEDs are significantly more sensitive and operate differently than HID systems. Simply placing LEDs into existing luminaires is almost certain to reduce LED life and adversely affect performance. The housing of the Designer Flood LED provides advanced thermal management to dissipate heat, thereby maximizing the inherent sustainability of the LED source. While the housing shape is redesigned to better suit the source, the best elements of the Designer Floodlight Series are retained, including the die cast aluminum construction, rugged mounting knuckle, integral splice box, and tamper-resistant fasteners, all protected by a textured polyester powdercoat finish, silicone seals and moisture-proof gasketing. DFC7 luminaire shown with natural aluminum paint (NP) 2

3 DFL7 luminaire shown with natural aluminum paint (NP) Whether ground, wall, ceiling or pole mounted, its timeless form is always appropriate, comfortably blending into its surroundings. It is performance, however, that distinguishes Philips Gardco and the Designer Flood LED. When used in place of HID systems, the Designer Flood LED offers energy savings of up to 50%. Six precision optical systems are available, delivering the right pattern for any application. Free from streaks and striations, these distributions place the intended target in its best light. But having the right distribution pattern is only half of the battle. Frequently, setback considerations and architectural limitations make placing the luminaire extremely challenging. With its numerous mounting options, the Designer Flood LED addresses these concerns practically and handsomely. Mounting accessories are specifically designed to complement the luminaire, and with its integral splice box, the luminaire can be mounted flush at grade. Combined with 358 horizontal and 180 vertical rotational ability, you have a precision lighting instrument that can only come from Philips Gardco. 3

4 Intelligent Construction The low-level environment is extremely severe. Vandalism, landscaping equipment and Mother Nature combine to gradually destroy everything within its grasp. And yet it is also a setting where the luminaire is most often seen, with mounting positioned nearer to the users of the site. A luminaire must be solid and durable if it is to survive in these harsh surroundings. Heavy Duty Knuckle The knuckle is the Achilles Heel of the common floodlight, where even a minor impact can break or bend the assembly. Philips Gardco s structural, die cast aluminum knuckle integrally supports the luminaire and withstands abusive treatment. Durable and practical construction features are a hallmark of all Philips Gardco products, including the Designer Flood LED. Die cast aluminum construction ensures precise mating of the luminaire components and provides for longlasting operation. Deep integral airways direct airflow around the luminaire serving to dissipate heat, crucial to long LED life. The luminaire is thoroughly sealed and gasketed at all points of entry and material transition to exclude moisture, dust, contaminants and insects. Textured polyester powdercoat finishes repel moisture, corrosives and ultraviolet rays. Every luminaire is thoroughly tested to ensure proper electrical operation. Integrated J-Box Wire splices are made in the spacious splice compartment, which is suitable for through-circuit wiring. No auxiliary junction box is required, allowing for at-grade mounting. Easily Adjustable A single hex head bolt is tightened to secure the luminaire's tilt. Incremental 5 tick marks are provided in the casting to allow for precise aiming and to facilitate the alignment of multiple luminaires. Versatile Options A full range of options is available, including Barn Doors, a Polycarbonate Shield, a Wire Guard and an Extended Splice Box that allows for additional wire throughput. 4

5 LED performance offering savings of up to 50% vs. HID The primary assessment of a sophisticated floodlight is performance. The needs are simple: provide practical distribution patterns that feature clean, unstriated illumination, allow for wide luminaire spacings and minimize brightness at normal viewing angles. The Philips Gardco Designer Flood LED accomplishes this with a total of six precision optical systems, each providing distinct visual cutoff to the LED source at normal viewing angles. The DFC7 features a cutoff hood to further control unwanted brightness. HFL Horizontal Flood The optical system of choice for providing broad even floodlighting illumination of vertical surfaces from setbacks of 8' to 15'. Typical applications include single story building facades or sign lighting with setbacks of 4' to 10'. 15 tilt 45 tilt VFL Vertical Flood This optical system achieves a taller distribution from setbacks of 8' to 15'. Multistory building floodlighting, monuments, and highlighting landscape elements are common applications. 0 tilt 0 tilt 0 tilt 45 tilt MSP Medium Spot The medium spot provides a symmetrical distribution and is designed for illuminating architecture from setbacks of 10' to 25'. These luminaires are frequently employed for illuminating churches, storefronts and historical buildings. 70 tilt NSP Narrow Spot The narrow spot distribution creates an intense and symmetrical beam, providing the opportunity to highlight from considerable setback distances of 20' to 60'. In addition, this distribution allows for wall grazing of tall facades or accent lighting of architectural elements. Flagpoles, towers and downlighting of atriums are common applications. WSP Wide Spot The wide spot provides a symmetrical distribution and is designed for illuminating architecture from typical setbacks of 8' to 20'. The wide spot optics are similar to the medium spot for illuminating churches, storefronts and historical buildings, yet provide a broader distribution pattern. 45 tilt 20 tilt 0 tilt 0 tilt 0 tilt HSP Horizontal Spot This wide yet highly concentrated beam is extremely versatile. It is appropriate for lighting facades or architectural details where setbacks of 8' to 25' are necessary. Additionally, the horizontal spot can be used for sign lighting where setbacks up to 15' are required or when higher illuminance values are desired. Patterns are shown both at 0 and at their optimal tilt. 5

6 Designer Flood LED Specifications GENERAL DESCRIPTION: The Philips Gardco Designer Flood LED is an architectural LED flood luminaire with a choice of six (6) precision LED optical systems. Each is designed to provide a specific distribution, minimizing stray light. Designer Flood LED luminaires provide performance comparable to HID units, while providing the energy saving benefits of advanced class 1 LED technology. The luminaires feature integral LED thermal fins to provide the thermal control vital to LED system performance and life. The high strength die cast aluminum knuckle features an integral splice compartment eliminating the need for a supplementary junction box and thereby permitting closer to grade mounting. HOUSING: A single-piece aluminum housing is die cast in an architectural form. A one-piece extruded gasket mates with the door frame. DOOR/LENS ASSEMBLY: A heat and impact resistant 1/8" (.318cm) tempered glass lens and one-piece silicone gasket are mechanically secured to the door frame. DFL7 luminaires feature a flat door and lens assembly. DFC7 luminaires include an integral cutoff hood door and lens assembly providing additional shielding from source brightness. IP RATING: The luminaire (excluding the knuckle and splice compartment) is rated IP66. KNUCKLE: The die cast aluminum knuckle features an integral splice compartment. A single captive 3/16" (.48cm) stainless steel allen-head bolt and stainless steel nut securely lock the knuckle aiming teeth in 5 increments. An opposite cover plate is removable for access to splices. The knuckle assembly is fully gasketed. Splice Compartment Capacity Standard Units Luminaires with Extended Splice Box (ESB) Option #12 AWG Conductors #10 AWG Conductors Including ground. OPTICAL SYSTEMS: Precision high performance LED lensed arrays are arranged to provide the specified lighting pattern, including Horizontal Flood (HFL), Vertical Flood (VFL), Horizontal Spot (HSP), Narrow Spot (NSP), Medium Spot (MSP) and Wide Spot (WSP) distributions. LED arrays are field replaceable. ELECTRICAL: Luminaires are equipped with an LED driver that accepts 120V through 277V, or 347V through 480V, 50hz to 60hz, input. Driver output is based on the LED wattage selected. Component-to-component wiring within the luminaire will carry no more than 80% of the rated current and is listed by UL for use at 600 VAC at 302 F / 150 C or higher. Plug disconnects are listed by UL for use at 600 VAC, 15A or higher. Power factor is not less than 90%. The luminaire consumes 0.0 watts in the off state. Surge protection, when provided as an option, provides protection to 10kv. LED RELIABILITY: LED THERMAL MANAGEMENT: The Philips Gardco Designer Floodlight LED provides die cast aluminum integral thermal radiation fins to provide the thermal management critical to long LED system life. FINISH: Each standard color luminaire receives a fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) textured polyester powdercoat finish. Standard colors include bronze (BRP), black (BLP), white (WP), beige (BGP), verde green (VGP) and natural aluminum (NP). Consult factory for specs on optional or custom colors. LABELS: All luminaires bear UL or CUL (where applicable) Wet Location labels. PREDICTED LUMEN DEPRECIATION DATA Ambient Temperature C 25 C 40 C LED Wattages / Driver ma WARRANTY: Philips Gardco luminaires feature a 5 year limited warranty. Philips Gardco LED luminaires with LED arrays feature a 5 year limited warranty covering the LED arrays. Polycarbonate lenses carry a 1 year warranty only. See Warranty Information on sitelighting.com for complete details and exclusions. L70 Hours 35LA / 350 ma 230,000 55LA / 530 ma 200,000 75LA / 700 ma 150,000 35LA / 350 ma 200,000 55LA / 530 ma 170,000 75LA / 700 ma 120,000 Predicted performance derived from LED manufacturer s data and engineering design estimates, based on IESNA LM-80 methodology. Actual experience may vary due to field application conditions. L70 is the predicted time when LED performance depreciates to 70% of initial lumen output. Prior to ordering, consult Submittal Data Sheet on sitelighting.com for the most current information, notes and exclusions. Philips Gardco reserves the right to change materials or modify the design of its product without notification as part of the company s continuing product improvement program. 6

7 Dimensions 16.74" cm 5.20" cm 9.87" cm 9.90" cm 13.05" cm 358 Rotation " cm DFL7 with Standard Flat Hood DFC7 with Cutoff Hood 9.50" cm C Mounting Stub-up Conduit Mount 7.00" dia cm dia. 5.00" cm 0.63" 1.60 cm 3.00" 7.62 cm ESB Option Extended Splice Box 0.63" 1.60 cm 2.50" 6.35 cm 6.90" cm 7.00" dia cm dia " cm J Mounting J-box Mount W Mounting Wall/Ceiling Canopy Mount 18.00" cm 3.54" 8.99 cm W90 Mounting Wall Arm Mount WMB Mounting Bolt Pattern WMB Mounting Wall Mount Bullhorn 36.75" cm TAB - Twin Arm Bracket * PTA - Pole Top Adaptor * ST-18" Stanchion * RSA Pole with 2 3/8" x 4" Tenon (6.03 cm x cm) (Specify Height) 24.00" cm ST Mounting w/tab Stanchion Mount with Twin Arm Bracket PTA Mounting w/tab Pole Top Mount with Twin Arm Bracket 30.13" cm 2" - 12" cm PT2 - Twin Pole Top Adaptor * RSA Pole with 2 3/8" x 4" Tenon (6.03 cm x cm) (Specify Height) 6.00" cm PTA - Pole Top Adaptor * RSA Pole with 2 3/8" x 4" Tenon (6.03 cm x cm) (Specify Height) ST-18" Stanchion * 4.00" cm PT2 Mounting Pole Top Tenon Adaptor for Twin Back-to-Back ST Mounting Stanchion Mount in Ground/Concrete PTA Mounting Pole Top Mount with Pole Top Adaptor * Order mounting accessories separately. 7

8 Example Designer Flood LED Ordering PREFIX DFL7 Standard Flat Door DFL7 Standard Luminaire DFL7-DIM with 0-10V Dimming Integral Cutoff Hood DFC7 Standard Luminaire DFC7-DIM with 0-10V Dimming MOUNTING C C J W WMB W90 ST SM DISTRIBUTION HFL HFL Horizontal Flood VFL Vertical Flood HSP Horizontal Spot NSP Narrow Spot MSP Medium Spot WSP Wide Spot LED WATTAGE 75LA 35LA 55LA 75LA LED SELECTION NW CW Cool White NW Neutral White WW Warm White VOLTAGE UNIV UNIV 120V through 277V HVU 347V through 480V PAINTED FINISH NP BRP Bronze BLP Black WP White NP Natural Aluminum BGP Beige VP Verde Green OC Optional Color SC Special Color OPTIONS F PCB BD PSO F ESB WG SPR SPRH MOUNTING C J W WMB W90 ST SM Stub-up Conduit Mount J-Box Mount. Wall/Ceiling Canopy Mount. Wall Mount Bullhorn Wall Arm Mount Stanchion Mount Surface Mount Stanchion Refer to Submittal Data Sheet on sitelighting.com for more detailed information on mounting options. OPTIONS PCB BD PSO F ESB WG SPR SPRH Button Type Photocontrol Barn Doors Offset Polycarbonate Flat Shield Fusing Extended Splice Box Wire Guard Surge Protection - 120V through 277V Input Surge Protection - 347V through 480V Input ADDITIONAL MOUNTING ACCESSORIES PTA TAB PT2 Pole top 2 3/8" (6.03cm) Tenon Adaptor Twin Arm Bracket for use with ST or PTA Pole top 2 3/8" (6.03cm) Tenon Adaptor for Twin Back to Back Luminaire Mounting Prior to ordering, consult Submittal Data Sheet on sitelighting.com for the most current information, notes and exclusions. Philips Gardco reserves the right to change materials or modify the design of its product without notification as part of the company s continuing product improvement program Clovis Barker Road San Marcos, TX / / Fax: 512/ sitelighting.com Philips Gardco Warranty Philips Gardco luminaires feature a 5 year limited warranty. Philips Gardco LED luminaires with LED arrays feature a 5 year limited warranty covering the LED arrays. Polycarbonate lenses carry a 1 year warranty only. See Warranty Information on sitelighting.com for complete details and exclusions Koninklijke Philips Electronics N.V. All Rights Reserved. Document order number: G /0511