Highlights. Altivar 32. Lexium 32. More than 150 application-specific functions. Inspired by Simplicity. Ultra slim and ultra powerful

Transcription

1 availablefrom

2

3 Highlights Altivar More than application-specific functions The Altivar range of variable speed drives controls asynchronous and synchronous motors rated from 0. to kw operating in open loop mode in complex machines: Compact, vertical and slim format ( mm) Integrated function blocks for creating simple control system functions (timers, counters, comparators, etc.) Machine safety functions integrated as standard (STO, SLS, SS) Open design: communicates with most industrial networks For more information, see page / Lexium Inspired by Simplicity The Lexium servo drive range (0. to kw) is a drive system designed for applications where high precision and dynamic positioning are critical: Suitable for packaging, materials processing (cutting, turning, milling, etc.) and handling, printing and textile applications servo drive families and two types of servo motor available Simplified engineering: motor sizing, CAD and cabinet drawings, support for PLCopen libraries and SoMove setup software Integrated Safe Torque Off function Quick integration: wide selection of fieldbus modules For more information, see page / Ultra slim and ultra powerful Practical and innovative, the Altivar and Lexium ranges can help reduce the size of your enclosures by as much as 0%. Extra slim book format Easy to configure and setup with SoMove software Packed with common software tools, accessories and functions Homogeneous mounting and wiring systems High-performance communication system Built-in Bluetooth as standard Can be configured with the power off in its original packaging: configurations can be transferred remotely via mobile phone using SoMove Mobile software /

4 Soft starters and variable speed drives Selection guide Starters - Low voltage Simple machines CApplications: Compressors, fans, pumps, conveyors, car wash gantries, etc. CApplications: Pumps, fans, turbines, compressors, conveyors, conveyor belts, lifting screws, escalators, etc. Complex machines/ Special machines CApplications: Pumps, high inertia fans and machines, compressors, conveyors, agitators, mixers, escalators, etc. Altistart 0 Altistart Altistart Soft start and Soft start/soft stop units Soft start/soft stop units Soft start/soft stop units Description Compact Simple: easy mounting, wiring and adjustment Efficient: Current peaks limitation on starting, reduction of mechanical shocks, increased service life for your machines Energy saving Innovative with its integrated Bypass contactor for motors up to kw Cost-effective Compact dimensions Quick setup Protection of motor and starter Energy saving controlled phases Torque control system: controlled torque, prevention of pressure surges and limiting of temperature rises Simple: quick setup Protection of motor and starter: thermal protection, phase loss detection, locked rotor detection Energy saving Technical information Power range for 0 0 Hz supply 0... kw kw...00 kw Voltage Single-phase 0 V 0 00 V 0 0 V 0 V 0 0 V Drive/Output frequency Motor type Asynchronous Yes Yes Yes Synchronous No No No Communication Integrated Modbus Modbus As an option Can be used with TeSys U motor starter-controller to create a complete motor starter solution DeviceNet, Fipio, PROFIBUS DP, Ethernet Standards and certifications IEC/EN 0--, C-Tick, CSA, UL, CE IEC/EN 0--, C-Tick, CSA, UL, CE, GOST, CCC, ABS Class A EMC Intended use Buildings, Simple machines. Machines, Infrastructures and Buildings IEC/EN 0--, C-Tick, CSA, UL, CE, DNV, GOST, CCC, NOM, SEPRO and TCF Classes A and B EMC /

5 Selection guide Standard drives - Low voltage Simple machines CApplications: Simple machines for industry (small handling applications, packaging, pumps, fans, etc.) Simple consumer machines (access barriers, rotating advertising hoardings, medical beds, treadmills, dough mixers, etc.) Other types of application: - Mobile machines and small appliances equipped with a power socket - Applications which traditionally use other solutions (-speed DC motors, mechanical drives, etc.). C Applications: Simple industrial machines (material handling and packaging, textile machines, special machines, pumps and fans). C Applications: Simple industrial machines (material handling and packaging, textile machines, special machines, pumps and fans). Altivar Altivar Altivar C IP Variable speed drives for small machines with 0 V three-phase asynchronous motor Variable speed drives for threephase asynchronous motors Variable speed drives for threephase asynchronous motors for machines in harsh environments. Description Technical information Power range for 0 0 Hz supply Voltage Compact Easy to set up (Plug & Play) Reliable, cost-effective solution for compact machines Open: large number of communication cards available as options User-friendly: simplified interface Autotuning: maximum performance 0... kw 0... kw 0... kw Single-phase 0 0 V 00 0 V Single-phase 00 0 V V Drive/Output frequency Hz Hz Hz Rugged even in the most hostile environments: - Installed as close as possible to the motor - Integrated functions for applications requiring IP degree of protection - Modbus and CANopen communication protocols Flexibility to adapt to each machine: - Customisable depending on the model - Easy configuration Single-phase 00 0 V 0 00 V Motor type Asynchronous Yes Yes Yes Synchronous No No No Communication Integrated Modbus Modbus and CANopen Modbus and CANopen As an option CANopen Daisy chain, DeviceNet, PROFIBUS DP, Modbus TCP, Fipio DeviceNet, Ethernet TCP/IP, Fipio, PROFIBUS DP Standards and certifications IEC/EN 0--, IEC/EN 0- (environments and, categories C to C) CE, UL, CSA, C-Tick, GOST, NOM IEC/EN 0--, IEC/EN 0- (environments and, categories C to C) CE, UL, CSA, C-Tick, GOST Intended use Machines /

6 Complex machines C Applications: Industrial machines: hoisting, packaging, material handling, special machines (woodworking machines, metal processing machinery, etc.). Complex machines/ Special machines C Applications: High performance applications: Material handling Hoisting Wood-working machines Process machinery Textile machines Packaging C Applications: High performance applications: Material handling Hoisting Wood-working machines Process machinery Textile machines Packaging Pumps and Fans C Applications: Range specifi cally for high performance pumps and fans for the industrial and building markets. C Applications: Pumping and ventilation machines in harsh environment Altivar Altivar Altivar Q Altivar Altivar Q Variable speed drives for asynchronous motors and open-loop synchronous motors Compact: "Book" format Integrated Safety function compliant to IEC SIL and PL-e Open: communication cards available as options Integrated programmable logic functions Simple setup Energy saving : Control of energy efficient permanent magnet synchronous motors For three-phase synchronous and asynchronous motors. Constant torque applications. Wide range Quick start-up and easy diagnostics: multi-language graphic display terminal Open to most industrial communication buses Integrated safety Motor control: highperformance in open-loop and closed loop mode Water-cooled variable speed drives for three-phase synchronous and asynchronous motors. Constant torque applications. Improved robustness with water cooling Efficient cooling system reduced need of air conditioning Long time operation without maintenance Excellent protection against corrosion due to stainless steel cooling pipes Very high starting torque for frequent start-up applications Variable speed drives for threephase asynchronous motors. Variable torque applications. Wide range Easy setup and diagnostics with the multi-language graphic display terminal Open to the main communication buses 0... kw kw kw kw 00 kw Single-phase 00 0 V 0 0 V Single-phase 00 0 V 00 0 V 0. Hz 0 Hz up to kw / 00 0V and 0 0V 0 00 Hz for the rest of the range V 00 0 V Single-phase 00 0 V 00 0 V 0 00 Hz 0. Hz up to kw / 00 0V and 0 0V Hz for the rest of the range Water-cooled variable speed drives for three-phase asynchronous and synchronous motors. Variable torque applications Improved robustness with water cooling Efficient cooling system reduced need of air conditioning Prolonged maintenance-free operational life Excellent protection against corrosion due to stainless steel cooling pipes V 00 0 V Hz Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Modbus and CANopen Modbus and CANopen Modbus et CANopen Modbus and CANopen Modbus et CANopen EtherNet/IP, Modbus TCP, PROFIBUS DP V, EtherCAT, Devicenet Modbus TCP, Modbus/Uni-Telway, EtherNet/IP, DeviceNet, PROFIBUS DP, PROFIBUS DP V, INTERBUS S, CC-Link, Modbus TCP, Fipio, Modbus/Uni- Telway, Modbus Plus, EtherNet/IP, DeviceNet, PROFIBUS DP, PROFIBUS DP V, INTERBUS S, CC-Link, Modbus TCP, Fipio, Modbus/Uni- Telway, Modbus Plus, EtherNet/IP, DeviceNet, PROFIBUS DP, PROFIBUS DP V, INTERBUS S, CC-Link, Lonworks, METASYS N, APO- GEE FLN P, BACnet HVAC protocols : LonWorks, BACnet, METASYS N,APOGEE FLN P Industrial protocols: Modbus TCP, Modbus/Uni-Telway, Fipio, Modbus Plus, PROFIBUS DP, PROFIBUS DP V, DeviceNet, Ethernet IP, CC-Link, INTERBUS IEC/EN 0--, IEC/EN 0- (environments and, Categories C and C), UL0C, EN - Category, ISO/EN -/- Category (PLd), IEC 0--, IEC (parts &) level SIL SIL SIL, draft standard EN 0E, CE, UL, CSA, C-Tick, GOST, NOM. Machines IEC/EN 0-, EN 0, EN 0, CSA, UL, C-TICK, CE, NOM, DNV, GOST Machines, industrial processes and infrastructures IEC/EN 0-, EN 0, EN 0, CSA, UL, C-TICK, CE, NOM, DNV, GOST Machines, industrial processes or infrastructures IEC/EN 0-, EN 0, EN 0, CSA, UL, C-TICK, CE, NOM, DNV, GOST Buildings and infrastructures IEC/EN 0-, EN 0, EN 0, CSA, UL, C-TICK, CE, NOM, DNV, GOST Building or infrastructures /

7 Selection guide Specialized drives - Low voltage HVAC Lifts C Applications: C Applications: Range specifically for HVAC applications (heating, ventilation, air conditioning) in buildings. Lifts Altivar Altivar LIFT Variable speed drives for three-phase asynchronous motors. Variable torque building HVAC applications. Variable speed drives for lifts. Description Compact size: side-by-side mounting Simplicity : Dedicated HVAC functions and remote graphic keypad option Openness : Integrated communications for building management systems EMC filters built-in Reduction of the total harmonic distortion THDI<0% Protection class: IP and IP Quick start-up and easy diagnostics with the multi-language graphic display terminal and dedicated Lift configuration menu. Dedicated Lift functions for greater comfort and safety Energy saving: Control of energy efficient permanent magnet synchronous motors Technical information Power range for 0 0 Hz supply 0. kw kw Voltage 00 0 V Single-phase 00 0 V 00 0 V Drive/Output frequency Hz 0... Hz Number of quadrants Cooling system Protection class Motor type Asynchronous Yes Yes Synchronous No Yes Communication Integrated Modbus, METASYS N, APOGEE FLN P, BACnet Modbus and CANopen As an option Lonworks Modbus TCP, Modbus/Uni-Telway, EtherNet/IP, DeviceNet, PROFIBUS DP, PROFIBUS DP V, INTERBUS S, CC-Link Standards and certifications IEC/EN 0-, EN 0, EN 0, CSA, UL, C-TICK, CE, NOM Intended use Buildings Machines IEC/EN 0-, EN0, EN 0, CSA, UL, C-TICK, CE, NOM et EN- (chap..) /

8 Integrated variable speed control solutions Pumps and Fans Low voltage C Applications: Pumps and Fans Medium voltage C Applications: Complex machines/special machines Low voltage C Applications: Complex machines/special machines Medium voltage C Applications: Fans Pumps Compressors Screw feeders Energy: fans, pumps, turbine starters Oil and gas: pumps, compressors, air blowers, extruders Mines and Minerals: conveyors, crushers, fans, pumps Water treatment: pumps, air blowers. Fans Pumps Compressors Screw feeders Energy: fans, pumps, turbine starters Oil and gas: pumps, compressors, air blowers, extruders Mines and Minerals: conveyors, crushers, fans, pumps Water treatment: pumps, air blowers. Altivar Plus Altivar 0 Altivar Plus Altivar 00 High power low voltage variable speed drives for buildings and infrastructures. Variable torque A simple, open range: Greater flexibility: numerous possible options and communication on most industrial networks Easy configuration Ready to use Maximum safety: the Altivar Plus range has a cooling system and components that have been tested in extreme conditions. Time savings on: Creating quotes Placing orders Installation and start-up Medium voltage variable speed drives for asynchronous motors (quotation on request) Environmentally-friendly and Costeffective: Perfect integration in the line supply No disturbance of the motor and the driven load High efficiency Easy to install and set up Compact High power low voltage variable speed drives for industry. Constant torque A simple, open range: Greater flexibility: numerous possible options and communication on most industrial networks Easy configuration Ready to use Maximum safety: the Altivar Plus range has a cooling system and components that have been tested in extreme conditions. Time savings on: Creating quotes Placing orders Installation and start-up 0 00 kw 0.. MW kw 0. MW 0 0 V Hz, kv, kv kv Standard : 0, 0 Hz Option : 0, Hz 0 0 V Medium voltage variable speed drives for asynchronous motors (quotation on request) High efficiency For use in harsh environments Open to all communication networks. kv. kv 0 00 Hz Standard: 0 Hz Option: 0 Hz and and and Air or water cooled Air cooled Air or water cooled Air or water cooled IP/IP IP (water cooled) IP IP (option) IP/IP IP (water cooled) IP (air cooled) IP (water cooled) Yes Yes Yes Yes Yes No Yes No Modbus and CANopen PROFIBUS, Modbus Modbus and CANopen Ethernet, PROFIBUS, Modbus Modbus TCP, Fipio, Modbus/Uni-Telway, Modbus Plus, EtherNet/IP, DeviceNet, PROFIBUS DP, PROFIBUS DP V, INTERBUS S, CC-Link, Lonworks, METASYS N, APOGEE FLN P, BACnet Ethernet, Devicenet, CANopen, etc. Modbus TCP, Fipio, Modbus/Uni-Telway, Modbus Plus, EtherNet/IP, DeviceNet, PROFIBUS DP, PROFIBUS DP V, INTERBUS S, CC-Link Devicenet, CANopen IEC/EN 0--, IEC/EN 0- (environments and ), IEC/EN 00--, --, --, -- (level ), IEC/EN 00-- (level ), IEC/EN 0, IEC 0-- class C and S, CE. DNV, GOST IEC/EN 0--, IEC/EN 0-, IEC/EN 0- (environnements and, catégories C to C), IEEE, IEC/EN 00- and IEC/EN 0 IEC/EN 0--, IEC/EN 0- (environments and ), IEC/EN 00--, --, --, -- (level ), IEC/EN 00-- (level ), IEC/EN 0, IEC 0-- class C and S, CE. DNV and GOST Buildings and infrastructures Infrastructures Machines, industrial processes and infrastructures IEC/EN 0--, IEC/EN 0-, IEC/EN 0- (environments and, categories C to C), CE Machines, industrial processes and infrastructures /

9 Altistart 0 0. kw Simple machines Starters Dimensions (in mm) width x height x depth ATS0 NFT/N FT. x 0 x 0. NFT/N FT/N FT x x. N0pp/N0pp/Npp Npp/Npp x x. Type Soft start units Soft start/soft stop units Motor power 0. to kw 0. to kw Degree of protection IP0 Reduction of current peaks controlled phase controlled phases Adjustable starting time s s Adjustable deceleration time Freewheel stop... s Adjustable breakaway torque 0 0% of DOL motor starting torque Logic inputs logic inputs (start, stop and startup boost) Logic outputs logic output Relay outputs relay output Control supply voltage... 0 VAC ± %, VDC ± % Built into the starter Soft starters for 0. to kw motors Motor Starter Motor power () Nominal current Reference () Single phase -phase 0 V V 0 V 0 V 00 V 0 V kw HP kw HP kw HP A Single phase 0 V or -phase 0 V supply voltage, 0/0 Hz 0, 0, 0,, 0, ATS 0NFT 0,, 0, 0, 0,, ATS 0NFT,,,, ATS 0NFT,,,,, ATS 0NFT,, ATS 0NFT,, Soft start/soft stop units for 0. to kw motors () Motor Starter Motor power () Nominal current Reference () kw HP A -phase supply voltage: 00 0 V 0/0 Hz 0,/, /, ATS 0N0LU, ATS 0N0LU,/ / ATS 0NLU /, /, ATS 0NLU, ATS 0NLU -phase supply voltage: 0 V 0/0 Hz,/,/ ATS 0N0QN ATS 0N0QN, ATS 0NQN,/ ATS 0NQN ATS 0NQN -phase supply voltage: 0 0 V 0/0 Hz / ATS 0N0RT ATS 0N0RT, ATS 0NRT / ATS 0NRT 0 ATS 0NRT () Standard power ratings of motors, HP power ratings indicated according to standard UL 0. () For thermal protection of the motor, please use a thermal circuit-breaker GVp ME, GV P or GV RE (see combinations pages 0/ and 0/). () Control power supply built into the starter. /

10 Starters with TeSys model U Dimensions (in mm) width x height x depth ATSU0 N0LT/N0LT/NLT x x. NLT/NLT x x. Type Soft start/soft stop units Motor power 0. to kw Degree of protection IP0 Reduction of current peaks Yes Adjustable starting and stopping times s Adjustable breakaway torque % of DOL motor starting torque Logic inputs logic inputs (start, stop and startup boost) Logic outputs logic output Relay outputs relay output Control supply voltage VDC, 0 ma, ± % References Soft start/soft stop TeSys starter-controller Power connector units model U Power base Control unit () between ATSU and TeSys model U Supply voltage 00 0 V Motor power 0 V 00 V 0 V Nominal kw HP kw HP current (IcL) 0.. A ATSU0N0LT LUB LUCp0BL VWG.../ A ATSU0N0LT LUB LUCpBL. A ATSU0N0LT LUB LUCpBL VWG A ATSU0N0LT LUB LUCpBL... A ATSU0NLT LUB LUCpBL VWG A ATSU0NLT LUB LUCpBL. A ATSU0NLT LUB LUCpBL VWG.. A ATSU0NLT LUB LUCpBL. 0 A ATSU0NLT LUB LUCpBL VWG () To compose your reference, replace p in the reference with: «A» for a standard control unit, «M» for a multifunction unit and «B» for an advanced unit. /

11 Altistart 00 kw Simple machines Soft start/soft stop units Dimensions (in mm) width x height x depth ATS D to D Size A: x x D to D Size B: x x 0 C to C Size C: x x C to C Size D: 0 x x C to C Size E: 0 x x 0 Supply voltage 0 00 V 0 0 V Protection Degree of protection IP0: for ATS DpppD starters Motor thermal protection Class, 0 or 0 () Drive Number of controlled phases IP00: for ATS CpppC starters (protection of terminals available as an option) Types of control Confi gurable voltage ramp, torque ramp Operating cycle Standard Functions Integrated Bypass contactor Number of I/O Analog inputs PTC probe Logic inputs Logic outputs Analog outputs Relay outputs Dialogue Integrated display terminal, SoMove setup software Communication Integrated Modbus Standards and certifi cations IEC/EN 0--, class A EMC, CE, UL, CSA, C-Tick, GOST, CCC, ABS Motor connection Possible to connect the starter in the motor delta connection () () Soft starter sizing according to thermal protection class Starting current Protection class Class Class 0 Class 0 < =. ln Nominal* Nominal +** Nominal +*** max starting time s s s * nominal size of the soft starter acc. to the nominal motor current (Motor FLA) ** oversize of the soft starter by rating compared to the nominal motor current (Motor FLA) *** oversize of the soft starter by ratings compared to the nominal motor current (Motor FLA) () please fi nd the references details in ATS catalogue for motor delta connection /

12 Connection in the motor power supply line Soft start/soft stop unit 0 0 V - 0/0 Hz Motor Power indicated on rating plate 0 V 00 V 0 V Nominal current kw kw kw starter (IcL) Reference Size.. ATSDQ Size A. ATSDQ Size A ATSDQ Size A 0 0 ATSDQ Size B. ATSDQ Size B ATSDQ Size B 0 ATSCQ Size C 0 ATSCQ Size C 0 0 ATSCQ Size C ATSCQ Size D 0 ATSCQ Size D ATSCQ Size D 0 0 ATSCQ Size D ATSCQ Size E 0 0 ATSCQ Size E Connection in the motor power supply line Soft start/soft stop unit 0 00 V - 0/0 Hz Motor V V Motor power Nominal Control power suppls 0 V 0 V 0 V V 0 V 00 V 0 V 00 V V 0 V 0 V current V 0 V HP kw (IcL) Reference Reference.. A ATSDSU Size A ATSDS Size A A ATSDSU Size A ATSDS Size A A ATSDSU Size A ATSDS Size A A ATSDSU Size B ATSDS Size B A ATSDSU Size B ATSDS Size B 0 0 A ATSDSU Size B ATSCS Size B A ATSCSU Size C ATSCS Size C A ATSCSU Size C ATSCS Size C A ATSCSU Size C ATSCS Size C A ATSCSU Size D ATSCS Size D A ATSCSU Size D ATSCS Size D A ATSCSU Size D ATSCS Size D A ATSCSU Size D ATSCS Size D A ATSCSU Size E ATSCS Size E A ATSCSU Size E ATSCS Size E /

13 Altistart 00 kw Pumping and ventilation machines Soft start/soft stop units Dimensions (in mm) width x height x depth ATS DQ to DQ Size A: 0 x x DQ to CQ Size B: x 0 x CQ to CQ Size C: 00 x 0 x CQ to CQ Size D: 0 x 0 x CQ to CQ Size E: 00 x 0 x 00 CQ to MQ Size F: 0 x 0 x Supply voltage 0 V () Type of application Standard Severe () Starter control supply voltage 0 V Protection Degree of protection IP0: ATSDp to ATSCp starters IP00: ATSCp to ATSMp starters Motor thermal protection Class Class 0 and 0 EMC Class A On all starters Starting mode Class B I/O Analog inputs PTC probe Dialogue Logic inputs Logic outputs Analog outputs Relay outputs On all starters up to A Torque control (patented TCS: Torque Control System) logic inputs, of which are configurable configurable logic outputs analog output Communication Integrated Modbus With gateway relay outputs, of which are configurable Integrated or remote display terminal (in option), SoMove software workshop DeviceNet, Ethernet, Fipio, PROFIBUS DP Motor power 0 V 00 V Nominal current kw kw (IcL). A ATSDQ Size A. A ATSDQ Size A ATSDQ Size A. A ATSDQ Size A ATSDQ Size A. A ATSDQ Size A ATSDQ Size A. A ATSDQ Size A ATSDQ Size A A ATSDQ Size A ATSDQ Size B 0 A ATSDQ Size B ATSDQ Size B. A ATSDQ Size B ATSDQ Size B A ATSDQ Size B ATSCQ Size B 0 A ATSCQ Size B ATSCQ Size C 0 A ATSCQ Size C ATSCQ Size C 0 A ATSCQ Size C ATSCQ Size D A ATSCQ Size D ATSCQ Size D 0 A ATSCQ Size D ATSCQ Size D A ATSCQ Size D ATSCQ Size E 0 A ATSCQ Size E ATSCQ Size E 0 0 A ATSCQ Size E ATSCQ Size E 0 0 A ATSCQ Size E ATSCQ Size E 0 A ATSCQ Size E ATSCQ Size F A ATSCQ Size F ATSMQ Size F A ATSMQ Size F ATSMQ Size F 0 0 A ATSMQ Size F () Possible to connect the starter in the motor delta connection () Starting time greater than 0 seconds (fans, high inertia machines and compressors) /

14 Soft start/soft stop units Dimensions (in mm) width x height x depth ATS DY to DY Size A: 0 x x DY to CY Size B: x 0 x CY to CY Size C: 00 x 0 x CY to CY Size D: 0 x 0 x CY to CY Size E: 00 x 0 x 00 CY to MY Size F: 0 x 0 x Supply voltage 0 0 V () Type of application Standard Severe () Starter control supply voltage Characteristics Motor power 0 V 0 V 0 V V 0 V 00 V 0 V 00 V V 0 V 0 V Nominal current 0 V Identical to 0 V starters HP kw (IcL)..... A ATSDY Size A.. A ATSDY Size A ATSDY Size A. 0.. A ATSDY Size A ATSDY Size A A ATSDY Size A ATSDY Size A A ATSDY Size A ATSDY Size A A ATSDY Size A ATSDY Size B A ATSDY Size B ATSDY Size B A ATSDY Size B ATSDY Size B 0 0 A ATSDY Size B ATSCY Size B A ATSCY Size B ATSCY Size C A ATSCY Size C ATSCY Size C A ATSCY Size C ATSCY Size D A ATSCY Size D ATSCY Size D A ATSCY Size D ATSCY Size D A ATSCY Size D ATSCY Size E A ATSCY Size E ATSCY Size E A ATSCY Size E ATSCY Size E A ATSCY Size E ATSCY Size E A ATSCY Size E ATSCY Size F A ATSCY Size F ATSMY Size F A ATSMY Size F ATSMY Size F A ATSMY Size F () Starter connection in the motor delta connection: up to 00 V only, add "S" at the end of the reference () Starting time greater than 0 seconds (fans, high inertia machines and compressors) /

15 Altivar 0. kw Simple machines Ultra-compact drives Dimensions (in mm) width x height x depth C: x x. F: x x. C: x x. F: 0 x x. C: x x. C: x x. C: x x. Type of drive Single-phase Single-phase Supply voltage V 0 V 0 V Degree of protection IP0 Drive Output frequency Hz Type of control Asynchronous motor U/F, sensorless flux vector control, quadratic Kn Transient overtorque Speed range to 0 Functions Number of functions 0 of the nominal torque Number of preset speeds Number of I/O Analog inputs configurable analog input Logic inputs assignable logic inputs Analog outputs configurable analog output Relay outputs protected relay logic output Dialogue Integrated or remote display terminal, SoMove software workshop, or mobile phone via Bluetooth Communication Integrated Modbus Cards (available as an option) Reduction of current harmonics EMC filter Integrated C EMC As an option Motor power kw/hp 0./0. ATVH0F () C ATVH0M () () C ATVH0M () C 0./0. ATVH0F C ATVH0M () C ATVH0M C 0./0. ATVH0M () C 0./ ATVH0F C ATVH0M () C ATVH0M C./ ATVHUM () C ATVH0M F./ ATVHUM () C ATVH0M F / ATVH00M F / ATVH00M F () Because of the low heat dissipation, the ATVH0.. is only supplied on a base plate () Also exists as a multipack /

16 Altivar 0. kw Building Drives for HVAC applications Dimensions (in mm) width x height x depth IP IP TA: x x T: x x TA: x x T: 0 x 0 x 0 TA: x x T: 0 x 0 x TA: x. x T: x x TA: 0 x 0 x T: x 0 x TA: 0 x 0 x 0 T: x 0 x TA: 0 x 0 x T: x 00 x TA: 0 x 0 x 0 Type of drive IP IP Supply voltage 00 0 V 0 0 V 0 0 V Degree of protection IP and IP on the upper part IP drive available in two manufacturing variants, ATVW N C EMC or ATVW NC C EMC Output frequency Hz Type of control Kn quadratic ratio, sensorless fl ux vector control, voltage/frequency ratio ( points), energy saving ratio Speed range to I/O Analog inputs switch-confi gurable current or voltage analog input and voltage analog input, confi gurable as a PTC probe input Logic inputs programmable logic inputs Analog outputs switch-confi gurable current or voltage analog output Relay outputs relay logic outputs Dialogue Integrated display terminal with local controls () or remote display terminal or PC software () Communication Integrated Modbus, APOGEE FLN P, Metasys N, BACnet (see page /) As an option LonWorks EMC filter Integrated C EMC C EMC C EMC Available as an option C EMC C EMC Motor power kw/hp 0./ ATVH0MX TA ATVH0N TA ATVW0N T ATVW0NC T./ ATVHUMX TA ATVHUN TA ATVWUN T ATVWUNC T./ ATVHUMX TA ATVHUN TA ATVWUN T ATVWUNC T / ATVHU0MX TA ATVHU0N TA ATVWU0N T ATVWU0NC T / ATVHU0MX TA ATVHU0N TA ATVWU0N T ATVWU0NC T./. ATVHUMX TA ATVHUN TA ATVWUN T ATVWUNC T./ ATVHUMX TA ATVHUN TA ATVWUN T ATVWUNC T / ATVHDMX TA ATVHDN TA ATVWDN T ATVWDNC T /0 ATVHDMX TA ATVHDN TA ATVWDN T ATVWDNC T./ ATVHDMX TA ATVHDN TA ATVWDN T ATVWDNC T /0 () ATVHDNS TA /0 ATVHDMX TA ATVHDN () TA ATVWDN T ATVWDNC T 0/0 ATVHD0MX TA ATVHD0N () TA ATVWD0N T ATVWD0NC T /0 ATVHDN TA ATVWDN T ATVWDNC T /0 ATVHDN TA ATVWDN T ATVWDNC T / ATVHDN TA ATVWDN T ATVWDNC T /0 ATVHDN TA ATVWDN T ATVWDNC T () Drive with local controls, Run/Stop, Loc/Rem. keys () For references ATVHDN and ATVHD0N, please refer to the Schneider Electric catalogue. () PC Software is available as a free download from () Optimized size and weight /

17 Altivar 0. kw Simple industrial machines Compact drives Dimensions (in mm) width x height x depth T : X X T : X X T : X X T : X X T : X X T : X X T : X X T : X 0 X T : X X Type of drive Single-phase 0 V 0 V 00V 00V Supply voltage with integrated EMC filters without EMC filter with integrated EMC filters without EMC filter Degree of protection IP & IP on upper part and IP on terminals Drive Output frequency Hz Type of control Asynchronous motor Standard (voltage / frequency) - Performance (sensorless flux vector control) Transient overtorque Speed range to 0 Functions Number of functions 0 Dialogue Number of preset speeds Number of I/O Analog inputs Logic inputs Analog outputs Logic outputs Relay outputs Energy saving ratio, pump & Fan ratio (Kn² quadratic ratio)... 00% of the nominal motor torque Integrated -digit display, remote terminals (IP or IP), Altivar / remote graphic display terminal Communication Integrated Modbus and CANopen As an option CANopen Daisy chain, Modbus TCP, DeviceNet, PROFIBUS DP, Fipio Reduction of current harmonics EMC filter Integrated C EMC Integrated C() or C EMC As an option C EMC C EMC Motor power kw/hp 0./0. ATVH0M T ATVH0M T 0./0. ATVH0M T ATVH0M T ATVH0N T 0./0. ATVH0M T ATVH0M T ATVH0N T 0./ ATVH0M T ATVH0M T ATVH0N T ATVH0S T./. ATVHUM T ATVHUM T ATVHUN T./ ATVHUM T ATVHUM T ATVHUN T ATVHUS T./ ATVHUM () T ATVHUM T ATVHUN T ATVHUS T /- ATVHU0M T ATVHU0N T / ATVHU0M T ATVHU0N T ATVHU0S T./. ATVHUM T ATVHUN T ATVHUS T./ ATVHUM T ATVHUN T ATVHUS T / ATVHDM T ATVHDN T ATVHDS T /0 ATVHDM T ATVHDN T ATVHDS T () C up to kw () Supplied with integrated C EMC filter /

18 Altivar C 0. kw Simple machines Enclosed IP drives Dimensions (in mm) width x height x depth Size : x 0 x / Size : x x Size : 0 x 0 x 0 / Size : 0 x x Size : 0 x x Supply voltage Single-phase 00 0 V 0 00 V Degree of protection IP Description Enclosure equipped with an Altivar drive with external heatsink. Removable covers for adding switch-disconnector or circuit-breaker, buttons and/or LEDs, potentiometer Motor power kw/hp 0./0. ATVC0M Size 0./0. ATVC0M Size ATVC0N Size 0./0. ATVC0M Size ATVC0N Size 0./ ATVC0M Size ATVC0N Size./. ATVCUM Size ATVCUN Size./ ATVCUM Size ATVCUN Size./ ATVCUM Size ATVCUN Size / ATVCU0N Size / ATVCU0N Size./. ATVCUN () Size./ ATVCUN () Size / ATVCDN () Size /0 ATVCDN () Size () Standard enclosed drive /

19 Altivar 0. kw Complex machines Compact drives Dimensions (in mm) width x height x depth T: x x T: 0 x x T: x 0 x (EMC plate installed) T: x x (EMC plate not installed) T: x 0 x (EMC plate installed) T: x 0 x (EMC plate not installed) Type of drive Single-phase 0 V with integrated EMC filter 00 V with integrated EMC filter Degree of protection IP0 Drive Output frequency 0. Hz Type of control Asynchronous motor Standard (voltage/frequency) Performance (sensorless fl ux vector control) Pump/fan (Kn² quadratic ratio) Energy saving ratio Synchronous motor Profile for open loop synchronous motor Transient overtorque...00% of the nominal motor torque Speed range to 0 Functions Number of functions Number of I/O Analog inputs - Response time : ms, resolution bits Logic inputs - Response time : ms, configurable in PTC and IN pwm Analog outputs - Updating time : ms Logic outputs - Sampling time : ms, configurable as voltage (0- V) or current (0-0 ma) Relay outputs Dialogue -digit display, remote display terminal (IP or IP), remote graphic display terminal, SoMove setup software and SoMove Mobile application for mobile phone. Communication Integrated Modbus and CANopen - Bluetooth link As an option DeviceNet, PROFIBUS DP V, EtherNet/IP, Modbus TCP, EtherCat Reduction of current harmonics EMC filter Integrated C EMC As an option C EMC Motor power kw HP 0. / ATVH0M T 0. / ATVH0M T ATVH0N T 0. / ATVH0M T ATVH0N T 0. ATVH0M T ATVH0N T. / ATVHUM T ATVHUN T. ATVHUM T ATVHUN T. ATVHUM T ATVHUN T - ATVHU0N T ATVHU0N T. / ATVHUN T. ATVHUN T ATVHDN T 0 ATVHDN T /

20 Notes /

21 Altivar kw Pumping and ventilation machines Drives for industry and infrastructure Dimensions (in mm) width x height x depth T : x 0 x T : x 0 x T : x x TA : x x TB : 0 x 00 x T : 0 x 0 x TA : 0 x 0 x TB : 0 x 0 x T : 0 x 0 x 0 T : 0 x 0 x T : 0 x x T : 0 x x T : 0 x x T : x x T : 0 x x T : x x Type of drive Supply voltage Single-phase 00 0 V 00 0 V 0 0 V Degree of protection IP0 for unprotected drives and IP on the upper part Drive Output frequency 0. Hz up to kw; Hz from to 00 kw Type of control Asynchronous motor Kn quadratic ratio, flux vector control with or without sensor, voltage/frequency ratio ( or points), energy saving ratio Synchronous motor Vector control without speed feedback Transient overtorque % of the nominal drive current for 0 seconds Speed range 0 in open loop mode Functions Number of functions > Number of preset speeds Number of I/O Analog inputs /Logic inputs 0 Analog outputs /Logic outputs 0 Relay outputs Safety input Dialogue Remote graphic display terminal, SoMove setup software () Communication Integrated Modbus and CANopen As an option HVAC protocols: LonWorks, BACnet, METASYS N, APOGEE FLN P Industrial protocols: Modbus TCP Daisy Chain, Modbus/Uni-Telway, EtherNet/IP, EtherCAT, DeviceNet, PROFIBUS DP V0 and V, INTERBUS, CC-Link Cards (available as an option) Multi-pump cards, I/O extension cards, Controller Inside programmable card Reduction of current harmonics DC choke integrated or supplied with the drive or AFE Altivar (Active Front End) EMC filter Integrated C EMC C EMC up to. kw C EMC up to kw C EMC from. to 0 kw As an option C EMC C EMC C EMC from 0. to 0 kw Motor power kw/hp 0./0. ATVH0M T 0./ ATVHUM T ATVH0M T ATVH0N T./ ATVHUM T ATVHUM T ATVHUN T./ ATVHU0M T ATVHUM T ATVHUN T / ATVHU0M () T ATVHU0M T ATVHU0N T / ATVHUM () T ATVHU0M T ATVHU0N T./. ATVHUM () TA ATVHUM T ATVHUN T./ ATVHUM TA ATVHUN T / ATVHDMX() TB ATVHDN TA /0 ATVHDMX() TB ATVHDN TB./ ATVHDMX() T ATVHDN TA /0 ATVHDMX() T ATVHDN T 0/0 ATVHD0MX() TB ATVHD0N TA /0 ATVHDMX() TB ATVHDN TA /0 ATVHDMX() TB ATVHDN T / ATVHDMX() T ATVHDN T /0 ATVHDMX() T ATVHDN T 0/ ATVHD0MX() T ATVHD0N T / ATVHCN T /00 ATVHCN T 0/0 ATVHCN T 0/0 ATVHCN T 0/00 ATVHCN T /00 ATVHCN T 00/00 ATVHC0N T 00/00 ATVHC0N T 0/00 ATVHCN T () Must be used with a line choke, refer to the Schneider Electric catalogue. () Drive supplied without EMC fi lter () SoMove setup software : available from 0. Altivar is also supported by Powersuite software workshop. For all other variants, please refer to the Schneider Electric catalogue. /0

22 Altivar kw Pumping and ventilation machines Drives for industry and infrastructure Dimensions (in mm) T : 0 x 0 x T : 0 x 0 x 0 T : 0 x x T : x x T : x x width x height x depth Type of drive Supply voltage V Degree of protection IP0 and IP on the upper part Drive Output frequency 0. Hz up to kw; Hz from to 00 kw Type of control Asynchronous motor Kn quadratic ratio, flux vector control with or without sensor, voltage/frequency ratio ( or points), energy saving ratio Synchronous motor Vector control without speed feedback Transient overtorque % of the nominal drive current for 0 seconds Speed range 0 in open loop mode Functions Number of functions > Number of preset speeds Number of I/O Analog inputs /Logic inputs 0 Analog outputs /Logic outputs 0 Relay outputs Safety input Dialogue Remote graphic display terminal, SoMove setup software () Communication Integrated Modbus and CANopen As an option HVAC protocols: LonWorks, BACnet, METASYS N, APOGEE FLN P Industrial protocols: Modbus TCP Daisy Chain, Modbus/Uni-Telway, EtherNet/IP, EtherCAT, DeviceNet, PROFIBUS DP V0 et V, INTERBUS, CC-Link Cards (available as an option) Multi-pump cards, I/O extension cards, Controller Inside programmable card Reduction of current harmonics DC choke integrated or supplied with the product or AFE Altivar (Active Front End) EMC filter Integrated C EMC Motor power kw/hp 00 V V 0 V kw HP kw. ATVHU0Y T ATVHU0Y T. ATVHUY T... ATVHUY T. ATVHDY T ATVHDY T 0. ATVHDY T. ATVHDY T 0 0 ATVHD0Y T 0 0 ATVHDY T 0 ATVHDY T 0 ATVHDY T ATVHDY T 0 0 ATVHD0Y T 0 ATVHCY T ATVHCY T 0 ATVHCY T ATVHC0Y T ATVHCY T 0 0 ATVHCY T 0 00 ATVHC0Y T ATVHC0Y T ATVHCY T ATVHC0Y T () SoMove setup software : available from 0. Altivar is also supported by Powersuite software workshop. For all other variants, please refer to the Schneider Electric catalogue. /

23 Altivar 0. 0 kw Pumping and ventilation machines IP drives Dimensions (in mm) width x height x depth ATVW TA : x 0 x TD : x x TA : x 0 x TE : x 0 x TB : x x TF : x 0 x TC : 0 x 0 x TG : x 00 x Type of drive 0 0 V Degree of protection Type () / IP Drive Output frequency 0. Hz up to kw; Hz from to 00 kw Speed range Type of control Asynchronous motor Kn quadratic ratio, flux vector control with or without sensor, voltage/frequency ratio ( or points), energy saving ratio Transient overtorque Synchronous motor Vector control without speed feedback % of the nominal drive current for 0 seconds 0 in open loop mode Functions Number of functions > Number of preset speeds Number of I/O Analog inputs /Logic inputs 0 Analog outputs /Logic outputs 0 Relay outputs Safety input Dialogue Remote graphic display terminal, SoMove setup software () Communication Integrated Modbus and CANopen As an option HVAC protocols: LonWorks, BACnet, METASYS N, APOGEE FLN P Industrial protocols: Modbus TCP Daisy Chain, Modbus/Uni-Telway, EtherNet/IP, EtherCAT, DeviceNet, PROFIBUS DP V0 and V, INTERBUS, CC-Link Cards (available as an option) Multi-pump cards, I/O extension cards, Controller Inside programmable card Reduction of current harmonics Integrated DC choke EMC filter Integrated C EMC As an option Motor power kw/hp 0./ ATVW0N TA ATVE0N TA./ ATVWUN TA ATVEUN TA./ ATVWUN TA ATVEUN TA / ATVWU0N TA ATVEU0N TA / ATVWU0N TA ATVEU0N TA./. ATVWUN TB ATVEUN TB./ ATVWUN TB ATVEUN TB / ATVWDN TC ATVEDN TC /0 ATVWDN TD ATVEDN TD./ ATVWDN TD ATVEDN TD /0 ATVWDN TE ATVEDN TE 0/0 ATVWD0N TF ATVED0N TF /0 ATVWDN TF ATVEDN TF /0 ATVWDN TG ATVEDN TG / ATVWDN TG ATVEDN TG /0 ATVWDN TG ATVEDN TG 0/ ATVWD0N TG ATVED0N TG Drive with integrated C fi lter: add the letter C at the end of the reference For example, ATVW0N becomes ATVW0NC For other variants, please refer to the Schneider Electric catalogue. () For ATVW... range only. () SoMove setup software : available from 0. Altivar is also supported by Powersuite software workshop. /

24 Altivar kw Pumping and ventilation machines IP Altivar kit with preassembled enclosure Drive Kit ATVHCN ATVHCN ATVHCN ATVHCN ATVHCN ATVHCN ATVHCN ATVHCN ATVHC0N ATVHC0N ATVHCN VWA braking unit Additional empty enclosure (00 mm) Additional empty enclosure (00 mm) VWA VWA VWA VWA VWA VWA VWA VWA VWA VWA0 VWA /

25 Altivar Q 00 kw Pumping and ventilation machines Water-cooled drives for harsh environments Dimensions (in mm) T : 0 x 0 x T : x 0 x T : x x width x height x depth Type of drive Supply voltage V V Degree of protection Sideways and front IP - Top IP0 - Bottom IP00 Drive Output frequency Hz Type of control Asynchronous motor Kn quadratic ratio, flux vector control with or without sensor, voltage/frequency ratio ( or points), energy saving ratio Synchronous motor Vector control without speed feedback Transient overtorque % of the nominal drive current for 0 seconds Speed range 0 in open loop mode Functions Number of functions > Number of preset speeds Number of I/O Analog inputs /Logic inputs 0 Analog outputs /Logic outputs 0 Relay outputs Safety input Dialogue Remote graphic display terminal, SoMove setup software () Communication Integrated Modbus and CANopen As an option HVAC protocols: LonWorks, BACnet, METASYS N, APOGEE FLN P Industrial protocols: Modbus TCP, Modbus/Uni-Telway, Fipio, Modbus Plus, Profbus DP, Profbus DP V, DeviceNet, EthernetIP, CC-Link, INTERBUS Cards (available as an option) Multi-pump cards, I/O extension cards, Controller Inside programmable card Reduction of current harmonics Optional AC choke, Altivar AFE (Active Front End) EMC filter Integrated C EMC As an option C EMC Motor power kw/hp / ATVQCN T /00 ATVQCN T 0/0 ATVQCN T 00/00 ATVQC0N T 0/00 ATVQCN T /00 ATVQCN T 00/00 ATVQC0N T 00/00 ATVQC0N T 0/00 ATVQCN T 00 V V 0 V KW HP KW ATVQCY T 0 ATVQCY T ATVQC0Y T ATVQCY T 0 0 ATVQCY T 0 00 ATVQC0Y T ATVQC0Y T ATVQCY T ATVQC0Y T () SoMove setup software : available during 0. Altivar also works with the PowerSuite software workshop. /

26 Altivar Plus 0 00 kw Pumping and ventilation machines Solutions in IP and IP ready-assembled enclosures Dimensions (in mm) ATVEXCC E : 00 x x E : 00 x x E : 00 x x E : 0 x x Enclosure types Degree of protection 0 0 V - 00 V - 0 V () IP, IP Drive Output frequency 0. Hz up to kw; Hz from 00 kw Speed range width x height x depth Type of control Asynchronous motor Kn quadratic ratio, flux vector control with or without sensor, voltage/frequency ratio ( or points), energy saving ratio Transient overtorque Synchronous motor Vector control without speed feedback % of the nominal drive current for 0 seconds 0 in open loop mode Functions Number of functions > Number of preset speeds Number of I/O Analog inputs /Logic inputs 0 Analog outputs /Logic outputs 0 Relay outputs Safety input Dialogue Remote graphic display terminal, SoMove setup software () Communication Integrated Modbus and CANopen As an option HVAC protocols: LonWorks, BACnet, METASYS N, APOGEE FLN P Industrial protocols: Modbus TCP, Modbus/Uni-Telway, EtherNet/IP, EtherCAT, DeviceNet, PROFIBUS DP V0 and V, INTERBUS, CC-Link. Cards (available as an option) Multi-pump cards, I/O extension cards, Controller Inside programmable card Reduction of current harmonics DC choke or Integrated AC choke, variant pulse, AFE Altivar (Active Front End) EMC filter Integrated C EMC Equipment A wide range of options listed in the catalogue provides add-ons for the standard offer as required. As well as the options listed in the catalogue, it is possible to customise the equipment. Just contact our teams of experts directly. - Water cooling solution - Integration of specific options IP 0 V 00 V 0 V kw/hp Dimensions kw Dimensions kw Dimensions 0/ ATVEXCD0N E 0 ATV EXCD0N E / ATVEXCCN E ATV EXCCN E ATV EXCCY E /00 ATVEXCCN E ATV EXCCN E ATV EXCCY E 0/0 ATVEXCCN E 0 ATV EXCCN E 0 ATV EXCCY E 0/0 ATVEXCCN E 00 ATV EXCC0N E 00 ATV EXCC0Y E 0/00 ATVEXCCN E 0 ATV EXCCN E 0 ATV EXCCY E /00 ATVEXCCN E ATV EXCCN E ATV EXCCY E 00/00 ATVEXCC0N E 00 ATV EXCC0N E 00 ATV EXCC0Y E 00/00 ATVEXCC0N E 00 ATV EXCC0N E 00 ATV EXCC0Y E 0/00 ATVEXCCN E 0 ATV EXCCN E 0 ATV EXCCY E 00 ATV EXCC0Y E () The Altivar range in ready-assembled enclosure consists of: an ATVH drive, a switch and fast-acting fuses, an IP remote mounting kit for graphic display terminal () SoMove setup software : available from 0. Altivar is also supported by Powersuite software workshop. IP offer available up to 00 kw. For ratings above 00 kw, please consult your Regional Sales Offi ce. /

27 Altivar Plus 0 00 kw Pumping and ventilation machines Solutions in IP and IP ready-assembled enclosures Dimensions (in mm) width x height x depth ATVEX E : 00 x x E : 00 x x E : 00 x x E : 00 x x E : 00 x x E : 00 x x E : 0 x x E : 0 x x E : 00 x x E : 00 x x IP () 0 V 00 V 0 V Compact floor-standing enclosure kw/hp Dimensions kw Dimensions kw Dimensions 0 / ATVEXCD0N E 0 ATVEXCD0N E / ATVEXCCN E ATVEXCCN E ATVEXCCY E /00 ATVEXCC N E ATVEXCCN E ATVEXCCY E 0/0 ATVEXCCN E 0 ATVEXCCN E 0 ATVEXCCY E 0/0 ATVEXCCN E 00 ATVEXCC0N E 00 ATVEXCC0Y E 0/00 ATVEXCCN E 0 ATVEXCCN E 0 ATVEXCCY E /00 ATVEXCCN E ATVEXCCN E ATVEXCCY E 00/00 ATVEXCC0N E 00 ATVEXCC0N E 00 ATVEXCC0Y E 00/00 ATVEXCC0N E 00 ATVEXCC0N E 00 ATVEXCC0Y E 0/00 ATVEXCCN E 0 ATVEXCCN E 0 ATVEXCCY E 00 ATVEXCC0Y E () The IP offer is available for power ratings up to 00 kw. For higher power ratings up to 00 kw, consult your customer care centre. IP () 0 V 00 V 0 V Separate air flow kw/hp Dimensions kw Dimensions kw Dimensions 0 / ATVEXSD0N E 0 ATVEXSD0N E / ATVEXSCN E ATVEXSCN E ATVEXSCY E /00 ATVEXSCN E ATVEXSCN E ATVEXSCY E 0/0 ATVEXSCN E 0 ATVEXSCN E 0 ATVEXSCY E 0/0 ATVEXSCN E 00 ATVEXSC0N E 00 ATVEXSC0Y E 0/00 ATVEXSCN E 0 ATVEXSCN E 0 ATVEXSCY E /00 ATVEXSCN E ATVEXSCN E ATVEXSCY E 00/00 ATVEXSC0N E 00 ATVEXSC0N E 00 ATVEXSC0Y E 00/00 ATVEXSC0N E 00 ATVEXSC0N E 00 ATVEXSC0Y E 0/00 ATVEXSCN E 0 ATVEXSCN E 0 ATVEXSCY E 00 ATVEXSC0Y E () The IP offer with separate air flow is available for power ratings upt o 00 kw. For higher power ratings up to 00 kw, consult your customer care centre. /

28 Altivar Plus-LH 0 kw Pumping and ventilation machines Low harmonic solution in IP and IP enclosures Dimensions (in mm) width x height x depth ATVEXpppppNH E : 00 X X E : 00 X X E : 00 X X E : 00 X X E : 00 X X E : 00 X X E : 0 X X E : 0 X X E : 00 X X E : 00 X X E : 000 X X E : 000 X X E : 00 X X E : 00 X X Enclosure types Degree of protection 0 0 V () IP, IP Drive Output frequency Hz Speed range Type of control Asynchronous motor Kn quadratic ratio, flux vector control with or without sensor, voltage/frequency ratio ( or points), energy saving ratio Overload Synchronous motor Vector control without speed feedback % for 0 seconds per minutes 0 in open loop mode Functions Number of functions > Number of preset speeds Number of I/O Analog inputs /Logic inputs 0 Analog outputs /Logic outputs 0 Relay outputs Safety input Dialogue Remote graphic display terminal, SoMove setup software () Communication Integrated Modbus and CANopen As an option HVAC protocols: LonWorks, BACnet, METASYS N, APOGEE FLN P Industrial protocols: Modbus TCP, Modbus/Uni-Telway, EtherNet/IP, EtherCAT, DeviceNet, PROFIBUS DP V0 and V, INTERBUS, CC-Link. Cards (available as an option) Multi-pump cards, I/O extension cards, Controller Inside programmable card EMC filter Integrated C EMC Equipment A wide range of options listed in the catalogue provides add-ons for the standard offer as required. As well as the options listed in the catalogue, it is possible to customise the equipment. Just contact our teams of experts directly. - Integration of specific options Motorpower kw ATVEXCDNH E ATVEXCDNH E ATVEXCDNH E ATVEXCDNH E 0 ATVEXCD0NH E ATVEXCD0NH E ATVEXCCNH E ATVEXCCNH E ATVEXCCNH E ATVEXCCNH E 0 ATVEXCCNH E ATVEXCCNH E 0 ATVEXCCNH E ATVEXCCNH E 0 ATVEXCCNH E ATVEXCCNH E ATVEXCCNH E ATVEXCCNH E 00 ATVEXCC0NH E ATVEXCC0NH E 00 ATVEXCC0NH E ATVEXCC0NH E 0 ATVEXCCNH E ATVEXCCNH E () The Altivar range in a ready-assembled enclosure consists of: an ATVH...drive, an active in feed converter,a clean power filter, a switch and fast-acting fuses, an IP remote mounting kit for graphic display terminal. () SoMove setup software : available from 0. Altivar is also supported by Powersuite software workshop. /

29 Altivar kw Pumping and ventilation machines I/O extension and specific cards Type of card I/O extension Logic Extended Description relay logic output ( C/O contact) x VDC positive or negative logic inputs x 0 0 ma differential current analog input software-configurable voltage (0 VDC) or x VDC open collector positive or negative logic current (0 0 ma) analog input outputs input for PTC probes software-configurable voltage (±V, 0 VDC) or current (0 0 ma) analog inputs relay logic output ( C/O contact) x VDC positive or negative logic inputs x VDC open collector positive or negative logic outputs input for PTC probes frequency control input Reference VWA0 VWA0 "Controller Inside" programmable card Type of card Programmable Controller Inside Description Reference logic inputs, of which can be used for counters or of which can be used for incremental encoders analog inputs, logic outputs, analog outputs, a master port for the CANopen bus, a PC port for programming with the PS software workshop. VWA0 Multi-pump cards Type of card Multi-pump Description Reference Description Reference The pump switching card ensures compatibility of applications developed on the Altivar. The VWA0 Water Solution card can be used to support all multi-pump applications. This card is specific to pump switching. It ensures optimum flow for an impeccable quality of service. Its algorithm both saves energy and prolongs equipment service life. VWA0 This card offers all the functions needed to manage a pumping, booster, irrigation station, etc with the operational safety of a control and monitoring system. VWA0 /

30 Accessories and options Braking resistors The network braking unit can be used to restore the following to the line supply: p The energy from the motor p The energy from the motors controlled by several drives connected on the same DC bus Type of drive Supply voltage 00 0 V 0/0 Hz 0 0 V 0/0 Hz ATVH0M VWA0 ATVHUM, HUM VWA0 ATVHU0M, HU0M VWA0 ATVHUM, HUM VWA0 ATVHDMX VWA0 ATVHDMX VWA0 ATVHDMX, HDMX VWA0 ATVHD0MX VWA0 ATVHDMX, HDMX VWA0 ATVHDMX, HDMX VWA ATVHD0MX VWA ATVH0N HU0N, ATVW0N WUN, VWA0 ATVW0NC WUNC ATVHUN, HUN, ATVWUN, WDN, VWA0 ATVWUNC, WDNC ATVHDN, HDN, ATVWDN, WDN, VWA0 ATVWDNC, WDNC ATVHDN HD0N, ATVWDN WDN, VWA0 ATVWDNC WDNC ATVHDN, ATVWDN, WDNC VWA0 ATVWDN WD0N, ATVWDNC WD0NC VWA0 ATVHDN HDN VWA0 ATVHD0N, HCN VWA ATVHCN, HCN, ECN VWA ATVHCN VWA ATVHCN VWA ATVHCN VWA ATVHC0N, HC0N, EC0N VWA ATVHCN VWA Other accessories (see references in the Schneider Electric Catalogue) > Resistance braking units (integrated in ATV drives up to 0 kw) > Additional EMC input filters > AC line chokes > Optional DC chokes > Passive filters > Sinus filters > Motor chokes > Altivar AFE (Active Front End) > Regenerative network braking unit /

31 Altivar 0. 0 kw Complex, high-power machines High performance drives Dimensions (in mm) width x height x depth T : x 0 x T : x 0 x T : x x TA : x x TB : 0 x 00 x T : 0 x 0 x TA : 0 x 0 x TB : 0 x 0 x T : 0 x 0 x 0 T : 0 x 0 x T : 0 x x T : 0 x x T : 0 x x T : x x T : 0 x x T : x x Type of drive Single-phase Supply voltage 00 0 V () 00 0 V () 0 0 V () Degree of protection IP0 for unprotected drives and IP on the upper part Drive Output frequency 0 Hz up to kw Hz from 0 kw Speed range Type of control Asynchronous motor Flux vector control with or without sensor, voltage/frequency ratio ( or points), ENA System Transient overtorque Functions Number of functions > Synchronous motor Vector control with and without speed feedback () Number of preset speeds Number of I/O Analog inputs Logic inputs 0 0% of nominal motor torque for seconds, and % for 0 seconds 00 in closed loop mode with encoder feedback, 0 in open loop mode Analog outputs Logic outputs 0 Relay outputs Safety input Dialogue Remote graphic display terminal, SoMove setup software () Communication Integrated Modbus and CANopen As an option Modbus TCP, Modbus/Uni-Telway, EtherNet/IP, EtherCAT, DeviceNet, PROFIBUS DP V0 and V, INTERBUS, CC-Link. Cards (available as an option) Encoder interface cards, I/O extension cards, Controller Inside programmable card Reduction of current harmonics DC choke integrated or supplied with the product or Altivar AFE (Active Front End ). EMC filter Integrated C EMC up to kw, C EMC from, to 00 kw As an option C EMC from 0. to 00 kw Motor power kw/hp 0./0. ATVH0M T ATVH0M T 0./ ATVHUM T ATVH0M T ATVH0N T./ ATVHUM T ATVHUM T ATVHUN T./ ATVHU0M T ATVHUM T ATVHUN T / ATVHU0M () T ATVHU0M T ATVHU0N T / ATVHUM () T ATVHU0M T ATVHU0N T./. ATVHUM () TA ATVHUM T ATVHUN T./ ATVHUM TA ATVHUN T / ATVHDMX () TB ATVHDN TA /0 ATVHDMX () TB ATVHDN TB./ ATVHDMX () T ATVHDN TB /0 ATVHDMX () T ATVHDN T 0/0 ATVHD0MX () TB ATVHD0N TA /0 ATVHDMX () TB ATVHDN TA /0 ATVHDMX () TB ATVHDN T / ATVHDMX () T ATVHDN T /0 ATVHDMX () T ATVHDN T 0/ ATVHD0N T / ATVHCN T /00 ATVHCN T 0/0 ATVHCN T 00/00 ATVHC0N T 0/0 ATVHCN T 0/0 ATVHCN T /00 ATVHCN T / ATVHC0N T 00/00 ATVHC0N T () Must be used with a line choke, Refer to the Schneider Electric catalogue. () Drive supplied without EMC fi lter. () A three-phase V range on base plate is available from 0. to kw. Please refer to the Schneider Electric catalogue. () Vector control with speed feedback for synchronous motors is supported by the S variant of the Altivar. () SoMove setup software : available from 0. Altivar is also supported by Powersuite software workshop. /0

32 Altivar 0. 0 kw Complex, high-power machines High performance drives Dimensions (in mm) width x height x depth T : x 0 x T : x 0 x T : x x TA : x x TB : 0 x 00 x T : 0 x 0 x TA : 0 x 0 x TB : 0 x 0 x T : 0 x 0 x 0 T : 0 x 0 x T : 0 x x T : 0 x x T : 0 x x T : x x T : 0 x x T : x x Type of drive Supply voltage Degree of protection V IP0 for unprotected drives and IP on the upper part Drive Output frequency 0 Hz up to kw Hz from 0 kw Speed range Type of control Asynchronous motor Flux vector control with or without sensor, voltage/frequency ratio ( or points), ENA System Transient overtorque Functions Number of functions > Synchronous motor Vector control with and without speed feedback () Number of preset speeds Number of I/O Analog inputs Logic inputs 0 Analog outputs Logic outputs 0 Relay outputs Safety input 0% of nominal motor torque for seconds, and % for 0 seconds 00 in closed loop mode with encoder feedback, 0 in open loop mode Dialogue Remote graphic display terminal, SoMove setup software () Communication Integrated Modbus and CANopen Cards (available as an option) Reduction of current harmonics As an option Modbus TCP, Modbus/Uni-Telway, EtherNet/IP, EtherCAT, DeviceNet, PROFIBUS DP V0 and V, EMC filter Integrated C EMC INTERBUS, CC-Link. Encoder interface cards, I/O extension cards, Controller Inside programmable card DC choke integrated or DC choke optional or AFE Altivar (Active Front End) Motor power kw/hp 00 V V 0 V kw HP kw.. ATVHUY T. ATVHU0Y T ATVHU0Y T. ATVHUY T... ATVHUY T. ATVHDY T ATVHDY T 0. ATVHDY T. ATVHDY T 0 0 ATVHD0Y T 0 0 ATVHDY T 0 ATVHDY T 0 ATVHDY T ATVHDY T 0 0 ATVHD0Y T 0 ATVHCY T ATVHCY T 0 ATVHCY T ATVHC0Y T ATVHCY T 0 0 ATVHCY T 0 00 ATVHC0Y T ATVHC0Y T ATVHCY T () Vector control with speed feedback for synchronous motors is supported by the S variant of the Altivar. () SoMove setup software : available from 0. Altivar is also supported by Powersuite software workshop.. For all other variants, please refer to the Schneider Electric catalogue. /

33 Altivar 0. kw Complex, high-power machines IP drives Dimensions (in mm) width x height x depth ATVW, ATVE up to kw TA : x 0 x TD : x x TA : x 0 x TE : x 0 x TB : x x TF : x 0 x TC : 0 x 0 x TG : x 00 x Type of drive Degree of protection 0 0 V UL Type () / IP Drive Output frequency 0 Hz up to kw Hz from kw Speed range With switch Type of control Asynchronous motor Flux vector control with or without sensor, voltage/frequency ratio ( or points), ENA System Transient overtorque Synchronous motor Functions Number of functions > Number of preset speeds Number of I/O Analog inputs Logic inputs 0 Vector control without speed feedback 0% of nominal motor torque for seconds, and % for 0 seconds 00 in closed loop mode with encoder feedback, 0 in open loop mode Analog outputs Logic outputs 0 Relay outputs Safety input Dialogue Remote graphic display terminal, SoMove setup software () Communication Integrated Modbus and CANopen As an option Modbus TCP, Modbus/Uni-Telway, EtherNet/IP, EtherCAT, DeviceNet, PROFIBUS DP V0 et V, INTERBUS, CC-Link. Cards (available as an option) Encoder interface cards, I/O extension cards, Controller Inside programmable card Reduction of current harmonics Optional chokes and passive fi lters EMC filter Integrated C EMC As an option External C EMC Motor power kw/hp 0./ ATVW0N TA ATVE0N TA./ ATVWUN TA ATVEUN TA./ ATVWUN TA ATVEUN TA / ATVWU0N TA ATVEU0N TA / ATVWU0N TA ATVEU0N TA./. ATVWUN TB ATVEUN TB./ ATVWUN TB ATVEUN TB / ATVWDN TC ATVEDN TC /0 ATVWDN TD ATVEDN TD./ ATVWDN TD ATVEDN TD /0 ATVWDN TD ATVEDN TD 0/0 ATVWD0N TF ATVED0N TF /0 ATVWDN TF ATVEDN TF /0 ATVWDN TG ATVEDN TG / ATVWDN TG ATVEDN TG /0 ATVWDN TG ATVEDN TG () For ATVW... range only. () SoMove setup software : available from 0. Altivar is also supported by Powersuite software workshop. /

34 Altivar 0 00 kw Complex, high-power machines IP Altivar kit with preassembled enclosure Drive Kit ATVHD0N VWA ATVHCN VWA ATVHCN VWA ATVHCN VWA ATVHC0N VWA ATVHCN ATVHCN ATVHC0N With VWA braking unit VWA ATVHCN With VWA braking unit ATVHCN With VWA braking unit ATVHCN Without braking unit VWA ATVHC0N ATVHC0N VWA VWA braking unit VWA Additional empty enclosure (00 mm) VWA0 Additional empty enclosure (00 mm) VWA /

35 Altivar Q 0 0 kw Complex, high-power machines Water-cooled drives for harsh environments Dimensions (in mm) T : 0 x 0 x T : x 0 x T : x x width x height x depth Type of drive Supply voltage Degree of protection V Sideways and front IP - Top IP0 - Bottom IP V Drive Output frequency Hz Type of control Asynchronous motor Flux vector control with or without sensor, voltage/frequency ratio ( or points), ENA System Synchronous motor Vector control without speed feedback Transient overtorque 0% of nominal motor torque for seconds, and % for 0 seconds Speed range 00 in closed loop mode with encoder feedback, 0 in open loop mode Functions Number of functions > Number of preset speeds Number of I/O Analog inputs Logic inputs 0 Analog outputs Logic outputs 0 Relay outputs Safety input Dialogue Remote graphic display terminal, SoMove setup software () Communication Integrated Modbus and CANopen As an option Modbus TCP, Modbus/Uni-Telway, Fipio, Modbus Plus, Profbus DP, Profbus DP V, DeviceNet, EthernetIP, CC-Link, INTERBUS Cards (available as an option) Multi-pump cards, I/O extension cards, Controller Inside programmable card Reduction of current harmonics Optional AC choke, Altivar AFE (Active Front End) EMC filter Integrated C EMC As an option C EMC Motor power kw/hp 0/ ATVQD0N T / ATVQCN T /00 ATVQCN T 0/0 ATVQCN T 00/00 ATVQC0N T 0/00 ATVQCN T /00 ATVQCN T 00/00 ATVQC0N T 00/00 ATVQC0N T 00 V V 0 V KW HP KW 0 ATVQCY T ATVQCY T - 0 ATVQCY T ATVQC0Y T ATVQCY T 0 0 ATVQCY T 0 00 ATVQC0Y T ATVQC0Y T ATVQCY T () SoMove setup software : available during 0. Altivar also works with the PowerSuite software workshop. /

36 Altivar Plus kw Complex, high-power machines Solutions in IP and IP ready-assembled enclosures Dimensions (in mm) width x height x depth ATVEXCC E : 00 x x E : 00 x x E : 00 x x E : 0 x x Type of drive Degree of protection 0 0 V () IP, IP Drive Output frequency 0 00 Hz Speed range Type of control Asynchronous motor Flux vector control with or without sensor, voltage/frequency ratio ( or points), ENA System Transient overtorque Synchronous motor Functions Number of functions > Number of preset speeds Number of I/O Analog inputs Logic inputs 0 Analog outputs Logic outputs 0 Relay outputs Safety input Vector control without speed feedback 0% of nominal motor torque for seconds, and % for 0 seconds 00 in closed loop mode with encoder feedback, 0 in open loop mode Dialogue Remote graphic display terminal, SoMove setup software () Communication Integrated Modbus and CANopen Cards (available as an option) Reduction of current harmonics As an option Modbus TCP, Modbus/Uni-Telway, EtherNet/IP, EtherCAT, DeviceNet, PROFIBUS DP V0 et V, EMC filter Integrated C EMC Equipment As an option INTERBUS, CC-Link. Encoder interface cards, I/O extension cards, Controller Inside programmable card, DC choke or Integrated AC choke, variant pulse, AFE Altivar (Active Front End) External C EMC A wide range of options listed in the catalogue provides add-ons for the standard offer as required. As well as the options listed in the catalogue, it is possible to customise the equipment. Just contact our teams of experts direct. - Water cooling solution - Integration of specific options IP () The Altivar range in ready-assembled enclosure consists of: An ATVH drive A switch and fast-acting fuses An IP remote mounting kit for graphic display terminal () SoMove setup software : available from 0. Altivar is also supported by Powersuite software workshop. 0 V 00 V 0 V kw/hp Dimensions kw Dimensions kw Dimensions 0/ ATVEXCD0N E 0 ATV EXCD0N E / ATVEXCCN E ATV EXCCN E ATV EXCCY E /00 ATVEXCCN E ATV EXCCN E ATV EXCCY E 0/0 ATVEXCCN E 0 ATV EXCCN E 0 ATV EXCCY E 00/00 ATVEXCC0N E 00 ATV EXCC0N E 00 ATV EXCC0Y E 0/00 ATVEXCCN E 0 ATV EXCCN E 0 ATV EXCCY E 0/0 ATVEXCCN E /00 ATVEXCCN E ATV EXCCN E ATV EXCCY E 00/00 ATVEXCC0N E 00 ATV EXCC0N E 00 ATV EXCC0Y E 00/00 ATVEXCC0N E 00 ATV EXCC0N E 00 ATV EXCC0Y E 0 ATVEXCCN E IP offer available up to 000 kw. For ratings above 0 kw, please consult your Customer Care Centre. /

37 Altivar Plus kw Complex, high-power machines Solutions in IP and IP ready-assembled enclosures Dimensions (in mm) width x height x depth ATVEX E : 00 x x E : 00 x x E : 00 x x E : 00 x x E : 00 x x E : 00 x x E : 0 x x E : 0 x x E : 00 x x E : 00 x x IP () 0 V 00 V 0 V Compact floor-standing enclosure kw/hp Dimensions kw Dimensions kw Dimensions 0/ ATVEXCD0N E 0 ATVEXCD0N E / ATVEXCCN E ATVEXCCN E ATVEXCCY E /00 ATVEXCCN E ATVEXCCN E ATVEXCCY E 0/0 ATVEXCCN E 0 ATVEXCCN E 0 ATVEXCCY E 0/0 ATVEXCC0N E 00 ATVEXCC0N E 00 ATVEXCC0Y E 0/00 ATVEXCCN E 0 ATVEXCCN E 0 ATVEXCCY E 0/0 ATVEXCCN E /00 ATVEXCCN E ATVEXCCN E ATVEXCCY E 00/00 ATVEXCC0N E 00 ATVEXCC0N E 00 ATVEXCC0Y E 00/00 ATVEXCC0N E 00 ATVEXCC0N E 00 ATVEXCC0Y E 0 ATVEXCCY E () The IP offer is available for power ratings up to 0 kw. For higher power ratings up to 000 kw, consult your customer care centre. IP () 0 V 00 V 0 V Separate air flow kw/hp Dimensions kw Dimensions kw Dimensions 0/ ATVEXSD0N E 0 ATVEXSD0N E / ATVEXSCN E ATVEXSCN E ATVEXSCY E /00 ATVEXSCN E ATVEXSCN E ATVEXSCY E 0/0 ATVEXSCN E 0 ATVEXSCN E 0 ATVEXSCY E 0/0 ATVEXSC0N E 00 ATVEXSC0N E 00 ATVEXSC0Y E 0/00 ATVEXSCN E 0 ATVEXSCN E 0 ATVEXSCY E 0/0 ATVEXSCN E /00 ATVEXSCN E ATVEXSCN E ATVEXSCY E 00/00 ATVEXSC0N E 00 ATVEXSC0N E 00 ATVEXSC0Y E 00/00 ATVEXSC0N E 00 ATVEXSC0N E 00 ATVEXSC0Y E 0 ATVEXSCY E () The IP offer with separate air flow is available for power ratings up to 0 kw. For higher power ratings up to 000 kw, consult your customer care centre. /

38 Altivar LIFT kw Complex, high-power machines Drives for lifts Dimensions (in mm) width x height x depth without remote graphic terminal T : x x T : 0 x 0 x TA : x x T : 0 x 0 x 0 TB : 0 x 00 x Type of drive Supply voltage V V Degree of protection IP0 for unprotected drives and IP on the upper part Drive Output frequency 0... Hz Type of control Asynchronous motor Flux vector control with or without sensor, voltage/frequency ratio Synchronous motor Vector control with and without speed feedback Transient overtorque 0% of nominal motor torque for seconds, and % for 0 seconds Speed range 00 in closed loop mode with encoder feedback, 0 in open loop mode Functions Number of functions > Number of preset speeds Number of I/O Analog inputs Logic inputs 0 Analog outputs Logic outputs 0 Relay outputs Safety input Dialogue Remote graphic display terminal, SoMove setup software () Communication Integrated Modbus and CANopen As an option Ethernet, PROFIBUS DP, DeviceNet, Uni-Telway, INTERBUS Cards (available as an option) Encoder interface cards, I/O extension cards, Controller Inside programmable card, Encoder emulation card Reduction of current harmonics Integrated DC choke or supplied with the product EMC filter Integrated C EMC up to. kw As an option External C EMC from. kw Motor power kw / HP / A / / ATVLDNZ T, /, / ATVLDNZ T, /, / ATVLDMZ TB, / / ATVLDNZ TA, / / ATVLDMZ TB / / ATVLDNZ TB / / ATVLDMZ T / 0 / ATVLDNZ TB / 0 / ATVLDMZ T / 0 / ATVLDNZ T () SoMove setup software : available from 0. Altivar LIFT is also supported by Powersuite software workshop. /

39 Altivar kw Complex, high-power machines I/O extension and specific cards Type of card Description I/O extension Logic relay logic output ( C/O contact) x VDC positive or negative logic inputs x VDC open collector positive or negative logic outputs input for PTC probes Extended Reference VWA0 VWA0 x 0 0 ma differential current analog input software-configurable voltage (0 VDC) or current (0 0 ma) analog input software-configurable voltage (±V, 0 VDC) or current (0 0 ma) analog inputs relay logic output ( C/O contact) x VDC positive or negative logic inputs x VDC open collector positive or negative logic outputs, input for PTC probes, frequency control input "Controller Inside" programmable card Type of card Description Reference Programmable Controller Inside logic inputs, of which can be used for counters or of which can be used for incremental encoders analog inputs, logic outputs, analog outputs, a master port for the CANopen bus, a PC port for programming with the PS software workshop VWA0 /

40 Encoder interface cards Type of card Encoder interface with Differential outputs (RS) Open collector outputs (NPN) Push-pull outputs Operating frequency 00 khz Reference V VWA0 V VWA0 VWA0 V VWA0 VWA0 VWA0 V VWA0 Type of card () Resolver Universal Sincos Absolute Incremental with emulation Speed feedback resolution bits bits bits,000 Encoder type supported Resolver with,, or poles "SinCos, SinCosHiperface Sincos Absolute "Incremental RS - V or V" EnDat, SSI" References VWA0 VWA0 VWA VWA Supported by Altivar LIFT and Altivar with S firmware version /

41 Accessories Options Selection guide For Altistart and Altivar range Communication tools Remote display terminal (IP & IP) Remote graphic display terminal Multi-loader Simple Loader Dongle Bluetooth (TM) Altistart 0 Altistart x x Altistart x Altivar x x x x Altivar x x x x x Altivar x x x x x Altivar C x x x Altivar x x x x Altivar LIFT x x x x Altivar x x x x Altivar x x x x Altivar Plus x x x x Altivar Plus x x x x Altivar Q (Water Cooled) x x x x Altivar Q (Water Cooled) x x x x Accessories & Options ALTISTART ALTIVAR 0 C LIFT Plus Plus Q Q Panel cut-out adaptor for mounting control unit at 0 x Ferrite suppressors for downstream contactor opening x x x x Additional EMC filter x x x x x x x x x x x x x x x x Passive filters x x x x x x x x Sinus filters x x x x x x x x Line choke x x x x x x x x x x x x x Motor chokes x x x x x x x x x x x x x x x EMC conformity kit x x UL Type conformity kit x x x Mechanical base kit for mounting GV circuit-breaker x Mounting plates x x x x x x x x x Braking resistors for vertical movements x x Braking resistors and braking units x x x x x x x x x x x x x x References If options or accessories not listed, please refer to the Schneider Electric catalogue. For Altivar 00 or 0, please consult our Customer Care Centre. /0

42 Industrial protocols ALTISTART ALTIVAR 0 C LIFT Plus Plus Q Q 00 0 Canopen CANopen Daisy chain CC-Link DeviceNet Δ EtherCAT Ethernet Δ Ethernet IP Ethernet TCP/IP Fipio INTERBUS S Modbus Modbus Plus Modbus TCP Modbus/ Unitelway PROFIBUS DP Δ PROFIBUS DP V0 PROFIBUS DP V References HVAC protocols Please refer to the Schneider Electric catalogue or consult our Customer Care Centre. ALTISTART ALTIVAR 0 C LIFT Plus Plus Q Q 00 0 Lonworks Metasys N Apogee FLN BACnet References Embedded Option Δ Gateway Please refer to the Schneider Electric catalogue or consult our Customer Care Centre. Communication modules Altistart /Altivar starters/drives Ethernet/ Modbus DeviceNet/ Modbus Fipio/Modbus PROFIBUS DP/Modbus Parameter setting Standard configurator ABC configurator program References Bridge TSXETG0 Gateway LUFP LUFP LAP0 LUFP Cable references L = 0. m VWA0R0 VWA0R0 VWA0R0 L = m VWA0R VWA0R VWP00R VWA0R L = m VWA0D0 VWA0R0 VWA0R0 VWA0R0 /