Keysight Technologies DCA Accessories. Technical Overview

Transcription

1 Keysight Technologies DCA Accessories Technical Overview

2 0 Keysight DCA Accessories - Technical Overview N07A-45A Accessory Kit for Remote Head Modules Kit consists of: Quantity Part number N07A-PB 90C N9398G N550A N550B N07A-C N07A-AC Description 0.57 Nm (5 lb-in) torque wrench Remote head brackets.4 mm male to 3.5 mm female adapter.85 mm DC block, 700 khz to 67 GHz.85 mm male-to-male adapter.85 mm female-to-female adapter.85 mm cable ESD wrist strap ESD ground cord Accessory case Remote head brackets (N07A-PB) ESD wrist strap ( )ESD ground cord ( ).85 mm male-to-male adapters (N550A) 0 cm coax cables,.85 mm male-tomale (N07A-C).85 mm female-to-female adapters (N550B).4 male to 3.5 female adapters (90C).85 mm DC blocks (N9398G) 5 lb-in torque wrench (870-58) N07A-46A Accessory Kit for Remote Head Modules Quantity 4 Part number 90C 90A 9E 9G N N9398G N Description Adapter,.4 mm male to 3.5 mm female.0 (m) to.0 (m) adapter.0 (m) to.85 (m) adapter.0 (m) to.85 (f) adapter Bracket, remote head probe Torque wrench 5/6 in (5 in-lbs) Torque wrench 6 mm (4 in-lbs) ESD ground cord ESD wrist strap Coaxial cable,.85 mm connectors, 00 mm.85 mm DC block 6V 700 khz to 67 GHz Accessory case for N046A demo kit

3 03 Keysight DCA Accessories - Technical Overview TDR Calibration Part number 85058B 85058E 85056A 85056D N04B Description Standard mechanical calibration kit, DC-67 GHz, for.85 mm applications Economy mechanical calibration kit, DC-67 GHz, for.85 mm applications Standard mechanical calibration kit, DC-50 GHz, for.4 mm applications Economy mechanical calibration kit, DC-50 GHz, for.4 mm applications Mechanical calibration kit for 3.5 mm applications N4694A-HFF DC-67 GHz Electronic calibration module with female.85 mm connectors N4694A-HMF DC-67 GHz Electronic calibration module with one male and one female.85 mm connector N4694A-HMM DC-67 GHz Electronic calibration module with male.85 mm connectors 85058E N07A-34F N07A-34M N07A-54F N07A-54M Accessory kit for 35 GHz N055A-3F/34F TDR/TDT module Accessory kit for 35 GHz N055A-3M/34M TDR/TDT module Accessory kit for 50 GHz N055A-5F/54F TDR/TDT module Accessory kit for 50 GHz N055A-5M/54M TDR/TDT module. Directly connects to N055A-5M/54M remote heads.. Directly connects to N055A-5F/54F remote heads. N07A-54F N07A-### quantities 34F 34M 54F 54M Part number Description N DC-67 GHz Electronic calibration module with male.85 mm connectors N DC-67 GHz Electronic calibration module with female.85 mm connectors mm male to 3.5 mm female adapter mm female to 3.5 mm male adapter mm male to 3.5 mm male adapter mm female to 3.5 mm female adapter mm male-to-male adapter mm female-to-female adapter ESD wrist strap ESD ground wire Bracket for remote head nm (8 lbs-in) torque wrench, 0 mm nm (8 lbs-in) torque wrench, 5/6 inch USB cable (part of ECal) mm male short mm male open mm male load mm female short mm female open mm female load N07A-AC Accessory case N07A-3AC Accessory case N07A-4AC Accessory case N07A-5AC Accessory case

4 04 Keysight DCA Accessories - Technical Overview Clock Recovery Phase Matching Cable Kits N076A-CR electrical clock recovery phase matching kit (Ordered separately as N07A-76A) This kit provides specially matched cables that will minimize (align) clock-to-data delays and ensure accurate jitter measurements when using the N076A external clock recovery (or recovering clocks from electrical signals with the N077A). It is designed for the following DCA configuration: a DCA-X mainframe with Option PTB, the N076A external clock recovery module and the N045A 60 GHz electrical module, N046A 75/85/00 GHz electrical module and/or N055A 50 GHz TDR module. Quantity Part number Description N07A-3C Coaxial cable,.9 mm (m) to.9 mm (m), 0.55m length N07A-3C Coaxial cable,.9 mm (m) to.9 mm (m), m length N07A-DC Delay-line assembly, 8. ns N07A-P Microwave pick-off tee,.4 mm connectors, matched pair N07A-EQ6 Microwave equalizer, 0.5 to 8 GHz, 6 db negative slope, SMA N07A-EQ9 Microwave equalizer, 0.5 to 8 GHz, 9 db negative slope, SMA T-0 Torx screwdriver T-0 Torx screwdriver Torque wrench, 8 lb-in, 5/6 Inch N076B-CR electrical clock recovery phase matching kit (Ordered separately as N07A-76B) This kit provides specially matched cables that will minimize (align) clock-to-data delays and ensure accurate jitter measurements when using the N076B external clock recovery (or recovering clocks from electrical signals with the N078A). It is designed to be used with a DCA-X mainframe with an internal precision timebase plus any N045A/N046A/N055A module. Quantity Part number Description N07A-P8 Microwave Pick-Off Tee.85 mm connectors, matched pair N07A-EQ6 Equalizer,.9 mm (m) to.9 mm (f), 6 db N07A-EQ9 Equalizer,.9 mm (m) to.9 mm (f), 9 db N07A-EQ3 Equalizer,.9 mm (m) to.9 mm (f), 3 db N SMA delay line, 8. ns N Set of.9 mm delay lines,.37 ns matched pair plus 4.33 ns matched pair T-0 Torx screwdriver T-0 Torx screwdriver Torque wrench, 8 lb-in, 5/6 Inch

5 05 Keysight DCA Accessories - Technical Overview Clock Recovery Phase Matching Cable Kits (Continued) N077A-CR optical clock recovery phase matching kit (Ordered separately as N07A-77A) This kit provides specially matched cables that will minimize (align) clock-to-data delays and ensure accurate measurements when using the N077A external clock recovery. It is designed to be used with a DCA-X mainframe with Option ETR/PTB installed (with any DCA plug-in module) or any N09x Series DCA-M product. Quantity Part number Description N FC/PC optical cable, 50/5 µm (multimode),.0 m length N FC/PC optical cable, 50/5 µm (multimode),.6 m length N FC/PC optical cable, 50/5 µm (multimode), 4.75 m length N FC/PC optical cable, 9/5 µm (single-mode),.0 m length N FC/PC optical cable, 9/5 µm (single-mode), 3.5 m length N FC/PC optical cable, 9/5 µm (single-mode), 5.6 m length N Coaxial cable,.9 mm (m) to.9 mm (m), m length N Coaxial cable,.9 mm (m) to.9 mm (m), in. length N07A-EQ6 Microwave equalizer, 0.5 GHz to 8 GHz, 6 db, negative slope, SMA N07A-EQ9 Microwave equalizer, 0.5 GHz to 8 GHz, 9 db, negative slope, SMA N078A-CR optical clock recovery phase matching kit (Ordered separately as N07A-78A) This kit provides specially matched cables that will minimize (align) clock-to-data delays and ensure accurate measurements when using the N078A external clock recovery. It is designed to be used with a DCA-X mainframe with an internal precision timebase plus any optical DCA plug-in module, or with any N09x Series DCA-M product. Quantity Part number Description N07A-EQ6 Equalizer,.9 mm (m) to.9 mm (f), 6 db N07A-EQ9 Equalizer,.9 mm (m) to.9 mm (f), 9 db N Coaxial cable,.9 mm (m) to.9 mm (m), m length N Coaxial cable,.9 mm (m) to.9 mm (m), 0.3 m length N FC/PC optical cable, 9/5 μm (single-mode),.0 m length N FC/PC optical cable, 9/5 μm (single-mode), 5.0 m length

6 06 Keysight DCA Accessories - Technical Overview Adapters and Connector Savers Description below specifies gender of adapter Part number 90A 90B 90C 9E 9F 9G 9H Y900B Y90B Y903B Description.0 male to.0 male adapter.0 female to.0 female adapter.0 male to.0 female adapter.0 male to.85 male adapter.0 female to.85 female adapter.0 male to.85 female adapter.0 female to.85 male adapter Ruggedized.0 mm female to.0 mm female adapter Ruggedized.0 mm female to.85 mm female adapter Ruggedized.0 mm female to.9 mm female adapter 900B Y90B N550A N550B N550C.85 mm male to.85 mm male adapter/connector saver.85 mm female to.85 mm female adapter/connector saver.85 mm female to.85 mm male connector saver 90C 900A.4 mm male to.4 mm male adapter/connector saver 900B.4 mm female to.4 mm female adapter/connector saver 900C.4 mm female to.4 mm male connector saver 90A.4 mm male to 3.5 mm male adapter, 90B.4 mm female to 3.5 female adapter, 90C.4 mm male to 3.5 mm female adapter, 90D.4 mm female to 3.5 mm male adapter, 903A.4 mm male to type-n male adapter, 903B.4 mm female to type-n female adapter, 903C.4 mm male to type-n female adapter, 903D.4 mm female to type-n male adapter, 904A.4 mm male to.9 mm male adapter, 904B.4 mm female to.9 female adapter, 904C.4 mm male to.9 mm female adapter, 904D.4 mm female to.9 mm male adapter, F -3.5 M mm female to 3.5 mm male NMD bulkhead adapter, 83059A 3.5 mm male to 3.5 mm male adapter/connector saver 83059B 3.5 mm female to 3.5 mm female adapter/connector saver 83059C 3.5 mm female to 3.5 mm male connector saver mm male bulkhead to female 3.5 mm/sma adapter mm connectors are mechanically compatible with.85 mm...9 mm connectors are mechanically compatible with 3.5 mm and SMA connectors. Examples Use two 90Cs to connect SMA cables to an N045A-0F or 8608B-HBW or N4903B. Use as a connector saver for the 86A, 54754A or 8605X electrical inputs. Use 900A plus , plus N0B, plus 43A to connect InfiniiMax II probes with the N045-0xF.

7 07 Keysight DCA Accessories - Technical Overview DC Blocks, Phase Trimmers, Cables, Caps Part number Description N9398G.85 mm male-to-female DC block 6 V 700 khz to 67 GHz N9398F.4 mm male-to-female DC block 6 V 50 khz to 50 GHz N9398C 3.5 mm male-to-female DC block 6 V 50 khz to 6.5 GHz N07A-PT.4 mm male-to-female phase trimmer, range > ps, IL 0.8 db at 50 GHz N07A-PT3 SMA female-to-female, range > 53 ps, IL 0.8 db at 6 GHz N07A-C.85 mm coaxial male-to-male cable, 67 GHz, 0 cm 500J.0 mm female-to-male cable, 6 cm, DC-0 GHz N07A-3C Cable RF,.9 mm, M/M,.37 ns delay, 0.55 m N07A-3C Cable RF,.9 mm, M/M, 4.33 ns delay, m N07A-3C3 Cable RF, SMA, M/M, Data Out/Data In for N076A/B N9398F 500J N07A-CF Shipping cap to protect.85/.4 mm female inputs N07A-CM Shipping cap to protect.85/.4 mm male inputs N07A-3CF Shipping cap to protect.9/3.5 mm female inputs N07A-3CM Shipping cap to protect.9/3.5 mm male inputs N07A-PT..4 mm connectors are mechanically compatible with.85 mm...9 mm connectors are mechanically compatible with 3.5 mm and SMA connectors. Example The N045A-04F requires four N07A-CF caps, the N055A-3M requires two N07A-3CM caps. Pick-offs, Equalizers Part number N07A-P N07A-P N07A-P3 N07A-P8 Description Microwave Pick-Off Tee.0 mm connectors, matched pair Microwave Pick-Off Tee.4 mm connectors, matched pair Microwave Pick-Off Tee.9 mm connectors, matched pair Microwave Pick-Off Tee.85 mm connectors, matched pair N07A-P8 N07A-EF6 N07A-EQ3 N07A-EQ6 N07A-EQ9 Equalizer, 6 db,.9mm (m/f), up to 56 GBd Equalizer,.9 mm (m) to.9 mm (f), 3 db Equalizer,.9 mm (m) to.9 mm (f), 6 db Equalizer,.9 mm (m) to.9 mm (f), 9 db

8 08 Keysight DCA Accessories - Technical Overview Attenuators, Terminations Part number Description 8493C mm 3 db attenuator 8493C mm 6 db attenuator 8493C mm 0 db attenuator 8493C mm 0 db attenuator 8493C 8490D mm 3 db attenuator 8490D mm 6 db attenuator 8490D-00.4 mm 0 db attenuator 8490D-00.4 mm 0 db attenuator 8490D 909D mm female 50 Ω load 909D mm male 50 Ω load mm male short 909D A 8538B.4 mm male 50 Ω load.4 mm female 50 Ω load 8538A 8540A 8540B.4 mm male short.4 mm female short 854A 854B.4 mm male open.4 mm female open 8540B Power Dividers, Splitters Part number 636B 636C Description 3.5 mm power divider, DC to 6.5 GHz.4 mm power divider, DC to 50 GHz 667B 667C 3.5 mm power splitter, DC to 6.5 GHz.4 mm power splitter, DC to 50 GHz

9 09 Keysight DCA Accessories - Technical Overview Storage See also Part number Description N Front cover for DCA-X mainframe N07A-AC Accessory case N07A-AC Empty N07A-54F accessory case N07A-3AC Empty N07A-54M accessory case N07A-4AC Empty N07A-34F accessory case N07A-5AC Empty N07A-34M accessory case N07A-MC Module storage case for N045A module N07A-3MC Module storage case for N055A module N07A-CL Clip for two N045A cables N07A-CL Clip for two N045A or N055A remote heads N07A-PB Bracket for one N045A or N055A remote head N N07A-MC/3MC Module filler panel for 8600A/B/C/D (quartz gray, /4 bay width) 3, 4 N07A-AFP Module filler panel (/4 bay width, carbon black) 3, 4. Does not fit 8600A/B/C mainframes.. Empty N07A-45A case (see photo on page ). 3. Use filler panels to ensure proper airflow through the inside of modules. Otherwise the movement of air may be cut short, and components may overheat in hot environments. 4. DCA-X mainframes always ship with two filler panels to fill two slots. Mini-modules ship with one filler panel. N07A-CL N07A-CL ESD Protection Part number N9355CK0 Description 3.5 mm DC coupled limiter ESD heel strap ESD wrist strap ESD ground cord ESD desk mat

10 0 Keysight DCA Accessories - Technical Overview Rackmount Kits, Tools Part number CM030A CP08A Description Rackmount kit for 8600A/B/C Rackmount kit with handles for 8600A/B/C CM05A CP00A Rackmount kit for 8600D Rackmount kit with handles for 8600D CM5A CP0A Rackmount kit-.5h without handles, phantom gray Rackmount kit-.5h with handles, phantom gray Bulkhead Connector saver N07A-RM N07A-RM Single DCA-M rackmount kit Dual DCA-M side by side rackmount kit mm holding wrench mm holding wrench nm (5 lbs-in) torque wrench nm (8 lbs-in) torque wrench nm (8 lbs-in) torque wrench nm (4 lbs-in) torque wrench 6. To hold.9/3.5/sma adapters and interfaces while torqueing a connector to them.. To hold.0 mm adapters and interfaces while torqueing a connector to them. 3. Recommended for.85/.4 mm DCA connectors (e.g. N045A, 866C, 868A). 4. Recommended for 3.5 mm DCA connectors (e.g A, 8605x, 86A). 5. Recommended for DCA bulkheads (e.g. 8600x trigger input, 54754A, 8605x, 86A). 6. Recommended for.0 mm DCA connectors (e.g., N046A).

11 Keysight DCA Accessories - Technical Overview InfiniiMax III/III+ Probing System Overview Probe amps 6 to 30 GHz (InfiniiMax III) 4 to 0 GHz (InfiniiMax III+) with InfiniiMode Industry s highest fidelity and accuracy Bandwidth upgradable (InfiniiMax III) InfiniiMax III probe amps (N800A-03A) 6 GHz, 0 GHz, 5 GHz, 30 GHz InfiniiMax III+ probe amps (N830A-3A) 4 GHz, 8 GHz, 3 GHz InfiniiMax III/III+ probe heads and accessories N838A 5 GHz PCB ZIF probe tips (for use with N5439A) N5439A ZIF probe head N5440A 8 GHz 450 Ω ceramic tips N5447A 8 GHz 00 Ω ceramic tips N5445A 30 GHz browser N544A 6 GHz solder-in probe head N5444A.9 mm/3.5 mm/sma 8 GHz probe adapter N836A 6 GHz solder-in probe head N848A InfiniiMax III 6 GHz QuickTip head InfiniiMax III probe adapters N5477A Sampling oscilloscope adapter N5449A Hi-impedance probe adapter N544A Precision BNC 50 Ω adapter N5443A Performance verification and deskew fixture

12 Keysight DCA Accessories - Technical Overview Using InfiniiMax III Probe with DCAs For directly connecting to any DCA module with a 3.5 mm bulkhead connector: Use N5477A sampling oscilloscope adapter to InfiniiMax III probes. For directly connecting to any DCA module with a.4 mm bulkhead connector: Use N0B plus mm (f) to 3.5 mm (m) NMD adapter. For directly connecting to any DCA remote head with an.85 or.4 mm female input, use N5477A plus female bulkhead to 3.5 mm female adapter plus 90A 3.5 mm male to.4 mm male adapter. For modules that do not have built-in probe power: Add an 43A probe power supply with Option 00. N5477A plus InfiniiMax III N803A probe provides 30 GHz bandwidth. Oscilloscope channel connection (NMD/3.5 mm) Power cord 43A Probe amplifier connection N5477A sample oscilloscope adapter for InfiniiMax III. Using InfiniiMax I/II Probe with DCAs Required accessories and instruments: For directly connecting to any DCA module with a 3.5 mm bulkhead connector: N0B. For directly connecting to any DCA module with a.4 mm bulkhead connector: N0B plus For modules that do not have built-in probe power: A\dd an 43A probe power supply with Option 00. E655C performance verification and deskew fixture for probe calibration and performance verification. Typical 34A configuration for 867A Quantity Part number Description 34A 7 GHz probe amp E669A Differential connectivity kit N0B Probe adapter to 3.5 mm adapter 43A Probe power supply Option 00 5-foot power extension cable E665C Calibration/deskew fixture

13 3 Keysight DCA Accessories - Technical Overview N0B 8 GHz Differential TDR/TDT Probe Kit Quantity Description Replacement Differential TDR probe Pair of matched cables ( m) N SMA short (m) SMA load 50 Ω (m) SMA adapter (f-f) Adapter to positioners (includes two.5 mm screws and N one Allen wrench) ESD wrist strap ESD wrist strap ground cord ESD warning label stickers User s Guide (either printed or on CD) Box with foam insert

14 4 Keysight DCA Accessories - Technical Overview Optical Interfaces DCA modules (860XX, 86XX, 83496X, N07XX) Have removable connector interfaces Ship with 8000FI FC/PC pre-installed Compatible with 8000xI interfaces shown here (sold separately) Internal fiber tip is mini HMS-0 ferrule Requires patchcords with straight physical contact (DIN, E000, FC/PC, LC, MU, SC, or ST connector) Easy to clean just unscrew the connector interface 8000FI FC/PC (Ships standard with all optical inputs on modules for the DCA family) 8000LI LC 8000KI SC 8000HI E MI MU 8000SI DIN408/ VI ST

15 5 Keysight DCA Accessories - Technical Overview Training Tools and Devices Available from Part number Description N TDR/TDT, equalization and de-embedding demo board

16 6 Keysight DCA Accessories - Technical Overview Appendix: DCA Input Connectors Product Probe power 3.5 mm.4 mm.9 mm.85 mm.00 mm Optical Comment 54754A Yes f/f CS 83496B No f/f CS FC/PC nut 8600C/D No f/f CS Trigger input 8605C No f/f CS FC/PC nut 8605D No f/f CS f/f CS FC/PC nut.4 mm for option A No f/f CS f/f CS.4 mm only on 40 GHz input 8608A Yes f/f CS 8608B Yes f/f CS f/f CS.4 mm only on 50 GHz input 86A Yes f/f CS 865D No FC/PC nut 866C No m fixed FC/PC nut 867A No f/f CS 868A No f fixed N045A-xxF No f fixed N045A-xxM No m fixed N046A-xxF f fixed Includes.0/.85 mm adapter(s) N055A-3xF No f fixed N055A-3xM No m fixed N055A-5xF No f fixed N055A-5xM No m fixed N076A/76B No f fixed N077A/78A No f fixed FC/PC N090A No f SMA FC/PC N09A/B/D No FC/PC N09C/E No f/f CS FC/PC N094A/B No f/f CS Option 030 includes.4/.9 mm adapters f/f CS m/m CS f fixed m fixed FC/PC nut f SMA FC/PC DCA-M clock Female/female connector saver (bulkhead is male, customer can remove connector saver) Male/male connector saver (bulkhead is female, customer can remove connector saver) Female fixed interface Male fixed interface 8600FI straight FC/PC interface (customer can exchange it with interfaces, see Optical Interfaces in the Technical Overview on Female SMA input (fixed) Cleanable FC/PC adapter Use.9 or 3.5 mm cables to provide clocks to the N090X, N09X and N094X DCA-M oscilloscopes

17 7 Keysight DCA Accessories - Technical Overview Appendix: RF/Microwave Connectors 3.5 mm connector The 3.5 mm connector was primarily developed at Hewlett Packard (now Keysight Technologies, Inc.) with early manufacturing at Amphenol. Its design strategy focused on highly-rugged physical interfaces that would mate with popular SMA dimensions, allowing thousands of repeatable connections. It is mode-free to 34 GHz..9 mm connector The.9 mm connector mates with SMA and 3.5 mm connectors and offers mode-free performance to 40 GHz..4 mm connector The.4 mm connector was developed by Hewlett Packard, Amphenol, and M/A-COM for use to 50 GHz. This design eliminates the fragility of the SMA and.9 mm connectors by increasing the outer wall thickness and strengthening the female fingers. It can mate with SMA, 3.5 mm and.9 mm, with the use of precision adapters. The.4 mm product is offered in three quality grades: general purpose, instrument, and metrology. General-purpose grade is intended for economy use on components, cables, and microstrip where limited connections and low repeatability is acceptable. Instrument-grade is best suited for measurement applications where repeatability and long life are primary considerations. Metrology-grade is best suited for calibration applications where the highest performance and repeatability are required..85 mm connector The.85 mm connector was developed in the mid-980s by Hewlett Packard (now Keysight Technologies, Inc.) for mode-free performance to 65 GHz. Hewlett Packard offered its design as public domain in 988 to encourage standardization of connector types; a few devices are available from various manufacturers for research work. The.85 mm connector mates with the.4 mm connector and has the same ruggedness. In recent years, the.85 mm connector has been optimized to operate mode-free to 67 GHz. Appendix: Literature References Publication title Infiniium DCA-X 8600D Wide-Bandwidth Oscilloscope Mainframe and Modules - Data Sheet ( RF and Microwave Test Accessories Catalog 0/03 - Catalog ( Publication number EN EN Using the Keysight N5477A Sampling Oscilloscope Adapter N This information is subject to change without notice. Keysight Technologies, Published in USA, May 9, EN