2016 ROTRONIC AG Bassersdorf Switzerland RMS CONVERTER

Size: px

Start display at page:

Download "2016 ROTRONIC AG Bassersdorf Switzerland RMS CONVERTER"

Jason Peters
5 years ago
Views:

1 2016 ROTRONIC AG Bassersdorf Switzerland RMS CONVERTER

2 Table of Contents 1 Overview RMS system overview RMS Converter Power Supply Interface Device dimension Installation Default configuration Configuration via web interface Configuration via RMS CONFIG Software Integration of the RMS Converter (Pairing) into the RMS WEB Software Add devices via RMS Converter Firmware-Update RMS-Converter Firmware Update via RMS Software Firmware Update per RMS-CONFIG Tool Technical Specification Further documents Document Version ROTRONIC AG Bassersdorf Switzerland Page 2 of 39

3 Scope: This manaul is related to the RMS-Converter Firmware Version V1.2. The small digit represents small changes, bug fixes etc. that do not influence main functions of the device. 1 Overview 1.1 RMS system overview The Rotronic Monitoring System RMS is a network of various devices and RMS server software. The software represents the core piece of the whole RMS. It collects measuring and system data of the devices and stores it into the database. The single devices work as input modules (datalogger) and output moduls (displays, analog outputs, switching outputs. The user can monitor this measuring- and system data by PC, laptop or smart mobiles everywhere and every time. Figure 1: Schematic diagram of the RMS 2016 ROTRONIC AG Bassersdorf Switzerland Page 3 of 39

4 1.2 RMS Converter The aim of the RMS Converter is to provide a simple integration of Rotronic devices and networks of earlier generation into the RMS. The RMS Converter acts as a adaptation between these devices an the RMS - by translation of the propriatary device protocolls to the RMS and back. By this way, measuring- and system are exchanged between devices and RMS. In case of communication interruption between RMS Converter and server software, the converter loggs the collected data into the internal memory (for max. 1 week). As far as the connection is completed again, the data will be synchronized between converter and server. In this manner data loss will be avoided. Beside the Rotronic device integration, the RMS Converter provides the following main function: o Direct integration of digital OEM devices into the RMS o Upgradeable for custom-built software- or device function o FW Update 1.3 Power Supply The RMS Converter is power supplied by a switching power supply 5VDC. It is part of the supplied package. 1.4 Interface The communication of the RMS Converter run via LAN and needs no further interface or plug ROTRONIC AG Bassersdorf Switzerland Page 4 of 39

5 2 Device dimension Figure 2: Device dimension 2016 ROTRONIC AG Bassersdorf Switzerland Page 5 of 39

3 Installation To install the RMS Converter, it is necessary to connect the LAN port to the ethernet network and energize it with the power supply. 3.

6 3 Installation To install the RMS Converter, it is necessary to connect the LAN port to the ethernet network and energize it with the power supply. 3.1 Default configuration The RMS Converter is default configured with DHCP active. That means that the RMS Converter gets the IP-address from the DHCP-Server automatically. Fix IP address can be set by a manual configuration via the web browser or via the RMS CONFIG Software see following chapter. 3.2 Configuration via web interface To configure the RMS Converter please type into the address bar of the web browser. Instead of "XXXXXXXX" please use the serial number (see the bottom side of the RMS Converter) Figure 3: Configuration of the RMS Converter via web interface As far as the RMS Converter is configured with a fix IP address, the device can be accessed typing into the web browser (in the expample of Fig. 3 -> ROTRONIC AG Bassersdorf Switzerland Page 6 of 39

rotronic.com/rms/downloads-rms For configuration please follow the figures below.

7 3.3 Configuration via RMS CONFIG Software The RMS Converter can also be configured by the RMS CONFIG Software. The RMS CONFIG is a configuration software tool that can be downloaded at For configuration please follow the figures below. Figure 4: Search for network devices Figure 5: Choose the RMS Converter 2016 ROTRONIC AG Bassersdorf Switzerland Page 7 of 39

8 After clicking <Add> it appears the following window: Figure 6: Settings of the RMS Converter Modus Figure 7: Modus - for the use of the Rotronic Cloud Server 2016 ROTRONIC AG Bassersdorf Switzerland Page 8 of 39

See user manual E-IM-RMS-WEB If the configuration is finished, the RMS Converter can be integrated into the RMS server software for further information please see the manual E-SM-RMS-WEB.

9 Figure 8: Modus - for the use of a local server In case of local server, the IP address or link of the local server must be entered at IP. Settings Figure 9: Service path In case of local server the WebService path must be adapted to the local settings of the local server. See user manual E-IM-RMS-WEB If the configuration is finished, the RMS Converter can be integrated into the RMS server software for further information please see the manual E-SM-RMS-WEB. For a successful integration of the RMS Converter into the RMS System, the port 80 of the network must be opened. The RMS Converter must be able to send data to the RMS server (local or cloud) Case of DHCP active: A DHCP server must supply an IP address automatically. Case of Fix IP: If no DHCP server is used, a fixed IP address can be set for the RMS Converter by the network administrator manually ROTRONIC AG Bassersdorf Switzerland Page 9 of 39

3.4 Integration of the RMS Converter (Pairing) into the RMS WEB Software

Login into the RMS Software -> Tools -> Setup -> Devices -> New -> LAN

Converter and click <OK> 3 Figure 11: Enter the serial number Click the

10 3.4 Integration of the RMS Converter (Pairing) into the RMS WEB Software Integration of a RMS Converter into RMS (Paring) in 7 steps as follows: Login into the RMS Software -> Tools -> Setup -> Devices -> New -> LAN device 1 Figure 10: Add new LAN device Type the serial number of the RMS Converter and click <OK> 3 Figure 11: Enter the serial number Click the link 4 Figure 12: Click the link 2016 ROTRONIC AG Bassersdorf Switzerland Page 10 of 39

Click <Pair> and change back to the browser tab Devices RMS Setup 5

intervall, group) 6 Figure 14: Further configuration The configuration

7 Figure 15: Finish of the integration For details of the RMS server

11 Click <Pair> and change back to the browser tab Devices RMS Setup 5 Figure 13: Click Pair Configure the device further (device name, intervall, group) 6 Figure 14: Further configuration The configuration / integration of the RMS Converter is finished. 7 Figure 15: Finish of the integration For details of the RMS server software please see the user manual E-SM-RMS-WEB 2016 ROTRONIC AG Bassersdorf Switzerland Page 11 of 39

12 3.5 Add devices via RMS Converter Please click Tools -> Setup Please click the RMS Converter within the device list -> Devices -> Add/Search Figure 16: Dialog window after device search Select your device to implement Figure 17: List of selectable devices 2016 ROTRONIC AG Bassersdorf Switzerland Page 12 of 39

13 The RMS Converter is able to integrate the following devices into the RMS System: Rotronic devices (earlier generation): This devices group contains HF4, HF5, HF6, HF8, HLNT, PF4/5, CRP5, HL-RC (GP FlexGate2 433MHz, GP FlexGate2 US 915MHz) AF1 (RS485) via AC3011 Masterbox BF2 (RS485) via AC3011 Masterbox 3rd party devices: This devices group contains Airy P231 Particle counter Lighthouse ApexR5 Particle counter RMS-8ADC-L-R-A The RMS Converter integrates these devices based on existing networks as ethernet, RS485 and RF Add HF4, HF5, HF6, HF8 Network configuration of the device To add one of these devices into the RMS, it is necessary to discover the individual network configuration of the device as DHCP active / not active (fix IP address) Host name To find and configure the network settings of the device, please connect the device into the LAN and use the Digi Device Discovery Tool. (Download: ROTRONIC AG Bassersdorf Switzerland Page 13 of 39

14 Open and execute DigiDeviceDiscovery.exe -> Device search starts automatically. Figure 18: Digi Device Discovery Tool - device list Double click on the device and login -> a web browser opens (default username: rotronic / default password: wlan) Figure 19: Login Digi Modul Check/change DHCP, Hostname, IP address For further information see the short manual of the Digi Device Discovery tool 2016 ROTRONIC AG Bassersdorf Switzerland Page 14 of 39

15 Add into the RMS Web Software Click on Tools -> Setup Choose RMS Converter -> Click Add/Search at Devices Select AirChip3000 (See following figure) and click Search Device Figure 20: Device search AirChip family It is possible to type the IP address or host name into the field IP address. It makes the search a bit faster. It appears the device (device name, serial number, IP address) and it's settings 2016 ROTRONIC AG Bassersdorf Switzerland Page 15 of 39

16 Please configure now the device (name, measurement probes, input/output/relais settings etc. see the following figure for HF8 exemplarily). Figure 21: RMS device settings of a HF8 via RMS Converter The device is added now - see following figure Figure 22: Confirmation of the added device 2016 ROTRONIC AG Bassersdorf Switzerland Page 16 of 39

17 3.5.2 Add CRP5 Network configuration of the device CRP5 is only available with fix IP address. Before you add it into the RMS web software, it is necessary to check/change the fixed device IP address. That is possible using the device keys and display or using a service cable (AC3006) and the HW4 SW. Add into the RMS Web Software Same procedure as for HF4, 5, 6, 8 (chapter before) Add PF4/5 Network configuration of the device The device is configurable with DHCP (default) or fix IP address. Please check/change the setup using the device keys and display. For the device version without keys/display but with ethernet plug, a service cable (AC3006) and the HW4 SW is necessary to check/change the device network settings. Add into the RMS Web Software Same procedure as for HF4, 5, 6, 8 (chapter before) 2016 ROTRONIC AG Bassersdorf Switzerland Page 17 of 39

18 3.5.4 Add HL-NT (HygroLogNT) Network configuration of the device Same procedure as for HF4, 5, 6, 8 Add into the RMS Web Software Click on Tools -> Setup Choose RMS Converter -> Click Add/Search at Devices Select AirChip3000 (See following figure) and click Search Device Figure 23: Select HL-NT 2016 ROTRONIC AG Bassersdorf Switzerland Page 18 of 39

19 Please configure now the device (name, measurement probes, input/output/relais settings etc. see the following figure). Figure 24: RMS device settings of a HL-NT via RMS Converter 2016 ROTRONIC AG Bassersdorf Switzerland Page 19 of 39

20 3.5.5 Add HL-RC (GP FlexGate2 433 and 915 MHz RF) Network configuration of the device To setup the ethernet configuration please Open the HW4 SW Search for master devices -> Search for wireless logger -> Adapters -> Search Set DHCP or fix IP addresses etc. Add into the RMS Web Software Click on Tools -> Setup Choose RMS Converter -> Click Add/Search at Devices Select HL-RC (See following figure) and click Search Device Figure 25: Select HL-RC Follow the same procedure as for the device above to configure the device properties (name, measurement probes etc.) 2016 ROTRONIC AG Bassersdorf Switzerland Page 20 of 39

21 3.5.6 Add RMS-8ADC-L-R-A Network configuration RMS-8ADC-L-R-A is a device using only a fix IP address. Remark: For the first configuration or for a reset of the default settings of the device, please Setup a point to point ethernet connection between the RMS-8ADC-L-R-A and a PC using a ethernet cable. Change the IP settings of the PC (network adapter settings IP4 ) as follows Figure 26: Fix IP address of the PC Press the button for app. 10seconds until the LED blinks short. Open a web browser and type (the default IP address is ) 2016 ROTRONIC AG Bassersdorf Switzerland Page 21 of 39

22 Login (Default username: Fact_user default password: Fact_pwd) Figure 27: Login Choose the language Figure 28: Language settings 2016 ROTRONIC AG Bassersdorf Switzerland Page 22 of 39

23 Network settings and system configuration: Figure 29: Main menu - networt settings Figure 30: Network settings 2016 ROTRONIC AG Bassersdorf Switzerland Page 23 of 39

24 Figure 31: Main menu - system configuration Figure 32: System configuration 2016 ROTRONIC AG Bassersdorf Switzerland Page 24 of 39

25 Configuration of the analog input 0-7 Figure 33: Main menu - analog inputs Figure 34: Setting and scaling of the analog inputs 2016 ROTRONIC AG Bassersdorf Switzerland Page 25 of 39

26 Add into the RMS Web Software After the finish of the network configuration, please plug the device via ethernet cable into the RMS network Click on Tools -> Setup Choose RMS Converter -> Click Add/Search at Devices Select RMS-8ADC-L-R-A Type the IP address of the device and click Search Device Figure 35: Select RMS-8ADC-L-R-A Please configure now the device (name, inputs etc. see the following figure). Figure 36: RMS device settings of a RMS-8ADC-L-R-A 2016 ROTRONIC AG Bassersdorf Switzerland Page 26 of 39

27 3.5.7 Add Lighthouse ApexR5 Particle counter The Lighthouse ApexR5 Particle counter is a device with an ethernet interface. Network configuration of the Rotronic AC3011 Masterbox For setting of the network configuration (DHCP, IP address, device name etc.), please follow the instructions of Lighthouse ( Add into the RMS Web Software Click on Tools -> Setup Choose RMS Converter -> Click Add/Search at Devices Select Lighthouse ApexR5 (See following figure) and click Search Device Figure 37: Device select of Lighthouse ApexR ROTRONIC AG Bassersdorf Switzerland Page 27 of 39

28 3.5.8 Use of AC3011 Masterbox The AC3011 Masterbox is a device that is used to add RS485 devices into an ethernet network. To use the AC3011 as such a RS485 <-> LAN converter, it is necessary do know the network settings of the AC3011 as (DHCP, IP address, Device name etc.). To get this information, please use the Digi Device Discovery Tool in the same manner as for HF4, 5, 6, 8 etc. see above Add AF1 AF1 is a device with a RS485 interface. To access the AF1, a RS485 Master as the Rotronic AC3011 Masterbox is necessary. Furthermore the DIP switchs 6-8 of the AF1 need to be set to define the bus address see as follows Figure 38: AF1 Modbus settings Network configuration of the Rotronic AC3011 Masterbox The ethernet configuration of the AC3011 Masterbox need to be set as well in the same manner as for HF4, 5, 6, 8 etc. using the Digi Device Discovery Tool see above. Add into the RMS Web Software Click on Tools -> Setup Choose RMS Converter -> Click Add/Search at Devices 2016 ROTRONIC AG Bassersdorf Switzerland Page 28 of 39

29 Select AF1, type IP address of the AC3011 master and activate the AC3011 master (See following figure) and click Search Device Figure 39: Device select of AF1 Please configure now the device (name, measurement settings etc. see the following figure). Figure 40: RMS device settings of a AF ROTRONIC AG Bassersdorf Switzerland Page 29 of 39

30 Add BF2 BF2 is a device with a RS485 interface. To access the BF2, a RS485 Master as the Rotronic AC3011 Masterbox is necessary. Network configuration of the Rotronic AC3011 Masterbox The ethernet configuration of the AC3011 Masterbox need to be set as well in the same manner as for HF4, 5, 6, 8 etc. using the Digi Device Discovery Tool see above. Add into the RMS Web Software Click on Tools -> Setup Choose RMS Converter -> Click Add/Search at Devices Select BF2 and type IP address of the AC3011 master and activate the AC3011 master (See following figure) and click Search Device Figure 41: Device select of BF ROTRONIC AG Bassersdorf Switzerland Page 30 of 39

Please configure now the device (name, measurement settings etc. see the following figure). Figure 42: RMS device settings of a BF2 3.5.

31 Please configure now the device (name, measurement settings etc. see the following figure). Figure 42: RMS device settings of a BF Add Airy P231 Particle counter Airy P231 Particle counter is a device with a RS485 interface. To access the Airy P231, a RS485 Master as the Rotronic AC3011 Masterbox is necessary. Network configuration of the Rotronic AC3011 Masterbox The ethernet configuration of the AC3011 Masterbox need to be set as well in the same manner as for HF4, 5, 6, 8 etc. using the Digi Device Discovery Tool see above. Add into the RMS Web Software Click on Tools -> Setup Choose RMS Converter -> Click Add/Search at Devices 2016 ROTRONIC AG Bassersdorf Switzerland Page 31 of 39

32 Select Airy P231 and type IP address of the AC3011 master and activate the AC3011 master (See following figure) and click Search Device Figure 43: Device select of an Airy P231 Please configure now the device (name, measurement settings etc. see the following figure). Figure 44: RMS device settings of a Airy P ROTRONIC AG Bassersdorf Switzerland Page 32 of 39

4 Firmware-Update RMS-Converter A firmware update of the RMS Converter can be done using the RMS Server Software or the RMS CONFIG. Firmware updates can be downloaded at www.rotronic.

33 4 Firmware-Update RMS-Converter A firmware update of the RMS Converter can be done using the RMS Server Software or the RMS CONFIG. Firmware updates can be downloaded at Firmware Update via RMS Software Main menu -> TOOLS -> SETUP -> select the RMS Converter for the FW update Options -> Firmware Update -> anwählen. Figure 45: Option -> FW update The RMS software compares the actual FW version of the device with the latest FW file version and decides if a FW update is executable. Figure 46: Feedback from the RMS system During FW update: Figure 477: FW update running After successful FW update: Figure 488: FW update successful 2016 ROTRONIC AG Bassersdorf Switzerland Page 33 of 39

34 4.2 Firmware Update per RMS-CONFIG Tool After adding the RMS Converter to the RMS-CONFIG, it appears: Figure 49: RMS Converter FW update via RMS CONFIG 2016 ROTRONIC AG Bassersdorf Switzerland Page 34 of 39

35 Please click Settings Figure 50: RMS Converter FW update via RMS CONFIG Remark: Please check if the RMS Converter is disabled within the RMS web software. Figure 51: RMS Converter disabled 2016 ROTRONIC AG Bassersdorf Switzerland Page 35 of 39

Figure 52: Choose the FW file After finish of the FW update

36 Click FW Update -> Dialog windows opens to choose the FW file. The Update starts automatically. Figure 52: Choose the FW file After finish of the FW update Figure 53: FW update sucessful finished 2016 ROTRONIC AG Bassersdorf Switzerland Page 36 of 39

37 5 Technical Specification General Device type Dimensionen RMS device to integrate Rotronic devices (earlier generation) and 3 rd party devices. 94 x 78 x 30 mm Nb. of measuring points Max. 100 Compatible products HF4, HF5, HF6, HF8, HLNT, PF4/5, CRP5, HL-RC (GP FlexGate2 433MHz, GP FlexGate2 US 915MHz) AF1 (RS485) via AC3011 Masterbox BF2 (RS485) via AC3011 Masterbox Airy P231 - Particle counter Lighthouse ApexR5 - Particle counter RMS-8ADC-L-R-A Power supply and plug Power supply voltage Electrical connection 5 VDC Via 230AC/5VDC power supply Digital interface Interface type Protocol Ethernet MODBUS TCP RoASCII Customer specific Konformitäten EMC directive Soldering material FDA / GAMP- directives EMC-directive: 2004/108/EC Lead free (RoHS-directive 2011/65/EU) FDA CFR21 Part 11 / GAMP5 Operating conditions Storage- and transport Operation C / %rf, not condensing C / %rf, not condensing 2016 ROTRONIC AG Bassersdorf Switzerland Page 37 of 39

38 6 Further documents Dokumentname E-IM-RMS-WEB E-SM-RMS-WEB E-OM-RMS-WEB Inhalt System installation manual System startup manual System operation manual 2016 ROTRONIC AG Bassersdorf Switzerland Page 38 of 39

39 7 Document Version Version Date Notes V1.0 February 2017 First version V1.2 January 2018 Sec. version 2016 ROTRONIC AG Bassersdorf Switzerland Page 39 of 39

RMS Mini Wireless Data Logger

RMS Mini Wireless Data Logger 2016 ROTRONIC AG Bassersdorf Switzerland Table of Contents 1 Overview... 3 1.1 RMS System Overview... 3 1.2 Device Overview... 4 1.3 RMS Mini Data Logger... 5 1.4 Power Supply...