SPECIFICATION APPROVAL SHEET

Size: px

Start display at page:

Download "SPECIFICATION APPROVAL SHEET"

Maximilian Washington
5 years ago
Views:

1 This product is RoHS compliant SPECIFICATION APPROVAL SHEET Fdt Tech Module No Description: SPEC No.: Version: Issue Date: LP104SFPxx-FxR 10.4 Digital TFT-LCD Module SAS September 27, 2012 This approval sheet contains 31 pages including the cover and appendix. Customer: APPROVED BY: Date: / / 12 APPROVED BY: CHECKED BY: DESIGNED BY: Copyright 2009 FLAT Display Technology Corporation. All rights reserved. add: No.85, Sec. 1, Fuxing Rd., South Dist., Taichung City 402, Taiwan (R.O.C.) fdt@fdt.com.tw Tel: , Fax:

2 2012/9/27 V Digital TFT-LCD Module 1. General Description 1.1 Features LP104SFPBx-FxR LP104SFPCx-FxR Prime View PD104SLF Digital TFT LCD Ultra Compact NTSC/PAL/SECAM Video Auto Switch Single Operation Voltage +12V CVBS / S-Video (Option) / Analog RGB (PC Mode) Signal Input All Functions can be controlled by UART Support Touch Screen Function (Option) 1.2 Applications Portable product Industrial Hand-held Security Instrument Display Office Electronics 1.3 Application Precautions Do not use the products herein for the following equipment which demands extremely high performance in terms of functionality, reliability, or accuracy. Aerospace equipment Communication equipment for trunk lines. Control equipment for the nuclear power industry. Medical equipment related to life support, etc. The other application that demands high reliability and functionality should first contact a sales representative. 1

3 2. Contents Contents Page 1. General Description Features Applications Application Precautions 1 2. Contents Black Diagram Black Diagram 4 4. TFT-LCD Information TFT-LCD Mechanical Specifications TFT-LCD Optical Characteristics 5 5. Order Information Unit Demo Board (Option) 7 6. Dimension Information Unit (LP104SFPB1-FDR) Unit (LP104SFPB1-FNR) Unit (LP104SFPC1-FNR) Unit (LP104SFPBV-FNR) Unit (LP104SFPBU-FNR) Unit (LP104SFPCV-FNR) Unit (LP104SFPCU-FNR) Pin Description J302 PVI LCD Panel I/O Terminals (20 Pin LVDS Connector Pitch 1.25mm Side Entry Type) J101B Pin Assignment of Analog RGB Input ( D-Sub 15Pin) J101: Pin Assignment of UART (Pitch 1.25mm 4Pin, Top Entry Type) DC JACK: Pin Assignment of Power Input (Inside Diameter:2.1 Outside Diameter:5.5 Side Entry Type) RCA JACK: Pin Assignment of Video Input (RCA JACK Yellow, Side Entry Type) J401B Pin Assignment of Touch USB (USB-Female 2.0mm, Side Entry Type )(Option) J401C Pin Assignment of Touch RS232 (D-SUB 9 FEMALE)(Option) Absolute Maximum Ratings Absolute Maximum Ratings Recommended Operating Conditions Electrical Characteristics VGA Mode Characteristics Panel Backlight Data Sample Test Data W Resistance Touch Panel Characteristics Pin Assignment ( Pitch : 1.0mm) 20 2

4 10.2 Electrical Performance Optical Performance Mechanical Performance Durability Performance Environmental Reliability Test Procedure Operation Manual Driver Board Manual (LP104SFPB1-FDR) Driver Board Manual (LP104SFPxx-FxR) Simple Demo Board Manual (Option) Packing List Key Function by OSD Menu Operation Operations Application Schematic Diagram Application Circuit Accessory MDSM FDR (Option) 30 3

5 3. Block Diagram 3.1 Block Diagram 4

6 4. TFT-LCD Information 4.1 TFT-LCD Mechanical Specifications Parameter Specifications Unit Screen Size 10.4 (diagonal) inch Display Format 800 x (R.G.B) x 600 dot Active Area 211.2(H) x 158.4(V) mm Pixel Pitch (H) x (V) mm Pixel Configuration Stripe Outline Dimension W x H x 5.6 (typ.) D mm Surface Treatment Anti-glare and EWV Weight g 4.2 TFT-LCD Optical Characteristics Parameter Symbol Condition Min Typ Max Unit Remark Left deg Horizontal Right deg Viewing Angle CR >10 Top deg Vertical Bottom deg Contrast Ratio CR Tr ms Response time Rise Fall = 0 Tf ms Uniformity U % Brightness = 0 = Cd/m 2 X White Chromaticity y LED Life Time hrs 5

7 5. Order Information 5.1 Unit Unit Order Part Number CVBS S-VIDEO VGA Video Loop-out D-Sub15 2.0mm 14Pin USB Touch Screen Driver RS232 Touch Screen Driver 5W Resistance Touch Panel Demo Board MDSM FDR LP104SFPB1-FDR - LP104SFPB1-FBR - - LP104SFPC1-FBR LP104SFPBV-FBR - LP104SFPBU-FBR - LP104SFPCV-FBR - - LP104SFPCU-FBR - - LP104SFPB1-FNR - - LP104SFPC1-FNR LP104SFPBV-FNR - LP104SFPBU-FNR - LP104SFPCV-FNR - - LP104SFPCU-FNR - - 6

8 Order Part Number AC to DC Adapter 12V/3A LASTD12030-FDR Power Cord Plug Type B for USA LAACD18000-FDR Video Cable LAVDO18000-FDR VGA Cable LAVGA16000-FDR USB Cable LAUSB18000-FDR RS232 Cable LARS FDR LP104SFPB1-FDR LP104SFPB1-FBR - - LP104SFPC1-FBR LP104SFPBV-FBR - LP104SFPBU-FBR - LP104SFPCV-FBR - - LP104SFPCU-FBR - - LP104SFPB1-FNR LP104SFPC1-FNR LP104SFPBV-FNR LP104SFPBU-FNR LP104SFPCV-FNR LP104SFPCU-FNR Demo Board (Option) Demo Board Order Part Number Part Number Remark MDSM FDR Cable: A09WC R LP104SFPB1-FDR 7

9 6. Dimension Information 6.1 Unit (LP104SFPB1-FDR) 8

10 6.2 Unit (LP104SFPB1-FNR) 9

12 6.4 Unit (LP104SFPBV-FNR) 11

13 6.5 Unit (LP104SFPBU-FNR) 12

14 6.6 Unit (LP104SFPCV-FNR) 13

15 6.7 Unit (LP104SFPCU-FNR) 14

16 7. Pin Description 7.1 J302 PVI LCD Panel I/O Terminals (20 Pin LVDS Connector Pitch 1.25mm Side Entry Type) Pin No Symbol I/O Description Remark 1 VDD I +3.3V Power Supply 2 VDD I +3.3V Power Supply 3 GND - Ground 4 GND - Ground 5 INO- I LVDS receiver signal channel 0 6 INO+ I LVDS receiver signal channel 0 7 GND - Ground 8 IN1- I LVDS receiver signal channel 1 9 IN1+ I LVDS receiver signal channel 1 10 GND - Ground 11 IN2- I LVDS receiver signal channel 2 12 IN2+ I LVDS receiver signal channel 2 13 GND - Ground 14 CLK- I LVDS receiver signal clock 15 CLK+ I LVDS receiver signal clock 16 GND - Ground 17 NC - No connection 18 NC - No connection 19 GND - Ground 20 GND - Ground 15

7.2 J101B Pin Assignment of Analog RGB Input ( D-Sub 15Pin) Pin No Symbol I/O Description Remark 1 RI+ I Analog Red Signal 2 GI+ I Analog Green Signal 3 BI+ I Analog Blue Signal 4 NC - No Connection

17 7.2 J101B Pin Assignment of Analog RGB Input ( D-Sub 15Pin) Pin No Symbol I/O Description Remark 1 RI+ I Analog Red Signal 2 GI+ I Analog Green Signal 3 BI+ I Analog Blue Signal 4 NC - No Connection 5 GND - Ground 6 AGND - Analog Ground 7 AGND - Analog Ground 8 AGND - Analog Ground 9 VGA5V - VGA +5V Input 10 VGA-Det I VGA Detect 11 NC - No Connection 12 NC - No Connection 13 HS_IN I TTL Horizontal sync 14 VS_IN I TTL Vertical sync 15 NC - No Connection 7.3 J101: Pin Assignment of UART (Pitch 1.25mm 4Pin, Top Entry Type) Pin No Symbol I/O Description Remark 1 TX O UART Transmission Data 2 RX I UART Receive Data 3 GND - Ground VA O +3.3V Output Voltage Note: All Functions can be controlled by UART, About UART command list please contact FDT sales. 16

18 7.4 DC JACK: Pin Assignment of Power Input (Inside Diameter:2.1 Outside Diameter:5.5 Side Entry Type) Pin No Symbol I/O Description Remark 1 VIN I +12V Input Voltage 2 GND - Power Ground 7.5 RCA JACK: Pin Assignment of Video Input (RCA JACK Yellow, Side Entry Type) Pin No Symbol I/O Description Remark 1 Video I Video Input 2 AGND - Analog Ground 7.6 J401B Pin Assignment of Touch USB (USBA-Female 2.0mm, Side Entry Type )(Option) Pin No Symbol I/O Description Remark 1 DGND - Digital Ground 2 D+ - DATA (+) 3 D- - DATA (-) 4 VBUS - USB VCC 7.7 J401C Pin Assignment of Touch RS232 (D-SUB 9 FEMALE)(Option) Pin No Symbol I/O Description Remark 1 NC - No Connection 2 TXD - Transmit Data 3 RXD - Receive Data 4 NC - No Connection 5 GND - Ground 6 NC - No Connection 7 NC - No Connection 8 NC - No Connection 9 NC - No Connection 17

19 8. Absolute Maximum Ratings 8.1 Absolute Maximum Ratings Parameter Symbol Min Max Unit Remark Input Voltage Vin V Video Input Signal Video in S-Video Input Signal S-Video in Analog RGB Input Signal Analog RGB in Digital Input Signal TTL V Operating Temperature Storage Temperature

20 9. Recommended Operating Conditions 9.1 Electrical Characteristics Parameter Symbol I/O Min Typ Max Unit Note Input Voltage Vin I V Total Current Iin I Power Consumption I Output Voltage VDD O V I=10mA Video Input Signal Video in I 1.0 S-Video Input Signal S-Video in Y I 0.7 C I Analog RGB Input Signal Analog RGB in RGB I VGA Mode Characteristics Dots per inch H Unit Polarity V Unit Polarity Note 640* KHz Negative Hz Negative 800* KHz Positive Hz Positive 1024* KHz Negative Hz Negative 9.3 Panel Backlight Data Parameter Symbol Min Typ Max Unit Note Supply voltage of LED backlight VL 11 V Supply current of LED backlight IL 20 ma IL=20mA * 13 =260mA, ( 10 ) 9.4 Sample Test Data Parameter White Window Red Green Blue Remark S/N 001 x y L(cd/m²) TC( K) ±15 NOTE 1. Luminance Meter BM-7 FAST(TOPCON) 2.Pattrn Generator: FLUKE PM Measurement Distance 500mm 50mm 4. TOPCON BM-7 Luminance Meter 2 filed of view is used in the testing (After 10min ~20min operation) 19

21 10. 5W Resistance Touch Panel Characteristics 10.1 Pin assignment ( Pitch :2.54 mm) Pin No Symbol Description Remark 1 RT Right & Top electrode 2 RL Right & Lower electrode 3 SG Signal Ground 4 LT Left & Top electrode 5 LL Left & Lower electrode 10.2 Electrical Performance Parameter Symbol Min Typ Max Unit Remark Loop Resistance X Y Linearity % Insulation Impedance M DC 25V Response Time ms 10.3 Optical Performance Parameter Transparency Haze Specifications 80% 9.5% 2% 10.4 Mechanical Performance Parameter Input Method Operating Force Surface Hardness Specifications Finger or stylus pen 50gf 3H 20

22 10.5 Durability Performance Parameter Knock Test Specifications 10,000,000 times 10.6 Environmental Parameter Operating Temp. Storage Temp. Specifications -10 ~70 (Except dew condensation) -40 ~80 (Except dew condensation) Operating Humidity (Non Condensing) 20% RH~ 90%RH Storage Humidity (Non Condensing) 10% RH~ 90%RH 10.7 Reliability test procedure Parameter High temperature storage test Low temperature storage test Thermal Cycling Specifications 70 for 500 hours. -40 for 500 hours. -40 (1 hr each)~80 (1 hr each) for 100 cycles. High temperature and high humidity 70, 80%RH for 500 hours. 21

23 11. Operation manual / Connection 11.1 Driver Board Manual (LP104SFPB1-FDR) 11.2 Driver Board Manual (LP104SFPxx-FxR 22

24 11.3 Simple Demo Board Manual (Option) 23

12. Packing List Before you begin installing the KIT, please make sure that the following materials have been shipped: A. AC to DC Adapter (100-240VAC 50-60Hz to +12VDC @ 3A) B.

25 12. Packing List Before you begin installing the KIT, please make sure that the following materials have been shipped: A. AC to DC Adapter ( VAC 50-60Hz to 3A) B. Power Cord (L:1800mm, LP104SFPxx-FBR Only, Plug Type B for USA) C. Video Cable (L:1800mm, LP104SFPBx-FBR Only) D. VGA Cable (L:1600mm) E. USB Cable (L:1800mm, LP104SFPxV-FBR Only) F. RS-232 Cable (L:1800mm, LP104SFPxU-FBR Only) G. Touch Screen Driver CD Disk / User Manual If any of these items are missing or damaged, contact your distributor or sales representative immediately. 24

26 13. Key Function by OSD 13.1 Menu Operation Current selected indicator Meaning of the selected indicator Other indicators Current value Fig.13-1 Expand current selected indicator Adjustable range POWER SOURCE MENU UP DOWN Operations of key board 1. To navigate the menu, press [MENU]. (Fig.13-1) 2. The indicator lighting up in white color is the selected adjustment item. 3. To Next Item of the menu, press [MENU] again. 4. The operations below are only available when Menu is started. 5. Press [UP] / [DOWN] to adjust the value of the selected item. 25

27 Overview of the menu Firmware must be VER 0.26 Indicator Meaning Adjustable range For Remark Brightness 0 64 AV / VGA Adjust-Bar Contrast 0 64 AV / VGA Adjust-Bar Color 0 64 AV Adjust-Bar Tint 0 32 AV Adjust-Bar Sharpness 0 16 AV Adjust-Bar Dimmer 0 9 AV / VGA Color Tone Normal / Warm / Cool AV / VGA H-Position AV / VGA Balance-Bar V-Position AV / VGA Balance-Bar Auto VGA Scan Over Scan / Under Scan AV Information AV / VGA Fig.13-2 Setup AV / VGA Fig.13-3 Factory Set AV / VGA Exit AV / VGA Fig

28 Setup Menu Fig.13-3 Indicator Meaning Adjustable range Function Remark Show Status ON / OFF Show signal status. ON: Show OFF: Hidden Blue Screen ON / OFF If loss signal will put on the ON: Blue blue or black screen. OFF: Black Auto Power On ON / OFF Power input module will be ON: Auto auto turn on. OFF: Manual Auto Saving OFF / 3s / 5s / 15s / If signal lost over setting ON: Auto 30s times will be power off. OFF: Normal Detect Source ON / OFF Auto detection which source ON: Auto is existence and change. OFF: Normal Return Note : VGA only type don t have Detect Source function. 27

29 13.2 Operations Indicator of input signal Video system Fig.13-4 [Power] Monitor power on / off [Source] Input signal switch Overview of input signals Indicator Input signal Interface Video system AV1 Composite NTSC / PAL / SECAM VGA Analog RGB 640x480_60 / 800x600_60 /1024x768_60 28

30 14. Application Schematic Diagram 14.1 Application Circuit 29

31 15. Accessory 15.1 MDSM FDR 30

SPECIFICATION APPROVAL SHEET

This product is RoHS compliant SPECIFICATION APPROVAL SHEET Fdt Tech Module No Description: SPEC No.: Version: Issue Date: LP104CWWBx-FxR 10.4 Digital TFT-LCD Module SAS-1212002 0.1 October 18, 2013 This