Control IT S800 I/O System

Transcription

1 Control IT S00 I/ System for cost-effective process control, down to the last field device

2 STN ADD D D D D rom project engineering to plant maintenance S00 I/ makes work easier S00 I/ components; a fieldbus communication interface, two fully featured S00 I/ modules and a vacant termination base. The light version, S00L I/, is a cost-effective solution for less demanding applications S00 I/ is a comprehensive, distributed, process I/ system that communicates with parent controllers over industrystandard field buses. Thanks to its broad connectivity it fits a wide range of process controllers from ABB and others. And it bears the name of ABB, the world leader in industrial IT. By permitting installation in the field, close to sensors and actuators, S00 I/ reduces the installation cost by reducing the cost of cabling. And thanks to benefits such as: S00 I/ is almost completely configuration-free; all you have to do is to set the fieldbus station address on the switches provided. STN ADD flexibility, permitting a virtually infinite number of installation arrangements, small or large, indoors or outdoors, wall mounting or floor standing, modularity, permitting step-by-step expansion without bottlenecks ever developing, cost-effectiveness, making you save on hardware, cabling, installation and maintenance, reliability thanks to features such as autodiagnostics and redundancy with bumpless, automatic, change-over, it helps you get a tighter grip on production and thereby improve profitability. Light, upright and lateral I/ modules can be mixed and matched arbitrarily. Plug-in extension cables allow multiple mounting rails and flexible cabinet layouts. Lengths: m

3 Light or fully featured S00 I/ comes in two versions, light or fully featured. The light version - designated S00L I/ - is optimized for applications where the basic functionality of interfacing with field devices for both measuring and control is the essence. The fully featured version, designated S00 I/, is intended for more demanding applications where hot swap of I/ modules is of interest for availability s sake. Both versions can co-exist on the same rail. Advant ieldbus 0 or Profibus DP Both versions of the I/ system support both Advant ieldbus 0 and Profibus DP. So they are compatible with a wide range of process controllers from ABB and other suppliers. Hardware keys ensure that only the right type of module can be plugged onto each base rom left to right, redundant pairs of fieldbus interfaces, process inputs and process outputs Compact or expanded installation Both versions of the I/ system are intended for mounting on standard DIN rails. Multipole connectors on the sides extend the internal communication bus incrementally as new modules are snapped on and pushed sideways to make contact with its existing neighbor. S00L I/ modules are indivisible and equipped with detachable screw terminal blocks along the bottom where the process cabling is terminated. ully featured S00 I/ modules on the other hand consist of two parts, a passive termination base and an active I/ module that plugs onto this base. The base is equipped with connection terminals for all in- and outgoing cables. There are two types of termination bases, one Compact, for upright module installation, and one Expanded, for lateral installation. The former results in space savings with maximum I/ channels per rail, the latter in more room for cable termination. Expanded termination bases provide fuses and terminals for field power distribution, eliminating the need for external cable marshaling in the majority of cases. Compact and extended termination bases can coexist in the same I/ station, meaning that they can be mixed and matched to meet the needs for termination of each field device. I.e. maximum installation flexibility. The space and environmental protection requirements are modest, making S00 I/ ideal for distributed out-front installation for maximum cost savings. Subordinated I/ clusters can be connected as far as 00 m away by fiber-optic extension cable (ModuleBus). Ideal for electrically noisy environments and sprawling equipment sets.

4 Single or redundant solutions S00 I/ offers redundancy options for power supply and all host-connection modes: direct, fiber-optic, and fieldbus. And follows through with redundancy options for all downstream links: internal bus and I/ channels. Meaning that all weak links can be eliminated. Safe or hazardous areas The fully featured version includes intrinsic safety I/ modules, facilitating installation of I/ stations in potentially hazardous Class I, Div. areas and connection to field devices in hazardous Class I, Div. areas (Zones - 0). Consequently, you can use S00 I/ throughout your plant, standardization that all involved will benefit from. Class, Div. (Zone pending) Intrinsic safety modules are marked blue in accordance with applicable standards. ABB s AC00 M is one of many industrial controllers that can use S00 I/ for process communication. Here equipped with two communication modules (left) and one S00 I/ module (right). Class, Div. (Zone 0 - Zone ) Analog or digital I/ Economical S00 I/ when the tasks are simple......or demanding. Digital process interfacing modules typically provide channels while analog modules offer. Since an S00 I/ station can accommodate I/ modules, this means up to digitals or analogs per station or any mix between the two extremes. ith optional ModuleBus expansion, up to I/ modules can be accommodated, thus doubling the above-mentioned I/ capacity. The I/ modules of a station can all be mounted on a single rail or be distributed across several, in the latter case using plug-in interconnecting cables. These alternatives make S00 I/ fit a wide range of standard wall-mounting and floorstanding enclosures. A fiber-optic ModuleBus even makes it possible to break up S00 I/ stations into clusters installed hundreds of meters apart, i.e., a cost-effective and noise-immune way of implementing distributed control. A minimal S00 I/ station with two L- type modules. There are inputs and outputs for industry-standard d.c. and a.c. signal levels and devices, including resistancetemperature sensors and thermocouples. There are even pulse and frequency counters as well as intrinsic safety- and HAT -supporting modules. So just about all the process devices we can think of can be wired up to S00 I/ stations with a minimum of field cabling and intermediate signal conditioning. A more fully equipped S00 I/ station with redundant fieldbus interfaces, redundant I/ modules (two of which are connected by bus extension cables) and a subordinated I/ cluster connected via an optical module bus loop. A single S00 I/ station can be expanded to hold hundreds of I/ channels. urther stations can be installed as needed.

5 Ample means for keeping production up S00 I/ works with a wide range of process controllers from ABB and others. Plenty of features are built into S00 I/ to make it reliable, fault tolerant and autodiagnosing, e.g.: Diagnostic LEDs on all modules, High data communication security for zero errors, ptional dual redundancy in everything from power supply, through fieldbus communication, to I/ channels, Each input and output can be set individually to take on a predefined value or freeze in case of serious trouble, ully featured S00 I/ modules can be withdrawn and reinserted live without disturbing the rest of the station. Hardware and software keys ensure that only modules of the right type can be inserted. Hot Configuration In un. Each I/ station can be reconfigured from the host system while in full, uninterrupted, service. These and other features, improve reliability, boost availability and shorten downtimes. Transparent configuration S00 I/ stations are configured as part of the parent controller like local I/, which means that no additional knowledge or skills are required. Configurations defined in this way are downloaded automatically on start-up. Similarly, the I/ system supports the DT/ DTM standard and offers HAT pass-through, that is, a consistent, easy-to-use interface toward fieldbus-connected devices. Thanks to it all, such devices can be managed in the same easy way, regardless of type or make. eliability and ruggedness confirmed S00 I/ has passed tough type tests by leading maritime inspection and classification societies, confirming that the equipment is able to operate reliably and durably even under the most extreme conditions. eliability and durability you will benefit from. Environment-friendly The S00 I/ family is designed and manufactured according to the environmental protection standard IS 00. So you can go for it with a clear conscience.

6 As part of its Industrial IT activities ABB has developed a long-term strategy of offering a comprehensive range of products and systems for industrial applications. At the heart of this strategy is the Aspect bjects concept which allows users access to all control and information systems within the enterprise and to assemble the information they require in a format best suited to their needs. Users are able to extend, modify and migrate their systems without difficulty. ABB has developed a suite of human-system interfaces which combines comprehensive process know-how and experience with advanced software functionality. Based on the indows platform, these user interfaces provide a consistent method for accessing enterprise-wide systems and for launching multiple applications from any connected workstation in a plant or office. Automation Technology Products within ABB offers a complete range of Industrial IT products, from individual programmable controllers to complete control systems for complex plants. These products are sold and supported by the worldwide network of ABB. If you would like to know more about the products please contact your local office or visit our website at Produced by &B TeknikTransfer HB, Västerås, Sweden. Printed by PrimaTryck, Hallstahammar, Sweden.