MAX15090/MAX15090A Evaluation Kits. Evaluate: MAX15090/MAX15090A. Features. General Description. Component List
|
|
- Claud Reed
- 5 years ago
- Views:
Transcription
1 General Description The MAX5090 evaluation kit (EV kit) provides a proven design to evaluate the MAX5090 hot-swap controller with an integrated 2A MOSFET. The MAX5090 EV kit is configured to pass 2A in a 2.7V to 8V hot-swap application, thus providing a fully integrated solution. The MAX5090 EV kit uses the MAX5090EWI+ in a 3.5mm x 2mm, 28-bump, 0.5mm pitch wafer-level package (WLP) with a proven four-layer PCB design. As configured, the MAX5090 EV kit is optimized to operate at 2V. The MAX5090A EV kit can be used to evaluate the MAX5090A and uses the MAX5090AEWI+. Ordering Information appears at end of data sheet. Component List DESIGNATION QTY DESCRIPTION C, C2 2 C3 C4 C5 C6 C 6 C2 0 C3 0 C4 0 µf ±0%, 25V X7R ceramic capacitors (0603) Murata GRM88R7E05K TDK C608X5RE05M 5600pF ±0%, 50V X7R ceramic capacitor (0603) Murata GRM88R7H562K TDK C608C0GH562J 0.047µF ±0%, 25V X7R ceramic capacitor (0603) Murata GRM88R7E473K TDK C608X7RE473K 0.22µF ±0%, 25V X7R ceramic capacitor (0603) Murata GRM88R7E224K TDK C608X7RE224K 0µF ±0%, 25V X7R ceramic capacitors (206) Murata GRM3CR7E06K TDK C326X5RE06M Not installed, ceramic capacitor (206) Not installed, electrolytic capacitor (D = mm) Not installed, ceramic capacitor (0805) Features 2.7V to 8V Operating Voltage Range Up to 2A Configurable Load Current Capability Banana Jacks for Input and Output Voltage Programmable Slew-Rate Control Selectable/Configurable Circuit-Breaker Threshold Configurable Overvoltage/Undervoltage Lockout Programmable Time-Out Delay FAULT and PG Outputs Defined Safe Operation Area Proven PCB Layout Fully Assembled and Tested DESIGNATION QTY DESCRIPTION CDLY, GATE, GDRV, REG, UV, VCC 6 Red test points D 8V, 600W transient voltage suppressor (SMB) Fairchild SMBJ8A D2 0 Not installed, Schottky diode (SMA) D3 0 Not installed, Schottky diode (SOD523) (x2),, 4 Banana jacks JU 3-pin header JU2 2-pin header Q 30V, 94A n-channel MOSFET (DPAK) IRF IRLR83TRPBF R 78kΩ ±% resistor (0603) R2 5.23kΩ ±% resistor (0603) R3 7.8kΩ ±% resistor (0603) R4 0Ω ±5% resistor (0603) R5 40.2kΩ ±5% resistor (0603) R6 kω ±% resistor (0603) R7 R9 3 00kΩ ±5% resistors (0603) R0 49.9Ω ±% resistor (0603) R 50kΩ potentiometer R2 0Ω resistor (0603) ; Rev 0; /2
2 Component List (continued) DESIGNATION QTY DESCRIPTION U 2A hot-swap solution (28 WLP) Maxim MAX5090EWI+ or Maxim MAX5090AEWI+ DESIGNATION QTY DESCRIPTION 2 Shunts PCB: MAX5090 EVALUATION KIT U2 General-purpose timer (8 SO) Maxim ICM7555ISA Component Suppliers SUPPLIER PHONE WEBSITE Fairchild Semiconductor Murata Electronics North America, Inc STMicroelectronics TDK Corp Note: Indicate that you are using the MAX5090 when contacting these component suppliers. Quick Start Required Equipment MAX5090 EV kit 2V, 2A DC power supply Voltmeter Procedure The EV kit is fully assembled and tested. Follow the steps below to verify board operation. Caution: Do not turn on the power supply until all connections are completed. ) Verify that a shunt is installed across pins -2 on jumper JU. 2) Turn on the power supply and set the supply to 2V, then disable the power supply. 3) Connect the positive terminal of the power supply to the banana jack on the EV kit. Connect the negative terminal of the power supply to the banana jack. 4) Enable the power supply. 5) Verify that the voltage between the and banana jacks is 2V. 6) Verify that the internal regulator voltage (REG) is 3.3V. 7) The EV kit is now ready for additional evaluation. Detailed Description of Hardware The MAX5090 EV kit provides a proven design to evaluate the MAX5090. The MAX5090 EV kit can be conveniently connected between the system power and the load using the banana jacks provided for the input and output. PCB pads are provided to monitor and control the device signals. The MAX5090 EV kit operates between 2.7V and 8V up to 2A load current capability. Evaluating the MAX5090A The MAX5090A EV kit can be used to evaluate the MAX5090A, with the MAX5090AEWI+ installed. The MAX5090A is pin-to-pin compatible with the MAX5090. Refer to the MAX5090/MAX5090A IC data sheet for details on the MAX5090A. Circuit Breaker (CB) Jumper JU sets the current limit for the internal circuit breaker (CB) of the device. The CB pin can be connected to a fixed resistor (R5) or a potentiometer (R) to set the current limit. See Table for shunt positions. The circuit-breaker threshold can be set according to the following formula: I CB = R CB / where I CB is in A and R CB (the resistor between CB and ground) is in Ω. Table. JU Jumper Selection (CB) SHUNT POSITION CB P CONNECTED TO CURRENT LIMIT -2* R5 2A 2-3 R Adjustable *Default position. Maxim Integrated 2
3 Table 2. JU2 Jumper Selection (EN) SHUNT POSITION EN P TIME- DELAY Installed Forced to Bypassed Not installed* Set low when C5 is charged to 2/3 x ; timing is set by R7/C5 47ms (set by C4) *Default position. Setting Time-Out Delay for EN (CDLY) Capacitor C4 is used to set the time-out delay for EN to go low to prevent internal MOSFET shutdown after powerup. This is set at a rate of s/µf. The EV kit is configured for a 47ms time-out delay. Delayed EN The IC s EN pin must be pulled low before the time-out delay set by capacitor C4 elapses. The EV kit provides a simple timer circuit comprised of U2, R7, and C5 to pull the EN pin low before the time-out delay. Once PG asserts as open-drain, R7 begins to charge C5 to the output voltage (). When C5 charges to 2/3 x, U2 pulls the EN pin low. The EV kit is configured to have EN pulled low after ~22ms. Jumper JU2 is also provided to bypass the time-out delay and force EN low, if installed. See Table 2 for JU2 settings. Setting the Output Slew Rate An external capacitor (C3) is connected from GATE to on the IC to reduce the output slew rate during startup. During startup, a 5.7µA (typ) current is sourced to enhance the internal MOSFET with 0V/ms (typ). C3 can be calculated according to the following formula: Undervoltage Lockout The EV kit provides an option to configure the undervoltage-lockout threshold. The undervoltage-lockout threshold for the device is configured by the voltage level divided by R and (R2 + R3) at the UV pin. By default, the undervoltage-lockout threshold is set to 0.8V. Overvoltage Lockout The EV kit provides an option to configure the overvoltage-lockout threshold. The overvoltage-lockout threshold for the device is configured by the voltage level divided by (R + R2) and R3 at the OV pin. By default, the overvoltage-lockout threshold is set to 3.2V. Current-Sense Output (ISENSE) The IC s ISENSE pin is the output of an accurate currentsense amplifier and provides a source current proportional to the load current flowing into the main switch. The factory-trimmed current ratio is set to 220µA/A. On the EV kit, this allows producing a scaled voltage by routing resistor R6 from ISENSE to. This voltage signal then goes to an ADC and provides digitized information of the current supplied to the powered system. C3 = (I GATE x t)/ V GATE where I GATE is 5.7µA (typ), t is the desired slew rate, and V GATE is the voltage at the gate of the internal MOSFET at turn-on. Maxim Integrated 3
4 GATE PG FAULT ISENSE CDL Y A4 B4 C4 D4 B6 C6 D6 A6 D7 C7 A A7 B2 C C2 2V R5 40.2k R4 0 R 78k C uf R2 5.23k C2 uf R3 7.8k R9 00k D A3 B3 C3 A5 B5 C5 D5 A2 D2 B D D3 B7 VCC UV CB REG OV EN 2 JU2 U M AX5090 C3 5600pF C uF R6 k % R7 00k PG R8 00k FA ULT ISENSE U2 VDD TRIGGER DI SCHARGE P UT THRESHOL D RSET CONTROL VOLTAGE IC M7555 Q ENB PG JU R 50k % % % REG % REG REG GATE CDLY C6 0uF PG C7 0uF C8 0uF C9 0uF C0 0uF C 0uF ENB C5 0.22uF R % 2 3 C2 open D3 OPEN VCC UV C4 OPEN D2 R2 0 C3 OPEN GDRV 3 2 Figure. MAX5090 EV Kit Schematic Maxim Integrated 4
5 Figure 2. MAX5090 EV Kit Component Placement Guide Component Side Figure 3. MAX5090 EV Kit PCB Layout Component Side Figure 4. MAX5090 EV Kit PCB Layout Layer 2 (PWR/) Maxim Integrated 5
6 Figure 5. MAX5090 EV Kit PCB Layout Layer 3 () Figure 6. MAX5090 EV Kit PCB Layout Solder Side Maxim Integrated 6
7 Ordering Information PART MAX5090EVKIT# MAX5090AEVKIT# #Denotes RoHS compliant. TYPE EV Kit EV Kit Maxim Integrated 7
8 Revision History REVISION NUMBER REVISION DATE DESCRIPTION PAGES CHANGED 0 /2 Initial release For pricing, delivery, and ordering information, please contact Maxim Direct at , or visit Maxim Integrated s website at. Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc. 202 Maxim Integrated Products, Inc. 8
MAX15096/A/D Evaluation Kits. Evaluate: MAX15096/MAX15096A/MAX15096D. General Description. Features. Component List
General Description The MAX15096/A/D evaluation kit (EV kit) provides a proven design to evaluate the MAX15096 hot-swap controller with an integrated 6A MOSFET. The EV kit is configured to pass 6A in a
More informationGeneral Description. Features. Component List. Component Suppliers
General Description The MAX5911 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that demonstrates the MAX5911 fully integrated hot-swap solution for negative supply
More informationMAX16128/MAX16129 Evaluation Kits. Evaluate: MAX16128/MAX General Description. Features. Component List
General Description The MAX16128/MAX16129 evaluation kits (EV kits) demonstrate high overvoltage protection of the MAX16128/ MAX16129 for automotive applications that must survive load-dump and high-voltage
More informationEvaluates: MAX14571 MAX MAX14571 Evaluation Kit. General Description. Features. MAX14571 EV Kit Photo
General Description The MAX14571 evaluation kit (EV kit) demonstrates the MAX14571 adjustable overvoltage and overcurrent protector in a 14-pin TSSOP surface-mount package with an exposed pad. The EV kit
More information+Denotes lead-free and RoHS compliant.
19-2446; Rev 1; 6/08 MAX17062 Evaluation Kit General Description The MAX17062 evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that provides the voltages required for active-matrix,
More informationS Low-Power Shutdown Input S Fully Assembled and Tested. Maxim Integrated Products 1
19-5599; Rev 0; 10/10 MAX98303 Evaluation Kit General Description The MAX98303 evaluation kit (EV kit) is a fully assembled and tested PCB that evaluates the MAX98303 stereo 3.1W Class D amplifier in a
More informationS IEEE 802.3af/at-Compliant PSE Circuit. Maxim Integrated Products 1
19-5740; Rev 0; 1/11 MAX5971A Evaluation Kit General Description The MAX5971A evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board featuring an Ethernet single-port power-sourcing
More informationMAX17116Q Evaluation Kit Evaluates: MAX17116 in a 24-Pin TQFN Package
19-5846; Rev 0; 5/11 MAX17116Q Evaluation Kit General Description The MAX17116Q evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that evaluates the MAX17116 dual-output DC/DC power
More informationEvaluates: MAX MAX14970 Evaluation Kit. General Description. Quick Start (Application Circuit) Features. Table 1. Default Shunt Positions
General Description The MAX14970 evaluation kit (EV kit) provides a proven design to evaluate the MAX14970 dual-channel buffer. The EV kit contains four sections: an application circuit, characterization
More informationFeatures. General Description. Component List
MAX5988A Evaluation Kit Evaluates: MAX5988A General Description The MAX5988A evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board featuring an Ethernet port, network powered-device
More informationS On-Board Clock Generator Capable of 33MHz and 16.5MHz. S Accessible Headers to All 8 Input/Output (I/O) Channels
19-5067; Rev 0; 11/09 MAX13055E Evaluation Kit General Description The MAX13055E evaluation kit (EV kit) provides a proven design to evaluate the MAX13055E 8-channel, bidirectional level translator. The
More informationS Complete 2:1 VGA Multiplexer S VGA Connections and Power S LED Indicators for Switch Connections S VGA Inputs/Outputs S Fully Assembled and Tested
19-5030; Rev 0; 10/09 MAX4885AE Evaluation Kit General Description The MAX4885AE evaluation kit (EV kit) is a fully assembled and tested circuit board that evaluates the MAX4885AE VGA 2:1 multiplexer.
More informationMAX14579E Evaluation Kit Evaluates: MAX14579E/MAX14579AE
19-5995; Rev 0; 8/11 General Description The MAX14579E evaluation kit (EV kit) provides a proven design to evaluate the MAX14579E headset detection IC. The EV kit is designed to demonstrate the IC s headset
More informationMAX5097A Evaluation Kit. Evaluates: MAX5097A
19-0718; Rev 0; 1/07 MAX5097A Evaluation Kit General Description The MAX5097A evaluation kit (EV kit) demonstrates the MAX5097A in a standard application circuit demonstrating high efficiency. The EV kit
More informationMaxim Integrated Products 1
19-4581; Rev 0; 4/09 MAX4989 Evaluation Kit General Description The MAX4989 evaluation kit (EV kit) provides a proven design to evaluate the MAX4989 Hi-Speed 2-of-4 USB 2.0 crosspoint switch. The EV kit
More informationS Application Circuit with SATA Input/Output S Eye Diagram Test Circuit with SMA Inputs/ Outputs
19-4953; Rev 0; 9/09 MAX4951AE Evaluation Kit General Description The MAX4951AE evaluation kit (EV kit) provides a proven design to evaluate the MAX4951AE dual-channel buffer. The EV kit contains four
More information+Denotes lead(pb)-free and RoHS compliant. C76, C77, C83 C86
19-5061; Rev 0; 11/09 MAX11046 Evaluation Kit General Description The MAX11046 evaluation kit (EV kit) provides a proven design to evaluate the MAX11046 8-channel, 16-bit, simultaneous-sampling ADC. The
More information+Denotes lead(pb)-free and RoHS compliant. FOUTL-, FOUTL+, FOU TR-, FO U TR+, V D D, P G N D
19-4071; Rev 1; 9/09 MAX9736A Evaluation Kit General Description The MAX9736A evaluation kit (EV kit) is a fully assembled and tested printed-circuit board (PCB) that configures the MAX9736A Class D amplifier
More informationMAX4951C Evaluation Kit Evaluates: MAX4951C
19-5944; Rev 0; 6/11 MAX4951C Evaluation Kit General Description The MAX4951C evaluation kit (EV kit) provides a proven design to evaluate the MAX4951C dual-channel buffer. The EV kit contains four sections:
More informationMAX14535E Evaluation Kit. Evaluates: MAX14535E
19-4510; Rev 0; 3/09 General Description The MAX14535E evaluation kit (EV kit) demonstrates the MAX14535E double-pole/double-throw (DPDT) analog switch featuring negative signal capability, low onresistance
More informationS +10.8V to +13.2V Supply Voltage S Output Voltages
19-5088; Rev 0; 12/09 General Description The MAX17113 evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that provides the voltages and features required for thin-film transistor
More informationFeatures. General Description. Component List
General Description The MAX5217 evaluation kit (EV kit) demonstrates the MAX5217, 16-bit, single-channel, low-power, buffered voltage-output DAC. The IC comes in an 8-pin µmax package. The EV kit provides
More informationS Proven PCB Layout S Fully Assembled and Tested. Maxim Integrated Products 1
19-5059; Rev 1; 4/10 General Description The MAX4951B evaluation kit (EV kit) provides a proven design to evaluate the MAX4951BE dual-channel redriver. The EV kit contains four sections: application circuit,
More informationEvaluate: MAX14589E/MAX14594E/ MAX MAX14589E/MAX14594E/ MAX14689 Evaluation Kits. Features and Benefits. General Description.
Evaluation Kits General Description The MAX14589E/MAX14594E/ evaluation kits (EV kits) are fully assembled and tested circuit boards that demonstrate the functionality of the MAX14589E, MAX14594E, and
More information+Denotes lead-free and RoHS-compliant
19-0997; Rev 0; 9/07 MAX4208 Evaluation Kit General Description The MAX4208 evaluation kit (EV kit) simplifies evaluation of the MAX4208 ultra-low offset/drift, adjustable gain, precision instrumentation
More information+Denotes lead-free and RoHS-compliant.
19-3107; Rev 0; 12/07 MAX1493 Evaluation Kit General Description The MAX1493 is a low-power, 4.5-digit analog-to-digital converter (ADC) with integrated liquid-crystal display (LCD) drivers. The MAX1493
More informationMAX17105 Evaluation Kit/Evaluation System
19-4589; Rev 0; 4/09 MAX17105 Evaluation Kit/Evaluation System General Description The MAX17105 evaluation system (EV system) consists of the MAX17105 evaluation kit (EV kit) and the Maxim CMAXQUSB+ command
More informationMaxim Integrated Products 1
19-2881; Rev 0; 6/03 General Description The MAX1543 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that provides the voltages and features required for active-matrix,
More informationS U1 Configured for Filterless Output S U2 Configured for Filtered Output S Fully Assembled and Tested. Maxim Integrated Products 1
19-5505; Rev 0; 9/10 MAX98400B Evaluation Kit General Description The MAX98400B evaluation kit (EV kit) configures the MAX98400B Class D amplifier to drive 2x12W into a pair of 8I speakers in stereo mode
More informationMAX4899AE Evaluation Kit. Evaluates: MAX4899AE/MAX4899E
19-4025; Rev 0; 1/08 General Description The MAX4899AE evaluation kit (EV kit) provides a proven design to evaluate the MAX4899AE USB 2.0 high-speed, fault-tolerant 4:1 multiplexer. The EV kit routes a
More information+Denotes lead(pb)-free and RoHS compliant. Maxim Integrated Products 1
19-4957; Rev 0; 9/09 General Description The MAX3162 evaluation kit (EV kit) provides a proven design to evaluate the MAX3162 programmable RS-232/ RS-485/422 multiprotocol transceiver. The MAX3162 EV kit
More information+Denotes lead(pb)-free and RoHS compliant.
19-4545; Rev 0; 4/09 General Description The MAX13235E evaluation kit (EV kit) provides a proven design to evaluate the MAX13235E, a 3Mbps RS-232 transceiver with low-voltage interface and enhanced electrostatic
More information+Denotes lead-free and RoHS compliant. C38 C43, C62, C64, C65, C66, C68, C70, C72, C73, C74, C76 C44 C49, C67, C75 C63, C69, C71, C77
19-4354; Rev 0; 10/08 MAX17108 Evaluation Kit General Description The MAX17108 evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that evaluates the MAX17108 10-channel, high-voltage
More information+Denotes lead-free and RoHS-compliant.
19-0993; Rev 0; 9/07 MAX4209 Evaluation Kit General Description The MAX4209 evaluation kit (EV kit) simplifies evaluation of the MAX4208 ultra-low offset/drift, fixed gain, precision instrumentation amplifier
More informationMaxim Integrated Products 1
9-366; Rev ; 2/06 General Description The MAX8727 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that contains a pulse-width-modulated (PWM) step-up DC-DC converter.
More informationMAX17048X/ MAX17049X Evaluation Kits (WLP)
19-6238; Rev 0; 3/12 General Description Features The MAX17048X/MAX17049X evaluation kits (EV kits) include the MAX17048X/MAX17049X EV kit and the Maxim DS91230+ command module. Windows XPM-, Windows VistaM-,
More informationMAX17048/MAX17049 Evaluation Kits Evaluate: MAX17048/ MAX17049
19-6239; Rev 0; 3/12 General Description The MAX17048/MAX17049 evaluation kits (EV kits) consist of the MAX17048/MAX17049 evaluation kit (EV kit) and the Maxim DS91230+ command module. A Windows XP M -,
More informationMAX8858 Evaluation Kit. Evaluates: MAX8858
19-4449; Rev 0; 2/09 General Description The MAX8858 evaluation kit (EV kit) is a fully assembled and tested PCB for evaluating the MAX8858 powermanagement IC (PMIC). The MAX8858 PMIC provides a compact
More informationMAX5705A, MAX5705B, MAX5803, MAX5804, MAX5805A, MAX5805B
General Description The MAX5X05 evaluation kit (EV kit) demonstrates the MAX5705 and MAX5805 12-bit, single-channel, lowpower DACs with internal reference and buffered voltage output. The MAX5705 and the
More information+Denotes lead-free and RoHS compliant.
19-4387; Rev 0; 11/08 MAX9675 Evaluation Kit General Description The MAX9675 evaluation kit (EV kit) provides a proven design to evaluate the MAX9675 nonblocking 16 x 16 video crosspoint switch with buffered
More informationMAX14972 Evaluation Kit Evaluates: MAX14972
19-6165; Rev 0; 12/11 MAX14972 Evaluation Kit General Description The MAX14972 evaluation kit (EV kit) provides a proven design to evaluate the MAX14972 dual SuperSpeed USB 3.0 equalizer/redriver utilizing
More informationEvaluates: MAX98357A/MAX98357B (TQFN) MAX98357 Evaluation System (TQFN)
General Description The MAX98357 development board (DEV board) is a fully assembled and tested PCB that evaluates the MAX98357 I2S digital input Class D power amplifier. The DEV board operates from a single
More informationMAX544X Evaluation Kit Evaluates: MAX5441 MAX5444
19-6314; Rev 0; 5/12 MAX544X Evaluation Kit General Description The MAX544X evaluation kit (EV kit) provides a proven design to evaluate the MAX5441 MAX5442 serial-input, voltage-output, 16-bit digital-to-analog
More informationMaxim Integrated Products 1
9-97; Rev 0; 8/04 MAX406 Evaluation Kit General Description The MAX406 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that demonstrates the MAX406 logarithmic amplifier.
More informationMAX3804 Evaluation Kit. Evaluates: MAX3804. Features DC-Coupled EV Kit SMA Connectors for All High-Speed Inputs and Outputs Fully Assembled and Tested
19-2821; Rev 1; 2/09 General Description The MAX3804 DC-coupled evaluation kit (EV kit) simplifies evaluation of the MAX3804 12.5Gbps settable equalizer. The EV kit enables full testing of the device functions
More informationMAX14830 Evaluation Kit Evaluates: MAX14830
19-6127; Rev 1; 7/12 MAX14830 Evaluation Kit General Description The MAX14830 evaluation kit (EV kit) provides a proven design to evaluate the MAX14830 quad-channel universal asynchronous receiver-transmitter
More informationMaxim Integrated Products 1
19-5229; Rev 0; 4/10 MAX14885E Evaluation Kit General Description The MAX14885E evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that utilizes the MAX14885E device to implement
More informationMAX17058/MAX17059 Evaluation Kits Evaluate: MAX17058/MAX17059
19-6189; Rev 1; 2/12 General Description The MAX17058 and MAX17059 evaluation kits (EV kits) consist of the MAX17058 and MAX17059 evaluation kit (EV kit) and the Maxim DS91230+ command module. Windows
More information+Denotes lead(pb)-free and RoHS compliant. C35 1 C36 1 D2 1 D3 1 FB1 1 P1 1
19-4306; Rev 0; 10/08 General Description The MAX9132 evaluation kit (EV kit) provides a proven design to evaluate the MAX9132 high-speed multipleport LVDS crossbar switches. The MAX9132 has three input
More information+Denotes lead-free and RoHS-compliant.
9-4067; Rev 0; /08 MAX95 Evaluation Kit General Description The MAX95 evaluation kit (EV kit) is a fully assembled and tested printed-circuit board (PCB) that simplifies the evaluation of the MAX95 400Mbps,
More informationS 16 Channels of Programmable Gamma S 10-Bit Resolution S On-Board Microcontroller to Generate I²C Commands
19-4918; Rev 0; 8/09 MAX9674 Evaluation Kit General Description The MAX9674 evaluation kit (EV kit) demonstrates the MAX9672/MAX9673/MAX9674 reference voltage generator for gamma correction in TFT-LCD
More informationS One SATA Host Connector S Two SATA Device Connectors
19-5166; Rev 0; 2/10 MAX4986 Evaluation Kit General Description The MAX4986 evaluation kit (EV kit) provides a proven design to evaluate the MAX4986 SAS/SATA 2:1/1:2 multiplexer/demultiplexer. The EV kit
More information+Denotes lead-free and RoHS compliant. JU5, JU6, JU9 JU13 LED1, LED3 LED14
19-4303; Rev 0; 10/08 MAX6956 Evaluation Kit General Description The MAX6956 evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that contains a MAX6956 IC. The MAX6956 is a 28-port
More information+Denotes lead(pb)-free and RoHS compliant.
19-4161; Rev 1; 12/08 MAX5498 Evaluation Kit General Description The MAX5498 evaluation kit (EV kit) is an assembled and tested PCB that demonstrates the MAX5498 10-bit (1024-tap), dual, nonvolatile, SPI
More information+Denotes lead-free and RoHS compliant.
19-4258; Rev 0; 8/08 General Description The MAX9591 evaluation kit (EV kit) demonstrates the MAX9591 reference-voltage generator for gamma correction in TFT-LCD panels, such as those found in highresolution
More informationMAX44000PMB1 Peripheral Module
19-6335; Rev 0; 5/12 MAX44000PMB1 Peripheral Module General Description The MAX44000PMB1 peripheral module provides the necessary hardware to interface the MAX44000 ambient and infrared proximity sensor
More informationMAX17061 Evaluation Kit/Evaluation System
19-4070; Rev 1; 10/08 MAX17061 Evaluation Kit/Evaluation System General Description The MAX17061 evaluation system (EV system) consists of the MAX17061 evaluation kit (EV kit) and the Maxim CMAXQUSB+ command
More informationMAX54X Evaluation Kit Evaluates: MAX541/MAX542
19-6340; Rev 0; 5/12 MAX54X Evaluation Kit General Description The MAX54X evaluation kit (EV kit) provides a proven design to evaluate the MAX541/MAX542 serial-input, voltage-output, 16-bit digital-to-analog
More informationMAX3535E Evaluation Kit. Evaluates: MAX3535E
9-076; Rev 0; /06 MX55E Evaluation Kit General Description The MX55E evaluation kit (EV kit) is a fully assembled and tested PC that contains a 500V RMS isolated RS-485/RS-4 transceiver with ESD protection.
More informationMAX13335E Evaluation Kit Evaluates: MAX13335E/MAX13336E
19-6290; Rev 0; 4/12 General Description The MAX13335E evaluation kit (EV kit) is a fully assembled and tested PCB that evaluates the MAX13335E automotive audio receiver. The IC features a dual automotive
More informationMAX31723PMB1 Peripheral Module
19-6332; Rev 0; 5/12 MAX31723PMB1 Peripheral Module General Description The MAX31723PMB1 peripheral module provides the necessary hardware to interface the MAX31723 digital thermometer and thermostat to
More informationMaxim Integrated Products 1
9-904; Rev 0; 7/0 MAX406 Evaluation Kit General Description The MAX406 evaluation kit (EV kit) is a fully assembled and tested circuit board that uses the MAX406 lownoise microphone amplifier IC designed
More informationMAX3161E Evaluation Kit. Evaluates: MAX3161E. Features
19-0803; Rev 0; 4/07 MX3161E Evaluation Kit General Description The MX3161E evaluation kit (EV kit) circuit demonstrates the RS-232/RS-485/RS-422 multiprotocol transceivers using the MX3161E IC. The circuit
More information+Denotes lead(pb)-free and RoHS compliant. R1, R2, R3, R103
19-4544; Rev 0; 4/09 MAX6662 Evaluation Kit General Description The MAX6662 evaluation kit (EV kit) provides a proven design to evaluate the MAX6662 12-bit + sign temperature sensor with SPI -compatible
More informationS 27-Bit Parallel Interface S Rosenberger Connector (Cable Included) S Proven PCB Layout S Fully Assembled and Tested. Maxim Integrated Products 1
19-90; Rev 0; 9/09 MAX97/MAX98 Evaluation Kit General Description The MAX97/MAX98 evaluation kit (EV kit) provides a proven design to evaluate the MAX97 7-bit,.5MHz to MHz DC-balanced LVDS serializer and
More informationC2, C18, C19, C20, C24
19-4550; Rev 0; 4/09 General Description The MAX17088 evaluation system (EV system) consists of the MAX17088 evaluation kit (EV kit) and the Maxim CMAXQUSB command module. Windows 2000/XP - and Windows
More informationMAX6620 Evaluation Kit/Evaluation System
19-4069; Rev 0; 3/08 MAX6620 Evaluation Kit/Evaluation System General Description The MAX6620 evaluation system (MAX6620EVCMAXQU+) consists of the MAX6620 evaluation kit (MAX6620EVKIT+) and the Maxim CMAXQUSB+
More informationMAX15501 Evaluation Kit Evaluates: MAX15500/MAX15501
General Description The MAX15501 evaluation kit (EV kit) provides a proven design to evaluate the MAX15501 analog output conditioner that provides a programmable current up to Q24mA, or a voltage up to
More informationMAX9611PMB1 Peripheral Module
9-68; Rev 0; 5/ General Description The MAX96PMB peripheral module provides the necessary hardware to interface the MAX96 currentsense amplifier with -bit ADC and op amp, along with the MAX580 8-bit DAC,
More informationMAX1587AEVKIT. Maxim Integrated Products 1
19-3137; Rev 1; 2/07 General Description The MAX1587A evaluation system (EV system) consists of a MAX1587A evaluation kit (EV kit) and a companion Maxim CMAXQUSB board. The MAX1587A evaluation kit (EV
More informationS 8V to 24V Input Operation S Software Controlled. S Monitor Outputs for
19-5201; Rev 0; 3/10 MAX17435 Evaluation Kit General Description The MAX17435 evaluation kit (EV kit) is an assembled and tested PCB that evaluates the MAX17435 IC. The MAX17435 is a multichemistry battery
More information+Denotes lead(pb)-free and RoHS compliant. 0.1µF ±10%, 50V X7R ceramic capacitor (0603) TDK C1608X7R1H104K C32 1 D2 1 H1 0 JUA JUE 0
19-4987; Rev 0; 9/09 General Description The MAX6948 evaluation kit (EV kit) provides a proven design to evaluate the MAX6948B 5-port, constantcurrent LED driver with PWM intensity control and integrated
More informationMAX5216PMB1 Peripheral Module
9-6; Rev 0; 5/ MAX56PMB Peripheral Module General Description The MAX56PMB peripheral module provides the necessary hardware to interface the MAX56 6-bit DAC to any system that utilizes PmodK-compatible
More informationEvaluates: MAX MAX31865PMB1 Peripheral Module. General Description. Features and Benefits. Peripheral Module Board Photo
General Description The MAX31865PMB1 peripheral module (Pmod ) provides the necessary hardware to interface the MAX31865 RTD-to-digital converter to any system that utilizes Pmodcompatible expansion ports
More informationMaxim Integrated Products 1
19-3093; Rev 0; 12/03 MAX3942 Evaluation Kit General Description The MAX3942 evaluation kit (EV kit) is an assembled demonstration board that provides electrical evaluation of the MAX3942 10.7Gbps modulator
More informationMAX1379 Evaluation Kit. Evaluates: MAX1379
19-4296; Rev 0; 10/08 General Description The MAX1379 evaluation kit (EV kit) is a fully assembled and tested PCB that evaluates the MAX1379 dual, 12-bit, 1.25Msps, simultaneous sampling ADC. The EV kit
More informationMAX11205PMB1 Peripheral Module
9-60; Rev 0; / MAX0PMB Peripheral Module General Description The MAX0PMB peripheral module provides the necessary hardware to interface the MAX0 6-bit ADC to any system that utilizes PmodK-compatible expansion
More informationMAX14521E Evaluation Kit. Evaluates: MAX14521E
19-4422 Rev 0; 1/09 General Description The MAX14521E evaluation kit (EV kit) provides a proven design to evaluate the MAX14521E quad, highvoltage EL lamp drivers. The EV kit also includes Windows 2000/XP-
More informationMAX3160E Evaluation Kit. Evaluates: MAX3160E. Features
9-076; Rev 0; 4/07 MAX60E Evaluation Kit General Description The MAX60E evaluation kit (EV kit) circuit demonstrates the RS-/RS-485/RS-4 multiprotocol transceivers using the MAX60E IC. The circuit can
More informationS On-Board Microcontroller to Generate I²C Commands. S Easy-to-Use, Menu-Driven Software S USB-PC Connection (Cable Included)
19-5619; Rev 0; 11/10 MAX9611 Evaluation Kit General Description The MAX9611 evaluation kit (EV kit) is an assembled and tested PCB used to evaluate the MAX9611 high-side current-sense amplifier with an
More informationMAX6651 Evaluation Kit/Evaluation System
19-1980; Rev 1; 5/07 MAX6651 Evaluation Kit/Evaluation System General Description The MAX6651 evaluation kit (EV kit) is an assembled and tested printed-circuit board (PCB) that demonstrates the MAX6651
More informationCLK1, CLKIN, CLKOUT, OUTA, OUTB
9-82; Rev 2; 5/ Evaluation Kit General Description The evaluation kit (EV kit) is a fully assembled and tested circuit board that contains all the components necessary for evaluating the. The is a dual,0-bit,
More informationMaxim Integrated Products 1
19-1883; Rev 1; 2/07 MAX1799 Evaluation System/ General Description The MAX1799 evaluation system (EV system) consists of a MAX1799 evaluation kit (EV kit) and a companion Maxim CMAXQUSB board. The MAX1799
More informationMAX3232PMB1 Peripheral Module
19-6319; Rev 0; 5/12 MAX3232PMB1 Peripheral Module General Description The MAX3232PMB1 peripheral module provides the necessary hardware to interface the MAX3232E true RS-232 transceiver to any system
More informationEvaluates: MAX MAX20310 Evaluation Kit. Quick Start. General Description. Features. Detailed Description of Hardware. Required Equipment
General Description The MAX20310 evaluation kit (EV kit) is a fully assembled and tested circuit for evaluating the MAX20310 medical wearable, power-management solution with I2C capability for low-power
More informationMaxim Integrated Products 1
19-3717; Rev 1; 11/05 MAX1179 Evaluation Kit General Description The MAX1179 evaluation kit (EV kit) is an assembled and tested circuit board that demonstrates the MAX1179 analog-to-digital converter.
More informationC10, C12, C14 3 C11, C13, C15, C16 C18, C19, C20 3. Maxim Integrated Products 1
9-57; Rev. 0; 7/0 MAX70 Evaluation Kit General Description The MAX70 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that demonstrates the MAX70B power-management IC.
More informationJU1 JU6, JU15 JU20. Maxim Integrated Products 1
9-9; Rev 0; /0 MAX9 Evaluation Kit General Description The MAX9 evaluation kit (EV kit) contains a flowthrough low-voltage differential signaling (LVDS) quad differential line driver (MAX9) and receiver
More informationFeatures. General Description. Ordering Information. Component List
General Description The MAX2117 evaluation kit (EV kit) simplifies the testing and evaluation of the device direct-conversion tuner. The evaluation kit is fully assembled and tested at the factory. Standard
More informationEvaluates: MAX2120. MAX2120 Evaluation Kit. General Description. Features. Ordering Information. Component List
General Description The MAX2120 evaluation kit (EV kit) simplifies the testing and evaluation of the IC direct-conversion tuner. The evaluation kit is fully assembled and tested at the factory. Standard
More informationMAX3983 SMA Connector Evaluation Kit
19-3340; Rev 0, 7/04 MAX3983 SMA Connector Evaluation Kit General Description The MAX3983 SMA Connector evaluation kit (EV Kit) is an assembled demonstration board that provides electrical evaluation of
More informationMAX7311 Evaluation Kit. Evaluates: MAX7311
19-4151; Rev 0; 5/08 General Description The MAX7311 evaluation kit (EV kit) provides a proven design to evaluate the MAX7311 I 2 C-compatible 16-bit I/O port expander, with each port configurable as input
More informationMAX9768 Evaluation Kit/Evaluation System
9-; Rev 0; /07 MAX9768 Evaluation Kit/Evaluation System General Description The MAX9768 evaluation kit (EV kit) is a fully assembled and tested printed-circuit board (PCB) that demonstrates the capabilities
More informationMAX6653 Evaluation System/Evaluation Kit
9-908; Rev 0; 7/0 MAX665 Evaluation System/Evaluation Kit General Description The MAX665 evaluation system (EV system) consists of a MAX665 evaluation kit (EV kit) and a companion Maxim system management
More informationMAX6642 Evaluation System/Evaluation Kit
19-3417; Rev 0; 9/04 MAX6642 Evaluation System/Evaluation Kit General Description The MAX6642 evaluation kit (EV kit) is an assembled and tested PC board with a mounted MAX6642. The EV kit allows full
More informationEvaluates: MAX MAX20326 Evaluation Kit. General Description. Quick Start. Features. EV Kit Contents. Required Equipment.
General Description The MAX20326 evaluation kit (EV kit) provides a convenient way to evaluate the MAX20326 dual precision bus accelerator IC. The EV kit breaks out the pins of the IC to test points enabling
More informationMAX17065 Evaluation Kit. Evaluates: MAX17065
19-4310; Rev 0; 10/08 MAX17065 Evaluation Kit General Description The MAX17065 evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that evaluates the high-efficiency MAX17065 organic
More informationEvaluates: MAX40009/MAX MAX40009 Evaluation Kit. Quick Start. General Description. Procedure. Features. Required Equipment
General Description The MAX40009 evaluation kit (EV kit) is a fully assembled and tested PC board that evaluates the MAX40008/ MAX40009 single comparator with shutdown input. This EV kit comes with a push-pull
More informationINSTALL.EXE. Maxim Integrated Products 1
9-258; Rev 0; 9/02 MAX06 Evaluation Kit General Description The MAX06 evaluation kit (EV kit) is designed to evaluate the MAX06. The MAX06 is an 8-bit four-channel (two-differential-channel) ADC with a
More informationS USB-PC Connection (Cable Not Included) S USB Powered (No External Power Supply Required) S Real-Time Data Acquisition Through the USB
19-5610; Rev 1; 8/11 MAXADClite Evaluation Kit General Description The MAXADClite evaluation kit (EV kit) evaluates the MAX11645, Maxim's smallest, very-low-power, 12-bit, 2-channel analog-to-digital converter
More information