OCMR Optical Communications Mainframe with Redundant power supplies

Transcription

1 About the Product The with redundant power supply capability is the second generation Optical Communications Mainframe Chassis which forms the backbone of the Light Link Series 3 product range. The chassis is fully backward compatible with PBN s complete range of optical, RF, and data modules to suit CATV, Ethernet, FTTC, FTTH, HFC and telecommunication applications. The new design employs the same form factor as its predecessor, the OCMC, still 5 RU high, 19 rack mountable, but now with 10 slots for high density applications and full power redundancy. Comprehensive control and monitoring of the OCM is included in the chassis itself, with a 4 line LCD and keypad to navigate through any of the modules various monitoring and control features. As a crucial element in any small or large city optical network, the is designed with fully modular and hot-swappable active parts which allow for continual system operation, providing uninterrupted services to the end subscriber. The can be optioned with an integrated SNMP agent and Ethernet port. This makes it possible to monitor and control an chassis through an IP network with PBN s NMS3-NetCraft software or an SNMP manager. Copyright 2010 Pacific Broadband Networks (PBN). All rights reserved. Reproduction without consent is prohibited. 1/6

2 Features 5 RU high, 19" wide, 10 slot chassis for PBN designed plug in modules. Can be equipped with dual, hot-swappable power supplies for redundant power applications. Large LCD panel for easy setup of modules and system monitoring. IEC297 compatible 19" rack. Space below modules for optical fibre patch cords and RF cable access. Mountable at ½ RU intervals allowing maximum use of rack space in communications cabinets. Horizontal, fan forced airflow permits the mounting of multiple without the need for rack space clearance between chassis. Local monitoring of system and modules via USB port. Remote monitoring via optional integrated SNMP agent and web server (HTTP) through 10Base-T Ethernet port for system wide, NMS3 network management. Hot-swappable front panel display and micro-controller assembly. Remote monitoring and control features with the SNMP option During normal operation the OCM user interface runs in status monitoring mode where it continuously checks the entire chassis for urgent alarm conditions. If any of the plug-in modules report an urgent failure, the LCD display will flash and the alarm condition is made available via the software for remote monitoring computers. The also monitors various other module parameters for non-urgent alarm conditions. The employs an optional NMS3 network element manager which acts as a Simple Network Management Protocol (SNMP) agent and a web server for monitoring via a web browser. The SNMP agent and web server are available through a rear mounted, RJ45 (10Base-T) Ethernet port. The SNMP option is supplied with a PBN Management Information Base (MIB) as well as PBN s NMS3- NetCraft software for Windows XP workstations. The PBN MIB is complementary to the Society of Cable Telecommunications Engineers (SCTE) published HMS standard MIB's. The is fully compatible with PBN NMS3-Enterprise II and NMS3-EPSM, with BarcoNet ROSA, with HP Open View, with CA Unicenter, with Castle Rock, with NuDesign and with many other standards based SNMP monitoring packages. Please refer to our datasheets for NMS3-NetCraft, Enterprise II and NMS3-EPSM for more details on the comprehensive network management features, the operational supports systems, the provisioning systems and the billing systems. Copyright 2010 Pacific Broadband Networks (PBN). All rights reserved. Reproduction without consent is prohibited. 2/6

3 NMS3 Network Management System Components NMS3 - EPSM NMS3 - Enterprise II NMS3 - Netcraft SNMP Light Link Series 2 Light Link Series 3 Specifications Chasis Module slots Alarms Monitoring and control Ethernet port IP address setting NMS3-NetCraft-CD 10 x OCM plug and play module capable Directly to front panel LCD, remotely to, NO and NC alarm relay contact Integrated 4-line LCD display and keypad, USB port for local monitoring via laptop, SNMP network option with Ethernet port for remote monitoring and control via NMS3-NetCraft and NMS3-Enterprise-II systems. 10Base-T, RJ45 socket (only with SNMP option) Automatically via DHCP or use static address through front panel keypad and LCD. (only with SNMP option) Configuration software on CD. (Supplied as a free inclusion to with SNMP option) Copyright 2010 Pacific Broadband Networks (PBN). All rights reserved. Reproduction without consent is prohibited. 3/6

4 OCMPS Electrical Performance General Power supply modules Power input Inrush current Cooling Up to 2 hot swappable modules in the top tray of. One power supply can power a fully loaded chassis. 2 power supplies provide redundancy in case of single power supply failure. 90 Vac to 264 Vac, 50/60 Hz 90 Vac to 264 Vac, 50/60 Hz -45 Vdc to -62 Vdc 2.5 A max 10 A max In-built, thermistor controlled cooling fans. Two fans per power supply module. Power rails - OCMPS 26.0 V, 4.0 A max, 14.5 V, 3.0 A max, V, 1.0 A max 7.5 V, 7.0 A max OCMPS-HP Operating temperature 0 C to 45 C Cooling Maximum heat generation Dimensions (HxWxD) OCMPS-[*] / OCMFAN Ship size (HxWxD) OCMPS-[*] / OCMFAN Weight OCMFAN Ship weight OCMFAN 26.5 V, 9.5 A max, 14.5 V, 9.0 A max, V, 1.0 A max 7.5 V, 10 A max Via cooling fans in OCMPS-* and OCMFAN modules 870 BTU/h for a fully loaded chassis 225 x 485 x 440 mm 50 x 210 x 350 mm 400 x 600 x 600 mm 70 x 280 x 570 mm 6.5 kg 2.2 kg 2.0 kg 2.0 kg 1.0 kg 13 kg 3.2 kg 2.6 kg 2.6 kg 1.6 kg Copyright 2010 Pacific Broadband Networks (PBN). All rights reserved. Reproduction without consent is prohibited. 4/6

5 Order Details -0 -SNMP -SNMP-2B Chassis, empty. Chassis with SNMP module. Chassis with SNMP module, with 2 x 48 V battery power supply modules. -SNMP-ARC Chassis with SNMP module, with Alarm Relay Connection (ARC) providing relay output triggered by urgent alarms. No power supplies. -SNMP-AU -SNMP-CN -SNMP-EU -SNMP-HP -SNMP-UK -SNMP-US mains cables for Australia GPO. mains cables for mainland China GPO. mains cables for continental Europe GPO. Chassis with SNMP module, with 2 x 470 W mains power supply modules, with 2 x mains cables for each AU/CN/EU/UK/US. mains cables for United Kingdom GPO. mains cables for USA GPO. Power and cooling modules for chassis Power supply module with fans for 90~264 Vac 50/60 Hz. 300 W Power supply module with fans for -48 Vdc. 300 W Power supply module with fans for 90~264 Vac 50/60 Hz. 472 W Required for QOLTM deployments OCMFAN Fan module for ** ** Note: If more than 5 modules are loaded in a chassis, then for the purpose of adequate cooling either a second OCMPS-[X] power supply module or an OCMFAN module needs to be installed. The fan module is powered from the chassis rails and does not need a power cord. Copyright 2010 Pacific Broadband Networks (PBN). All rights reserved. Reproduction without consent is prohibited. 5/6

6