ClearCount 3D Video People Counter

Transcription

1 ClearCount 3D Video People Counter The ClearCount 3D Video line uses 3-D advanced stereo vision tracking technology to provide accurate people counting data under a broad set of environmental conditions. ClearCount 3D Video includes external digital I/O support. This enables integration with up to three external pulse/relay devices such as people counters, sensors, DVR systems, door controllers, and electronic article surveillance (EAS) systems. Up to three sensors can be linked to cover wide entrances. TCP/IP connectivity is used to collect traffic data for up to six areas of interest with unlimited counting lines. It monitors multiple people entering and exiting at the same time and accurately distinguishes between children, adults and other objects such as shopping carts. ClearCount 3D Video PC-VID3-2.5NA Vea Software on premise for reporting and monitoring (SAAP) Data transmission and power are provided over your local or wide area network. Onboard flash storage ensures data is protected against network failures for up to 80 days and all data is maintained during a power outage. This system is ideal for wide openings, dynamic lighting, heavy traffic areas and various traffic patterns. Optional features include recessed and extension mounting, tilt and outdoor models.* Accurately counts for indoor, outdoor*, varying lighting and temperatures and heavy traffic environments Simultaneously counts and defines adults, children and groups Collects, stores and delivers data in configurable intervals Sorts and omits objects based on height, shape and size such as children, shopping carts and strollers Privacy blur option available for sensitive counting environments* IP addressable, enabling remote management and support Streaming or recorded digital video for remote data validation

2 ClearCount 3D Video People Counter Mounting Options Recessed Mounting and tilt provide flexible options for installation. ClearCount 3D Video PC-VID3-2.5NA Vea Software on premise for reporting and monitoring (SAAP) Ceiling Mounting is the traditional way to install the ClearCount 3D Video Sensor. Outdoor is an optional feature using a weather tight box to protect the sensor from the elements. Extension Pole Mounting uses a 22 to 40 inch adjustable telescoping pole to mount the sensor to a wall when ceiling mounting is unavailable. Can be used with or without management wire shroud. * Please contact a sales representative regarding mounting options.

3 ClearCount 3D Video People Counter Technical Information PARAMETER MIN MAX Supply Voltage Maximum 4.5 Watts. Power over Ethernet (PoE) or 24 Volts DC external Lens Detection Height with mm lens Width/Depth of Detection Area** 5.4 width/3.8 depth 17.9 width/ 13.2 depth Count Zones 1 6 Count Lines Unlimited Logging Interval 1 minute 60 minutes Hours of Video Saved Onboard 1 GB/ ~24 hours Minimum Light Requirement 2 lux or greater Data Saved Onboard*** : Indicator Lights Input/Output Over 80 days of data at a one minute granularity for a single count zone Over 20 days of data for six counting zones 2.6 x 6.1 x 1.3 (66mm x 155mm x 33mm) 3 tri-state (red, amber, green) LED Terminal block for 1 alarm input, 2 output, 10 pin I/O and RS-485 *Outdoor-Optional feature. Contact SenSource for more information **Detection area contingent upon mounting height ***Data storage dependent on number of zones and level of granularity on a device ClearCount 3D Video PC-VID3-2.5NA Vea Software on premise for reporting and monitoring (SAAP) DATA DESCRIPTION FREQUENCY AVG BANDWIDTH REQUIRED Use of Web-Based Configuration Utility Initial ~ 128 kbps* Transmission of Validation Video Initial ~ 128 kbps* Transmission of XML Data, Time Sync, Diagnostic/Logging Ongoing ~ 0.05 kbps** *Dependent upon client bandwidth available at facility **Assumes single-zone counting captured/delivered at 5 minute intervals DATA DESCRIPTION PROTOCOL DEFAULT PORT DIRECTION XML Data, Time Sync, Diagnostics/Logging HTTP TCP 2010 Outbound Validation Video FTP/FTPS TCP 21/990 Outbound Web-Based Configuration Utility HTTP/HTTPS TCP 80/443 Inbound Ping ICMP Inbound Firmware Updates TFTP UDP 69 Inbound

4 ClearCount Active IR People Counter This Intelligent Sensor uses active infrared 3D video tracking technology to provide accurate people counting data under a broad set of environmental conditions with or without lighting. TCP/IP with POE connectivity is used to collect traffic data for an area of interest with up to five counting lines. It monitors multiple people entering and exiting at the same time and accurately distinguishes between children, adults and other objects such as shopping carts. Data transmission and power are provided over your local or wide area network. Onboard Flash storage ensures data is protected against network failures for up to 30 days and all data is maintained during a power outage. This system is ideal for wide openings, dynamic lighting, complete darkness, heavy traffic areas and various traffic patterns. Accurately counts for heavy traffic environments and poor lighting conditions Simultaneously counts and defines adults and children Sorts and omits objects based on height, shape and size such as children, shopping carts and strollers Performs accurately despite environmental changes such as ambient lighting, temperature, shadows, etc. No additional in-store devices required Collects, stores and delivers data in configurable intervals IP addressable, enabling remote management and support Low-profile enclosure easily mounts overhead Streaming or recorded digital video for remote data validation Can be setup with master/node to cover wide entrances using a single cable run ClearCount Active IR, PC-VAIR-5-N ClearCount Active IR in black enclosure, PC-VAIR-5-NB Vea Software on premise for reporting and monitoring (SAAP)

5 ClearCount Active IR People Counter Mounting Options Recessed Mounting creates a discrete look by using a cover over the face of the sensor and placing the sensor inside a ceiling tile. ClearCount Active IR, PC-VAIR-5-N ClearCount Active IR in black enclosure, PC-VAIR-5-NB Vea Software on premise for reporting and monitoring (SAAP) Ceiling Mounting is the traditional way to install the Active Infrared Series Camera. Extension Pole Mounting uses a 22 to 40 inch adjustable telescoping pole to mount the sensor to a wall when ceiling mounting is unavailable. * Please contact a sales representative regarding mounting options.

6 ClearCount Active IR People Counter Technical Information PARAMETER MIN MAX Supply Voltage Power over Ethernet (PoE) Lens Detection Height Width/Depth of Detection Area 5.76 wide / 4.32 deep wide / deep Count Zones 1 5 Count Lines 1 5 Count Interval 1 minute 10 minutes Hours of Video Saved Onboard 8 GB onboard memory; Up to three 1 hour videos at a time 7.28 x 2.76 x 2.05 Indicator Lights LED indicates the status of power, internet and sensors Input/Output 4 input and 4 output pins; RS 232; RS 422 or RS 485 is available on request Operating Temperature 32 F 104 F Minimum Light Requirement None, counts in total darkness ClearCount Active IR, PC-VAIR-5-N ClearCount Active IR in black enclosure, PC-VAIR-5-NB Vea Software on premise for reporting and monitoring (SAAP)

7 ClearCount Dual View Thermal People Counter Using thermal imaging technology, the ClearCount Dual View Thermal line senses human infrared radiation for highly accurate traffic monitoring beneath the sensor while providing a video stream to aid in remote configuration and validation of system performance. Mounted above the entryway, this system is ideal for wide openings, heavy traffic areas and various traffic patterns. The ClearCount Dual View Thermal line uses TCP/IP connectivity and includes multiple configurable counting modes, all remotely accessible for calibration. Data transmission is communicated over your local or wide area network. Up to 8 units (master and nodes) can be connected to create a detection area for very wide entrances. The added video capability provides a live image of the detection area. The new low-profile design features a sleek, unobtrusive bulkhead mounting with enclosures available in black or white. A recessed option is also available for true in-ceiling mounting. The new design also boasts Power over Ethernet (PoE). SenSource Vea Analytics Software completes this solution for a superior traffic monitoring and decision making solution. SenSource can provide complete validation services to ensure your system is operating accurately.* 60 Lens*: ClearCount Dual View Thermal, PC-THI60V-GMF-W white enclosure 40 Lens*: ClearCount Dual View Thermal, PC-THI40V-GMF-W white enclosure *Recess mount or black enclosure options available upon request Vea Software on premise for reporting and monitoring (SAAP) Power over Ethernet (PoE) Integrated video camera for configuration and verifiable counting performance 60 and 40 lens options available for use over a wide range of mounting heights from 7.5 to 24.6 Built in relays for data input and output functions (2 input, 2 output) Up to 16 count lines and 32 count registers for multi-directional counting and additional advanced line logic operations Internal memory stores a minimum of 4608 records or 195 days at 1 hour logging intervals Not sensitive to lighting conditions. Can work accurately in complete darkness The software calibration tool enables simultaneous video and thermal imaging views in near real-time

8 ClearCount Dual View Thermal People Counter Technical Information PARAMETER 60 LENS 40 LENS Width of Detection Area * Mounting Height Supply Voltage Supply Current Detection Speed Range Operating Temperature (non-condensing) Count Lines and Registers Count Modes Multiple Sensors for Wide Entrances (2.27M- 4.23M) (2.50M- 4.50M) 12-28V or PoE mA 0.5ms-1-3ms F / 0-40 C (2.46M-4.39M) (4.00M-7.00M) 7.48 x 4.37 x 2.48 deep (190mm x 111mm x 63mm deep) Count lines can be set to count in both directions (e.g. in and out ). Up to 16 count lines and 32 registers can be implemented in any device or wide opening network, allowing for bidirectional counting in up to 8 directions. A register holds count values derived from people crossing count lines. The additional registers can be used in association with the advanced count line logic to provide additional information outputs. The lines may be user-configured in a number of ways. Various count modes are available, including: a. Count increment as soon as a person crosses line b. Count increment when line crossed and then person leaves field of view c. Ignore or register U-turns d. Count every line crossing or only the first line crossing In a wide opening situation up to 8 people counters can be linked together and configured as a single unit with a wide footprint. People moving between the fields of view of each counter will be tracked. Count lines can be configured in a variety of formats. A single pair of count lines can be implemented across all 8 units or alternatively, several pairs of count lines can be placed at any point in the extended field of view. 60 Lens*: ClearCount Dual View Thermal, PC-THI60V-GMF-W white enclosure 40 Lens*: ClearCount Dual View Thermal, PC-THI40V-GMF-W white enclosure *Recess mount or black enclosure options available upon request Vea Software on premise for reporting and monitoring (SAAP) EXTENSION POLE MOUNTING uses a 22 to 40 adjustable telescoping pole to mount the sensor to a wall when ceiling mounting is unavailable. Sold separately. * Contact SenSource for complete details on validation services ** Detection area width contingent upon mounting height

9 ClearCount Thermal People Counter Using thermal imaging technology, the ClearCount Thermal line senses human infrared radiation for highly accurate traffic monitoring beneath the sensor. Mounted above the entryway, this system is ideal for wide openings, heavy traffic areas and various traffic patterns. The ClearCount Thermal line uses TCP/IP connectivity and multiple configurable counting modes, all remotely accessible for calibration. Data transmission is communicated over your local or wide area network. Up to 8 units (master and nodes) can be connected to create a detection area for very wide entrances. The new low-profile design features a sleek, unobtrusive bulkhead mounting with enclosures available in black or white. A recessed option is also available for true in-ceiling mounting. The new design also boasts Power over Ethernet (PoE). SenSource Vea Analytics Software completes this solution for a superior traffic monitoring and decision making solution. 60 Lens*: PC-THI60-GMF-W white enclosure 40 Lens*: PC-THI40-GMF-W white enclosure *Recess mount or black enclosure options available upon request Vea Software on premise for reporting and monitoring (SAAP) Power over Ethernet (PoE) 60 and 40 lens options available for use over a wide range of mounting heights from 7.5 to 24.6 Connect up to 8 units for seamless tracking across wide openings and spaces up to 118 wide Built in relays for data input and output functions (2 input, 2 output) Up to 16 count lines and 32 count registers for multi-directional counting and additional advanced line logic operations Internal memory stores a minimum of 4608 records or 195 days at 1 hour logging intervals Not sensitive to lighting conditions. Can work accurately in complete darkness

10 ClearCount Thermal People Counter Technical Information PARAMETER 60 LENS 40 LENS Width of Detection Area * Mounting Height Supply Voltage Supply Current Detection Speed Range Operating Temperature (non-condensing) Count Lines and Registers Count Modes Multiple Sensors for Wide Entrances (2.27M- 4.23M) (2.50M- 4.50M) 12-28V or PoE mA 0.5ms-1-3ms F / 0-40 C (2.46M-4.39M) (4.00M-7.00M) 7.48 x 4.37 x 2.48 deep (190mm x 111mm x 63mm deep) Count lines can be set to count in both directions (e.g. in and out ). Up to 16 count lines and 32 registers can be implemented in any device or wide opening network, allowing for bidirectional counting in up to 8 directions. A register holds count values derived from people crossing count lines. The additional registers can be used in association with the advanced count line logic to provide additional information outputs. The lines may be user-configured in a number of ways. Various count modes are available, including: a. Count increment as soon as a person crosses line b. Count increment when line crossed and then person leaves field of view c. Ignore or register U-turns d. Count every line crossing or only the first line crossing In a wide opening situation up to 8 people counters can be linked together and configured as a single unit with a wide footprint. People moving between the fields of view of each counter will be tracked. Count lines can be configured in a variety of formats. A single pair of count lines can be implemented across all 8 units or alternatively, several pairs of count lines can be placed at any point in the extended field of view. 60 Lens*: PC-THI60-GMF-W white enclosure 40 Lens*: PC-THI40-GMF-W white enclosure *Recess mount or black enclosure options available upon request Vea Software on premise for reporting and monitoring (SAAP) EXTENSION POLE MOUNTING uses a 22 to 40 adjustable telescoping pole to mount the sensor to a wall when ceiling mounting is unavailable. Sold separately.

11 Hosted Data & Reporting With Wi-Fi People Counter SenSource s Hosted Wi-Fi sensors send your foot traffic counts to you quickly, easily and without any additional hardware. There is no software to install and no server requirements. The PC-TB12N-WR features a built-in Wi-Fi transmitter that communicates to your existing Wi-Fi network. After installation, all of your traffic reports are available using xtrend web-based platform. The battery-powered counter installs in minutes. A non-directional counter, the PC-TB12N-WR is both front and side-firing to accomodate a variety of entry styles. The two-part break-beam system covers openings up to 25 feet wide. Hosted PC-TB12N-WR, Gray Hosted PC-TB12N-WRB, Black xtrend Platform Reporting Using xtrend web-based platform, traffic data and reports are available on demand. This easy to use platform also sends automated reports and can extract data to a spreadsheet. Report options include: Total Traffic Counts by Hour for the Day Total Traffic Counts by Day for the Week Traffic Counts by Week for the Month Secure Server Data Center owned by SenSource Battery-powered sensor installs in minutes Easily configure sensor settings through USB Mounting options: Front-firing (opposing wall mount) or Side-firing (doorframe mount)

12 Hosted Data & Reporting With Wi-Fi People Counter REQUIREMENTS Wireless network: b or g Wireless access point: No further than 100 ft from sensors Wireless authentication type: WEP-128, WPA-PSK, WPA2-PSK or unsecured Customer IT personnel or third party IT personnel is needed to make changes to customer s router, firewall or switches to allow bi-directional communication during initial system setup. Hosted PC-TB12N-WR, Gray Hosted PC-TB12N-WRB, Black xtrend Platform PARAMETER MIN TYP MAX IR Sensor Range 1ft - 25 ft Battery Life - 6 months* 1 year* Battery Type (4) Lithium 3.6V, Size AA 2.0 W x 4.3 L x 1.2 H ABS Plastic *Wi-Fi network settings affect battery life Built in Wi-Fi transmitter communicates to your existing Wi-Fi network Two-part break-beam covers openings up to 25 feet wide

13 900 MHz Wireless Non-Directional People Counter SenSource s Hosted PC-TB12-W9 sensors send your foot traffic counts to you quickly, easily with no server requirements. The PC-TB12-W9 features a built-in 900 MHz transmitter that communicates to a Sensor Server data receiver. The Sensor Server communicates directly to a SenSource secure server. After installation, all of your traffic reports are available using xtrend web-based platform. The battery-powered counter installs in minutes. A non-directional counter, the PC-TB12-W9 is both front and side-firing to accomodate a variety of entry styles. The two-part break-beam system covers openings up to 25 feet wide. One Sensor Server per location required for data monitoring and reporting. Reporting Using xtrend web-based platform, traffic data and reports are available on demand. This easy to use platform also sends automated reports and can extract data to a spreadsheet. Report options include: Total Traffic Counts by Hour for the Day Total Traffic Counts by Day for the Week Traffic Counts by Week for the Month Hosted PC-TB12-W9, Gray Hosted PC-TB12-W9B, Black Sensor Server data receiver, PCW- SSRX4.9 xtrend Platform *If ordering more than 5 PC-TB12- W9 sensors, ask about Vea Analytics Software 900 MHz transmitter for data retrieval and system monitoring Battery-powered sensor installs in minutes 6-digit LCD display indicates counter value and set-up parameters Front-firing (opposing wall mount) or Side-firing (doorframe mount) PARAMETER MIN TYP MAX IR Sensor Range 1ft - 25 ft Radio Transmission Range ft 650 ft Battery Life - 6 months 1 year Battery Type Lithium 3.6V, Size AA 2.0 W x 4.3 L x 1.2 H ABS Plastic

14 Wireless Non-Directional People Counter Versatile yet simple, the SenSource PC-TB12 counter is battery-powered and features a built-in LCD display. A non-directional counter, the PC-TB12-R is both front and side-firing to accomodate a variety of entry styles. The two-part break-beam system covers openings up to 25 feet wide. Easy data collection is available by using either the LCD display or built-in data logger. A USB Software Utility is included to export data in a Microsoft Excel document. PC-TB12-R, Gray PC-TB12-RB, Black Battery-powered sensor installs in minutes 6-digit LCD display indicates counter value, battery life and set-up parameters Built-in data logger stores up to 3,000 records or approximately 33 days at 15 minute increments Power save mode protects battery life Integrated brackets for easy yet sturdy mounting Durable enclosure for high traffic areas Front-firing (opposing wall mount) or Side-firing (doorframe mount) USB port for configuration and data extraction PARAMETER MIN TYP MAX IR Sensor Range 1ft - 25 ft Battery Life - 6 months 1 year Battery Type Lithium 3.6V, Size AA 2.0 W x 4.3 L x 1.2 H ABS Plastic

15 Passive IR with Chime People & Vehicle Counter Using a weatherized battery-powered sensor, the PC-PIR15-D functions indoors or outdoors for both people and vehicle counting. The transmitter sensor unit can be Passive IR counter with chime & installed anywhere, without any wiring and can be mounted directly above or at an LCD, PC-PIR15-D angle over the lane or entryway. The PC-PIR15-D system includes a transmitter sensor unit, a receiver with chime and a counter LCD display. The receiver chime unit and LCD display are powered by an included AC adapter. The chime s volume settings are low, medium, high and off. A programmable delay allows for a group of visitors to be counting as a single unit or to count trailers as part of the same vehicle. Specially designed sensor mounts easily anywhere (no reflector to align) Receiver with integrated chime, the LCD display can mount on a wall or rest on a counter Weather-resistant sensor for indoor or outdoor use Two detection patterns: 50 ft (long range) or 17ft (fan pattern), adjusts easily Low--battery indication tone and LED flash alerts to replace batteries before power failure Flexible mounting options Operating temperature F PARAMETER IR Sensor Range (17ft max in fan pattern - 50ft max in long range) Detection Area Mounted 14 ft above ground in fan pattern Radio Transmission Range Supply Voltage Battery Life Battery Type MIN TYP MAX 10 ft - 50 ft x ,000 (LOS) 9 Volts DC 2 years 4 years 9V Battery Sensor = 3.5 L x 4.2 W x 4.5 D / Display = 3.3 L x 3.3 W x 1.25 D / Chime = 5.5 L x 3.2 W x 1.1 D

16 Passive IR with Chime People & Vehicle Counter Using a weatherized battery-powered sensor, the PC-PIR15-D functions indoors or outdoors for both people and vehicle counting. The transmitter sensor unit can be Passive IR counter with chime & installed anywhere, without any wiring and can be mounted directly above or at an LCD, PC-PIR15-D angle over the lane or entryway. The PC-PIR15-D system includes a transmitter sensor unit, a receiver with chime and a counter LCD display. The receiver chime unit and LCD display are powered by an included AC adapter. The chime s volume settings are low, medium, high and off. A programmable delay allows for a group of visitors to be counting as a single unit or to count trailers as part of the same vehicle. Specially designed sensor mounts easily anywhere (no reflector to align) Receiver with integrated chime, the LCD display can mount on a wall or rest on a counter Weather-resistant sensor for indoor or outdoor use Two detection patterns: 50 ft (long range) or 17ft (fan pattern), adjusts easily Low--battery indication tone and LED flash alerts to replace batteries before power failure Flexible mounting options Operating temperature F PARAMETER IR Sensor Range (17ft max in fan pattern - 50ft max in long range) Detection Area Mounted 14 ft above ground in fan pattern Radio Transmission Range Supply Voltage Battery Life Battery Type MIN TYP MAX 10 ft - 50 ft x ,000 (LOS) 9 Volts DC 2 years 4 years 9V Battery Sensor = 3.5 L x 4.2 W x 4.5 D / Display = 3.3 L x 3.3 W x 1.25 D / Chime = 5.5 L x 3.2 W x 1.1 D

17 Hosted Data & Reporting With Wi-Fi People Counter SenSource s Hosted Wi-Fi sensors send your foot traffic counts to you quickly, easily and without any additional hardware. There is no software to install and no server requirements. The PC-TB12N-WR features a built-in Wi-Fi transmitter that communicates to your existing Wi-Fi network. After installation, all of your traffic reports are available using xtrend web-based platform. The battery-powered counter installs in minutes. A non-directional counter, the PC-TB12N-WR is both front and side-firing to accomodate a variety of entry styles. The two-part break-beam system covers openings up to 25 feet wide. Hosted PC-TB12N-WR, Gray Hosted PC-TB12N-WRB, Black xtrend Platform Reporting Using xtrend web-based platform, traffic data and reports are available on demand. This easy to use platform also sends automated reports and can extract data to a spreadsheet. Report options include: Total Traffic Counts by Hour for the Day Total Traffic Counts by Day for the Week Traffic Counts by Week for the Month Secure Server Data Center owned by SenSource Battery-powered sensor installs in minutes Easily configure sensor settings through USB Mounting options: Front-firing (opposing wall mount) or Side-firing (doorframe mount)

18 Hosted Data & Reporting With Wi-Fi People Counter REQUIREMENTS Wireless network: b or g Wireless access point: No further than 100 ft from sensors Wireless authentication type: WEP-128, WPA-PSK, WPA2-PSK or unsecured Customer IT personnel or third party IT personnel is needed to make changes to customer s router, firewall or switches to allow bi-directional communication during initial system setup. Hosted PC-TB12N-WR, Gray Hosted PC-TB12N-WRB, Black xtrend Platform PARAMETER MIN TYP MAX IR Sensor Range 1ft - 25 ft Battery Life - 6 months* 1 year* Battery Type (4) Lithium 3.6V, Size AA 2.0 W x 4.3 L x 1.2 H ABS Plastic *Wi-Fi network settings affect battery life Built in Wi-Fi transmitter communicates to your existing Wi-Fi network Two-part break-beam covers openings up to 25 feet wide