TRINIDAD AND TOBAGO BUREAU OF STANDARDS
|
|
- Jonas Harrell
- 5 years ago
- Views:
Transcription
1 TRINIDAD AND TOBAGO BUREAU OF STANDARDS STANDARDS WORK PROGRAMME OCTOBER 2016 MARCH 2017 (STATUS AS OF OCTOBER 2016) Date: TRINIDAD AND TOBAGO BUREAU OF STANDARDS Location: 1-2 Century Drive Trincity Industrial Estate Macoya, TUNAPUNA Postal Address: PO Box 467, PORT OF SPAIN Telephone: (868) , 4481/2, Telefax: (868) Address: Website:
2 CONTENTS INTRODUCTION.. 3 WORK PROGRAMME. 4 ANNEX A
3 INTRODUCTION The Trinidad and Tobago Bureau of Standards (the Bureau) is a body corporate established under the authority of the Standards Act No. 18 of 1997 (herein after referred to as the Standards Act). In accordance with the Standards Act, the Bureau shall promote and encourage the development and maintenance of standards and further shall establish standards for the following: to improve goods produced or used in Trinidad and Tobago; to ensure industrial efficiency and development; to promote public and industrial welfare, health and safety; and to protect the environment. This publication contains a list of standards, which was formulated in the period October 2016 to March 2017, and the current status of these draft standards. The Bureau develops standards through consultation with relevant interest groups, and public comment is invited on all draft standards before they are declared as Trinidad and Tobago Standards in accordance with the provisions of the Standards Act. The Bureau is the legal custodian of Trinidad and Tobago Standard Marks, which are issued in accordance with the Standards Act. When a Trinidad and Tobago Standard Mark appears on any product, or in connection with any service, process or practice, it provides assurance that such a product, service, process or practice conforms to a Trinidad and Tobago Standard. The Bureau s Standards Information Centre maintains a reference library of standards, including local, regional and international standards. The Centre serves as the WTO/TBT Enquiry Point which disseminates information on standards and technical regulations as it relates to the World Trade Organization and Technical Barriers to Trade Agreement. It also acts as the sales agent for the publications of foreign and international standards organizations. 3
4 WORK PROGRAMME OCTOBER 2016 MARCH 2017 NOTE 1 The Stage Code (Col 4) gives the current in accordance with the International Harmonized Stage Code (see Annex A) NO. TITLE OF STANDARD STATUS INTERNATIONAL HARMONIZED STAGE CODE 1 ICS CLASSIFICATION 1. Specification for pre-painted roofing sheets Compulsory Specification for bleach Voluntary Requirements for good manufacturing Voluntary practice Requirements for tour guides Voluntary Requirements for advertising Part 1: Voluntary General requirements 6. Specification for polyethylene garbage bag Voluntary High density 7. Specification for Compressed Natural Gas (CNG) Vehicular Fuel Systems Voluntary Requirements for driveway gates safety Voluntary Sites and attraction General requirements Voluntary INTERNATIONAL BASE DOCUMENT 1. ISO :1982, Reagents for chemical analysis Part 1: General test methods 1. CODEX, CAC/RCP , Rev Recommended International Code of Practice: General Principles of Food Hygiene 2. ISO/TS :2009, Prerequisite programmes on food safety Part 1: Food manufacturing NFPA 52:2013, Vehicular Gaseous Fuel Systems Code 1. BS EN 12453, Industrial, commercial and garage doors and gates Safety in use of power operated doors Requirements 2. ASTM F2200, Standard Specification for Automated Vehicular Gate Construction 3. ASTM F1184, Standard Specification for Industrial and Commercial Horizontal Slide Gates 4
5 10. Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V ((U o/u) - Cables for general applications - Single core non-sheathed cables with thermoplastic PVC insulation 11. Self-ballasted LED lamps for general lighting services with supply voltages > 50 V Performance requirements 12. Grounding and bonding equipment (Copper clad rods) Compulsory BS EN :2011, Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U o/u) - Cables for general applications - Single core nonsheathed cables with thermoplastic PVC insulation Compulsory IEC 62610:2013, Self-ballasted LED lamps for general lighting services with supply voltages > 50 V Performance requirements Voluntary (10 th Ed) UL 467:2013, Grounding and Bonding Equipment will be adopted with national deviations 13. Meter bases - Requirements Voluntary Panelboards - Requirements Voluntary Source: ISO website (12 th Ed) UL 67:2009, Panelboards will be adopted with national deviations 5
6 ANNEX A STAGE SUBSTAGE 90 Decision Subs 00 Registration 20 Start of main action 60 Completion of main action 92 Repeat an earlier phase 93 Repeat current phase 98 Abandon 99 Proceed 00 Preliminary Proposal for new project received Proposal for new project under review Close of review Proposal for new project abandoned Approval to ballot proposal for new project 10 Proposal Proposal for new project registered New project ballot initiated Close of voting Proposal returned to submitter for further definition New project rejected New project approved 20 Research New project registered in the standards work programme Working draft (WD) study initiated End of research period Project deleted WD approved for registration as CD 6
7 ANNEX A (Cont'd.) 30 Committee Committee draft (CD) registered CD study/ Committee meetings initiated End of Committee meetings CD referred back to National Technical Committee Project deleted CD approved for PC 40 Public Comment PC registered PC initiated: 1 month for voluntary standards; and 3 months for compulsory standards Close of PC Comments considered, PC draft referred back to the NTC Comments considered Project deleted PC draft approved as final draft TTS 50 Approval Final draft registered for approval Final draft prepared for approval Final draft sent to Board for approval Final draft referred back to the NTC Project deleted Final draft approved for publication 60 Publication under publication National Standard published 90 Review under periodical review Close of review to be revised National standard confirmed Withdrawal of National Standard proposed by NTC 7
8 ANNEX A (Cont'd.) 95 Withdrawal PC ad for withdrawal of initiated PC for withdrawal closed Decision not to withdraw Withdrawal of 8
DRAFT SAINT LUCIA NATIONAL STANDARD DNS/IEC : 2014
DRAFT SAINT LUCIA NATIONAL STANDARD DNS/IEC 60598-2-20: 2014 LUMINAIRES PART 2 20: PARTICULAR REQUIREMEN TS LIGHTING CHAINS (IEC 60598-2-20: 2014, IDT) Edition 4.0 (Stage 40 Enquiry Stage) July 2016 Copyright
More informationPower Measurements. Technology Consulting
Technology Consulting William H. Hardy, PhD 565 Glen Abbey Blvd Knoxville, TN 37934 Cell: (865) 279-1090 www.powermeasurements.com Bill.Hardy@PowerMeasurements.com ANSI Standards Update June 2012 The Presenter
More informationOIML-CS PD-08 Edition 1
PROCEDURAL DOCUMENT OIML-CS PD-08 Edition 1 Signing the OIML-CS Declaration OIML-CS PD-08 Edition 1 ORGANISATION INTERNATIONALE DE METROLOGIE LEGALE INTERNATIONAL ORGANIZATION OF LEGAL METROLOGY Contents
More informationStandards Designation and Organization Manual
Standards Designation and Organization Manual InfoComm International Standards Program Ver. 2014-1 April 28, 2014 Issued by: Joseph Bocchiaro III, Ph.D., CStd., CTS-D, CTS-I, ISF-C Director of Standards
More informationB C ISO/IEC INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO/IEC 10561 Second edition 1999-05-01 Information technology Office equipment Printing devices Method for measuring throughput Class 1 and Class 2 printers Technologies de l'information
More informationReproduced by Sabinet Online in terms of Government Printer s Copyright Authority No dated 02 February 1998 DEPARTMENT OF TRADE AND INDUSTRY
26 No. 37654 GOVERNMENT GAZETTE, 23 MAY 2014 DEPARTMENT OF TRADE AND INDUSTRY No. R. 379 23 May 2014 NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (Act 5 of 2008) AMENDMENT OF THE COMPULSORY SPECIFICATION
More informationConformity Assessment Schemes and Interoperability Testing (1) Keith Mainwaring ITU Telecommunication Standardization Bureau (TSB) Consultant
Conformity Assessment Schemes and Interoperability Testing (1) Keith Mainwaring ITU Standardization Bureau (TSB) Consultant Moscow, 9-11 november 2011 Contents The benefits of conformity assessment Conformity
More informationInter American Accreditation Cooperation. IAAC, IAF and ILAC Resolutions Applicable to IAAC MLA Peer Evaluations
IAAC, IAF and ILAC Resolutions Applicable to IAAC MLA Peer Evaluations CLASSIFICATION This document is classified as an IAAC Mandatory Document. AUTHORIZATION Issue Nº: 07 Prepared by: MLA Committee and
More informationISO/IEC INTERNATIONAL STANDARD. Information technology Cloud computing Reference architecture
INTERNATIONAL STANDARD ISO/IEC 17789 First edition 2014-10-15 Information technology Cloud computing Reference architecture Technologies de l'information Informatique en nuage Architecture de référence
More informationGUIDE 75. Strategic principles for future IEC and ISO standardization in industrial automation. First edition
GUIDE 75 First edition 2006-11 Strategic principles for future IEC and ISO standardization in industrial automation Reference number ISO/IEC GUIDE 75:2006(E) GUIDE 75 First edition 2006-11 Strategic principles
More informationISO INTERNATIONAL STANDARD. Graphical symbols for diagrams Part 8: Valves and dampers
INTERNATIONAL STANDARD ISO 14617-8 First edition 2002-09-01 Corrected version 2003-12-01 Graphical symbols for diagrams Part 8: Valves and dampers Symboles graphiques pour schémas Partie 8: Appareils de
More information#353. Gate Operators and the ANSI/UL 325 Standard. Introduction
Gate Operators and the ANSI/UL 325 Standard Introduction UL 325 is a standard for safety that addresses the automatic operation of garage doors, vehicular gates, louvers, and windows. In this Technical
More informationISO/IEC INTERNATIONAL STANDARD. Information technology Cloud computing Overview and vocabulary
INTERNATIONAL STANDARD ISO/IEC 17788 First edition 2014-10-15 Information technology Cloud computing Overview and vocabulary Technologies de l'information Informatique en nuage Vue d'ensemble et vocabulaire
More informationUnofficial English translation offered by EuropElectro, for reference only
No.: CNCA-C10-01: 2014 Implementation Rules for Compulsory Certification of Lighting Electrical Appliances Announced on Jul. 16, 2014 Implemented on Sep. 1, 2014 Certification and Accreditation Administration
More informationOperational Equipment Power and Environment Standard
Operational Equipment Power and Environment Standard Contents 1 Scope -3 2 Invitation to Tender Response -3 3 Generic Requirements for Equipment Environment -3 3.1 Environmental Conditions -3 3.2 Specific
More informationThis is a preview - click here to buy the full publication TECHNICAL REPORT
TECHNICAL REPORT ISO/IEC TR 14763-2 First edition 2000-07 Information technology Implementation and operation of customer premises cabling Part 2: Planning and installation ISO/IEC 2000 All rights reserved.
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62056-61 First edition 2002-02 Electricity metering Data exchange for meter reading, tariff and load control Part 61: Object identification system (OBIS) Reference number IEC
More informationAdministrative Guideline. SMPTE Metadata Registers Maintenance and Publication SMPTE AG 18:2017. Table of Contents
SMPTE AG 18:2017 Administrative Guideline SMPTE Metadata Registers Maintenance and Publication Page 1 of 20 pages Table of Contents 1 Scope 3 2 Conformance Notation 3 3 Normative References 3 4 Definitions
More informationCGI Deliverables Approval and Maintenance Process
CGI Management CGI Deliverables Approval and Maintenance Process Approved 02 September 2011 1. Introduction The following describes the official approval and maintenance process for the Common Global Implementation
More informationB C ISO/IEC 9595 INTERNATIONAL STANDARD. Information technology Open Systems Interconnection Common management information service
INTERNATIONAL STANDARD ISO/IEC 9595 Third edition 1998-10-15 Information technology Open Systems Interconnection Common management information service Technologies de l'information Interconnexion de systèmes
More informationISO INTERNATIONAL STANDARD. Ergonomic design of control centres Part 2: Principles for the arrangement of control suites
INTERNATIONAL STANDARD ISO 11064-2 First edition 2000-12-15 Ergonomic design of control centres Part 2: Principles for the arrangement of control suites Conception ergonomique des centres de commande Partie
More informationISO/IEC JTC 1/SC 35 N 1664
ISO/IEC JTC 1/SC 35 N 1664 DATE: 2011-03-29 ISO/IEC JTC 1/SC 35 User Interfaces Secretariat: AFNOR DOC TYPE: TITLE: SOURCE: PROJECT: STATUS: WD Information technology User interfaces Principal voice commands
More informationACCAB. Accreditation Commission For Conformity Assessment Bodies
ACCAB Accreditation Commission For Conformity Assessment Bodies ACCAB Platinum Plus Accreditation For Certification Bodies, Inspection Bodies, Testing & Calibration Laboratories and Medical Laboratories
More informationAPPLICATION FOR ACCREDITATION OF CERTIFICATION BODIES
For office use: ENAO Acc. No Date of application First Accreditation Renewal of Accreditation 1.THIS FORM SHOULD BE COMPLETED IN FULL AND RETURNED TO : Ethiopian National Accreditation Office Attention:
More informationISO/IEC INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO/IEC 16388 First edition 1999-10-15 Information technology Automatic identification and data capture techniques Bar code symbology specifications Code 39 Technologies de l'information
More informationPRODUCT CERTIFICATION SCHEME FOR CHILDREN TOYS
Ref No: RACS/PCS/22 Page 1 of 8 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Children Toys
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61360-5 First edition 2004-04 Standard data element types with associated classification scheme for electric components Part 5: Extensions to the EXPRESS dictionary schema IEC
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15024 First edition 2001-12-01 Fibre-reinforced plastic composites Determination of mode I interlaminar fracture toughness, G IC, for unidirectionally reinforced materials Composites
More informationSPECIFIC PROVISIONS FOR THE ACCREDITATION OF CERTIFICATION BODIES IN THE FIELD OF FOOD SAFETY MANAGEMENT SYSTEMS
BELAC 2-405-FSMS Rev 1-2017 SPECIFIC PROVISIONS FOR THE ACCREDITATION OF CERTIFICATION BODIES IN THE FIELD OF FOOD SAFETY MANAGEMENT SYSTEMS The only valid versions of the documents of the BELAC management
More informationISO INTERNATIONAL STANDARD. Laboratory glassware Bottles Part 2: Conical neck bottles
INTERNATIONAL STANDARD ISO 4796-2 First edition 2000-04-01 Laboratory glassware Bottles Part 2: Conical neck bottles Verrerie de laboratoire Flacons Partie 2: Flacons à col conique Reference number ISO
More informationThe U.S. Government s Role in Standards and Conformity Assessment
The U.S. Government s Role in Standards and Conformity Assessment ASTM International-Russian Federation on Technical Regulating and Metrology Coordinated Program Mary Saunders Chief, Standards Services
More informationPRODUCT CERTIFICATION SCHEME FOR ENERGY DRINKS
Ref No: RACS/PCS/11 Page 1 of 6 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Energy Drinks
More informationMANAGEMENT SYSTEM CERTIFICATION BODY PT. INTERNATIONAL CERTIFICATION SERVICES QUALITY MANUAL RULES FOR USE OF LOGOS AND CERTIFICATION MARKS
Page 1 / 10 1. Scope 1.1 These guidelines contain provisions for using the International Certification Services (ICS) Logo, hereinafter referred to ICS logo to be used by companies / institutions / agencies
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO/IEC 15018 First edition 2004-06 Information technology Generic cabling for homes ISO/IEC 2004 All rights reserved. Unless otherwise specified, no part of this publication may
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13584-26 First edition 2000-02-01 Industrial automation systems and integration Parts library Part 26: Logical resource: Information supplier identification Systèmes d'automatisation
More informationCENELEC NWIs (New Work Items) and EWIs (European Work Items)
Administrative Circular 2005-08-19 TO ALL NATIONAL COMMITTEES TO TECHNICAL COMMITTEE AND SUB-COMMITTEE OFFICERS Dear Sir/Madam, NWIs (New Work Items) and EWIs (European Work Items) The objective of this
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60872-2 First edition 1999-01 Maritime navigation and radiocommunication equipment and systems Radar plotting aids Part 2: Automatic tracking aids (ATA) IEC 1999 Copyright -
More informationISO INTERNATIONAL STANDARD. Compressed air Part 3: Test methods for measurement of humidity
INTERNATIONAL STANDARD ISO 8573-3 First edition 1999-06-01 Compressed air Part 3: Test methods for measurement of humidity Air comprimé Partie 3: Méthodes d'essai pour mesurer le taux d'humidité A Reference
More informationACCAB. Accreditation Commission For Conformity Assessment Bodies
ACCAB Accreditation Commission For Conformity Assessment Bodies ACCAB Platinum Plus Accreditation For Certification Bodies, Inspection Bodies, Testing & Calibration Laboratories and Medical Laboratories
More informationSOUTH AFRICAN NATIONAL STANDARD
Copying and network storage prohibited. ISBN 0-626-34123-7 SANS 22004:2016 Edition 2 ISO 22004:2014 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Food safety management systems Guidance on the application
More informationS62. International mail processing centres: assignment and use of operator codes. Data definition and encoding standards
S62 International mail processing centres: assignment and use of operator codes Data definition and encoding standards UPU status: 0 Date of adoption at this status: 30 October 2013 Date of approval of
More informationSOUTH AFRICAN NATIONAL STANDARD
ICS 01.070; 23.040.01 ISBN 0-626-14805-7 SOUTH AFRICAN NATIONAL STANDARD Identification colour markings Part 3: Contents of pipelines Published by Standards South Africa 1 dr lategan road groenkloof private
More informationPRODUCT CERTIFICATION SCHEME FOR WATER PRODUCTS
Ref No: RACS/SOP/31 Page 1 of 6 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology(ESMA) to assure that Water
More informationFriedrich Smaxwil CEN President. CEN European Committee for Standardization
Friedrich Smaxwil CEN President CEN European Committee for Standardization www.cen.eu www.cencenelec.eu Friedrich Smaxwil, CEN President 1. Standards & standardization 2. CEN s role in European Standardization
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8655-2 First edition 2002-09-15 Piston-operated volumetric apparatus Part 2: Piston pipettes Appareils volumétriques à piston Partie 2: Pipettes à piston Reference number ISO
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC TS 61850-2 First edition 2003-08 Communication networks and systems in substations Part 2: Glossary IEC 2003 Copyright - all rights reserved No part of this publication may
More informationIntroduction to Conformity Assessment and ISO/CASCO Tool Box
www.aeconformity.com Introduction to Conformity Assessment and ISO/CASCO Tool Box Alex Ezrakhovich Co-convener of APG & AAPG Sydney, Australia 5th International Conference on Quality Management October
More informationOverview of the U.S. Approach to Standards. Jessica Hychalk American National Standards Institute June 29, 2010
Overview of the U.S. Approach to Standards Jessica Hychalk American National Standards Institute June 29, 2010 1 Goal of Global Industry (1:1:1) One Standard: One Test: One Global Acceptance Transparent
More informationISO/IEC INTERNATIONAL STANDARD. Conformity assessment Requirements for bodies certifying products, processes and services
INTERNATIONAL STANDARD ISO/IEC 17065 First edition 2012-09-15 Conformity assessment Requirements for bodies certifying products, processes and services Évaluation de la conformité Exigences pour les organismes
More informationPUBLICLY AVAILABLE SPECIFICATION
IEC/IEEE/PAS 63547 PUBLICLY AVAILABLE SPECIFICATION Edition 1.0 2011-09 Interconnecting distributed resources with electric power systems INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE V ICS 29.240.99
More informationISO/IEC INTERNATIONAL STANDARD. Conformity assessment Supplier's declaration of conformity Part 1: General requirements
INTERNATIONAL STANDARD ISO/IEC 17050-1 First edition 2004-10-01 Conformity assessment Supplier's declaration of conformity Part 1: General requirements Évaluation de la conformité Déclaration de conformité
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO/IEC 29151 First edition 2017-08 Information technology Security techniques Code of practice for personally identifiable information protection Technologies de l'information Techniques
More informationEUROPEAN COMMISSION DIRECTORATE GENERAL FOR INTERPRETATION
EUROPEAN COMMISSION DIRECTORATE GENERAL FOR INTERPRETATION RESOURCES AND SUPPORT DIRECTORATE Management of Technical Infrastructure Brussels, 23 January 2013 M/516 EN Ref. Ares(2013)136537-04/02/2013 REQUEST
More informationScheme Document. For more information or help with your application contact BRE Global on +44 (0) or
Page: Page 1 of 15 1. Introduction This certification scheme has been designed to promote sustainable production of construction products and materials. Responsible sourcing includes organisational management,
More informationEuropean Standardization
European Standardization Contents European standardization system Relations between IEC and CENELEC CENELEC and directives and mandates from the European Union IEC (TC 100) co-operation with CENELEC in
More informationEuropean Standards- preparation, approval and role of CEN. Ashok Ganesh Deputy Director - Standards
European Standards- preparation, approval and role of CEN Deputy Director - Standards 1 European Standarization why?, 2010-10-14 CEN-CENELEC 2010 2 What standards do enhance the safety of products allow
More informationISO 78-2 INTERNATIONAL STANDARD. Chemistry Layouts for standards Part 2: Methods of chemical analysis
INTERNATIONAL STANDARD ISO 78-2 Second edition 1999-03-01 Chemistry Layouts for standards Part 2: Methods of chemical analysis Chimie Plans de normes Partie 2: Méthodes d'analyse chimique A Reference number
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62053-22 First edition 2003-01 Electricity metering equipment (a.c.) Particular requirements Part 22: Static meters for active energy (classes 0,2 S and 0,5 S) This English-language
More informationISO/IEC INTERNATIONAL STANDARD. Information technology Abstract Syntax Notation One (ASN.1): Information object specification
INTERNATIONAL STANDARD ISO/IEC 8824-2 Fifth edition 2015-11-15 Information technology Abstract Syntax Notation One (ASN.1): Information object specification Technologies de l'information Notation de syntaxe
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO/IEC 14776-381 First edition 2000-06 Information technology Small computer system interface (SCSI) Part 381: Optical Memory Card Device Commands (OMC) ISO/IEC 2000 All rights
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62056-21 First edition 2002-05 Electricity metering Data exchange for meter reading, tariff and load control Part 21: Direct local data exchange This English-language version
More informationIEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System)
IECEE 02 Edition 16.0 2016-06-01 IECEE PUBLICATION IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) Rules of Procedure CB Scheme Scheme of the IECEE
More informationISO/IEC INTERNATIONAL STANDARD
INTERNATIONAL STANDARD This is a preview - click here to buy the full publication ISO/IEC 27017 First edition 2015-12-15 Information technology Security techniques Code of practice for information security
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 6577 Second edition 2002-11-15 Nutmeg, whole or broken, and mace, whole or in pieces (Myristica fragrans Houtt.) Specification Muscade entière ou brisée et macis entier ou en
More informationISO/IEC TS Conformity assessment Guidelines for determining the duration of management system certification audits
TECHNICAL SPECIFICATION ISO/IEC TS 17023 First edition 2013-08-01 Conformity assessment Guidelines for determining the duration of management system certification audits Évaluation de la conformité Lignes
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15534-1 First edition 2000-02-15 Ergonomic design for the safety of machinery Part 1: Principles for determining the dimensions required for openings for whole-body access into
More informationOIML-CS PD-05 Edition 2
PROCEDURAL DOCUMENT OIML-CS PD-05 Edition 2 Processing an application for an OIML Type Evaluation Report and OIML Certificate OIML-CS PD-05 Edition 2 ORGANISATION INTERNATIONALE DE MÉTROLOGIE LÉGALE INTERNATIONAL
More informationRules for LNE Certification of Management Systems
Rules for LNE Certification of Management Systems Application date: March 10 th, 2017 Rev. 040716 RULES FOR LNE CERTIFICATION OF MANAGEMENT SYSTEMS CONTENTS 1. PURPOSE... 3 2. SCOPE... 3 3. DEFINITION
More informationInternational Legal Metrology Update for the 2015 NCWM Annual Meeting in Philadelphia
International Legal Metrology Update for the 2015 NCWM Annual Meeting in Philadelphia Ralph Richter, P.E. International Legal Metrology Program NIST Office of Weights and Measures Load Cells OIML TC9:
More informationISO INTERNATIONAL STANDARD. Water quality Digestion for the determination of selected elements in water Part 2: Nitric acid digestion
INTERNATIONAL STANDARD ISO 15587-2 First edition 2002-03-01 Water quality Digestion for the determination of selected elements in water Part 2: Nitric acid digestion Qualité de l'eau Digestion pour la
More informationInformation technology Security techniques Telebiometric authentication framework using biometric hardware security module
INTERNATIONAL STANDARD ISO/IEC 17922 First edition 2017-09 Information technology Security techniques Telebiometric authentication framework using biometric hardware security module Technologies de l information
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62056-47 First edition 2006-11 Electricity metering Data exchange for meter reading, tariff and load control Part 47: COSEM transport layers for IPv4 networks IEC 2006 Copyright
More informationOVERVIEW OF STANDARDS DEV & INT L TRADE. C. Gachahi Director Standards Development
OVERVIEW OF STANDARDS DEV & INT L TRADE C. Gachahi Director Standards Development KEBS- Establishment and manadate 1) Established on July 1974 under the Standards Act CAP 496 2) To promote standardization
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO/ASTM 51707 Third edition 2015-03-15 Guide for estimation of measurement uncertainty in dosimetry for radiation processing Guide pour l estimation de l incertitude de mesure en
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61508-6 First edition 2000-04 Functional safety of electrical/electronic/ programmable electronic safety-related systems Part 6: Guidelines on the application of IEC 61508-2
More informationISO/IEC INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO/IEC 16390 First edition 1999-10-15 Information technology Automatic identification and data capture techniques Bar code symbology specifications Interleaved 2 of 5 Technologies
More informationISO/IEC INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO/IEC 15945 First edition 2002-02-01 Information technology Security techniques Specification of TTP services to support the application of digital signatures Technologies de l'information
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15188 First edition 2001-07-15 Project management guidelines for terminology standardization Lignes directrices pour la gestion de projets de normalisation terminologique Reference
More informationAccreditation of Product Certification Scheme for Construction Materials By Ir C K Cheung Hong Kong Accreditation Service
Accreditation of Product Certification Scheme for Construction Materials By Ir C K Cheung Hong Kong Accreditation Service 1. Overview of HKAS Originated as an accreditation scheme called HOKLAS in 1985
More informationISO INTERNATIONAL STANDARD. Ergonomic requirements for office work with visual display terminals (VDTs) Part 4: Keyboard requirements
INTERNATIONAL STANDARD ISO 9241-4 First edition 1998-08-01 Ergonomic requirements for office work with visual display terminals (VDTs) Part 4: Keyboard requirements Exigences ergonomiques pour travail
More informationITU Asia-Pacific Centres of Excellence Training on Conformity and Interoperability. Session 2: Conformity Assessment Principles
ITU Asia-Pacific Centres of Excellence Training on Conformity and Interoperability Session 2: Conformity Assessment Principles 12-16 October 2015 Beijing, China Keith Mainwaring ITU Expert Agenda 1. Context
More informationCirculated to P- and O-members, and to technical committees and organizations in liaison for voting (P-members only) by:
Committee Draft ISO/IEC CD 24706 Date: 2006-05-01 Reference number: ISO/JTC 1/SC 32N1469 Supersedes document SC 32N1257 THIS DOCUMENT IS STILL UNDER STUDY AND SUBJECT TO CHANGE. IT SHOULD NOT BE USED FOR
More informationISO/IEC INTERNATIONAL STANDARD. Identification cards Recording technique Part 6: Magnetic stripe High coercivity
INTERNATIONAL STANDARD ISO/IEC 7811-6 Second edition 2001-02-01 Identification cards Recording technique Part 6: Magnetic stripe High coercivity Cartes d'identification Technique d'enregistrement Partie
More informationISO 7251 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 7251 Third edition 2005-02-01 Microbiology of food and animal feeding stuffs Horizontal method for the detection and enumeration of presumptive Escherichia coli Most probable
More informationHEALTH INFORMATION INFRASTRUCTURE PROJECT: PROGRESS REPORT
HEALTH INFORMATION INFRASTRUCTURE PROJECT: PROGRESS REPORT HCQI Expert Group Meeting 17 May 2013 Jillian.Oderkirk@oecd.org Agenda to improve health information infrastructure» In 2010, health ministers
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30107-1 Edition 2 ISO 4832:2006 Edition 3 SOUTH AFRICAN NATIONAL STANDARD Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of coliforms Colony-count technique
More informationGuidelines for Eco Mark Program Implementation
Guidelines for Eco Mark Program Implementation April 2011 Japan Environment Association [Objectives of the guidelines] For transparent and fair administration of the program, these guidelines, etc., shall
More informationMODEL CERTIFICATE FOR FISH AND FISHERY PRODUCTS CAC/GL
CAC/GL 48-2004 Page 1 of 6 INTRODUCTION MODEL CERTIFICATE FOR FISH AND FISHERY PRODUCTS CAC/GL 48-2004 Certification is one method that can be utilized by regulatory agencies of importing and exporting
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD IEC 61683 First edition 1999-11 Photovoltaic systems Power conditioners Procedure for measuring efficiency Systèmes photovoltaïques Conditionneurs de puissance Procédure de mesure
More informationCEN and CENELEC Position Paper on the draft regulation ''Cybersecurity Act''
CEN Identification number in the EC register: 63623305522-13 CENELEC Identification number in the EC register: 58258552517-56 CEN and CENELEC Position Paper on the draft regulation ''Cybersecurity Act''
More informationPUBLICLY AVAILABLE SPECIFICATION. Pre-Standard. Connectors for electronic equipment
PUBLICLY AVAILABLE SPECIFICATION Pre-Standard IEC PAS 61076-3-114 First edition 2005-11 Connectors for electronic equipment Part 3-114: Rectangular connectors Protective housings for use with 8-way shielded
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60872-1 First edition 1998-09 Maritime navigation and radiocommunication equipment and systems Radar plotting aids Part 1: Automatic radar plotting aids (ARPA) Matériels et systèmes
More informationISO/IEC INTERNATIONAL STANDARD
INTERNATIONAL STANDARD This is a preview - click here to buy the full publication ISO/IEC 10918-6 First edition 2013-04-15 Information technology Digital compression and coding of continuoustone still
More informationNational Certificate in Hand Operated Fire Fighting Equipment (Level 3) Level 3
NZQF NQ Ref 0568 Version 4 Page 1 of 9 National Certificate in Hand Operated Fire Fighting Equipment (Level 3) Level 3 Credits 124 This qualification has been reviewed. The last date to meet the requirements
More informationISO/IEC INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO/IEC 10918-5 First edition 2013-05-01 Information technology Digital compression and coding of continuoustone still images: JPEG File Interchange Format (JFIF) Technologies de
More informationAmerican National Standard for Electric Lamps Light-Emitting Diode Package Specification Sheet for General Illumination Applications
American National Standard for Electric Lamps Light-Emitting Diode Package Specification Sheet for General Illumination Applications Secretariat: National Electrical Manufacturers Association Approved
More informationMutual Recognition Agreement/Arrangement: General Introduction, Framework and Benefits
Workshop for Caribbean countries to promote the development and implementation of Conformity Assessment programmes St. Augustine (Trinidad and Tobago) 2-4 December 2014 Mutual Recognition Agreement/Arrangement:
More informationISO 3901 INTERNATIONAL STANDARD. Information and documentation International Standard Recording Code (ISRC)
INTERNATIONAL STANDARD ISO 3901 Second edition 2001-10-01 Information and documentation International Standard Recording Code (ISRC) Information et documentation Code international normalisé des enregistrements
More informationISO/IEC INTERNATIONAL STANDARD. Information technology EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance
INTERNATIONAL STANDARD ISO/IEC 15418 First edition 1999-12-01 Information technology EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance Technologies de l'information Identificateurs
More informationISO 2253 INTERNATIONAL STANDARD. Curry powder Specification. Poudre de curry Spécifications. Third edition
INTERNATIONAL STANDARD ISO 2253 Third edition 1999-12-15 Curry powder Specification Poudre de curry Spécifications Reference number ISO 2253:1999(E) ISO 1999 PDF disclaimer This PDF file may contain embedded
More information