Time-Series Data in MongoDB on a Budget. Peter Schwaller Senior Director Server Engineering, Percona Santa Clara, California April 23th 25th, 2018

Transcription

1 Time-Series Data in MongoDB on a Budget Peter Schwaller Senior Director Server Engineering, Percona Santa Clara, California April 23th 25th, 2018

2 TIME SERIES DATA in MongoDB on a Budget Click to add text

3 What is Time-Series Data? Characteristics: Arriving data is stored as a new value as opposed to overwriting existing values Usually arrives in time order Accumulated data size grows over time Time is the primary means of organizing/accessing the data 3

4 Time Series Data in MONGODB on a Budget Click to add text

5 Why MongoDB? General purpose database Specialized Time-Series DBs do exist Do not use mmap storage engine 5

6 Data Retention Options Purge old entries Set up MongoDB index with TTL option (be careful if this index is your shard key) Aggregate data and store summaries Create summary document, delete original raw data Huge compression possible (seconds->minutes->hours->days->months->years) Measurement buckets Store all entries for a time window in a single document Avoids storing duplicate metadata Individual Documents for Each Measurement Useful when data is sparse or intermittent (e.g., events rather than sensors) 6

7 Potential Problems with Data Collection Duplicate entries Utilize unique index in MongoDB to reject duplicate entries Delayed Out of order 7

8 Problems with Delayed and Out-of-Order Entries Alert/Event generation Incremental Backup 8

9 Enable Streaming of Data Add recordedtime field (in addition to existing field with timestamp) Utilize $currentdate feature of db.collection.update() $currentdate: { recordedtime: true } You cannot use this field as a shard key! Requires use of update instead of insert Which in turn requires specification of _id field Consider constructing your _id to solve the duplicate entries issue at the same time Allows applications to reliably process each document once and only once. 9

10 Accessing Your Data It s only *mostly* write-only.

11 Create Appropriate Indexes Avoid collection scans! Consider using: db.admincommand( { setparameter: 1, notablescan: 1 } ) Avoid queries that might as well be collection scans Create the indexes you need (but no more) Don t depend on index intersection Don t over index Each index can take up a lot of disk/memory Consider using partial indexes { partialfilterexpression: { speed: { $gt: 75.0 } } } 11

12 Check Your Indexes Use.explain() liberally Check which indexes are actually used: db.collection.aggregate( [ { $indexstats: {}}]) 12

13 Adding Data Getting the Speed You Need

14 API Methods Insert array database[collection].insert(doc_array) Insert unordered bulk bulk = database[collection].initialize_unordered_bulk_op() bulk.insert(doc) # loop here bulk.execute() Upsert unordered bulk bulk = database[collection].initialize_unordered_bulk_op() bulk.find({"_id": doc["_id"]}).upsert().update_one({"$set": doc}) # loop here bulk.execute() Insert single database[collection].insert(doc) Upsert single database[collection].update_one({"_id": doc["_id"]}, {"$set": doc}, upsert=true) 14

15 Relative Performance Comparison of API Methods Insert Array Insert Unordered Bulk Update Unordered Bulk Insert Single Update Single Docs/Sec 15

16 Benchmarks and other lies. Answering, Why can t I just use a gigantic HDD RAID array?

17 Benchmark Environment VMs 4 core Intel(R) Xeon(R) CPU E GHz 8 GB RAM Sandisk Ultra II 960GB SSD WD 5TB 7200rpm HDD MongoDB WiredTiger 4GB Cache Snappy collection compression Standalone server (no replica set, no mongos) Data 178 bytes per document in 6 fields 3 indexes (2 compound) Disk usage: 40% storage, 60% indexes Using update unordered bulk method, 1000 docs per bulk.execute() 17

18 Benchmark SSD vs. HDD Inserts/Sec SSD HDD 18

19 SSD Benchmark 60 Minutes 19

20 SSD Benchmark 0:30-1:00 20

21 HDD Benchmark 0:30-1:30 21

22 HDD Benchmark 0:30-8:45 (42M documents) 22

23 HDD Benchmark Last Hour 23

24 SSD Benchmark 0:30-2:10 (42M documents) 24

25 Benchmark SSD vs. HDD Last Hour Inserts/Sec SSD HDD 25

26 96 Hour Test 26

27 TL;DR Don t trust someone else s benchmarks (especially mine!) Benchmark using your own schema and indexes Artificially accelerate index size exceeding available memory 27

28 Time Series Data in MongoDB on a BUDGET

29 Replica Set Rollout Options Follow standard advice 3 server replica sets (Primary, Secondary, Secondary) Every replica set server on its own hardware Disk mirroring Cost cutting options Primary, Secondary, Arbiter Locate multiple replica set servers on the same hardware (but NOT from the SAME replica set) No disk mirroring (how many copies do you really need?) I love downtime and don t care about my data Single instance servers instead of replica sets RAID0 ( no wasted disk space! ) No backups 29

30 Storing Lots of Data Sharding is a method for distributing data across multiple machines. MongoDB uses sharding to support deployments with very large data sets and high throughput operations.

31 Conventional Sharding Non-sharded data kept in default replica set Shard key hashed on timestamp to evenly distribute data Pros: Increases insert rate Arbitrarily large data storage Cons: All shard replica sets should have comparable hardware All shards start thrashing at the same time Expanding means a LOT of rebalancing 31

32 Data Access Patterns New writes are always very recent Reads are almost always of recent data Reads of old data are intuitively slower let s take advantage of that. 32

33 Sharding by Zone Non-sharded data kept in default replica set Most recent time-series data stored in fast replica set Older time-series data stored in slow replica sets Pros: Pay for speed where we need it Swap fast to slow before thrashing kills performance Infinite data size Cons: Ceiling on insert speed 33

34 Prerequisites for Zone Sharding Sharded cluster configured (config replica set, mongos, etc) Existing replica set rsmain (primary shard) contains your normal (not timeseries) data TimeSeries collection with an index on time New replica set for time-series data (e.g., rs001) added as a shard 34

35 Initial Zone Ranges Run on mongos: use admin sh.enablesharding( DBName ) sh.shardcollection( DBName.TimeSeries, { time : 1 } ) sh.addshardtag('rsmain', future') sh.addshardtag( rs001', ts001') sh.addtagrange('dbname.timeseries',{time: new Date(" ")}, {time:maxkey},'future') sh.addtagrange( DBName.TimeSeries',{time:MinKey},{time:new Date(" ")}, ts001') # sh.splitat('dbname.timeseries', {"time" : new Date(" ")}) 35

36 Adding a New Time-Series Replica Set Step 1 Create new Replica Set When? Well before you run out of available fast storage Before your input capacity is lowered too close to your needs Where? On the same server with fast storage as the current time-series replica set Run on mongos: use admin db.runcommand({addshard: rs002/hostname:port", name: "rs002"}) sh.addshardtag( rs002, ts002') var configdb=db.getsiblingdb("config"); configdb.tags.update({tag: ts001"},{$set:{'max.time': new ISODate( ) }}) sh.addtagrange( DBName.TimeSeries',{time:new Date(" ")},{time:new Date(" ")}, ts002') # sh.splitat('dbname.timeseries', {"time" : new ISODate(" ")}) 36

37 Adding a New Time-Series Replica Set Step 2 Wait before Relocation Initially nothing changes all data is added into previous replica set Eventually, new entries match the min.time of the new replica set and will be stored there How long to wait before relocation? Make sure you don t fill up your fast storage How far back in time do normal queries go? - Queries to previous replica set will get slower after relocation 37

38 Adding a New Time-Series Replica Set Step 3 Relocate to Slow Storage Follow standard procedure for moving replica set Multiple server instances can share same server/storage Use unique ports Set wiredtigercachesizegb appropriately 38

39 Pause for Questions

40 Wrap Up 1. Determine your anticipated time-series data rate 2. Mock up a benchmark app matching your use-case Focus on indexed fields and their cardinality 3. Benchmark on a single server Fast storage Limited memory to accelerate index thrashing Ensure benchmarks run long enough 4. Iterate adjusting the following tradeoffs: single vs bulk/array upsert vs insert size of bulk/array insert/upsert if using measurement buckets, adjust size of bucket 5. If you achieve your needed data rate, use shard tags to push old data to slower (cheaper) servers 40

41 Rate My Session 41

42 Thank You Sponsors!! 42

43 Thank You!