Infinia* Conformance Statement for DICOM V3.0

Transcription

1 g GE Healthcare Technical Publications Revision 1 Infinia* Conformance Statement for DICOM V3.0 * Refer to Section 1 for a list of products in the Infinia family to which this Conformance Statement applies. g GE Healthcare GE Healthcare: telex P.O. Box 414, Milwaukee, Wisconsin, U.S.A. (Asia, Pacific, Latin America, North America) GE Healthcare - Europe: Telex rue de la Miniere, B.P.34, 78533, Buc Cedex, France

2 COPYRIGHT 2009 BY GE Healthcare Acquisition and/or processing software and the related documentation are confidential and proprietary information of GE Healthcare. Only licensees of GE Healthcare Systems. have a right to use the information contained herein. Only licensees specifically granted copy and/or transfer rights have the right to copy and/or transfer the information. Any unauthorized use, disclosure, assignment, transfer or reproduction of this confidential information will be prosecuted to the full extent of the Law. DISCLAIMER GE Healthcare shall not be liable nor obligated in any manner in respect of bodily injury and/or property damage arising from the use of this software if such use is not in strict compliance with instructions and safety precautions contained in the relevant operating manuals and in all supplements thereto, in all product labels, and according to all terms of warranty and sale of this software, nor if any change not authorized by GE Healthcare is made to the software contained herein. WARNING User provided programs or protocols are NOT validated nor warranted by GE Healthcare. The use of data obtained using such user provided programs or protocols is the sole responsibility of the party using such programs or protocols. Users exchanging files and diskettes should beware of the risk of software viruses.

3 LIST OF REVISIONS REV DATE DESCRIPTION PAGES APPR. 1 Oct Infinia Release All M. Mesh

4 TABLE OF CONTENTS SECTION PAGE SECTION 1 - : Introduction 1.1 Overview Overall DICOM Conformance Statement Document Structure Intended Audience Scope and Field of Application Important remarks References Definitions Symbols and Abbreviations SECTION 2 - : Network Conformance Statement 2.1 Introduction Implementation Model Application Data Flow Diagram Functional Definitions of Application Entities Sequencing of Real-World Activities AE Specifications DICOM Server AE Specification Association Establishment Policies Association Initiation Policy Association Acceptance Policy Communication Profiles Support Communication Stacks (PS 3.8, PS 3.9) OSI Stack TCP/IP Stack API Physical Media Support Point-to-Point Stack Extensions / Specializations / Privatizations Standard Extended/Specialized/Private SOPs Standard Extended SOP Classes Private SOP Class Private Transfer Syntaxes Configuration AE Title/Presentation Address Mapping Configuration Parameters Support of Extended Character Sets Codes and Controlled Terminology Fixed Coded Terminology Mapped Coded Terminology Configurable Coded Terminology Security Profiles SECTION 3 - : Nuclear Medicine (NM) Information Object Implementation 3.1 Introduction NM IOD Implementation

5 TABLE OF CONTENTS (Continued) SECTION PAGE 3.3 NM Entity-Relationship Mode Entity Descriptions Patient Entity Description Study Entity Description Series Entity Description Equipment Entity Description Frame of Reference Entity Description NM Image Entity Description Infinia Mapping of DICOM Entities IOD Module Table Information Module Definitions Common Patient Entity Modules Patient Module Common Study Entity Modules General Study Modules Patient Study Modules Common Series Entity Modules General Series Modules Infinia Private Series Module NM/PET Patient Orientation Module Common Frame of Reference Entity Modules Frame of Reference Modules Common Equipment Entity Modules General Equipment Module Common Image Entity Modules General Image Module Infinia Private Image Module Image Pixel Module Multi-Frame Module General Modules SOP Common Module Nuclear Medicine Modules NM Image Pixel Module NM Multi-Frame Module NM Image Module NM Isotope Module NM Detector Module NM TOMO Acquisition Module Infinia Private TOMO Acquisition Module NM Multi-Gated Acquisition Module Infinia Private Multi-Gated Acquisition Module Infinia Private GSPECT Acquisition Module NM Phase Module NM Reconstruction Module Infinia Private SPECT Reconstruction Module

6 TABLE OF CONTENTS (Continued) SECTION PAGE SECTION 4 - Modality Worklist Query Implementation 4.1 Infinia Mapping of DICOM entities Worklist Query MODULE TABLE Worklist Query Module Definitions SOP Common Module Scheduled Procedure Step Module Requested Procedure Module SECTION 5 - Infinia Storage Commitment Push Model Implementation 5.1 Introduction IOD Module Table Storage Commitment Module for N-action Storage Commitment Module For N-event Report SECTION 6 - Infinia PRIVATE DATA OBJECT IMPLEMENTATION 6.1 Introduction Infinia Private Data IOD Implementation IOD Module Table Information Module Definitions Infinia Private Series Data Object Module SOP Common Module General Mapping Rules for Series Data Objects Export Notes for Series Data Objects SECTION 7 - Performed Procedure Step Conformance Statement 7.1 Introduction IOD MODULE TABLE Modality Performed Procedure Step IOD Module SECTION 8 - : SC Information Object Implementation 8.1 Introduction SC IOD Implementation SC Entity-Relationship Model Entity Descriptions Patient Entity Description Study Entity Description Series Entity Description Equipment Entity Description SC Image Entity Description Infinia Mapping of DICOM Entities IOD Module Table

7 TABLE OF CONTENTS (Continued) SECTION PAGE 8.5 Information Module Definitions Common Patient Entity Modules Patient Module Common Study Entity Modules General Study Module Common Series Entity Modules General Series Module Common Equipment Entity Modules General Equipment Module Common Image Entity Modules General Image Module Infinia SC Private Image Module Image Pixel Module General Modules SOP Common Module SC Image Equipment Module APPENDIX A -Infinia Private Data Dictionary 1 4

8 Note SECTION 1: INTRODUCTION Throughout this document the term "Infinia" refers to the following Infinia products: Infinia Infinia with Hawkeye 4 Infinia VC Infinia VC with Hawkeye 4 This document applies to the following software releases for each product: Infinia V2.105.x Infinia with Hawkeye 4 V2.105.x Infinia VC V2.105.x Infinia VC with Hawkeye 4V2.105.x 1.1 OVERVIEW This DICOM Conformance Statement is divided into Sections and Appendices as described below: Section 1- Introduction, which describes the overall structure, intent, and references for this Conformance Statement Section 2 - Network Conformance Statement, which specifies the GE Healthcare equipment compliance to the DICOM requirements for the implementation of Networking features. Section 3 - Nuclear Medicine Information Object Implementation, which specifies the GE Healthcare equipment compliance to DICOM requirements for the implementation of a Nuclear Medicine Information Object. Section 4 - Modality Worklist Information Model, which specifies the information model used for the implementation of the Modality Worklist Information Model. Section 5- Infinia Storage Commitment PUSH Model Implementation, which is used both for N-ACTION Storage Commitment requests by the SCU and N-EVENT REPORT Storage Commitment notifications by the SCP. Section 6 - Infinia Protocol Data Object Implementation, which specifies the GE Healthcare equipment compliance to DICOM requirements for the implementation of a Private Infinia Protocol Data Object. Section 7 - Infinia Modality Performed Procedure Step SOP Class Definition allows a Modality Performed Procedure Step Message to be communicated to the Hospital/Radiology information system. The PPS feature provides the DICOM Modality Performed Procedure Step service as a service class user (SCU). Section 8 - Secondary Capture Information Object Implementation, which specifies the GE Healthcare equipment compliance to DICOM requirements for the implementation of a Secondary Capture Information Model. Appendix A - Infinia Private Data Dictionary 1-1

9 1.2 OVERALL DICOM CONFORMANCE STATEMENT DOCUMENT STRUCTURE The Documentation Structure of the GE Healthcare Conformance Statements and their relationship with the DICOM V3.0 Conformance Statements is shown in the Illustration

10 ID/Net v3.0 Introduction to the Integrated DICOM/Network v3.0 (ID/Net v3.0) Conformance Statement Direction: APPLICATION ENTITY SPECIFICATION (SERVICE CLASSES, INFORMATION OBJECTS, MESSAGE EXCHANGES, ETC.) Product Implementation: CT Advantage MR Advantage Infinia Conformace Statement Direction: EN Conformance Statement Conformance... Direction: Conformance Statement... Statement Direction: Direction: DICOM STANDARD NEMA (2008) Standard Specification: DICOM V 3.0 DICOM V 3.0 Part 1 DICOM V Part 2 DICOM V 3.0 Part 3DICOM V 3.0 Part 4... DICOM V 3.0 Part 18 Illustration 1-1. Documentation Structure 1-3

11 This document specifies the DICOM v3.0 implementation. It documents the DICOM v3.0 Conformance Statement and Technical Specification required to interoperate with the GE Healthcare network interface. Introductory information, which is applicable to all GE Healthcare Conformance Statements, is described in the document: Introduction to the Integrated DICOM/Network v3.0 (ID/Net v3.0) Conformance Statement Direction: This Introduction familiarizes the reader with DICOM terminology and general concepts. It should be read prior to reading the individual products' GE Healthcare Conformance Statements. The GE Healthcare Conformance Statement, contained in this document, also specifies the Lower Layer communications which it supports (e.g., TCP/IP). However, the Technical Specifications are defined in the DICOM v3.0 Part 8 standard. For more information including Network Architecture and basic DICOM concepts, please refer to the Introduction. For the convenience of software developers, there is "collector" Direction available. By ordering the collector, the Introduction described above and all of the currently published GE Healthcare Product Conformance Statements will be received. The collector Direction is: ID/Net v3.0 Conformance Statements Direction: For more information regarding DICOM v3.0, copies of the Standard may be obtained via the Internet at < Comments to the Standard may be addressed to: DICOM Secretariat NEMA 1300 North 17th Street, Suite 1847 Rosslyn, VA USA Phone: INTENDED AUDIENCE The reader of this document is concerned with software design and/or system integration issues. It is assumed that the reader of this document is familiar with the DICOM v3.0 Standards and with the terminology and concepts which are used in those Standards. If readers are unfamiliar with DICOM v3.0 terminology they should first refer to the document listed below, then read the DICOM v3.0 Standard itself, prior to reading this DICOM Conformance Statement document. Introduction to the Integrated DICOM/Network v3.0 (ID/Net v3.0) Conformance Statement Direction:

12 1.4 SCOPE AND FIELD OF APPLICATION It is the intent of this document, in conjunction with the Introduction to the Integrated DICOM/Network v3.0 (ID/Net v3.0) Conformance Statement, Direction: , to provide an unambiguous specification for GE Healthcare implementations. This specification, called a Conformance Statement, includes a DICOM v3.0 Conformance Statement and is necessary to ensure proper processing and interpretation of GE Healthcare medical data exchanged using DICOM v3.0. The GE Healthcare Conformance Statements are available to the public. The reader of this DICOM Conformance Statement should be aware that different GE Healthcare devices are capable of using different Information Object Definitions. For example, a GE Healthcare CT Scanner may send images using the CT Information Object, MR Information Object, Secondary Capture Object, etc. Included in this DICOM Conformance Statement are the Module Definitions which define all data elements used by this GE Healthcare implementation. If the user encounters unspecified private data elements while parsing a GE Healthcare Data Set, the user is well advised to ignore those data elements (per the DICOM V3.0 standard). Unspecified private data element information is subject to change without notice. If, however, the device is acting as a "full fidelity storage device", it should retain and re-transmit all of the private data elements which are sent by GE Healthcare devices. 1.5 IMPORTANT REMARKS The use of these DICOM Conformance Statements, in conjunction with the DICOM V3.0 Standards, is intended to facilitate communication with GE imaging equipment. However, by itself, it is not sufficient to ensure that inter-operation will be successful. The user (or user's agent) needs to proceed with caution and address at least four issues: Integration - The integration of any device into an overall system of interconnected devices goes beyond the scope of standards (DICOM V3.0), and of this introduction and associated DICOM Conformance Statements when interoperability with non-ge equipment is desired. The responsibility to analyze the applications requirements and to design a solution that integrates GE imaging equipment with non GE systems is the user's responsibility and should not be underestimated. The user is strongly advised to ensure that such an integration analysis is correctly performed. Validation - Testing the complete range of possible interactions between any GE device and non GE devices, before the connection is declared operational, should not be overlooked. Therefore, the user should ensure that any non GE provider accepts full responsibility for all validation required for their connection with GE devices. This includes the accuracy of the image data once it has crossed the interface between the GE imaging equipment and the non GE device and the stability of the image data for the intended applications. Such a validation is required before any clinical use (diagnosis and/or treatment) is performed. It applies when images acquired on GE imaging equipment are processed/displayed on a non-ge device, as well as when images acquired on non-ge equipment is processed/displayed on a GE console or workstation. Future Evolution - GE understands that the DICOM Standard will evolve to meet the user's growing requirements. GE is actively involved in the development of the DICOM V3.0 Standard. DICOM V3.0 will incorporate new features and technologies and GE may follow the evolution of the Standard. The GE Healthcare protocol is based on DICOM V3.0 as specified in each DICOM Conformance Statement. Evolution of the Standard may require changes to devices which have implemented DICOM V3.0. In addition, GE reserves the right to discontinue or make changes to the support of communications features (on its products) reflected on by these ID/Net DICOM Conformance Statements. The user 1-5

13 should ensure that any non GE provider, which connects with GE devices, also plans for the future evolution of the DICOM Standard. Failure to do so will likely result in the loss of function and/or connectivity as the DICOM Standard changes and GE Products are enhanced to support these changes. Interaction - It is the sole responsibility of the non GE provider to ensure that communication with the interfaced equipment does not cause degradation of GE imaging equipment performance and/or function. 1.6 REFERENCES A list of references which is applicable to all GE Healthcare Conformance Statements is included in the Introduction to the Integrated DICOM/Network V3.0 (ID/Net V3.0) Conformance Statement, Direction: The information object implementation refers to DICOM PS 3.3 (Information Object Definition). 1.7 DEFINITIONS A set of definitions which is applicable to all GE Healthcare Conformance Statements is included in the Introduction to the IDICOM/Network V3.0 (ID/Net V3.0) Conformance Statement, Direction: SYMBOLS AND ABBREVIATIONS A list of symbols and abbreviations which is applicable to all GE Healthcare Conformance Statements is included in the Introduction to the Integrated DICOM/Network V3.0 (ID/Net V3.0) Conformance Statement, Direction:

14 SECTION 2: NETWORK CONFORMANCE STATEMENT 2.1 INTRODUCTION This section of the DICOM Conformance Statement specifies the compliance to DICOM conformance requirements for the relevant Networking features on this GE Healthcare product. Infinia systems provide sophisticated acquisition, image processing and storage functions of nuclear image data acquired through the front end acquisition system. In view of the requirements to conform to a global standard that permits interoperability across equipment produced by different vendors, Infinia system will provide support for DICOM 3.0. This section details the roles and DICOM Service Classes supported by the Infinia. The Infinia DICOM implementation allows the user to send Nuclear Medicine image data, acquired through the front-end acquisition system, and Secondary Capture Objects, created as reports of several Quality Control (QC) operations, to another DICOM station. In this situation Infinia provides the DICOM C-STORE service as a service class user (SCU). The Infinia DICOM implementation supports storage commitment for the already transferred data. This guarantees the user that the acquired Nuclear Medicine image data is safely archived for future use. In this situation Infinia provides the DICOM Storage Commitment Service as Service Class User (SCU). The Infinia DICOM implementation supports receiving Worklist information from, and sending Modality Performed Procedure Step information to a remote AE. Receiving Worklist information is associated with the real world activity: Modality Worklist Query. When a query is performed the remote AE Worklist items matching the query request are received. The Infinia DICOM implementation supports receiving more than one Scheduled procedure step per study instance, enabling the acquisition of their matching number of protocols for this study. Similarly, Infinia supports scheduling locally more than one protocol to be performed for a study. The Infinia DICOM implementation creates and updates Modality Performed Procedure Step (MPPS) instances managed by a remote AE in association with image acquisition. Completion or discontinuation of the MPPS is performed as the result of an operator action. The Infinia DICOM implementation also provides a verification mechanism by which a remote application entity (AE) can verify application-level communication with the Infinia DICOM Server. Also provided is a mechanism by which a Infinia user can verify application-level communication with a remote DICOM AE. In these situations, Infinia provides the DICOM C-ECHO service as both a SCP and SCU, respectively. 2.2 IMPLEMENTATION MODEL All DICOM functionality on the Infinia product is logically provided by the Infinia_SCANNER Server AE. The Infinia_SCANNER Server AE is commanded to perform DICOM services through the use of the Infinia user interface. The Infinia_SCANNER Server AE also listens on a pre-defined port for incoming connections from remote DICOM AEs. 2-1

15 2.2.1 Application Data Flow Diagram The Basic and Specific Application models for this device are shown in Illustration 2-1, below. Association Initiation Image Send SCU Infinia_SCANNER AE Remote Image Storage SCP Modality Worklist SCU Remote Modality Worklist SCP Verify SCP Association Acceptance Remote Verify SCU Verify SCU Remote Verify SCP Remote Image Image Storage Storage Commitment Commitment Push SCU SCP Modality Performed Procedure Step SCU Remote Modality Performed Procedure Step SCP DICOM Standard Interface Illustration 2-1. Basic and Specific Application Models 2-2

16 2.2.2 Functional Definitions of Application Entities The Infinia Infinia_SCANNER Server Application Entity (AE) initiates the following functions: Store: Initiates a DICOM association in order to send images to a remote AE. If the remote AE accepts a presentation context applicable to the image(s) being sent, the Infinia_SCANNER Server will send the images via the C-STORE service. Storage commitment: Initiates a DICOM association in order to request a storage commitment from a remote AE. If the remote AE supports storage commitment the Infinia_SCANNER DICOM server will request a storage commitment for the image(s) previously sent successfully via the N-ACTION-RQ. Verify: Initiates a DICOM association in order to send a verification message to a remote AE via a C-ECHO-RQ message. Modality Work List (MWL): Initiates a DICOM association in order to query the work list from a remote AE. If the remote AE accepts a presentation context applicable to the modality work list request being sent, the Infinia_SCANNER Server will receive appropriate MWL responses via the C-FIND service. Modality Performed Procedure Step (MPPS): Initiates a DICOM association in order to report the progress of the procedure step. When starting the acquisition of the first scan in the protocol, Infinia DICOM implementation creates an MPPS instance and updates this instance whenever a scan's acquisition is completed for this protocol, and when the operator marks this protocol as completed or discontinued. The Infinia Infinia_SCANNER Server AE responds to the following functions: Verify: Responds to incoming C-ECHO-RQ messages by returning a C-ECHO-RSP message with a status of success. Storage Commitment Response: Responds to incoming N-EVENT_REPORT messages arriving from Remote AE with the status of storage commitment for images previously requested by Infinia_SCANNER Server AE Sequencing of Real-World Activities The Infinia Application Entity queries the remote station for the modality Worklist; performs acquisition according to local schedules, or by Worklist procedures; stores images; reports the progress of procedure using MPPS; and then requests Storage Commitment for previously stored images. 2.3 AE SPECIFICATIONS DICOM Server AE Specification This Application Entity provides Standard Conformance to the following DICOM v3.0 SOP Classes as an SCU: SOP Class Name SOP Class UID Nuclear Medicine Image Storage Storage Commitment Push Model SOP Class Secondary Capture Image Storage

17 SOP Class Name SOP Class UID Verification - SOP Class Modality Worklist Information Model - Find Private Class Modality Performed Procedure Step SOP Class This Application Entity provides Standard Conformance to the following DICOM v3.0 SOP Classes as an SCP: SOP Class Name Verification - SOP Class SOP Class UID Association Establishment Policies General The DICOM Application Context Name (ACN), which is always proposed, is: Application Context Name The Maximum Length PDU negotiation is included in all association establishment requests. The maximum length PDU for an association initiated by the Infinia_SCANNER Server is: Maximum Length PDU bytes The SOP Class Extended Negotiation is not supported. The maximum number of Presentation Context Items that will be proposed is 7. Note that the same Abstract Syntax may be offered multiple times with different Transfer Syntaxes. The user information items sent by this product are: PDU Maximum length (PDU maximum length is 28672, and is not configurable) Implementation UID Number of Associations The Infinia_SCANNER AE (SCU) will initiate a single DICOM association to perform a single image store to a remote AE. One association is opened per image both in manual send and in auto-send. Multiple Send operations can be performed. The Storage Commitment Request (SCU) initiates a new single association for all the images that were successfully stored on the remote AE. The Modality Performed Procedure Step Message (SCU) initiates a new DICOM association for each MPPS message. The Maximum Number of associations that the DICOM Server AE (SCU) can open in parallel is 5. The Infinia_SCANNER AE (SCP) can have multiple DICOM associations open simultaneously to service verifications. The Maximum Number of associations that the Infinia_SCANNER AE (SCP) can accept in parallel is

18 Asynchronous Nature Asynchronous mode is not supported. All operations are performed synchronously Implementation Identifying Information The Implementation UID for this DICOM v3.0 Implementation is: Infinia Implementation UID Association Initiation Policy The Infinia_SCANNER Server AE initiates a new association Due to an image send operation being initiated from the Infinia user interface, or by auto send option. Due to a storage commitment request operation being initiated from the Infinia user interface upon successful image transfer or by auto send option Due to a Verify operation initiated to determine whether the remote DICOM station is operational. Due to modality worklist request being initiated from the Infinia user interface A new association is initiated for each PPS message Real-World Activity: Image Send Associated Real-World Activity The operator must both select image(s) to be transferred from the Patient Selector and select a destination by pressing the destination button. Once these selections have been made, the operator pushes the Transfer Destination button to initiate an image send operation. The Infinia_SCANNER Server will then initiate an association with the remote AE in order to send the selected image(s) one image per association and will accept and interparty responses received from the remote AE. Note that for each send operation, typically one association is established. The exception to this is that, if an image send fails, the current association is closed and another is opened for sending the remaining image(s). The UI will indicate the status of the dataset being transferred. The status can be one of PENDING, SUCCESS, or FAILURE. The associated error messages due to a failed status can be found in system log Proposed Presentation Context Table The following table shows the proposed presentation contexts for the Infinia_SCANNER Server AE after real-world activity Image Send has been initiated: 2-5

19 Presentation Context Table - Proposed Abstract Syntax Transfer Syntax Role Extended Name UID Name List UID List Negotiation Nuclear Medicine Implicit VR Little Endian SCU None Image Storage Explicit VR Little Endian Secondary Image Capture Storage Implicit VR Little Endian Explicit VR Little Endian SCU None SOP Specific DICOM Conformance Statement for all Storage SOP Classes This implementation can perform a single C-STORE operation over a single association. All the operations used by this SOP class support an Association Timer. This timer is started when the association request is sent, and is stopped when the respective response is received. The default time-out value is 15 seconds and is not configurable. All the operations used by this SOP class support a Session Timer. This timer is started when the association is established, and stopped when the association is ended. The default time-out value is 3000 seconds. If any of the two timers mentioned above expires, the connection is closed and the operation in progress is considered failed. Upon receiving a C-STORE confirmation containing a Successful status, this implementation will close the current association and perform the next C-STORE operation(s). Upon receiving a C-STORE confirmation containing a Refused status, this implementation will terminate the association. Upon receiving a C-STORE confirmation containing a status other than Successful or Warning, this implementation will consider the current request to be a failure but will continue to attempt to send any remaining images in the request on a different association. Following are the status codes that are more specifically processed when receiving messages from Storage SCP equipment: Service Status Status Codes Further Meaning Application Behavior When receiving Status Codes Refused A7xx Out of resources. The message "Transfer Failed" is displayed in Transfer Log. Error Cxxx Cannot Understand The message "Transfer Failed" is displayed in Transfer Log. A900 Data Set does not match SOP Class The message "Transfer Failed" is displayed in Transfer Log. 2-6

20 Service Status Status Codes Warning B000 Coercion of Data Elements The message Warning!! Instance does not match SOP Class or Coercion of data elements posted to the Log. B007 Further Meaning Data Set does not match SOP Class Application Behavior When receiving Status Codes The message Warning!! Instance does not match SOP Class or Coercion of data elements posted to the Log. B006 Elements Discarded The message Warning!! Instance does not match SOP Class or Coercion of data elements posted to the Log. Success 0000 The message Transfer Completed posted to the Log Real -world Activity: Storage Commitment Push Model Associated Real-World Activity The operator must both select image(s) to be transferred from the Patient Selector and select a destination from the list of previously defined destinations. Once these selections have been made, the operator pushes the Destination button to initiate an image send operation. The Infinia_SCANNER will then initiate the multiple associations with the remote AE in order to send the selected image(s) and will accept interparty responses received from the remote AE. If the destination is configured as storage commitment capable or the destination is configured to use other storage commitment capable devices, the Infinia SCANNER will initiate one separate association with the remote storage commitment capable AE in order to request a storage commitment for all the successfully transferred image(s). Note The storage commitment request it will always use a new association for requesting a commitment for the successfully transferred image(s). The storage commitment response will usually require the remote AE to initiate a new association with the Infinia_SCANNER. The UI shows the status of the storage commitment request progress. The status can be either PENDING, SUCCESS, or FAILURE. The associated error messages due to a failure can be found in the system log Proposed Presentation Context Table The following table shows the proposed presentation contexts for the Infinia_SCANNER Server AE after real-world activity Storage Commitment Request has been initiated: Presentation Context Table - Proposed Abstract Syntax Transfer Syntax Role Extended Name UID Name List UID List Negotiation Storage Commitment Push Model SOP Class Implicit VR Little Endian Explicit VR Little Endian SCU None SOP Specific DICOM Conformance Statement for Storage Commitment SOP Class The storage commitment request (N-ACTION) can perform a storage commitment request for multiple images over a single association. A new association is initiated for the storage commitment request for every group of successfully transferred image(s). 2-7

21 All the operations used by this SOP class support an Association Timer. This timer is started when the association request is sent, and is stopped when the respective response is received. The default time-out value is 15 seconds, and is not configurable. All the operations used by this SOP class support a Session Timer. This timer is started when the association is established, and stopped when the association is ended. The default time-out value is 360 seconds and is not configurable. If any of the two timers mentioned above expires, the connection is closed and the operation in progress is considered failed. Upon receiving a N-ACTION confirmation containing a Successful status, the next N_ACTION_RQ operation is performed for the new association. Upon receiving a N-ACTION confirmation containing a Refused status, the association is terminated. The reason for termination is recorded in the system log file. Upon receiving a N-ACTION confirmation containing a status other than the DICOM standard defined values, the current request is considered to be a failure and will terminate the association. The reason for termination is recorded in the system log file. As part of the storage commitment implementation, Remote AE (SCP) will initiate an association to this implementation and will send an N-EVENT-REPORT. The attribute of the N-EVENT-REPORT message will include an indication on all images for which a commitment has succeeded and those for which it has failed. The receipt of a N-EVENT-REPORT on an association that Infinia_SCANNER has initiated is not supported. The Remote AE (SCP) must initiate a new association in order to send the new N-EVENT-REPORT. Table 2-1. Storage Commitment Failure Reasons Module for N-action Failure Reason Meaning SCU Behavior 0110H Processing failure Error logged 0112H No such object instance Error logged 0213H Resource limitation Error logged 0122H Referenced SOP Class not supported Error logged 0119H Class / Instance conflict Error logged 0131H Duplicate transaction UID Error logged Real-world Activity: Verify Associated real-world Activity Service personnel invoke the DICOM Station Configuration Utility from the Infinia user interface. The AE Title of the remote DICOM AE is supplied on the command line along with the IP address and the port number of the remote 2-8

22 DICOM station.the Infinia_SCANNER server will initiate an association with the remote DICOM AE in order to verify communication at the application level. The success or failure of the verification process is displayed to the user Proposed Presentation Context Table Presentation Context Table - Proposed Abstract Syntax Transfer Syntax Role Extended Name UID Name List UID List Negotiation Verification SOP Class Implicit VR Little Endian SCU None SOP Specific DICOM Conformance Statement for Verification SOP Class The Infinia_SCANNER Server AE provides standard conformance to the DICOM Verification Service Class. All the operations used by this SOP class support an Association Timer. This timer is started when the association request is sent, and is stopped when the respective response is received. The default time-out value is 15 seconds and is not configurable Real-World Activity: Modality Worklist Associated Real-World Activity The user requests Infinia to query the remote AE for a worklist Proposed Presentation Context Table The following table shows the proposed presentation contexts for the Infinia_SCANNER Server AE after real-world activity Modality Work List has been initiated: Presentation Context Table - Proposed Abstract Syntax Transfer Syntax Role Extended Name UID Name List UID List Negotiation Modality Worklist Implicit VR Little Endian SCU None C - FIND Explicit VR Little Endian SOP Specific DICOM Conformance Statement for all Query SOP Classes Infinia provides standard conformance to the DICOM V3.0 Modality Worklist Service Class as an SCU for the following SOP Classes: Modality Worklist C-FIND, UID =

23 If Modality Worklist query failed, the user receives a notification message. All the operations used by this SOP class support an Association Timer. This timer is started when the association request is sent, and is stopped when the respective response is received. The default time-out value is 15 seconds, and is not configurable. All the operations used by this SOP class support a Session Timer. This timer is started when the association is established, and stopped when association is ended. The default time-out value is 360 seconds. If any of the two timers mentioned above expires, the connection is closed and the operation in progress is considered failed Real-World Activity: Performed Procedure Step creation and update Associated Real-World Activity Infinia_SCANNER AE generates an association establishment request upon the following events: In order to issue an N-CREATE message with Performed Procedure Step status = IN PROGRESS when the acquisition of the first scan in the protocol is started. Note In the acquisition station terminology, "Protocol" means "Scheduled Procedure Step. Upon starting additional scans acquisition in the same protocol, no additional MPPS message is sent. In order to issue an N-SET message with Performed Procedure Step status = IN PROGRESS upon every scan acquisition completion. Note that an N-SET message is sent only upon successful completion of a scan. No MPPS message is sent when operator quits a scan or when the scan is aborted due to an error. In order to send an N-SET message with Performed Procedure Step status = COMPLETED in the following events: -1 When the operator presses the "Protocol Completed" button for a selected protocol. -2 When the operator presses the "Protocol Completed" button where a study instance is selected. The N-SET message is sent for all protocols in a study that has acquired data. Note that pressing "Protocol Completed" when the protocol has no acquired images that were not reported by PPS (N-CREATE message was not sent) will not result in sending N-SET MPPS message. -3 When the acquisition of the last scan in a protocol is completed leaving no non-acquired scans in the protocol, the protocol is automatically considered completed. In order to send an N-SET message with Performed Procedure Step status = DISCONTINUED when the operator presses the "Discontinue Protocol" button for a selected protocol or for all of the protocols in a study when study is selected. The message will be set with the reason for discontinuing the protocol as selected by the operator. 2-10

24 Proposed Presentation Contexts The following table shows the proposed presentation contexts for the Infinia_SCANNER AE after any of the real-world activities listed in Section are initiated. Presentation Context Table - Proposed Abstract Syntax Transfer Syntax Role Extended Name UID Name List UID List Negotiation Modality Performed Implicit VR Little Endian SCU None Procedure Step Explicit VR Little Endian SOP Specific Conformance statement for MPPS SOP class When sending a PPS message, the system looks for a station configured to act as a PPS manager. Upon association, if the remote AE does not support the proposed Presentation context, an appropriate error message is logged. Only one association is opened at a time. All the operations used by this SOP class support an association timer. The timer is started when a request (N-CREATE request or N-SET request) is sent, and stopped when the respective response is received. The default time-out value is 15 seconds, and it is not configurable. All the operations used by this SOP class support a Session Timer. This timer is started when the association is established, and stopped when association is ended. The default time-out value is 3000 seconds, and it is not configurable. If any of the above timers expires the association is aborted and the operation in-progress is considered FAILED. The user can see if the PPS message was received successfully or unsuccessfully, using the "Transfer Log" screen. If the N-CREATE operation fails, the system marks the condition to enable sending N-CREATE again upon next scan's acquisition start. If the N-SET operation fails upon scan's acquisition completion, an error is logged. The operator is not informed in any way. This is an intermediate update that will be reported again by a following COMPLETE or DISCONTINUE message or additional scan's completion N-SET message(s) after completion of the next scan(s) of the same protocol. The PPS N-SET request can inform of completion of multiple images over a single association. A new association is initiated for the PPS request upon a scan completion that may result in multiple images. And upon pressing "Protocol completed" or 'Discontinue protocol" which may encapsulate multiple series and images Transfer Syntax Selection Policies The transfer syntax selection policy is as follows: Only the following transfer syntaxes are proposed: Implicit VR Little Endian ( ), Explicit VR Little Endian ( ) 2-11

25 Among all proposed transfer syntaxes, the Explicit Little Endian transfer syntax is chosen first if all proposed Transfer Syntaxes are accepted by Remote AE Association Acceptance Policy The Infinia_SCANNER Server AE places no limitation on whom may connect to it. The maximum number of associations accepted in parallel is limited to 5. Any remote AE can open an association to the DICOM Server AE for the purpose of application level communication verification Real-World Activity: Verify SCP Associated Real-World Activity The Infinia_SCANNER Server AE is always listening for associations. No operator action is required to respond to a Verification request. The real-world activity associated with the Verification request is to send a C-ECHO-RSP message with a status of success to the requesting AE Accepted Presentation Context Table Presentation Context Table - Accepted Abstract Syntax Transfer Syntax Role Extended Name UID Name List UID List Negotiation Verification SOP Class Implicit VR Little Endian Explicit VR Little Endian SCP None SOP Specific DICOM Conformance Statement for Verification SOP Class The Infinia_SCANNER Server AE provides standard conformance to the DICOM verification service class Real-World Activity: Receive N-EVENT-REPORT from Storage Commitment SCP Associated Real-World Activity As part of the storage commitment implementation, Remote AE (SCP) initiates an association to this implementation and sends an N-EVENT-REPORT. The attribute of the N-EVENT-REPORT message includes an indication on all images for which a commitment has succeeded and those for which it has failed. The receipt of an N-EVENT-REPORT on an association that Infinia_SCANNER Server AE has initiated is not supported. The Remote AE (SCP) must initiate a new association in order to send the new N-EVENT-REPORT. On reception of a successful N-EVENT-REPORT-RQ notification from the Storage Commitment Provider, the images are flagged as committed in the database. 2-12

26 Accepted Presentation Context Table The following table shows the proposed presentation contexts for the Infinia_SCANNER Server AE after real-world activity Storage Commitment Request has been initiated: Presentation Context Table - Accepted Abstract Syntax Transfer Syntax Role Extended Name UID Name List UID List Negotiation Storage Commitment Push Model SOP Class Implicit VR Little Endian Explicit VR Little Endian SCU None Presentation Context Acceptance Criterion The Presentation Context that will be accepted by the Infinia_SCANNER Server will be the one to which the remote Storage SCP has accorded the highest priority and that is supported by the Infinia_SCANNER Server Transfer Syntax Selection Policies A Transfer Syntax that will be selected will be the one to which the remote SCU has accorded the highest priority and that is supported by the Infinia_SCANNER Server. 2.4 COMMUNICATION PROFILES Support Communication Stacks (PS 3.8, PS 3.9) DICOM Upper Layer (PS 3.8) is supported using TCP/IP OSI Stack The OSI Communication Stack is not supported by this implementation TCP/IP Stack The TCP/IP Communication Stack is inherited from the Windows operating system API Not applicable to this product Physical Media Support Ethernet provides the physical network layer for this product. 2-13

27 2.4.4 Point-to-Point Stack The Point-to-Point Communication Stack is not supported by this implementation. 2.5 EXTENSIONS / SPECIALIZATIONS / PRIVATIZATIONS Standard Extended/Specialized/Private SOPs Standard Extended SOP Classes Infinia NM Images are Standard Extended NM Image Storage SOP Class (see Section 3 for a complete description). Infinia Secondary Capture Images are Standard Extended Secondary Capture Image Storage SOP Class (see Section 8 for a complete description) Private SOP Class Infinia implements a Private SOP Class for sending Private Series Data objects (acquisition Raw data List data) to Remote AE for processing and archiving purposes. Series data objects are not visible on the Infinia patient selector, but are generally sent automatically with image data if the entire series is selected for transfer. For details of the Infinia Private Data Objects refer to Section Private Transfer Syntaxes Infinia does not implement any private transfer syntaxes. 2.6 CONFIGURATION The Infinia system is configured by GE Healthcare Field Service Engineers. The DICOM configuration items below are configurable or re-configurable by a Field Service Engineer but are not accessible through the Infinia user interface AE Title/Presentation Address Mapping Infinia allows for the configuration of the mapping of remote AE titles to IP addresses and ports. The IP address of a remote AE may be in a different subnet (using routing). A router is configurable to ensure communication from one sub-net to another. This configuration is performed by GE Healthcare Field Service Engineers Configuration Parameters The following parameters are configurable for the DICOM Server AE: Local AE Title default value is INFINIA_SCANNER Local IP address 2-14

28 Local DICOM Port Number default value is 104 Note that PDU length and any time-outs are not configurable for Infinia. The configuration of IP routers and subnet mask is available on a OS level. The following parameters are configurable for the Remote DICOM AE: Remote AE Title Remote IP address Remote DICOM Port Number default value is 104 Remote AE functionality flags: Send destination Auto-send destination Auto-Processing destination (shall be used for Xeleris Workstations only) Modality Worklist Provider MPPS Provider 2.7 SUPPORT OF EXTENDED CHARACTER SETS Infinia will support only the ISO_IR 100 (ISO :1987 Latin alphabet N 1. supplementary set) as extended character sets. 2.8 CODES AND CONTROLLED TERMINOLOGY Fixed Coded Terminology The product uses the fixed (non-configurable, non-extensible) coded terminology in Image SOP Instance attributes: (0054, 0300) - Radionuclide Code Sequence (See Section NM Isotope Module) (0054, 0412) - Patient Orientation Modifier (See Section NM/PET Patient Orientation Module) The Infinia DICOM implementation is capable of supporting arbitrary coding schemes for Procedure and Protocol Codes. The contents of Requested Procedure Code Sequence (0032,1064) and Scheduled Protocol Code Sequence (0040,0008) supplied in Worklist Items will be mapped to Image IOD and MPPS attributes as described in DICOM Standard. During installation, a service technician will establish a mapping between the site-specific codes and the Protocol Names used internally to identify acquisition protocols. A remote AE station configured to act as Worklist provider is configured to map according to one of three tags: (0032,1060) - Requested Procedure Code Sequence (0040,0008) - Scheduled Protocol Code Sequence (0040,0007) - Scheduled Procedure Step Description 2-15