Scheduling Reports Launch the Scheduling Tool... 1 Description... 1 Overview of Scheduling Components... 2

Transcription

1 PeopleSoft Data Dictionary EPM: Scheduling Reports Table of Contents Scheduling Reports Launch the Scheduling Tool... 1 Description... 1 Overview of Scheduling Components... 2 Distribution Printer...2 Library...4 Managed Reporting... 8 Frequency Run Interval: Once... 9 Run Interval: Weeks... 9 Run Interval: Months Report Options Send the Report in this Format Execution ID Parameter Name/Value Notification Notification Options Additional Notification Settings Advanced...17 Priority Level Enabled/Disabled Delete Additional Information...18 Edit... 18

2 Scheduling Reports After a query has been designed and saved, some may find it useful set it up so that the job (query) runs at a certain time(s) or at specific intervals and the report is distributed in certain ways. This can be accomplished with the Dashboard Scheduling tool. Launch the Scheduling Tool: To launch the Scheduling tool from Dashboard, choose the report you wish to schedule from your Custom Reports folder, right click on it, and select Schedule. The Scheduling tool will initially appear like this. Description: Near the top of the Scheduling tool, default text will populate the Description box. The Description is essentially the title of this report s schedule process. You may want to change this text to be more relatable to your report. Note: Any box that has an (asterisk) next to it must be populated with information. 5/17/2011 Page 1

3 Overview of Scheduling Components: In addition to Description, the Scheduling tool contains five main areas/components that need to be considered when scheduling a job: 1) Distribution 2) Frequency 3) Report Options 4) Notification 5) Advanced These five areas each require different information and settings that need to be set, confirmed or inputted before running or saving a scheduled query. Each area can be collapsed or expanded by clicking on the triangles next to their titles. Distribution With the Distribution component, you can specify how the report will be distributed, and to whom or where. There are three main distribution options: Printer, Library, and Managed Reporting. Each have different settings that need to be set or comfirmed in order to distribute the report correctly. Printer: Distributing a report to a printer may not be the most common option, but it can be handy to have a report print out automatically at a scheduled time. When distributing a report to a printer, there are a few different options to select from. You can distribute a report to a Single Address, or send it to a Distribution List. The other option, Distribution File is not suggested for use. 5/17/2011 Page 2

4 Single Address: When distributing to a single printer, simply enter the IP address of the printer you wish to distribute the report to in the textbox next to the Single Address drop down box. Example IP address Distribution List: This option allows you to send the report to several different printers that have been previously established on a distribution list. To create a new distribution list that can then be selected from the Distribution List dropdown box, follow the these steps: 1. In WebFocus Dashboard, navigate to the Schedule tab, select Distribution List and click New. 2. A new window should pop up with several boxes. Enter the name of your new distribution list in the box next to Distribution List. 3. Change the Access from Public to Private. 5/17/2011 Page 3

5 4. Change the Distribution Method from to Printer. EPM Query Instructions Scheduling Reports 5. Under the Destination column, add IP addresses one at a time for printers you wish the report to be distributed to. When finished adding IP addresses, click Save. After you have created your new distribution list, you can select it from the drop down box next to Distribution List in the Distribution section of the Scheduling tool. Newly created distribution list Library: Distributing a report to one or more Dashboard libraries is perhaps the most common way to distribute a scheduled report. When choosing Library as the distribution setting, several more settings and information boxes appear regarding how and to which libraries the report is sent to. 5/17/2011 Page 4

6 The Distribution section with the default Library settings. Category in Library: By leaving this box un checked, the report will be distributed to a default category within the Dashboard library called Domain Name (see above example). If you would like a more specific destination for the report, you can check the box and select another category. After checking the box, you will be required to select a category by clicking on the folder icon. This will open a screen for you to either choose a category, or create a custom category name. Once selected, click OK to set. Access Type: Access Type indicates who will have access to this report. The default setting is Owner, meaning that you alone have access and it will be distributed only to your library. The Public option is never to be used. The final option for access type is Access List. Access List allows you to distribute the report to a list of recipients you choose. When creating an Access List, you must contact your WebFocus Administrator (Steve Booton, UNL Campus). 5/17/2011 Page 5

7 Expiration: The Expiration setting allows you to indicate how long the report will be available in a library. Setting expiration will delete unwanted reports after they have expired. The default expiration is set to save one version of the report. When another version is created, the old one will be deleted. Settings other than version(s) include: Never Expire, days, weeks, months and years. To change the number of versions you want the library to save, simply click the arrow boxes next to the number. To change the Expiration to another setting, select one from the drop down box. If you choose Never Expire, the reports will remain in a library until they are manually deleted. The time sensitive options will delete the report after the specified number of days, weeks, months or years. If you choose any of the time sensitive options, you will be required to specify the number in the same manner you chose the number of versions. Send an after Report saved to Library: If this box is checked, an notification will be sent out after the job has been run and the report has been saved to a library in Dashboard. This will contain a link to the report and depending on the Access setting, will be sent either to you (Owner), or the individuals included on your Access List. The highlighted text indicates areas to fill in when setting up the that will be sent out. From will appear as the sender of the . Reply Address is the address of the person in the From line. Subject will appear in the subject line of the . Message is the text that will appear above the link in the . 5/17/2011 Page 6

8 A resulting may look like this: Clicking the link will open up a browser and take you to this screen: Once an individual logs in with their Dashboard User ID and Password, the report will be available to open or download. View Report in Library: To view a report in your Dashboard library, simply click on the Library tab in Dashboard and select the category folder and your report should be inside. 5/17/2011 Page 7

9 Managed Reporting: The third distribution setting is Managed Reporting. This setting sends your report to a folder under My Reports in Dashboard with a folder name you specify on the Scheduling tool. To specify a Folder Name, simply type it into the box: Here is an example of how to locate your report distributed by Managed Reporting: Folder Name Report 5/17/2011 Page 8

10 Frequency The second component that is key to scheduling reports is Frequency. Setting the frequency determines how often your job will run, at what intervals, and at what times. The Frequency component has several settings for Run Interval, but this document will only detail those most commonly used. The selected Run Interval option will determine what other frequency related settings will be required. Run Interval: Once The default interval is Once, meaning that unless otherwise specified, the report will only run one time. The day and time for the scheduled run will initially default to the current time. To indicate a different day or time you want the job to run, you will have to change the settings next to Start Schedule. To change the day, click on the down arrow and select a day from the calendar that appears. Arrows at the top allow you to scroll to different months. To change the hour, click on the up/down arrow buttons. To change the minute, click on the minutes, and then use the arrow buttons. Run Interval: Weeks To have the report run every week or several weeks, select Weeks from the drop down box next to Run Interval. 5/17/2011 Page 9

11 Selecting the Run Interval to Weeks will change the Scheduling tool s Frequency view to the following: Start and End Schedule indicate when the report will start and quit and will function the same as in the above example. Clicking the up/down arrow buttons changes the number of weeks between each scheduled report. Indicate which day(s) of the week you want the report to run by selecting one or more of the checkboxes. Run Interval: Months Selecting the Run Interval Months will schedule your report to run in specific months, on certain days of the month, and/or every so many months. The Scheduling tool s Frequency view will change to this: Start and End Schedule function exactly the same as in the above example. Same as above, except with months instead of weeks. Days is the default selection allowing you to click on days on the calendar to indicate on which days the report will run. The option allows you to specify the days in another way. (Ex: the second Monday) 5/17/2011 Page 10

12 Report Options The Report Options component of the Scheduling tool relate to how the report will be formatted, the user s scheduling credentials, and the Parameters and respective Parameter values. It is important to note that the formatting function of Report Options is dependent on which Distribution Option a user selects (i.e. Printer vs. Library and Managed Reporting). The default settings for Report Options appear below. Send the Report in this Format: This setting determines how the report will be formatted. A report can be formatted as a text document, an Excel spreadsheet or an XML file just to name a few. There are many variations to formatting when distributing reports to a library or using managed reporting. However, as mentioned above, the choices in this drop down box are different for reports being distributed to a printer. The printer formatting options are limited to only the following: To select a format, select from the options in the drop down box. DOC will format the report as non formatted text PS most likely option, has formatting (only used when report is to be a PDF file) WP very similar to DOC Note: This limited list of formats is only applicable to printer distribution. Library and Managed Reporting have a much longer, extended list of format options. 5/17/2011 Page 11

13 Execution ID: Execution ID refers to the ID number for the individual that will be associated with the scheduled report. The Execution ID may appear in red with an error message the first time a user schedules a report. To correct this, type in your NU ID and click Set Password. A Password Editor box will appear for you to enter in and confirm your password. Once this is complete, click OK and your status should update and the error message should disappear. Parameter Name/Value: This section will contain the text you ve set as your filter(s) s prompt and clicking on it will prompt you to enter the value(s) you desire for the report. A Parameter Editor box will appear with your prompt message as the Description. Enter your value(s) into the Value box and click OK. The value(s) will now appear under Parameter Value. 5/17/2011 Page 12

14 Notification Notification is the component of the Scheduling tool that allows you to schedule an to be sent out notifying you or someone else that the job ran. In addition, you can specify where you want the notification sent, under what circumstances, and whether you want a brief or full notification. The main options for notification can be seen in the drop down box below: Click on the dropdown arrow to see notification options. Notification Options: There are three different options for Notification: Never, Always, and On Error. Notification: Never Never is the default option for notification. Unless you change this option, you will never receive an notification regarding your scheduled job. Notification: Always When Always is selected, an will be sent out to you or whomever you specify with details about the scheduled job every time the process is run. This means that regardless of whether there were errors or it was successfully completed, you will be notified when the process is finished. When Always is selected, a new set of information will need to be inputted to confirm notification type and destinations. Notification: On Error On Error is a common setting for notification options. This means that an will only be sent out in the event of an error occurring during the process of running the query. As with Always, the On Error option will require you to fill in several other information boxes about the notification (as can be seen in the next example). 5/17/2011 Page 13

15 Additional Notification Settings: When using notification options Always or On Error, one must also indicate the type of notification, the address of the individuals receiving the notification, the address that they can reply to, and the Subject line of the . Notification Type: One can either choose to have a Full Notification, a Brief Notification, or a Full & Brief Notification. Click on the dropdown arrow to see Notification Types. Full Notification: A Full Notification contains a large amount of information about the job that was run. A full notification may look similar to the following: 5/17/2011 Page 14

16 To schedule a Full Notification, select it from the drop down box, and insert the address of the recipient in the box next to Full Notification and an address for this individual to reply to if necessary (often the address of the report author). Finally, specify your text in the box next to Subject or leave it in its default form. Recipient s address. Report author s address Default text for Subject line Brief Notification: A Brief Notification contains some of the same information as a Full Notification, but collapses much of it into a format that just highlights the essential information. A Brief Notification may look like this: The steps involved in scheduling a Brief Notification are very similar to those of a Full Notification: Recipient s address. Report author s address Default text for Subject line 5/17/2011 Page 15

17 Full & Brief Notification: This option sends out notifications of both types, either to the same individual, or to different individuals. The example below shows a report scheduled to send a Full Notification to the author of the report (You), and a Brief Notification to another individual. Full recipient s address. Brief recipient s address Report author s address Default text for Subject line 5/17/2011 Page 16

18 Advanced Advanced is the final component to consider when scheduling a report. The Advanced default settings will most likely remain unchanged for most scheduling purposes. Priority Level: Priority Level has a range from 1 to 5. Always leave your priority setting at 3. Enabled/Disabled: This box enables the job to run on the schedule that you set up. Scheduling will be enabled by default unless you click this box to remove the checkmark. This disables the schedule but does not delete what has been set up and saved. Delete: By checking this box, you are setting the Scheduling tool to delete the schedule you set up after the job has run all of the scheduled processes. If the schedule expires, it will be deleted. If this box remains unchecked, the scheduling settings will not be deleted. 5/17/2011 Page 17

19 Additional Information Once you have set up your Scheduling tool to run your process, you can click the the scheduling tool to run a report. This is helpful for testing. icon at the top of When you ve finished confirming all of the scheduling settings, you need to click the icon to save your scheduled process. If the Start Schedule is set to the current time, the job will run immediately after you save. Edit: To go back and edit your saved schedule, click on the Schedule tab, select the schedule you want to edit and click Open. You may need to disable the pop up blocker on your browser for the saved schedule to appear for editing. 5/17/2011 Page 18