Supplementary Manual for Model 287a Ionizer Performance Analyzer. 287a-1/100A V1.12 P/N

Size: px

Start display at page:

Download "Supplementary Manual for Model 287a Ionizer Performance Analyzer. 287a-1/100A V1.12 P/N"

Darcy Mitchell
5 years ago
Views:

1 Supplementary for Model 287a Ionizer Performance Analyzer 287a-1/100A V1.12 P/N

2 IPA 287a Display and Operational Chart Press [On/Off] to turn on the unit ME MONROE 287a Version 1.12 Press [On/Off] or wait for 5 seconds MemUsed A30%M50% ClrData Y/N? N Press and hold [ON/OFF] between 2-4 seconds Memory used: Auto-sequence tests 30%. tests 50%. If no data in memory (I.e. A=0%M=0%), this screen is not shown. to make the choice. Then press [Enter] to select and exit. Or press [ON/OFF] for not to do anything and exit. Temperature=28C, Battery=9.0V, Humidity=34%RH longer than 4 seconds Off Set-Up Review data Press [^] or [v] : scroll through the menu [Enter] : select the menu item [ON/OFF]: back to Main Clear data RvwData A30%M50% ClrData A30%M50% ClrData N Y/N? A30%M50% See Page 2 Auto Sequence Auto Seq Auto Seq Test delay test duration Tst delay 5 sec Bal (Y/N) Y Bal dur 22 sec Tst delay 5 sec 0-30 sec Bal (Y/N) Y Y/N? Bal dur 22 sec sec to scroll through the choices. Then press [Enter] to select and exit. Or press [ON/OFF] for not to do anything and exit. Auto shut down AutoShtDwn 10min AutoShtDwn 10min 0=disabl 1-15min Restore factory defaults: AutoSeq= Tst delay = 5 = Y duration= 30 sec. AutoShtDwn= 1 minute Fac. Default Exit Fac. Default N Y/N? or [ON/OFF] back to Main IPA287Supplement Page 1 Monroe Electronics, Inc.

3 From Page 1 M1D+ 6.8s M1TH 25C 31%RH M1D + 6.8s test Test #1 (1-0) + test time in seconds test Test #1 (1-0) Temperature Humidity M1TH 25C 31%RH M2D- 7.3s M2TH 25C 31%RH M3B+0016v -0010v M3TH 25C 31%RH M2D - 7.3s test Test #2 (1-0) - test time in seconds M3B+0012v -0003v test Test #3 (1-0) + and - Voltage peaks M4D+ 10.6s M4TH 23C 30%RH MDA+08.7s -07.3s 11D+07.3s -08.9s 12D+09.3s -06.2s 13D+20.1s -12.9s 1AD+09.3s -06.2s MDA+08.7s -07.3s Averages + and - averages 11D+07.3s -08.9s AutoSeq. group #1 (1-0) Test #1 (1-3) test + and - decay time in seconds 1AD+09.3s -06.2s AutoSeq. group #1 (1-0) Average + and - decay average of the group 1Ba+0017v -0005v 1TH 25C 30%RH AutoSeq. group #1 (1-0) test + and - voltage peaks or [ON/OFF] back to Main 1Ba+0017v -0005v IPA287Supplement Page 2 Monroe Electronics, Inc.

4 Plus Test (press [^] button ) The 287 unit will start by zeroing then Charge to over +1050V, then. The decay timer starts at +1000V and stops at +100V. Test (press and hold [^] or [v] button for 2-4 seconds) The 287 will start by zeroing, then for the time duration. Start recording Min and Max voltage levels after 5 seconds. Up to 10 test results can be stored in memory. They are named M1 thru M0 where M0 is the 10 th test. Press [+] and hold longer than 4 seconds + between 2-4 seconds + 950V +Charge +1030V V 3.6s Test #1 (1-0) + Timer starts at 1000V and stops at 100V 28C 9.0V 34% M2B + 1V 5.2s +0002mx 0004mn Test #2 (1-0) will abort any on-going test. After the test complete, review data begins. will scroll through the data. or [ON/OFF] back to Main Voltage update duration timer Min and Max voltages start recording after 5 seconds. IPA287Supplement Page 3 Monroe Electronics, Inc.

5 Minus Test (press [v] button ) The 287 unit will start by zeroing then Charge to over +1050V, then. The decay timer starts at +1000V and stops at +100V. Test (press and hold [^] or [v] button for 2-4 seconds) The 287 will start by zeroing, then for the time duration. Start recording Min and Max peaks after 5 seconds. Press [-] and hold longer than 4 seconds - between 2-4 seconds - 950V -Charge -1030V V 3.6s Test #3 (1-0) - 28C 9.0V 34% M4B +1V 5.2s +0002mx 0004mn Test #4 (1-0) will abort any on going test. After the test complete, review data begins. will scroll through the data. or [ON/OFF] back to Main Voltage update duration timer min and max voltages start recording after 5 seconds. Timer starts at 1000V and stops at 100V IPA287Supplement Page 4 Monroe Electronics, Inc.

6 Auto Sequence Group Test (press [AUTO] button ) The 287 unit will perform up to 10 groups of automatic test sequences and store the results in memory. Groups are named 1 thru 0 where 0 is the 10 th. Each group has 3 +decay, 3-decay, and an optional balance test. The sequence can be set in the Set-Up Menu. test : Zeroing to <5V, Charge to over +/-1050V, then. The decay timer starts at +/-1000V and stops at +/-100V. Test: Zeroing to <5V, then for the time duration. Start recording Voltage peaks after 5 seconds. The delay time between the tests can be set in the Set-Up Menu. Auto Sequence Test Press [AUTO] and hold longer than 2 seconds AUTO + 950V +Charge Group #1 (1-0) Test #1 (1-3) V V 3.6s + 20V 8.6s Delay 6 sec go on for the other 5 decay tests... Timer starts at 1000V and stops at 100V. 28C 9.0V 34% 1Ba + 1V 5.2s +0002mx 0004mn Review test results Group #1 (1-0) test Voltage update duration timer Max and min voltages start recording after 5 seconds. will abort any on going test and back to Main. After the test complete, review data begins. will scroll through the data. or [ON/OFF] back to Main IPA287Supplement Page 5 Monroe Electronics, Inc.

7 Error Messages What to do... Battery Low 6.2V Off in 5 sec. Change the battery. 28C 9.0V Er%RH Humidity is out of 10% - 90% range or sensor failure. If sensor failure, contact factory for repair V +Charge Unable to charge Unable to charge to 1050V. Make sure nothing is contacting the charge plate and the standoffs underneath are clean. This may also be caused by too much load on the plate. Press enter to return to the main screen. Remove the 287 from the ionizer and recheck. If problem persists contact the manufacturer for calibration V 200.s failed time out at 200 seconds, and the plate reading is still above 100V. Check your ionizer. Recommend using Monroe Model 288 EEProm Fail Contact factory. IPA287Supplement Page 6 Monroe Electronics, Inc.

Model 287a Ionizer Performance Analyzer

Operator s Manual Model 287a Ionizer Performance Analyzer P/N 0340172 287a-1/100 V1.13 06222017 100 Housel Ave PO Box 535 Lyndonville NY 14098 585-765-2254 fax: 585-765-9330 monroe-electronics.com CONTENTS