COMPACT DIGITAL AUDIO

Transcription

1 CD-3500 Multiple Compact Disc Player CD 3500 MULTIPLE COMPACT DISC PLAYER TIMER OFF PLAY DISC SELECTOR DISC SKIP OPEN/CLOSE ON OFF POWER COMPACT DIGITAL AUDIO 5DISC AUTOMATIC DISC LOADING SYSTEM HIGH DENSITY 1-BIT D/A CONVERTER PROG RANDOM REPEAT ALL 1 DISCS TRACK INDEX INTRO PROG/REV RANDOM REPEAT TIMER DISC INTRO SKIP-SEARCH STOP/CLEAR PLAY/PAUSE

2 Contents 1. Unpacking and Installation Read this Before Operating Your Unit Front Panel Controls Rear Panel Controls Multifunction Fluorescent Display Operations Troubleshooting Guide Specifications...17 OFFICE : BANGHAK-DONG, DOBONG-KU, SEOUL, KOREA TEL : ~8, FAX : Home Page : export@inter-m.com

3 Unpacking and Installation Your new high fidelity Multi Compact Disc Player is designed to deliver maximum enjoyment and years of trouble free service. Please take a few moments to read this manual thoroughly. It will explain the features and operation of your Multi Compact Disc Player and help a trouble free installation. Please unpack your Multi Compact Disc Player carefully. We recommend that you save the carton and packing material. They will be helpful if you ever need to move your unit and may be required if you ever need to return it for service. Your Multi Compact Disc Player is designed to be placed in horizontal position and it is important to allow at least two inches of space behind your unit for adequate ventilation and cabling convenience. To avoid early damage, never place the unit near radiators, in front of heating vents, in direct sunlight, or in excessively humid or dusty location. Connect your complementary components as illustrated in the following section. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Caution: This symbol is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying the appliance. To prevent electric shock do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Attentions: Pour prévenir les chocs électriques ne pas utiliser cette fiche polarisée avec un prolongateur, une prise de courant on une autre sortie de courant, sauf si les lames peuvent étre insérées à fond sans en laisser aucune partie à découvert. CD

4 Read this Before Operating Your Unit - FOR THE U.S.A. AND CANADA...120V FOR YOUR SAFETY Units shipped to the U.S.A and Canada are designed for operation on 120V AC only. Safety precaution for a polarized AC plug. However, some products may be supplied with a non-polarized plug. CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. - FOR AUSTRALIA AND EUROPE...230V/240V FOR YOUR SAFETY Units shipped to Australia are designed for operation on 240V AC only. To ensure safe operation the three-pin plug supplied must be inserted only into a standard three-pin power point which is effectively earthed through the normal household wiring. Extension cords used with the equipment must be three-core and be correctly wired to provide connection to earth. Wrongly wired extension cords are a major cause of fatalities. The fact that the equipment operates satisfactorily dose not imply that the power point is earthed and that the installation is completely safe. For your safety, if in any doubt about the effective earthing of the power point, consult a qualified electrician. PAN-EUROPEAN UNIFIED VOLTAGE All units are suitable for use on supplies V AC. 2 CD-3500

5 - NOTES ON CD - In handling a disc, hold it carefully with the edges. - Do not stick paper or write anything on the printed surface. - Fingermarks and dust on the recorded surface should be carefully wiped wiped off with a soft cloth. Wipe straight from the inside to the outside of the disc. - Always keep the discs in their cases after use to protect that from dust and scratches. - To prevent warping discs, do not expose them to direct sunlight, high humidity or high temperature for an extended period of time. CD

6 Front Panel Controls CD 3500 MULTIPLE COMPACT DISC PLAYER TIMER OFF PLAY DISC SELECTOR DISC SKIP OPEN/CLOSE ON OFF POWER COMPACT DIGITAL AUDIO 5DISC AUTOMATIC DISC LOADING SYSTEM HIGH DENSITY 1-BIT D/A CONVERTER PROG RANDOM REPEAT ALL 1 DISCS TRACK INDEX INTRO PROG / REV RANDOM REPEAT TIMER DISC INTRO -SKIP-SEARCH STOP/CLEAR PLAY/PAUSE TIMER PLAY SW Before turning POWER on, locate the sw to [PLAY] then the system starts to play the 1st tray CD automatically. Locating the sw to [OFF] makes the 1st tray turn to the pick-up position and stop. 2. DISC TRAY Load a compact disc on the disc tray. 3. DISC SELECTOR Press the corresponding button when selecting tracks or disc for play or programming, then the selected is played or programmed directly without the use of the PLAY or PROG REV (PROGRAM/REVIEW) button. 4. DISC SKIP BUTTON For loading or unloading discs, press this button to rotate clockwise to the next disc position. 5. OPEN/CLOSE BUTTON Press this button to open or close the disc tray. 6. POWER BUTTON Press this button to turn the power on and press again turn the power off. 7. PROG REV BUTTON Press this button to program your favorite tracks, disc or review the programmed selection. 8. BACKWARD SKIP SEARCH ( ) BUTTON Press this button to replay from the beginning of the current track or return to a previous track. Press and hold down this button to search for a specific passage in fast backward. 4 CD-3500

7 9. RANDOM BUTTON Press this button to play tracks on CDs in random sequence. 10. FORWARD SKIP SEARCH ( ) BUTTON Press this button to move onto a next track. Press and hold down this button to search for a specific passage in fast forward. 11. REPEAT BUTTON Press this button to play a track, a disc or all discs repeatedly. 12. STOP CLEAR BUTTON ( ) Press this button to stop play, clear the programmed selections. 13. TIMER BUTTON Press this button to display the elapsed or remaining playing time of the current track or remaining playing time of the disc. 14. PLAY PAUSE ( ) BUTTON Press this button to start play in the stop or pause mode. Press this button to interrupt play temporarily and press again to restart play. 15. DISC INTRO BUTTON Press this button to play the first 10 seconds of each track on CDs. CD

8 Rear Panel Controls 1 GND DIGITAL CAUTION; TO REDUCE THE RISK OF ELE- CTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. AVIS; RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR. CAUTION; REPLACE WITH THE SAME TYPE FUSE AS INDICATED. UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE. OUTPUT MODEL NO. CD-3500 MULTIPLE COMPACT DISC PLAYER MADE IN KOREA ~ AC INPUT 230V 50Hz, 9.6W ( ) OUT L LINK R 2 1. AC INPUT INLET Plug one side of the AC cord into this inlet and plug the other side into a household AC outlet or the switched AC outlet of amplifier. 2. OUTPUT JACKS Connect these jacks to the CD (or AUX) input jacks of your amplifier. 3. DIGITAL OUT AND DIGILINK CONNECTION Upper yellow RCA jack is for digital audio out coded 44.1kHz. PCM, which can be connected to Amp or MD digital input through the male RCA jack connector. Lower green RCA jack is for the Digilink of System Control of which protocol is well known in digital audio field. 6 CD-3500

9 Multifunction Fluorescent Display PROG RANDOM REPEAT ALL 1 DISCS TRACK INDEX INTRO DISC NO. DISPLAY 2. PROGRAM INDICATOR 3. TOTAL TITLE NO. OR PLAYING MUSIC TITLE INDICATOR 4. RANDOM PLAY INDICATOR 5. REPEAT DISPLAY 6. MUSIC CALENDAR DISPLAY 7. PLAY INDICATOR 8. PAUSE INDICATOR 9. INDEX NO. DISPLAY 10. TIME INDICATOR 11. INTRO SCAN INDICATOR CD

10 Operations 1. PLAYING CDs COMPACT - Only audio compact discs bearing this mark can be played. No other discs can be played. DIGITAL AUDIO 1. Turn the power on 2. Load the disc(s) on the tray(s) with the printed side up. Stop mode - For loading a disc in the 5th tray, press the DISC SKIP button. - 8cm (3 inches) CDs can be also used on the inside circle of the tray. - a indicator appears when the number of tracks is more the Press the PLAY button to start play. - The unit plays from the first track on the FIRST disc to the final track on the 5th disc 4. Press the PLAY/PAUSE button to interrupt play temporarily. PAUSE mode - Press the PLAY/PAUSE button to restart play. 5. to stop play. PAUSE mode 8 CD-3500

11 2. REPLACING CDs DURING PLAY (PLAY EXCHANGE) - While one disc is playing, up to four discs may be exchanged. - Open tray, exchange discs as desired. 3. SKIP AND SEARCH PLAY - Selecting a disc - Press the corresponding button to start play from the desired disc. Example: When selecting the disc 4. DISC SELECTOR 4 or DISC On the remote control unit within 2 seconds 4 - The first track of selected disc will begin playing. - Selecting a track - Press these buttons momentarily and/or repeatedly until the desired track is selected. - On the remote control unit, press c or e button momentarily and repeatedly (refer to page 6). - In case of the BACKWARD SKIP button ( c button on the remote control unit), with the first press, the beginning of the current track appears and with second press, the beginning of the previous track appears. - You can select directly and play automatically the desired track using the NUMERIC buttons on the remote control unit. - Searching for a passage during play - Press and hold down these buttons until the desired passage is reached. - On the remote control unit, press and hold down d or f button (refer to page 6). 4. REPEAT PLAY - Playing a track repeatedly - Press the REPEAT 1/ALL button after selecting the desired track. Example: When selecting the track 3 of the first disc. CD

12 - Each time this button is pressed, the repeat mode changes as follows. REPEAT 1 REPEAT 1 DISC REPEAT ALL DISCS OFF - Playing a disc repeatedly - Press again after selecting the desired disc. Example: When selecting the third disc. - Playing all discs repeatedly - Press again to cancel the repeat play. 5. RANDOM PLAY - 1 disc random play - The unit automatically selects and plays tracks on the current disc in random sequence. - Each time this button is pressed, the random play mode changes as follows. 1 DISC ALL DISCS OFF The square turns clockwise until a track on the current disc is selected. - All discs random play - Press again CD-3500

13 - The unit automatically selects a disc among five discs and a track on that disc in random sequence and plays it. - After that track has been played, the unit continues to select another disc and a track on that disc in random sequence and plays it. - Press again to cancel the random play. 6. PROGRAMMED PLAY - Up to 32 selections can be programmed to play in any desired sequence. - Programming 1. In the stop mode. 2. Select the desired disc. Example: When selecting the first disc. DISC SELECTOR 1 or DISC SKIP or DISC On the remote control unit within 2 seconds 1 - If the PROGRAM/REVIEW button is pressed without selecting a track, the selected disc is programmed as a selection. 3. Select the desired track. Example: When selecting the 4th track. CD

14 4. Store the selected track in the memory. Programmed sequence Playing time * Because it is impossible to know the playing time of each selection from five discs, -- : -- can appear on the time display - When selecting a track with the NUMERIC buttons, the selected track is stored automatically without the PROGRAM/REVIEW button. 5. Repeat the steps 2, 3 and 4 to complete the desired program. 6. Start the programmed play. - During the programmed play, when you want normal play without clearing your programmed selections, select the desired disc with the DISC SELECTOR or DISC SKIP button(s) or the desired track on the current disc with the NUMERIC buttons, then the normal play will start from that disc or that track. - When you want to return to programmed play, press the PROGRAM/REVIEW button in the stop mode, then the unit switches to the program mode. - Checking the programmed selections - Each time the PROGRAM/REVIEW button is pressed in the stop mode, the programmed selections will appear in the programmed sequence. - Rectifying any wrong programmed selection - Example: When the tracks 3, 5 and 7 of the first disc are programmed and you want to store the track 7 of the third disc instead of the track 5 of the first disc. 12 CD-3500

15 1. Find the track 5 of the first disc. Rectifying and wrong programmed selection 2. Select the third disc. DISC SELECTOR 3 or DISC SKIP or DISC On the remote control unit within 2 seconds 3 3. Select the track Store the track 7. (Only when selecting the track 7 with the skip buttons.) CD

16 - Clearing the programmed selections. a. When clearing one by one - Each time this button is pressed, the programmed selections are cleared one by one in the opposite sequence. b. When clearing a specific selection - Find the desired selection and clear it. c. When clearing all programmed selections - Press and hold down this button for more than 4 seconds. 7. SELECTING A TIME DISPLAY - Each time this button is pressed, time display changes as follows. Elapsed playing time Remaining playing time of the current track Remaining playing time of the disc NOTES: - When a track of which number is greater than 30 is programmed, edited or being played, the time display may show --:--. - During random or programmed play, etc., the remaining playing time of the disc may show --: CD-3500

17 8. INTROSCAN PLAY (Remote Control only) - 1 DISC INTROSCAN PLAY - The unit plays the first 10 seconds of each track from the current disc to the 5th disc. - Each time this button is pressed, the introscan play mode changes as follows. REPEAT 1 REPEAT 1 DISC REPEAT ALL DISCS OFF - ALL DISCS INTROSCAN PLAY - Press again. - The unit plays the first 10 seconds of each first track from the current disc to the last disc. - Press again to cancel the introscan play. CD

18 Troubleshooting Guide If your unit should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or our service organization. PROBLEM POSSIBLE CAUSE REMEDY No power - The AC input cord is disconnected. - Connect the cord securely. - The POWER button is not pressed - Press the POWER button to ON. correctly. No play - The disc is loaded upside down. - Reload the disc with the printed side up. - Dirty disc. - Clean the disc. - Defective or deeply scratched disc. - Load another disc. No sound - Incorrect connections. - Make connections correctly. - Incorrect operation of the amplifier. - Operation the amplifier correctly. - The II indicator lights up. - Press the PLAY or PAUSE button to cancel the pause mode. Poor or distorted sound - The unit is connected to the - Make connections correctly. PHONO input jacks of the amplifier. - Check the connections and connect - Poor connections. all cords securely. Sound skips - Defective or deeply scratched disc. - Play another disc. - This unit is placed on a surface that - Place this unit on a stable surface. is subject to vibration or physical shock. Programming or - The disc is dirty or badly scratched. - Try again with a scratch-free disc. deleting does not - The programming or deleting - Try again. perform. procedure is not correct. - The number of the programmed or - Check the number of the deleted selections is 32. programmed or deleted selections. 16 CD-3500

19 Specifications...0dB=0.775Vrms - ELECTRICAL Frequency Response...20Hz~20kHz±0.5dB Distortion (at 1kHz)...< 0.004% S/N Ratio...> 96dB No. of Channel...2CH Output Level...Max. 2Vrms Laser Beam Pick-up...3 beam A1GaAs Semiconductor Error Mod. Method...CIRC MOD. Method D/A Conversion...Single Bit Conversion Mechanism...Full Floating System Digital Out Coaxial (75Ω)...0.5Vp-p Optical (660 ni)...-21~-15dbm - GENERAL Power Source...AC Power Consumption...12W Weight...7.1kg/15.6lb Dimensions...482(W) 132(H) 380(D)mm 19(W)x5.2(H)x15.3(D)in * Specifications and design subject to change without notice for improvements. CD