itexamdump 최고이자최신인 IT 인증시험덤프 일년무료업데이트서비스제공

Transcription

1 itexamdump 최고이자최신인 IT 인증시험덤프 일년무료업데이트서비스제공

2 Exam : JN0-694 Title : Enterprise Routing and Switching Support, Professional (JNCSP-ENT) Vendor : Juniper Version : DEMO Get Latest & Valid JN0-694 Exam's Question and Answers 1 from Itexamdump.com. 1

3 NO.1 -- Exhibit - (MSTI 2 regional root: c:6b:f5:3e:f8:01) {master:0 user@switch> show spanning-tree interface Spanning tree interface parameters for instance 0 Interface Port ID Designated Designated Port State Role port ID bridge ID Cost ge-0/0/ : : fbc BLK ALT ge-0/0/ : : c6bf591a FWD DESG ge-0/0/ : : fbe FWD ROOT ge-0/0/ : : c6bf53ef BLK ALT [...] -- Exhibit -- While troubleshooting an MSTP operation in your network, you see the output shown in the exhibit on one of your switches. You know that the MSTI 2 regional root bridge ID is c:6b:f5:3e:f8:01. Which port is attached to the root bridge of MSTI 2? A. ge-0/0/6 B. ge-0/0/9 C. ge-0/0/10 D. ge-0/0/12 Answer: D NO.2 -- Exhibit -user@router> show ospf database Area Type ID Adv Rtr Seq Age Opt Cksum Len Router x800000d x22 0x59f3 36 Router x800000d x22 0x57f2 36 Router * x800000dc 176 0x22 0x75fa 72 Network x x22 0x Summary x x22 0x3f62 28 Summary x x22 0xdeb9 28 Summary x800000cb x22 0x2bbb 28 Summary x800000cc 487 0x22 0x19ca 28 Summary x x22 0xb2f9 28 OSPF AS SCOPE link state database Type ID Adv Rtr Seq Age Opt Cksum Len Extern * x x22 0x Extern * x x22 0xfc88 36 user@router> show ospf neighbor Address Interface State ID Pri Dead ge-0/0/1.0 Full ge-0/0/1.0 Full user@router> show ospf interface ge-0/0/1.0 extensive Interface State Area DR ID BDR ID Nbrs ge- 0/0/1.0 PtToPt Type: P2MP, Address: , Mask: , MTU: 1500, Cost: 1 Adj count: 2 Hello: 10, DeaD. 40, ReXmit: 5, Not Stub Auth type: None Protection type: None Topology default (ID 0) -> Cost: 1 user@router> show route protocol ospf table inet.0 inet.0: destinations, routes (11133 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both /32 *[OSPF/10] 1w0d 00:01:14, metric 1 MultiRecv -- Exhibit - Referring to the exhibit, why are the OSPF routes missing from the routing table for this router? Get Latest & Valid JN0-694 Exam's Question and Answers 2 from Itexamdump.com. 2

4 A. mismatching OSPF interface type with the neighbor B. MTU mismatch with the neighbor C. incorrect IP address configured on the interface D. no Type 4 LSAs in the OSPF database Answer: A NO.3 -- Exhibit -user@router# show class-of-service classifiers { inet-precedence ipp-test { import default; forwarding-class best-effort { loss-priority low code-points be; forwarding-class expedited-forwarding { loss-priority low code-points af21; forwarding-class assured-forwarding { loss-priority low code-points af11; forwarding-class network-control { loss-priority low code-points nc1; interfaces { ge-* { scheduler-map map-test; unit * { classifiers { inet-precedence ipp-test; rewrite-rules { inet-precedence ipp-rw-test; inet-precedence default;... rewrite-rules { inet-precedence ipp-rw-test { forwarding-class best-effort { loss-priority low code-point be; loss-priority high code-point af21; forwarding-class expedited-forwarding { Get Latest & Valid JN0-694 Exam's Question and Answers 3 from Itexamdump.com. 3

5 loss-priority high code-point af21; loss-priority low code-point be; forwarding-class assured-forwarding { loss-priority low code-point af11; loss-priority high code-point af11; forwarding-class network-control { loss-priority low code-point nc1; loss-priority high code-point nc1; user@router> show class-of-service... Code point type: inet-precedence Alias Bit pattern af af af af be 000 cs6 110 cs7 111 ef 101 nc1 110 nc Exhibit - Traffic with the IP precedence value af21 ingresses the router and should be rewritten with the same value as it egresses; however, this traffic is rewritten to a different value. Referring to the exhibit, what is the source of this problem? A. The BA classifier is assigning the traffic to the best-effort queue with a high loss priority. B. The BA classifier is assigning the traffic to the best-effort queue with a low loss priority. C. The BA classifier is assigning the traffic to the expedited forwarding queue with a high loss priority. D. The BA classifier is assigning the traffic to the expedited forwarding queue with a low loss priority. Answer: D NO.4 An end user on interface ge-0/0/1.0 is trying to receive a multicast stream for sourced from but is not receiving it. You use the show igmp group command and do not see this group in the list. You enable traceoptions for IGMP and find the following IGMPv3 report from the end user's host: Jun 10 13:11: RCV IGMP V3 Report len 16 from intf ge-0/0/1.0 Jun 10 13:11: Records 1 Jun 10 13:11: Group , type IS_EX, aux_len 0, sources 0 Which configuration change is required to allow the group to be added in the router? A. set routing-options multicast ssm-groups /32 B. set routing-options multicast asm-override-ssm C. set protocols igmp interface ge-0/0/1.0 promiscuous-mode D. set protocols igmp interface ge-0/0/1.0 group-limit 2 Answer: B NO.5 -- Exhibit -- user@switch# show vlans ws { vlan-id 23; interface { ge-0/0/12.0; ge-0/0/6.0; dot1q-tunneling; no-mac-learning; -- Exhibit - Get Latest & Valid JN0-694 Exam's Question and Answers 4 from Itexamdump.com. 4

6 Referring to the exhibit, an administrator notices that all traffic is flooded out of all the ports in VLAN ws. What would cause this problem? A. no-mac-learning is enabled on the interface. B. Spanning tree is disabled. C. dot1q-tunneling is enabled on the VLAN. D. Unicast destinations are flooded out of all ports. Answer: A Get Latest & Valid JN0-694 Exam's Question and Answers 5 from Itexamdump.com. 5