ARIB STD-T64-C.R1001-D v1.0. Administration of Parameter Value Assignments for cdma2000 Spread Spectrum Standards, Release D

Transcription

1 ARIB STD-T-C.R00-D v.0 Administration of Parameter Value Assignments for cdma000 Spread Spectrum Standards, Release D Refer to "Industrial Property Rights (IPR)" in the preface of ARIB STD-T for Related Industrial Property Rights. Refer to "Notice" in the preface of ARIB STD-T for Copyrights

2 Original Specification This standard, ARIB STD-T-C.R00-D v.0, was prepared by GPP-WG of Association of Radio Industries and Businesses (ARIB) based upon the GPP specification, C.R00-D v.0. Modification to the original specification None. 8 9 Notes None. 0

3 GPP C.R00-D Version.0 Date: April 8, 00 Administration of Parameter Value Assignments for cdma000 Spread Spectrum Standards Release D COPYRIGHT GPP and its Organizational Partners claim copyright in this document and individual Organizational Partners may copyright and issue documents or standards publications in individual Organizational Partner s name based on this document. Requests for reproduction of this document should be directed to the GPP Secretariat at secretariat@gpp.org. Requests to reproduce individual Organizational Partner s documents should be directed to that Organizational Partner. See for more information.

4 Revision History Revision Description Date C.R00-0 Release 0 December, 999 C.R00-A.0 Release A February, 000 C.R00-A.0 Release A point release July, 000 C.R00-B.0 Release B February, 00 C.R00-B.0 Release B point release May, 00 C.R00-C SDO review version November 8, 00 C.R00-C.0 Release C publication version January, 00 C.R00-D SDO review version September 9, 00 C.R00-D.0 Release D publication version April 8, GPP.

5 GPP C.R00-D CONTENTS INTRODUCTION... - ADMINISTRATION OF PARAMETER VALUE ASSIGNMENTS Request for Parameter Value Assignments Selection of Parameter Value Assignments Use of Proprietary Parameter Value Assignments Inquiries...- SERVICE OPTION NUMBER ASSIGNMENTS Standard Service Option Number Assignments Proprietary Service Option Number Assignments Service Option Group Assignments... - DATA BURST MESSAGE BURST TYPE ASSIGNMENTS Standard Data Burst Message Burst Type Assignments Proprietary Data Burst Message Burst Type Assignments... - MULTIPLEX OPTION NUMBER ASSIGNMENTS Standard Multiplex Option Number Assignments Proprietary Multiplex Option Number Assignments... - BAND CLASS VALUE ASSIGNMENTS Band Class Value Assignments... - MANUFACTURER-SPECIFIC OTASP ASSIGNMENTS Reverse Link Message Type Assignments Result Code Assignments Feature Identifier Assignments Reverse Link NAM Parameter Block Type Assignments Reverse Link SSPR Parameter Block Type Assignments Reverse Link PUZL Parameter Block Type Assignments Reverse Link GPD Parameter Block Type Assignments Forward Link Message Type Assignments Forward Link NAM Parameter Block Type Assignments Forward Link SSPR Parameter Block Type Assignments Forward Link Validation Parameter Block Type Assignments Forward Link PUZL Parameter Block Type Assignments Forward Link GPD Parameter Block Type Assignments... - i

6 GPP C.R00-D ROAMING DISPLAY INDICATOR ASSIGNMENTS Standard Enhanced Roaming Indicator Number Assignments Non-Standard Enhanced Roaming Indicator Number Assignments SHORT MESSAGE SERVICES ASSIGNMENTS Data Field Encoding Assignments Language Indicator Value Assignments Service Category Assignments Standard Service Category Assignments Proprietary Service Category Assignments ANALOG FAX ASSIGNMENTS PROTOCOL AND APPLICATION ASSIGNMENTS Protocol Type and Protocol Subtype Assignments Application Subtype Assignments... - MANUFACTURER-SPECIFIC POSITION LOCATION ASSIGNMENTS Reverse Link Message Type Assignments Forward Link Message Type Assignments FIGURES Figure - Service Option Number Format TABLES Table.-. Standard Service Option Number Assignments (part of )... - Table.-. Standard Service Option Number Assignments (part of )... - Table.-. Standard Service Option Number Assignments (part of )... - Table.-. Proprietary Service Option Number Assignments... - Table.-. Service Option Group Assignments (part of )... - Table.-. Service Option Group Assignments (part of ) Table.-. Standard Data Burst Message Burst Type Assignments... - Table.-. Proprietary Data Burst Message Extended Burst Type Assignments... - Table.-. Band Class Value Assignments... - Table -. Manufacturer-specific OTASP Assignments... - Table.-. Proprietary Assignments of Reverse Link Message Type... - Table.-. Proprietary Assignments of Result Code... - ii

7 GPP C.R00-D Table.-. Proprietary Assignments of Feature Identifier... - Table.-. Proprietary Assignments of Reverse Link NAM Parameter Block Types... - Table.8-. Proprietary Assignments of Forward Link Message Type... - Table.9-. Proprietary Assignments of Forward Link NAM Parameter Block Types... - Table 8.-. Enhanced Roaming Indicator Number Assignments Table 9.-. Data Field Encoding Assignments Table 9.-. Language Indicator Value Assignments Table Standard Service Categories (Part of ) Table Standard Service Categories (Part of ) Table Proprietary Service Category Assignments Table 0-. Analog Fax Inter-working Function Manufacturer Code Assignments Table.-. Protocol Type and Protocol Subtype Assignments (part of )... - Table.-. Protocol Type and Protocol Subtype Assignments (part of )... - Table.-. Application Subtype Assignments... - Table -. Manufacturer-specific Position Location Assignments... - Table.-. Proprietary Assignments of Reverse Link Message Type... - Table.-. Proprietary Assignments of Forward Link Message Type iii

8 GPP C.R00-D REFERENCES The following standards are referenced in this text. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based upon this document are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. ANSI and TIA maintain registers of currently valid national standards published by them.. Reserved.. GPP C.S000-C, Physical Layer Standard for cdma000 Spread Spectrum Systems, May 00.. GPP C.S000-C, Medium Access Control (MAC) Standard for cdma000 Spread Spectrum Systems, May 00.. Reserved.. GPP C.S000-C, Upper Layer (Layer ) Signaling Standard for cdma000 Spread Spectrum Systems, May 00.. Reserved.. GPP C.S0008-0, Multi-Carrier Specification for Spread Spectrum Systems on GSM MAP (MC-MAP), June GPP C.S0009-0, Speech Service Option Standard for Wideband Spread Spectrum System, December GPP C.S00-A, Mobile Station Loopback Service Options Standard, March GPP C.S00-0, Enhanced Variable Rate Codec, Speech Service Option for Wideband Spread Spectrum Digital Cellular System, December GPP C.S00-A, Short Message Services for Wideband Spread Spectrum Systems, January 00.. GPP C.S00-B, Over-the-Air Service Provisioning of Mobile Stations in Wideband Spread Spectrum Systems, October 00.. GPP C.S00-0 v.0, Data Services Standard for Wideband Spread Spectrum Systems, December GPP C.S00-0 v.0, Data Services Standard for Wideband Spread Spectrum Systems Addendum, December GPP C.S00-0 v.0, Data Services Standard for Wideband Spread Spectrum Systems Addendum, August GPP C.S000-0, High Rate Speech Service Option for Wideband Spread Spectrum Communication Systems, December GPP C.S00-0, Position Determination Service Standard for Dual Mode Spread Spectrum Systems, December GPP C.S00-0, Test Data Service Option (TDSO) for cdma000 Spread Spectrum Systems, March 00. iv

9 GPP C.R00-D GPP C.S00-0, Markov Service Option (MSO) for cdma000 Spread Spectrum Systems, March GPP N.S000, Cellular Radiotelecommunications Intersystem Operations, December TIA/EIA/IS-9-A, Base Station Mobile Station Compatibility Specification for 800 MHz Cellular, Auxiliary, and Residential Services, November Reserved.. Reserved.. Reserved.. ANSI X., Information Systems Coded Character Sets -Bit American National Standard Code, 98.. ARIB STD-T Ver., CDMA Cellular System, October 00.. ISO 889-, Information Technology 8-Bit Single-Byte Coded Graphic Character Sets Part. Latin Alphabet No., ISO 889-8, Information Technology 8-Bit Single-Byte Coded Graphic Character Sets, ISO/IEC 0-, Information Technology Universal Multiple-Octet Coded Character Set (UCS) Part : Architecture and Basic Multilingual Plane, JIS X00, Code for Information Interchange, 9.. ITU-T T.0, International Reference Alphabet (IRA) (Formerly International Alphabet No. or IA) Information Technology -Bit Coded Character Set for Information Interchange, 99.. TTA.KO-00.00, Air Interface between Personal Station-Base Station Radio Interface Standard for. to.9ghz CDMA PCS, July 99.. KS X 00, The coded character set for information interchange Korean and Chinese character, GPP C.S00-0 v.0, cdma000 High Rate Packet Data Air Interface Specification, October 00.. GPP C.S009-0 v.0, Test Application Specification (TAS) for High Rate Packet Data Air Interface, July 00.. GPP C.S000-0 v.0, Selectable Mode Vocoder Service Option for Wideband Spread Spectrum Communication Systems, December 00.. GPP TS.090, Alphabets and language-specific information. 8. Reserved. 9. GPP A.S000, Inter-Operability Specification (IOS) for High Rate Packet Data (HRPD) Access Network Interfaces, November GPP C.S00-0 v.0, Link-Layer Assisted Service Options for Voice-over-IP: Header Removal (SO 0) and Robust Header Compression (SO ), April 00. v

10 GPP C.R00-D No text. vi

11 GPP C.R00-D INTRODUCTION The cdma000 family of standards specify the operating and performance characteristics of cdma000 digital spread spectrum systems. These standards contain certain parameter values (e.g., service options and Data Burst Message burst types) that have been reserved for either standard or for proprietary (non-standard) usage. As new voice and non-voice- related services are defined, it is necessary to assign values to these parameters. To avoid confusion resulting from multiple assignments, GPP Technical Specification Group C (TSG-C) recognized the need to provide this single master registry of parameter values that it has authorized for use. This document assigns values to parameters within certain cdma000 specifications for standard and for proprietary usage. The affected standards are listed in the References section of this document. As assignments are identified, this document will be revised to accommodate the new parameter assignments. Manufacturers, service providers, and others wishing to use values for parameters that have not been assigned should refer to Section of this document for parameter value assignment administration procedures. Services using proprietary parameter value assignments are not subject to standardization within TSG-C, but shall be interoperable with the requirements within the respective cdma000 specifications. In addition to the parameter values assigned in this document, TSG-C may assign parameter values to new services or to certain organizations according to the procedures described in Section. Parameter values that are not assigned in this document or that are not assigned according to the procedures in Section are undefined; and, therefore, have not been approved by TSG-C. Organizations should not use unassigned parameter values, and are cautioned that use of unassigned parameter values may affect future compatibility. The terms Manufacturer-Specific and Proprietary are used interchangeably, as are the terms Standard and Specification. This document may contain provisional value assignments for specifications under development. These specifications may not be approved by the date of publication of this document. NOTE: cdma000 is a registered trademark of the Telecommunications Industry Association (TIA USA). -

12 GPP C.R00-D No text. -

13 GPP C.R00-D ADMINISTRATION OF PARAMETER VALUE ASSIGNMENTS Assignment of parameter values shall be governed by the administrative procedures contained in this section.. Request for Parameter Value Assignments Requests for one or more parameter value assignments may be made by any GPP Technical Specification Group, as well as by individual manufacturers, service providers, and others. This includes requests for assignments within existing sections of this document, as well as requests for the inclusion of new parameters as the need arises. External requests must be made by way of written correspondence to the GPP Secretariat (see.). Upon receipt of a request, TSG-C will discuss the matter; upon approval, if granted, the TSG will designate a new parameter value assignment and, if necessary, will designate an appropriate new section within this document. This assignment will be considered as an addendum to this document and will be added to the next published revision. TSG-C will decide the appropriate time for releasing an update of this document. If requested in a correspondence to the GPP Secretariat, the requester will be notified of the TSG-C decision on a proprietary parameter value assignment request prior to publication.. Selection of Parameter Value Assignments The selection of any parameter value assignments will be at the sole discretion of TSG-C. Where the requester has a need for a specific parameter value assignment, such a request shall be included in the written correspondence to the GPP Secretariat, and the request will be considered by the TSG during its discussions.. Use of Proprietary Parameter Value Assignments Use of all proprietary parameter value assignments is subject to the restrictions of this section. Organizations that have been assigned proprietary parameter value assignments may use them to designate proprietary services, features, or options without further notification to GPP or TSG-C. Such services, features, or options shall conform to all applicable requirements of the cdma000 specifications. Any organization wishing to use a parameter value assignment that has been designated to another organization (the assignee ) shall obtain permission to use the parameter value assignment from the assignee and shall conform to all requirements imposed by the assignee regarding the corresponding parameter value assignment. In this case, the organization requesting use of the assignee s parameter value assignment shall also conform to all applicable requirements of the cdma000 specifications. A parameter value assignment that has been in proprietary use may, at the request of an assignee, be incorporated into a cdma000 specification. At that time, GPP TSG-C may assign the parameter a new, non-proprietary value or may use the assignee s related -

14 GPP C.R00-D parameter value assignment. If the assignee s parameter value assignment is used, then permission from the assignee for its use shall no longer be required. When a parameter value assignment is no longer needed for proprietary use, the assignee should notify the GPP Secretariat through written correspondence.. Inquiries All inquiries and requests regarding this document should be addressed via to the GPP Secretariat at secretariat@gpp.org. In the event communication is unavailable or deemed undesirable, printed correspondence may be addressed to the GPP Secretariat as follows: GPP Secretariat c/o Telecommunications Industry Association 00 Wilson Boulevard Suite 00 Arlington, Virginia 0 -

15 GPP C.R00-D SERVICE OPTION NUMBER ASSIGNMENTS The cdma000 specifications support the concept of service options on both the control and on the traffic channels. Service options allow various voice and non-voice services to be defined and to be specified independently within the confines of the physical layer and the multiplex sub-layer interface. Each service option is identified by a unique service option number to facilitate proper processing within the network and mobile stations. Service option numbers may be used for standard services, as well as for proprietary (nonstandard) services. A service option number may indicate a service option revision. For this interpretation, the -bit service option number is composed of three fields: the Proprietary Indicator field, the Service Option Revision field, and the Base Service Option Number field, as shown in Figure -. Proprietary Indicator Service Option Service Option Revision Base Service Option Number bit bits bits 8 9 Figure - Service Option Number Format. Standard Service Option Number Assignments The Proprietary Indicator of standard service option numbers is set to 0. Table.- shows the service option number assignments that have been made and approved as of the date of this publication. It also identifies the service option group for each service option that has been assigned to a service option group. 0 -

16 GPP C.R00-D Table.-. Standard Service Option Number Assignments (part of ) Service Option Number (Decimal) Service Option Group (Decimal) Designated Use/Type of Service Associated Standard 0 Basic Variable Rate Voice Service (8 kbps) [8] None Mobile Station Loopback (8 kbps) [9] 0 Enhanced Variable Rate Voice Service (8 kbps) [0] Asynchronous Data Service (9. kbps) [] Group Facsimile (9. kbps) [] Short Message Services (Rate Set ) [] Packet Data Service: Internet or ISO Protocol Stack (9. kbps) 8 Packet Data Service: CDPD Protocol Stack (9. kbps) [] [] 9 None Mobile Station Loopback ( kbps) [9] 0 None STU-III Transparent Service [] None STU-III Non-Transparent Service [] Asynchronous Data Service (. or 9. kbps) [] Group Facsimile (. or 9. kbps) [] Short Message Services (Rate Set ) [] Packet Data Service: Internet or ISO Protocol Stack (. kbps) Packet Data Service: CDPD Protocol Stack (. kbps) [] [] 0 High Rate Voice Service ( kbps) [] 8 Over-the-Air Parameter Administration (Rate Set ) [] 9 Over-the-Air Parameter Administration (Rate Set ) [] 0 Group Analog Facsimile (Rate Set ) [] Group Analog Facsimile (Rate Set ) [] High Speed Packet Data Service: Internet or ISO Protocol Stack (RS forward, RS reverse) High Speed Packet Data Service: Internet or ISO Protocol Stack (RS forward, RS reverse) [] [] -

17 GPP C.R00-D Table.-. Standard Service Option Number Assignments (part of ) Service Option Number (Decimal) Service Option Group (Decimal) Designated Use/Type of Service Associated Standard High Speed Packet Data Service: Internet or ISO Protocol Stack (RS forward, RS reverse) High Speed Packet Data Service: Internet or ISO Protocol Stack (RS forward, RS reverse) High Speed Packet Data Service: CDPD Protocol Stack (RS forward, RS reverse) High Speed Packet Data Service: CDPD Protocol Stack (RS forward, RS reverse) 8 High Speed Packet Data Service: CDPD Protocol Stack (RS forward, RS reverse) 9 High Speed Packet Data Service: CDPD Protocol Stack (RS forward, RS reverse) 0 None Supplemental Channel Loopback Test for Rate Set None Supplemental Channel Loopback Test for Rate Set [] [] [] [] [] [] [9] [9] None Test Data Service Option (TDSO) [8] cdma000 High Speed Packet Data Service, Internet or ISO Protocol Stack cdma000 High Speed Packet Data Service, CDPD Protocol Stack [], [] [] 8 Location Services, Rate Set (9. kbps) [] 8 Location Services, Rate Set (. kbps) [] None ISDN Interworking Service ( kbps) [] 8 None GSM Voice [] 9 None GSM Circuit Data [] 0 None GSM Packet Data [] None GSM Short Message Service [] None Reserved for MC-MAP standard service options [] None Markov Service Option (MSO) [9] None Loopback Service Option (LSO) [9] 0 Selectable Mode Vocoder [] -

18 GPP C.R00-D Table.-. Standard Service Option Number Assignments (part of ) Service Option Number (Decimal) Service Option Group (Decimal) Designated Use/Type of Service Associated Standard None kbps Circuit Video Conferencing [8] None kbps Circuit Video Conferencing [8] 8 None kbps Circuit Video Conferencing [8] 9 None HRPD Accounting Records Identifier [9] 0 None Link Layer Assisted Robust Header Compression (LLA ROHC) Header Removal None Link Layer Assisted Robust Header Compression (LLA ROHC) Header Compression [0] [0] 099 None Reserved for standard service options. None 00 Asynchronous Data Service, Revision (9. or. kbps) 0 Group Facsimile, Revision (9. or. kbps) [] [] 0 None Reserved for standard service option. None 0 Packet Data Service: Internet or ISO Protocol Stack, Revision (9. or. kbps) 0 Packet Data Service: CDPD Protocol Stack, Revision (9. or. kbps) [] [] 0, None Reserved for standard service options. None This service option assignment made for identification defined in the Radio Access Network is not carried over the air interface. -

19 GPP C.R00-D. Proprietary Service Option Number Assignments The Proprietary Indicator of proprietary service option numbers is set to. Table.- shows the proprietary service option number assignments made and approved as of the date of this publication. An x represents either a zero or a one. Table.-. Proprietary Service Option Number Assignments Organization Service Option Number (Decimal) Service Option Number (Binary) QUALCOMM Incorporated,8, xx OKI telecom,, xx Lucent Technologies,, xx Nokia,80, xx NORTEL NETWORKS,8, xx Sony Electronics Inc.,88, xx Motorola,9, xx QUALCOMM Incorporated,9, xx QUALCOMM Incorporated,800, xx QUALCOMM Incorporated,80, xx QUALCOMM Incorporated,808, xx Lucent Technologies,8, xx Denso International,8, xx Motorola,80, xx Denso International,8, xx Denso International,88, xx Denso International,8, xx NEC America,8, xx Samsung Electronics,80, xx Texas Instruments Incorporated,8, xx Toshiba Corporation,88, xx LG Electronics Inc.,8, xx VIA Telecom Inc.,8, xx Reserved,80, through -

20 GPP C.R00-D Service Option Group Assignments A service option group is a bit map that identifies a logically related set of service options. The bit map may contain, 8, or bits, depending upon the number of logically related service options in the group. Each bit in the bit map corresponds to one service option. A mobile station or a base station indicates that it supports a service option in the group by setting the bit corresponding to the service option to. A mobile station or base station can also indicate that it does not support a service option by setting the bit to 0. All reserved bits are set to 0. Table.- shows the service option group numbers that have been made and approved as of the date of this publication. The most significant bit of the service option group map is on the left, and the least significant bit is on the right. -

21 GPP C.R00-D Table.-. Service Option Group Assignments (part of ) Service Option Group (Decimal) Type of Services in the Group Service Option Group Bit Map and Associated Service Option Assignments 0 Voice Services x - - x - - x - - x SO SO SO SO Low Speed Async Data Services x - - x - - x - - x Digital Facsimile Services x - - x - - x - - x Analog Facsimile Services x - - x - - x - - x Non-CDPD Packet Data Services x x x x x x x x CDPD Packet Data Services x x x x x x x x SO SO SO 00 Reserved SO SO SO 0 Reserved SO 0 SO Reserved Reserved SO SO SO 0 SO SO SO SO SO SO 8 SO SO 0 SO SO SO 8 SO 9 SO -

22 GPP C.R00-D Table.-. Service Option Group Assignments (part of ) Service Option Group (Decimal) Type of Services in the Group SMS Services x - - x - - x - - x OTAPA Services x - - x - - x - - x Location Services x - - x - - x - - x Reserved Reserved for future extension Service Option Group Bit Map and Associated Service Option Assignments SO SO Reserved Reserved SO 8 SO 9 Reserved Reserved SO SO Reserved Reserved -8

23 GPP C.R00-D No Text. -9

24

25 GPP C.R00-D DATA BURST MESSAGE BURST TYPE ASSIGNMENTS The cdma000 specifications support the use of Data Burst Messages on both the control channel and the traffic channel. Data Burst Messages can be sent by mobile stations over either the Reverse Control Channel or the Reverse Dedicated Channel, and can be sent by base stations over either the Forward Control Channel or the Forward Dedicated Channel. The burst types (values of the BURST_TYPE field) for mobile-station-originated and basestation-originated Data Burst Messages are defined in this section. With the addition of other service options (e.g., asynchronous data and Group- fax) to the basic voice service, the use of the Data Burst Message is being defined to support specific service options. Data Burst Messages may be used for standard services, as well as for proprietary (non-standard) services. Thus, the need arises to distinguish the data burst types associated with individual service options, especially when multiple service options are allowed to be active simultaneously.. Standard Data Burst Message Burst Type Assignments Table.- shows the standard burst type assignments made and approved as of the date of this publication. 8 Table.-. Standard Data Burst Message Burst Type Assignments Burst Type (Binary) Designated Use/Type of Service Associated Standards Unknown burst type [] Asynchronous Data Services [] Group- Facsimile [] 0000 Short Message Services [] Over-the-Air Service Provisioning [] 0000 Position Determination Services [] 0000 Short Data Bursts [] Reserved Not applicable 0 Extended Burst Type International See Below Extended Burst Type See Below 9 0 -

26 GPP C.R00-D Burst type 0 indicates that an Extended Burst Type International is contained in the first two octets of the CHARi field of the Data Burst Message. The first ten bits of Extended Burst Type International contain a binary mapping of the Mobile Country Code (MCC) associated with the national standards organization administering the use of the remaining octets of the message. Encoding of the MCC shall be as specified in... of []. The remaining six bits of the Extended Burst Type International shall specify the country-specific burst type. Burst type indicates that an extended burst type is contained in the first two octets of the CHARi field of the Data Burst Message. Table.- shows the standard extended burst type assignments (assigned values of the first two octets of the CHARi field) made and approved as of the date of this publication. Table.-. Standard Data Burst Message Extended Burst Type Assignments Extended Burst Type (Binary) Designated Use/Type of Service Associated Standards Reserved for standard data burst types. [] Reserved for proprietary data burst types. [] 8. Proprietary Data Burst Message Burst Type Assignments All proprietary Data Burst Message burst types are assigned as extended burst types. Table.- shows the proprietary extended burst type assignments that were made and approved as of the date of this publication. An x represents either a zero or a one. 9 0 Table.-. Proprietary Data Burst Message Extended Burst Type Assignments Motorola Organization QUALCOMM Incorporated Extended Burst Type (Binary) xxxx xx Reserved xx -

27 GPP C.R00-D MULTIPLEX OPTION NUMBER ASSIGNMENTS The cdma000 specifications allow the multiplex sublayer to be tailored so as to provide special capabilities. The multiplex sublayer is one of the conceptual layers of the system, which multiplexes and demultiplexes traffic from different service option instances and signaling traffic. Each multiplex option, designated by a multiplex option number, defines the specific frame format for a particular set of capabilities.. Standard Multiplex Option Number Assignments Refer to [] for Multiplex Option Number Assignments.. Proprietary Multiplex Option Number Assignments No proprietary multiplex option numbers have been assigned as of the date of release of this document. -

28 GPP C.R00-D No text. -

29 GPP C.R00-D BAND CLASS VALUE ASSIGNMENTS The cdma000 specifications use values of the band class parameter to designate CDMA frequency bands.. Band Class Value Assignments Table.- shows the band class value assignments (assigned values of the BAND_CLASS field) that were made and approved as of the date of this publication. 8 Table.-. Band Class Value Assignments Band Class Value (Binary) Frequency Band Associated Standards MHz Cellular System [] to.990 GHz Broadband PCS [] to 90 MHz TACS Band [] to 9 MHz JTACS Band [] to.80 GHz Korean PCS [] MHz NMT [] 000 GHz IMT-000 Band [] 00 North American 00 MHz Cellular Band [] to.880 GHz PCS [] to 90 MHz Band [] 000 Secondary 800 MHz Band [] MHz European PAMR Band [] MHz European PAMR Band [] 00 Reserved None 9 0 -

30 GPP C.R00-D No text. -

31 GPP C.R00-D MANUFACTURER-SPECIFIC OTASP ASSIGNMENTS [] reserves specific ranges of values for manufacturer-specific Over-the-Air Service Provisioning (OTASP) assignments. Values in specified ranges are reserved as shown in Table -. Specific assignments are given in sections. through.9. -

32 GPP C.R00-D Table -. Manufacturer-specific OTASP Assignments OTASP Value Reserved Manufacturer- Specific Range Reference in [] Reverse Link Message Types (OTASP_MSG_TYPE) Result Codes (RESULT_CODE) Feature Identifier (FEATURE_ID) Reverse Link NAM Parameter Block Types (BLOCK_ID) Reverse Link SSPR Parameter Block Types (BLOCK_ID) Reverse Link PUZL Parameter Block Types (BLOCK_ID) Reverse Link GPD Parameter Block Types (BLOCK_ID) Forward Link Message Types (OTASP_MSG_TYPE) Forward Link NAM Parameter Block Types (BLOCK_ID) Forward Link SSPR Parameter Block Types (BLOCK_ID) Forward Link Validation Parameter Block Types (BLOCK_ID) Forward Link PUZL Parameter Block Types (BLOCK_ID) Forward Link GPD Parameter Block Types (BLOCK_ID) Reverse Link Message Type Assignments Table.- shows the proprietary assignments of Reverse Link Message Type. These assignments were made and approved as of the date of this publication. All block type values in the table are binary. An x represents either a zero or a one. -

33 GPP C.R00-D Table.-. Proprietary Assignments of Reverse Link Message Type Organization Block Type (Binary) Verizon Wireless Reserved Result Code Assignments Table.- shows the proprietary assignments of Result Code. These assignments were made and approved as of the date of this publication. All block type values in the table are binary. An x represents either a zero or a one. 8 Table.-. Proprietary Assignments of Result Code Organization Block Type (Binary) QUALCOMM Incorporated xx Reserved Feature Identifier Assignments Table.- shows the proprietary assignments of Feature Identifier. These assignments were made and approved as of the date of this publication. All block type values in the table are binary. An x represents either a zero or a one. Table.-. Proprietary Assignments of Feature Identifier Organization Block Type (Binary) QUALCOMM Incorporated 00 00xx Verizon Wireless 00 00x Reserved Reverse Link NAM Parameter Block Type Assignments Table.- shows the proprietary assignments of Reverse Link NAM Parameter Block Type. These assignments were made and approved as of the date of this publication. All block type values in the table are binary. An x represents either a zero or a one. -

34 GPP C.R00-D Table.-. Proprietary Assignments of Reverse Link NAM Parameter Block Types Organization Block Type (Binary) QUALCOMM Incorporated xx Reserved Reverse Link SSPR Parameter Block Type Assignments No manufacturer-specific Reverse Link SSPR Parameter Block Type (BLOCK_ID) values have been assigned as of the date of release of this document.. Reverse Link PUZL Parameter Block Type Assignments No manufacturer-specific Reverse Link PUZL Parameter Block Type (BLOCK_ID) values have been assigned as of the date of release of this document.. Reverse Link GPD Parameter Block Type Assignments No manufacturer-specific Reverse Link GPD Parameter Block Type (BLOCK_ID) values have been assigned as of the date of release of this document..8 Forward Link Message Type Assignments Table.8- shows the proprietary assignments of Forward Link Message Type. These assignments were made and approved as of the date of this publication. All block type values in the table are binary. An x represents either a zero or a one. Table.8-. Proprietary Assignments of Forward Link Message Type Organization Block Type (Binary) Verizon Wireless Reserved Forward Link NAM Parameter Block Type Assignments Table.- shows the proprietary assignments of Forward Link NAM Parameter Block Type. These assignments were made and approved as of the date of this publication. All block type values in the table are binary. An x represents either a zero or a one. -

35 GPP C.R00-D Table.9-. Proprietary Assignments of Forward Link NAM Parameter Block Types Organization Block Type (Binary) QUALCOMM Incorporated xx Reserved Forward Link SSPR Parameter Block Type Assignments No manufacturer-specific Forward Link SSPR Parameter Block Type (BLOCK_ID) values have been assigned as of the date of release of this document.. Forward Link Validation Parameter Block Type Assignments No manufacturer-specific Forward Link Validation Parameter Block Type (BLOCK_ID) values have been assigned as of the date of release of this document.. Forward Link PUZL Parameter Block Type Assignments No manufacturer-specific Forward Link PUZL Parameter Block Type (BLOCK_ID) values have been assigned as of the date of release of this document.. Forward Link GPD Parameter Block Type Assignments No manufacturer-specific Forward Link GPD Parameter Block Type (BLOCK_ID) values have been assigned as of the date of release of this document. -

36 GPP C.R00-D No text. -

37 GPP C.R00-D ROAMING DISPLAY INDICATOR ASSIGNMENTS The cdma000 specifications support the concept of roaming display indicator on the control channels. Roaming display indicator allows the network to indicate to the subscriber the roaming condition of the mobile station. Each roaming display indicator is identified by a unique roaming display number to facilitate proper processing within the network and mobile stations. Roaming display numbers may be used for standard services as well as for non-standard services. 8. Standard Enhanced Roaming Indicator Number Assignments Table 8.- shows the standard enhanced roaming indicator number assignments made and approved as of the date of this publication. 8. Non-Standard Enhanced Roaming Indicator Number Assignments No manufacturer-specific Non-Standard Enhanced Roaming Indicator values have been assigned as of the date of release of this document. 8-

38 GPP C.R00-D Table 8.-. Enhanced Roaming Indicator Number Assignments Roaming Display Number (Binary) Roaming Display Indication Roaming Indicator On Roaming Indicator Off Roaming Indicator Flashing Out of Neighborhood Out of Building Roaming - Preferred System Roaming - Available System Roaming - Alliance Partner Roaming - Premium Partner Roaming - Full Service Functionality Roaming - Partial Service Functionality Roaming Banner On Roaming Banner Off through through through Reserved for Standard Enhanced Roaming Indicator Numbers Reserved for Non-Standard Enhanced Roaming Indicator Numbers Reserved 8-

39 GPP C.R00-D 8 9 SHORT MESSAGE SERVICES ASSIGNMENTS [] defines the protocol and procedures associated with exchange of Short Message Services (SMS). The protocol defined in [] allows use of various data encoding schemes, various language indicators and various Service Categories for the Broadcast Messaging Service. 9. Data Field Encoding Assignments Table 9.- shows the data encoding scheme assignments that were made and approved as of the date of this publication. 9-

40 GPP C.R00-D Table 9.-. Data Field Encoding Assignments CHARi Encoding Type MSG_ENCODING Field v Length of CHARi, bits Octet, unspecified Extended Protocol Message [] 0000 (see iv) -bit ASCII [] 0000 IA (Table of []) 000 UNICODE [9] i 0000 Shift-JIS [0] ii or Korean [] iii or Latin/Hebrew [8] 00 8 Latin [] GSM -bit default alphabet [] 000 All other values are reserved. i UNICODE is a fixed -byte encoding method intended as an international character encoding scheme. It encodes most of the national character sets of most countries, including support of local diacritical marks, and it unifies character sets across national boundaries. It is supported by many computer and telecommunication systems worldwide. UNICODE is a trademark of Unicode, Inc. ii Shift-JIS is a variable - byte non-modal encoding method widely implemented in Japan on a variety of computer platforms and pagers. It is used for the encoding of Kanji, Kana and Latin character sets defined in [0]. iii [] is a variable - byte encoding method widely used in Korea. iv Length is determined by the Message Type value. See Section.. and Appendix B of []. v [0] uses an 8-bit field to carry short message data encoding information, so conversion to a -bit field is required for transmission over the air interface. 9-

41 GPP C.R00-D 9. Language Indicator Value Assignments Table 9.- shows the data encoding scheme assignments that were made and approved as of the date of this publication. Table 9.-. Language Indicator Value Assignments Language Indicator Value (Binary) Language Unknown or unspecified English French Spanish Japanese Korean Chinese Hebrew All other values are reserved. NOTE: Table 0 of [0] specifies PreferredLanguageIndicator value assignments for intersystem operation which may be different from the values defined above. 9-

42 GPP C.R00-D 9. Service Category Assignments Service Categories for the Broadcast Messaging Service may be assigned for standard Service Categories and for proprietary Service Categories. 9.. Standard Service Category Assignments Table 9..- shows the standard Service Category assignments made and approved as of the date of this publication. 8 Table Standard Service Categories (Part of ) Category 0x0000 0x000 0x000 0x000 0x000 0x000 0x000 0x000 0x0008 0x0009 0x000A 0x000B 0x000C 0x000D 0x000E 0x000F 0x000 0x00 0x00 0x00 0x00 0x00 Description Unknown or unspecified Emergency Broadcasts Administrative Maintenance General News Local General News Regional General News National General News International Business/Financial News Local Business/Financial News Regional Business/Financial News National Business/Financial News International Sports News Local Sports News Regional Sports News National Sports News International Entertainment News Local Entertainment News Regional Entertainment News National Entertainment News International Local Weather Area Traffic Reports 9 9-

43 GPP C.R00-D Table Standard Service Categories (Part of ) Category 0x00 0x00 0x008 0x009 0x00A 0x00B 0x00C 0x00D 0x00E 0x00F 0x000 0x8000 Description Local Airport Flight Schedules Restaurants Lodgings Retail Directory Advertisements Stock Quotes Employment Opportunities Medical/Health/Hospitals Technology News Multi-category Reserved for standard service categories 9.. Proprietary Service Category Assignments Table 9..- shows the proprietary Service Category assignments made and approved as of the date of this publication. Table Proprietary Service Category Assignments Organization Category Category (Binary) Reserved 0x800 0xFFFF through

44 GPP C.R00-D No text. 9-

45 GPP C.R00-D 0 ANALOG FAX ASSIGNMENTS [] defines the protocol for Analog Fax services that allow identification of the IWF manufacturer in a tandem Analog Fax call. Using this, IWFs from the same manufacturer can invoke non-standardized protocols across the PSTN. The IWF manufacturer code is defined in Table 0-. Table 0-. Analog Fax Inter-working Function Manufacturer Code Assignments IWF_MANUF Analog Fax IWF Manufacturer Reserved QUALCOMM Incorporated CommWorks Corporation, A Com Company NEC Corporation All other values are reserved. 8 0-

46 GPP C.R00-D No text. 0-

47 GPP C.R00-D PROTOCOL AND APPLICATION ASSIGNMENTS. Protocol Type and Protocol Subtype Assignments [] defines a set of protocols identified by protocol type. A specific instance of a protocol is identified by a protocol subtype. Table.- shows the protocol type and protocol subtype assignments that were made and approved as of the date of this publication. Table.-. Protocol Type and Protocol Subtype Assignments (part of ) URWRFRO \SH URWRFRO XEW\SH DPH,' DPH,' K\VLFDO /D\HU [ Default Physical Layer 0x0000 &RQWURO &KDQQHO 0$& [ Default Control Channel MAC 0x0000 $FFHVV &KDQQHO 0$& [ Default Access Channel MAC 0x0000 )RUZDUG UDIILF &KDQQHO 0$& HYHUVH UDIILF &KDQQHO 0$& [ [ Default Forward Traffic Channel MAC Default Reverse Traffic Channel MAC 0x0000 0x0000.H\ ([FKDQJH [ Default Key Exchange 0x0000.H\ ([FKDQJH [ DH Key Exchange 0x000 $XWKHQWLFDWLRQ [ Default Authentication 0x0000 $XWKHQWLFDWLRQ [ SHA- Authentication 0x000 (QFU\SWLRQ [ Default Encryption 0x0000 HFXULW\ [ Default Security 0x0000 HFXULW\ [ Generic Security 0x000 DFNHW &RQVROLGDWLRQ [ Default Packet Consolidation 0x0000 $LU/LQN 0DQDJHPHQW [D Default Air-Link Management 0x0000,QLWLDOL]DWLRQ WDWH [E Default Initialization State 0x0000,GOH WDWH [F Default Idle State 0x0000 &RQQHFWHG WDWH [G Default Connected State 0x0000 RXWH 8SGDWH [H Default Route Update 0x0000 YHUKHDG 0HVVDJHV [I YHUKHDG 0HVVDJHV 0x

48 GPP C.R00-D Table.-. Protocol Type and Protocol Subtype Assignments (part of ) Protocol Type Protocol Subtype Name ID Name ID Session Management 0x0 Default Session Management 0x0000 Address Management 0x Default Address Management 0x0000 Session Configuration 0x Default Session Configuration 0x0000 Stream 0x Default Stream 0x0000 Stream 0 Application 0x Application Subtype as per. See. Stream Application 0x Application Subtype as per. See. Stream Application 0x Application Subtype as per. See. Stream Application 0x Application Subtype as per. See. -

49 GPP C.R00-D. Application Subtype Assignments An application subtype identifies the application that is bound to a [] stream. Table.- shows the application subtype assignments that were made and approved as of the date of this publication. Table.-. Application Subtype Assignments Value Name Associated Standards 0x0000 Default Signaling Application [] 0x000 0x000 Default Packet Application bound to the access network. Default Packet Application bound to the service network. [] [] 0x000 Test Application [] 0xFFFF Stream not used None All other values are reserved. 8 -

50 GPP C.R00-D No text. -

51 GPP C.R00-D MANUFACTURER-SPECIFIC POSITION LOCATION ASSIGNMENTS [] reserves specific ranges of values for manufacturer-specific Position Location assignments. Values in specified ranges are reserved as shown in Table -. Specific assignments are given in sections. through.. Table -. Manufacturer-specific Position Location Assignments Position Location Value Reserved Manufacturer- Specific Range Reference in [] Reverse Link Message Types (PD_MSG_TYPE) Forward Link Message Types (PD_MSG_TYPE) Reverse Link Message Type Assignments Table.- shows the proprietary assignments of Reverse Link Message Type (PD_MSG_TYPE). These assignments were made and approved as of the date of this publication. All message type values in the table are binary. An x represents either a zero or a one. Table.-. Proprietary Assignments of Reverse Link Message Type Organization PD_MSG_TYPE (Binary) QUALCOMM Incorporated 00 00xx Reserved Forward Link Message Type Assignments Table.- shows the proprietary assignments of Forward Link Message Type (PD_MSG_TYPE). These assignments were made and approved as of the date of this publication. All message type values in the table are binary. An x represents either a zero or a one. -

52 GPP C.R00-D Table.-. Proprietary Assignments of Forward Link Message Type Organization PD_MSG_TYPE (Binary) QUALCOMM Incorporated 00 00xx Reserved