AGFA HEALTHCARE DICOM Conformance Statement

Transcription

1 HE/ITR&D/SIV/PB/PL/ Page 1 of 65 AGFA HEALTHCARE DICOM Conformance Statement SCP Print Management Service Class Paxport (PMS) MeGa V Service Supported Class Agfa User Printers: LR3300/LR5200/DRYSTAR 2000/DRYSTAR 3000 Status: Released Document No , Revision 2.4 Peter Beckers, Peter Luyckx

2 Page 2 of 65 HE/ITR&D/SIV/PB/PL/ Rel September, 2005 Agfa HealthCare Document Information Author Peter Beckers Tel: Fax: peter.beckers@agfa.com Peter Luyckx Tel: Fax: peter.luyckx@agfa.com: bruno.laffin@agfa.com Editing & Layout Linda De Wolf Agfa HealthCare Septestraat 27 B-2640 Mortsel Belgium linda.dewolf@agfa.com Service-related issues North America Agfa Customer Solutions Center USA Tel: 1 (877) 777-AGFA x.jsp Service-related issues worldwide MI-CSO, Munich Tel: Fax: or x.jsp Issued by: Agfa HealthCare Septestraat 27 B-2640 Mortsel Belgium tel: fax: koenraad.caron@agfa.com Agfa shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this publication. Agfa reserves the right to revise this publication and to make changes to its content at any time, without obligation to notify any person or entity of such revisions and changes. This publication may only be used in connection with the promotion, sales, installation and use of Agfa equipment. Copyright September, 05 Agfa HealthCare All rights reserved

3 MED/PC/ Page 3 of 65 Document N , Revision 2.4 Table of Contents 1 Introduction Intended Audience Integration Validation Future Evolution Purpose of this Document Implementation Model Application Data Flow Diagram Functional Definitions of AEs Sequencing of Real World Activities AE Specifications Print Management Service Specifications Meta SOP Classes & Optional SOP Classes Supported SOP Classes for Basic Grayscale Print Management Meta SOP Class Supported SOP Classes for Basic Color Print Management Meta SOP Class Supported SOP Classes for Referenced Grayscale Print Management Meta SOP Class Supported SOP Classes for Referenced Color Print Management Meta SOP Class Supported Image Storage SOP Classes Association Establishment Policies General Number of Associations Asynchronous Nature Implementation Identifying Information Association Initiation Policy Association Acceptance Policy Printing Encoded with Implicit or Explicit VR Associated Real World Activity Proposed Presentation Contexts SOP Specific Conformance to Basic Grayscale Print Management Meta SOP Class Basic Film Session SOP Class ( ) Basic Film Box SOP Class ( ) Agfa Film Layouts Film Layouts with Annotation Boxes Film Layouts with max. printable area Basic Grayscale Image Box SOP Class ( ) Printer SOP Class ( ) SOP Specific Conformance to Basic Color Print Management Meta SOP Class Basic Film Session SOP Class ( ) Basic Film Box SOP Class ( )... 33

4 Page 4 of 65 HE/ITR&D/SIV/PB/PL/ Rel September, 2005 Agfa HealthCare Basic Color Image Box SOP Class ( ) Printer SOP Class ( ) SOP Specific Conformance to Referenced Grayscale Print Management Meta SOP Class Basic Film Session SOP Class ( ) Basic Film Box SOP Class ( ) Referenced Image Box SOP Class ( ) Printer SOP Class ( ) VOI LUT Box SOP Class ( ) SOP Specific Conformance to Referenced Color Print Management Meta SOP Class Basic Film Session SOP Class ( ) Basic Film Box SOP Class ( ) Referenced Image Box SOP Class ( ) Printer SOP Class ( ) VOI LUT Box SOP Class ( ) SOP Specific Conformance to Basic Annotation Box SOP Class SOP Specific Conformance to Print Job SOP Class SOP Specific Conformance to Presentation LUT SOP Class SOP Specific Conformance to Verification SOP Class Communications Profiles Supported Communications Stacks Extensions/Specializations/Privatizations Configuration General SCU-specific PMS Configuration PMS Configuration Table local_port pms_reject mms_pms max_pdu_length extra_logging media_sizes Modality patient_id_stem UID_stem if_using_pmstst nevent_enabled film_type no_copies film_backg non_exp magnif_type smooth_factor dbmin dbmax... 54

5 MED/PC/ Page 5 of 65 Document N , Revision fit_dbmax cs_table trim_flag utl_id utl_subid printer_type text_flag Annotation Filenames: Annotation1 to Annotation Polarity Rotation metric_printing image_numbering bw_wwidth bw_wcenter color_wwidth color_wcenter Resolution ipl_id ipl_subid add_wl pms_prio confrmlevel img_prio pms_tmo img_tmo Miscellaneous Agfa Film Layout Documents Acronyms and Abbreviations...65

6 Page 6 of 65 HE/ITR&D/SIV/PB/PL/ Rel September, 2005 Agfa HealthCare Revision Record Revision Date Author Reason for Change September 2000 P. Beckers Functionality for warning SUPPLY EMPTY changed. Document retained for MeGa3.30/3.31. This new document made for Mega September 2000 P. Beckers Various minor corrections September 2000 A. Morris Cross-reference corrected December 2001 P. Wouters Section updated April 2001 P. Lang SSC references removed 1.5 July 2001 P. Beckers Support for Presentation LUT added September 2001 P. Beckers Released January 2002 P. Luyckx Updated for Color Separation Table February 2002 L. Wasserman Format updated February 2002 P. Luyckx Released July 2003 P. Luyckx Corrections to SOP Class UID values in tables 3.1 & 3.8 and chapter No WARNING in case of confrmlevel set to /08/2005 L. De Wolf Revision/ update on editing & layout

7 MED/PC/ Page 7 of 65 Document N , Revision INTRODUCTION 1.1 Intended Audience The user of this document is involved with system integration and/or software design. We assume that the reader is familiar with the terminology and concepts that are used in the DICOM 3.0 standard. Readers not familiar with DICOM 3.0 terminology should first read the appropriate parts of the DICOM standard itself, prior to reading this conformance statement. Although the use of this conformance statement in conjunction with the DICOM 3.0 standard is intended to facilitate communication with other medical imaging equipment, it is not sufficient to guarantee, by itself, the inter-operation of the connection. The following issues need to be considered: Integration The integration of any device into a system of interconnected devices goes beyond the scope of the DICOM 3.0 standard and this conformance statement when interoperability is desired. The responsibility for analyzing the applications requirements and developing a solution that integrates the Agfa equipment with other vendors systems is the user s responsibility and should not be underestimated Validation Testing the complete range of possibilities between the Agfa equipment and non-agfa devices, before the connection is declared operational, is deemed to be a necessity. The user should ensure that any non-agfa provider accepts full responsibility for all validation required for their connection with the Agfa equipment. The accuracy of image data once it has crossed the interface between the Agfa equipment and the non-agfa device as well as the stability of the image data for the intended applications is the responsibility of the non- Agfa provider Future Evolution As the DICOM 3.0 standard evolves to meet the user s growing requirements and to incorporate new features and technologies, Agfa will follow the evolution of the standard. This evolution of the standard may require changes to devices that have implemented DICOM 3.0. The user should ensure that any non-agfa provider, who connects with Agfa devices, also plans future evolution of the DICOM standard. A refusal to do so may reflect in the loss of functionality and/or connectivity between the different products. 1.2 Purpose of this Document This conformance statement specifies the compliance of the Print Management Service Class (PMS) component with the DICOM standard. The Print Management Service Class component is an implementation of the DICOM 3.0 standard for print management. The Print Management Service Class is used to send images to a hardcopy printer for printing on film or paper. The Print Management Service Class is a network print server for the Agfa MG 3000, DRYSTAR 2000 and DRYSTAR 3000.

8 Page 8 of 65 HE/ITR&D/SIV/PB/PL/ Rel September, 2005 Agfa HealthCare NOTE: Refer to the Conformance Statements Overview document by visiting to get an overview of all Conformance Statements and their relationship to one another. The SCU is responsible for providing the necessary image quality-related attributes to the SCP. 2 IMPLEMENTATION MODEL 2.1 Application Data Flow Diagram Figure 2.1: Implementation model. 2.2 Functional Definitions of AEs When the printing is invoked by the SCU AE, the SCU will make use of the SOP classes defined for Print Management which allow the definition of a Film Session with one or more subordinate Film Boxes, which in turn contain one or more subordinate Image Boxes. The SCU controls the printing by manipulating the Print Management SOP Classes by means of DIMSE services. The Print Management SOP Classes are managed by the PMS (SCP). The PMS (SCP) waits for another DICOM Print Management Service application AE (SCU) to connect. PMS (SCP) will accept Associations with Presentation Context for the Print Management Service Class. Only one printer is connected to a single PMS. 2.3 Sequencing of Real World Activities Not applicable for Real World Activities. However, a Film Session has to be created before one or more subordinate Film Boxes can be created. In turn, the Film Box has to be created before one or more subordinate Image Boxes can be created.

9 MED/PC/ Page 9 of 65 Document N , Revision AE SPECIFICATIONS The PMS accepts printing associations. 3.1 Print Management Service Specifications Meta SOP Classes & Optional SOP Classes The PMS provides standard conformance to the following DICOM 3.0 Meta SOP Classes and DICOM 3.0 SOP Classes as SCP: Meta SOP Class Name SOP Class UID Basic Grayscale Print Management Meta SOP Class Basic Color Print Management Meta SOP Class Referenced Grayscale Print Management Meta SOP Class Referenced Color Print Management Meta SOP Class Optional SOP Class Name SOP Class UID Verification SOP Class Basic Annotation Box SOP Class Print Job SOP Class Presentation LUT SOP Class Table 3.1: Meta SOP classes & SOP classes. NOTE: The PMS SCP will by default only accept an association for the Basic Color Print Management Meta SOP Class or the Referenced Color Print Management Meta SOP Class if the attached device is a DRYSTAR However, this can be overruled by the configuration of the device. Support for the "Referenced Grayscale Print Management Meta SOP Class" and the "Referenced Color Print Management Meta SOP Class" also requires support for one or more "Image Storage SOP Classes" Supported SOP Classes for Basic Grayscale Print Management Meta SOP Class Support for Basic Grayscale Print Management as SCP also implies support for the following SOP Classes as SCP (refer to Table 3.2). However, the PMS shall not accept individual Presentation Contexts for these SOP Classes, except for the Printer SOP Class. SOP Class Name SOP Class UID Basic Film Session SOP Class Basic Film Box SOP Class Basic Grayscale Image Box SOP Class Printer SOP Class Table 3.2: Supported SOP Classes for Basic Grayscale Print Management Meta SOP Class.

10 Page 10 of 65 HE/ITR&D/SIV/PB/PL/ Rel September, 2005 Agfa HealthCare Supported SOP Classes for Basic Color Print Management Meta SOP Class Support for Basic Color Print Management as SCP also implies support for the following SOP Classes as SCP (refer to Table 3.3). However, the PMS shall not accept individual Presentation Contexts for these SOP Classes, except for the Printer SOP Class. SOP Class Name SOP Class UID Basic Film Session SOP Class Basic Film Box SOP Class Basic Color Image Box SOP Class Printer SOP Class Table 3.3: Supported SOP Classes for Basic Color Print Management Meta SOP Class Supported SOP Classes for Referenced Grayscale Print Management Meta SOP Class Support for Referenced Grayscale Print Management also implies support for the following SOP Classes as SCP (refer to Table 3.4). However, the PMS shall not accept individual Presentation Contexts for these SOP Classes, except for the Printer SOP Class. SOP Class Name SOP Class UID Basic Film Session SOP Class Basic Film Box SOP Class Referenced Image Box SOP Class Printer SOP Class VOI LUT Box SOP Class Table 3.4: Supported SOP Classes for Referenced Grayscale Print Management Meta SOP Class Supported SOP Classes for Referenced Color Print Management Meta SOP Class Support for Referenced Color Print Management also implies support for the following SOP Classes (refer to Table 3.5). However, the PMS shall not accept individual Presentation Contexts for these SOP Classes, except for the Printer SOP Class. SOP Class Name SOP Class UID Basic Film Session SOP Class Basic Film Box SOP Class Referenced Image Box SOP Class Printer SOP Class VOI LUT Box SOP Class Table 3.5: Supported SOP Classes for Referenced Color Print Management Meta SOP Class. NOTE: The VOI LUT Box SOP Class for the Referenced Color Print Management is an Agfa-specific extension.

11 MED/PC/ Page 11 of 65 Document N , Revision Supported Image Storage SOP Classes The following Image Storage SOP Classes, which support Color Images, are also supported as SCP in combination with PMS as SCP (refer to Table 3.6). The PMS will accept individual Presentation Contexts for these SOP Classes. If none is specified, the one specified for the META SOP Class is used. SOP Class Name SOP Class UID Computed Radiography Image Storage CT Image Storage MR Image Storage Nuclear Medicine Image Storage (retired) Nuclear Medicine Image Storage Ultrasound Image Storage (retired) Ultrasound Image Storage Secondary Capture Image Storage X-ray Angiographic Image Storage Table 3.6: Supported Image Storage SOP Classes for Referenced Color Print Management Association Establishment Policies General Before any SOP Classes can be exchanged between the SCU AE and the PMS (SCP), an association stage takes place to negotiate and exchange the capabilities of the SCU and SCP. The Print Management SCU and SCP establish an Association by using the Association Services of the DICOM Upper Layer. During association establishment, the DICOM Print Management AE negotiates the supported SOP classes. An association needs at least 150 Kbytes on disk quota. Only the SCU AE shall release an Association. The Association may be aborted by the SCU or by the SCP. The SCU AE attempts to initiate a new Association for each print session. This means that when no operation is done on the Association, the SCU should release the Association. One can only send DIMSE messages to instances that are created on the same Association. The Maximum PDU length for the PDUs offered by the PMS (SCP) is bytes. This means that the maximum value for a PDU-length field is bytes Number of Associations The number of supported Associations depends on the configuration of the printing device, with a maximum of 6 Associations. For DRYSTAR 3000, the maximum number of Associations is equal to 5. No more Associations are accepted if the DRYSTAR 3000 is set offline. However, a printer status OFFLINE is sent if the DRYSTAR 3000 is shut down Asynchronous Nature PMS (SCP) will only allow one outstanding operation on an Association. The PMS (SCP) can, however, issue an asynchronous N-EVENT message as defined in the supported SOP Classes Implementation Identifying Information The following identifying information is valid:

12 Page 12 of 65 HE/ITR&D/SIV/PB/PL/ Rel September, 2005 Agfa HealthCare Implementation Version Name: MG3000_VERSION_3 Implementation Class UID: DICOM Application Context Name: Association Initiation Policy Not applicable to the Print Management Service component, because the PMS (SCP) cannot initiate an Association. The PMS as SCU is not implemented Association Acceptance Policy The PMS (SCP) accepts an Association. If the Association is rejected or if all possible Presentation Contexts for the supported Meta SOP Classes are rejected, then the PMS (SCP) generates an error message and sends an abort-request for the Association. The PMS (SCP) obtains the called_ae_title from the ART configuration table (e.g. apip_dest ). This configuration is part of the installation procedure and described in a separate document. The calling_ae_title is used to setup specific configuration parameters. This configuration is also described in a separate document. All Associations must use the same destination TCP/IP port number Printing Encoded with Implicit or Explicit VR Associated Real World Activity The associated Real World Activity is the printing of a set of images that is encoded with any VR and requested over the network Proposed Presentation Contexts Any of the Presentation Contexts shown in the following tables is acceptable for PMS as SCP. Transfer Syntax DICOM Implicit VR Little Endian Transfer Syntax DICOM Explicit VR Little Endian Transfer Syntax DICOM Explicit VR Big Endian Transfer Syntax UID Table 3.7: Transfer syntaxes. The following Presentation Contexts are acceptable for PMS: Abstract Syntax Extended Transfer Syntax Role Name UID Negotiation Verification All from Table 3.7 SCP None Basic Grayscale Print Management (see Note) All from Table 3.7 SCP None Basic Color Print Management (see Note) All from Table 3.7 SCP None Referenced Grayscale Print Management * All from Table 3.7 SCP None Referenced Color Print Management (see Note) All from Table 3.7 SCP None Basic Annotation Box All from Table 3.7 SCP None Print Job All from Table 3.7 SCP None Presentation LUT All from Table 3.7 SCP None Table 3.8: Presentation contexts.

13 MED/PC/ Page 13 of 65 Document N , Revision 2.4 NOTE: Presentation Context shall use Abstract Syntax IDs that correspond to the SOP Classes UID of the Meta SOP Class specified in the first column of the Presentation Context Table or included SOP Classes. None of the included SOP Classes support extended negotiation SOP Specific Conformance to Basic Grayscale Print Management Meta SOP Class Standard conformance is also provided to the DICOM Basic Grayscale Print Management Class ( ) as SCP. The maximum number of Print Jobs is 1024 (providing that there is sufficient memory/disk allocation). Received attributes that are not supported will not issue an error or warning status code Basic Film Session SOP Class ( ) The following DIMSE services are supported: N-CREATE N-SET N-DELETE N-ACTION All other DIMSE services return the following error code: 0211H Error Unrecognized operation Table 3.9: DIMSE services error code. N-CREATE: is sent by the SCU AE to create a Basic Film Session SOP instance, when an Association has been established. If N-CREATE fails, the SCP AE will return an error message. The N- CREATE causes the Basic Film Session to be created and its attributes initialized. The Basic Film Session has to be created before the Basic Film Boxes are created. PMS only supports one Basic Film Session instance on an Association. No other concurrent Film Session shall be created on one Association. However, a sequential Film Session on the same Association is allowed after deleting the previous Film Session. Tag Name Supported Default (2000,0010) Number of Copies (2000,0020) Print Priority HIGH, LOW LOW, (MED=LOW) (2000,0030) Medium Type CLEAR FILM, BLUE FILM, PAPER Depending on dispenser contents (2000,0040) Film Destination See below PROCESSOR (2000,0050) Film Session Label Empty string (2000,0060) Memory Allocation (2050,0550) Ref. Presentation LUT seq. (0008,1150) >Ref. SOP Class UID (0008,1155) >Ref. SOP Instance UID Table 3.10: Supported attributes.

14 Page 14 of 65 HE/ITR&D/SIV/PB/PL/ Rel September, 2005 Agfa HealthCare When elements (2000,0010), (2000,0020), (2000,0030) and/or (2000,0040) are missing, the default value of the concerned element(s) is used. No error or warning status code is returned. When the value is present but incorrect, the default value of the concerned element(s) is used and no error or warning status code is returned. When element (2000,0050) is missing or incorrect, the default value of the concerned element is used. No error status code is returned. NOTE: The PMS can return the warning status code 0116H when the value is present but incorrect (refer to description of status codes in this Section and Section ). Medium Type (2000,0030): when opaque media is inserted, medium type PAPER has to be selected. The used value for Film Destination (2000,0040) depends on the configuration of the printer: The following values are supported for Agfa s Laser Imagers (LR): MAGAZINE PROCESSOR The following value is supported for Agfa s Thermal Sublimation printers (DRYSTAR): MAGAZINE is defaulted to PROCESSOR PROCESSOR Memory Allocation (2000,0060) is used if it is provided by the SCU AE. The SCP will return one of the following status codes for N-CREATE: 0000H Success Success is normally returned. 0116H Warning Attribute Value Out of Range. Returned warning if an attribute value is out of range for one of the following elements: Medium Type, Print Priority or Film Destination. The default value is then used for the element. The instance UID is created and can be used. 0117H Error Invalid Object Instance. Returned if a given instance UID has violated the UID construction rules. 0122H Error SOP Class Not Supported. Returned if the SOP Class specified in the N-CREATE command does not match the Basic Film Session SOP Class UID. 0213H Error Resource Limitation. Returned for the Basic Film Session SOP Class to indicate that the requested allocation can temporarily not be provided. Table 3.11: Status codes for N-CREATE. N-SET: is used to update a Basic Film Session instance. The SCP can return one of the following status codes for N-SET: 0000H Success Success is normally returned. 0110H Error Processing failure. Returned if no Data Set is provided by the SCU for the Basic Film Session SOP Class. 0116H Warning Attribute Value Out of Range. Returned warning if an attribute value is out of range for one of the following elements: Medium Type, Print Priority or Film Destination. 0119H Error Class-Instance Conflict. Returned if the SOP Class Instance UID is not defined for the given SOP Class. 0122H Error SOP Class Not Supported. Returned if the SOP Class specified in the N-SET command does not match the Basic Film Session SOP Class UID. 0213H Error Resource Limitation. Returned for the Basic Film Session SOP Class to indicate that the requested allocation can temporarily not be provided. Table 3.12: Status codes for N-SET. N-DELETE: is used to delete all info describing a Basic Film Session. The SCP can return one of the following status codes for N-DELETE:

15 MED/PC/ Page 15 of 65 Document N , Revision H Success Success is normally returned. 0119H Error Class-Instance Conflict. Returned if the SOP Class Instance UID is not defined for the given SOP Class. 0122H Error SOP Class Not Supported. Returned if the SOP Class specified in the N-DELETE command does not match the Basic Film Session SOP Class UID. Table 3.13: Status codes for N-DELETE. N-ACTION: is used to print a Film Session. A Print Job SOP instance is also created by the N-ACTION operation of the Film Session SOP Class, if the Print Job SOP Class was accepted in the Association set-up. NOTE: N-ACTION for multiple copies should print in the order according to the DICOM 3.0 standard. However, in exception to the DICOM standard, the N-ACTION for multiple copies prints as The SCP can return one of the following status codes for N-ACTION: 0000H Success Success is normally returned. 0115H Error Invalid Argument Value. Returned if the Action Type provided by the SCU is not recognized. 0119H Error Class-Instance Conflict. Returned if the SOP Class Instance UID is not defined for the given SOP Class. 0122H Error SOP Class Not Supported. Returned if the SOP Class specified in the N-ACTION command does not match the Basic Film Session SOP Class UID. B602H Warning Film Session SOP Instance hierarchy does not contain Image Box SOP Instances (empty page). C600H Error Film Session SOP Instance hierarchy does not contain Film Box SOP Instances. C601H Error Returned if the support for the Print Job Class was negotiated and the creation of the Print Job Instance failed. C604H Error Image position collision: multiple images are assigned to a single image position. Table 3.14: Status codes for N-ACTION Basic Film Box SOP Class ( ) The maximum number of simultaneous Film Box SOP instances is 32. If this maximum number of layouts is exceeded, the following status code is returned: 0110H Error Processing Failure Table 3.15: Error code for Film Box SOP Class. The following DIMSE services are supported: N-CREATE N-SET N-DELETE N-ACTION All other DIMSE services return the following error code:

16 Page 16 of 65 HE/ITR&D/SIV/PB/PL/ Rel September, 2005 Agfa HealthCare 0211H Error Unrecognized operation Table 3.16: Error code for DIMSE services. N-CREATE is sent by the SCU AE to create a Basic Film Box, once a Film Session has been successfully created. If N-CREATE fails, the SCP AE returns an error message. The creation of a Basic Film Box also causes the subordinate Basic Image Boxes to be created for each location in the film format. The Basic Film Box contains the presentation parameters common for all images on a given sheet of film. Tag Name Supported Default (2010,0010) Image Display Format STANDARD, ROW, COL, SLIDE, SUPERSLIDE, CUSTOM provided that these values are used in the Agfa mapping table (see below). (2010,0030) Annotation Display Format ID ANNOTATION supported when the Annotation SOP Class is accepted during Association setup (see SOP specific Conformance to Basic Annotation Box SOP Class). (2010,0040) Film Orientation PORTRAIT, LANDSCAPE PORTRAIT (2010,0050) Film Size ID 8INX10IN, 11INX14IN, 14INX14IN, 14INX17IN Depending on dispenser contents. (2010,0060) Magnification Type REPLICATE, BILINEAR, CUBIC CUBIC (2010,0080) Smoothing Type See below (2010,0100) Border Density BLACK, WHITE, i BLACK (where i is a value within the range of 0-255) (2010,0110) Empty Image Density BLACK, WHITE, i BLACK (where i is a value within the range of 0-255) (2010,0120) Minimum Density See below Depending on printer type and chosen film type. (2010,0130) Maximum Density See below Depending on printer type and chosen film type. (2010,0140) Trim YES, NO YES (2010,0150) Configuration Information See below (2010,015E) Illumination 2000 (2010,0160) Reflected Ambient Light 10 (2010,0500) Ref. Film Session Seq. (0008,1150) >Ref. SOP Class UID (0008,1155) >Ref. SOP Instance UID (2010,0510) Ref. Image Box Seq. (0008,1150) >Ref. SOP Class UID (0008,1155) >Ref. SOP Instance UID (2010,0520) Ref. Basic Annotation Box Seq. (0008,1150) >Ref. SOP Class UID (0008,1155) >Ref. SOP Instance UID (2050,0500) Ref. Presentation LUT Seq. (0008,1150) >Ref. SOP Class UID (0008,1155) >Ref. SOP Instance UID Table 3.17: Supported attributes. When element (2010,0040) and/or (2010,0050) is missing, the default value of the concerned element(s) is used. When the value is present it must be correct, otherwise status code 0106H is returned (refer to description of error codes in this section). When elements (2010,0060), (2010,0080) and/or (2010,0140) are missing, the default value of the concerned element(s) is used. No error or warning status code is returned. When the value is present but incorrect, the default value of the concerned element(s) is used and no error or warning status code is returned.

17 MED/PC/ Page 17 of 65 Document N , Revision 2.4 NOTE: The PMS can return the warning status code 0116H when the value is present but incorrect (refer to the description of status codes in this section and the parameter descriptions in Section ). When the value of elements (2010,0100), (2010,0110), (2010,0120) and/or (2010,0130) is incorrect, the Density value is mapped within the range of values depending on the chosen film type and film size. No error or warning status code is returned. When the value is present but incorrect, the default value of the concerned element(s) is used and no error or warning status code is returned. If no value is sent for Minimum Density (2010,0120) or Maximum Density (2010,0130), then the value is taken from the PMS configuration table and mapped within the range of values depending on the chosen film type and film size. No error or warning status code is returned. NOTE: The PMS can return the warning status code 0116H when the value is present but incorrect (refer to description of status codes in this section and Section ). When the value of element (2010,0150) is incorrect, no error or warning status code is returned. When element (2010,015E) and/or (2010,0160) is missing, the default value of the element(s) is used Agfa Film Layouts The attributes Image Display Format (2010,0010), Film Orientation (2010,0030) and Film Size ID (2010,0050) are used to uniquely define an Agfa film layout. Detailed layout information is described in separate documents. The following documents are available: 8 X10 Portrait Layouts for: LR2100, LR3300, LR X10 Landscape Layouts for: LR2100, LR3300, LR X10 Portrait Layouts for: DRYSTAR X10 Landscape Layouts for: DRYSTAR X11 Portrait Layouts for: LR2100, LR3300, LR5200, DRYSTAR X11 Landscape Layouts for: LR2100, LR3300, LR5200, DRYSTAR X14 Landscape Layouts for: LR2100, LR3300, LR X17 Portrait Layouts for: LR2100, LR3300, LR5200, DRYSTAR X17 Landscape Layouts for: LR2100, LR3300, LR5200, DRYSTAR X17 Portrait Long Leg Layouts for: LR2100, LR3300, LR5200, DRYSTAR 3000 Refer to the respective film layouts document for more information (e.g. print box sizes) on the different film layouts. For more information on these documents, see Section Film Layouts with Annotation Boxes Agfa film layouts with annotation boxes have a reserved area at the top and bottom of the film for printing annotations. Referring to an Agfa film layout with annotation boxes is done by mapping the DICOM-defined film format information with the corresponding Agfa film format (layout) identifier by means of an ASCII file (extension.idf). Each line of this mapping file contains the DICOM film format information, with the corresponding Agfa film format ID as follows: film_size\film_orientation\image_display_format<space>agfa_filmformat_id Any combination of these elements is possible, providing that a matching Agfa film layout ID is available. Available Agfa film layout IDs are listed in Table 3.19.

18 Page 18 of 65 HE/ITR&D/SIV/PB/PL/ Rel September, 2005 Agfa HealthCare Table 3.18 provides an overview of the available mapping files for film layouts with annotations for the different Agfa hardcopy devices: Mapping File Film Size 8X10 11X14 14X14 14X17 Hardcopy Device PMS.IDF LRxxxx PMS_DI.IDF DI2000 PMS53613.IDF DI3000 PMS53614.IDF DI3000 PMS53615.IDF DI3000 Table 3.18: Mapping files for layouts with annotations. The following Agfa film layout IDs (with annotation boxes ) are available: Hardcopy Device LRxxxx DI2000 DI3000 DI3000 DI3000 (.IDF) Mapping File PMS PMS_DI PMS53613 PMS53614 PMS INX10IN\PORTRAIT 8INX10IN\PORTRAIT\STANDARD\1, INX10IN\PORTRAIT\STANDARD\1, INX10IN\PORTRAIT\STANDARD\1, INX10IN\PORTRAIT\STANDARD\1, INX10IN\PORTRAIT\STANDARD\1, INX10IN\PORTRAIT\STANDARD\1, INX10IN\PORTRAIT\STANDARD\2, INX10IN\PORTRAIT\STANDARD\2, INX10IN\PORTRAIT\STANDARD\2, INX10IN\PORTRAIT\STANDARD\2, INX10IN\PORTRAIT\STANDARD\2, INX10IN\PORTRAIT\STANDARD\2, INX10IN\PORTRAIT\STANDARD\3, INX10IN\PORTRAIT\STANDARD\3, INX10IN\PORTRAIT\STANDARD\3, INX10IN\PORTRAIT\STANDARD\3, INX10IN\PORTRAIT\STANDARD\3, INX10IN\PORTRAIT\STANDARD\3, INX10IN\PORTRAIT\STANDARD\4, INX10IN\PORTRAIT\STANDARD\4, INX10IN\PORTRAIT\STANDARD\4, INX10IN\PORTRAIT\STANDARD\4, INX10IN\PORTRAIT\STANDARD\4, INX10IN\PORTRAIT\STANDARD\4, INX10IN\PORTRAIT\STANDARD\5, INX10IN\PORTRAIT\STANDARD\5, INX10IN\PORTRAIT\STANDARD\5, INX10IN\PORTRAIT\STANDARD\5, INX10IN\PORTRAIT\STANDARD\5, INX10IN\PORTRAIT\STANDARD\5, INX10IN\PORTRAIT\STANDARD\6, INX10IN\PORTRAIT\STANDARD\6, INX10IN\PORTRAIT\STANDARD\6, INX10IN\PORTRAIT\STANDARD\6, INX10IN\PORTRAIT\STANDARD\6, INX10IN\PORTRAIT\ROW\2,2, INX10IN\PORTRAIT\SUPERSLIDE Note: 16 image boxes are supported. 8INX10IN\PORTRAIT\SLIDE Note: 24 image boxes are supported.

19 MED/PC/ Page 19 of 65 Document N , Revision 2.4 Hardcopy Device LRxxxx DI2000 DI3000 DI3000 DI3000 (.IDF) Mapping File PMS PMS_DI PMS53613 PMS53614 PMS INX10IN\LANDSCAPE 8INX10IN\LANDSCAPE\STANDARD\1, INX10IN\LANDSCAPE\STANDARD\1, INX10IN\LANDSCAPE\STANDARD\1, INX10IN\LANDSCAPE\STANDARD\1, INX10IN\LANDSCAPE\STANDARD\1, INX10IN\LANDSCAPE\STANDARD\1, INX10IN\LANDSCAPE\STANDARD\2, INX10IN\LANDSCAPE\STANDARD\2, INX10IN\LANDSCAPE\STANDARD\2, INX10IN\LANDSCAPE\STANDARD\2, INX10IN\LANDSCAPE\STANDARD\2, INX10IN\LANDSCAPE\STANDARD\2, INX10IN\LANDSCAPE\STANDARD\3, INX10IN\LANDSCAPE\STANDARD\3, INX10IN\LANDSCAPE\STANDARD\3, INX10IN\LANDSCAPE\STANDARD\3, INX10IN\LANDSCAPE\STANDARD\3, INX10IN\LANDSCAPE\STANDARD\3, INX10IN\LANDSCAPE\STANDARD\4, INX10IN\LANDSCAPE\STANDARD\4, INX10IN\LANDSCAPE\STANDARD\4, INX10IN\LANDSCAPE\STANDARD\4, INX10IN\LANDSCAPE\STANDARD\4, INX10IN\LANDSCAPE\STANDARD\4, INX10IN\LANDSCAPE\STANDARD\5, INX10IN\LANDSCAPE\STANDARD\5, INX10IN\LANDSCAPE\STANDARD\5, INX10IN\LANDSCAPE\STANDARD\5, INX10IN\LANDSCAPE\STANDARD\5, INX10IN\LANDSCAPE\STANDARD\5, INX10IN\LANDSCAPE\STANDARD\6, INX10IN\LANDSCAPE\STANDARD\6, INX10IN\LANDSCAPE\STANDARD\6, INX10IN\LANDSCAPE\STANDARD\6, INX10IN\LANDSCAPE\STANDARD\6, INX10IN\ LANDSCAPE \SUPERSLIDE Note: 15 image boxes are supported. (*) 8INX10IN\ LANDSCAPE \SLIDE Note: 25 image boxes are supported. (*) (*) Layout without annotation boxes 11INX14IN\PORTRAIT 11INX14IN\PORTRAIT\STANDARD\1, INX14IN\PORTRAIT\STANDARD\1, INX14IN\PORTRAIT\STANDARD\2, INX14IN\PORTRAIT\STANDARD\2, INX14IN\PORTRAIT\STANDARD\2, INX14IN\PORTRAIT\STANDARD\3, INX14IN\PORTRAIT\STANDARD\3, INX14IN\PORTRAIT\STANDARD\3, INX14IN\PORTRAIT\STANDARD\3, INX14IN\PORTRAIT\STANDARD\4, INX14IN\PORTRAIT\STANDARD\4, INX14IN\PORTRAIT\STANDARD\4, INX14IN\PORTRAIT\STANDARD\4, INX14IN\PORTRAIT\STANDARD\5, INX14IN\PORTRAIT\STANDARD\5, INX14IN\PORTRAIT\STANDARD\5, INX14IN\PORTRAIT\STANDARD\5, INX14IN\PORTRAIT\STANDARD\6, INX14IN\PORTRAIT\STANDARD\6, INX14IN\PORTRAIT\SUPERSLIDE Note: 30 image boxes are supported.

20 Page 20 of 65 HE/ITR&D/SIV/PB/PL/ Rel September, 2005 Agfa HealthCare Hardcopy Device LRxxxx DI2000 DI3000 DI3000 DI3000 (.IDF) Mapping File PMS PMS_DI PMS53613 PMS53614 PMS INX14IN\PORTRAIT\SLIDE Note: 40 image boxes are supported. 11INX14IN\LANDSCAPE 11INX14IN\LANDSCAPE\STANDARD\1, INX14IN\LANDSCAPE\STANDARD\1, INX14IN\LANDSCAPE\STANDARD\2, INX14IN\LANDSCAPE\STANDARD\2, INX14IN\LANDSCAPE\STANDARD\2, INX14IN\LANDSCAPE\STANDARD\3, INX14IN\LANDSCAPE\STANDARD\3, INX14IN\LANDSCAPE\STANDARD\3, INX14IN\LANDSCAPE\STANDARD\3, INX14IN\LANDSCAPE\STANDARD\4, INX14IN\LANDSCAPE\STANDARD\4, INX14IN\LANDSCAPE\STANDARD\4, INX14IN\LANDSCAPE\STANDARD\4, INX14IN\LANDSCAPE\STANDARD\5, INX14IN\LANDSCAPE\STANDARD\5, INX14IN\LANDSCAPE\STANDARD\5, INX14IN\LANDSCAPE\STANDARD\5, INX14IN\LANDSCAPE\STANDARD\6, INX14IN\LANDSCAPE\STANDARD\6, INX14IN\LANDSCAPE\ROW\3, INX14IN\LANDSCAPE\ROW\2, INX14IN\LANDSCAPE\ROW\4,4, INX14IN 14INX14IN\PORTRAIT\STANDARD\1, INX14IN\PORTRAIT\STANDARD\1, INX14IN\PORTRAIT\STANDARD\2, INX14IN\PORTRAIT\STANDARD\2, INX14IN\PORTRAIT\STANDARD\2, INX14IN\PORTRAIT\STANDARD\3, INX14IN\PORTRAIT\STANDARD\3, INX14IN\PORTRAIT\STANDARD\3, INX14IN\PORTRAIT\STANDARD\3, INX14IN\PORTRAIT\STANDARD\4, INX14IN\PORTRAIT\STANDARD\4, INX14IN\PORTRAIT\STANDARD\4, INX14IN\PORTRAIT\STANDARD\4, INX14IN\PORTRAIT\STANDARD\5, INX14IN\PORTRAIT\STANDARD\5, INX14IN\PORTRAIT\STANDARD\5, INX14IN\PORTRAIT\STANDARD\5, INX14IN\PORTRAIT\STANDARD\6, INX14IN\PORTRAIT\STANDARD\6, INX14IN\PORTRAIT\SUPERSLIDE Note: 42 image boxes are supported. 14INX14IN\PORTRAIT\SLIDE Note: 56 image boxes are supported. 14INX17IN\PORTRAIT 14INX17IN\PORTRAIT\STANDARD\1, INX17IN\PORTRAIT\STANDARD\1, INX17IN\PORTRAIT\STANDARD\2, INX17IN\PORTRAIT\STANDARD\2, INX17IN\PORTRAIT\STANDARD\2, INX17IN\PORTRAIT\STANDARD\3, INX17IN\PORTRAIT\STANDARD\3, INX17IN\PORTRAIT\STANDARD\3, INX17IN\PORTRAIT\STANDARD\3, INX17IN\PORTRAIT\STANDARD\4, INX17IN\PORTRAIT\STANDARD\4, INX17IN\PORTRAIT\STANDARD\4, INX17IN\PORTRAIT\STANDARD\4,

21 MED/PC/ Page 21 of 65 Document N , Revision 2.4 Hardcopy Device LRxxxx DI2000 DI3000 DI3000 DI3000 (.IDF) Mapping File PMS PMS_DI PMS53613 PMS53614 PMS INX17IN\PORTRAIT\STANDARD\5, INX17IN\PORTRAIT\STANDARD\5, INX17IN\PORTRAIT\STANDARD\5, INX17IN\PORTRAIT\STANDARD\5, INX17IN\PORTRAIT\STANDARD\6, INX17IN\PORTRAIT\STANDARD\6, INX17IN\PORTRAIT\COL\4, INX17IN\PORTRAIT\ROW\3,3, INX17IN\PORTRAIT\ROW\4,4,4, INX17IN\PORTRAIT\SUPERSLIDE Note: 36 image boxes are supported. 14INX17IN\PORTRAIT\SLIDE Note: 56 image boxes are supported. 14INX17IN\LANDSCAPE 14INX17IN\LANDSCAPE\STANDARD\1, INX17IN\LANDSCAPE\STANDARD\1, INX17IN\LANDSCAPE\STANDARD\2, INX17IN\LANDSCAPE\STANDARD\2, INX17IN\LANDSCAPE\STANDARD\2, INX17IN\LANDSCAPE\STANDARD\3, INX17IN\LANDSCAPE\STANDARD\3, INX17IN\LANDSCAPE\STANDARD\3, INX17IN\LANDSCAPE\STANDARD\3, INX17IN\LANDSCAPE\STANDARD\4, INX17IN\LANDSCAPE\STANDARD\4, INX17IN\LANDSCAPE\STANDARD\4, INX17IN\LANDSCAPE\STANDARD\4, INX17IN\LANDSCAPE\STANDARD\5, INX17IN\LANDSCAPE\STANDARD\5, INX17IN\LANDSCAPE\STANDARD\5, INX17IN\LANDSCAPE\STANDARD\5, INX17IN\LANDSCAPE\STANDARD\6, INX17IN\LANDSCAPE\STANDARD\6, Table 3.19: Agfa film layout IDs with annotations Film Layouts with max. printable area It is also possible to use max. printable area film layouts; this means that there is no space foreseen for annotation boxes on these layouts. These max. printable area layouts can be selected in two ways: By means of the attribute: image_display_format with a value CUSTOM\i. In this case, i is a 3- or 4-digit number that represents the selected Agfa film layout ID. By mapping the DICOM-defined film format information with the corresponding Agfa film format (layout) identifier, by using the appropriate mapping file (extension.idf) for these layouts. These mapping files differ from the mapping files used for the default film layouts with annotations. This needs to be configured by Service during installation of the hardcopy device in relation to the AE Title of the host system. Table 3.20 summarizes the mapping files that only provide a max. printable area for 1/1 layouts. All other layouts are equal to the film layouts with annotation boxes. Hardcopy Device Film Size Film Orientation Columns Rows Agfa Layout ID Mapping File DI2000 8X10 Portrait Custom\3500 PMS_DI20.idf 8X10 Landscape Custom\3501 PMS_DI20.idf LR2100 8X10 Portrait Custom\2011 PMS2000.idf LR3300 8X10 Landscape Custom\2111 PMS2000.idf LR5200 (Note 1) 14X11 Portrait Custom\2211 PMS2000.idf DI3000 (Note 2) 14X11 Landscape Custom\2311 PMS2000.idf

22 Page 22 of 65 HE/ITR&D/SIV/PB/PL/ Rel September, 2005 Agfa HealthCare Hardcopy Device Film Size Film Orientation Columns Rows Agfa Layout ID Mapping File 14X14 Portrait Custom\2611 PMS2000.idf 14X17 Portrait Custom\2411 PMS2000.idf 14X17 Landscape Custom\2511 PMS2000.idf (1) For the LR5200, the rows and columns values need to be multiplied by 2. (2) One film size only for DI3000, and 8X10 film size is not applicable to DI3000. Table 3.20: Mapping files with max printable area for 1/1 layouts. It is also possible to have the max. printable area for all Agfa film layouts. Table 3.21 provides an overview of the available mapping files that exist for the different Agfa hardcopy devices, except for DRYSTAR 2000: Mapping File Film Size 8X10 11X14 14X14 14X17 Hardcopy Device MPA.IDF LRxxxx MPA53613.IDF DI3000 MPA53614.IDF DI3000 MPA53615.IDF DI3000 Table 3.21: Mapping files with max. printable area for all layouts. The following Agfa max. printable area film layout IDs are available: Hardcopy Device LRxxxx DI3000 DI3000 DI3000 (.IDF) Mapping File MPA MPA53613 MPA53614 MPA INX10IN\PORTRAIT 8INX10IN\PORTRAIT\STANDARD\1, INX10IN\PORTRAIT\STANDARD\1, INX10IN\PORTRAIT\STANDARD\1, INX10IN\PORTRAIT\STANDARD\1, INX10IN\PORTRAIT\STANDARD\1, INX10IN\PORTRAIT\STANDARD\1, INX10IN\PORTRAIT\STANDARD\2, INX10IN\PORTRAIT\STANDARD\2, INX10IN\PORTRAIT\STANDARD\2, INX10IN\PORTRAIT\STANDARD\2, INX10IN\PORTRAIT\STANDARD\2, INX10IN\PORTRAIT\STANDARD\2, INX10IN\PORTRAIT\STANDARD\3, INX10IN\PORTRAIT\STANDARD\3, INX10IN\PORTRAIT\STANDARD\3, INX10IN\PORTRAIT\STANDARD\3, INX10IN\PORTRAIT\STANDARD\3, INX10IN\PORTRAIT\STANDARD\3, INX10IN\PORTRAIT\STANDARD\4, INX10IN\PORTRAIT\STANDARD\4, INX10IN\PORTRAIT\STANDARD\4, INX10IN\PORTRAIT\STANDARD\4, INX10IN\PORTRAIT\STANDARD\4, INX10IN\PORTRAIT\STANDARD\4, INX10IN\PORTRAIT\STANDARD\5, INX10IN\PORTRAIT\STANDARD\5, INX10IN\PORTRAIT\STANDARD\5, INX10IN\PORTRAIT\STANDARD\5, INX10IN\PORTRAIT\STANDARD\5, INX10IN\PORTRAIT\STANDARD\5, INX10IN\PORTRAIT\STANDARD\6, INX10IN\PORTRAIT\STANDARD\6, INX10IN\PORTRAIT\STANDARD\6, INX10IN\PORTRAIT\STANDARD\6, INX10IN\PORTRAIT\STANDARD\6,

23 MED/PC/ Page 23 of 65 Document N , Revision 2.4 Hardcopy Device LRxxxx DI3000 DI3000 DI3000 (.IDF) Mapping File MPA MPA53613 MPA53614 MPA INX10IN\PORTRAIT\ROW\2,2, INX10IN\PORTRAIT\SUPERSLIDE Note: 16 image boxes are supported. 8INX10IN\PORTRAIT\SLIDE Note: 24 image boxes are supported. 8INX10IN\LANDSCAPE 8INX10IN\LANDSCAPE\STANDARD\1, INX10IN\LANDSCAPE\STANDARD\1, INX10IN\LANDSCAPE\STANDARD\1, INX10IN\LANDSCAPE\STANDARD\1, INX10IN\LANDSCAPE\STANDARD\1, INX10IN\LANDSCAPE\STANDARD\1, INX10IN\LANDSCAPE\STANDARD\2, INX10IN\LANDSCAPE\STANDARD\2, INX10IN\LANDSCAPE\STANDARD\2, INX10IN\LANDSCAPE\STANDARD\2, INX10IN\LANDSCAPE\STANDARD\2, INX10IN\LANDSCAPE\STANDARD\2, INX10IN\LANDSCAPE\STANDARD\3, INX10IN\LANDSCAPE\STANDARD\3, INX10IN\LANDSCAPE\STANDARD\3, INX10IN\LANDSCAPE\STANDARD\3, INX10IN\LANDSCAPE\STANDARD\3, INX10IN\LANDSCAPE\STANDARD\3, INX10IN\LANDSCAPE\STANDARD\4, INX10IN\LANDSCAPE\STANDARD\4, INX10IN\LANDSCAPE\STANDARD\4, INX10IN\LANDSCAPE\STANDARD\4, INX10IN\LANDSCAPE\STANDARD\4, INX10IN\LANDSCAPE\STANDARD\4, INX10IN\LANDSCAPE\STANDARD\5, INX10IN\LANDSCAPE\STANDARD\5, INX10IN\LANDSCAPE\STANDARD\5, INX10IN\LANDSCAPE\STANDARD\5, INX10IN\LANDSCAPE\STANDARD\5, INX10IN\LANDSCAPE\STANDARD\5, INX10IN\LANDSCAPE\STANDARD\6, INX10IN\LANDSCAPE\STANDARD\6, INX10IN\LANDSCAPE\STANDARD\6, INX10IN\LANDSCAPE\STANDARD\6, INX10IN\LANDSCAPE\STANDARD\6, INX10IN\ LANDSCAPE \SUPERSLIDE Note: 15 image boxes are supported. 8INX10IN\ LANDSCAPE \SLIDE Note: 25 image boxes are supported. (*) Layout without annotation boxes 11INX14IN\PORTRAIT 11INX14IN\PORTRAIT\STANDARD\1, INX14IN\PORTRAIT\STANDARD\1, INX14IN\PORTRAIT\STANDARD\2, INX14IN\PORTRAIT\STANDARD\2, INX14IN\PORTRAIT\STANDARD\2, INX14IN\PORTRAIT\STANDARD\3, INX14IN\PORTRAIT\STANDARD\3, INX14IN\PORTRAIT\STANDARD\3, INX14IN\PORTRAIT\STANDARD\3, INX14IN\PORTRAIT\STANDARD\4, INX14IN\PORTRAIT\STANDARD\4, INX14IN\PORTRAIT\STANDARD\4, INX14IN\PORTRAIT\STANDARD\4, INX14IN\PORTRAIT\STANDARD\5, INX14IN\PORTRAIT\STANDARD\5, INX14IN\PORTRAIT\STANDARD\5,