Satellite Radio Functions

Transcription

1 Satellite Radio Functions 1 ENTER - Select in the menu, activate a selection. 2 ON/OFF - Press for audio On / Off. 3 VOLUME - Volume control. 4 MUTE - Press to mute the volume at any time. Press again to unmute 5 MENU - Opens the main menu. 6 EXIT - Press to navigate back one in the menu. Press and hold to navigate back to the default screen. Cancel a selection. 7 DISPLAY - Presents options, menus and information. 8 UP/DOWN - Navigate up / down in the menus or select preset stations. 9 TUNING - Rotate to manually search stations or navigate up / down in the menus / PASS AIR BAG OFF 9/

2 10 SOUND - Press for less than three seconds to display song category menu. Also press to use as ENTER. 11 LEFT/RIGHT - Press left or right once to move to the next or previous station. 12 SCAN - Automatic station search. 13 AUTO - Select radio text. 14 KEYPAD - Station presets and menu short-cuts. 15 MODE - Select Sat 1 or 2. Steering Wheel Controls 16 VOLUME - Volume control. 17 SCROLL - Navigate up / down the channel list. Sirius ID The Sirius ID is required when contacting the Sirius Call Centre. It is used to activate your account and when making any account transactions. The Sirius ID is sometimes referred to as the Electronic Serial Number (ESN). To access the 12 digit SIRIUS ID: 2. Navigate to SIRIUS menu... >(ENTER)> Advanced SRIUS settings... >(ENTER)> SIRIUS ID >(ENTER). Selecting Satellite Radio Mode 1. Press ON/OFF to switch on the audio system. 2. Press MODE repeatedly to select SAT 1 or 2. Activating Satellite Radio 1. Tune to a satellite channel that has no audio, which means that the channel is unsubscribed and the text Call Sirius to Subscribe is displayed. 2. Call Sirius at SIRIUS (7474). When asked for the Sirius ID number press AUTO to display this number. Updating Subscription will be displayed while the subscription is being updated, after which the DISPLAY will return to the normal view. 8.15

3 Channels Selecting a Channel Category 1. With active, press the MODE button repeatedly to select SAT 1 or Press ENTER to access song category menu. 3. Use the UP/DOWN buttons or TUNING dial to navigate through the list of categories. Press ENTER to select a category. 4. Use the LEFT/RIGHT buttons to select a channel. starts after a few seconds. The category All is default, which enables you to navigate through the entire list of available satellite channels. Channel categories are automatically updated several times a year. This takes approximately two minutes and will interrupt normal broadcasting. A message will be displayed while updating is in progress. Information on channel or feature updates is available at Selecting a Channel There are three ways of tuning in a channel: Press and release the LEFT/RIGHT or the SCROLL button to select the next tuned channel. By rotating the TUNING dial to navigate through the available channels Through direct channel entry Direct Channel Entry The Sirius satellite channels are numbered consecutively throughout all of the categories. To access a channel directly: 2. Navigate to SIRIUS menu... >(ENTER)> Direct channel entry >(ENTER). 3. Use the KEYPAD to enter the channel s number. Press ENTER. The radio will tune to this channel, even if it belongs to a category other than the currently selected one. The numbers of skipped or locked channels will not be displayed. 8.16

4 If a channel is locked, the access code must be entered before the channel can be selected (Refer to Unlocking a Channel, page 8.19). Scanning Press SCAN to automatically search through the list of satellite channels. Press SCAN or EXIT to accept the station. Storing a Channel A total of 20 satellite channels can be stored; 10 channels each for SAT 1 and 2. A long press on one of the KEYPAD numbers stores the currently tuned channel on that key. Pressing on a KEYPAD number while the radio is in SAT 1 or 2 mode will tune to the preset satellite channel stored on that button, regardless of the currently selected channel category. Song Seek and Song Memory The Song Seek and Song Memory functions provide both audio and visual notification when Sirius is broadcasting your favorite songs. Song Seek enables you to store the name of the song for future advance notification when that song is being played. The Song Memory feature makes it possible to view all of the current songs that are stored in memory. Song Seek When a satellite radio channel plays one of the songs stored in the song memory, the listener will be alerted by a text message and an audible signal. Press ENTER to listen to the song or EXIT to cancel. To activate / deactivate the song seek function: 2. Navigate to SIRIUS menu... >(ENTER)> Song seek >(ENTER). When the song has ended, the radio will remain tuned to the channel on which the song was played. Song Memory Up to ten songs can be saved in the system s memory. 1. When the song is playing press MENU. 2. Navigate to SIRIUS menu... >(ENTER)> Add song to song mem >(ENTER). If a new song is selected when the memory is full, a prompt to delete the last song on the list will show. Press ENTER to delete the last song on the list. The remaining songs in the list will move down one position, and the newly added song will be placed at the top of the list. 8.17

5 Radio Text Skip Options View Song Memory List settings... >(ENTER)> Song memory >(ENTER). 3. Scroll through the song list using the UP/DOWN buttons or the TUNING dial. Press the TUNING dial twice to delete the song if required. The type of text information displayed about the song currently playing can be changed. Use the AUTO button or the menu to display the Artist, Title, Composer, or switch radio text off. This function is used to remove a channel from the list of available channels. Skip Current Channel settings... >(ENTER)> Skip options >(ENTER)> Channel Skip List >(ENTER). 3. Select a category in the list and press ENTER. 4. Skip channels in the list by pressing ENTER. Unskip all Channels This permanently removes all channels from the skip list and makes them available for selection. 8.18

6 settings... >(ENTER)> Skip options >(ENTER)> Channel Unskip all channels >(ENTER). Temporally Unskip all Ch. This function will temporarily unskip all channels and make them available for selection. The channels remain on the skip list and will again be skipped the next time the ignition is switched on. settings... >(ENTER)> Skip options >(ENTER)> Temporally Unskip all Ch. >(ENTER) Channel Lock Access to specific channels can be restricted (locked). A locked channel will not provide audio, song titles, or artist information. Channels must be unlocked to be available for selection. All channels are initially unlocked at delivery. Locking a Channel 2. Select SIRIUS menu... >(ENTER)> Lock Options >(ENTER)> Channel Lock List >(ENTER). 3. Enter the channel access code 1 and press ENTER. 4. Select a category in the list and press ENTER. 5. Lock channels in the list presented by pressing ENTER. The channel is now locked and a checked box will be displayed to indicate this. It will be necessary to enter the channel access code in order to listen to a locked channel. Unlocking a Channel A channel s access code 1 is required to unlock a channel. settings... >(ENTER)> Lock options >(ENTER)> Channel lock list >(ENTER). 1. The default code is If the code has been forgotten, view the access code (Refer to View Access Code, page 8.21). 8.19

7 Change Code Unlock all Channels This permanently removes all channels from the locked list and makes them available for selection. settings... >(ENTER)> Lock options >(ENTER)> Channel Unlock all channels >(ENTER). Temporally Unlock All Ch. This function will temporarily unlock all channels. The channels remain on the locked list and will again be locked the next time the ignition is switched on. settings... >(ENTER)> Lock options >(ENTER)> Temporary unlock all ch. >(ENTER). This function makes it possible to change the channel access code. The default code is To change the code: 2. Select SIRIUS menu... >(ENTER)> Advanced SIRIUS settings >(ENTER)> Lock options >(ENTER)> Change Code >(ENTER). 3. Enter the current code and press ENTER. 4. Enter the new code and press ENTER. 5. Confirm the new code and press ENTER. If an incorrect code is entered, the text Incorrect Code! is displayed. 8.20

8 View Access Code If the access code has been forgotten: 2. Select SIRIUS menu... >(ENTER)> SIRIUS ID >(ENTER). 3. Press and hold ENTER for two seconds. The current code will be displayed. Your Aston Martin dealer can also provide you with assistance. SIRIUS Menu (1)SIRIUS menu... (1)Add song to memory (2)Direct channel entry (3)SIRIUS radio text (4)Song seek (5)Advanced SIRIUS settings... (1)Song memory (2)Skip options (1)Channel skip list (2)Unskip all channels (3)Temporally unskip all ch. (3)Lock options (1)Channel lock list (2)Unlock all channels (3)Temporally unlock all ch. (4)Change code (4)SIRIUS ID (6) settings... (1)Surround SIRIUS... (2)Equalizer... (3)Auto volume control (4)Reset all 8.21