DigiMicro Profi DM profi4lg.indd 1 DM profi4lg.indd :03:13

Transcription

1 DigiMicro Profi

2 Content Security instructions...19 Appliance description System requirements...20 Delivery content...20 Appliance description...21 Getting started...22 Software...26 Image editing...28 Specifi cations...30 Declaration of conformity...32 Disposal of electronic equipment...32 Service informationen...33 Warranty regulations...63 subject to change without prior notice

3 Security instructions Please read this information carefully before you use the appliance. Sicherheitshinweise General instructions Don t place the unit on unstable location, if it falls down, people may be injured. The unit is not a toy, please beware of small children. If you connect the unit to other electronic devices, please study also the security instruction of this device. If you have any question regarding the unit, how it works, the safety or the correct connection please contact our technical support or ask any specialist. The seller will not be liable for any damages caused by misuse of the product and any claim from third parties. Environmental conditions Don t drop or shake the unit, it might be damaged. Avoid too high pressure to the LC-display, it might be damaged. Don t leave the unit where the temperature is higher than 60 C, e.g. in cars with closed windows in the summertime, near heaters or any other type of heat source. Don t use the unit in rooms with high humidity e.g. bathrooms. Parts of the apparatus, tube and mini camera, are water proofed See technical specifi cations for details Don t use the unit at dusty places. Technical problems In case any foreign material or liquid gets into the product, please immediately remove the power cord. Before you use it again, ask your authorised dealer to check the product carefully. Please do not hesitate to contact our service center. Packaging material Please don t keep any packaging material within reach of small children. It can become a dangerous toy. Maintenance We strongly suggest using a clean, dry, non-alcohol cotton swab to clean the glass surface periodically to produce a clear image during operation

4 DM profi.indd :33:27 Delivery content Systemrequirements OS: MS Windows XP SP2/Vista/ Windows7/Windows8 min. Prozessor Pentium or compabible AMD Processor RAM 512 MB 24 Bit Video card, 64M USB 2.0 port CD-ROM drive Delivery content DigiMicro Profi Stand DigiMicro Profi Bedienungsanleitung user manual CD

5 Appliance description Appliance description left side cable guide up/down rough adjustment lock/release mikroscope mounting screw focus adjustment metal pole optic illumination mounting nut carriage stage right side microscope slide up/down rough focus USB cable snapshot button(windows only) LED dimmer USB connector

6 Getting started Getting started Stand mounting. Slide the mounting nut on the metal pole. Put the metall pole into the female part of the stage

7 Getting started Fix the Pole on the stage. Put the microscope into the ring of the stand

8 Getting started Getting started The microscope is attached to a metal pole and adjusted with different wheels. rear side view Moves the slide up and down To fi xe the microscope slide To fi xe the holder to the pole Rotate the wheel on the rear side for a rough adjustment. Loosen the wheel and mount the holder to an appropriate height. Move the slide to an appropriate height. Rotate the wheel to get a rough focus

9 Operation Rotate the wheel to get a fi ne focus

10 Software installation Install the software Insert the driver CD into CD-ROM Drive and this will automatically display the following interface. Install MicroCapture Pro. Click Install MicroCapture Pro and the installation wizard will guide you through the whole process. Full user s manual can be viewed by clicking User s Manual. Connect your Microscope to your PC USB port, start the software by clicking the Microcapture Pro icon generated on the desktop after installation and you will see the following screen pop up. When the Microscope is disconnected from your PC USB port, the following message will pop up: No Device detected,please connect your Microscope directly to your PC USB port

11 Software Software microcapture Pro The saftware ha a multilanguage user interface. To change the language select Options > Language >. The captured image is displayed on the right side as a thumbnail. If the mouse moves over a thumbnail, the image is shown in the preview window. The right mouse button shows a submenu where you can open, save, copy and delete the photo. Open will open the photo in the preview window. Save or Save as will open a dialog window to browse a folder of your choice. Copy will copy the photo to the clipboard. Delete to delete the current photo.delete all to delete all photos from the list. The transmission rate of the USB interface is limited. Therefore, the resolution in the preview is limited to 1280x960, but are photos are stored in the preview size. To take a phot press snapshot button or the camera icon above the preview window. The phots are stored the Photos Directory. The captured image is displayed on the right side as a thumbnail. To capture a video click on the video camera button above the preview window or select Capture > Video in the menu. Videos are stored in the Video Directory. To stop the capturing click on the fl ashing video camera button. The video is stored in the AVI format. Main menu File Photos Directory: Folder to store the photos. Video Directory: Folder to store the photos. Exit: Exit the program. Options Preview Size You can change the preview size. The size of the photo taken is equivalent to the preview size selected in the Options menu/preview Size. Date/Time On/Off displays the date and time in the photo or video. Language: Setup the language of the user interface Fullscreen mode: You can enter & quit full screen mode by: Double-clicking the preview area. Clicking the full screen icon. Crossing On/Off displays a cross in the preview windo. Capture Photo: Captures a single photo Video: Starts & stops capturing a video

12 Software Image editing Focus microscope on the attached calibration ruler and thenadjust the mangnifi cation till the picture is clear. Take a picture for the selected area when the dial is parallel to the crossing as below. Double-click on the picture to enter into measurement interface as below. Click Calibration icon, and then move mouse to the picture. Click on the beginning and ending points across a known value. Now a dialog will popup as below and you need to enter the exact value of the measurement sample into Actual dimension. Then the software will automatically calibrate the magnifi cation rate. Click OK and the adjusted magnifi cation rate will show in the upper right corner. Menu bar store image copy image to clipboard copy image last image, next image undo, redo

13 Software Drawing Click icon to choose any kinds of drawing under the pull-down manual as below. properties of the line Click dialogue icon and set the font for the text in the popup Double-click on the picture to enter into measurement interface. Under the Measurement icon, you can choose any desired options to measure. Any Angle Line Measurement. Simply click from one point and drag to the next point, and then release the click. Continuous Line Measurement. The Continuous Line measurement allows you to measure any continuous desired length. Simply click and drag from one point to other desired points, and then release the click. Radius Circle Measurement. Simply click and extend out to the desired radius, the radius, circumference and area of the circle will show up accordingly. Diameter Circle Measurement. Simply click and extend out to the desired diameter, the diameter, circumference and area of the circle will show up accordingly. Three Points Angle Measurement. Simply defi ne any three points angle and click, the angle value will then display

14 Specifications Specifications Image sensor 5 Mega Pixels Video resolution 2592x1944, 2048x1536, 1600x1200), 1280x960 Pixel Still capture resolution 2592x1944, 2048x1536, 1600x1200), 1280x960 Pixel Colour 24-Bit-RGB Focus Range manual focus from 10mm to 300mm Flicker-Frequenz 50/60 Hz Framerate: max. 30 frames/s Magnifi cation Ratio ca. 20x, 200x and 300x Imgae format JPG Video format AVI White balance automatic Light source 8 LED, white PC Interface USB 2.0 OS Windows XP SP2/Vista, Windows 7,Windows8, MAC OS 10.6 or higher DC Power 5 V (USB port) Microscope 110x35mm Stand 175x140x110mm Declaration of Conformity Hereby, dnt GmbH, declares that this DigiMicro Profi is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Disposal of electrical and electronic equipment This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product

15 Service information In case of complaints your device shows a defect, please consult your dealer or contact the service department of dnt to agree a servicing. Service time: Monday until Thursday from h Friday from h Hotline/Service: support@dnt.de Please do not send your device to our address without request by our service team. The expense and the risk of the loss are for debits of the sender. We reserve to refuse the unrequested shipment or return corresponding goods to the sender at buyer s risk and expense