Tryout Installation Manual Scia Design Forms

Transcription

1 Tryout Installation Manual Scia Design Forms

2 All information in this document is subject to modification without prior notice. No part or this manual may be reproduced, stored in a database or retrieval system or published, in any form or in any way, electronically, mechanically, by print, photo print, microfilm or any other means without prior written permission from the publisher. Scia is not responsible for any direct or indirect damage because of imperfections in the documentation and/or the software. Copyright 2012 Nemetschek Scia nv. All rights reserved. 2

3 Release: Scia Design Forms 3.5.x.x Manual: Tryout Installation Guide Revision: 10/2012 Nemetschek Scia Offices Belgium Headquarters Nemetschek Scia nv Industrieweg 1007 B-3540 Herk-de-Stad Tel.: Fax: Support Phone CAE (Scia Engineer) Tel: CAD (Allplan) Tel: CIM (Scia Steel, Scia Steel Manager) Tel: Concrete (Precast manager) Tel: Support Austria Scia Datenservice Ges.m.b.H Dresdnerstrasse 68/2/6/9 A-1200 Wien Tel.: Fax: info@scia.at Support Tel: support@scia-online.com Brazil Nemetschek do Brasil Software Ltda Rua Funchal, º andar Vila Olímpia - E-Tower São Paulo, SP Brasil Tel: Fax: brasil@scia-online.com Czech Republic Nemetschek Scia s.r.o. Evropská 2591/33E Praha 6 Tel.: Fax: info.praha@scia.cz Nemetschek Scia s.r.o. Slavickova 1a Brno Tel.: Fax: info.brno@scia.cz Finland Nemetschek Scia Finland Linnoitustie 5 FI ESPOO Tel.: Fax: finland@scia-online.com France Nemetschek Scia sarl 10, Rue du Roubaix FR Roubaix France Tel.: Fax: france@scia-online.com Agance commerciale: Tour d Asnières Sis 4 Avenue Laurent Cély F Asnières-sur-Seine Germany Scia Software GmbH Emil-Figge-Strasse D Dortmund Tel.: / Fax: / info@scia.de Netherlands Nemetschek Scia bv Kroonpark 10 NL GV Arnhem Tel.: Fax: info@scia.nl Slovakia Nemetschek Scia s.r.o. Topol ová 8 SK Žilina Tel.: Fax: info@scia.sk Spain MP Scia INGENIERIA sl C/La Fuente 25 A ES El Molar (Madrid) Tel.: spain@scia-online.com Switzerland Nemetschek Scia Switzerland Dürenbergstr. 24 CH-3212 Gurmels Tel.: Fax: info@scia.ch UAE Nemetschek Scia Middle East Dubai Silicon Oasis HQ Building P.O. Box , Dubai, U.A.E. Tel.: Fax: uae@scia-online.com USA Nemetschek Scia North America 7150 Riverwood Drive Columbia, MD (USA) Tel.: Fax: usa@scia-online.com 3

4 Table of contents Table of contents Introduction Welcome System Requirements Hardware Software Installation of Scia Design Forms Installation of Scia Design Forms Installation of new FlexNET Network protection

5 1. Introduction 1.1 Welcome Welcome to the Scia Design Forms Installation Guide. Scia Design Forms is a program running under Windows XP/Vista/Windows 7. This manual describes the procedures for a correct installation of the application. 1.2 System Requirements To install Scia Design Forms it is recommended that your system qualifies the following requirements: Hardware Processor RAM Graphics Controller Disk space for installation, projects and temporary files Pentium IV - 3Ghz (Advised: CoreDuo2 3 Ghz and higher) 2 GB (Advised: > 4 GB) 256 MB, supporting OpenGL 100MB Minimum resolution 1280 x Software Scia Engineer on Macintosh To run the Scia Engineer software on Mac OS X virtualization software has to be used. Parallels Desktop 7 is recommended for this. When Parallels Desktop 7 is used, a Windows operating system may be installed as a virtual machine and Windows applications are used alongside Mac OS X applications. In this way, the user has 2 operating systems at the same time. Tryout installation A FlexNET service will run on: Windows XP 32 bit Windows Vista 32/64 bit Windows 2008 server 64 bit Windows 7-32/64 bit It is advised to install the latest Service Pack for these Operating Systems except SP3 for Windows XP. 5

6 2. Installation of Scia Design Forms This chapter describes the procedure to install Scia Design Forms. The installation procedure consists of the following steps: Installation of Scia Design Forms Installation of the FlexNET Tryout protection 2.1 Installation of Scia Design Forms 1. Download and execute SciaDesignForms_setup.exe 2. In the dialog box which appears, select the language for installation: 3. The Welcome screen for installation appears. Press [Next] to continue. 4. In the dialog Choose Destination Location the folder where the files will be installed can be specified. By default the destination folder is created in Program Files. It is advised to use this default location. 6

7 Press [Next] to continue. 5. In the dialog Protection Defaults the default values for the protection settings can be set. Activate Try-out version. Keep the option Run Activation manager when setup is finished checked! Press [Next] to continue. 6. The last window shows an overview of the selected settings. Press [Install] to start the installation process. 7. If the option Run Activation manager when setup is finished is checked, then follow instructions described in chapter After installation, the message appears that Scia Design Forms has been installed successfully. Press [Finish] to end the installation procedure. 7

8 2.2 Installation of new FlexNET Network protection 1. The Lock ID is stored in a.lid-file, which will be sent by . In this file the authorization code used by FlexNET is stored. Execute the Scia Activation Manager from the Start menu: All Programs/Scia License Server/Activation Manager A shortcut to this application can be found on your desktop as Activation manager. Press [Read Licence ID] The Lock ID is stored in a SCIAx.lid file, where x represents your license number. Select your SCIAx.lid file and press [Open] 2. Your license file appears in the Activation manager. Select your license number and press [Activate licence] 8

9 3. The circle in front of the license number will become green and the license file has been activated. Press [Close] Note: When using the license file on another computer, it is necessary to deactivate the license file on the previous server. Execute the Activation Manager Select the License file number and press [Return License] Press [Close] 9