SPECIAL ORDER MOULDINGS
|
|
|
- Agnes Daniel
- 6 years ago
- Views:
Transcription
1 LIMBACK LUMBER CO. LIMBACK LUMBER CO. LIMBACK LUMBER CO. OLD-FASHIONED LUMBERYARD WITH OLD FASHIONED SERVICE SINCE 1930 OL 2600 NW MARKET STREET SEATTLE, WA (206) FAX (206) SPECIAL ORDER MOULDINGS We are constantly making new profiles. Check our website for new additions. L This catalogue displays moulding profiles which we manufacture with knives we keep in stock. You pay a modest set-up charge, plus a per foot run charge, plus the price of material used. We normally manufacture with clear Fir or Poplar. However we can also use MDF, Hemlock, Philippine Mahogany, Cedar, and; depending on the profile, some of the other hardwoods. We have a profile knife grinder, which allows us to match any profile You might have. We need a wood sample or a To Scale drawing to quote you a price. (Not a fax, they do not keep to scale during transmission.) We try to keep lead time to 1-2 weeks or sooner.
2 CONTENTS ANGLE KNIVES 262 BACKBAND 186 BASE, STREAMLINE 67 BASE, O.G. (AND THICKER O.G. PATTERNS) 69 BASE, COVED (ACCEPTS DADOED CAP) 75 BASE/ CASINGS/ TRIMS--2-1/2 MAX 77 BASE/ CASINGS/ TRIMS--3-1/2 MAX 94 BASE/ CASINGS/ TRIMS--4-1/2 MAX 115 BASE/ CASINGS/ TRIMS--4-5/8 & WIDER 145 BASE CAP 35 BRICK MOLD 164 CAP MOLD 200 CORNICE MOLD 173 COVE 230 CROWN MOLD 236 DRIP CAP/ WATER TABLE 220 EDGE PATTERNS 18 FILLET 210 MISCELLANEOUS 211 PANEL MOLD & MULLIONS 208 PATTERN KNIVES 228 PICTURE MOLD 29 PLINTH BLOCKS 215 RADIUS KNIVES 266 ROUNDS/ FULL & PARTIAL 225 SYMMETRICAL MOLDINGS 48 TRIMS 3 WINDOW STOOL 218 2
3 TRIMS (ALSO SEE BASE CAP ) L /2 X 5/8 L X 1-1/8 L /8 X 11/16 L /16 X 5/8 L /4 X 1-9/16 L /4 X 3/4 L /8 X 3/4 L /8 X 1-5/8 L /4 X 3/4 L /16 X 1 L /8 X 1-7/16 L /4 X 1-1/8 L /16 X 1-5/8 L /16 X 1-9/16 L /16 X 1-1/2 L /8 X 1-1/4 3
4 TRIMS (ALSO SEE BASE CAP ) L /8 X 1/2 L /2 X 1 L /8 X 1-7/16 L /16 X 1 L /4 x 1-7/16 L /4 X 15/16 L /2 X 13/16 L /16 X 2 L /4 X 1-5/8 L /16 X 1-5/8 L /16 X 1 L /4 X 1-1/2 L /8 X 7/8 L /8 X 1-3/16 L /4 X 3/4 L /16 X 3/4 L /2 X 1-5/8 L /16 X 13/16 4
5 TRIMS (ALSO SEE BASE CAP ) L /16 X 1-1/4 L /8 X 1-9/16 L /8 X 1/2 L /8 X 1-9/16 L /8 X 1-1/8 L /2 X 3/4 L /4 X 1-1/4 L /8 X 1-1/4 L /4 X 1-1/4 L /8 X 1-1/8 (EDGE PATTERN) L /16 X 1-5/8 L /2 X 3/4 L /8 X 1-5/8 L /2 X 1-1/8 L /8 X 1-5/16 L /16 X 1-1/16 L /4 X 1-3/8 L /8 X 1-5/16 5
6 TRIMS (ALSO SEE BASE CAP ) L /8 X 7/8 L /2 X 3/4 L /2 X 1 L /8 X 1-5/8 L /16 X 1-3/8 L /16 X 1-3/4 L /8 X 1-5/8 L /16 X 7/8 L /16 X 1-5/8 L /16 X 1-3/4 L /2 X 1/2 L /8 X 1-15/16 L /4 X 1-1/2 L /16 X 1-1/8 6
7 TRIMS (ALSO SEE BASE CAP ) L /2 X 1-9/16 L X 1-3/8 L /8 X 13/16 L /4 X 1-1/4 L /16 X 13/16 L /8 X 7/8 L /16 X 1/2 L /16 X 1-1/4 L /2 X 7/8 L /16 X 1-5/8 L /2 X 13/16 L /2 X 1-3/8 L /16 X 15/16 L /8 X 3/4 L /16 X 1-1/2 L /8 X 1 L /8 X 7/8 7
8 TRIMS (ALSO SEE BASE CAP ) L /8 X 5/8 L /4 X 1-3/16 L /8 X 1-3/8 L /16 X 1-9/16 L /16 X 3/4 L /8 X 1-1/8 L /16 X 1-1/2 L /4 X 1-1/2 L /16 X 15/16 L /8 X 1-5/8 L /4 X 15/16 L /2 X 1-13/16 L /8 X 1-1/8 L /8 X 1-5/8 L /8 X 3/4 L /8 X 1-9/16 L /4 X 13/16 L /16 X 1-1/8 L /8 X 7/8 8
9 TRIMS (ALSO SEE BASE CAP ) L /8 X 5/8 L /16 X 11/16 L /4 X 1 L /8 X 3/4 L /2 X 1-1/8 L /4 X 1-5/16 L /4 X 1-1/2 L /16 X 15/16 L /8 X 1-5/8 L /16 X 1-1/2 L /8 X 1-3/16 L /2 X 1-1/8 L /8 X 15/16 L X 1-1/2 L /2 X 1-5/16 L /4 X 1-3/8 L X 1-1/2 L /2 X 1-3/8 L /8 X 1-3/4 L /2 X 7/8 9
10 TRIMS (ALSO SEE BASE CAP ) L /8 X 1-1/8 L /2 X 1-5/8 L /8 X 5/8 L /4 X 1-1/4 L /4 X 1-1/4 L /16 X 1-5/8 L /8 X 13/16 L /16 X 1-7/16 L /8 X 2 L /4 X 1-3/4 L /4 X 1-1/16 L /2 X 1 L /8 X 1 L /8 X 1-1/8 L /16 X 7/8 L /8 X 1-1/16 L /2 X 1-11/16 L /16 X 1-7/16 L /2 X 1-3/16 L /16 X 1 10 L /2 X 1 L /8 X 1-3/8
11 TRIMS (ALSO SEE BASE CAP ) L /2 X 1-1/4 L /8 X 1-5/8 L /2 X 13/16 L /16 X 1 L /8 X 1-3/4 L /4 X 1-1/2 L /4 X 1-5/8 L /16 X 1-3/4 L /2 X 1 L /4 X 1-9/16 L /8 X 1-3/4 L /16 X 1-1/4 L /8 X 1-3/4 L /16 X 1-15/16 L /2 X 1-7/16 L /4 X 1-1/2 L /8 X 2-1/8 L /2 X 1-13/16 L /8 X 3/4 L /16 X 1-1/8 11
12 TRIMS (ALSO SEE BASE CAP ) L /4 X 1-1/8 L /16 X 1-3/8 L X 7/8 L /4 X 5/8 L /8 X 1-1/16 L /4 X 1-5/8 L /16 X 1-1/16 L /8 X 1-1/8 L /4 X 1-1/4 L /2 X 5/8 L /16 X 1-7/16 L /8 X 1-1/2 L /4 X 1-1/2 L /4 X 1-7/8 L /16 X 1-1/2 L /2 X 1-1/8 L /16 X 1-1/2 L /2 X 1-3/16 L /8 X 1 L /4 X 1-3/4 L /8 X 5/8 12 L /8 X 7/8
13 TRIMS (ALSO SEE BASE CAP ) L /8 X 7/8 L /16 X 1-5/8 L /16 X 1 L /16 X 1-9/16 L /8 X 1-1/2 L /8 X 3/4 L /16 X 7/8 L /4 X 1-7/8 L /16 X 1-1/4 L /8 X 1-3/4 L /8 X 1-7/16 L /16 X 1 L /16 X 1-3/4 L /8 X 5/8 L /16 X 1-1/8 L /4 X 7/8 L X 2 L /4 X 1 13
14 TRIMS (ALSO SEE BASE CAP ) L /16 X 1-1/4 L /16 X 1-3/16 L /16 X 1/2 L /2 X 1-1/4 L /4 X 1-7/16 L /16 X 2-1/8 L /16 X 1 L /16 X 1-1/8 L /16 X 1-7/8 L /4 X 1-5/8 L /16 X 1-7/8 L /16 X 11/16 L /4 X 13/16 L /8 X 1-1/2 L /8 X 1-1/4 L /2 X 7/8 L /4 X 1-1/4 L /16 X 1 L /8 X 1-1/8 L /4 X 1-3/8 L /2 x 1-7/16 14
15 TRIMS (ALSO SEE BASE CAP ) L /16 X 1 L /2 X 5/8 L /16 X 11/16 L /4 X 1 L /2 X 1 L /8 X 1-1/16 L /8 X 1-5/8 L /8 X 1-3/16 L /4 X 1-5/8 L /8 X 11/16 15
16 TRIMS (ALSO SEE BASE CAP ) THIS PAGE INTENTIONALLY LEFT BLANK 16
17 TRIMS (ALSO SEE BASE CAP ) THIS PAGE INTENTIONALLY LEFT BLANK 17
18 EDGE PATTERNS---ANY WIDTH L-2001 L-2012 L-2002 L-2013 L-2003 L-2016 L-2004 L-2019 L-2005 L-2020 L-2006 L-2021 L-2009 L-2023 L-2010 L-2024 (NOT AN EDGE PATTERN) 2 MAX WIDTH L-2011 L
19 EDGE PATTERNS---ANY WIDTH L-2026 L-2040 (NOT AN EDGE PATTERN) 4-5/8 MAX WIDTH L-2027 L-2041 L-2043 L-2028 L-2044 L-2029 L-2045 L-2031 L-2046 L-2032 L-2047 L-2035 L-2049 L-2037 L
20 EDGE PATTERNS---ANY WIDTH L-2053 L-2070 L-2057 L-2072 L-2059 L-2073 L-2060 L-2074 L-2061 L-2075 L-2062 L-2065 L-2076 L-2078 L-2067 L
21 EDGE PATTERNS---ANY WIDTH L-2081 L-2097 L-2082 L-2099 (NOT AN EDGE PATTERN) 5 MAX WIDTH L-2087 L-2102 L-2089 L-2109 L-2093 L-1120 L-2094 L-2111 L
22 EDGE PATTERNS---ANY WIDTH L-2113 L-2124 L-2114 L-2125 L-2115 L-2126 L-2117 L-2127 L-2118 L-2129 L-2131 L-2121 L-2122 L
23 EDGE PATTERNS---ANY WIDTH L-2134 (NOT AN EDGE PATTERN) 5-1/2 MAX WIDTH L-2153 L-2136 L-2154 L-2138 L-2156 L-2142 L-2157 L-2143 L-2085 L-2147 L-2098 L-2148 L-2149 L-2100 L-2152 L /8 X 2 (NOT AN EDGE PATTERN) 23
24 EDGE PATTERNS---ANY WIDTH L-2104 (NOT AN EDGE PATTERN) 3/4 X 5-1/2 L-2106 L-2171 L-2160 L-2172 L-2173 L-2161 L-2163 L-2174 L-2164 L-2175 L-2167 L-2176 L-2169 L-2177 L-2170 L
25 EDGE PATTERNS---ANY WIDTH L-2196 L-2180 L-2197 L-2181 L-2198 L-2182 L-2199 L-2183 L-2200 L-2184 L-2202 L-2186 L-2204 L-2187 L-2209 L-2189 L-2212 L
26 EDGE PATTERNS---ANY WIDTH L-2214 L-2216 L-2218 L-2219 L-2227 L-2221 L-2222 L-2223 L-2226 L-2224 L-2225 L
27 EDGE PATTERNS---ANY WIDTH L /16 L /4 L /16 X 1-1/2 27
28 EDGE PATTERNS---ANY WIDTH THIS PAGE INTENTIONALLY LEFT BLANK 28
29 PICTURE MOULD (A DADO OR ANGLE CUT CAN BE ADDED) L /8 X 1-7/8 L /8 X 2-1/8 L /8 X 1-7/8 L /16 X 1-3/4 L /8 X 1-7/8 L /4 X 1-3/4 L /8 X 1-3/4 L /16 X 1-3/4 (STOCK W/O BACKCUT) L /16 X 1-7/8 L /16 X 1-3/4 L X 2 L /4 X 2-1/2 L X 2-1/8 L /4 X 2-9/16 29
30 PICTURE MOULD (A DADO OR ANGLE CUT CAN BE ADDED) L /8 X 2-1/2 L /4 X 1-11/16 L /8 X 1-7/8 L /8 X 2-1/4 L /4 X 2-1/2 L /4 X 2 L /4 X 1-9/16 L /4 X 2-9/16 L /16 X 2-7/16 L /4 X 1-7/8 L /4 X 1-3/4 L /4 X 1-7/8 L /4 X 2-1/2 L /4 X 1-3/4 L /16 X 2 L /8 X 2-9/16 30
31 PICTURE MOULD (A DADO OR ANGLE CUT CAN BE ADDED) L /4 X 2-1/4 L /4 X 2-1/4 L X 2-3/8 L /4 X 1-11/16 L /4 X 2-1/4 L /16 X 1-3/4 L /4 X 3-1/2 MDF ONLY L /8 x 1-3/4 L /16 X 2 L /4 X 2 L /16 X 2 L /16 X 1-5/8 L /4 X 2-5/8 L /16 X 2-1/2 L /4 X 1-15/16 L /16 X 1-3/4 L /16 X 1-7/8 L /4 X 2-7/8 31
32 PICTURE MOULD (A DADO OR ANGLE CUT CAN BE ADDED) L /16 X 1-9/16 L /4 X 1-3/4 L /4 X 2-5/8 L /4 X 2-7/16 L /4 X 2-1/2 L /8 X 2-1/4 L /16 X 1-7/8 L /16 X 1-3/4 L /16 X 2-1/2 L /16 X 1-3/4 L /4 X 2-3/4 L /16 X 2-1/16 L /4 X 1-13/16 L /8 X 2-1/2 32
33 PICTURE MOULD (A DADO OR ANGLE CUT CAN BE ADDED) THIS PAGE INTENTIONALLY LEFT BLANK 33
34 PICTURE MOULD (A DADO OR ANGLE CUT CAN BE ADDED) THIS PAGE INTENTIONALLY LEFT BLANK 34
35 BASE CAPS THAT NORMALLY FIT ON TOP OF A SQUARE S4S BOARD L /16 X 1 L /2 X 5/8 L /8 X 1-1/8 L /2 X 1-1/8 L /2 X 1 L /2 X 1-3/8 L /8 X 1-3/4 L /2 X 7/8 NOW IN STOCK L /16 X 1-5/8 L /16 X 1 L /8 X 2 L /16 X 1-1/8 L /8 X 2 L /8 X 7/8 L /16 X 1-7/8 L /8 X 1 L /8 X 1-3/4 35
36 BASE CAPS THAT NORMALLY FIT ON TOP OF A SQUARE S4S BOARD L /4 X 1-7/8 L /2 X 7/8 L /8 X 2 L /16 X 1-3/4 L /8 X 3/4 L /4 X 1-11/16 L /16 X 1-1/8 L /16 X 1-1/8 L /16 X 2 L /16 X 1 L /16 X 1-3/4 L /16 X 2-1/16 L /16 X 1-5/8 L /8 X 1-3/4 L /16 X 2 L /16 X 1 36
37 BASE CAPS THAT NORMALLY FIT ON TOP OF A SQUARE S4S BOARD L /16 X 1-7/8 L /4 X 1-1/2 L /16 X 2-1/2 L /8 X 13/16 L /4 X 7/8 L /16 X 1-1/8 L X 1-3/16 L /16 X 1-9/16 L /16 X 1-1/4 L /4 X 1-3/8 L /16 X 1-1/8 L /4 X 3/4 L /8 X 1-3/8 L /8 X 1-3/4 L /4 X 2-1/8 L /4 X 1-3/4 L /8 X 2 37
38 BASE CAPS THAT NORMALLY FIT ON TOP OF A SQUARE S4S BOARD L X 1-1/2 L /4 X 1-1/4 L /8 X 1-13/16 L /16 X 1-1/16 L /16 X 1-1/8 L /8 X 1-3/8 L /4 X 2-1/4 L /16 X 1-5/8 L /2 X 1-1/16 L /4 X 1-1/4 L /16 X 1-3/4 L /16 X 2-3/16 L /4 X 1-13/16 L /16 X 1-1/8 L /4 X 1-1/4 L /16 X 13/16 L /2 X 1 L /4 X 1-9/16 L /2 X 1-5/16 38
39 BASE CAPS THAT NORMALLY FIT ON TOP OF A SQUARE S4S BOARD L /4 X 1-11/16 L /4 X 1-3/4 L /4 X 2 L /4 X 1-1/8 L /4 X 1-7/8 L /8 X 1-13/16 L /4 X 1-9/16 L /4 X 2 L /16 X 1-3/4 L /8 X 1-1/8 L /16 X 2-1/4 L /16 X 1-9/16 L /4 X 1-3/4 L /16 X 2-1/16 L /4 X 1-5/8 L /4 X 2-13/16 L /16 X 1-3/4 L /4 X 1-13/16 39
40 BASE CAPS THAT NORMALLY FIT ON TOP OF A SQUARE S4S BOARD L /4 X 1-5/8 L /8 X 1-3/4 L /8 X 1-1/2 L /8 X 1-3/4 L /4 X 1-9/16 L /16 X 1-3/4 L /16 X 2-1/8 L /16 X 1-1/8 L /8 X 1-3/4 L /4 X 1-5/8 L /16 X 2 L /16 X 2-1/16 40
41 BASE CAPS THAT NORMALLY FIT ON TOP OF A SQUARE S4S BOARD THIS PAGE INTENTIONALLY LEFT BLANK 41
42 BASE CAPS THAT NORMALLY FIT ON TOP OF A SQUARE S4S BOARD THIS PAGE INTENTIONALLY LEFT BLANK 42
43 BASE CAPS THAT NORMALLY FIT ON TOP OF A SQUARE S4S BOARD THIS PAGE INTENTIONALLY LEFT BLANK 43
44 BASE CAPS, THAT WITH A DADO, FIT COVED-TOP BASES EXAMPLE L-2140 L-3071 L /16 X 1-7/8 L /4 X 2-1/4 L /8 X 2-5/16 L /8 X 2-3/16 L /8 X 2-1/8 L /16 X 2-3/8 L /16 X 2-1/8 L /8 X 2-3/8 L /16 X 1-3/4 L /4 X 1-3/4 L /16 X 2-1/8 L /8 X 2-13/16 44
45 BASE CAPS, THAT WITH A DADO, FIT COVED-TOP BASES L /16 X 2-3/8 L /4 X 2-1/4 L /16 X 2 L X 1-3/4 L /16 X 2-5/16 L /16 x 1-1/2 L /16 X 2-5/16 L /2 X 1-13/16 L /8 X 2-1/8 L /4 X 2 L /4 X 2-1/2 L /16 X 2-1/2 L /16 X 2 L /4 X 2-1/4 L /4 X 1-7/8 L /8 X 1-7/8 L /8 X 2-1/16 45
46 BASE CAPS, THAT WITH A DADO, FIT COVED-TOP BASES L /4 X 1-1/2 L /16 X 2-1/16 L /4 X 1-11/16 46
47 BASE CAPS, THAT WITH A DADO, FIT COVED-TOP BASES THIS PAGE INTENTIONALLY LEFT BLANK 47
48 SYMMETRICAL MOULDINGS NOTE: UPON APPLICATION, THESE MAY NOT BE PERFECTLY SYMMETRICAL L /8 X 2-1/4 L X 3-1/2 L /16 X 2-7/16 L /16 X 3-1/8 L /16 X 2-7/16 L /16 X 2-1/2 L /4 X 2-5/8 L /16 X 2-1/2 L /4 X 2-5/8 L /16 X 2 L /8 X 3-3/8 L /16 X 3-3/8 L-2014 PATTERN IS 2 WIDE WORKS ON ANY WIDTH OR THICKNESS L /8 X 3-1/4 L-2145 PATTERN IS 2-1/2 WIDE WORKS ON ANY WIDTH OR THICKNESS 48
49 SYMMETRICAL MOULDINGS NOTE: UPON APPLICATION, THESE MAY NOT BE PERFECTLY SYMMETRICAL L /8 X 4-1/4 L /16 X 4-3/8 L /16 X 4 L /16 X 4-5/16 L /8 X 4-7/16 L /4 X 4-1/2 L /16 X 4-7/16 49
50 SYMMETRICAL MOULDINGS NOTE: UPON APPLICATION, THESE MAY NOT BE PERFECTLY SYMMETRICAL FORMERLY STOCK 4-3/8 FLUTED CASING L /4 X 4-3/8 L /16 X 4-5/8 L /16 X 4-1/4 L /4 X 4-1/8 L /4 X 4-3/8 L /8 X 3-1/2 L /16 X 5-1/2 L /4 X 5 CAN BE THINNER OR THICKER 50
51 SYMMETRICAL MOULDINGS NOTE: UPON APPLICATION, THESE MAY NOT BE PERFECTLY SYMMETRICAL L /4 X 5-1/2 L /4 X 4-7/8 L /8 X 4-9/16 L /16 X 5 L /16 X 5-3/8 L /16 X 1-1/4 L /8 X 2 L /8 X 1-11/16 L /4 X 1-3/8 L /16 X 2-1/16 51
52 SYMMETRICAL MOULDINGS NOTE: UPON APPLICATION, THESE MAY NOT BE PERFECTLY SYMMETRICAL L /8 X 2-1/2 L /16 X 2-7/16 L /4 X 4-1/4 L /2 X 1-3/4 L /8 X 5-1/4 L /8 X 4-7/16 L /16 X 5 L /4 X 2-1/2 L /4 X 2-1/4 L /16 X 2-9/16 L /16 X 3-7/16 52
53 SYMMETRICAL MOULDINGS NOTE: UPON APPLICATION, THESE MAY NOT BE PERFECTLY SYMMETRICAL R/T X 3-3/4--5 FLUTE MAX. CAN BE 3/8 WIDER EACH EDGE L-5073 L /4 X 5-1/2 L /4 X 5-1/2 L /4 X 4-1/2 L /8 X 1-1/2 L /8 X 5-3/8 L /4 X 5-5/16 L /4 X 4-7/16 L /4 X 5 53
54 SYMMETRICAL MOULDINGS NOTE: UPON APPLICATION, THESE MAY NOT BE PERFECTLY SYMMETRICAL L /4 X 4-1/2 FORMERLY STOCK STALLONE L /8 X 4-5/16 L /8 X 2-1/2 L /8 X 2-9/16 L /8 X 2-1/2 L /16 X 2-1/2 L /8 X 4-1/8 L /16 X 4 L /8 X 3-1/4 L /4 X 4-1/8 L /8 X 3-7/16 54
55 SYMMETRICAL MOULDINGS NOTE: UPON APPLICATION, THESE MAY NOT BE PERFECTLY SYMMETRICAL L /4 X 2-7/8 L /4 X 4-15/16 L /4 X 4-1/2 L /16 X 3-7/8 L /4 X 3-9/16 L /4 X 4-1/2 L /4 X 2-1/2 L /4 X 4-1/16 L /16 X 4-3/8 55
56 SYMMETRICAL MOULDINGS NOTE: UPON APPLICATION, THESE MAY NOT BE PERFECTLY SYMMETRICAL L /4 X 4-1/8 L X 4-3/8 L /4 X 4-1/2 CAN BE THICKER L /16 X 5 L /16 X 1-1/4 L /16 X 2-9/16 L /8 X 4-3/4 L /4 X 4-1/8 L /4 X 2-9/16 L /16 X 2 L /4 X 4-3/8 56
57 SYMMETRICAL MOULDINGS NOTE: UPON APPLICATION, THESE MAY NOT BE PERFECTLY SYMMETRICAL L /8 X 1-3/8 L /2 X 2-1/2 L /4 X 4-13/16 L /16 X 4-7/16 L /4 X 4-1/2 L X 4 (NOT SYMMENTRICAL) L /4 X 3-1/2 L /4 X 3 L /4 X 5-9/16 L /16 X 4-5/16 57
58 SYMMETRICAL MOULDINGS NOTE: UPON APPLICATION, THESE MAY NOT BE PERFECTLY SYMMETRICAL L /4 X 4-3/8 L /4 X 5-9/16 L /16 X 4-9/16 L /16 X 2-3/4 L /2 X 3-1/2 L /8 X 4-5/8 L /4 X 4-11/16 L /4 X 5 L /16 X 3 L /4 X 3-1/2 L /8 X 3-1/2 L /4 X 2-1/4 58
59 SYMMETRICAL MOULDINGS NOTE: UPON APPLICATION, THESE MAY NOT BE PERFECTLY SYMMETRICAL L /8 X 1-3/4 L /16 X 6-3/4 L /16 X 4-9/16 L /8 X 3-3/4 L /4 X 4-5/8 L /4 X 4 L /16 X 3-7/16 L /16 X 4-1/2 L /4 X 4-1/4 59
60 SYMMETRICAL MOULDINGS NOTE: UPON APPLICATION, THESE MAY NOT BE PERFECTLY SYMMETRICAL L /8 X 2-1/2 L /8 X 1-15/16 L /4 X 2-7/16 L /2 X 1-3/4 L /8 X 1-3/4 L /4 X 1-1/2 L /8 X 1-5/8 L /16 X 1-1/2 L /2 X 1-5/8 L /16 X 4-5/16 L /8 X 5 L /16 X 5-5/8 L /8 X 2-1/2 L /4 X 4-3/8 60
61 SYMMETRICAL MOULDINGS NOTE: UPON APPLICATION, THESE MAY NOT BE PERFECTLY SYMMETRICAL L X 4-1/2 L /4 X 3-1/2 L /4 X 1-9/16 L /16 X 4-9/16 L /8 X 4-1/4 L /16 X 3-7/16 L /8 X 4-15/16 L /16 X 4-7/8 L /4 x 3-7/16 L /2 X 3-13/16 L /4 X 2-1/2 61
62 SYMMETRICAL MOULDINGS NOTE: UPON APPLICATION, THESE MAY NOT BE PERFECTLY SYMMETRICAL L /16 X 3-15/16 L /16 X 5-1/2 L /4 X 2-1/2 L /8 X 2-5/8 L /4 X 2-1/2 L /8 X 3-7/16 L /16 X 2 L /2 X 2-13/16 62
63 SYMMETRICAL MOULDINGS NOTE: UPON APPLICATION, THESE MAY NOT BE PERFECTLY SYMMETRICAL THIS PAGE INTENTIONALLY LEFT BLANK 63
64 SYMMETRICAL MOULDINGS NOTE: UPON APPLICATION, THESE MAY NOT BE PERFECTLY SYMMETRICAL THIS PAGE INTENTIONALLY LEFT BLANK 64
65 SYMMETRICAL MOULDINGS NOTE: UPON APPLICATION, THESE MAY NOT BE PERFECTLY SYMMETRICAL THIS PAGE INTENTIONALLY LEFT BLANK 65
66 SYMMETRICAL MOULDINGS NOTE: UPON APPLICATION, THESE MAY NOT BE PERFECTLY SYMMETRICAL THIS PAGE INTENTIONALLY LEFT BLANK 66
67 STREAMLINE BASES L-2008 (NOT AN EDGE PATTERN) 5-3/4 MAX L-2030 NOT AN EDGE PATTERN 2 WIDE MAX L /2 X 3-3/4 MAX WIDTH (SPECIFY WIDTH WANTED) THIS IS BEST CHOICE FOR 1/2 S/L BASE L-2036 (NOT AN EDGE PATTERN) 3-5/8 MAX WIDTH MADE FOR FLOOR TRANSITION L X R/W (15/16 OK) L-2039 L /4 X 2-1/4 L-2105 (NOT AN EDGE PATTERN) 4 MAX WIDTH THE RADIUS BREAKS HERE L-2107 L /16 X 3-1/2 MAX WIDTH L /2 X 3-1/2 L /16 X 2-1/2 MAX WIDTH L /16 X 4-1/4 MAX WIDTH 67
68 STREAMLINE BASES THIS PAGE INTENTIONALLY LEFT BLANK 68
69 O.G. BASE L-2015 L-2103 L-2108 L-2048 L-2119 L-2052 L-2120 L-2055 L-2077 L-2128 L-2083 L-2130 L-2101 MATCH S 2-1/4 MDF BASE L-2063 MULLION FOR STOCK #5054 CASING L-2133 L
70 O.G. BASE L-2137 L-2155 L-2139 L-2158 L-2141 L-2086 L-2090 L-2162 FORMERLY 5-3/8 O.G. BASE L-2091 (STOCK KNIFE) L-2165 L-2146 L-2168 L-2150 L-2185 L-2151 L
71 O.G. BASE L-2190 L-2205 L-4029 L-2206 L-2191 L-2207 L-2192 L-2210 NOT AN EDGE PATTERN- 5-3/4 MAX WIDTH L /2 x 5-3/4 L-2193 L-2211 L-2194 L /16 X 2-1/4 L-2195 L /4 X 2-1/2 L-2201 L /8 X 1-3/8 L /2 MAX WIDTH L /4 X 3-1/2 71
72 O.G. BASE L-2217 L /8 X 2-1/4 L /4 X 3-1/2 L /4 X 1-7/16 L /4 X 3-1/2 L /16 X 4 L /8 X 1-9/16 72
73 O.G. BASE THIS PAGE INTENTIONALLY LEFT BLANK 73
74 O.G. BASE THIS PAGE INTENTIONALLY LEFT BLANK 74
75 BASES THAT ACCEPT A DADOED BASE CAP L MAX WIDTH L-2007 L-2018 L-2144 (ALSO FOR 1 X 4 DROP SIDING) L-2022 L-2166 L-2033 L-3118 L-2051 L-2066 L-2092 L
76 BASES THAT ACCEPT A DADOED BASE CAP THIS PAGE INTENTIONALLY LEFT BLANK 76
77 BASES/CASINGS/TRIMS--2-1/2 MAX (NOT AN EDGE PATTERN) L /2 X 2-1/2 L /16 X 2-3/8 FORMERLY 2-3/8 BEADED FIR L /16 X 1-3/4 L /16 X 2-3/8 L /8 X 2-3/8 L /16 X 2-3/8 L /8 X 2-7/16 L /8 X 2-3/8 L /16 X 1-3/4 L /16 X 2-3/8 L /16 X 1-5/8 L /16 X 2-3/8 L /4 X 2-1/2 L /8 X 2-7/16 L /16 X 1-3/4 L /16 X 2-7/16 L /16 X 2-3/8 77
78 BASES/CASINGS/TRIMS--2-1/2 MAX L /16 X 3 L /4 X 2-1/2 L /16 X 2-7/16 L /16 X 2-3/4 L /4 X 2-7/16 L /8 X 2-3/8 L /8 X 2-3/8 L /8 X 2-1/2 L /16 X 2-7/16 L /16 X 2 L X 2-1/2 L /16 X 2-3/8 L /16 X 2-7/16 L /8 X 2-1/2 L /8 X 2-1/4 L /4 X 2-1/2 78
79 BASES/CASINGS/TRIMS--2-1/2 MAX L /4 X 2-1/2 L /4 X 2-7/8 L /16 X 2-1/8 L /4 X 2-1/4 L /4 X 2-1/4 L /8 X 2 L /16 X 1-5/8 L /4 X 1-5/8 L /4 X 2-1/4 L /16 X 1-13/16 FORMERLY STOCK HERITAGE FORMERLY 5/8 X 2-3/8 CALYPSO L /8 X 2-3/8 L /8 X 2-3/8 L /16 X 2-1/8 FORMERLY STOCK 2-3/8 STEP L /16 X 2-5/16 L /16 X 2-1/4 L /8 X 2-1/8 L /16 x 1-7/8 79
80 BASES/CASINGS/TRIMS--2-1/2 MAX L /4 X 1-7/8 L /16 X 2-5/8 L /8 X 2-1/2 L /4 X 1-1/2 L /4 X 1-5/8 L /4 X 1-3/4 L /4 X 1-5/8 L /4 X 2 L /4 X 2-1/8 L /8 X 2-1/4 L /16 X 2-1/4 L /16 X 2-1/4 L /16 X 2-3/8 L /2 X 1-7/16 L /4 X 2-1/16 L /8 X 2 80
81 BASES/CASINGS/TRIMS--2-1/2 MAX L /16 X 2-1/16 L /4 X 1-3/4 L /2 X 1-9/16 L /4 X 2 L /8 X 2-1/8 L /8 X 2 L /4 X 1-3/4 L /16 X 1-5/8 L X 2-3/8 L /16 X 1-5/8 L /16 X 1-3/4 L /16 X 2-7/8 L /4 X 1-3/8 L /4 X 2 L /4 X 2-1/4 L /16 X 2-3/16 81
82 BASES/CASINGS/TRIMS--2-1/2 MAX L /8 X 1-5/8 L /4 X 1-11/16 L /8 X 2-5/8 L /8 X 2-1/4 L /16 X 2-1/2 L X 2-5/16 L /4 X 1-9/16 L /8 X 1-3/4 L /16 X 2-1/4 L /16 X 2 L /16 X 2-1/4 L /8 X 1-3/4 L /16 X 2-1/8 L /16 X 2-1/2 L /4 X 2-1/4 L /4 X 2-1/2 82
83 BASES/CASINGS/TRIMS--2-1/2 MAX L /16 X 1-3/4 L /8 X 1-5/8 FORMERLY 2-3/8 STREAMLINE CASING L /16 X 2-5/16 L /4 X 2 L /16 X 2-1/2 L /16 X 1-7/8 L /4 X 3 L /4 X 2-1/4 L /4 X 2 L /4 X 1-3/4 L /4 X 1-5/8 L /8 X 1-11/16 L /8 X 1-5/8 L /4 X 2-7/16 L /4 X 1-9/16 L /16 X 1-5/8 L /16 X 2-1/4 83 L /16 X 2-1/4
84 BASES/CASINGS/TRIMS--2-1/2 MAX L X 2-3/16 L /8 X 2-1/4 L /16 X 2-7/16 L /8 X 2-1/2 L /4 X 2 L /4 X 2-1/2 L /4 X 1-7/8 L X 2-1/2 L /16 X 2-1/2 L /16 X 2-5/16 L /4 X 2-1/4 L /8 X 1-13/16 L /4 X 2-1/2 L /8 X 2 L /2 X 2-3/16 L /4 X 1-5/8 L /16 X 2-1/8 L /2 X 1-9/16 L /4 X 2-1/4 84
85 BASES/CASINGS/TRIMS--2-1/2 MAX L /8 X 2-1/2 L /4 X 3-1/4 L /4 X 2-1/16 L /4 X 2-3/8 L /8 X 1-11/16 L /4 X 2 L /8 X 1-3/4 L /8 X 1-5/8 L /4 X 2-1/2 L /16 X 1-1/2 L /16 X 1-11/16 L /16 X 2-1/4 L /4 X 1-5/8 L /4 X 2-3/8 L /4 X 1-5/8 L /4 X 2-1/2 L /8 X 1-9/16 L /4 X 2 L X 1-1/2 L /4 X 2-1/2 85
86 BASES/CASINGS/TRIMS--2-1/2 MAX L /4 X 2-5/16 L /4 X 1-5/16 L /16 X 2-1/8 L /16 X 2-1/2 L /16 X 2-1/4 L /4 X 2 L /16 X 2-1/2 L /8 X 2-1/2 L /4 X 2-1/2 L /16 X 1-9/16 L /2 X 2-1/2 L /8 X 2-1/2 L /8 X 2-3/8 L /8 X 2-1/16 L /4 X 1-5/8 L /16 x 1-3/8 L /8 X 2 L /16 X 2-1/2 L /4 X 2-1/2 L /16 X 2 86
87 BASES/CASINGS/TRIMS--2-1/2 MAX L /4 X 2-1/2 L /8 X 1-9/16 L /2 X 2-1/8 L /16 X 2 L /16 X 1-5/8 L /8 X 2-1/2 L /16 X 2-1/8 L /4 X 2-1/2 L /4 X 2 L /16 X 2 L /4 X 2-1/4 L /16 X 2-3/8 L /4 X 2-7/16 L /4 X 1-13/16 L /16 X 1-5/8 L /4 X 1-9/16 L /4 X 2-1/2 L /8 X 2-1/4 L X 2 L /4 X 2-1/2 87
88 BASES/CASINGS/TRIMS--2-1/2 MAX L /16 X 2 L /4 X 1-3/4 L /16 X 2-1/2 L /16 X 1-3/8 L /8 X 1-11/16 L /2 X 2-3/16 L /4 X 1-5/8 L /4 X 2-1/2 L /16 X 1-5/8 L /16 X 2 L /2 X 2-1/2 L /8 X 2-1/16 L /16 X 2-7/16 L /4 X 2-1/2 L /4 X 2-1/8 L /8 X 2-1/2 L /8 X 2-1/2 L /16 X 2-1/4 L /16 X 2-1/4 L /4 X 1-5/8 L /4 X 2-1/4 88
89 BASES/CASINGS/TRIMS--2-1/2 MAX L /2 X 1-3/4 L /8 X 2-1/2 L /16 X 2-1/2 L /4 X 2-1/2 L /16 X 1-3/8 L /8 X 1-3/16 L X 2-1/2 L /4 X 2-1/2 L /16 X 2-3/8 L /16 X 1-5/8 L /8 X 2 L /4 X 2-1/4 L /4 X 2-1/2 L /16 X 1-11/16 L /16 X 1-5/8 L /4 X 1-5/8 L /16 X 1-9/16 L /4 X 2-1/2 L /8 X 2-1/4 L /8 X 2-1/2 89
90 BASES/CASINGS/TRIMS--2-1/2 MAX L /4 x 2-1/2 L /16 X 1-5/8 L /16 X 2-1/4 L /4 X 2-1/4 90
91 BASES/CASINGS/TRIMS--2-1/2 MAX THIS PAGE INTENTIONALLY LEFT BLANK 91
92 BASES/CASINGS/TRIMS--2-1/2 MAX THIS PAGE INTENTIONALLY LEFT BLANK 92
93 BASES/CASINGS/TRIMS--2-1/2 MAX THIS PAGE INTENTIONALLY LEFT BLANK 93
94 BASES/CASINGS/TRIMS--3-1/2 MAX L /16 X 3-1/8 L /16 X 3-3/8 L /8 X 3-3/8 L /16 X 3-7/16 L /8 X 3-3/8 L /4 X 3-7/16 L /16 X 3-5/16 L /16 X 3-7/16 L /16 X 3-5/16 L /16 X 3-3/8 L /16 X 3-3/8 L /16 X 3-1/4 94
95 BASES/CASINGS/TRIMS--3-1/2 MAX L /16 X 3 L /8 X 3-3/8 L /16 X 3-7/16 L /16 X 3 MDF ONLY L /16 X 3 L /16 X 3-1/2 L /4 X 3-3/8 L /16 X 3-1/2 L X 2-5/8 L /16 X 3-1/2 (NOT AN EDGE PATTERN) MDF ONLY L /4 X 3-1/4 L /8 X 3-3/8 95 L /4 X 3-1/2
96 BASES/CASINGS/TRIMS--3-1/2 MAX FORMERLY STOCK 3-3/8 STEP L /16 X 3-1/4 L /4 X 2-9/16 FORMERLY OG BASE/CASING FORMERLY STOCK 3-3/8 S/L CASING L /16 X 3-3/8 L /4 X 3-1/2 L /4 X 2-1/2 L /16 X 3-1/4 L /4 X 3-1/2 L /4 X 3 L /4 X 3-1/2 L /16 X 3-1/4 L /8 X 2-5/8 L X 3-3/8 L /8 X 2-7/8 96 L /16 X 2-1/2
97 BASES/CASINGS/TRIMS--3-1/2 MAX L /4 X 2-1/2 L /8 X 2-7/8 L /8 X 3-3/8 L /16 X 3-3/8 L /8 X 2-5/8 L /8 X 3-1/4 L /4 X 3-3/8 L /8 X 3-3/8 L /16 X 3-1/2 L /8 X 2-5/8 L /16 X 3-3/8 L /16 X 3-3/8 L /4 X 2-9/16 L /8 X 3-3/8 97
98 BASES/CASINGS/TRIMS--3-1/2 MAX L /8 X 2-5/8 L /16 X 3-1/2 L /16 X 3-1/2 L /4 X 3-1/2 L /16 X 3-7/16 L /4 X 3 L /4 X 3-1/2 L /8 X 3-3/8 L /4 X 3 L /4 X 3 L /8 X 3-1/8 L /16 X 2-1/2 L /4 X 3-1/2 98 L /4 X 3
99 BASES/CASINGS/TRIMS--3-1/2 MAX L /16 X 2-1/2 MDF ONLY L X 3-1/2 L /16 X 2-3/4 L /16 X 3-1/2 L /8 X 2-5/8 L /4 X 2-9/16 L /8 X 2-1/2 L /16 X 3-1/2 L /4 X 3-1/2 L /4 X 3 L /16 X 3-3/8 L /4 X 3-1/4 L /4 X 2-1/2 L /16 X 3-3/16 L /8 X 3-1/2 L /16 X 2-1/2 99
100 BASES/CASINGS/TRIMS--3-1/2 MAX L /8 X 3-3/8 L /4 X 3-1/2 L /16 X 2-1/2 L X 3-1/2 MDF ONLY L /4 X 2-3/4 L /16 X 3-1/4 L /8 X 2-1/2 L /16 X 2-11/16 L /16 X 2-9/16 L /8 X 3-5/16 L /4 X 2-9/16 L /8 X 3-3/8 L /4 X 2-1/2 L /16 X 3-3/16 L /8 X 2-11/16 MDF ONLY 100
101 BASES/CASINGS/TRIMS--3-1/2 MAX L /16 X 3 L /4 X 2-13/16 L /4 X 3-1/2 L /16 X 3-5/16 L /4 X 2-3/4 L /4 X 3-1/2 L /4 X 3-1/4 L /4 X 3-1/2 L /8 X 3-5/16 L /4 X 3-1/4 L /8 X 2-7/8 L /8 X 3-7/16 L /16 X 3-1/2 L /16 X 3-1/16 L /4 X 3-1/2 L /4 X 2-9/16 101
102 BASES/CASINGS/TRIMS--3-1/2 MAX L /4 X 3-1/2 L /16 X 2-9/16 L /16 X 3-3/16 L /16 X 3-1/2 L X 2-9/16 L /8 X 3 L /4 X 3-1/4 L /4 X 3-1/2 L /16 X 3-1/2 L /4 X 2-5/8 L /4 X 2-9/16 L /8 X 3-1/2 L /16 X 3-1/2 L /4 X 3 L /4 X 3-1/16 L /16 X 2-5/8 L /4 X 3-1/2 L X 3 102
103 BASES/CASINGS/TRIMS--3-1/2 MAX L /8 X 3-3/16 L /8 X 2-9/16 L /8 X 3-1/4 L /4 X 2-9/16 L /16 X 2-9/16 L /8 X 2-13/16 L /4 X 2-11/16 L /4 X 2-3/4 L /4 X 3-1/2 L /8 X 3-1/4 L /4 X 2-9/16 L /4 X 3-1/2 (NOT STOCK STEP CASING) L /8 X 3-1/8 L /16 X 3-1/2 L /16 X 3-1/2 L /16 X 3-1/4 L /4 X 3-5/16 L /4 X 3-3/8 103
104 BASES/CASINGS/TRIMS--3-1/2 MAX L X 2-11/16 L /16 X 3-7/16 L /4 X 3-7/16 L /8 X 3-1/2 L /8 X 3 L /4 X 3-1/2 L /4 X 3-1/2 L /8 X 2-11/16 L /8 X 3 L /16 X 3-3/8 L /16 X 3-1/16 L /8 X 3-1/8 L /2 X 3-1/2 L /8 X 3-1/2 L /4 X 3 L /8 X 3-1/4 L /16 X 3 104
105 BASES/CASINGS/TRIMS--3-1/2 MAX L /16 X 3-1/2 L /16 X 3-1/2 L /4 X 3-1/2 L /4 X 3-1/2 L /4 X 3-1/4 L /16 X 3-1/4 L /16 x 3-1/2 L /4 X 3-1/2 L /4 X 3-1/2 L /4 X 2-13/16 L /8 X 3-1/2 L /2 X 3 L /16 X 3-3/8 L /4 X 3-3/8 L /2 X 3-1/2 L /4 X 2-3/4 L /16 X 3-1/2 105
106 BASES/CASINGS/TRIMS--3-1/2 MAX L /4 X 2-5/8 L /8 X 3-1/2 L /16 X 2-3/4 L /4 X 3-5/16 L /16 X 3 L /4 X 3-1/2 L /16 X 3-1/2 L /16 X 3-1/2 L /8 X 3-1/4 MDF ONLY L /4 X 2-15/16 L /16 X 3-1/2 L /4 X 3-1/2 L /16 X 3-1/2 L /4 X 3-9/16 L /4 X 3-3/16 L /4 X 2-5/8 L /16 X 3-1/2 L /4 X 3-3/8 L /16 X 3-1/2 106
107 BASES/CASINGS/TRIMS--3-1/2 MAX L /2 X 3-1/2 L /4 X 3-1/2 L /4 X 3-1/2 L /4 X 2-3/4 L /16 X 3-7/16 L /2 X 3-1/2 L /16 X 3-1/4 L /8 X 3-1/4 L /4 X 3-1/2 L /4 X 3-1/2 L /8 X 3 L /4 X 3-1/16 L /4 X 3-1/2 L /8 X 3-1/16 L /4 X 3-1/2 L /4 x 3-1/2 L /4 X 2-3/4 L /4 X 3-5/16 L /8 X 3-1/2 107 L /16 X 3-1/4
108 BASES/CASINGS/TRIMS--3-1/2 MAX L /16 X 3-1/2 L /16 X 2-15/16 L X 3-1/2 MDF ONLY L /16 X 3-7/16 L /8 X 3-3/8 L /16 X 3-1/2 L /16 X 3-7/16 L /2 X 3-1/2 L /16 X 3-3/8 L /4 X 3-7/16 L /4 X 3 L /8 X 3-1/2 L /8 X 2-11/16 L /16 X 3-3/16 L /16 X 3 L /4 X 2-9/16 L /16 X 3-1/4 L /16 X 3-3/8 108
109 BASES/CASINGS/TRIMS--3-1/2 MAX L /4 X 3-1/2 L /4 X 3-9/16 L /4 X 3-9/16 L /4 X 3-7/16 L /16 X 3-1/4 L /4 X 2-13/16 L /4 X 2-3/4 L /16 X 2-9/16 L X 3-1/2 L /4 X 3-1/2 L /4 X 3-1/2 L /4 X 3-1/2 L /16 X 3-1/4 L /16 X 2-7/8 L /16 X 3-1/2 L /16 X 3-1/8 L /16 X 3-1/8 L /4 X 3 109
110 BASES/CASINGS/TRIMS--3-1/2 MAX L /8 X 3-1/4 L /16 X 2-3/4 L /16 X 3-5/16 L /16 X 3-1/2 L /8 X 3-5/16 L /4 X 3-3/8 L /8 X 3-1/4 L /4 X 3-1/2 L /8 X 3-1/2 L /8 X 3-1/2 L /8 X 2-13/16 L /8 X 3-1/2 L /16 X 2-9/16 L /4 X 3-7/16 L /16 X 2-5/8 L /16 X 3-7/16 L /16 X 3-1/2 L /4 X 3-1/8 110
111 BASES/CASINGS/TRIMS--3-1/2 MAX THIS PAGE INTENTIONALLY LEFT BLANK 111
112 BASES/CASINGS/TRIMS--3-1/2 MAX THIS PAGE INTENTIONALLY LEFT BLANK 112
113 BASES/CASINGS/TRIMS--3-1/2 MAX THIS PAGE INTENTIONALLY LEFT BLANK 113
114 BASES/CASINGS/TRIMS--3-1/2 MAX THIS PAGE INTENTIONALLY LEFT BLANK 114
115 BASES/CASINGS/TRIMS--4-1/2 MAX L /4 X 3-3/4 L /16 X 4-3/8 L /16 X 4-1/4 L /16 X 4-3/8 L /16 X 4-5/16 L /16 X 4 L /4 X 4-7/16 115
116 BASES/CASINGS/TRIMS--4-1/2 MAX L /16 X 4-3/8 L /16 X 3-7/8 L /16 X 4 L /16 X 3-3/4 MDF ONLY L /16 X 4-1/4 L /16 X 3-5/8 MDF ONLY L /16 X 3-5/8 116
117 BASES/CASINGS/TRIMS--4-1/2 MAX L /4 X 4-7/16 L /16 X 4 L /4 X 4-1/4 MDF ONLY L X 4 L /16 X 4 L /4 X 4-1/8 L /16 X 3-9/16 MDF ONLY L /8 X 3-3/4 117
118 BASES/CASINGS/TRIMS--4-1/2 MAX L /4 X 3-9/16 L /4 X 4-1/8 L /16 X 3-5/8 L /16 X 3-7/8 L /16 X 3-1/2 L /8 X 3-9/16 1-1/4 MDF ONLY (S/O) L /4 X 4-1/2 118
119 BASES/CASINGS/TRIMS--4-1/2 MAX L /8 X 4-1/4 L /4 X 4-7/8 L /8 X 3-3/4 L /8 X 4-1/4 L /8 X 3-1/2 L /4 X 3-5/8 L /8 X 3-5/8 119 L /4 X 4-1/2
120 BASES/CASINGS/TRIMS--4-1/2 MAX L /8 X 3-5/8 L /8 X 3-5/8 L /4 X 4-1/4 L /16 X 4-5/16 L X 4-1/4 MDF OR CEDAR ONLY L /8 X 4 L /16 X 4-1/2 L /16 X 4-3/8 120
121 BASES/CASINGS/TRIMS--4-1/2 MAX L /16 X 4-3/8 L /16 X 3-5/8 L /4 X 4-1/4 L X 3-3/4 L /16 X 4 L /8 X 4-3/8 L /4 X 4 121
122 BASES/CASINGS/TRIMS--4-1/2 MAX L /4 X 4-1/2 L /4 X 3-5/8 L /16 X 4 L /16 X 3-3/4 L /4 X 3-3/4 L /16 X 3-9/ L /16 X 4-1/16
123 BASES/CASINGS/TRIMS--4-1/2 MAX L X 3-5/8 L /16 X 4-1/2 L /16 X 5 L /4 X 4 L /4 X 4-1/2 L /4 X 3-9/16 L /4 X 4 L /8 X 3-5/8 L /8 X 4 123
124 BASES/CASINGS/TRIMS--4-1/2 MAX L /4 X 3-9/16 L /16 X 3-9/16 L /8 X 4-3/8 L /4 X 4-1/2 L /16 X 4-7/16 MDF ONLY L /4 X 3-1/2 MDF ONLY L X 4-1/2 L /4 X 4-1/4 L /8 X 5-3/8 L /4 X 3-1/2 124
125 BASES/CASINGS/TRIMS--4-1/2 MAX L /4 X 3-9/16 L /4 X 4-3/8 L /16 X 3-11/16 L /8 X 4-3/8 L /16 X 4-3/8 L /4 X 4-7/16 L /16 X 4-3/8 125 L /4 X 4-3/8
126 BASES/CASINGS/TRIMS--4-1/2 MAX L /8 X 4-3/8 MDF ONLY L /4 X 4 L /4 X 4-1/2 L X 4-1/8 L /8 X 4-1/2 L /4 X 4-3/8 L /4 X 3-9/16 L /4 X 3-3/4 126
127 BASES/CASINGS/TRIMS--4-1/2 MAX L /4 X 4 L /4 X 4-5/16 L /16 X 4-1/2 L /16 X 3-5/8 L /4 X 3-5/8 L /4 X 4-1/2 L /4 X 3-7/8 L /8 X 3-7/8 L /4 X 4-1/2 L /4 X 4-3/8 127
128 BASES/CASINGS/TRIMS--4-1/2 MAX L /4 X 4-1/2 L /4 X 4-15/16 L /4 X 4-3/8 L /4 X 4-7/16 L /4 X 4 L /4 X 4-7/16 L /8 X 4-1/2 L /16 X 4-9/16 L /4 X 4-1/2 128
129 BASES/CASINGS/TRIMS--4-1/2 MAX L /16 X 4-1/8 L /4 X 4-1/2 L /16 X 3-9/16 L /8 X 4-1/8 L /8 X 4-7/8 MDF ONLY L /16 X 4-7/16 L /16 X 3-3/4 L /16 X 3-5/8 129 L /16 X 3-9/16
130 BASES/CASINGS/TRIMS--4-1/2 MAX L /16 X 4-1/4 L /4 X 3-3/4 L /16 X 4-7/16 L /16 X 4-5/16 L /4 X 4-1/2 L /2 X 4-3/16 L /4 X 4 L /4 X 4-7/16 L /4 X 3-9/16 L /16 X 4-1/2 130 L /4 X 3-5/8
131 BASES/CASINGS/TRIMS--4-1/2 MAX L /16 X 3-1/2 L /4 X 4-7/16 L /16 X 4-5/16 L /16 X 4-3/8 L /4 X 4-1/2 L /2 X 4-1/2 L /4 X 4-3/8 L /4 X 4 L X 4-3/8 131
132 BASES/CASINGS/TRIMS--4-1/2 MAX L /16 X 3-15/16 L /4 X 4-1/2 L /16 X 3-5/8 L /16 X 3-9/16 L /8 X 3-7/8 L /8 X 3-7/8 L /16 X 3-5/8 L /4 X 4-3/8 L /16 X 4-9/16 L /16 X 4-1/2 132
133 BASES/CASINGS/TRIMS--4-1/2 MAX L /8 X 3-3/4 L /16 X 4-1/4 L /8 X 4-1/4 L /2 X 4-1/4 L /8 X 4-1/4 L /2 X 4-1/4 L /4 X 4-3/8 L /4 X 4-1/4 L /2 X 4-1/2 L /16 X 3-5/8 133
134 BASES/CASINGS/TRIMS--4-1/2 MAX L /16 X 3-9/16 L /16 X 4-7/16 L /16 X 4-1/2 L /8 X 4 L /8 X 4-1/2 L /4 X 4-5/16 L /4 X 3-11/16 L /8 X 3-9/16 L /8 X 4-7/ L /16 X 3-9/16
135 BASES/CASINGS/TRIMS--4-1/2 MAX L /16 X 4-1/2 L /16 X 3-9/16 L /16 X 4-1/16 L /16 X 4-7/16 L /2 X 3-13/16 L /16 X 4-1/2 MDF ONLY L /4 X 4-5/16 L /16 X 4 L /2 X 3-11/16 L /8 X 4-1/2 135 L /16 X 4-1/2
136 BASES/CASINGS/TRIMS--4-1/2 MAX L /16 X 4 L /16 X 3-9/16 L /4 X 3-9/16 L /4 X 3-11/16 L /4 X 5-7/16 L /4 X 4-1/2 L /4 X 4-1/2 L /4 X 4-1/4 L /4 X 4-1/4 136
137 BASES/CASINGS/TRIMS--4-1/2 MAX L /16 X 4-1/2 L /4 X 4-1/2 L /16 X 4 L /4 X 4-1/4 L /4 X 4-1/2 L /4 X 3-5/8 L /16 X 4-1/2 L /8 X 3-3/4 L /4 X 3-3/4 137 L /2 X 4-1/8
138 BASES/CASINGS/TRIMS--4-1/2 MAX l /4 x 4 L X 4-1/2 L /4 X 4-3/8 L /8 X 4-5/16 L /4 X 4-1/8 L /8 X 4-1/2 L /4 X 3-9/16 L X 4 138
139 BASES/CASINGS/TRIMS--4-1/2 MAX L /4 X 4-1/2 L /4 X 4-1/2 L /16 X 3-3/4 L /2 X 4 L /4 X 4-1/2 L /8 X 4 L /4 X 4-1/8 L /8 X 3-3/4 L /4 X 4-1/16 139
140 BASES/CASINGS/TRIMS--4-1/2 MAX L /2 X 4 140
141 BASES/CASINGS/TRIMS--4-1/2 MAX THIS PAGE INTENTIONALLY LEFT BLANK 141
142 BASES/CASINGS/TRIMS--4-1/2 MAX THIS PAGE INTENTIONALLY LEFT BLANK 142
143 BASES/CASINGS/TRIMS--4-1/2 MAX THIS PAGE INTENTIONALLY LEFT BLANK 143
144 BASES/CASINGS/TRIMS--4-1/2 MAX THIS PAGE INTENTIONALLY LEFT BLANK 144
145 BASES/CASINGS/TRIMS--4-5/8 & WIDER L /16 X 4-5/8 ANY WIDTH L /4 X R/W L /4 X 5-3/8 L X 4-5/8 ANY WIDTH L /16 X R/W L X 4-3/4 L /16 X 4-1/2 145
146 BASES/CASINGS/TRIMS--4-5/8 & WIDER L /16 X 5-1/4 L /4 X 4-9/16 L /16 X 5-3/8 L /16 X 5-1/8 L /4 X 4-1/2 L /8 X 4-5/8 146
147 BASES/CASINGS/TRIMS--4-5/8 & WIDER L /4 X 5-1/4 L /16 X 4-1/2 L X 5 L /16 X 7 MAX NARROWER OK L /4 X 5 L /8 X 5-1/8 MDF ONLY ( IF AVAILABLE) 147
148 BASES/CASINGS/TRIMS--4-5/8 & WIDER L /16 X 4-1/2 L /16 X 4-3/4 L X 4-1/2 MDF ONLY L /4 X 4-1/2 L /8 X 7-1/8 L /4 X 4-3/8 L /8 X 5-3/8 L /16 X 4-9/16 148
149 BASES/CASINGS/TRIMS--4-5/8 & WIDER L /4 X 5-1/2 L /16 X 4-5/8 (PLYNTH FOR #5007) L /4 X 4-5/8 L /8 X 6-1/2 L /8 X 4-7/8 L /8 X 7-1/8 L /4 X 4-5/8 L /4 X 5-1/2 L /4 X 5-1/2 149
150 BASES/CASINGS/TRIMS--4-5/8 & WIDER L /4 X 4-3/4 L /16 X 5-1/4 L /4 X 5-1/8 L /4 X 5-9/16 L /8 X 5-1/2 L /16 X 5-3/8 L /4 X 7-7/16 L /16 X 5-1/2 L /16 X 7-3/8 L /8 X 5-1/16 150
151 BASES/CASINGS/TRIMS--4-5/8 & WIDER L /4 X 5-1/4 L /16 X 5-1/4 L /8 X 5-9/16 THIS PROFILE WAS ORIGINALLY 3/4 X 8. DUE TO MATERIAL ISSUES AND MILLING ISSUES, THE MAXIMUM SIZE IS NOW 11/16 + X 7-1/8 L /16 X 7-1/8 L /16 X 6-13/16 L /16 X 5-1/4 L /4 X 4-5/8 L /16 X 4-5/8 L /16 X 5-1/2 151
152 BASES/CASINGS/TRIMS--4-5/8 & WIDER L /8 X 6-7/8 L /16 X 5 L /4 X 5-3/8 L /8 X 5-11/16 L /8 X 4-11/16 L /4 X 7-5/8 L /4 X 4-5/8 L /16 X 5-3/16 MDF ONLY L /16 X 5-1/8 152
153 BASES/CASINGS/TRIMS--4-5/8 & WIDER L /4 X 7-3/16 L /4 X 5-3/8 L /4 X 5-7/16 L /8 X 5-1/2 L /4 X 6-3/4 L /8 X 5-1/4 L /4 X 4-7/8 L /16 X 6 L /4 X 7-1/4 L /4 X 7-3/8 153
154 BASES/CASINGS/TRIMS--4-5/8 & WIDER L /16 X 7 L /16 X 7-1/8 L /2 X 5-1/4 L /16 X 5-1/4 L /8 X 5 L /16 X 5-3/8 L /4 X 5-3/8 L /4 X 4-15/16 L /8 X 4-3/4 L /4 X 4-5/8 154
155 BASES/CASINGS/TRIMS--4-5/8 & WIDER L /16 X 5 L /16 X 7 L /16 X 4-5/8 MDF ONLY L X 5-3/8 MDF ONLY L /4 X 5-3/8 L /4 X 4-7/8 L /8 X 4-15/16 L /4 X 4-7/8 L /4 X 6-3/4 155
156 BASES/CASINGS/TRIMS--4-5/8 & WIDER L /4 X 4-7/8 L /16 X 7-1/8 L /2 X 5-7/16 L /16 X 4-3/4 L /8 X 5-1/8 L /8 X 5-1/2 L /16 X 4-15/16 L /16 X 5-1/4 L /16 X 4-1/2 L /8 X 5-1/4 156
157 BASES/CASINGS/TRIMS--4-5/8 & WIDER L X 5-3/8 L /16 X 5-1/4 L /16 X 5-3/4 L /2 X 4-3/4 L /8 X 5-9/16 L /4 X 5-1/2 L /16 X 4-9/16 L /2 X 5 L /4 X 5-1/2 L /4 X 4-3/4 157
158 BASES/CASINGS/TRIMS--4-5/8 & WIDER L /16 X 4-3/4 L /16 X 5 L /8 X 5-1/2 L /16 X 7-1/4 L /4 X 7-1/4 L /16 X 5-5/8 L /16 X 5 L /8 X 6 L /16 X 5-1/16 L /8 X 5-1/2 158
159 BASES/CASINGS/TRIMS--4-5/8 & WIDER L /4 X 6-1/2 L /8 X 4-15/16 L /16 X 7-1/8 159
160 BASES/CASINGS/TRIMS--4-5/8 & WIDER THIS PAGE INTENTIONALLY LEFT BLANK 160
161 BASES/CASINGS/TRIMS--4-5/8 & WIDER THIS PAGE INTENTIONALLY LEFT BLANK 161
162 BASES/CASINGS/TRIMS--4-5/8 & WIDER THIS PAGE INTENTIONALLY LEFT BLANK 162
163 BASES/CASINGS/TRIMS--4-5/8 & WIDER THIS PAGE INTENTIONALLY LEFT BLANK 163
164 BRICKMOULD (ALSO SEE CORNICE MOULD) L /16 X R/W L /4 X 2 L /8 X R/W L /16 X 2-7/8 L /8 X 2-1/8 L /16 X 2-3/8 L /8 X 2-1/8 L /16 X 2 L /4 X 1-1/2 164
165 BRICKMOULD (ALSO SEE CORNICE MOULD) L /8 X 1-3/8 L /16 X 2-1/8 L /8 X 2 L /4 X 2 L /16 X 3 L /8 X 2-3/8 L /8 X 2-1/4 NOW IN STOCK L /8 X 1-5/8 L /4 X 2-1/2 L x 2-3/16 (CAN BE THINNER) 165
166 BRICKMOULD (ALSO SEE CORNICE MOULD) L /16 X 2-1/4 L /16 X 2 L /4 X 1-9/16 L /16 X 1-3/4 L /16 X 1-3/4 L /16 X 2-5/8 L /8 X 3-3/8 L /4 X 2 L /16 X 1-15/16 L /4 X 1-1/2 L /8 X 2-7/16 L /16 X 3-1/2 166
167 BRICKMOULD (ALSO SEE CORNICE MOULD) L /4 X 2 l /16 x 2 L /16 X 2-1/4 L /16 X 1-13/16 L /16 X 2-1/4 L /16 X 2-1/2 L /4 X 2 L /8 X 1-3/4 L /16 X 2-1/4 L /16 X 2-1/8 L /16 X 2 L /16 X 1-1/2 167
168 BRICKMOULD (ALSO SEE CORNICE MOULD) L /16 X 2-7/16 L /16 X 2 L /8 X 2 L /4 X 1-5/8 L /16 X 2-3/4 L /16 X 1-5/8 L /8 X 2-1/2 L /16 X 3-1/8 L /8 X 2 L /8 X 3-1/8 L /16 X 2-7/8 L /16 X 2-7/16 168
169 BRICKMOULD (ALSO SEE CORNICE MOULD) L /16 X 2-1/2 L /16 X 2 169
170 BRICKMOULD (ALSO SEE CORNICE MOULD) THIS PAGE INTENTIONALLY LEFT BLANK 170
171 BRICKMOULD (ALSO SEE CORNICE MOULD) THIS PAGE INTENTIONALLY LEFT BLANK 171
172 BRICKMOULD (ALSO SEE CORNICE MOULD) THIS PAGE INTENTIONALLY LEFT BLANK 172
173 CORNICE MOULD (ALSO SEE BRICK MOULD) IN STOCK L X 2 L /16 X 1-5/16 L /8 X 2-3/8 L /16 X 1-7/16 L /8 X 1-7/16 L /8 X 1-5/8 L /8 X 2 L /16 X 1-3/4 L /8 X 1-1/8 L /8 X 2-3/8 173
174 CORNICE MOULD (ALSO SEE BRICK MOULD) L /16 X 1-1/2 L /4 X 1-1/2 L X 1-1/4 L /16 X 3-3/8 L /16 X 1-1/4 L /16 X 2-3/16 L /4 X 2-3/8 L /8 X 2-7/16 L /4 X 1-5/8 L /16 X 3-1/8 174
175 CORNICE MOULD (ALSO SEE BRICK MOULD) L /8 X 1-3/8 L X 3 L /2 X 3-1/8 L /16 X 2-1/8 L /4 X 3-1/4 L /16 X 1-3/4 L /4 X 2 L /16 X 2-1/8 175
176 CORNICE MOULD (ALSO SEE BRICK MOULD) L /16 X 2-1/8 L /16 X 2-3/4 L /8 X 2-5/8 L /16 X 2-5/16 L /4 X 2-7/8 L /2 X 3-7/16 L /16 X 2 L /8 X 2-1/4 L /8 X 2-3/4 L /16 X 2-7/16 176
177 CORNICE MOULD (ALSO SEE BRICK MOULD) L /16 X 1-5/16 L /4 X 3-3/8 L /8 X 2 L /16 X 1-7/8 L /16 X 2-13/16 L /4 X 2-1/4 L /16 X 2-7/16 L /8 X 2 L /16 X 3-9/16 L /8 X 3-7/16 177
178 CORNICE MOULD (ALSO SEE BRICK MOULD) L /16 X 2-13/16 L /8 X 2-5/8 L /16 X 2-3/4 L /4 X 2 L /8 X 1-5/8 L /8 X 1-11/16 L /8 X 2-3/8 L /16 X 3-5/16 L /16 X 2-3/8 L /16 X 1-3/8 L /4 X 2-1/2 178
179 CORNICE MOULD (ALSO SEE BRICK MOULD) L /16 X 1-3/4 L /8 X 2-7/8 L /8 X 2-9/16 L /16 X 2-1/2 L /16 X 2-1/16 L /16 X 2-1/8 L /16 X 1-3/8 L /16 X 1-3/4 L /16 X 2-1/4 L /4 X 1-15/16 L /4 X 1-3/4 179
180 CORNICE MOULD (ALSO SEE BRICK MOULD) L /8 X 3-3/8 L /4 X 2-7/8 L X 2-1/4 L /4 X 2 L /4 X 1-3/4 L /8 X 2-7/16 L /8 X 1-3/8 L /8 X 1-3/8 L /16 X 2-1/2 L /2 X 1-13/16 L X 2-3/8 180
181 CORNICE MOULD (ALSO SEE BRICK MOULD) L /16 X 2-5/16 L /8 X 2-1/4 L /16 X 2-5/16 L /8 X 1-7/8 L /16 X 2 L /8 X 2-3/8 L /16 X 1-3/8 L /16 X 1-1/4 L /4 X 1-3/4 L /16 X 1-11/16 181
182 CORNICE MOULD (ALSO SEE BRICK MOULD) L /8 X 2-1/8 L X 1-3/4 L /16 X 1-1/2 L /4 X 1-3/4 L /16 X 3-1/2 L X 1-1/8 L /8 x 1-9/16 L /16 X 2-1/4 L /4 X 1-7/8 182
183 CORNICE MOULD (ALSO SEE BRICK MOULD) THIS PAGE INTENTIONALLY LEFT BLANK 183
184 CORNICE MOULD (ALSO SEE BRICK MOULD) THIS PAGE INTENTIONALLY LEFT BLANK 184
185 CORNICE MOULD (ALSO SEE BRICK MOULD) THIS PAGE INTENTIONALLY LEFT BLANK 185
186 BACKBAND (DADO IS ADJUSTABLE) L /16 X 1-7/16 L /8 X 2-1/8 L /8 X 1-1/8 L /4 X 1-1/16 NOW IN-STOCK VG FIR L /8 X 1-7/8 L /8 X 1-7/16 NOW IN STOCK VG FIR L /16 X 1-1/16 L /16 X 1-3/8 L /8 X 1-1/4 L /8 X 1-3/8 186
187 BACKBAND (DADO IS ADJUSTABLE) L /8 X 1-7/16 L /16 X 1-7/16 L /8 X 1-3/4 L /4 X 1-7/16 L /4 X 1-3/8 L /8 X 2 L /4 X 1-1/8 L X 1-1/8 L /4 X 2 L /16 X 1-1/8 L /16 X 1-7/16 187
188 BACKBAND (DADO IS ADJUSTABLE) L /8 X 1-3/8 L /16 X 7/8 L /8 X 1-3/8 L /16 X 1 L /8 X 1-1/8 L /2 X 1-3/8 L /8 X 1-1/8 L /16 X 1-1/16 L /16 X 2-1/4 L /16 X 1-1/4 L /8 X 1-1/8 L /16 X 1-1/8 188
189 BACKBAND (DADO IS ADJUSTABLE) L /8 X 1-3/8 L /16 X 1-1/8 L /16 X 1-9/16 L /16 X 1 L /4 X 1-5/16 L /4 X 1-3/8 L /8 X 2-1/4 L /8 X 1-1/2 L /4 X 1 L /16 X 2 L /8 X 1 L /8 X 2-1/4 189
190 BACKBAND (DADO IS ADJUSTABLE) L /8 X 1 L /2 X 1-1/16 L X 13/16 L /8 X 2 L /16 X 1-11/16 L /8 X 1-1/4 L /16 X 1-1/16 L /16 X 1-11/16 L /8 X 1-3/4 L /8 X 1-3/4 L /8 X 1-1/2 L /4 X 1-9/16 190
191 BACKBAND (DADO IS ADJUSTABLE) L /8 X 7/8 L /16 X 1-7/16 (Note Eased Edges) L x 1 L /8 X 1-1/8 L /16 X 1 L /16 X 1-7/16 L /2 X 1-5/8 L /4 X 1-3/8 L /16 X 1-3/16 L /16 X 1-1/16 L /8 x 1-1/4 L X 15/16 191
192 BACKBAND (DADO IS ADJUSTABLE) L /4 X 1-9/16 L /8 X 1 L /8 X 1-7/16 L /8 X 2-5/16 L /8 X 1-3/16 L /8 X 1 L /4 X 1-1/4 L /8 X 1-3/4 L /16 X 1-1/2 L /2 X 1-7/16 L /2 X 1-3/4 L /4 X 1-1/4 192
193 BACKBAND (DADO IS ADJUSTABLE) L /16 X 1-1/16 L /16 X 1-1/16 L /4 X 1-1/4 L /16 X 2-1/4 L /8 X 1-1/8 L /16 X 1-1/8 L /16 X 1-1/16 L /8 X 1-1/8 L /16 X 1-1/16 L /4 X 1-1/4 L /2 X 1-3/8 L /4 X 1-1/2 193
194 BACKBAND (DADO IS ADJUSTABLE) L /16 X 2 L /4 X 1-5/8 L /16 X 1-1/16 L /4 X 1-1/8 L /4 X 1-9/16 L /4 X 1-1/2 L /8 X 11/16 l /8 x 1-3/8 L X 1-1/4 L /16 X 1-7/16 194
195 BACKBAND (DADO IS ADJUSTABLE) L /4 X 2-3/16 L /16 X 1-1/16 L /16 X 1-1/16 L /8 X 1-1/16 L /16 X 7/8 195
196 BACKBAND (DADO IS ADJUSTABLE) THIS PAGE INTENTIONALLY LEFT BLANK 196
197 BACKBAND (DADO IS ADJUSTABLE) THIS PAGE INTENTIONALLY LEFT BLANK 197
198 BACKBAND (DADO IS ADJUSTABLE) THIS PAGE INTENTIONALLY LEFT BLANK 198
199 BACKBAND (DADO IS ADJUSTABLE) THIS PAGE INTENTIONALLY LEFT BLANK 199
200 CAP MOULD L /4 X 2-3/4 L /4 X 2-5/8 L /16 X 3 L /4 X 3 L /16 X 3-1/4 L /8 X 2-7/16 IN STOCK L /4 X 2-1/8 L /4 X 2-3/4 200
201 CAP MOULD L /4 X 2-1/4 L /16 X 2-3/8 L /2 X 2-1/2 L /2 X 2-1/4 L /16 X 2-1/4 L /2 X 2 L /16 X 2-1/4 L /16 X 3-1/4 L /16 X 2-1/2 L /8 X 2-3/8 201
202 CAP MOULD L /16 X 2-1/2 L /16 X 2-3/8 L /16 X 2-1/2 L /8 X 2-7/16 L /4 X 2-1/2 L X 2 L /8 X 2-7/16 L /8 X 3-3/8 L /16 X 2-9/16 L /2 X 2-1/2 202
203 CAP MOULD L /2 X 2 L /16 X 2-3/8 L /16 X 2-5/8 L /8 X 2-1/4 L /16 X 2-3/8 L /2 X 2-1/2 L /8 X 3-3/8 L /4 X 2-3/8 L /16 X 2-3/16 L /16 X 2-1/2 203
204 CAP MOULD L /16 X 2-5/8 L /16 X 2-5/8 L /4 X 2-5/8 L /8 X 2-7/16 L /8 X 2-3/4 L X 3-1/4 L /2 X 2-9/16 L /8 X 2-3/8 L /8 X 2-7/16 L /16 X 3 L /8 X 2-1/2 204
205 CAP MOULD L /8 X 2-9/16 L /16 X 2-3/8 L /8 X 2-7/16 205
206 CAP MOULD THIS PAGE INTENTIONALLY LEFT BLANK 206
207 CAP MOULD THIS PAGE INTENTIONALLY LEFT BLANK 207
208 PANEL MOULD & MULLIONS L /16 X 2-7/8 L /4 X 1-1/2 L /8 X 3 L /16 X 1-3/8 L /16 X 1-7/8 L /4 X 3 L /16 X 2-1/2 L /2 X 3-5/16 L /8 X 2-5/8 MULLION FOR L-4006 L /2 X 2-1/4 L /8 X 2-3/4 L /16 X 3-1/8 L /8 X 1-9/16 L /8 X 1-3/4 L /4 X 2-1/2 L /16 X 2 208
T502-T519 Miscellaneous Trims. 19th Century Casing Step. Band Mould or Astragal Flat. Novelty Mini-Mock Bevel. Window & Door Stop.
T502-T519 Miscellaneous s Stock Glass Bead T502 9/16 x 3/4 Window & Door Stop T503 9/16 x 1 Scribe & Shoe T504 3/8 x 7/8 Inside Corner T505 Outside Corner T507 Casing Step T510 1/2 x 3/4 STOCK T511 T512
Architectural & Design Catalog
Architectural & Design Catalog Welcome To Millwork Concepts The design of a new home is both an exciting and expensive endeavor. From the architect to the installer, the quality of the service creates
The Builder s preference for innovative ideas and superior quality. Moulding Selection Guide Orlando Edition Moulding & Millwork
The Builder s preference for innovative ideas and superior quality. 2007 Orlando Edition Moulding & Millwork Casings Casings define the overall character of a room and are often the most visible part of
MOULDING MOULDING SOLID PINE BASE SOLID PINE BASE. Streamline Base P-220 1/2 x 3-1/4. Streamline Base P-218 1/2 x 2-1/4
SOLID PINE Solid pine, or stain grade pine, is one of the original moulding substrates that can be painted or stained. The grain of this solid piece of wood is continuous for stained or natural finishes.
-FOR 8 & LONGER - ADD 20%, FOR 10 & LONGER - ADD 30%, FOR 12 & LONGER - ADD 40%
CHERRY MOULDINGS SOLD IN RANDOM LENGTH 6 TO 16 -FOR 8 & LONGER - ADD 20%, FOR 10 & LONGER - ADD 30%, FOR 12 & LONGER - ADD 40% -SPECIFIED LENGTHS ARE SUBJECT TO AVAILABILITY Astragal (T) 7 CTA-1 3 / 8
WILLIAMS & HUSSEY IN-STOCK KNIVES
WILLIAMS & HUSSEY IN-STOCK KNIVES Toll Free 800-28-80 60-72-029 0 State Route 0A, Unit 4 PO Box 08 Amherst, NH 00 www.williamsnhussey.com REFER TO PROFILE DIMENSIONS FOR TRUE SIZE. HELPFUL HINTS Bold lines
Green Building Initiative
09 10 $5 Green Building Initiative MOULDING & MILLWORK INC., & OUR AFFILIATED BUSINESSES, ARE COMMITTED TO SUSTAINABLE FORESTRY PRACTICES IN ALL OF OUR OPERATIONS. To this end we have undertaken significant
WELCOME TO ARTCRAFT WOOD PRODUCTS COMPANY, A FAMILY OWNED BUSINESS SINCE MOULDINGS ALSO AVAILABLE WE NOW SUPPLY DOORS.
WELCOME TO ARTCRAFT WOOD PRODUCTS COMPANY, A FAMILY OWNED BUSINESS SINCE 1946. MOULDINGS Astragal Chair Rails Half Rounds Rosettes Bar Rail Corner Blocks Hand Rails S4S Stock Base Corner Mould Inside Corner
2018 Moulding Catalogue. Design & Decorate with Architectural Trim & Moulding
2018 Moulding Catalogue Design Decorate with Architectural Trim Moulding 220 Wellington St. East Aurora ON L4G 1J5 905-727-1387 Toll Free: 1-866-816-8703 Fax: 905-727-1050 www.royalwoodshop.com Hours of
Linear Moulding Profiles
Linear Moulding Profiles Full Length Hardwoods Lengths from 8 to 16 Over 125,000 LF Stocked Prefinishing Available Radius Moulding Custom Knife Profile CAD Files Available Georgia Hardwoods Inc 3061 Verona
Inspired People Innovative Solutions Beautiful Homes Contractors Guide
Inspired People Innovative Solutions Beautiful Homes Contractors Guide www.mouldingandmillwork.com One Company One Focus. Moulding & Millwork is North America s leading supplier of mouldings. We offer
Door Components - Jambs - Northeast
Door Components - Jambs - Northeast 800.253.9000 6'8" FLAT JAMBS JAMB SIZE DIMENSION BELOW DADO EFPMD (GLO PAK) VENEER EGPIN (EDGE GLUED ) VENEER OVER W/WS (EXP3W) BIRCH VENEER (PB CORE FJ EDGE) BIRCH
Moulding Selection Guide 2011/2012
Innovative Solutions / Beautiful Homes $5 2011/2012 www.mouldingandmillwork.com Green Initiatives MOULDING & MILLWORK INC. AND OUR AFFILIATED BUSINESSES ARE COMMITTED TO SUSTAINABLE BUSINESS PRACTICES.
Traditional Mortise & Tenon - Flat Panel
abinet Doors & s Traditional Mortise & Tenon - Flat Panel Style: 40 Style: 30 P: 201 Frame: P101 x 0.6 Min. Size: 6⅝x6 Style: 4040 Style: 3030 P: 203 Frame: P103 x 0.6 Min. Size: 9¾x6⅝ Style:7020 Style:
MOULDING $5. Selection Guide 09$3.
$5 09 MOULDING $5 Selection Guide 09$3 www.mouldingandmillwork.com making interiors spectacular Making Interiors Spectacular Moulding Gallery Distribution Locations Vancouver (2) Edmonton Calgary Saskatoon
Ultralite and Basic Mdf
Ultralite and Basic Mdf T h e N u m b e r O n e C h o i c e f o r P a i n t G r a d e A r c h i t e c t u r a l M i l l w o r k STANDARD MOULDINGS :: ULTRALITE & BASIC MDF STANDARD MOULDINGS :: ULTRALITE
Table of Contents. 18 Column Wrap 20 Garage Door ThermoStop 22 Window & Door Trim 26 Mouldings 39 Reference
Product Directory 2 Table of Contents 3 4 S4S Trimboard 6 SurEdge Trimboard 8 Conceal Trim System 12 Precision Cut Trimboard 16 Sheet Board 17 Nickel Gap/Shiplap, Beadboard & Wainscoting 18 Column Wrap
MOULDINGS ARCHITRAVES BASEBOARDS
ARCHITRAVES High above windows and doors, architraves work to add grandeur to any space reducing miter lines and elevating your look. A great architrave is, above all else, the dressing that s built to
Traditional Mortise & Tenon - Raised Panel
abinet Door & Drawer Front Options Traditional Mortise & Tenon - Raised Panel Style: 10 P: 101 Frame: P101 x 0.6 Style: 20 P: 102 Frame: P102 x 0.6 Style: 2000 P: 102 Frame: P102 x 0.6 Style: 2200 P: 102
FINISHING TOUCHES
FINISHING TOUCHES When it comes to putting the tile puzzle together with the right trims and moldings, MADE by ANN SACKS gives you a genuine edg We have decorative and architectural accents already designed
Low "E" Insulating Glass. Authentic Divided Light. Modular Replacement Sash. Crafting Products that Fit Northeast Lifestyles Since 1890
Low "E" Insulating Glass Authentic Divided Light Modular Replacement Sash Crafting Products that Fit Northeast Lifestyles Since 1890 Turn Your Dreams into Reality with BROSCO Window Units. Windows that
Inspired People Innovative Solutions Beautiful Homes Moulding Selection Guide
$5 Inspired People Innovative Solutions Beautiful Homes 2013 www.mouldingandmillwork.com Green Initiatives Moulding and Millwork is pleased to announce the introduction of Turncraft Columns & Posts MouldingandMillwork.com
Doors Moldings Windows Hardware. Product Catalog. 455 E Jarvis Avenue Des Plaines, IL Phone Fax
Quality & Service Since 1953 Doors Moldings Windows Hardware Product Catalog 455 E Jarvis Avenue Des Plaines, IL 60018 Phone 847-699-2040 Fax 847-699-7131 www.nwmillwork.com Northwest Millwork Phone (847)
LITTLE BLACK BOOK OF MOULDINGS IS THE PROPERTY OF:
LITTLE BLACK BOOK OF MOULDINGS northern edition edition 2011 4 INTERIOR / EXTERIOR POCKET GUIDE MDF FJ Pine Hardwoods Solid Pine VG Doug Fir Redwood Back Pocket LITTLE BLACK BOOK OF MOULDINGS IS THE PROPERTY
Learning Rhino 3D. Modelling a fork
> Background images - use PictureFrame command to load top and side images of the fork. Place the top image in the Top viewport and place the side image in the Front viewport. > Scale images - you will
BC REGION Catalogue
BC REGION 2016 Catalogue 2 TIG PREMIUM PRIME MOULDINGS 2016 CTLOGUE BC REGION PREMIUM PRIME MOULDINGS DISTRIBUTED BY TIG BUILDING PRODUCTS Taiga mouldings are manufactured from the finest, medium-density
WESTERN PACIFIC BUILDING MATERIALS. Service You Can Build On
WESTERN PACIFIC BUILDING MATERIALS Service You Can Build On MOULDING Casing..............4, 5, 6, 7 Base.................8, 9, 10 Crown..........11, 12, 13, 14 Door Headers.............15 Chair Rail, Panel
BC REGION Catalogue
BC REGION 2017 Catalogue 2 5"*(" 13&.*6. 13*.&.06-%*/(4 t $"5"-0(6& o #$ 3&(*0/ PREMIUM PRIME MOULDINGS DISTRIBUTED BY TIG BUILDING PRODUCTS Taiga mouldings are manufactured from the finest, medium-density
VJ Sheeting and Mouldings
VJ Sheeting and Mouldings Colonial Wall Linings (Est. 1999), are suppliers of MDF VJ wall linings and manufacturers of MDF mouldings. Our goal is to supply/manufacture high quality products and to provide
Framing Lumber SKU Name Price Unit PREM2488 2X4 88 STUD GRADE KD SPRUCE $2.58 PC 248K 2X4 8 STUD GRADE KD SPRUCE $3.14 PC K 2X4 92-5/8 STUD
Framing Lumber PREM2488 2X4 88 STUD GRADE KD SPRUCE $2.58 PC 248K 2X4 8 STUD GRADE KD SPRUCE $3.14 PC 249258K 2X4 92-5/8 STUD GRADE SPF $3.12 PC 2410K 2X4 10 STUD GRADE KD SPRUCE $3.87 PC 2412K 2X4 12
Framing Lumber SKU Name Price Unit PREM2488 2X4 88 STUD GRADE KD SPRUCE $2.76 PC 248K 2X4 8 STUD GRADE KD SPRUCE $2.54 PC K 2X4 92-5/8 STUD
Framing Lumber PREM2488 2X4 88 STUD GRADE KD SPRUCE $2.76 PC 248K 2X4 8 STUD GRADE KD SPRUCE $2.54 PC 249258K 2X4 92-5/8 STUD GRADE SPF $2.49 PC 2410K 2X4 10 STUD GRADE KD SPRUCE $3.21 PC 2412K 2X4 12
Hardware & Accessories
Hardware & Accessories Assure that your installations and designs are completed in professional fashion by utilizing Stylmark s Hardware and Accessories. This catalog represents a collection of these items,
CLASSIC COLLECTION BY
CLASSIC COLLECTION BY TWO Stock and Custom MDF Moulding Profiles CLASSIC COLLECTION BY TWO This catalog presents 's moulding profiles available in MDF. The front of the catalog consists of our stock line
FOR ALL YOUR TIMBER AND DIY REQUIREMENTS
FOR ALL YOUR TIMBER AND DIY REQUIREMENTS Macclesfield was the first branch opened by Illingworth Ingham (M/cr) Ltd in November 1972. This means we have been serving the builders, joiners and residents
FITTINGS. pg RAILS. pg 47 TREADS & STARTING STEPS. pg ACCESSORIES. pg 51. Fittings, rails, treads and accessories provide the finishing
S T A I R C O M P O N E N T S FITTINGS pg 42-46 RAILS pg 47 TREADS & STARTING STEPS pg 48-50 ACCESSORIES pg 51 Fittings, rails, treads and accessories provide the finishing touches that complete your stairway.
CONTRACTORS STEEL COMPANY STOCK BOOK AND REFERENCE GUIDE INDEX
CONTRACTORS STEEL COMPANY STOCK BOOK AND REFERENCE GUIDE INDEX CARBON STEEL BARS Hot Rolled Rounds...3 Squares...4 Strip...4, 5 Flats...5, 6, 7, 8 COLD FINISHED Rounds - 1018...9, 10 Rounds - 1045...10
MOULDING YOUR WORLD WITH ENDLESS POSSIBILITIES.
MOULDING YOUR WORLD WITH ENDLESS POSSIBILITIES. Whatever it takes. taigabuilding.com PREMIUM PRIME MOULDINGS DISTRIBUTED BY TAIGA BUILDING PRODUCTS Taiga mouldings are manufactured from the fi nest, medium-density
The Best of SketchUp This amazing 3D design program can make you a better woodworker.
The Best of SketchUp This amazing 3D design program can make you a better woodworker. By David Heim More and more woodworkers have switched from T-square and pencil to the SketchUp 3D program to design
FOR ALL YOUR TIMBER AND DIY REQUIREMENTS
FOR ALL YOUR TIMBER AND DIY REQUIREMENTS Illingworth Ingham (M/cr) Ltd Joinery and Timber Division has been serving the Hyde area for over 30 years. Originally established in Gee Cross in November 1975
carcassing m m B fire rated 300 X X X X 100 CLS 50 X 75 CLS
PRODUCT GUIDE carcassing Section Untreated 300 X 300 150 X 300 150 X 150 125 X 250 100 X 225 100 X 200 100 X 150 100 X 100 75 X 300 75 X 250 75 X 225 75 X 200 75 X 150 75 X 100 75 X 75 50 X 100 CLS 50
Technical Guide G. GSpecialty Windows. Technical Guide G1
Technical Guide G Specialty Windows G Technical Guide G1 Product Features Styles Picture, Fixed Casement, Operating Casement, Double Hung, Single Hung, Radius Top and Cottage options. Standard Features
FOR ALL YOUR TIMBER AND DIY REQUIREMENTS
FOR ALL YOUR TIMBER AND DIY REQUIREMENTS At Portwood Timber we are able to offer a wealth of industry experience, offering sound advice to our customers. We have an impressive specialist machining service
Serving Arizona with All of Your Lumber & Plywood Needs
Product List SPELLMAN HARDWOODS Serving Arizona with All of Your Lumber & Plywood Needs Hardwood Lumber Plywood (all types) Pine Lumber Hardboard Particle Board Medium Density Fiberboard Panolam HPL Layup
QuickQuote Algoma Hardwoods, Inc. Internet Estimating System Quick Start Guide
More than a name it s a standard. Established in 1892. 1001 Perry Street Algoma, WI 54201 (920) 487-5221 (920) 487-3636 Fax sales@algomahardwoods.com QuickQuote Algoma Hardwoods, Inc. Internet Estimating
meaden Special Shaped Punches & Dies Information English Version
Special Shaped Punches & Dies Information English Version 210 West 83rd Street Burr Ridge, Illinois 60521 Telephone: 630/655-0888 FAX: 630/655-3012 Internet www.printing.com How to Order Specials Clearance.515"
Southern Crafted Millwork s Moulding Catalogue
Southern Crafted Millwork s Moulding Catalogue "Enduring Performance, Lasting Beauty" Custom Oak Crown Moulding 2 Crown Mouldings BC52FJ 9/16 x 2 3/4 BC49FJ 9/16 x 3 5/8 BC37MD 11/16 x 5 BC52CP 9/16 x
HOW TO WRITE AN ACCURATE ORDER.
HOW TO WRITE AN ACCURATE ORDER. We have so many ways to give your clients unique and functional kitchens. We want to make sure you get exactly what your client is expecting. To do that, StarMark must receive
Short Unfluted - (Ideal for Kneewall Applications and Pedestal Bases)
174 quick ship sizes/styles in stock Square non-tapered and tapered Fluted and raised panel styles Split columns, caps and bases Craftsman style columns DuraStone Columns Call about new lightweight pultruded
SPECIFICATIONS GUIDE GRABER TRADITIONS SPECIALTY SHUTTERS SECTION 8
SPECIFICATIONS GUIDE GRABER TRADITIONS SPECIALTY SHUTTERS SECTION 8 April 2013 Café Shutters Available inside and outside mount. If using hang strip: hang strip will be same height as café panel. If using
Tutorial 1 Engraved Brass Plate R
Getting Started With Tutorial 1 Engraved Brass Plate R4-090123 Table of Contents What is V-Carving?... 2 What the software allows you to do... 3 What file formats can be used?... 3 Getting Help... 3 Overview
Footprints by K Framing Catalog
Footprints by K Framing Catalog Standard Frames Prints MUST be mounted on Foam Core or on a Canvas Stretcher Frame to be framed. Note: Foam Core Mounted prints include glare-free glass. Glass cannot be
www.southwestmoulding.com Southwest Edition 2017 Select with Confidence Creative has you covered with products and service you can rely on. Custom Stair Parts Possibilities? Endless. With the largest assortment
Wood Products for All Projects
Wood Products for All Projects Founder Bud Nosen Made in Minnesota AAA BALSA September 1, 2010 Our balsa wood is a kiln-dried product from various South American mills. Balsa wood has a high strength to
SENIOR HIGH MATH LEAGUE April 24, GROUP III Emphasis on GEOMETRY SECTION I: ONE POINT EACH
SENIOR HIGH MATH LEAGUE TEST A Unless otherwise stated give exact answers. 1 Find the exact area in square inches of an equilateral triangle whose base is of length 10 inches. 2. Give the smallest possible
If you wish to pack the stamps yourself we can ship them with the printed sheet only and include your bags separately.
Stamp Specification: Our standard packing specification is to send stamp sets with a printed acetate sheet showing your design. The clear sheet is printed in black and attached to the stamps, for an additional
M100/M100 AUTOMATIC CORNER FORMING IN ONE PASS
M100/M100 AUTOMATIC CORNER FORMING IN ONE PASS THE TECHNICAL CONCEPT The M100 forms high quality closed corners from a pre-bent flat blank from various Materials such as Mild Steel, Stainless Steel, Aluminum,
Unique Plaster Unique interior and exterior decorative mouldings
Unique Plaster Unique interior and exterior decorative mouldings www.uniqueplaster.com.au Email: sales@uniqueplaster.com.au DOMES Ready made Domes are an inexpensive way of making a great statement of
EPT 331 Advanced Manufacturing Technology LAB 2: CAM MILLING (Catia) 2008/2009 LAB 2: CAM MILLING
OBJECTIVES LAB 2: CAM MILLING 1. Students will be exposed to CAM for Milling Machine. 2. Student will have the ability to use CATIA Software as a CAM for Milling Machine. 3. Student will have the ability
The Cover Sheet - MS Word
The Cover Sheet - MS Word You can create the Cover Sheet for your book using Microsoft Word. The Cover Sheet The Cover Sheet consists of four main components: The Back Cover The Front Cover The Spine Bleed
ZW3D 2011 New Features
ZW3D 2011 New Features Table of Contents Introduction to ZW3D 2011... 1 1. Modeling Innovations... 2 1.1 SmoothFlow Direct Edit... 2 1.2 Dynamic Dimensions... 2 1.3 QuickEdit... 3 1.4 SmartPick... 4 1.5
STAKE POCKET AND RAIL CLAMP LAYOUT (6302 & 6314) - PAGE 1 B - End 6302 A - End 6302 Centerline of stake pockets
STAKE POCKET AND RAIL CLAMP LAYOUT (6302 & 6314) - PAGE 1 B - End 6302 A - End 6302 Centerline of stake pockets ( Typical D&RGW cast stake pocket) 40 over the end sills 2-11 6-4 9-9 13-2 16-7 20-0 20-0
ME Week 3 Project 3 - Plastic Part Thicken Method
Plastic Part Commands The following section will give a further overview of the Autodesk Inventor plastic part commands. 1. Project 3 This project will further introduce you to the Autodesk Inventor 2012
to display both cabinets. You screen should now appear as follows:
Technical Support Bulletin: AllenCAD Tutorial Last Updated November 12, 2005 Abstract: This tutorial demonstrates most of the features of AllenCAD necessary to design or modify a countertop using the program.
The Collection. - Weather Proof - Insect Proof - Load Bearing - Low Maintenance
The Collection - Weather Proof - Insect Proof - Load Bearing - Low Maintenance - Ready to Prime and Paint - Limited Lifetime Warranty* - Custom Fluting Available - Factory PermaPriming Available H 24"
Kully Reference Book
Kully Reference Book Serving the Greater Mid-West since 1946 Angles Channels Beams Rounds Sheets Squares Flats Rebar Wire Mesh Black & Galvanized Pipe Anchor Bolts Plastic, Copper, Black, Galvanized Pipe
Folding system UpDownBend
RAS Reinhardt Maschinenbau GmbH No more flipping parts! Folding a profile No flipping The folds the part up and down and revolutionizes the entire folding sequence. This unique folding system reduces cycle
UNIT 4: LENGTH, AREA, AND VOLUME WEEK 16: Student Packet
Name Period Date UNIT 4: LENGTH, AREA, AND VOLUME WEEK 16: Student Packet 16.1 Circles: Area Establish the area formula for a circle. Apply the area formula for a circle to realistic problems. Demonstrate
Files. Cut Types PFERD. Sharpening files. Files for the workshop. Wood rasps. Car body files. Precision files. Milled tooth files
Files For almost 200 years, PFERD files have been renowned worldwide as a top quality product. With their constantly high cutting performance, ensuring an excellent surface quality even after long use,
Commercial Grade * Custom & Premium "A" Grade Full Machining Capabilities. Stock Book 2014
Commercial Grade * Custom & Premium "A" Grade Full Machining Capabilities Stock Book 2014 Rev 10/2014 ASSA ABLOY Service Center is associated with AADG, Inc., an ASSA ABLOY Group company. Copyright 2018,
sq ** Ra
Laminate Tops specification example edge top option laminate edge color (for 4902 and 4903 edges only) 4903 36S-L Wilsonart 4623-60, graphite nebula black (09) edge width x 24R-L 32R-L 36R-L 48R-L 60R-L
Updated April 28, 2010
Performance Chief Architect download is faster and more efficient now that Library Catalogs are download on demand and can be mass downloaded or on an as needed basis. New Ray Trace Rendering Engine. Enhanced
TILBURY STEEL SERVICE CENTRE
TILBURY STEEL SERVICE CENTRE 159 Queen Street North Tilbury, ON, N0P 2L0 Voice: 519-682-0000 Toll-Free: 1-800-565-1077 Fax: 519-682-0004 Email: tsales@tilburysteel.com STOCK BOOK & REFERENCE GUIDE Tilbury
Belmont VENEER COLLECTION. Unpretentious yet smartly styled.
Belmont VENEER COLLECTION Unpretentious yet smartly styled. 7130 EXECUTIVE CHERRY 7132 BROWN CHERRY 2 www.flexsteel.com The Belmont Collection s transitional style brings refined warmth to any office,
Livingston & Co., Inc Gallia St. Portsmouth, Ohio (740) (740) Open Monday - Friday 8:00-12:00 12:45-4:00
Livingston & Co., Inc. 2502 Gallia St. Portsmouth, Ohio 45662 (740) 353-0763 (740) 353-6008 Open Monday - Friday 8:00-12:00 12:45-4:00 www.livingstonrecycling.com New Steel Prices Angles Size/Inch Thickness
- Weather Proof - Insect Proof - Load Bearing - Low Maintenance - PermaFlashing
The Collection - Weather Proof - Insect Proof - Load Bearing - Low Maintenance - PermaFlashing - PermaPrimed Tuscan Cap and Base - Ready to Prime and Paint - Lifetime Warranty - Custom Fluting Available
Page Layout Design min
1 of 8 09/11/2011 19:26 Home > Design Tips > Page Layout Design Page Layout Design 15-25 min In this tutorial, we ll explore the design phase of document creation. With the grid as our layout guide, we
4) Inventory Maintenance
4) Inventory Maintenance BASIC TRAINING WORKSHOP & REFERENCE MANUAL E4W Level 14 Last Revision on Wednesday, February 09, 2005 TRAINING ASSISTANCE Help is available to aid you in the operation of your
Changes in CabWriter Version Note:
Changes in CabWriter Version 1.1.0 Note: This release fixes a number of problems introduced with the release of SketchUp 2018 Pro. Also, a number of images in this document were created with a beta version
ME 120: Impeller Model in Solidworks 1/6
ME 120: Impeller Model in Solidworks 1/6 Steps to Draw Pump Impeller: The steps below show one way to draw the impeller. You should make sure that your impeller is not larger than the one shown or it may
Split Frame Clamshells and Accessories
Split Frame Clamshells and Accessories Sever and Machine Pipes From.625" to 86" (15.9 mm to 2184.4 mm) Rigid And Easy To Handle - Aluminum Body Gives Highest Strength-To- Weight Ratio And Our Exclusive
Poly-Classic DuraStone
introducing Poly-Classic DuraStone Never needs paint Colored throughout Ready to install Patent-pending process unique contruction Poly-Classic DuraStone Columns are maintenancefree fiberglass columns,
Squares and Rectangles
11 CHAPTER Squares and Rectangles Lesson 11.1 Squares and Rectangles Study the figure. Then fill in the blanks. 1. There are right angles. 2. There are equal sides. 3. There are pairs of parallel sides.
18. Layout Splines Varieties of Layout Splines and Materials Track Splines Roadbed Splines
18. Layout Splines Layout Splines are a revolutionary new method to convert your digital track plan into a full scale layout. Instead of printing your layout onto paper to transfer to plywood or other
ezframer Picture Framing Software
ezframer Picture Framing Software Help Documentation ezframer Picture Framing Software N U T E C H ezframer Help Documentation nutech, Phone 800-404-0634 Web site: www.ezframer.com Email: contact@ezframer.com
RFA 2315 WINDOW. Revit Content WINDOW. Copyright by Content & More Limited, All Rights reserved
Copyright 29-2 by Content & More Limited, All Rights reserved Dimension Overview Frame Width Frame Depth Window Profile Depth Window Profile Width Frame Depth Position Width GENERAL PLAN DIMENSIONS FIG
SINGLE, BI-PARTING, BYPASSING UP TO 400LBS (CONTACT US FOR HEAVIER PANELS)
PRODUCT SPECIFICATIONS ODEN TOP MOUNT -/8" MINIMUM UP TO 400LBS (CONTACT US FOR HEAVIER PANELS) /4" = '-0" (:6) 4//208 DETAIL A SCALE "=' ( : 4) 4 " REQUIRED 4 " OPTIONAL 2 5 8 " DETAIL C SCALE "=' ( :
It s a way of life...
1 It s a way of life... Contents New Products for 2016...4 The PermaCast Column Collection...8 Perma Caps and Bases...17 PermaWrap Collection...19 RigidWrap FAWP...22 PermaSnap...23 PermaLite Columns...24
CNC ROUTER - GRANITE 1200 X 1600 X 200
KRITELAS ATHANASIOS CNC MANIFACTURE FARMAKI 23 STR- 52100 KASTORIA - GREECE TEL: ++30 2467023619 Fax: ++30 2467023886 www.servo.gr - email: krit01@otenet.gr CNC ROUTER - GRANITE 1200 X 1600 X 200 Greece
Surface Area and Volume
Name: Chapter Date: Surface Area and Volume Practice 1 Building Solids Using Unit Cubes Find the number of unit cubes used to build each solid. Some of the cubes may be hidden. 1. 2. unit cubes 3. 4. unit
Introduction to algebra - Worksheet 1. Introduction to algebra - Worksheet 2. Law of indices - Worksheet 1. Law of indices - Worksheet 2
Introduction to algebra - Worksheet 1 If the value of a =, b = 3 and c = 4, evaluate the following: 1. a = 4. ab 3 = 54 3. a c = 3 4. 5a + 6b = 74 5. a + c = 0 6. 7. 5 c ab 3 = 51 7 8. 3a 4 = 3 c 3 6a
PRIME HARVEST CLASSIC AMERICAN HARDWOOD
PRIME HARVEST CLASSIC AMERICAN HARDWOOD Hickory Eagle Landing APH5403 2 Armstrong Prime Harvest Just the floor you re looking for Transforming your space with a new hardwood floor is exciting. It can also
Details, Details. Mouldings
rown Mouldings... 50 rown Mouldings entil... 57 rown Mouldings ecorative... 59 ornice Mouldings... 61 Smooth Flat Trim... 64 Trim rick Mould... 65 Trim, asing & pron... 66 hair Rail... 68 aseboard Trim...
2018 DOOR CATALOG. Revised 8/20/18
2018 DOOR CATALOG Revised 8/20/18 Table of Contents Door Information..3 Rush Schedules..4 Cancellation Policy..4 Door Grade Information... Cabinet Grade Door... Furniture Grade Door.. FD Grade Door.. Grade
PAF Chapter Prep Section Mathematics Class 6 Worksheets for Intervention Classes
The City School PAF Chapter Prep Section Mathematics Class 6 Worksheets for Intervention Classes Topic: Percentage Q1. Convert it into fractions and its lowest term: a) 25% b) 75% c) 37% Q2. Convert the
Electrak quick fit floor service outlet boxes
www.electrak.co.uk 12 Electrak quick fit floor service outlet boxes Tel: 01207 503400 Fax: 01207 501799 Email: sales@electrak.co.uk Because of our policy of continuous improvement, Electrak reserves the
ARCHITECTURAL SLATE INSPIRATION Welsh Slate has been the bench mark for quality and durability for the last 300 years. Made from slate deposits that are over 500 million years old, the material is widely
Rocket 1. Fin. in the Feature Manager and click Sketch from the Content toolbar, Fig. 1. (L) on the Sketch toolbar. Fig. 1. Fig. 2
Chapter 2 Rocket 1 Fin A. Sketch. Step 1. Click File Menu > New, click Part and OK. Step 2. Click Right Plane in the Feature Manager and click Sketch from the Content toolbar, Fig. 1. Step 3. Click Line
Tutorial 3 Kitchen Cabinet Door
Getting Started With Tutorial 3 Kitchen Cabinet Door VCarve Pro Disclaimer All CNC machines (routing, engraving, and milling) are potentially dangerous and because Vectric Ltd has no control over how
Strategy. Using Strategy 1
Strategy Using Strategy 1 Scan Path / Strategy It is important to visualize the scan path you want for a feature before you begin taking points on your part. You want to try to place your points in a way
VOLTERRA HDF PRODUCTS
VOLTERRA HDF PRODUCTS Table of Contents COLUMNS 4 SMOOTH CORBELS 7 ROUGH SAWN CORBELS 8 ROUGH SAWN L HEADERS 10 ROUGH SAWN BEAMS 14 TRUSS TAILS 19 TILE VENTS 20 WINDOW SILLS/ DOOR TRIM 22 BRACKETS 25 MISCELLANEOUS