NanEye GS. Idule Module Evaluation Unit

Transcription

1

2 Revision History: Version Date Modifications Author Document creation Fátima Gouveia /12/14 Updated Document Fátima Gouveia DATE: 11/12/14 Version PAGE: 2/12

3 Table of Contents 1 Overview Idule Module Connectors USB 3.0 Connector Type A External Trigger Input Connector Dimensions Evaluation Software How to Install Awaiba Viewer How to Start Awaiba Viewer How to Use Awaiba Viewer...11 DATE: 11/12/14 Version PAGE: 3/12

4 Index of Tables Table 1: Specifications...6 Table 2: Description of USB Connector CN1...7 Table 3: Description of Control Box CN2...8 Index of Figures Figure 1: USB Connector CN1...7 Figure 2: Control Box CN2...8 Figure 3: Camera Head...9 Figure 4: Control Box...9 DATE: 11/12/14 Version PAGE: 4/12

5 1 Overview This evaluation system allows an easy setup of Awaiba s NanEye GS sensor in a plug and play camera configuration. Image data is transferred to a PC over high speed USB3 link. The system controls the sensor's operations using an FPGA to define the state machine timings. Over the USB3 interface the user can have access to the sensor configuration and all sensor registers. DATE: 11/12/14 Version PAGE: 5/12

6 2 Idule Module General Specifications Image Sensor Shutter Type Global Shutter Total Pixel Number Cell Size Image Circle 640 (H) x 640 (V) 3.6 μm (H) x 3.6 μm (V) 3.258mm Video Output Frequency Pixel Clock 50MHz Video Output Data Output Chroma Max Frame Rate USB 3.0 / 2.0 : RAW 10 bit digital LVDS RGB / BW Power Requirements USB Bus Power (5.0V ±5 %) Power Consumption typ 0.9W max 1.1W 90 FPS Dimensions Head Cable φ:3.0mm L:2000mm Weight Control Box USB Cable Approx. 100g H: 20mm W: 40.3mm D: 80.3mm φ:5.0mm L:800mm Operation Environment Temperature 0 ~ +40ºC Humidity Storage Environment Temperature -25 ~ +60ºC Humidity 20 ~ 80%RH with no condensation 20 ~ 80%RH with no condensation Trigger Input Polarity Positive/Negative Selectable Input Signal Level Input Circuit Low 1.4V(Max), High 2.8~5.0V Table 1: Specifications DATE: 11/12/14 Version PAGE: 6/12

7 2.1 Connectors USB 3.0 Connector Type A Figure 1: USB Connector CN1 Pin No Name 1 VBUS 2 D - 3 D + 4 GND 5 StdA_SSRX - 6 StdA_SSRX + 7 GND_DRAIN 8 StdA_SSTX - 9 StdA_SSTX + Table 2: Description of USB Connector CN1 DATE: 11/12/14 Version PAGE: 7/12

8 2.1.2 External Trigger Input Connector Figure 2: Control Box CN2 Pin No Name 1 Trigger Input 2 GND Table 3: Description of Control Box CN2 As an example of the signal that can be connected to the external trigger of the Idule Module, please take a look on the following features: Pulse generator: 1Hz, 3.08V, 10us. With this signal you can get sensor frame rate of 1 on Awaiba Viewer. On Awaiba Viewer you can chose Board: IduleCam0. After load, it will appear the Trigger Mode option (Normal - without trigger signal and Fixed - with trigger). It also has the trigger polarity option (Negative or Full Frame). DATE: 11/12/14 Version PAGE: 8/12

9 2.2 Dimensions Figure 3: Camera Head Figure 4: Control Box DATE: 11/12/14 Version PAGE: 9/12

10 3 Evaluation Software The evaluation system comes with the USB evaluation unit that receives data from the FPGA- Module with one Nan Eye GS and the windows software to run the camera on a PC in real-time. Image display and storage is provided. It has the following features: Possibility to adjust white balance automatically Possibility to save directly to compressed.avi streams of either the processed or the raw data Possibility to save snapshots in PNG and in PGM (saving the 10 bit raw data) Possibility to acquire black and white gain masks Dynamic Gain and Offset switching Load in runtime a new configuration. This software also contains some Image processing algorithms: Colour Reconstruction Gamma Correction (only for colour version) Pixel linear correction Adjust colour saturation Adjust brightness An API interface to the data stream is available for easy integration in existing display systems and evaluation of image processing algorithms. The most recent version of the software and manuals are available under: DATE: 11/12/14 Version PAGE: 10/12

11 3.1 How to Install Awaiba Viewer Please take a look into page 10, section 3, on Awaiba Viewer Quick Start file. Please find here the file. 3.2 How to Start Awaiba Viewer Please take a look into page 25, section 5.3, on Awaiba Viewer Quick Start file. Please find here the file. 3.3 How to Use Awaiba Viewer Please take a look into the NanEye GS - Awaiba Viewer file. Please find here the file. For additional information or assistance please contact our technical support through support@awaiba.com or visit our website on /support. DATE: 11/12/14 Version PAGE: 11/12

12 End of Document DATE: 11/12/14 Version PAGE: 12/12