Instruments in motion powered by Seven. Bench-Top Instruments. Portable Instruments. Multi-Parameter Instrument. ph/isfet.

Transcription

1 Bench-Top Instruments Portable Instruments Multi-Parameter Instrument ph/isfet Conductivity Dissolved Oxygen Ion Concentration Redox /mv Relative Humidity Temperature Instruments in motion powered by Seven

2 SevenEasy ph SevenEasy ph the nature of measurement :: Intuitive ph measurement for everyday work in the laboratory :: Improved quality of measurements through automatic functions :: Comprehensive service package including IQ/OQ/PQ SevenEasy S20 You and your instrument An instrument that meets all your requirements without stretching your budget. It originated from the synthesis of precise electrochemical measuring technology with innovative design and takes into account your most current requests regarding quality control, data managment and legal regulations. The user interface has been designed so that operating procedures are self-explanatory. Application possibilities range from independent battery-operated individual measurements through to detailed analysis, including global data acquisition and local network facilities. ATC The Automatic Temperature Compensation (ATC) feature allows the electrode signal to be corrected for the effect of temperature. Automatic endpoint This improves the reproducibility of your measurement data and safeguards the quality of your results. Automatic buffer recognition With this function you can choose the order in which you use your ph buffers for regular calibration. This speeds up calibration procedures and eliminates unnecessary error messages. Choose a 1-, 2- or 3-point calibration. 2

3 Seven Service Electrochemical instruments at your service Regular equipment qualification increases the uptime and accuracy of your instrument over many years. It is just one of a number of services that METTLER TOLEDO offer, tailor-made to suit your needs for all Seven instrument lines. A large number of different service solutions are available for the Seven bench-top range, from basic repairs through to comprehensive service options and equipment qualification. All meters are delivered with a signed manufacturer s certificate. Seven Service better assurance of your result. Easy Obviously so easy The clear, high-contrast display with its large digits allows you to read measurement results and other relevant information easily. Neither a program menu nor operating instructions are needed. Flexible in more ways than one The METTLER TOLEDO electrode stand can be used stand-alone or attached to the left or righthand side of the meter. This makes it ideal for both right and left-handed people and for use with other meters A comprehensive range of ph electrodes is given in the separate brochure entitled Electrodes in Motion powered by Seven (Order No ). Electrode condition You see right away whether your electrode is in good condition. Does it have to be cleaned or replaced? A pictogram immediately puts you in the picture. SevenEasy S20 Measuring range Resolution Accuracy ph ±0.01 mv ±1 Temperature C 0.1 C ±0.5 C Sensor inputs BNC, Cinch/RCA (NTC 30 kω) Interfaces RS232 (connection to printer or PC) Power requirements Power adapter (9 V, DC) or four AA batteries (not incl.) Size / Weight 180 x 180 x 65 mm / 610 g Package / Weight 370 x 320 x 165 mm / 3.1 kg Ordering info. Standard Equipment Order No. S20 (instrument) S20-K (kit) Includes instrument, electrode stand, operating instructions, declaration of conformity and test certificate As for S20, plus InLab 413, Guide to ph measurement and 2 each buffer sachets for ph 4.01, 7.00 and 9.21 (or 10.00)

4 SevenEasy conductivity SevenEasy conductivity the little wonder :: User-friendly operation for demanding users :: Excellent reproducibility due to improved sensor technology :: Integrated interface for data exchange SevenEasy S30 Unbeatable price/performance ratio The SevenEasy integrates all the basic functions of a professional conductivity meter and at the same time does not overstretch your budget. The range of electrodes is practically unlimited and the measurement accuracy even allows the analysis of purified water according to USP requirements. The S30 is truly a little wonder within the Seven line. If you want more operating convenience, the SevenMulti S70 or S47 are excellent alternatives. Mobility Both SevenEasy, ph and Conductivity can be connected to the line voltage or operated from batteries. Make SevenEasy independent of line power by inserting four AA batteries! Temperature compensation You can use three types of temperature compensation: linear, nonlinear (DIN 38404) and no compensation for purified water (USP). The SevenEasy S30 is ready for all types of samples. Self-diagnosis The S30 also has a self-diagnostic test program, just like the SevenEasy S20. The user can check the hard and software using an interactive dialog with the instrument. This is your personal guarantee that everything is working properly. 4

5 The right electrode for every application The S30-K is equipped with the robust multipurpose InLab 730 conductivity cell as standard. This cell covers a multitude of applications involving aqueous samples above 10 µs/cm. Samples that contain solvents should be measured with cells made of platinum and glass such as the InLab 710 or InLab 720. The high performance InLab 740 electrode can measure samples down to 0.01 µs/cm. The detailed specifications for each electrode are given in the separate brochure entitled Electrodes in Motion powered by Seven (Order No ). 4 measurement modes The SevenEasy S30 offers you all the different measurement modes and units: conductivity, TDS, resistivity and salinity. This eliminates the need for any manual calculations. Peripheral connections The S20 and S30 instruments are equipped with an RS232 interface as standard. You can connect a printer or a computer to SevenEasy : very convenient GLP support. Flexible calibration You can calibrate the meter as desired with conductivity standards of 84 µs/cm, 1413 µs/cm or ms/cm. If you know the exact cell constant, you can enter this manually and edit it anytime. This ensures maximum flexibility and measurement accuracy. SevenEasy S30 Measuring range Resolution Accuracy Conductivity 0.01 µs/cm 500 ms/cm ±0.5 % Temperature C 0.1 C ±0.2 C TDS 0.01 mg/l 500 g/l ±0.5 % Resistivity Salinity Sensor inputs Interfaces Power requirements Size / Weight Package / Weight MΩ cm ppt (parts per thousand) Practical salinity scale UNESCO 1978 Natural sea water UNESCO 1966b Mini-DIN RS232 (connection to printer or PC) Power adapter (9 V, DC) or four AA batteries (not incl.) 180 x 180 x 65 mm / 610 g 370 x 320 x 165 mm / 3.1 kg Ordering info. Standard Equipment Order No. S30 (instrument) S30-K (kit) Includes instrument, electrode stand, operating instructions, declaration of conformity and test certificate As for S30, plus InLab 730, Guide to conductivity determination and 2 each buffer sachets 1413 µs/cm and ms/cm

6 SevenMulti SevenMulti ph measurement expanded :: Modular system for ph, conductivity, ion concentration and ISFET :: Increased efficiency due to numerous automation options :: Supports GLP and current standards :: State-of-the-art data management with 1000 measurement data points SevenMulti Modular expansion at any time An ingenious instrument concept based on precise electrochemical measuring techniques combined with the latest solutions for your laboratory requirements. The instrument s modular design allows you to upgrade it at any time with a number of handy plug-in expansion units. You can now easily turn it into a dual channel instrument. To control the sample changer or check the instrument s status, all it takes is you local network. With SevenMulti you will find an overall sophisticated concept to meet the challenges of today and tomorrow. SevenMulti is available in four versions the models S40, S47, S70 and S80. Automatic recognition SevenMulti automatically recognizes a new module that has been installed. This makes changing from one parameter to another fast and easy. Electrodes and accessories The Seven electrode stand provides even more convenience and efficiency. Further practical Seven accessories and a selection of different electrodes are given at the end of this brochure. Professional calibration The 9 calibration points (maximum) with the choice of linear or segmented algorithms as well as user-definable buffers give the expert unlimited flexibility. 6

7 Communication modules The TTL and USB communication modules open up new worlds. Secure data management Take advantage of this level of convenience: saving, capturing and recalling of results, calibration and raw data, as well as displaying of graphs. Automation Peripherals such as sample changers and bar code readers can be connected to the SevenMulti to increase working efficiency. Conductivity according to USP SevenMulti supports you when you perform measurements according to USP (United States Pharmacopeia) rules. It even has a special USP mode! Always at your fingertips Context-sensitive Help texts are always available to support you at each operating step you are in. GLP support SevenMulti helps you with instrument, sensor, user and sample identification there is even a bar code reader. Text menus The backlit display and the text menus guide you safely through installation, calibration and measurement, and the control of peripherals. Measurement curve The SevenMulti has a dot-matrix display. If desired, you can display your results graphically. Calibration curve You can instantly display your calibration curve and check the linearity visually. 7

8 SevenMulti SevenMulti comes in 4 models a variety of functions and specifications SevenMulti S40 Professional ph meter Expandable to a two-channel system Data management with 1000 GLP data points Different types of measurement value determination Graphical display of the calibration curve Up to 9 calibration points Resolution selectable between / 0.01 / 0.1 SevenMulti S40 Measuring range Resolution Accuracy ph , 0.01, 0.1 ±0.002 mv (rel. mv) ±0.1 Temperature C 0.1 C ±0.1 C Sensor inputs Interfaces Power requirements Size / Weight Package / Weight BNC, 2 mm Ref., Cinch/RCA (NTC), 4 mm banana (PT1000) RS232 (connection to a printer or PC) Power adapter (9 V, DC) 190 x 240 x 65 mm / 985 g 370 x 320 x 165 mm / 4 kg Ordering info. Standard Equipment Order No. S40 (instrument) S40-K (kit) Includes instrument, electrode stand, protective cover, operating instructions, declaration of conformity and test certificate As for S40, plus InLab 413, Guide to ph determination and 2 each buffer sachets ph 4.01, 7.00 and 9.21 (or 10.00) SevenMulti S70 Conductivity meter of the luxury class Linear or non-linear temperature compensation USP-mode: satisfies the current requirements for purified water Manual input and presentation of the cell constant Choice of four commercially available or user-defined calibration standards Expandable to a two-channel system (ph/mv, ISFET or ION/pH) Expandable: sample changer, printer and bar code reader SevenMulti S70 Measuring range Resolution Accuracy Conductivity 0.01 µs/cm ms/cm ±0.5 % Temperature C 0.1 C ±0.1 C TDS 0.01 mg/l g/l ±0.5 % Resistivity Salinity Sensor inputs Interfaces Power requirements Size / Weight Package / Weight MΩcm ppt Mini-DIN RS232 (connection to a printer or PC), titrator output Power adapter (9 V, DC) 190 x 240 x 65 mm / 985 g 370 x 320 x 165 mm / 4 kg Ordering info. Standard Equipment Order No. S70 (instrument) S70-K (kit) Includes instrument, electrode stand, protective cover, operating instructions, declaration of conformity and test certificate As for S70, plus InLab 730, Guide to conductivity determination and 2 each calibration sachets 1413 µs/cm and ms/cm

9 SevenMulti S47 Two-channel ph and conductivity measurement Combines all functions of the S40 and S70 Clear, two-channel measurement thanks to large display Context-sensitive Help menu USP-mode: satisfies current requirements for purified water Supports user-defined calibration standards Alphanumerical keypad Comprehensive range of electrodes and accessories SevenMulti S47 Measuring range Resolution Accuracy ph , 0.01, 0.1 ±0.002 mv (rel. mv) ±0.1 Temperature C 0.1 C ±0.1 C Conductivity 0.01 µs/cm ms/cm ±0.5 % Temperature C 0.1 C ±0.1 C TDS 0.01 mg/l g/l ±0.5 % Resistivity Salinity Sensor inputs Interfaces Power requirements Size / Weight Package / Weight MΩcm ppt BNC, 2 mm Ref., Cinch/RCA (NTC), 4 mm banana (PT1000), mini-din RS232 (connection to a printer or PC), titrator output Power module (9 V, DC) 190 x 240 x 65 mm / 1120 g 370 x 320 x 165 mm / 4.2 kg Ordering info. Standard Equipment Order No. S47 (instrument) S47-K (kit) Includes instrument, electrode stand, protective cover, operating instructions, declaration of conformity and test certificate As for S47, plus InLab 413 and InLab 730, Guide to ph and conductivity determination and 2 each calibration sachets ph 4.01, 7.00 and 9.21 (or 10.00) and 1413 µs/cm and ms/cm SevenMulti S80 Ion meter of the super class Choice of 29 preprogrammed electrode types 5 measurement units: mol/l, mmol/l, ppm, mg/l and % Menu-guided addition or subtraction procedures Up to 9 calibration points Storage of the calibration data of 10 ISE with corresponding ID Complete range of electrodes for 22 ions SevenMulti S80 Measuring range Resolution Accuracy Concentration 1.00E E +9 ± last significant place ±0.5 % ph , 0.01, 0.1 ±0.002 mv (rel. mv) ±0.1 Temperature C 0.1 C ±0.1 C Sensor inputs Interfaces Power requirements Size / Weight Package / Weight 2 each: BNC, 2 mm Ref., Cinch/RCA (NTC), 4 mm banana (PT1000) RS232 (connection to a printer or PC) Power module (9 V, DC) 190 x 240 x 65 mm / 1120 g 370 x 320 x 165 mm / 4.2 kg Ordering info. Standard Equipment Order No. S80 (instrument) S80-K (kit) Includes instrument, electrode stand, protective cover, operating instructions, declaration of conformity and test certificate As for S80, plus InLab 413, instructions for ion sensitive measurements and 2 each buffer sachets ph 4.01, 7.00 und 9.21 (or 10.00)

10 SevenGo SevenGo ergonomic analysis :: Portable measuring instruments for ph, conductivity, oxygen and ion analysis :: Robust measuring system for use under difficult conditions :: Efficiency thanks to unique ergonomic design and ease of use :: Comprehensive service package including IQ/OQ/PQ SevenGo Working in the field becomes a pleasure The new METTLER TOLEDO SevenGo instrument line performs very impressively in the field. The portable measuring system is rounded off by the excellent quality of the sensors and ingenious accessories. SevenGo is future-orientated in so many respects and greatly simplifies your work. Enjoy your work with SevenGo. SevenGo electrode clip The rotatable electrode clip can be mounted on the left or the right of all SevenGo instruments. It allows single-handed measurement and saves space when the electrode is not being used. 10 What is IP67? The IP (Ingress Protection) standard consists of two digits: 6 means that SevenGo is completely dustproof; 7 means that SevenGo remains watertight for 30 minutes at a depth of 1 meter. Watertight and dustproof to IP67 SevenGo satisfies the requirements of IP67. This applies both to the entire measurement system with connected electrodes and to the instrument itself. SevenGo is ready for the worst possible measurement environments. Ergonomic masterpiece SevenGo fits your hand perfectly, irrespective of whether you are right or left handed. The size of the buttons is directly related to their importance. SevenGo is so easy to use that you really can save time with it.

11 At a glance SevenGo s large display shows all the relevant settings and highlights the most important items. You can read the measured value and check the condition of the electrode at a glance. Data management In the development of SevenGo, special attention was paid to the operation of the data memory. Data can be measured, saved and deleted faster and easier than with any other meter. ErGo the helpful assistant The field assistant ErGo is a synonym for perfect convenience when you carrying it and use it in production, in the laboratory or in the field. ErGo is continuously adjustable and can be used for a variety of functions. 1) ErGo fits your hand perfectly providing safe and easy operation. 2) Together with the strap supplied, ErGo takes the load off your hands. Enjoy the new freedom. 3) ph electrodes can be stored wet in ErGo and are immediately ready for use without watering caps. 4) ErGo converts SevenGo into a mobile bench-top instrument. Transport protection and workplace The newly developed SevenGo case provides lots of space to house all the important utensils, cables and electrodes you need. At the same time it can be used as a workplace. Thanks to its intelligent design and the specially developed electrode stand, the case becomes a mobile measuring station. The robust hard-surface construction is very easy to clean. 11

12 SevenGo pro SevenGo pro the small difference :: Intuitive menu operation using softkeys :: Separate operating modes for experts and routine use :: GLP memory for 200 data points :: Contact-free infrared communication :: Revolutionary accessories and advanced sensor technology SevenGo pro from A to Z professional The SevenGo pro meters use the same excellent sensors and cleverly designed accessories as the SevenGo SG2 and SG3 models. In addition, the SevenGo pro SG6, SG7 and SG8 instruments provide features that satisfy the highest demands of measurement accuracy and operating convenience. Choose yourself which portable measuring meter is the best solution for your electrochemical tasks. Infrared communication The IR interface sends data to your notebook without a cable connection, or to a printer or PC by means of an IR adapter. The IR window of SevenGo pro is hermetically sealed in the housing and provides the greatest possible protection against water and dust. Illumination The bright backlit display can be switched on as desired and facilitates your work under poor-light conditions. The interval for switching it off can be individually programmed, thus prolonging the lifetime of your batteries. Maximize operating convenience. Barometric pressure The SevenGo pro SG6 model for dissolved oxygen measures the air pressure using an integrated barometer. Fluctuations in air pressure are automatically compensated and the reproducibility of the oxygen measurement is correspondingly increased. 12

13 Expert mode The expert configures SevenGo pro undisturbed in the laboratory. The whole range of functions is available. Routine mode In this mode you can work really quickly with the SevenGo pro because the settings relevant for the measurement are fixed ready to select. Routine and Expert mode A concept that has proven successful with large analytical instruments has now been introduced with the SevenGo pro for portable measurements. Deactivation of all the functions not required for routine measurements converts SevenGo pro into a basic working instrument at the press of a button. Now, settings cannot be changed by mistake. Menu operation using softkeys Operate your SevenGo pro using softkeys, with interactive function boxes on the display. Instrument configuration and data management are carried out in this way, most flexibly and very conveniently. Menu guidance just like with big instruments! Three reliable sensors The SevenGo instruments are equipped with high-performance electrodes as standard. All three sensors are based on products that have proven themselves thousands and thousands of times, and which combine robustness with precise measurement technology: InLab 413 SG (IP67), low-maintenance ph electrode with Xerolyt polymer electrolyte and PEEK shaft InLab 737 (IP67), conductivity cell with minimum sample carryover and maximum linearity InLab 605 (IP67), an oxygen sensor based on precise process analysis Functions and equipment SevenGo SevenGo pro Model SG2 SG3 SG6 SG7 SG8 ph measurement mv measurement Relative mv Concentration (ISE) Conductivity TDS Resistivity Salinity Dissolved oxygen Barometric pressure Temperature Cond.: Linear temperature compensation Cond.: Non-linear temperature compensation Calibrations points Buffer groups 4 6 User-defined standards Manual entry of the cell constant Automatic and manual endpoint format Date and time Time interval measurement Display illumination Infrared interface Routine and expert modes Menu guidance using softkeys GLP-Data memory Use of ErGo Watertight according to IP67 Power: 4 AA batteries or 4 NiMH 13

14 SevenGo 5 Models SevenGo and SevenGo pro kit versions, functions and specifications B ELK FK2 FK10 ASK Content SevenGo Kit versions Only meters Kit with electrode Field kit 1.8 m Field kit 10 m Kit with ErGo Meter IP67 sensor with 1.8 m fix cable and clip IP67 sensor with 10 m fix cable and clip Field case with field electrode arm and cover ErGo (Field assistent) Common kit contents All versions are supplied with a wrist strap, four AA batteries, operating instructions, a test certificate and a declaration of conformity. SevenGo ph SG2 ph meter (IP67) for routine use Clear display of measured values and settings Continuous indication of electrode and battery status Automatic endpoint and buffer recognition as well as temperature compensation Data memory for 30 GLP data points 3-point calibration with predefined or user-defined buffers SevenGo SG2 Measuring range Resolution Accuracy ph ±0.01 mv ±1 Temperature C 0.1 C ±0.5 C Sensor inputs BNC (>10 12 Ω); NTC 30 KΩ (both IP67) Outputs -- Power requirements 4 AA batteries 1.5 V or NiMHaccumulators 1.3 V Operating environment C, % rel. humidity (non-cond.) Size / Weight 220 x 90 x 45 mm / 325 g (without batteries) Kit Description and sensors Order No. SG2-B Meter only SG2-ELK Electrode kit with InLab 413 SG (IP67) SG2-FK Field kit with InLab 413 SG (IP67) SG2-ASK Assistant kit with InLab 413 SG (IP67) SevenGo conductivity SG3 Conductivity meter (IP67) for everyday work Automatic endpoint recognition and temperature compensation Automatic buffer recognition 84 µs/cm, 1413 µs/cm or ms/cm Data memory for 30 GLP data points Clear display of measured value and settings Complete range of electrodes SevenGo SG3 Measuring range Resolution Accuracy Conductivity 0.01 µs/cm ms/cm ±0.5 % Temperature C 0.1 C ±0.2 C TDS 0.01 mg/l g/l ±0.5 % Resistivity Salinity Sensor inputs Outputs -- Power requirements Operating environment Size / Weight MΩcm ppt LTW 7 pin (IP67) 4 AA batteries 1.5 V or NiMH accumulators 1.3 V C, % rel. humidity (non-cond.) 220 x 90 x 45 mm / 325 g (without batteries) 14 Kit Description and sensors Order No. SG3-ELK Electrode kit with InLab 737 (IP67) SG3-FK2 Field kit with InLab 737 (IP67), 1.8 m cable SG3-FK10 Field kit with InLab 737/10m (IP67), 10 m cable SG3-ASK Assistant kit with InLab 737 (IP67)

15 SevenGo pro dissolved oxygen SG6 Professional oxygen instrument (IP67) Manual or automatic air pressure compensation with built-in barometer High-performance O 2 sensor Comprehensive range of accessories Data memory for 200 GLP data points Backlit display (applies to all SevenGo pro models) SevenGo pro SG6 Measuring range Resolution Accuracy Saturation % ±0.5 % Temperature ( C / F) C 0.1 C ±0.1 C mg/l, ppm ±0.5 % max Pressure mbar 1 ±1 Sensor inputs BNC (>10 12 Ω); NTC 22 KΩ (both IP67) Outputs IR to printer or PC via RS232 or USB Power requirements 4 AA batteries 1.5 V or NiMH accumulators 1.3 V Operating environment C, % rel. humidity (non-cond.) Size / Weight 220 x 90 x 45 mm / 325 g (without batteries) Kit Description and sensors Order No. SG6-ELK Electrode kit with InLab 605 (IP67) SG6-FK2 Field kit with InLab 605 (IP67), 1.8 m cable SG6-FK10 Field kit with InLab 605/10m (IP67), 10 m cable SG6-ASK Assistant kit InLab 605 (IP67) SevenGo pro conductivity SG7 Professional conductivity meter (IP67) Calibration also with user-definable standard or cell constant Linear and non-linear temperature compensation Measurement of purified water according to USP Data memory for 200 GLP data points Comprehensive GLP functions with sensor and sample identification SevenGo pro SG7 Measuring range Resolution Accuracy Conductivity 0.01 µs/cm ±0.5 % 1000 ms/cm Temperature ( C / F) C 0.1 C ±0.1 C TDS 0.01 mg/l g/l ±0.5 % Resistivity MΩcm Salinity ppt Sensor inputs LTW 7 pin (IP67) Outputs IR to printer or PC via RS232 or USB Power requirements 4 AA batteries 1.5 V or NiMH accumulators 1.3 V Operating environment C, % rel. humidity (non-cond.) Size / Weight 220 x 90 x 45 mm / 325 g (without batteries) Kit Description and sensors Order No. SG7-ELK Electrode kit with InLab 737 (IP67) SG7-FK2 Field kit with InLab 737 (IP67), 1.8 m cable SG7-FK10 Field kit with InLab 737/10m (IP67), 10 m cable SG7-ASK Assistant kit InLab 737 (IP67) SevenGo pro ph/ion SG8 ph/ion meter (IP67) for highest demands Simple ion concentration determination Time interval measurement with automatic data logging Data memory for 200 GLP data points Segmented or linear calibration as desired 5-point calibration with choice of 6 predefined and one user-defined buffer set SevenGo pro SG8 Measuring range Resolution Accuracy ph ±0.002 mv (rel. mv) ±0.1 Temperature ( C / F) ATC MTC 0.1 C ±0.2 C Sensor inputs Outputs Power requirements Operating environment Size / Weight BNC (>10 12 Ohm); NTC 30 KΩ (both IP67) IR to printer or PC via RS232 or USB 4 AA batteries 1.5 V or NiMH accumulators 1.3 V C, % rel. humidity (non-cond.) 220 x 90 x 45 mm / 325 g (without batteries) Kit Description and sensors Order No. SG8-B Only meter SG8-ELK Electrode kit with InLab 413 SG (IP67) SG2-FK Field kit with InLab 413 SG (IP67) SG2-ASK Assistant kit mit InLab 413 SG (IP67)

16 X-mate Pro X-mate Pro portable flexibilitiy, whatever the measurement :: Ergonomic, single-handed operation :: Practical module for every measurement parameter :: Automatic sensor recognition :: Programmable data logging Innovation through flexibility With the X-mate Pro and its various interchangeable sensors it is possible to measure a wide range of parameters with only one meter suitable for both field and laboratory work. Ergonomically designed for single-handed operation, the X-mate Pro is the ideal solution whatever your application: environmental monitoring, research and development, industry or education. The system is flexible and can be upgraded at any time. Automatic data logging X-mate Pro can even work when you are not around. The data logger mode allows the meter to take automatic readings at intervals ranging from one per minute to one every 24 hours. Sensor recognition Changing parameters is child s play thanks to the practical connection system and the integrated automatic sensor recognition. Always with you Trio-Mate is the best solution if you want to measure the three most common parameters, ph, conductivity, and dissolved oxygen. All the accessories and sensor modules are supplied in a compact case. Large memory For each individual parameter you can save, recall or print up to 199 measured data points together with date, time and identification number for every individual parameter. 16 Three kit-models X-mate Pro is available in three kits: Mono-Mate is for simple ph measurement, and Trio-Mate for ph, conductivity and dissolved oxygen. With Poly-Mate you decide which sensor modules you want to have in your case.

17 MX300 (instrument) Input resistance Input/output Material module Material sensor shaft Display with selectable Power requirements Battery life Areas of operation Regulatory compliance Size of instrument Size of sensor module Weight Specifications >10 12 Ohm RS232 (15- pole socket, female) ABS Polysulfone for ph sensor modules, Epoxy for all the others LCD dot matrix with 0.1/0.01/0.001 digits resolution 2 batteries type A4 or rechargeable NiMH 200 hours, with low- battery icon ºC, 90% RH bei 35 ºC, non-condensing CE, (EN & EN ), FCC part 15 class A 55 x 41 x 145 mm Module 183 x 55 x 40 mm, Shaft 135 x 12 mm 176 g (meter only), 273 g (with typical sensor module InLab 482) Ordering info Description Order No. MX300 Instrument without exchangeable sensor modules Ordering info Type Parameter Measuring range Order No. Mono-Mate Field kit ph, mv, C ph Trio-Mate Field kit ph, LF, DO, C As for InLab 482, 781 and InLab481 ph Sensor module ph, mv ph InLab482 ph Sensor module ph, mv, C ph InLab489 ISFET Sensor module ph, C ph InLab781 Conductivity Sensor module Conductivity, TDS, Salinity, C ms/cm InLab681 DO Sensor module Dissolved oxygen, C mg/l, % InLab581 Redox Sensor module mv, C mv InLab982 Duo-Module Sensor module As InLab 482 und 781 As for InLab 482 and InLab983 Trio-Module Sensor module As InLab 482, 781 und 681 As for InLab 482, 781 and InLab181 Temperature Sensor module C C InLab986 Air humidity Sensor module Relative humidity % BNC/Cinch BNC-Module ph, mv, C, ISE mv RS232 interface Communication module

18 Accessories Accessories the final touch 18 Accessories for SevenEasy and SevenMulti Order No. ph/mv expansion unit (SevenMulti ) Conductivity expansion unit (SevenMulti ) Ion/pH expansion unit (SevenMulti ) ISFET expansion unit (SevenMulti ) TTL communication module (SevenMulti ) USB communication module (SevenMulti ) SevenMulti protective cover Electrode stand, complete Sample changer Rondolino, complete Propeller stirrer incl. 2 stirring rods Seven/Rondolino stirrer driver Disposable cups for Rondolino, 1400 pcs Power adapter EU Power adapter US Power adapter UK Power adapter JP Accessories for SevenGo Order No. Communication USB infrared adapter RS232 infrared adapter BalanceLink ErGo accessories ErGo Field assistant ErGo Electrode tube ErGo -Adapter Other accessories SevenGo Clip Wrist strap Neck strap SevenGo bottom cap Rubber feet (2 pcs.) Clip cover Disposable protective cover (3 pcs.) Battery cover SevenGo sealing kit Field case accessory kit LTW/mini-DIN adapter (conductivity) Accessories for X-mate Pro InLab 982/983, Spare part ph electrode, plastic shaft, gel electrolyte, for Duo and Trio sensor module Order No Check plug for MX300 instrument RS232/interface module (for printer and PC) Retort stand holder BOD-Kit Sensor tip for magnetic stirrer Wrist strap Thermocouple (replacement for InLab 181) m extension cable, IP67, for sensor module m extension cable, IP67, for sensor module m extension cable, IP67, for sensor module Soft case DO membrane kit Electrode sinker BOD membrane replacement kit Battery compartment sealing kit Standard case (empty - accepts meter, 1 sensor & accessories) Large case (empty - accepts meter, 5 sensors & accessories) X-mate Pro Sets Mono-mate (instrument, ph electrode InLab 482 standard field case, buffer sachets) Trio-mate (instrument, ph InLab 482, conductivity and DO sensor module, large field case, buffer sachets)

19 Solutions and general accessories A comprehensive range of electrodes is given in the separate brochure entitled Electrodes in Motion powered by Seven (Order No ). Order No. ph 4.01 buffer sachets, 30 x 20 ml ph 7.00 buffer sachets, 30 x 20 ml ph 9.21 buffer sachets, 30 x 20 ml ph buffer sachets, 30 x 20 ml Rainbow I (3 x 10 sachets 20 ml 4.01/7.00/9.21) Rainbow II (3 x 10 sachets 20 ml 4.01/7.00/10.01) ph 4.01 buffer solution, colour red, 6 x 250 ml ph 7.00 buffer solution, colour green, 6 x 250 ml ph 9.21 buffer solution, colour blue, 6 x 250 ml ph buffer solution, 6 x 250 ml µs/ cm conductivity standard, 30 x 20 ml ms/ cm conductivity standard, 30 x 20 ml µs/ cm conductivity standard, 500 ml µs/ cm conductivity standard, 250 ml ms/ cm conductivity standard, 250 ml Accessories Plastic sample cups Zero oxygen tablets, 20 pcs Guide to ph measurement Guide to conductivity and dissolved oxygen Guide to ion selective measurement RS-P42 printer RS232 cable (SevenGo, SevenMulti ) Electrodes and accessories Order No. ph-electrodes InLab InLab InLab 413 SG (SevenGo ) InLab 413 SG / 10m (SevenGo ) InLab InLab 410 (ATC) InLab InLab 420 (movable sleeve junction) InLab 423 (micro) InLab 427 (puncture) S7-BNC cable (1.2 m) MultiPin-BNC/Cinch cable (1.2 m) Conductivity probes InLab InLab InLab InLab InLab 737 (SevenGo ) InLab 737 / 10m (SevenGo ) InLab 717 (Titration) SevenMulti -DL Series cable (conductivity) DO accessories InLab 605 (SevenGo ) InLab 605 / 10m (SevenGo ) InLab 605 Membranekit (3 pcs.& electrolyte) InLab 605 Electrolyte (25 ml) InLab 605 Sealing kit Electrode weight

20 METTLER TOLEDO a world of possibilities everything and much more The innovative electronic engineering of the Seven line has been combined with INGOLD s 50 years of experience in producing electrochemical sensors. METTLER TOLEDO is a system supplier for ph, conductivity, dissolved oxygen and ion measurements: Seven State of the art range of instruments Comprehensive range of electrodes Useful accessories All necessary technical services Quality certificate. Development, production and testing according to ISO Environmental man agement system according to ISO Worldwide service. Our extensive service network is among the best in the world and ensures maximum availability and service life of your product. European conformity. The CE conformity mark provides you with the assurance that our products comply with the most recent EU directives. On the Internet. You will quickly fi nd lots of essential information about our products, our services, and our company at METTLER TOLEDO gone global... the contact addresses of METTLER TOLEDO representatives globally can be found under the Internet address otherwise: Mettler-Toledo GmbH PO Box VI-400, CH-8606 Greifensee Tel Fax Pubished by: Mettler-Toledo GmbH, Analytical, CH-8603 Schwerzenbach, Switzerland Telefon , Fax , Internet: Subject to techical changes 12/2004 Mettler-Toledo GmbH, Printed in Switzerland, ME B