Installation Guide Version 6.2

Transcription

1 EV3151 & EV3151A Box IP Camera Installation Guide Version 6.2 TEL: F, Block C, Nan Kang Software Park, 19-5 San-chung Rd., Nan Kang District, Taipei 115, Taiwan

2 About This Guide Model EV3151A EV3151 Before Using EtroStation Pro Check the PC requirements Review the OS platform requirements Read an special and import precautionary information Having basic knowledge of network setup and configuration will be helpful Important Announcements NOTE: This icon represents a tip for operation. CAUTION: This icon stands for an action that could affect an operation or mildly impair the system. WARNING: This icon indicates an action that will likely impair the system. Disclaimer 2007 Etrovision Technology. All rights reserved. EtroLink & AnyUSB are trademarks of Etrovision Technology; other product or service names mentioned herein are the trademarks of their respective owners. Information contained in this document may be superseded by updates. No representation or warranty is given and no liability is assumed by Etrovision Technology with respect to the accuracy or use of the information, or infringement of patents or other intellectual property rights. No licenses are conveyed, implicitly or otherwise, under any intellectual property rights.

3 About This Guide 1 PRODUCT OVERVIEW Introduction Product Specifications...1 EV EV3151A EV3151 & EV3151A Differences Dual Streaming Capabilities Resolution Package Checklist Product CD Language Support Video Server Outer View Physical Connections...5 EV EV3151A USING THE EV3151 FOR THE FIRST TIME Initial Requirements...7 Software Requirements...7 Install EtroScan Physical IP Camera Connections...8 Connect to the Network...8 Connect CCTV to Video Server...8 Connect PTZ (EV3151 Only)...8 Connect mini DIN (EV3151A Only)...8 Connect Audio In/Out (EV3151A Only)...8 Power on IP Camera Initial Network Configuration...8 Factory IP Address...9 Using EtroScan...9 Change Network Setting via EtroScan Access the IP Camera Web Interface ETROLINK CONFIGURATION PORT...15

4 About This Guide 3.1 OS Requirements Setup Using the EtroLink Config Port Connecting the IP camera to the PC...15 Quick Config Login Quick Wizard - Network Manually Starting the Quick Config Wizard Factory Default Missing root Password CAMERA LED INDICATORS ADDITIONAL INFORMATION...24

5 1 PRODUCT OVERVIEW 1.1 Introduction This manual covers the EV3151 and EV3151A models. For simplicity, EV3151 will be used to refer to both models unless there is a need to differentiate between the two models. 1.2 Product Specifications EV3151 System Compression Video/Audio IP Network Mechanical Info Pan/Tilt/Zoom Minimum System Requirements Management & Support Model EV3151 CPU ARM 9 Based 32 Bit RISC SDRAM 128 MB Flash 16 MB Embedded OS Linux 2.6 M-JPEG, MPEG-4, H.264 Dual Stream Format Simultaneously Up to 30fps (NTSC) / 25fps D1 Frame Rate Resolution Bit Rate Video Resolution Video Input Ethernet Protocol Power Supply Dimension Weight MJPEG: 5 Video Quality Level Selectable; MPEG-4/H.264 : 64K~4Mbps NTSC: D1 (720x480), CIF(352x240), QCIF(176x120) PAL: D1 (720x576), CIF(352x288), QCIF(176x144) 1CH, NTSC/PAL, BNC Connector, 1.0Vp-p with 75 Ω Loading 1.0Vp-p with 75 Ω Loading RJ45-10/100 Base-T TCP/IP, DHCP, PPPoE, HTTP, DDNS, NTP, FTP, SMTP, UDP, RTP, RTSP, 3GPP, UPnP DC 12V / 350mA 31(H)X61(W)X70(D)mm 170g PelcoP, PelcoD, DynaColor, Merit_Lilin, Visca, Protocols Transparent Baud Rate 1200, 1800, 2400, 4800, 9600, Connector RS-485 for PTZ Control CPU Pentinum 4, 2.4GHz and Above Hard Disk 40 GB or Above Memory 512 MB or Above Operating System Video Resolution Software Configuration Integration USB Port Windows XP with SP2 or Above / Windows 2000 with SP4 or Above SVGA or XGA with 1024x768 Resolution DirectX 9.0C or Above EtroScan Utility EtroSDK 3.0 Support (Windows, Linux, CGI) EtroLink Config Port / Mini-USB Female Socket for Network Setting 1

6 1 PRODUCT OVERVIEW Web Browser Security Temperature Operating Environment Humidity Supplied Accessories Microsoft Internet Explorer 6.0, or Above Password Protection 0 ºC ~ 40 ºC (32 ºF ~ 104 ºF) 20% ~ 80% RH Power Adapter, USB Cable, Mini-Din Cable, CD-ROM (User Manual, Free Bundle NVR) EV3151A System Compression Video/Audio Model EV3151A CPU ARM 9 Based 32 Bit RISC SDRAM 64 MB Flash 16 MB Embedded OS Linux 2.6 M-JPEG, MPEG-4, H.264 Dual Stream Format Simultaneously Up to 30fps (NTSC) / 25fps D1 Frame Rate Resolution Bit Rate MJPEG: 5 Video Quality Level Selectable; MPEG-4/H.264 : 64K~4Mbps NTSC: D1 (720x480), CIF(352x240), QCIF(176x120) Video Resolution PAL: D1 (720x576), CIF(352x288), QCIF(176x144) 1CH, NTSC/PAL, BNC Connector, Video Input 1.0Vp-p with 75 Ω Loading 1.0Vp-p with 75 Ω Loading Audio Input 8 khz Stereo, ADPCM Audio Output 8 khz Stereo, ADPCM Connector 3.5mm Input/Output Wireless Wi-Fi IEEE b/g *External USB Adapter Support Ethernet RJ45-10/100 Base-T IP Network TCP/IP, DHCP, PPPoE, HTTP, DDNS, NTP, Protocol FTP, SMTP, UDP, RTP, RTSP, 3GPP, UPnP Power Supply DC 12V / 350mA Mechanical Info Dimension 31(H)X61(W)X70(D)mm Weight 170g PelcoP, PelcoD, DynaColor, Pan/Tilt/Zoom Protocols Merit_Lilin, Visca, Transparent Baud Rate 1200, 1800, 2400, 4800, 9600, Connector RS-485 for PTZ Control CPU Pentinum 4, 2.4GHz and Above Hard Disk 40 GB or Above Minimum System Memory 512 MB or Above Requirements Management & Support Windows XP with SP2 or Above / Operating System Windows 2000 with SP4 or Above Video Resolution SVGA or XGA with 1024x768 Resolution Software DirectX 9.0C or Above Configuration EtroScan Utility Integration EtroSDK 3.0 Support (Windows, Linux, CGI) EtroLink Config Port / USB Port Mini-USB Female Socket for Network Setting Web Browser Microsoft Internet Explorer 6.0, or Above Security Password Protection 2

7 1 PRODUCT OVERVIEW Operating Environment Supplied Accessories Temperature 0 ºC ~ 40 ºC (32 ºF ~ 104 ºF) Humidity 20% ~ 80% RH Power Adapter, USB Cable,Mini-Din Cable CD-ROM (User Manual, Free Bundle NVR) 1.3 EV3151 & EV3151A Differences Features EV3151 EV3151A Video In Yes Yes Audio I/O No Yes PTZ Yes Yes Digital I/O No Yes Wireless USB Port No Yes 1.4 Dual Streaming Capabilities Simultaneous dual streaming is supported. Combination options include: Stream 1 Stream 2 H.264 M-JPEG H.264 MPEG-4 H.264 H.264 M-JPEG MPEG-4 M-JPEG H.264 M-JPEG M-JPEG MPEG-4 H.264 MPEG-4 MPEG-4 M-JPEG MPEG-4 If users assign the same stream format for both Stream1 and 2, the image may be unable to achieve real-time performance. This is a system limitation. 3

8 1 PRODUCT OVERVIEW 1.5 Resolution Resolution D1 CIF QCIF NTSC 720x x x120 PAL 720x x x Package Checklist The EV3151 packaging will include the following materials. EV3151/EV3151A Video Server x 1 Power Adapter x 1 USB Cable x 1 Mini DIN Cable x 1 Product CD x Product CD The product CD contains EtroStation 3.0 NVR management software 16CH Live View/Recording/4CH Playback User s Manual 1.8 Language Support English 4

9 1 PRODUCT OVERVIEW 1.9 Video Server Outer View 1.10 Physical Connections EV V DC Power Input 2. RJ-45 Network Cable Port 3. EtroLink USB Config Port 4. BNC Video In 5. RS-485 PTZ Port 6. Power LED 5

10 1 PRODUCT OVERVIEW EV3151A 1. Audio I/O 2. BNC Video In 3. mini DIN port 4. Power LED 5. EtroLink USB Config Port 6. WiFi USB Port 7. RJ-45 Network Cable Port 8. 12V DC Input 6

11 2 USING THE EV3151 FOR THE FIRST TIME 2.1 Initial Requirements Software Requirements Installation and configuration require the following: Microsoft Windows 2000 or XP Operating System Microsoft Internet Explorer version 6 or higher Other browsers (i.e. Mozilla Firefox) are not currently supported. Install EtroScan EtroScan is a utility is used to configure network settings for IP cameras and other devices (i.e. NVR). EtroScan is available via two methods. Install EtroStation 3.0 EtroStation 3.0 includes the EtroScan utility. EtroStation is on the product CD that accompanies the EV3151. Please refer to the EtroStation documentation for installation instructions. Download from Etrovision s Website EtroScan can also be downloaded from Etrovision s website. It is available in the Software Tools section of the Download area, Download_list.aspx?no=5. After downloading the archived file, extract the contents and run Setup.exe to install EtroScan. 7

12 2 USING THE EV3151 FOR THE FIRST TIME 2.2 Physical IP Camera Connections Connect to the Network Connect the EV3151 to network hub/switch via a standard CAT5 Ethernet cable with an RJ-45 connector. Please note that the PC must be on the same network domain as the IP camera. Connect CCTV to Video Server Use the BNC Video In port to connect the camera with the EV3151. Connect PTZ (EV3151 Only) For PTZ functionality, connect the PTZ device to the EV3151 RS-485 PTZ port. Properly align the wiring and terminals when connecting; an improper connection can damage the camera. Connect Audio In/Out (EV3151A Only) For audio functionality, connect the audio input cable. Video flicker may occur when enabling/disenabling audio. This situation normally only lasts for a second. Power on IP Camera Connect the power adapter to the power connector. The adapter should be connected to 110v~22OV AC socket. There is no power button on the camera, so connecting/disconnecting the power adapter will start/shutdown the IP camera. 2.3 Initial Network Configuration To configure the IP camera s network settings use the EtroScan utility Factory IP Address Below are the initial factory IP address settings for the IP camera: 8

13 2 USING THE EV3151 FOR THE FIRST TIME IP Address Subnet Mask Gateway Using EtroScan EtroScan allows users to easily find an IP camera and configure the settings. Select EtroScan from the start menu to start. 9

14 2 USING THE EV3151 FOR THE FIRST TIME Press the Scan button to list the IP and MAC address list for IP cameras on the network. A new IP camera will display the factory IP address, However, if multiple new devices are present on the network, then multiple instances of will be listed. 10

15 2 USING THE EV3151 FOR THE FIRST TIME To identify a specific IP camera, use the MAC address which is located on the bottom of the camera. Below is an example of the label displaying the MAC address. Change Network Setting via EtroScan There are two ways to modify the network settings. 1. Double click on a specific IP address; the setting page will be displayed. 2. Click Change Setting button at the bottom of the screen. Either method will display the network settings configuration. 11

16 2 USING THE EV3151 FOR THE FIRST TIME After altering the IP camera network settings, click Apply. A prompt for the administrator authentication will be displayed: The default password for the administrator account (root) is pass. Enter the default password and click OK to confirm the changes. After applying the new network settings, the IP camera will reboot; this process takes about 45 seconds. The IP camera s Power LED light will blink during the reboot process; the light will become stable once reboot is complete. Exit the Setting Page by clicking Close, and wait for the reboot to complete. After rebooting, press Scan to verify the new IP address. If using DHCP, then the MAC address may be necessary to accurately identify a specific camera. Press Exit to quit EtroScan. 2.4 Access the IP Camera Web Interface MS Internet Explorer is used to access and configure the IP camera. When accessing an IP camera using the web interface for the first time, some configuration for ActiveX controls may be required. 1. Open the IE browser 2 Type in the IP address of the IP camera 3. Enter the administrator username and password: User name: root Default password: pass 12

17 2 USING THE EV3151 FOR THE FIRST TIME Press OK button to access to the Live View web page. Usernames and passwords are case sensitive. The administrator password should be changed after installation is complete. Please refer to the User Manual for more information Upon login, the error ActiveX control failed to load (OCX) may be encountered. The error indicates the browser requires adding certain ActiveX controls for the viewer to work. Near the top of the browser page is a message regarding an add-on to run. The request is highlighted below in blue. 13

18 2 USING THE EV3151 FOR THE FIRST TIME Clicking on the add-on message will bring up options; choose Run Add-on to add. A confirmation message box will be displayed; choose Run. Wait for the add-on to complete and the page to attempt reloading. Most likely other ActiveX controls will be required. Repeat the above procedure of adding ActiveX controls until the no other add-on requests are displayed and the Live View page loads without error. 14

19 3 ETROLINK CONFIGURATION PORT The EtroLink USB Configuration Port provides an alternate method of configuration. The EtroLink USB Configuration allows configuration using a Quick Config Wizard which requires no software installation. 3.1 OS Requirements The PC which will access the IP camera using the EtroLink USB port requires the following to run the EtroLink Quick Config Wizard: Windows XP (all editions) Windows 2000 (all editions) Windows 98 (SE) Windows XP should run the wizard automatically. Windows 2000 and 98(SE) require manually running the EtroLink Quick Config Wizard. 3.2 Setup Using the EtroLink Config Port The following discusses using the EtroLink Config Port using Windows XP. With the exception of the automatic execution of the Quick Config Wizard, the process is the same among all the Microsoft versions noted above. A demonstration of how to manually start the Quick Config Wizard will be provided at the end of this section. Connecting the IP camera to the PC 1. Unplug the IP camera s power cable and network cable 2. Connect EtroLink and PC via the mini USB cable. 3. Once the PC detects the IP camera, wait for a pop-up dialog prompting the user for a program choice. 4. Config Wizard should already be highlighted; click OK. 15

20 3 ETROLINK CONFIGURATION PORT The Quick Config login screen will be displayed. Quick Config Login Unless the password has already been modified, use the default administrator login is: ID: root Password: pass NOTE: restoring factory settings will restore default login password. Click the Login button; the Status page will then be available 16

21 3 ETROLINK CONFIGURATION PORT Quick Wizard - Network The Quick Wizard button is used to configure network and DDNS settings. Clicking Quick Wizard will display Step 1. Step 1 The network configuration options include Static IP, DHCP, and PPPoE. Select an option and click Next. Step 2 Selecting Static IP and clicking Next: 17

22 3 ETROLINK CONFIGURATION PORT Selecting DHCP and Next: Selecting PPPoE and Next: Enter all the relevant network settings, and click Next. Step 3 Regardless of network connection type, step 3 and 4 are the same. 18

23 3 ETROLINK CONFIGURATION PORT Change the port information if applicable, and then click Next. First a confirmation dialogue will be displayed. Click OK to proceed to Step 4. Step 4 Select Setup DDNS to configure DDNS or Finish to exit the Quick Config Wizard. Manually Starting the Quick Config Wizard When using Windows 2000 or 98, the EtroLink Quick Config Wizard will not be automatically started after connecting the IP camera and PC. To start it manually:. 1. Connect the IP camera and PC using the mini USB cable. 2. Wait a moment for the PC to recognize the IP camera as a new drive. 3. Using Windows Explorer, find the IP camera represented as a new drive. The Etrovision logo should help identify the specific drive. 19

24 3 ETROLINK CONFIGURATION PORT 4. Highlight the drive (i.e. E:) to view he contents. 5. Find the ClickMeFirst HTML file, and double click. The Quick Config utility will be initiated using Internet Explorer. 3.3 Factory Default The factory default settings can be restored using the Quick Config Wizard. Restoring factory settings will result in the loss of the current IP camera s configuration. In the User s Manual, see System Configuration in the Maintenance chapter for more information on backup & restore functionality. From the Quick Config Status page, click Factory Default. Click OK to proceed. Disconnect the IP camera from the PC and click OK. The IP camera can now be accessed via the factory default network settings. 20

25 3 ETROLINK CONFIGURATION PORT 3.4 Missing root Password If the root password has been forgotten, then factory settings will need to be restored using the EtroLink USB port. At the Quick Config login screen, use CTRL+ALT+F to restore factory settings Type CTRL+ALT+F: Click OK Click OK The following message shows that the operation is complete. 21

26 3 ETROLINK CONFIGURATION PORT Click OK The video server/camera will now be configured with the default IP address, and the default username/password of root/pass. Use EtroScan or the Web UI to manually reconfigure the device, or a backup configuration can be restored if available. 22

27 4 CAMERA LED INDICATORS The IP camera back (or combo cable if an outdoor or dome camera) has 3 LED indicators which display the camera state or activities. Red: the power LED Green: network connection LED Orange: network transmission LED The table below highlights various camera states and corresponding Power LED indicators. CAMERA STATE Booting Camera operational Connected to the network Upgrading firmware Firmware upgrade completed Rebooting Power LED Blinking light Stable light* Stable light* Blinking light Stable light* Blinking light 23

28 5 ADDITIONAL INFORMATION For more information on the EV3151 and EV3151AVideo Server, please see the firmware User s Manual. These manuals are available on the product CD, or they can be downloaded from the Etrovision website, In addition, the latest firmware releases and other product documentation are available in the Download area. 24