DATASHEET. Wirnet Station 868. LoRaWAN gateway for smart IoT chain

Transcription

1 Wirnet Station 868 LoRaWAN gateway for smart IoT chain 868 MHz ISM band LongRange bidirectional communications capabilities Embedded, remote and open low power communication station Open development framework based on standard Linux OS WAN connectivity over GPRS/EDGE/3G or Ethernet 1. Hardware Key Features 1.1 System CPU: - Based on ARM 926 EJS core processor - Up to 230 MIPS - Real-time clock saved by battery - Hardware watchdog - Optimized power consumption management Volatile memory: - Low power DDRAM 128 MB - 10 MB used for system firmware Non-volatile memory MB NAND flash (40 MB used for system firmware and auto recovery mechanism) - 8 GB emmc 1.2 User interfaces Internal LEDs: - Operational status: power, GSM signal strength level, WAN connectivity indicator USB host interface allowing:

2 - Local software upgrade with simple USB key - USB/NET local configuration/maintenance access Internal push buttons: - Manual station resets - Manual test or installation procedure launch 1.3 Communication LongRange - Incorporate LoRa bidirectional communications technology (Rx: MHz, TX: MHz) - Sensitivity: up to -141 dbm - Tx conducted power from 0dBm to +27dBm - 49 LoRa demodulators over 9 channels - More than 15 km range in sub-urban situation - More than 2km range in urban situation WWAN: - HSDPA/UMTS (900/2100MHz): DL 7,2Mbps/UL 5,6 Mbps (HSDPA), UL/DL, 384Kbps (UMTS) - GPRS/EDGE (850/900/1800/1900): UL/DL 85.6Kbps (GPRS), UL/DL Kbps (EDGE) - IMEI inside - Internal antenna Ethernet: - PowerOverEthernet IEEE 802.3af alternative compliant 1.4 Positioning & Timing GPS: - Integrated GNSS high sensitivity GPS module - NMEA 2.0 compliant - Internal antenna 1.5 Sensors - Embedded temperature sensor - Door opening detection system 1.6 Power - PowerOverEthernet supply: 48V class 0 (Max: 15Watts, nominal: 3 Watts (LoRa Rx mode with GSM network attachment) - DC power supply (ex: solar panel use): 11 to 30 Volts

3 - Power control: ignition detection, software off switching - Back up battery (up to about 1 minute allowing safe power down) 1.7 Mechanical Polycarbonate enclosure Dimension: 315 x 170 x 215 (including mounting kit) - Weight: about 2 kg (including mounting kit) N connector Cable gland 1.8 Mounting The provided mounting kit allow three different mounting options: - Wall mounting by screwing - Pole mounting by U-bolt (max diameter: 60mm) - Metallic strapping mounting (tube, pipe, flue ) The provided mounting kit can be split to install the antenna apart 1.9 Environmental - Full operating range: -20 to Humidity: 95% non-condensing (protective vent) - MTBF: 20 years (according to MIL-HDBK-217F) non-contractual - Ingress protection: IP67 - Impact resistance: IK08 - UV resistance: UL508 - Flammability rating: UL94-V Certification - Directive RED 2014/53/EU - Low Voltage Directive 2014/35/EU - Electromagnetic Compatibility Directive 2014/30/EU

4 - The limitation of exposure of the public to electromagnetic fields specified in the Council Recommendation 1999/519/EC - Electromagnetic compatibility: o EN issue o EN issue o EN issue o EN issue Efficient use of the radio frequency spectrum o EN issue o EN issue o EN issue o EN issue o EN issue o EN issue Safety (Article 3.1-a of the R&TTE directive) o EN ed /A11: 2009/A1: 2010/A12: Magnetic field exposure o EN ed o EN ed. 2010

5 1.11 Hardware block diagram 2. Software key features 2.1 Operating system - Standard long-term support Linux version File system UBIFS (NAND) and EXT4 (emmc) - Support Of all GNU/Linux tools (cross-compiled for ARM) - POSIX1 file system - TCP/IP BSD4.4 socket on network bearer 2.2 Software packages included (non-exhaustive) - Python - SQLite - Optional: JAVA Oracle Ojec VM (J2M2 compliant based on CDC profile)

6 Networking: - DHCP client and server - FTP server - SSH server - NFS client - Firewalling (iptables) and IP routing (layer 3) - HTTP server - TFTP server - L2TP tunneling 2.3 KERLINK M2M services interfaces - Simple and reduced interface using XML format over TCP/IP socket providing value added services based on action programming - Mobile SMS management - System alarm (memory and CPU usage, hardware failure) - Internal statistic delivery - Automatic or manual bearer selection - Power control management - Optional - Wanesy ready to remote supervision, maintenance and HQ data transfer. 2.4 Software development tools - C/C++ Linux cross compilation toolchain based on GNU tools (GCC 4.9.3, Glibc 2.23) - User manual and KERLINK M2M services description - Complete C-source code set of examples for remote and embedded application - On-line wiki - Optional debug probe 3. Optional accessories Antennas: various antenna can be offered to adapt to environment (omnidirectional, directional, high gain )

7 4. In option: Wanesy Ready Wanesy is a M2M platform provided by KERLINK to: - Interconnect devices with customer ERP - Supervise remote device (status, alarm, log...) - maintain (remote maintenance, update and control) 1 Rue Jacqueline Auriol THORIGNE FOUILLARD