Model Name Description Page. DVI Extender over Single Cat.X. DVI Passive Extender over Single Cat.X. 1x2/ 1x4/ 1x8 DVI Splitter with HDCP Support

Transcription

1 VI VI Extender / istribution Amplifier / Matrix Why VI Series? Except HMI, VI also plays a very important role in digital A/V market. For example, VI is the only transmission format which Mac provides. Besides, comparing with HMI, the most obvious strength of VI is equipped with screws for fixness. This feature can hugely reduce damage occurred because of connection looseness. Therefore, VI is very suitable for digital signage which needs a stable connection and a high resolution video. GoMax like HMI series, we provide you a whole series choice, including Extender, istribution Amplifier and Matrix in VI format. By these different products, any application requirement from customer can be met. t only the products of VI series can be integrated with each other, they also can work with our other HMI products. Undoubtedly, this integration feature will be the most powerful weapon for you to open igital A/V Market. Name escription Page CV- CV-V CV-/CV- SP-00E/SP-00E/SP-008E SP-00/SP-00/SP-009 MA-88H VI Extender over Single Cat.X VI Extender over Single Cat.X with HBaseT, RS- and Audio VI Passive Extender over Single Cat.X x/ x/ x8 VI Splitter with HCP Support x/ x/ x9 ual Link VI istribution Amplifier x VI Splitter with RS- x VI Splitter over Single Cat.X with HCP Support 8x8 VI Matrix with HCP Support

2 VI Extender over Single Cat.X VI compliance x VI imensions 8 x xmm [." x." x "] +V V RJ-IN x CV- [TX & RX] x C V A wall wart VI.0 compliant Handy VI- to RJ- adapter with programmable EI feature Extends the transmission length from the sources up to 0m (00ft) at XGA (0x8@0Hz) and 0m (00ft) at WUXGA (90x00@0Hz) Minimize the cable skew by adjustable 8-level equalization control Supports 080i/080p HTV resolutions & VESA standards Receiving unit can learn EI information for VI/HMI enabled display device irect plug-in at TX and wall-mounting with screws at RX Perfectly integrated with other VI over Cat.X series products CV-V-TX Audio output CV--RX 0 x 90 x 0mm [." x." x "] 0 x x 80mm [0." x.9" x."] 0 x 0 x 00mm ['" x '" x.8"] 9g [8.oz] 000g [. lbs] Wall-mount with screws V A C. Watts [max] CV-V[TX] 0~80 C [~ F] -0~80 C [-~ F] RS- INPUT +V C RJ Power LE VI- INPUT Signal LE Audio +V C Power LE 0 VI- OUTPUT Audio 0~90% RH [no condensation] CV-V[RX]. Watts [max] -0~0 C [-~0 F] 0~90% RH [no condensation] 0~0 C [~0 F] VI-IN RJ-OUT V A C E-9 [9-pin -sub male] WE/SS 8P8C with LE indicators. Watt [max] Wall-mount with screws x RS- VI-I [9-pin female digital only] Audio input 0g [. lbs] x RS-.mm connector imensions 8g [.oz] x VI + x.mm 0 x x 80mm [0." x.9" x."] irect plug-in x RJ x RJ Rotary switch 0 x 0 x 00mm ['" x '" x.8"] EQ / EI VI-OUT INICATION evice x VI + x.mm E-9 [9-pin -sub female] RJ connector 0 x 0 x 0mm [" x." x 0.8"] Host VI connector EQ 0g [.8oz] -layer board [impedance control differential 00Ω; single 0Ω] RS- connector In / Out Plastic molding x VI WE/SS 8P8C with LE indicators [] Human body model ±9kV [air-gap discharge] & ±kv [contact discharge] [] Core chipset ±8kV Volts [peak-to-peak, TTL] C signal RS- support VI [9-pin female digital only] Rotary switch Auto x RJ- x RJ- RJ- connector Stereo channel audio TMS signal IR pass-thru -layer board [impedance control differential 00Ω; single 0Ω] VI connector 080p@0 00m (0ft) [CATe] [] Human body model ±9kV [air-gap discharge] & ±kv [contact discharge] [] Core chipset ±8kV VI over UTP ES protection Volts [peak-to-peak, TTL] 80p / 0p / 080p0/ / 8-level digital at RX ES protection 0MHz [0.Gbps] audio for VI signal C signal VI. 90x00@0Hz 0m [00ft] 0x8@0Hz 0m [00ft] TMS signal CV--RX HCP compliance Up to WUXGA [90x00@0Hz] & UXGA [00x00@0Hz] CV-V-TX VI.0 Single-link MHz [.9Gbps] Video transmission over category cable CV-V HMI compliance HCP compliance CV-[TX] Name INICATION CV- CV-[TX] aka CV- CV-V CV- Transmitter Name VI VI VI Transmitter - VI Extender over Single Cat.X with HBaseT, RS- and Audio RS- OUTPUT RJ Signal LE 8 9 x CV-V [TX & RX] x V power supply unit VI.0 compliant EI & HCP Bypass Extends the transmission length from the sources up to 00m (0ft) at XGA (0x8@0Hz) and UXGA (00x00@0Hz) Auto equalization Supports HTV resolutions & VESA standards Supports serial port RS- [TX & RX] control irect plug-in at TX and wall-mounting with screws at RX -

3 x/ x/ x8 VI Splitter with HCP Support VI VI VI VI Passive Extender over Single Cat.X VI Transmitter CV- CV- Name VI compliance m [0ft] C signal Volts [peak-to-peak, TTL] Spare USB power jack ES protection -layer board [impedance control differential 00Ω; single 0Ω] x VI x RJ- x VI x RJ- x RJ- x VI x RJ- x VI VI connector mini USB CV- Plastic mold [TX/RX] 0x0x0mm [ x. x 0.8 ] 0 x x 0mm [. x. x. ] [TX] 0g [.8 oz] 80g [. oz] x VI / HMI [.ch audio & video] x VI / HMI [.ch audio & video] VI connector VI-I [9-pin female digital only] USB connector Standard type-b [square shape] 0. Watt [max] 0~0 C [~0 F] -0~0 C [-~0 F] imensions Mini USB for RX 0. Watt [max] Feasible via USB-port Volts [peak-to-peak, TTL] 8g [. oz] irect plug-in -layer board [impedance control differential 00Ω; single 0Ω] INICATION 0 x 0 x 00mm [ x x.8 ] [] Human body model ±9kV [air-gap discharge] & ±kv [contact discharge] [] Core chipset ±kv C signal CV- TS-H Master Audio, olby TrueHM olby igital, TS, V-Audio, LPCM, SAC, MPCM TMS signal WE/SS 8P8C with LE indicators USB connector Single-link MHz [.Gbps] Up to WUXGA [90x00@0Hz] & UXGA [00x00@0Hz] Firmware update VI-I [9-pin male digital only] RJ- connector TMS signal HMI eep Color & HCP compliance audio for VI signal VI. HMI compliance 90x00@0Hz m [80ft] 0x8@0Hz 0m [00ft] 0x8@0Hz m [80ft] x istribution Amplifier (Splitter) VI compliance Up to WUXGA [90x00@0Hz] & UXGA [00x00@0Hz] Transmission over CATe Single-link MHz [.9Gbps] SP-00E imensions VI. VI.0 HCP compliance INICATION mm x 00mm x mm [.8 x.9 x. ] 0 x x 80mm [0. x.9 x. ] 0 x 0 x 90mm [ x x ] g [. lbs] 80g [. lbs] 0~90% RH [no condensation] Wall-mounting case with screws CV-[RX] VI- INPUT Cat.X OUTPUT - VI.0 compliant Extends the transmission length from the sources up to m (80ft) under XGA (0x8@0Hz) or m (0ft) under WUXGA (90x00@0Hz) Identical units work at both transmitting and receiving end Easy to install external power required Compact size irect plug-in Perfectly integrated with other VI over Cat.X series products 0~0 C [~0 F] VI INPUT VI OUTPUT Power Signal LE USB +V C -0~0 C [-~0 F] 0~90% RH [no condensation] x SP-00E x V power supply unit VI- OUTPUT Cat.X INPUT Watt [max] SP-00E CV-[TX] V A C x CV- SP-00E/SP-00E/SP-008E CV-/CV- Name VI. / Support HMI eep Color & HCP. compliant Wide Frequency Range: MHz ~ MHz :.Gbps Resolution up to 080p or WUXGA [90x00@0] EI learning HMI supports x.v.ycc, x.v.color & eep Color HMI Supports olby igital, TS-H Master Audio and olby TrueH audio formats USB firmware update for expanding compatibility Wall-mount housing design for easy installation -

4 x/ x/ x9 ual Link VI istribution Amplifier x VI Splitter with RS- VI VI VI Name SP-00 x dual link VI distribution amplifier (Splitter) VI compliance HMI compliance 0 MHz HCP compliance Up to 0x00 NO ES protection [] Human body model ±9kV [air-gap discharge] & ±kv [contact discharge] [] Core chipset ±kv -layer board [impedance control differential 00Ω; single 0Ω] Firmware update ES protection Feasible via RS- port CEC Channel TMS signal Volts [peak-to-peak, TTL] imensions VI-I [9-pin female digital only] 0 x x mm [8." x." x "] USB connector Standard type-b [square shape] 0 x x 80mm [0." x.9" x."] 0 x 0 x 90mm ['" x '" x "] RS IN Power Signal LE +V C - VI. compliant Wide Frequency Range: up to 0MHz EI learning using IP switch RS- firmware update for expanding compatibility RS- EI update Wall-mount housing design for easy installation V A C Serial control Ethernet VI- input V A C 0~90% RH [no condensation] VI- output USB Power LE +V C Watt [max] 0~0 C [~0 F] -0~0 C [-~0 F] x x C V A wall wart SP-00 Wall-mounting case with screws -0~0 C [-~0 F] Watt [max] 0~0 C [~0 F] x RS- VI connector Wall-mounting case with screws x VI / HMI [.ch audio & video] 9g [.0 lbs] ual link VI IN ual link VI OUT ual link VI OUT IP Switch x VI / HMI [.ch audio & video] + x RJ- g [.8oz] Volts [peak-to-peak, TTL] In/Out Feasible via USB-port INICATION E-9 -layer board [impedance control differential 00Ω; single 0Ω] C signal VI-I [9-pin female digital only] RS connector [] Human body model ±9kV [air-gap discharge] & ±kv [contact discharge] [] Core chipset ±kv TMS signal x VI VI connector TS-H Master Audio, olby TrueHM olby igital, TS, V-Audio, LPCM, SAC, MPCM CEC Channel x VI + x RS- Single-link MHz [.Gbps] Up to WUXGA [90x00@0Hz] & UXGA [00x00@0Hz] Firmware update C signal VI. HMI eep Color & x istribution Amplifier (Splitter) VI compliance VI. HCP compliance INICATION SP-00/SP-00/SP-009 Name x SP-00 x V A power supply unit HMI eep Color & /VI. compliant HCP. compliant Wide Frequency Range:MHz~MHz :.Gbps Resolution up to 080p or WUXGA[90x00@0] EI learning HMI supports x.v.ycc, x.v.color & eep Color HMI Supports olby igital, TS-H and olby TrueH audio formats USB firmware update for expanding compatibility Wall-mount housing design for easy installation -

5 x VI Splitter over Single Cat.X with HCP Support 8x8 VI Matrix with HCP Support [long range RX] [short range RX] VI compliance VI. HCP compliance With CV--RX: over category cable With CV-: 0m (00ft) at 00x00 m (0ft) at 00x00 x VI x VI x VI VI- [-pin male] [TX] Power LE IP SWITCH: VI- INPUT VI- Signal OUTPUT ~ USB +V C EQ 8x VI IR remote control INICATION Type VI-I [9-pin female] E-9 [9-pin -sub female] CV-[RX] Plastic molding 0 x 0 x 0mm [." x " x 0.8"] 0 x 00 x 9mm ['" x.9" x."] 0 x x 80mm [0." x.8" x."] 0 x x 0mm [." x." x."] 9 x 0 x 80mm ['" x '" x '"] 0 x 0 x 00mm ['." x '." x.8"] 0 x 0 x 00mm ['." x '." x.8"] [. lbs] 8g [.oz] 0g [.8oz] 98 [. lbs] 8g [.oz] Wall-mount with screws Wall-mount with screws V A C 0 Watts [max] Watt [max] 0. Watt [max] 0~0 C [~0 F] HMI founder Silicon Image chipsets embedded for superior compatibility and reliability VI. compliant Supports HCP Supports default VI EI and has the ability to learn the EI of displays Extends up to 0m (00ft) at UXGA 00x00@0Hz Extends up to 0m (00ft) at 0x8@0Hz Allows cascading Perfectly integrated with other VI over CAT series products Wall mountable 0 Watts [max] 0~0 C [~0 F] -0~0 C [-~0 F] 0~90% RH [no condensation] 8 9 MA-88H -0~0 C [-~0 F] 0~90% RH [no condensation] AC Power 00-0V 0g [oz] RU rack-mount with ears and wall hanging holes irect plug-in V A C Electro-optical characteristics: τ = / Carrier frequency: 8kHz RS- connector 8 x x mm [." x." x "] Push button / IR remote / RS-/Ethernet VI connector x x C V A in-line with C power cord 8x VI x RS- x Ethernet x 8 x 0mm [8." x." x."] -layer board [impedance control differential 00Ω; single 0Ω] selection Human body model ±9kV [air-gap discharge] & ±kv [contact discharge] WE/SS 8P8C with LE indicators -pin VGA(0x80)~WUXGA (90x00),80p~080p x RJ VI-I A [9-pin female] x RJ x RJ VI-I [9-pin female] Rotary switch ES protection -layer board [impedance control differential 00Ω; single 0Ω] RJ connector INICATION 0m (00ft) at 0x8 [] Core chipset ±8kV [] Human body model ±9kV [air-gap discharge] & ±kv [contact discharge] VI.0 [MA-88H] Single-link MHz [.9Gbps] Volts [peak-to-peak, TTL] True 8x8 VI matrix switcher VI compliance 0m (00ft) at 0x8 C signal imensions 8-level digital TMS signal MA-88H Up to (Single) WUXGA 90 0 Hz Video transmission VI connector Name Single-link MHz [.9Gbps] ES protection CV-[RX] MA-88H [TX] x istribution Amplifier VI VI VI Name -8 Source Status IR SENSOR Push Button & -segment LE Push Button & -segment LE Power Indicator 8 9 RS- Ethernet VI input VI output x MA-88H x Rack-mounting ears x IR remote x User Manual VI.0 compatible (single link), HCP compliant. Allows any source to be displayed on multiple displays at the same time Allows any VI display to view any VI source at any time Supports default EI and learns the EI of displays The matrix master unit can switch every output channels to any VI input via push button, IR remote control, RS- control or Ethernet control. Easy installation with rack-mounting Fast response time ~ seconds for channel switch -9

6