FD932DVD-LP-2-AV. Installation and Operation Manual. Low-Profile DVD PLAYER with AUDIO/VIDEO INPUTS. Revision Date: 06/26/2017 Page 1 of 21.

Transcription

1 Page 1 of 21 Installation and Operation Manual FD932DVD-LP-2-AV Low-Profile DVD PLAYER with AUDIO/VIDEO INPUTS

2 Page 2 of 21 Table of Contents General Information... 3 Features... 3 Additional Information... 3 Front View... 4 Cautions... 4 Specifications... 5 Installation Instructions... 5 Power... 5 Video Wiring Suggestions... 6 S-Composite and Audio Wiring... 6 Power and Ground Wiring... 6 Wiring Options... 7 Pinout for DB RCA Breakout Cable... 9 Remote Eye Ship it Items Operation Instructions Device Button Controls Remote Button Controls Auxiliary Panel Switch USB & SD Card Video File Types Technical Drawing Technical Support Instructions for Continued Airworthiness Warranty Information Revisions Log... 21

3 Page 3 of 21 General Information The FD932DVD-LP-2-AV is designed as a replacement for the popular FDS Avionics Corp. FD932DVD-4B. Like the FD932DVD-4B, AV inputs are provided on the front of the unit for connecting an external video or audio source. A switch on the front lets the user select between the DVD player and the auxiliary input. The selected source is then output to a monitor, speakers or Cabin Management System. Features Drop-In Replacement for obsolete FD932DVD-4B Easy access RCA inputs (front panel or DB-9 Optional Breakout Cable) Compatible with DVD/CD/SVCD/VCD/MP3 Back-Lit Front Panel Buttons USB/SD Media Player Full Function Remote Control Additional Information The FD932DVD-LP-2-AV must be controlled with the included remote. Navigate by utilizing the direction arrows. The FD932DVD-LP-2-AV can be used to charge small portable electronic devices when the player is in USB mode. User must plug in the USB device then use the remote control to select USB as the input device. The FD932DVD-LP-2-AV cannot play a DVD while the device is charging a connected USB device. The USB port can fast charge devices with up to a 5 Watt charge current requirement (Apple iphone, ipod, small Android, etc.). It will provide a slow/trickle charge for 10W ipads. The FD932DVD-LP-2-AV can play music, video and pictures from a thumb drive connected to the front panel USB connector. It cannot play content stored on an ipad through the USB port. FD932DVD-LP-2-AV will read the entire contents of the USB or SD card before opening the file display window. This window will display all folders on the left and the folder contents will be displayed on the right. The FD932DVD-LP-2-AV will always play the first song on the SD media upon starting. It does not recognize the last song played when turned off. The FD932DVD-LP-2-AV can support SD cards up to 2GB in Size. The FD932DVD-LP-2-AV will always play the first song upon starting. It does not recognize the last song played when turned off. The SD card can read up to 2GB.

4 Page 4 of 21 Front View FD932DVD-LP-2-AV Cautions In order to prevent damage to the FD932DVD-LP-2-AV, please follow the following precautions: Do not open and/or disassemble the unit. Do not attempt to insert a 3 disc (Mini-CD/Mini-DVD) Do not use sharp objects (such as pens, pencils, ice pick, etc.) to operate the buttons

5 Page 5 of 21 Specifications Material Aluminum, Steel Dimensions (W) x 1.98 (H) x 7.09 (D) Weight 2 lbs 8 oz Playable Discs DVD, VCD, Super-VCD, CD, and MP3 Video Output Resolution >500 lines, horizontal measurement Power AMPS AMPS Video Signal NTSC or PAL Operating Temperature 0-50 C ( F) Video Output (1) Composite Audio Output Standard Left/Right x2 Remote IR, included 1/16 Jack for Wired Remote Sensor Finish Matte Black Finish DO-160 Testing Cat B (Section 21) Installation Instructions Power 9 All cabin entertainment equipment, such as the FD932DVD-LP-2-AV, 1 should be installed on a non-essential bus and have a dedicated circuit breaker. It is necessary that a switch be installed in the cockpit so that the pilot can de-energize the entertainment system should it become necessary. The FD932DVD-LP-2-AV requires 12VDC rated at a minimum of.50 Amps or 28VDC rated at a minimum of.25 Amps to function. The rated current of the equipment should be taken into consideration when selecting wire gauge. It is the installer s responsibility to understand the product s requirements and to install the product in compliance with industry standards and safety.

6 Page 6 of 21 Video Wiring Suggestions Avoid routing video wiring parallel to: AC wiring Strobe wiring DC motor supply cables Inverter cabling Or any other potential noise source. S-Video/Composite and Audio Wiring Recommended cable for s-video/composite and audio purposes is PIC 75 Ohm Coax, P/N V This is a lightweight, flexible, and low signal loss cable which meets FAA flammability requirements of FAR (d), FAR (a) and FAR (a)(4). Similar aviation coaxial cable can be used from other vendors, as well. Some aircraft are prone to AC noise - we recommend adding to the composite source a 75 Ohm video isolation transformer such as Deerfield Laboratory, Inc. Part No ( (650) ). In most cases this should be added to the video output of the source. Power and Ground Wiring 22 AWG wire is recommended for Power and Ground applications.

7 Page 7 of 21 Wiring Pinout for DB-9 Part numbers for DB-9 connectors, manufactured by Amp: Connector P/N Crimp Contacts P/N M24308/2-281 M39029/ DB9 Pinout & Female Mating Face Profile Pin Number Description VDC Power* VDC Ground * 3 Composite Signal <OUT> 4 Audio Left Signal <OUT> 5 Audio Right Signal <OUT> 6 Composite/Audio - Ground 7 Composite <IN> 8 Audio Left Signal <IN> 9 Audio Right Signal <IN> *Optionally, the FD932DVD-LP-2 can be powered through the 4 pin Molex connector on the rear of the unit VDC RED N/C BLAN GND BLAC N/C BLAN

8 Page 8 of 21 There are two ways to connect an auxiliary input device to the FD932DVD-LP-2-AV: 1) Connect RCA AV inputs on the front face of the unit. OR 2) Connect pins 6, 7, 8 & 9 on the DB9 to a Composite Video/Audio source. NOTE: Do not connect both at the same time. Use the switch on the front to select between: 1. The DVD/USB/SD card OR 2. The AV RCA inputs connected to the front or Back DB-9 connector. Whichever is selected will be sourced on output pins 3, 4 & 5.

9 Page 9 of 21 RCA Breakout Cable FDS Avionics Corp. supplies an optional RCA breakout cable which allows for power on a DB9 connector with (3) RCA Connectors for Composite Video <OUT> (Yellow), Left Audio <OUT> (White), and Right Audio <OUT> (Red). Part numbers for DB-9 connectors, manufactured by Amp: Connector P/N Crimp Contacts P/N M24308/2-281 M39029/ DB9 Pinout & Female Mating Face Profile Pin Number Description VDC Power VDC Ground 3 N/C 4 N/C 5 N/C 6 Composite Video/Audio - Ground 7 Composite Video<IN> 8 Audio Left Signal <IN> 9 Audio Right Signal <IN> RCA Pinout & Male Mating Face Profile Center Shield Pin Description Center Signals - Composite (Yellow), Left Audio (White), Right Audio (Red) Shield Ground

10 Page 10 of 21 Remote Eye The FD932DVD-LP-2-AV has an available remote IR sensor ( remote eye ) that can be used to accept remote signals in addition to the main unit. For instance, the remote eye can be mounted by a monitor, to allow both the monitor and the DVD player to be controlled by pointing the remote at the same spot. The remote IR extension cable can be extended 10 feet from the FD932DVD-LP-2-AV.

11 Page 11 of 21 SHIP IT ITEMS PRODUCT FD932DVD-LP-2 SHIPPING MATERIALS 1 SHIPIT-DB9F-LATCH 1 REMOTE CONTROL

12 Page 12 of Optional RCA Breakout Cable 1 REMOTE IR EXTENSION CABLE 1 - FERRITE INSTALL

13 Page 13 of 21 1 FERRITE ( ND) Additional Shipping Materials (2) MOUNTING BRACETS (4) M4x6 SCREWS

14 Page 14 of 21 Operation Instructions To power the unit up, press the power button. The unit will light up and display a FDS Avionics Corp. logo on the display(s). Insert a CD or DVD into the slot, with label side up (away from the controls, if mounted vertically). The CD or DVD will load and automatically begin to play. The FD932DVD-LP-2-AV 2 does not retain the volume setting when powered down. When powered off either from the front panel on/off button or from the aircraft, it powers to half volume. Note: CDs and DVDs are recorded at different levels, so it is normal for DVDs to be quieter than CDs at the same volume setting. Device Button Controls BUTTON FUNCTION DESCRIPTION Power Turns on/off the unit. Play/ Pause/Stop Pauses or resumes play of a CD or DVD Previous/ Next Fast Forward/ Reverse SD/USB Eject Skips forward or backward through tracks (CD), files (MP3), or chapters (DVD). Fast forwards or reverses the playback of the CD or DVD Alternates the display between the CD/DVD player and the external inputs. Ejects the CD or DVD from the slot loader

15 Page 15 of 21 Remote Button Controls 1. Power 26. Angle 2. Menu 27. Repeat 3. Setup 28. Wide 4. Eject 29. Escape 5. Previous 30. Source 6. Rewind Title Dim Next 34. Channel+(**) 10. Fast Forward Sleep Display Stop 38. Channel-(**) 15. Up Arrow Mute Left Arrow Enter 42. Volume Up 19. Right Arrow Play/Pause 44. TFT (**) 21. Down Arrow 45. DVD 22. USB/SD 46. Volume Down 23. Subtitles 47. Change to Set A 24. Slow IR Commands 25. Zoom (Defaults) 48. Change to Set B IR Commands *The remote control for the FD932DVD-LP-2-AV supports two different sets of IR commands, but the unit itself only supports one. If the FD932DVD-LP-2-AV does not seem to be responding to remote control button presses, press either A or B to make the remote switch between IR command sets A and B. Please call the FDS Avionics Support Team to inquire about the Universal Remote if the need to support multiple DVD players on a single aircraft is present. ** Unused

16 Page 16 of 21 Auxiliary Panel Switch The FD932DVD-LP-2-AV has a toggle switch on the front panel. This switch allows the user to source either the DVD player or the AUX input connections located on the front & rear panels. Toggle the switch RIGHT to source the DVD player and LEFT to source the AUX inputs. See Figure 1 below: Figure 1: FD932DVD-LP-2-AV Toggle Switch

17 Page 17 of 21 USB & SD Card Video File Types The FD932DVD-LP-2 is capable of playing videos from the USB port and SD card slot on the front of the unit. Only certain types of files and encoding types are supported. This is a hardware limitation of the DVD player chipset and additional support cannot be added with firmware updates. The table below provides guidelines on compatible file types. Please note while the FD932DVD-LP-2 can play certain.mp4 files, not all.mp4 files are supported. MPEG-4 Part 2, also known as DivX and Xvid encoding is compatible based on the guidelines above. MPEG-4 Part 10, also known as H.264 encoding is not compatible. Please play close attention to the encoding type when converting and obtaining files for the FD932DVD-LP-2 DVD player.

18 Page 18 of 21 Technical Drawing

19 Page 19 of 21 Technical Support Should you have any questions concerning this product or other FDS Avionics Corp. products, please contact our Product Support representatives at (470) FDS Avionics Corp Shiloh Road Alpharetta, GA Phone: Fax: For further product information, technical data and sample wiring diagrams, please click on the Dealers section of our web site at Instructions for Continued Airworthiness The FD932DVD-LP-2-AV is designed not to require regular general maintenance.

20 Page 20 of 21 Limited Warranty All FDS Avionics Corp. (FDS) products are warranted to be free from material or manufacturing defects for a period of 24 months from the date of shipment for General Aviation customers or 12 months from the date of shipment for Government/Special Mission customers. Any material or repair workmanship for in warranty repair service will be specifically warranted for 90 days or the remainder of the original warranty period, whichever is longer. If the original warranty period has expired, the 90 day repair warranty is limited to the material and workmanship specific to the repair activity completed. The following conditions are exclusions to warranty coverage: 1. Labor costs associated with installation, removal or reinstallation of any product. 2. Damage to or malfunction caused by any unauthorized alteration made to the product. 3. Resolving signal quality issues caused by externally generated noise introduced by aircraft electrical systems or other components connected to any FDS product. 4. Any malfunction caused by improper installation or connection to aircraft wiring, industry standard cabin management/ inflight entertainment systems, or third party commercial equipment not specifically identified as compatible with FDS products. 5. Any malfunction caused by installation that does not conform to precautions associated with operating environments listed in the operating manual or consistent with industry best practices such as; high temperature, adequate ventilation, high humidity, high dust, or power surges. 6. Cosmetic damage or damage to internal components caused by installation or removal, failure to follow installation or operating instructions, or any neglect or misuse of the product. 7. Any product that is returned for service with a broken tamper evident seal, indicating tampering or improper handling of the product by an unauthorized person. Violation of product tamper evident seals or modification of factory installed serial and PMA labels voids any warranty, either expressed or implied. The FDS technical support team is available to provide distance troubleshooting support during business hours (8:00am to 5:00pm EST) Monday through Friday at (470) Many repair requests can be resolved through distance support and may not require return of merchandise to the factory. If a product must be returned to the factory for repair, an RMA number will be issued as directed by the technical support team and communicated by the repair coordinator. Upon request by the customer, FDS may send a service technician onsite to repair any non-pma products. The travel expenses incurred to include transportation, lodging and meals along with the technician s hourly rate shall be payable by the customer in accordance with FDS applicable rates and procedures. FDS Avionics Corp. will, upon receipt of returned merchandise, remanufacture or replace the unit at our discretion and return the product by Ground Return Shipping. Express return shipment will be the responsibility of the sender. This warranty is not transferable. Any implied warranties expire at the express limited warranty expiration date. FDS shall not be held liable for any indirect, special, punitive, incidental or consequential damages. Some states do not allow limitation on the length of an implied warranty. In such states, the exclusions or limitations of this limited warranty may not apply.

21 Page 21 of 21 Revisions Log Rev Date Page Description A 12/07/ Initial Release B 02/01/2011 All Removed product FD932DVD-LP-2-4B, Removed DB-15 Pinout, Updated product name descriptions, Updated cautions and remote control buttons, Updated DB-9 Pinout, Added important info to option 2 C 02/11/2011 Updated rear panel drawing, new remote eye pic D 04/28/2011 6,8 Revised power info, pinout E 06/03/ Added Region Code Info F 07/19/2011 5, 6,12 USB port updates, Added operating temperature G 8/17/ H 11/11/2013 8,13,16 Changed verbiage FROM: it powers up at max volume TO: it powers to half volume Changed Molex Conn. Power Option, Added Optional RCA Breakout Cable, Remote Control Update, Updated MSD Drawing, Added USB and SD Card Video File Type Information I 01/22/ ,13 Added picture for Optional RCA Breakout Cable J 02/24/ , 19, 20 Added Note on remote control options, added to troubleshooting page, corrected incorrect address. All New Format, New Company, New Branding