G2 Cradles. for ipod and iphone. Installation Guide/User manual

Transcription

1 G2 Cradles for ipod and iphone Installation Guide/User manual

2 2 Copyrights and Trademarks Copyright 2012 Audiovox Electronics Corporation The Audiovox and Audiovox Driven by DICE Electronics logos are trademarks of Audiovox Electronics Corporation ipod and iphone are trademarks of Apple, Inc. All Trademarks and Logos are the property of their respective owners. All rights reserved. Printed in the U.S.A.

3 3 Table of Contents Warning and safety...4 Product registration...6 Comparing G2 cradles...7 Compatible ipod/iphone models...8 Mounting option...9 Choose the correct holder...10 Installation...11 Long base installation...12 Adjusting the angle...13 A-DCR-50-PTH/A-DCR-300-CHG cradles Contents...15 Connecting the cradle...16 A-DCR-150-USB cradle Contents...18 Connecting the cradle...19 A-DCR-200-AVO cradles Contents...21 Connecting the cradle...22 Connecting to the rear seat entertainment system...23 What is ipod Out?...24 Wireless remote functions...25 Optional mounting base...26 Warranty...27

4 4 Warning and safety! Please read these instructions carefully before proceeding. Failure to follow instructions may result in improper operation or injury. Neither Audiovox Electronics Corporation nor Apple Inc., its regional offices, distributors or resellers take any responsibility for any damage or injury as a result of using the integration kit. - Do not open, disassemble or alter the product in any way. - Do not insert anything into the casing. - Do not cut or try to alter cables in any way and always use the correct connections. - Only operate unit when stationary or ask passengers to operate it for you. - Do not allow the Apple ipod/iphone to distract you from driving. - Exercise good judgement and keep your eyes on the road at all times. - Do not expose unit to extreme temperatures, humidity or shock. - Keep the unit and ipod/iphone away from fluids. - Keep away from children! - Interface components may contain small parts, can be broken or disassembled and components may become loose from vibration and heat. Small components and packaging materials may be a choking hazard when handled by children.

5 5 Installation warning You, the installer / the end user, agree not to install or connect the G2 cradle in a manner that would enable the driver of the vehicle to watch any video, movie or any kind of motion picture. Such installation and use is illegal and against the law! Be a responsible driver, and never be distracted from driving! The G2 cradle does not have any mechanism to prevent driver distraction, you hereby agree to be responsible when using a device attached to the G2 cradle, and use it at your own risk. The use of this product constitutes your understanding and agreement that you are solely responsible for any damage, or liability that may arise from use of this product, and you hereby indemnify the manufacturer of this product from any liability.

6 6 Congratulations on your purchase! Thank you for purchasing the G2 cradle. Please review our user manual and installation guide before operating the unit. Product registration In order to validate your warranty period and to receive telephone or online support, you MUST register your Audiovox product. To register your Audiovox product, please complete the following steps: 1. Visit 2. Look up and save the serial number of the product. 3. Complete the product registration form. 4. Submit the form. 5. Save the registration sheet in a safe place for future reference. If you are unable to complete the registration via internet, please call Audiovox at

7 7 Comparing G2 cradles A-DCR-50-PTH is a mounting solution compatible with the Silverline DUO and the Universal 150 kits sold by Audiovox, as well as with many 3rd party connectivity kits that have a 30 pin dock connector. A-DCR-150-USB is a mounting solution compatible with the MediaBridge and the Universal 200 kits sold by Audiovox, as well as with many 3rd party connectivity kits that have a USB port connector. A-DCR-200-AVO is a standalone mounting solution designed to enable ipod Out feature for rear seat entertainment applications. This cannot be used in conjunction with any connectivity kit. A-DCR-300-CHG is a 12V to 5V charge converter and mounting solution compatible with legacy 3rd party connectivity kits that have a 30 pin dock connector and supplied 12V charge power. G2 cradles are designed to securely hold your device without the use of protective cases or skins. You may be able to use a larger holder to accommodate certain cases, however the majority of the cases prevent proper seating of the dock connector thereby leading to unreliable operation.

8 8 Compatible ipod and iphone models 4/4S

9 9 Mounting option These holes are designed to allow you to screw the cradle base to AMPS standard mounts (ProClip TM, Kuda TM, etc). These holes are designed to fit vehicle mounts from igrip TM. Use the screws (x4) in the package to screw the cradle to AMPS standard mounts.

10 10 Choose the correct holder Compatible iphone/ipod model can be found here. iphone 0609r1 Each holder is designed for a different iphone/ipod model. Identify the holder by the printed text on the back of the holder and choose the correct holder for your iphone/ipod.

11 11 Installation Slide the correct holder onto the cradle until it clicks. Slide the iphone/ipod into the holder

12 12 Long base installation metal washer long base cradle nylon washer set screw If the long base will fit your car interior more appropriately than the short one, then please follow the illustration to attach the long base to the cradle. Turn the base clockwise to tighten the base to the cradle.

13 13 Adjusting the angle To adjust the angle of the cradle, first slide off the holder, then loosen the set screw enough for the cradle to move freely. When you are done adjusting the angle, hold the base and tighten the set screw, and slide the holder back to its place. DO NOT OVER TIGHTEN!

14 14 A-DCR-50-PTH / A-DCR-300-CHG cradles

15 15 G2 Cradle A-DCR-50-PTH/A-DCR-300-CHG contents A-DCR-50-PTH/A-DCR-300-CHG cradle with regular base and iphone 4 holder 6 additional holders long base 4 mounting screws

16 16 Connecting the cradle Attach the ipod dock cable from the kit or headunit into the connector on the back of the cradle. cable connects facing down (front view) (back view)

17 A-DCR-150-USB cradle 17

18 18 G2 Cradle A-DCR-150-USB contents 6 additional holders long base A-DCR-150-USB cradle with regular base and iphone 4 holder 4 mounting screws USB mini B connector

19 19 Connecting the cradle IMPORTANT! Pinout on 1/8 jack connector: left audio GND or factory or aftermarket radio with USB ipod port left video right audio USB mini B connection or USB cigarette lighter charger right optional cable video* *Video output only works when connected to an ipod video accessory, and should only be connected to and viewed on rear seat entertainment displays. USB type B connection MediaBridge or Universal RDS USB module

20 20 A-DCR-200-AVO cradle

21 MENU SOURCE PLAYLIST ARTIST ALBUM 21 G2 Cradle A-DCR-200-AVO contents A-DCR-200-AVO cradle with regular base and iphone 4 holder 4x additional holders long base 4 mounting screws USB mini B connector video cable USB cigarette lighter charger wireless remote

22 22 Connecting the cradle IMPORTANT! Pinout on 1/8 jack connector: GND left audio video right audio USB mini B connection left (white) right (red) USB cigarette lighter charger USB mini B connection ONLY FOR CHARGING video (yellow)

23 23 Connecting to the rear seat entertainment system A/V OUT cradle allows you to play your videos, TV shows and movies from ipod/iphone on your rear seat entertainment. Just follow the illustration to connect the cradle to the rear seat entertainment with the supplied video cable, you can then view your video contents on the screen of the rear seat entertainment system. Do NOT operate ipod while driving. Watching the screen and making selection while driving can lead to serious accident.

24 24 What is ipod Out? ipod Out is a new feature from Apple in ios5, which allows an ipod / iphone* to display an ipod interface on a connected external screen, and the G2 cradle (A-DCR-200-AVO) lets you do just that. It outputs the ipod music interface screen to your rear seat entertainment system for an easy access operation. ipod Playlists Artists Albums Songs Genres Now Playing *Only ipod touch and iphone support ipod Out. Do NOT operate ipod while driving. Watching the screen and making selection while driving can lead to serious accident.

25 25 Wireless remote functions MENU Go back to main menu SOURCE Enter / Exit ipod OUT mode. MENU Selecting between shuffle ON / OFF MENU SOURCE SOURCE Cycle through repeat OFF/ repeat ONE / repeat ALL Moving selection UP / DOWN Play / Pause Select menu item* Browsing selection ALPHABETICALLY* NEXT / PREVIOUS track Move selection RIGHT / LEFT* NEXT / PREVIOUS Album Fast Forward / Fast Rewind PLAYLIST ARTIST ALBUM NEXT / PREVIOUS Playlist 2 5 NEXT / PREVIOUS Artist * Additional features in ipod OUT mode only.

26 26 Optional mounting base The G2 cradle is best to be mounted on the vehicle specific mounting base, sold separately. Mounting base solution available from many suppliers, for example igrip TM or KUDA TM. Please visit for more details. igrip TM mounting base KUDA TM mounting base

27 27 12 MONTH LIMITED WARRANTY AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor. A game controller, if supplied, is similarly warranted for ninety (90) days. To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to the Company at the address shown below. This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to costs incurred for installation, removal or reinstallation of the product, or to damage to digital memory/media devices, gaming devices, discs, speakers, accessories, or vehicle electrical systems. This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/bar code label(s). THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights which vary from state to state. Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, New York

28 G2 Cradle OMA-DCR